Version: 2024.01
Loading Scheme...
CPC | COOPERATIVE PATENT CLASSIFICATION | |||
| Y10T | TECHNICAL SUBJECTS COVERED BY FORMER US CLASSIFICATION [2015-01] NOTE
|
Former US Class 24 series [2015-01] |
Y10T 24/00 | Buckles, buttons, clasps, etc. [2015-01] |
Y10T 24/10 | . | Miscellaneous [2015-01] |
Y10T 24/11 | . | Album fasteners [2015-01] |
Y10T 24/12 | . | Gun band type [2015-01] |
Y10T 24/13 | . | Article holder attachable to apparel or body [2015-01] |
Y10T 24/1303 | . . | Chatelaine safety hooks [2015-01] |
Y10T 24/1306 | . . | Flower [2015-01] |
Y10T 24/1309 | . . . | Pin attached [2015-01] |
Y10T 24/1312 | . . | Napkin [2015-01] |
Y10T 24/1315 | . . . | Hook [2015-01] |
Y10T 24/1318 | . . . | Neck enclosing [2015-01] |
Y10T 24/1321 | . . | Pencil [2015-01] |
Y10T 24/1324 | . . . | Clasp attached [2015-01] |
Y10T 24/1326 | . . . . | Finger ear, belt attached pencil holder [2015-01] |
Y10T 24/1329 | . . . . | Pencil holder with paper clip [2015-01] |
Y10T 24/1332 | . . . . | Combined and convertible pencil holder [2015-01] |
Y10T 24/1335 | . . . . | Container type pencil holder [2015-01] |
Y10T 24/1338 | . . . . | Separate pencil holder and pocket engaging clip [2015-01] |
Y10T 24/1341 | . . . . | Sliding jaw pencil holding clip [2015-01] |
Y10T 24/1344 | . . . . | Wire pencil holder [2015-01] |
Y10T 24/1347 | . . . . | Flexible shank pencil holder [2015-01] |
Y10T 24/135 | . . . . | with movable catch [e.g., pin pivoted lever, roller, etc.] [2015-01] |
Y10T 24/1353 | . . . . | Pivoted jaw pencil holder [2015-01] |
Y10T 24/1356 | . . . | Pin attached [2015-01] |
Y10T 24/1359 | . . . | Rule holder [2015-01] |
Y10T 24/1362 | . . | Sleeve holder [e.g., for inner coat] [2015-01] |
Y10T 24/1365 | . . | Pin attached [2015-01] |
Y10T 24/1368 | . . | Arm or leg carried holder [2015-01] |
Y10T 24/1371 | . . | Eyeglass holder including retaining means [2015-01] |
Y10T 24/1374 | . . | Neck supported holder [2015-01] |
Y10T 24/1376 | . . | Holder contains pocket engager [e.g., antitheft device, wallet protector] [2015-01] |
Y10T 24/1379 | . . | Key ring holder [2015-01] |
Y10T 24/1382 | . . | Receptacle type holder [2015-01] |
Y10T 24/1385 | . . . | Eyeglass or spectacle case [2015-01] |
Y10T 24/1388 | . . | Open-ended holster type holder [2015-01] |
Y10T 24/1391 | . . | Article held by clip with spring [e.g., leaf, coil] member [2015-01] |
Y10T 24/1394 | . . | Article held by clip [2015-01] |
Y10T 24/1397 | . . | Article held by flexible connector [e.g., chain] [2015-01] |
Y10T 24/14 | . | Bale and package ties, hose clamps [2015-01] |
Y10T 24/1402 | . . | Packet holders [2015-01] |
Y10T 24/1404 | . . . | Cord [2015-01] |
Y10T 24/1406 | . . . | Adjustable bands [2015-01] |
Y10T 24/1408 | . . . | Closed loops [2015-01] |
Y10T 24/141 | . . . | Plastic bands [2015-01] |
Y10T 24/1412 | . . | with tighteners [2015-01] |
Y10T 24/1414 | . . . | Wedge [2015-01] |
Y10T 24/1416 | . . . | Winder [2015-01] |
Y10T 24/1418 | . . . | Self-locking [dead center or snap action] [2015-01] |
Y10T 24/142 | . . . . | Adjustable girth [2015-01] |
Y10T 24/1422 | . . . . . | Rack bar [2015-01] |
Y10T 24/1424 | . . . | Lever [2015-01] |
Y10T 24/1427 | . . . | Worm and tooth [2015-01] |
Y10T 24/1429 | . . . . | Pivotal worm band clamp [2015-01] |
Y10T 24/1431 | . . . . | Radial worm band clamp [2015-01] |
Y10T 24/1433 | . . . | Integral thread [2015-01] |
Y10T 24/1435 | . . . . | External thread [2015-01] |
Y10T 24/1437 | . . . . . | Both ends threaded [2015-01] |
Y10T 24/1439 | . . . | Radial screw [2015-01] |
Y10T 24/1441 | . . . | Tangential screw [2015-01] |
Y10T 24/1443 | . . . . | Adjustable girth [2015-01] |
Y10T 24/1445 | . . . . . | Step adjustment [2015-01] |
Y10T 24/1447 | . . . . . . | Plural separable parts [2015-01] |
Y10T 24/1449 | . . . . | Wire [2015-01] |
Y10T 24/1451 | . . . . | Plural separable parts [2015-01] |
Y10T 24/1453 | . . . . | Pivotal strap parts [2015-01] |
Y10T 24/1455 | . . . . | Plural wrap [2015-01] |
Y10T 24/1457 | . . | Metal bands [2015-01] |
Y10T 24/1459 | . . . | Separate connections [2015-01] |
Y10T 24/1461 | . . . . | One piece [2015-01] |
Y10T 24/1463 | . . . . . | Sheet metal [2015-01] |
Y10T 24/1465 | . . . . . . | Buckle band connection [2015-01] |
Y10T 24/1467 | . . . . . . | Swedged sheet metal band connection [2015-01] |
Y10T 24/1469 | . . . . . . | End-to-end integral with band connecting means [2015-01] |
Y10T 24/1471 | . . . . | Pivoted parts [2015-01] |
Y10T 24/1473 | . . . . | Wedging parts [2015-01] |
Y10T 24/1476 | . . . . | Wire [2015-01] |
Y10T 24/1478 | . . . | Circumferentially swagged band clamp [2015-01] |
Y10T 24/148 | . . . | End-to-end integral band end connection [2015-01] |
Y10T 24/1482 | . . . | Ratchet and tool tightened band clamp [2015-01] |
Y10T 24/1484 | . . . | Spring closed band clamp [2015-01] |
Y10T 24/1486 | . . . | Screw locked band clamp [2015-01] |
Y10T 24/1488 | . . . | Swedged to lock band ends [2015-01] |
Y10T 24/149 | . . | Wire [2015-01] |
Y10T 24/1492 | . . . | Separate connections [2015-01] |
Y10T 24/1494 | . . . . | Wire [2015-01] |
Y10T 24/1496 | . . | Wooden bands [2015-01] |
Y10T 24/1498 | . . | Plastic band [2015-01] |
Y10T 24/15 | . | Bag fasteners [2015-01] |
Y10T 24/152 | . . | Swedged bag tie [2015-01] |
Y10T 24/153 | . . | Plastic band bag tie [2015-01] |
Y10T 24/155 | . . | Resilient slot bag tie [2015-01] |
Y10T 24/157 | . . | Twist-to-close bag tie [2015-01] |
Y10T 24/158 | . . | Slides to lock bag end within housing [2015-01] |
Y10T 24/16 | . | Belt fasteners [2015-01] |
Y10T 24/1604 | . . | Tighteners [2015-01] |
Y10T 24/1608 | . . | Hinged [2015-01] |
Y10T 24/1612 | . . . | Ring connected belt ends [2015-01] |
Y10T 24/1616 | . . . | Bent over flanged ends [2015-01] |
Y10T 24/162 | . . . | Pintle pin connected belt ends [2015-01] |
Y10T 24/1624 | . . . | V and round belts [2015-01] |
Y10T 24/1628 | . . . | Overlapped belt ends [2015-01] |
Y10T 24/1632 | . . . | Sheet metal knuckles, common pintle [2015-01] |
Y10T 24/1636 | . . . | Wire knuckles, common pintle [2015-01] |
Y10T 24/164 | . . . | Knuckle integral with belt material [2015-01] |
Y10T 24/1644 | . . . | Multiple pintles interconnected V-belt type [2015-01] |
Y10T 24/1648 | . . | Lacing [2015-01] |
Y10T 24/1652 | . . | One piece [2015-01] |
Y10T 24/1656 | . . . | Deflecting prong [2015-01] |
Y10T 24/166 | . . | Screw clamp [2015-01] |
Y10T 24/1664 | . . | Splices [2015-01] |
Y10T 24/1668 | . . | Wire [2015-01] |
Y10T 24/1672 | . . | Butt connected belt ends [2015-01] |
Y10T 24/1676 | . . | V, round, trapezoidal belts [2015-01] |
Y10T 24/168 | . . | Flanged belt ends, connector hold ends [2015-01] |
Y10T 24/1684 | . . | Lapped ends of endless belts [2015-01] |
Y10T 24/1688 | . . | Hinged ends of endless belts [2015-01] |
Y10T 24/1692 | . . | Wire strands reinforce belts [2015-01] |
Y10T 24/1696 | . . | Hook and loop type fastener and zipper belt end connection [2015-01] |
Y10T 24/17 | . | Buttoners [2015-01] |
Y10T 24/18 | . | Cuff holder [2015-01] |
Y10T 24/181 | . . | Adjustable [2015-01] |
Y10T 24/183 | . . | Sleeve clasp and button for cuff [2015-01] |
Y10T 24/184 | . . | Sleeve clasp and clasp for cuff [2015-01] |
Y10T 24/185 | . . | Sleeve clasp and hook for cuff [2015-01] |
Y10T 24/186 | . . | Sleeve clasp and pin for cuff [2015-01] |
Y10T 24/188 | . . | Sleeve pin and button for cuff [2015-01] |
Y10T 24/189 | . . | Pin fastener [2015-01] |
Y10T 24/19 | . | Necktie fastener [2015-01] |
Y10T 24/1903 | . . | Bands [2015-01] |
Y10T 24/1907 | . . . | End-securing pin [2015-01] |
Y10T 24/191 | . . . | Gripping [2015-01] |
Y10T 24/1914 | . . . | Depressors [2015-01] |
Y10T 24/1917 | . . . . | Button engaging [2015-01] |
Y10T 24/1921 | . . . . | Pin or spur [2015-01] |
Y10T 24/1924 | . . | Button engaging [2015-01] |
Y10T 24/1928 | . . . | Adjustable [2015-01] |
Y10T 24/1931 | . . . | Cord loop [2015-01] |
Y10T 24/1934 | . . . | Pivoted or sliding jaw [2015-01] |
Y10T 24/1938 | . . . | Pin attached [2015-01] |
Y10T 24/1941 | . . | Collar button combined [2015-01] |
Y10T 24/1945 | . . . | Clasp attached [2015-01] |
Y10T 24/1948 | . . . | Pin attached [2015-01] |
Y10T 24/1952 | . . . | Separable fastener [2015-01] |
Y10T 24/1955 | . . | Tie, attached hook [2015-01] |
Y10T 24/1959 | . . | Magnetic, adhesive, or snap type fastener connects tie to shirt [2015-01] |
Y10T 24/1962 | . . | Tie engaging loop with shirt engaging fastener [2015-01] |
Y10T 24/1966 | . . | Tie knot engaging and collar attaching [2015-01] |
Y10T 24/1969 | . . | Tie clip and shirt clasp attaching [2015-01] |
Y10T 24/1972 | . . | Tie clip and fastening pin [2015-01] |
Y10T 24/1976 | . . | Tie pin with shirt fastener [2015-01] |
Y10T 24/1979 | . . | Tie stiffener with shirt fastener [2015-01] |
Y10T 24/1983 | . . | with pivotal jaws having spring means [2015-01] |
Y10T 24/1986 | . . | Slider [2015-01] |
Y10T 24/199 | . . | Ornamental [2015-01] |
Y10T 24/1993 | . . . | Key shaped [2015-01] |
Y10T 24/1997 | . . | Resilient clasp [2015-01] |
Y10T 24/20 | . | Paper fastener [2015-01] |
Y10T 24/201 | . . | with screw threaded or notch engaging securing means [2015-01] |
Y10T 24/202 | . . | Resiliently biased [2015-01] |
Y10T 24/203 | . . . | including means to open or close fastener [2015-01] |
Y10T 24/204 | . . . . | Pivotally mounted on pintle [2015-01] |
Y10T 24/205 | . . . | One piece [2015-01] |
Y10T 24/206 | . . . . | Mounted on support means [2015-01] |
Y10T 24/207 | . . | Adhesive [2015-01] |
Y10T 24/208 | . . | Corner fastened [2015-01] |
Y10T 24/209 | . . | Paper-penetrating [2015-01] |
Y10T 24/21 | . | Strap tighteners [2015-01] |
Y10T 24/2102 | . . | Cam lever and loop [2015-01] |
Y10T 24/2104 | . . . | Step adjusted [2015-01] |
Y10T 24/2106 | . . . . | Ski boot and garment fasteners [2015-01] |
Y10T 24/2108 | . . . . | Split ring tightener [2015-01] |
Y10T 24/2109 | . . . . | Chain and rope tighteners [2015-01] |
Y10T 24/2111 | . . . . | Tire chain tighteners [2015-01] |
Y10T 24/2113 | . . . . | Strap tighteners [2015-01] |
Y10T 24/2115 | . . . . | Jewelry [2015-01] |
Y10T 24/2117 | . . . | Strap tighteners [2015-01] |
Y10T 24/2119 | . . . | Tie chain tighteners [2015-01] |
Y10T 24/2121 | . . . | Cargo tie down [2015-01] |
Y10T 24/2123 | . . . | Cover fasteners [2015-01] |
Y10T 24/2125 | . . . | Chain tighteners [2015-01] |
Y10T 24/2126 | . . . | Strap tightener machine [2015-01] |
Y10T 24/2128 | . . . | toggle actuated sliding jaw [2015-01] |
Y10T 24/213 | . . . | Jewelry [2015-01] |
Y10T 24/2132 | . . . | Split ring with tightener [2015-01] |
Y10T 24/2134 | . . . | Concrete form panels [2015-01] |
Y10T 24/2136 | . . . | Seat belt buckles [2015-01] |
Y10T 24/2138 | . . . | Chain, cable, wire tighteners, and anchors [2015-01] |
Y10T 24/214 | . . . | Envelope fasteners [2015-01] |
Y10T 24/2142 | . . . | Ski boot and garment fasteners [2015-01] |
Y10T 24/2143 | . . | Strap-attached folding lever [2015-01] |
Y10T 24/2145 | . . . | toggle latch [2015-01] |
Y10T 24/2147 | . . . | Strap tightener [2015-01] |
Y10T 24/2149 | . . . | Tire antiskid strap tightener [2015-01] |
Y10T 24/2151 | . . . | Seat belts [2015-01] |
Y10T 24/2153 | . . . | Split ring fasteners [2015-01] |
Y10T 24/2155 | . . . | Jewelry-watch straps [2015-01] |
Y10T 24/2157 | . . . | Tie downs [covers, articles] [2015-01] |
Y10T 24/2158 | . . . | Cable, wire, rope tightener [2015-01] |
Y10T 24/216 | . . . | Ski boot and garment fasteners [2015-01] |
Y10T 24/2162 | . . . | Dress hem raisers [2015-01] |
Y10T 24/2164 | . . | Midline [2015-01] |
Y10T 24/2166 | . . | Jewelry [2015-01] |
Y10T 24/2168 | . . | Seat belt [2015-01] |
Y10T 24/217 | . . | Accordion straps [2015-01] |
Y10T 24/2172 | . . | Parallel poles clamp [2015-01] |
Y10T 24/2174 | . . | form panels for walls [2015-01] |
Y10T 24/2175 | . . | Cargo tie down [2015-01] |
Y10T 24/2177 | . . | Chain tighteners [2015-01] |
Y10T 24/2179 | . . | Split band with tightener [2015-01] |
Y10T 24/2181 | . . | Tire chain tighteners [2015-01] |
Y10T 24/2183 | . . | Ski, boot, and shoe fasteners [2015-01] |
Y10T 24/2185 | . . | Fixed jaw with sliding or pivoted jaw [2015-01] |
Y10T 24/2187 | . . | Rack and pinion and circular tighteners [2015-01] |
Y10T 24/2189 | . . | Circular flange container clamp [2015-01] |
Y10T 24/2191 | . . | Strap stretching tools, tighteners, and sealers [2015-01] |
Y10T 24/2192 | . . | Buckle type [2015-01] |
Y10T 24/2194 | . . | Integral piece [2015-01] |
Y10T 24/2196 | . . | toggle [2015-01] |
Y10T 24/2198 | . . | Stocking top [2015-01] |
Y10T 24/22 | . | Trouser guards, clips, straps [e.g., above shoetops] [2015-01] |
Y10T 24/23 | . | Bedclothes holders [2015-01] |
Y10T 24/24 | . | T-head nongripping, fabric engaging type [2015-01] |
Y10T 24/25 | . | Zipper or required component thereof [2015-01] |
Y10T 24/2502 | . . | Plural zippers [2015-01] |
Y10T 24/2504 | . . . | Zipper chain [2015-01] |
Y10T 24/2505 | . . . | having surface sealing structure [2015-01] |
Y10T 24/2507 | . . | having slider or interconnected sliders with access opening for diverse-art member [2015-01] |
Y10T 24/2509 | . . | Plural independently movable sliders [2015-01] |
Y10T 24/2511 | . . | with distinct, stationary means for anchoring slider [2015-01] |
Y10T 24/2513 | . . . | and for aligning surfaces or obstructing slider movement [2015-01] |
Y10T 24/2514 | . . | with distinct member for sealing surfaces [2015-01] |
Y10T 24/2516 | . . | with distinct separable-fastener [2015-01] |
Y10T 24/2518 | . . | having coiled or bent continuous wire interlocking surface [2015-01] |
Y10T 24/252 | . . . | with stringer tape interwoven or knitted therewith [2015-01] |
Y10T 24/2521 | . . . | with stringer tape having specific weave or knit pattern [2015-01] |
Y10T 24/2523 | . . . | with core encircled by coils or bends [2015-01] |
Y10T 24/2525 | . . . | with mounting portion having structural formations complementary to stitching [2015-01] |
Y10T 24/2527 | . . . | Attached by stitching [2015-01] |
Y10T 24/2529 | . . . . | String or stringer tape having distinctive property [e.g., heat sensitive] [2015-01] |
Y10T 24/253 | . . . | with stringer tape having distinctive property [e.g., heat sensitive] [2015-01] |
Y10T 24/2532 | . . | having interlocking surface with continuous cross section [2015-01] |
Y10T 24/2534 | . . . | Opposed interlocking surface having dissimilar cross section [2015-01] |
Y10T 24/2536 | . . | having interlocking surface formed from single member with varying cross section [2015-01] |
Y10T 24/2538 | . . . | Opposed surface having dissimilar cross section [2015-01] |
Y10T 24/2539 | . . | Interlocking surface constructed from plural elements in series [2015-01] |
Y10T 24/2541 | . . . | having either noninterlocking element in, interrupted, or unequal length series [2015-01] |
Y10T 24/2543 | . . . | with element structural feature unrelated to interlocking or securing portion [2015-01] |
Y10T 24/2545 | . . . | Dissimilar opposed elements [2015-01] |
Y10T 24/2546 | . . . | Wire element [2015-01] |
Y10T 24/2548 | . . . | Preattached to mounting cord [2015-01] |
Y10T 24/255 | . . . | having interlocking portion with specific shape [2015-01] |
Y10T 24/2552 | . . . . | including symmetrical formations on opposite walls for engaging mating elements [2015-01] |
Y10T 24/2554 | . . . . | including complementary formations on opposite walls for engaging mating elements [2015-01] |
Y10T 24/2555 | . . . . . | Mating elements having reversed orientation of formations [2015-01] |
Y10T 24/2557 | . . . | having mounting portion with specific shape or structure [2015-01] |
Y10T 24/2559 | . . . . | including embracing jaws [2015-01] |
Y10T 24/2561 | . . | Slider having specific configuration, construction, adaptation, or material [2015-01] |
Y10T 24/2563 | . . . | including relatively movable spaced wings [i.e., restraining walls] [2015-01] |
Y10T 24/2564 | . . . | including converging channel and relatively movable separator island [2015-01] |
Y10T 24/2566 | . . . | including position locking-means attached thereto [2015-01] |
Y10T 24/2568 | . . . . | Protrusion on pull tab directly engaging interlocking surfaces [2015-01] |
Y10T 24/257 | . . . . | having surface engaging element shifted by reorientation of pull tab [2015-01] |
Y10T 24/2571 | . . . . . | Resilient or spring biased element [2015-01] |
Y10T 24/2573 | . . . . . . | Selectively shifted by either of two pull tabs [2015-01] |
Y10T 24/2575 | . . . . . . | with relatively movable link [2015-01] |
Y10T 24/2577 | . . . . . . | Biased by distinct spring [2015-01] |
Y10T 24/2579 | . . . . . . | having aperture cooperating with guide post [2015-01] |
Y10T 24/258 | . . . | including means preventing bunching of structure-to-be-secured or stringer [2015-01] |
Y10T 24/2582 | . . . | having specific contour or arrangement of converging channel, separator island, or wing [2015-01] |
Y10T 24/2584 | . . . . | Spaced segments of each wall of channel supported by different wings [2015-01] |
Y10T 24/2586 | . . . | including pull tab attaching means [2015-01] |
Y10T 24/2588 | . . . | including means for attaching components of slider together [2015-01] |
Y10T 24/2589 | . . . | with ornamental slider [2015-01] |
Y10T 24/2591 | . . | with means for concealing surfaces [2015-01] |
Y10T 24/2593 | . . | including complementary, aligning means attached to ends of interlocking surfaces [2015-01] |
Y10T 24/2595 | . . . | having specific mounting connection or reinforcing structure at connection [2015-01] |
Y10T 24/2596 | . . | including means attaching interlocking surfaces together [2015-01] |
Y10T 24/2598 | . . | including means for obstructing movement of slider [2015-01] |
Y10T 24/26 | . | Slit closing means including guides on opposite edges of slit and slidable bridging component [2015-01] |
Y10T 24/262 | . . | with hand-actuated lever for shifting bridging component [2015-01] |
Y10T 24/264 | . . | including structure linking and allowing variations in separation between opposite-guide-contacting portions of component [2015-01] |
Y10T 24/266 | . . | having bridging components attached in series along carrying element [2015-01] |
Y10T 24/268 | . . | having separate, independently movable, bridging components [2015-01] |
Y10T 24/27 | . | including readily dissociable fastener having numerous, protruding, unitary filaments randomly interlocking with, and simultaneously moving towards, mating structure [e.g., hook-loop type fastener] [2015-01] |
Y10T 24/2708 | . . | Combined with diverse fastener [2015-01] |
Y10T 24/2717 | . . | with distinct structure for sealing securement joint [2015-01] |
Y10T 24/2725 | . . | with feature facilitating, enhancing, or causing attachment of filament mounting surface to support therefor [2015-01] |
Y10T 24/2733 | . . | having filaments formed from continuous element interwoven or knitted into distinct, mounting surface fabric [2015-01] |
Y10T 24/2742 | . . | having filaments of varied shape or size on same mounting surface [2015-01] |
Y10T 24/275 | . . | with feature facilitating or causing attachment of filaments to mounting surface [2015-01] |
Y10T 24/2758 | . . . | Thermal or adhesive [2015-01] |
Y10T 24/2767 | . . | having several, repeating, interlocking formations along length of filaments [2015-01] |
Y10T 24/2775 | . . | having opposed structure formed from distinct filaments of diverse shape to those mating therewith [2015-01] |
Y10T 24/2783 | . . | having filaments constructed from coated, laminated, or composite material [2015-01] |
Y10T 24/2792 | . . | having mounting surface and filaments constructed from common piece of material [2015-01] |
Y10T 24/28 | . | Freight container to freight container fastener [2015-01] |
Y10T 24/29 | . | Drum or can spacer fastener [2015-01] |
Y10T 24/30 | . | Trim molding fastener [2015-01] |
Y10T 24/301 | . . | having externally threaded attaching means [2015-01] |
Y10T 24/302 | . . . | and laterally extending biasing appendage [2015-01] |
Y10T 24/303 | . . | having laterally extending biasing appendage [2015-01] |
Y10T 24/304 | . . | Resilient metal type [2015-01] |
Y10T 24/306 | . . . | Strip formed [2015-01] |
Y10T 24/307 | . . . | Sheet metal formed [2015-01] |
Y10T 24/308 | . . . | Wire formed [2015-01] |
Y10T 24/309 | . . | Plastic type [2015-01] |
Y10T 24/31 | . | Plural fasteners having intermediate flaccid connector [2015-01] |
Y10T 24/312 | . . | Chain connector [2015-01] |
Y10T 24/314 | . . | Elastic connector [2015-01] |
Y10T 24/316 | . . . | Strap connector [2015-01] |
Y10T 24/318 | . . | Strap connector [2015-01] |
Y10T 24/32 | . | having magnetic fastener [2015-01] |
Y10T 24/33 | . | having adhesive fastener [2015-01] |
Y10T 24/34 | . | Combined diverse multipart fasteners [2015-01] |
Y10T 24/3401 | . . | Buckle [2015-01] |
Y10T 24/3403 | . . . | and buckles [2015-01] |
Y10T 24/3404 | . . . . | having separate material adjustment means [2015-01] |
Y10T 24/3405 | . . . . | having separate disconnect means [2015-01] |
Y10T 24/3407 | . . . . . | Pivotal lever type [2015-01] |
Y10T 24/3408 | . . . . | having disconnect structure [2015-01] |
Y10T 24/3409 | . . . . . | Resilient cooperating means [2015-01] |
Y10T 24/3411 | . . . . | and pin [2015-01] |
Y10T 24/3412 | . . . . | Crossed belt accommodating [2015-01] |
Y10T 24/3413 | . . . | and clasp [2015-01] |
Y10T 24/3415 | . . . | and pin [2015-01] |
Y10T 24/3416 | . . . | and hook [2015-01] |
Y10T 24/3417 | . . . . | having disconnect means [2015-01] |
Y10T 24/3419 | . . . . | having penetrating prong [2015-01] |
Y10T 24/342 | . . . . | Buckle having plural receiving slots [2015-01] |
Y10T 24/3421 | . . . | including a button fastening element [2015-01] |
Y10T 24/3423 | . . . | and separable fastening means for attached fastener [2015-01] |
Y10T 24/3424 | . . . . | Snap fastener [2015-01] |
Y10T 24/3425 | . . . | having roller means [2015-01] |
Y10T 24/3427 | . . | Clasp [2015-01] |
Y10T 24/3428 | . . . | having pivoted members [2015-01] |
Y10T 24/3429 | . . . . | Cam type member [2015-01] |
Y10T 24/3431 | . . . . | Plural clasps [2015-01] |
Y10T 24/3432 | . . . . . | and toggle operator [2015-01] |
Y10T 24/3433 | . . . . . | Spring biased [2015-01] |
Y10T 24/3435 | . . . . . . | Coil [2015-01] |
Y10T 24/3436 | . . . . . | and cam [2015-01] |
Y10T 24/3437 | . . . . | Coil spring biased [2015-01] |
Y10T 24/3439 | . . . | Plural clasps [2015-01] |
Y10T 24/344 | . . . . | Resilient type clasp [2015-01] |
Y10T 24/3441 | . . . . . | and cam [2015-01] |
Y10T 24/3443 | . . . . . | Spring biased jaw [2015-01] |
Y10T 24/3444 | . . . . . | Circular work engageable [2015-01] |
Y10T 24/3445 | . . . . . | and pin attachment [2015-01] |
Y10T 24/3447 | . . . . . | and disconnect means [2015-01] |
Y10T 24/3448 | . . . | including a button fastening element [2015-01] |
Y10T 24/3449 | . . . | and hook [2015-01] |
Y10T 24/3451 | . . . . | having intermediate connector allowing movement [2015-01] |
Y10T 24/3452 | . . . . . | and adjustment means [2015-01] |
Y10T 24/3453 | . . . . | having gripping configuration on clasp jaw [2015-01] |
Y10T 24/3455 | . . . . . | Penetrating type [2015-01] |
Y10T 24/3456 | . . . . | having cam [2015-01] |
Y10T 24/3457 | . . . . | having separable jaws [2015-01] |
Y10T 24/3459 | . . . | and penetrating prong [2015-01] |
Y10T 24/346 | . . . | and pin [2015-01] |
Y10T 24/3461 | . . . . | having separate pin loss prevention means [2015-01] |
Y10T 24/3463 | . . . . . | Pin coextensive, coplanar, and contiguous with clasp jaw [2015-01] |
Y10T 24/3464 | . . . . | Pin coextensive, coplanar, and contiguous with clasp jaw [2015-01] |
Y10T 24/3465 | . . . . | Pin forms part of clasp jaw [2015-01] |
Y10T 24/3467 | . . | Pin [2015-01] |
Y10T 24/3468 | . . . | and pin [2015-01] |
Y10T 24/3469 | . . . . | and disconnect means [2015-01] |
Y10T 24/3471 | . . . . . | Hook and eye type [2015-01] |
Y10T 24/3472 | . . . . | and hook [2015-01] |
Y10T 24/3473 | . . . . . | having connector allowing movement [2015-01] |
Y10T 24/3475 | . . . . | having intermediate connector allowing movement [2015-01] |
Y10T 24/3476 | . . . | and hook [2015-01] |
Y10T 24/3477 | . . . . | having intermediate connector allowing movement [2015-01] |
Y10T 24/3479 | . . . . . | and adjustment means [2015-01] |
Y10T 24/348 | . . . . | Hook having locking means [2015-01] |
Y10T 24/3481 | . . . | including a button fastening element [2015-01] |
Y10T 24/3483 | . . . | and penetrating prong [2015-01] |
Y10T 24/3484 | . . | Hook [2015-01] |
Y10T 24/3485 | . . . | and hook [2015-01] |
Y10T 24/3487 | . . . . | having biasing spring [2015-01] |
Y10T 24/3488 | . . . . | Separately connected [2015-01] |
Y10T 24/3489 | . . . . | having securing means [2015-01] |
Y10T 24/3491 | . . . . . | Sliding [2015-01] |
Y10T 24/3492 | . . . . . | Snap type [2015-01] |
Y10T 24/3493 | . . . . . | Pivoted [2015-01] |
Y10T 24/3495 | . . . | having penetrating prong [2015-01] |
Y10T 24/3496 | . . . | including a button fastening element [2015-01] |
Y10T 24/3497 | . . | Button fastening element including another fastener element [2015-01] |
Y10T 24/3499 | . . | Penetrating prong [2015-01] |
Y10T 24/35 | . | Interchangeable button loop and pin [2015-01] |
Y10T 24/36 | . | Button with fastener [2015-01] |
Y10T 24/3602 | . . | Loss-preventing devices [2015-01] |
Y10T 24/3604 | . . | Adjustable [2015-01] |
Y10T 24/3606 | . . | Cloth shanks and covers [2015-01] |
Y10T 24/3609 | . . | Multiple attachment [2015-01] |
Y10T 24/3611 | . . | Deflecting prong or rivet [2015-01] |
Y10T 24/3613 | . . . | Anvil or plate [2015-01] |
Y10T 24/3615 | . . . | Integral [2015-01] |
Y10T 24/3617 | . . | Hinged leaf [2015-01] |
Y10T 24/3619 | . . . | Axially rotating [2015-01] |
Y10T 24/3621 | . . . | Double [2015-01] |
Y10T 24/3623 | . . . | Sliding [2015-01] |
Y10T 24/3626 | . . | Sliding bar [2015-01] |
Y10T 24/3628 | . . | Integral or rigid stud [2015-01] |
Y10T 24/363 | . . . | Bent sheet metal [integral] [2015-01] |
Y10T 24/3632 | . . | Link [2015-01] |
Y10T 24/3634 | . . . | Integral rubber button, extendable shank [2015-01] |
Y10T 24/3636 | . . . | Extendably connected [2015-01] |
Y10T 24/3638 | . . . | Pivoted leaf [2015-01] |
Y10T 24/364 | . . . | Releasably locked [2015-01] |
Y10T 24/3643 | . . . | French cuff [2015-01] |
Y10T 24/3645 | . . . | Tufting [2015-01] |
Y10T 24/3647 | . . . | Integral piece [2015-01] |
Y10T 24/3649 | . . | Pin attached [2015-01] |
Y10T 24/3651 | . . | Separable [2015-01] |
Y10T 24/3653 | . . . | Screw [2015-01] |
Y10T 24/3655 | . . . | Spring [2015-01] |
Y10T 24/3657 | . . . . | Resilient head [2015-01] |
Y10T 24/366 | . . . . | Resilient socket [2015-01] |
Y10T 24/3662 | . . . . | Rotating head [2015-01] |
Y10T 24/3664 | . . . . | with operating devices [2015-01] |
Y10T 24/3666 | . . | Separate thread bar [2015-01] |
Y10T 24/3668 | . . | Spiral fastener [2015-01] |
Y10T 24/367 | . . | Covers [2015-01] |
Y10T 24/3672 | . . . | Metal or plastic caps [2015-01] |
Y10T 24/3674 | . . | Pads [2015-01] |
Y10T 24/3677 | . . | Flexible button [2015-01] |
Y10T 24/3679 | . . | Swivel button [2015-01] |
Y10T 24/3681 | . . | Tufting type [2015-01] |
Y10T 24/3683 | . . | Button with cavity for friction grip fastener [2015-01] |
Y10T 24/3685 | . . | Button with shank for friction grip fastener [2015-01] |
Y10T 24/3687 | . . | Heat or adhesive secured type [2015-01] |
Y10T 24/3689 | . . | Thread or wire through apertured button [2015-01] |
Y10T 24/3691 | . . | Eye shank type button [2015-01] |
Y10T 24/3694 | . . | Ornamental type [2015-01] |
Y10T 24/3696 | . . | for cuff or collar [2015-01] |
Y10T 24/3698 | . . | Fabric embracing [2015-01] |
Y10T 24/37 | . | Drawstring, laced-fastener, or separate essential cooperating device therefor [2015-01] |
Y10T 24/3703 | . . | Includes separate device for holding drawn portion of lacing [2015-01] |
Y10T 24/3705 | . . . | Device engages tie in lacing [2015-01] |
Y10T 24/3708 | . . . . | and fully covers tie [2015-01] |
Y10T 24/3711 | . . . | Device engages element or formation on lacing [2015-01] |
Y10T 24/3713 | . . . | having relatively movable holding components or surfaces [2015-01] |
Y10T 24/3716 | . . . . | with pivotal connection therebetween [2015-01] |
Y10T 24/3718 | . . . . | with integral resilient linking structure therebetween [2015-01] |
Y10T 24/3721 | . . . . . | formed from wire [2015-01] |
Y10T 24/3724 | . . . | having lacing wound thereabout or wedged therein [2015-01] |
Y10T 24/3726 | . . | with holding means fixedly mounted on lacing [2015-01] |
Y10T 24/3729 | . . . | and forming lacing tips [2015-01] |
Y10T 24/3732 | . . | Includes lacing holding structure within directing means therefor [2015-01] |
Y10T 24/3734 | . . | having diverse shaped directing means for lacing [2015-01] |
Y10T 24/3737 | . . | having lacing directing means in particular pattern [2015-01] |
Y10T 24/3739 | . . | Includes lacing guiding roller within directing means [2015-01] |
Y10T 24/3742 | . . | having eyelet type directing means [2015-01] |
Y10T 24/3745 | . . . | with permanently deformed mounting structure [2015-01] |
Y10T 24/3747 | . . . . | Mounting structure formed from different material than directing passage [2015-01] |
Y10T 24/375 | . . | having hook shaped directing means [2015-01] |
Y10T 24/3753 | . . . | and movable component or surface for closing throat [2015-01] |
Y10T 24/3755 | . . . | Mounted by structure allowing bodily movement thereof [2015-01] |
Y10T 24/3758 | . . . | formed from wire [2015-01] |
Y10T 24/3761 | . . . | with mounting structure formed from different material [2015-01] |
Y10T 24/3763 | . . . | with permanently deformed mounting structure [2015-01] |
Y10T 24/3766 | . . . . | Expanding stud [2015-01] |
Y10T 24/3768 | . . | having loop or sleeve shaped directing means [2015-01] |
Y10T 24/3771 | . . . | Entirely formed from flaccid material [2015-01] |
Y10T 24/3774 | . . . | Mounted by structure allowing bodily movement thereof [2015-01] |
Y10T 24/3776 | . . . | formed from wire [2015-01] |
Y10T 24/3779 | . . . | with permanently deformed mounting structure [2015-01] |
Y10T 24/3782 | . . . . | Loop or sleeve closed when mounted [2015-01] |
Y10T 24/3784 | . . . . | Expanding stud [2015-01] |
Y10T 24/3787 | . . | having elastic segment in lacing [2015-01] |
Y10T 24/3789 | . . | having means covering tip of lacing [2015-01] |
Y10T 24/3792 | . . . | Tasseled [2015-01] |
Y10T 24/3795 | . . . | with plural components [2015-01] |
Y10T 24/3797 | . . . | with permanently deformed mounting structure [2015-01] |
Y10T 24/38 | . | Strap cable or pipe button [2015-01] |
Y10T 24/39 | . | Cord and rope holders [2015-01] |
Y10T 24/3902 | . . | Chain [2015-01] |
Y10T 24/3904 | . . . | Bead chain fasteners [2015-01] |
Y10T 24/3907 | . . | Sheathed strand [2015-01] |
Y10T 24/3909 | . . | Plural-strand cord or rope [2015-01] |
Y10T 24/3911 | . . | Friction disk [2015-01] |
Y10T 24/3913 | . . | Knot engaging [2015-01] |
Y10T 24/3916 | . . | One-piece [2015-01] |
Y10T 24/3918 | . . . | Wedge slot [2015-01] |
Y10T 24/392 | . . . | Wire [2015-01] |
Y10T 24/3922 | . . . . | Cord runs through center of coil [2015-01] |
Y10T 24/3924 | . . . | Sheet material [2015-01] |
Y10T 24/3927 | . . . | Slack adjuster [2015-01] |
Y10T 24/3929 | . . . | Rubber [2015-01] |
Y10T 24/3931 | . . . | Wire [2015-01] |
Y10T 24/3933 | . . . | Swagged, deformable [2015-01] |
Y10T 24/3936 | . . | Pivoted part [2015-01] |
Y10T 24/3938 | . . . | Lever tension [2015-01] |
Y10T 24/394 | . . . | Cam lever [2015-01] |
Y10T 24/3942 | . . . . | Laterally shifted rope [2015-01] |
Y10T 24/3944 | . . . . | Cam engaging or disengaging [2015-01] |
Y10T 24/3947 | . . . . | Fixed and movable jaws, movable jaw pulled [2015-01] |
Y10T 24/3949 | . . . . | Link-connected parallel jaws [2015-01] |
Y10T 24/3951 | . . . . | Dual cam [2015-01] |
Y10T 24/3953 | . . . | Pivotal means with plate aperture [2015-01] |
Y10T 24/3956 | . . . | Jaws locked together by cam, wedge, lever, or screw [2015-01] |
Y10T 24/3958 | . . | Screw clamp [2015-01] |
Y10T 24/396 | . . . | Screw clamp with snubber [2015-01] |
Y10T 24/3962 | . . . | Tangential bolt [2015-01] |
Y10T 24/3964 | . . . | J-shaped bolt [2015-01] |
Y10T 24/3967 | . . . | Bolt perpendicular to cable axis [2015-01] |
Y10T 24/3969 | . . | Sliding part or wedge [2015-01] |
Y10T 24/3971 | . . . | Rope looped about movable member [2015-01] |
Y10T 24/3973 | . . . | Rope clamped between cone and socket [2015-01] |
Y10T 24/3976 | . . . | Sliding ball [2015-01] |
Y10T 24/3978 | . . . | Screw actuated [2015-01] |
Y10T 24/398 | . . | Bendable, ductible [2015-01] |
Y10T 24/3982 | . . | Safety release [2015-01] |
Y10T 24/3984 | . . | Alignable aperture and spring pressed moving element [2015-01] |
Y10T 24/3987 | . . | Loop, adjustable [2015-01] |
Y10T 24/3989 | . . | Snubbers, cleats by dielectric loss [2015-01] |
Y10T 24/3991 | . . | Loop engaging [2015-01] |
Y10T 24/3993 | . . | Ball or roller [2015-01] |
Y10T 24/3996 | . . | Sliding wedge [2015-01] |
Y10T 24/3998 | . . | Helical preform [2015-01] |
Y10T 24/40 | . | Buckles [2015-01] |
Y10T 24/4002 | . . | Harness [2015-01] |
Y10T 24/4005 | . . . | Combined buckles and snap hooks [2015-01] |
Y10T 24/4007 | . . . | Lock [2015-01] |
Y10T 24/4009 | . . . . | Key [2015-01] |
Y10T 24/4012 | . . . | Clamping [2015-01] |
Y10T 24/4014 | . . . . | One-piece [2015-01] |
Y10T 24/4016 | . . . . | Pivoted part or lever [2015-01] |
Y10T 24/4019 | . . . . | Sliding part or wedge [2015-01] |
Y10T 24/4021 | . . . | Cross bails [2015-01] |
Y10T 24/4023 | . . . . | Pivoted stud plate [2015-01] |
Y10T 24/4026 | . . . . | Rigid stud [2015-01] |
Y10T 24/4028 | . . . | Penetrating tongue [2015-01] |
Y10T 24/403 | . . . . | Guarded [2015-01] |
Y10T 24/4033 | . . . . | One-piece [2015-01] |
Y10T 24/4035 | . . . . | Multiple [2015-01] |
Y10T 24/4037 | . . . . | Pivoted [2015-01] |
Y10T 24/404 | . . . . . | Lever actuated [2015-01] |
Y10T 24/4042 | . . . . . | Stud [2015-01] |
Y10T 24/4044 | . . . . | Sliding part or wedge [2015-01] |
Y10T 24/4047 | . . . | Strap loops and attaching devices [2015-01] |
Y10T 24/4049 | . . . | Loop shields [2015-01] |
Y10T 24/4051 | . . | Garment shielded [2015-01] |
Y10T 24/4053 | . . | Combined pressure bar and guard [2015-01] |
Y10T 24/4056 | . . . | Hook attached [2015-01] |
Y10T 24/4058 | . . | Penetrating prong [2015-01] |
Y10T 24/406 | . . . | One-piece [2015-01] |
Y10T 24/4063 | . . . . | Hook attached [2015-01] |
Y10T 24/4065 | . . . | Pivoted [2015-01] |
Y10T 24/4067 | . . . . | Hook attached [2015-01] |
Y10T 24/407 | . . . | Slide [2015-01] |
Y10T 24/4072 | . . | Pivoted lever [2015-01] |
Y10T 24/4074 | . . . | Hook attached [2015-01] |
Y10T 24/4077 | . . . | Looped strap [2015-01] |
Y10T 24/4079 | . . | Sliding part of wedge [2015-01] |
Y10T 24/4081 | . . . | Hook attached [2015-01] |
Y10T 24/4084 | . . . | Looped strap [2015-01] |
Y10T 24/4086 | . . | Looped strap [2015-01] |
Y10T 24/4088 | . . | One-piece [2015-01] |
Y10T 24/4091 | . . . | Hook attached [2015-01] |
Y10T 24/4093 | . . . | Looped strap [2015-01] |
Y10T 24/4095 | . . | Fabric covered [2015-01] |
Y10T 24/4098 | . . | Ornamental and/or object supported [2015-01] |
Y10T 24/41 | . | Pierced earring fastener [2015-01] |
Y10T 24/42 | . | Independent, headed, aperture pass-through fastener [2015-01] |
Y10T 24/43 | . | Fastener with revolving component wrapping structure-to-be-secured about fastener [2015-01] |
Y10T 24/44 | . | Clasp, clip, support-clamp, or required component thereof [2015-01] |
Y10T 24/44009 | . . | Gripping member adapted for tool actuation or release [2015-01] |
Y10T 24/44017 | . . | with specific mounting means for attaching to rigid or semirigid supporting structure or structure-to-be-secured [2015-01] |
Y10T 24/44026 | . . . | for cooperating with aperture in supporting structure or structure-to-be-secured [2015-01] |
Y10T 24/44034 | . . | Dissociable gripping members [2015-01] |
Y10T 24/44043 | . . . | Channel and inserted bar [2015-01] |
Y10T 24/44051 | . . . . | having operator or locking means [2015-01] |
Y10T 24/4406 | . . . . | Resilient channel or bar [2015-01] |
Y10T 24/44068 | . . | having gripping member actuated by fluid force [2015-01] |
Y10T 24/44077 | . . | having inserted and receiving interlocking members connected by bendable, nonbiasing strap [2015-01] |
Y10T 24/44085 | . . . | Discrete flaccid strap [2015-01] |
Y10T 24/44094 | . . . . | with distinct means for preventing separation of members [2015-01] |
Y10T 24/44103 | . . . . . | Slidably mounted [2015-01] |
Y10T 24/44111 | . . . . | with separate flaccid flap or pocket for protecting structure-to-be-secured [2015-01] |
Y10T 24/4412 | . . . . | with separate, cavity-blocking gate on receiving member [2015-01] |
Y10T 24/44128 | . . . . | Resilient inserted or receiving member [2015-01] |
Y10T 24/44137 | . . . . . | Inserted or receiving member substantially covered or coated for protection or to promote gripping [2015-01] |
Y10T 24/44145 | . . . . . | Resilient inserted member [2015-01] |
Y10T 24/44154 | . . . . . . | having engaging face formed from nonmetallic material [2015-01] |
Y10T 24/44162 | . . . . . . . | having head and neck type engaging face [2015-01] |
Y10T 24/44171 | . . . . . . . . | having internal supporting or reinforcing element [2015-01] |
Y10T 24/44179 | . . . . . . . . . | Circular head or neck [2015-01] |
Y10T 24/44188 | . . . . | having wedge shaped, inserted and receiving members [2015-01] |
Y10T 24/44197 | . . . . | with specific means for attaching to flaccid strap or supporting strap [2015-01] |
Y10T 24/44205 | . . . . . | On the inserted member [2015-01] |
Y10T 24/44214 | . . . . | having necked button sliding along length of closed, variable width loop [2015-01] |
Y10T 24/44222 | . . | having flaccid gripping member [2015-01] |
Y10T 24/44231 | . . . | formed from elastic material [2015-01] |
Y10T 24/44239 | . . | Encircling gripping member including semirigid band and operator for tightening [2015-01] |
Y10T 24/44248 | . . | Encircling gripping member including semirigid band and means for adjusting girth [2015-01] |
Y10T 24/44256 | . . | with specifically shaped, nongripping, rigid structure for connecting independently operable clasps, clips, or support-clamps [2015-01] |
Y10T 24/44265 | . . | Gripping member face integral with or rigidly affixed to screw-driving portion [2015-01] |
Y10T 24/44274 | . . | having either discrete flaccid or thin, nonbiasing, integral, connecting hinge [2015-01] |
Y10T 24/44282 | . . | having equally spaced or continual gripping faces revolving about central axis [2015-01] |
Y10T 24/44291 | . . | including pivoted gripping member [2015-01] |
Y10T 24/44299 | . . . | Pivoted member also slides [2015-01] |
Y10T 24/44308 | . . . . | Tapered face [2015-01] |
Y10T 24/44316 | . . . | Pivoting gripping member either supports or coacts with sliding engaging face [2015-01] |
Y10T 24/44325 | . . . | having three or more pivotally connected gripping members [2015-01] |
Y10T 24/44333 | . . . | having toggle operator for moving [2015-01] |
Y10T 24/44342 | . . . | having rigid linking arm pivotally connected to each gripping member [2015-01] |
Y10T 24/4435 | . . . . | with extended lever portion [2015-01] |
Y10T 24/44359 | . . . . . | having lever end modified for attachment to support [2015-01] |
Y10T 24/44368 | . . . | Pivoted gripping member applies camming force [2015-01] |
Y10T 24/44376 | . . . | Spring or resiliently biased about pivot [2015-01] |
Y10T 24/44385 | . . . . | Distinct spring [2015-01] |
Y10T 24/44393 | . . . . . | Attached solely by spring [2015-01] |
Y10T 24/44402 | . . . . . | with operator for moving pivoted member [2015-01] |
Y10T 24/4441 | . . . . . . | Camming or wedging element [2015-01] |
Y10T 24/44419 | . . . . . . . | Pivoted or rotated element [2015-01] |
Y10T 24/44427 | . . . . . | with position locking-means for gripping members [2015-01] |
Y10T 24/44436 | . . . . . . | including pivoted arm [2015-01] |
Y10T 24/44444 | . . . . . | having specific surface material or irregularity on or along engaging face [2015-01] |
Y10T 24/44453 | . . . . . | having specific handle structure [2015-01] |
Y10T 24/44462 | . . . . . | Coil spring [2015-01] |
Y10T 24/4447 | . . . . . . | having coil portion coaxial or parallel with pivotal axis [2015-01] |
Y10T 24/44479 | . . . . . | Flat or leaf spring [2015-01] |
Y10T 24/44487 | . . . | Closed by gravity or weight of structure-to-be-secured [2015-01] |
Y10T 24/44496 | . . . | with operator means for moving pivoted member [2015-01] |
Y10T 24/44504 | . . . . | Threaded cylindrical rod and mating cavity [2015-01] |
Y10T 24/44513 | . . . . | Camming or wedging element [2015-01] |
Y10T 24/44521 | . . . . . | Pivoted or rotated element [2015-01] |
Y10T 24/4453 | . . . | with position locking-means for gripping members [2015-01] |
Y10T 24/44538 | . . . . | Integral locking-means [2015-01] |
Y10T 24/44547 | . . . | having inserted and receiving interlocking engaging faces [2015-01] |
Y10T 24/44556 | . . . . | Resilient gripping member [2015-01] |
Y10T 24/44564 | . . . | having specific surface material or irregularity on or along engaging face [2015-01] |
Y10T 24/44573 | . . | including track or way guided and retained gripping member [2015-01] |
Y10T 24/44581 | . . . | Biased by distinct spring [2015-01] |
Y10T 24/4459 | . . . | with operator for moving guided member [2015-01] |
Y10T 24/44598 | . . . . | Threaded cylindrical rod and mating cavity [2015-01] |
Y10T 24/44607 | . . . | Track or way oblique to path of gripping member [2015-01] |
Y10T 24/44615 | . . . | with position locking-means for gripping members [2015-01] |
Y10T 24/44624 | . . . . | Integral locking-means [2015-01] |
Y10T 24/44632 | . . . | with specific mounting means for attaching to flaccid supporting structure or structure-to-be-secured [2015-01] |
Y10T 24/44641 | . . | having gripping member formed from, biased by, or mounted on resilient member [2015-01] |
Y10T 24/4465 | . . . | Integrally combined, independently operable, diverse clasps, clips, or support-clamps [2015-01] |
Y10T 24/44658 | . . . | with specific means for mounting to flaccid supporting structure or structure-to-be-secured [2015-01] |
Y10T 24/44667 | . . . . | Mounting means made entirely from integral wire portion of resilient gripping member [2015-01] |
Y10T 24/44675 | . . . . . | Wire coiled about flaccid supporting structure [2015-01] |
Y10T 24/44684 | . . . | with operator for moving biased engaging face [2015-01] |
Y10T 24/44692 | . . . . | Camming or wedging element [2015-01] |
Y10T 24/44701 | . . . . . | Encircling sleeve type element [2015-01] |
Y10T 24/44709 | . . . . . | Pivoted or rotated element [2015-01] |
Y10T 24/44718 | . . . . . . | Element pivots or rotates in plane parallel to plane bisecting opposed engaging faces [2015-01] |
Y10T 24/44726 | . . . . . . | Elongated element with pivot between cam and handle portions [2015-01] |
Y10T 24/44735 | . . . . . . . | for moving engaging face of U-shaped gripping member [2015-01] |
Y10T 24/44744 | . . . | with position locking-means for engaging faces [2015-01] |
Y10T 24/44752 | . . . . | Integral locking-means [2015-01] |
Y10T 24/44761 | . . . . | Pivoted lock member [2015-01] |
Y10T 24/44769 | . . . | Opposed engaging faces on gripping member formed from single piece of resilient material [2015-01] |
Y10T 24/44778 | . . . . | Piece totally forms clasp, clip, or support-clamp and has shaped, wirelike, or bandlike configuration with uniform cross section throughout its length [2015-01] |
Y10T 24/44786 | . . . . . | Opposed faces located in and bias towards common plane in nonuse position [2015-01] |
Y10T 24/44795 | . . . . . | Resilient gripping member having tightly twisted portion [2015-01] |
Y10T 24/44803 | . . . . . | Resilient gripping member having coiled portion [2015-01] |
Y10T 24/44812 | . . . . . . | Convolutions of coil form faces [2015-01] |
Y10T 24/44821 | . . . . . | Relatively movable segments of resilient gripping member contact and cross in nonuse position [2015-01] |
Y10T 24/44829 | . . . . . . | Segments form opposed engaging faces [2015-01] |
Y10T 24/44838 | . . . . . . . | having specific handle structure [2015-01] |
Y10T 24/44846 | . . . . . . | having specific handle structure [2015-01] |
Y10T 24/44855 | . . . . . | Terminal end of resilient member having engagement or disengagement enhancing structural modifications [2015-01] |
Y10T 24/44863 | . . . . . | having specific surface irregularity on or along engaging face [2015-01] |
Y10T 24/44872 | . . . . | having specific handle structure [2015-01] |
Y10T 24/4488 | . . . . . | Movably attached to gripping member [2015-01] |
Y10T 24/44889 | . . . . | Interlocking faces [2015-01] |
Y10T 24/44897 | . . . . | with reinforcing member [2015-01] |
Y10T 24/44906 | . . . . | having specific surface irregularity on or along engaging face [2015-01] |
Y10T 24/44915 | . . . . . | Corrugated or toothed face [2015-01] |
Y10T 24/44923 | . . . . | Clasp, clip, or support-clamp cut or shaped from a single sheet of resilient, uniformly thick, planar material [2015-01] |
Y10T 24/44932 | . . . | having specific surface material or irregularity on or along engaging face [2015-01] |
Y10T 24/4494 | . . . | having specific handle structure [2015-01] |
Y10T 24/44949 | . . . | including resilient biasing wire [2015-01] |
Y10T 24/44957 | . . . . | Coiled wire [2015-01] |
Y10T 24/44966 | . . | having gripping member shifted by operator [2015-01] |
Y10T 24/44974 | . . . | Threaded cylindrical rod and mating cavity [2015-01] |
Y10T 24/44983 | . . | formed from single rigid piece of material [2015-01] |
Y10T 24/44991 | . . . | having specific surface irregularity on or along engaging face [2015-01] |
Y10T 24/45 | . | Separable-fastener or required component thereof [e.g., projection and cavity to complete interlock] [2015-01] |
Y10T 24/45005 | . . | with third detached member completing interlock [e.g., hook type] [2015-01] |
Y10T 24/4501 | . . . | Quick connect or release [e.g., spring and detent] [2015-01] |
Y10T 24/45016 | . . . | for jewelry [2015-01] |
Y10T 24/45021 | . . . | including eyelet [e.g., shoes] [2015-01] |
Y10T 24/45026 | . . . | for key holder [2015-01] |
Y10T 24/45031 | . . . | for tire chain, strap, etc. [e.g., rotatable or sliding spring gate] [2015-01] |
Y10T 24/45037 | . . . | for apparel and related accessories [2015-01] |
Y10T 24/45042 | . . . . | Button, button related [2015-01] |
Y10T 24/45047 | . . . . . | Snap [e.g., key hole type] [2015-01] |
Y10T 24/45052 | . . . . | Post and receiver [e.g., pin and slot] [2015-01] |
Y10T 24/45058 | . . . . | Hook [e.g., within cavity] [2015-01] |
Y10T 24/45063 | . . . . | Belt, strap, etc. [e.g., buckle or snap fastener] [2015-01] |
Y10T 24/45068 | . . . . | Glove [2015-01] |
Y10T 24/45073 | . . . . | Purse, wallet, etc. [2015-01] |
Y10T 24/45079 | . . . | Belt, strap, harness, etc. [2015-01] |
Y10T 24/45084 | . . . . | for safety belt buckle, strap, harness, etc. [2015-01] |
Y10T 24/45089 | . . . | Sliding or rotating element [2015-01] |
Y10T 24/45094 | . . . . | Element having key slot [2015-01] |
Y10T 24/45099 | . . . | Resilient element [e.g., snap type] [2015-01] |
Y10T 24/45105 | . . . . | for upholstery, panel, trim strip, etc. [e.g., spring biased] [2015-01] |
Y10T 24/4511 | . . . . | Link with pivoted gate [2015-01] |
Y10T 24/45115 | . . . | Hook [2015-01] |
Y10T 24/4512 | . . . . | Snap with spring bias [e.g., gate] [2015-01] |
Y10T 24/45126 | . . . . | for connecting chains [e.g., opposed pivoted hook] [2015-01] |
Y10T 24/45131 | . . . . | for heavy load bearing device [e.g., chain, rope, cable, etc.] [2015-01] |
Y10T 24/45136 | . . . . . | Haim, harness, whiffletree, rein, etc. [2015-01] |
Y10T 24/45141 | . . . | for chain, rope, cable, etc. [2015-01] |
Y10T 24/45147 | . . . . | Coupler with sliding socket to complete interlock [2015-01] |
Y10T 24/45152 | . . | Each mating member having similarly shaped, sized, and operated interlocking or intermeshable face [2015-01] |
Y10T 24/45157 | . . . | Zipper-type [e.g., slider] [2015-01] |
Y10T 24/45162 | . . . . | for garment [e.g., with ribs and grooves interlocking elements] [2015-01] |
Y10T 24/45168 | . . . . | for container [e.g., bag] [2015-01] |
Y10T 24/45173 | . . . | Resilient element [2015-01] |
Y10T 24/45178 | . . . . | Snap [e.g., identical elements] [2015-01] |
Y10T 24/45183 | . . . | Clasp [e.g., spring type] [2015-01] |
Y10T 24/45188 | . . . . | for jewelry [e.g., buckle type] [2015-01] |
Y10T 24/45194 | . . . . | for belt or strap [2015-01] |
Y10T 24/45199 | . . . | Hook [2015-01] |
Y10T 24/45204 | . . . . | for belt, strap, etc. [e.g., with pivoted gate locking member] [2015-01] |
Y10T 24/45209 | . . . . | for apparel [2015-01] |
Y10T 24/45215 | . . . | Slot and tab or tongue [2015-01] |
Y10T 24/4522 | . . . | Sliding or rotating element [2015-01] |
Y10T 24/45225 | . . | including member having distinct formations and mating member selectively interlocking therewith [2015-01] |
Y10T 24/4523 | . . . | Hook [2015-01] |
Y10T 24/45236 | . . . . | Multiple catch [e.g., with pivoted gate] [2015-01] |
Y10T 24/45241 | . . . | Slot and tab or tongue [2015-01] |
Y10T 24/45246 | . . . . | having teeth or serrations [e.g., sliding with respect to each other] [2015-01] |
Y10T 24/45251 | . . . | Resilient element [e.g., with spring] [2015-01] |
Y10T 24/45257 | . . . . | Snap with cavity [2015-01] |
Y10T 24/45262 | . . . | Pin, post and receiver [2015-01] |
Y10T 24/45267 | . . . | Notched clasp [e.g., with receiving slot] [2015-01] |
| Y10T 24/45272 (Frozen) | . . . | Projection passes through cavity then moves toward noninserted portion of its member to complete interlock [e.g., snap hook] [2021-05] WARNING
|
Y10T 24/45277 (Frozen) | . . . . | Entire projection member forms loop or ring when interlocked [2021-05] |
Y10T 24/45283 (Frozen) | . . . . . | Includes slidable gate closing entrance throat [2021-05] |
Y10T 24/45288 (Frozen) | . . . . | Hook type projection member [2021-05] |
Y10T 24/45293 (Frozen) | . . . . . | Plural hooks entering opposite sides of same cavity [2021-05] |
Y10T 24/45298 (Frozen) | . . . . . . | Hooks formed solely from wire [2021-05] |
Y10T 24/45304 (Frozen) | . . . . . | Noninserted portion of projection member includes movably connected gate for closing access throat [2021-05] |
Y10T 24/45309 (Frozen) | . . . . . . | Threaded gate [2021-05] |
Y10T 24/45314 (Frozen) | . . . . . . | Revolvably mounted disc shaped gate [2021-05] |
Y10T 24/45319 (Frozen) | . . . . . . | Pivotally connected gate [2021-05] |
Y10T 24/45325 (Frozen) | . . . . . . . | Gate swings transversely to plane of hook [2021-05] |
Y10T 24/4533 (Frozen) | . . . . . . . | Gate also slides relative to pivot [2021-05] |
Y10T 24/45335 (Frozen) | . . . . . . . | having means biasing gate about pivot [2021-05] |
Y10T 24/4534 (Frozen) | . . . . . . . . | and position locking-means for gate [2021-05] |
Y10T 24/45346 (Frozen) | . . . . . . . . | Includes distinct biasing spring [2021-05] |
Y10T 24/45351 (Frozen) | . . . . . . . . . | Coil type spring [2021-05] |
Y10T 24/45356 (Frozen) | . . . . . . . . . . | Coiled about pivotal axis of gate [2021-05] |
Y10T 24/45361 (Frozen) | . . . . . . . | having position locking-means for gate [2021-05] |
Y10T 24/45366 (Frozen) | . . . . . . . . | Locking-means pivotally connected [2021-05] |
Y10T 24/45372 (Frozen) | . . . . . . . . | Locking-means slidably mounted [2021-05] |
Y10T 24/45377 (Frozen) | . . . . . . . | Gate closes when structure-to-be-secured is tensioned [2021-05] |
Y10T 24/45382 (Frozen) | . . . . . . | Track or way guided gate [2021-05] |
Y10T 24/45387 (Frozen) | . . . . . . . | having means biasing gate [2021-05] |
Y10T 24/45393 (Frozen) | . . . . . . . . | Guide of gate encircles shank [2021-05] |
Y10T 24/45398 (Frozen) | . . . . . . . . | Cavity in shank forms track or way [2021-05] |
Y10T 24/45403 (Frozen) | . . . . . . . . . | with position locking-means for gate [2021-05] |
Y10T 24/45408 (Frozen) | . . . . . . | Resilient, self-biased gate [2021-05] |
Y10T 24/45414 (Frozen) | . . . . . . . | with position locking-means for gate [2021-05] |
Y10T 24/45419 (Frozen) | . . . . . . . | Gate and hook formed from plastic [2021-05] |
Y10T 24/45424 (Frozen) | . . . . . . . | Gate and hook formed solely from wire [2021-05] |
Y10T 24/45429 (Frozen) | . . . . . . . | Gate and hook formed from single piece of sheet metal [2021-05] |
Y10T 24/45435 (Frozen) | . . . . . | Projection pivotally attached to shank or mounting structure [2021-05] |
Y10T 24/4544 (Frozen) | . . . . . | Projection slidably mounted to shank or mounting structure [2021-05] |
Y10T 24/45445 (Frozen) | . . . . . | Projection self-biased towards shank or mounting structure [2021-05] |
Y10T 24/4545 (Frozen) | . . . . . . | and formed solely from wire [2021-05] |
Y10T 24/45455 (Frozen) | . . . . . . . | Cooperating with relatively stationary wire gate [2021-05] |
Y10T 24/45461 | . . . | Interlocking portion actuated or released responsive to preselected condition [e.g., heat, pressure] [2015-01] |
Y10T 24/45466 | . . . | having electric or fluid powered, actuation or release, of interlock [2015-01] |
Y10T 24/45471 | . . . | Projection having movable connection between components thereof or variable configuration [2015-01] |
Y10T 24/45476 | . . . . | with additional, similar projection for engaging different cavity [2015-01] |
Y10T 24/45482 | . . . . | and operator therefor [2015-01] |
Y10T 24/45487 | . . . . . | including camming or wedging element on projection member [2015-01] |
Y10T 24/45492 | . . . . . . | Pivotally attached element [2015-01] |
Y10T 24/45497 | . . . . | including pivotal connection between projection components [2015-01] |
Y10T 24/45503 | . . . . . | Component slides relative to connection [2015-01] |
Y10T 24/45508 | . . . . . | and spring or resilient extension biasing about pivot [2015-01] |
Y10T 24/45513 | . . . . | including slidably guided connection between nonself-biasing projection components [2015-01] |
Y10T 24/45518 | . . . . . | and distinct spring biasing component [2015-01] |
Y10T 24/45524 | . . . . | including resiliently biased projection component or surface segment [2015-01] |
Y10T 24/45529 | . . . . . | Requiring manual force applied against bias to interlock or disengage [2015-01] |
Y10T 24/45534 | . . . . . . | having connected leading edge and separated trailing arms [2015-01] |
Y10T 24/45539 | . . . . . | Cooperating with cavity having side walls and axially biased component capping end [2015-01] |
Y10T 24/45545 | . . . . . | forming total external surface of projection [2015-01] |
Y10T 24/4555 | . . . . . . | and encircling hollow central area [2015-01] |
Y10T 24/45555 | . . . . . . . | having separate mounting means inserted into area [2015-01] |
Y10T 24/4556 | . . . . . . . . | Plastic deformation of means or surface required for mounting [2015-01] |
Y10T 24/45565 | . . . . . . . | having separate mounting means encompassing cross section of projection [2015-01] |
Y10T 24/45571 | . . . . . . . | having dome-shaped head and expansion slit along side [2015-01] |
Y10T 24/45576 | . . . . . . . . | and connected surface at tip of head [2015-01] |
Y10T 24/45581 | . . . . . . | having inserted end formed by oppositely biased surface segments [2015-01] |
Y10T 24/45586 | . . . . . . | Constructed from wire [2015-01] |
Y10T 24/45592 | . . . . . | having both resiliently biased and rigid components forming external surface of projection [2015-01] |
Y10T 24/45597 | . . . | Projection member including noninserted spring for engaging and pushing against receiving member [2015-01] |
Y10T 24/45602 | . . . | Receiving member includes either movable connection between interlocking components or variable configuration cavity [2015-01] |
Y10T 24/45607 | . . . . | with additional cavity for engaging different projection [2015-01] |
Y10T 24/45613 | . . . . . | having common means actuating or releasing interlocking components or surfaces [2015-01] |
Y10T 24/45618 | . . . . . . | and interlocking with independently associated or dissociated projection members [2015-01] |
Y10T 24/45623 | . . . . | and operator therefor [2015-01] |
Y10T 24/45628 | . . . . . | for plural, oppositely shifting, similar interlocking components or segments [2015-01] |
Y10T 24/45634 | . . . . . . | Operator includes camming or wedging element [2015-01] |
Y10T 24/45639 | . . . . . | including pivotally connected element on receiving member [2015-01] |
Y10T 24/45644 | . . . . . . | for shifting pivotally connected interlocking component [2015-01] |
Y10T 24/45649 | . . . . . . . | Element and component pivot about same axis [2015-01] |
Y10T 24/45654 | . . . . . . | for shifting slidably connected and guided, nonself-biasing interlocking component [2015-01] |
Y10T 24/4566 | . . . . . | including slidably connected and guided element on receiving member [2015-01] |
Y10T 24/45665 | . . . . . . | for shifting pivotally connected interlocking component [2015-01] |
Y10T 24/4567 | . . . . . . | for shifting slidably connected and guided, nonself-biasing, interlocking component [2015-01] |
Y10T 24/45675 | . . . . | having pivotally connected interlocking component [2015-01] |
Y10T 24/45681 | . . . . . | Blocking removal of formation on projection from complementary formation on side wall of cavity [2015-01] |
Y10T 24/45686 | . . . . . | and position locking-means therefor [2015-01] |
Y10T 24/45691 | . . . . . | and relatively movable handle therefor [2015-01] |
Y10T 24/45696 | . . . . . | Requiring manual force thereon to interlock or disengage [2015-01] |
Y10T 24/45702 | . . . . . . | Plural, oppositely shifting, similar interlocking components [2015-01] |
Y10T 24/45707 | . . . . . . | having aperture therein alignable with parallel access opening [2015-01] |
Y10T 24/45712 | . . . . . . | having interlocking portion thereof housed continuously within cavity [2015-01] |
Y10T 24/45717 | . . . . | having cavity with side walls and axially biased component capping end [2015-01] |
Y10T 24/45723 | . . . . | having slidably connected, nonself-biasing interlocking component [2015-01] |
Y10T 24/45728 | . . . . . | Blocking removal of formation on projection from complementary formation on side wall of cavity [2015-01] |
Y10T 24/45733 | . . . . . | and position locking-means therefor [2015-01] |
Y10T 24/45738 | . . . . . | and relatively movable handle therefor [2015-01] |
Y10T 24/45743 | . . . . . | Requiring manual force thereon to interlock or disengage [2015-01] |
Y10T 24/45749 | . . . . . . | Plural, oppositely shifting, similar interlocking components [2015-01] |
Y10T 24/45754 | . . . . . . | having closed aperture therethrough alignable with parallel access opening [2015-01] |
Y10T 24/45759 | . . . . | having flaccid component defining access opening of cavity [2015-01] |
Y10T 24/45764 | . . . . . | Component formed solely by flaccid cord [2015-01] |
Y10T 24/4577 | . . . . . | with nonflaccid component [2015-01] |
Y10T 24/45775 | . . . . | having resiliently biased interlocking component or segment [2015-01] |
Y10T 24/4578 | . . . . . | Cavity or projection rotates about axis of cavity to dissociate [2015-01] |
Y10T 24/45785 | . . . . . | Requiring manual force applied against bias to interlock or disengage [2015-01] |
Y10T 24/45791 | . . . . . . | and partially blocking separate, nonresilient access opening of cavity [2015-01] |
Y10T 24/45796 | . . . . . | and closed elongated access opening for guiding transverse projection travel after insertion [2015-01] |
Y10T 24/45801 | . . . . . . | Nonresilient walls define opening [2015-01] |
Y10T 24/45806 | . . . . . . | formed from wire [2015-01] |
Y10T 24/45812 | . . . . . | and access opening with gapped perimeter for allowing movement of noninserted projection support therepast [2015-01] |
Y10T 24/45817 | . . . . . . | Cavity constructed solely from wire [2015-01] |
Y10T 24/45822 | . . . . . | Partially blocking separate, nonresilient, access opening of cavity [2015-01] |
Y10T 24/45827 | . . . . . . | and bodily shifted into or out of interlock location by manual force thereon [2015-01] |
Y10T 24/45832 | . . . . . . | formed from wire [2015-01] |
Y10T 24/45838 | . . . . . . . | having curved or bent engaging section conforming to contour of projection [2015-01] |
Y10T 24/45843 | . . . . . . . . | Similar, distinct sections [2015-01] |
Y10T 24/45848 | . . . . . . . | having distinct sections engaging projection at spaced points [2015-01] |
Y10T 24/45853 | . . . . . | including separate, nonprojection-engaging spring for biasing [2015-01] |
Y10T 24/45859 | . . . . . | Biased component or segment entirely formed from wire [2015-01] |
Y10T 24/45864 | . . . . . | having portion of cavity deformed during mounting [2015-01] |
Y10T 24/45869 | . . . . . . | and cooperating with separate mounting component [2015-01] |
Y10T 24/45874 | . . . . . | having axially extending expansion slit along side of cavity [2015-01] |
Y10T 24/4588 | . . . | Means for mounting projection or cavity portion [2015-01] |
Y10T 24/45885 | . . . . | Allows bodily movement facilitating interlock [2015-01] |
Y10T 24/4589 | . . . . . | About pivotal connection [2015-01] |
Y10T 24/45895 | . . . . . | Includes resilient component separate from portion [2015-01] |
Y10T 24/45901 | . . . . | Allows relocation of portion [2015-01] |
Y10T 24/45906 | . . . . | having component of means permanently deformed during mounting operation [2015-01] |
Y10T 24/45911 | . . . . . | and formed from or fixedly attached to projection or cavity portion [2015-01] |
Y10T 24/45916 | . . . . . . | Cooperates with detached component of means [2015-01] |
Y10T 24/45921 | . . . . . . | having shape facilitating impaling of mounting surface [2015-01] |
Y10T 24/45927 | . . . . . | and inserted into or through cavity or projection [2015-01] |
Y10T 24/45932 | . . . . . | and encircling cavity or projection [2015-01] |
Y10T 24/45937 | . . . . | Consisting of thermally fusible substance [2015-01] |
Y10T 24/45942 | . . . . | having threaded formation [2015-01] |
Y10T 24/45948 | . . . . | having specific structure for cooperating with stitching [2015-01] |
Y10T 24/45953 | . . . . | having shape facilitating impaling of mounting surface [2015-01] |
Y10T 24/45958 | . . . | Plural distinct cavities or projections [2015-01] |
Y10T 24/45963 | . . . . | Hook type [2015-01] |
Y10T 24/45969 | . . . | Hook-shaped projection member passing through cavity [2015-01] |
Y10T 24/45974 | . . . . | formed from single piece of sheet metal [2015-01] |
Y10T 24/45979 | . . . . | formed solely from wire [2015-01] |
Y10T 24/45984 | . . . | Cavity having specific shape [2015-01] |
Y10T 24/4599 | . . . . | including closed elongated access opening for guiding transverse projection travel after insertion [2015-01] |
Y10T 24/45995 | . . . . | having access opening with gapped perimeter for allowing movement of noninserted projection support therepast [2015-01] |
Y10T 24/46 | . | Pin or separate essential cooperating device therefor [2015-01] |
Y10T 24/4602 | . . | with separately operable, manually releasable, nonpenetrating means for mounting [e.g., drapery hook] [2015-01] |
Y10T 24/4604 | . . | having distinct guiding, holding, or protecting means for penetrated portion [2015-01] |
Y10T 24/4605 | . . . | Means detachable from or flaccidly connected to pin [e.g., hatpin type] [2015-01] |
Y10T 24/4607 | . . . . | for pin having plural penetrating portions [2015-01] |
Y10T 24/4609 | . . . . | including relatively movable guiding, holding, or protecting components or surfaces [2015-01] |
Y10T 24/4611 | . . . . . | having operator for moving holding component or surface [2015-01] |
Y10T 24/4613 | . . . . . . | Moves pivoting holding component [2015-01] |
Y10T 24/4614 | . . . . . . | Moves slidably guided, nonself-biasing, holding component [2015-01] |
Y10T 24/4616 | . . . . . | having pierceable [e.g., cork] or naturally resilient [e.g., rubber] surfaces [2015-01] |
Y10T 24/4618 | . . . . . | with pivotal connection therebetween [2015-01] |
Y10T 24/462 | . . . . . | with slidable connection between nonself-biasing components [2015-01] |
Y10T 24/4621 | . . . . . | having resiliently biased component or surface [2015-01] |
Y10T 24/4623 | . . . . . . | Coiled about longitudinal axis of held portion [2015-01] |
Y10T 24/4625 | . . . . . . | and aperture therein alignable with another spaced aperture of means [2015-01] |
Y10T 24/4627 | . . . . . . | and nonresilient structure for guiding portion thereto [2015-01] |
Y10T 24/4629 | . . . . | including structure for cooperating with formation [e.g., cavity] formed on penetrating portion [2015-01] |
Y10T 24/463 | . . . | for pin having plural penetrating portions [2015-01] |
Y10T 24/4632 | . . . . | Each independently movable towards and into cooperation with means [2015-01] |
Y10T 24/4634 | . . . | including relatively movable guiding, holding, or protecting components or surfaces [2015-01] |
Y10T 24/4636 | . . . . | with connection allowing component to revolve about axis of held penetrating portion [2015-01] |
Y10T 24/4638 | . . . . | with pivotal connection therebetween [2015-01] |
Y10T 24/4639 | . . . . . | having position locking means therefor [2015-01] |
Y10T 24/4641 | . . . . . | Spring or resiliently biased [2015-01] |
Y10T 24/4643 | . . . . | with slidable connection between nonself-biasing components [2015-01] |
Y10T 24/4645 | . . . . . | Component slides parallel to axis of held penetrating portion [2015-01] |
Y10T 24/4646 | . . . . | Means engages formation formed on penetrating portion [2015-01] |
Y10T 24/4648 | . . . . | having nonresilient and resilient components [2015-01] |
Y10T 24/465 | . . . . | Means formed from single resilient wire [2015-01] |
Y10T 24/4652 | . . . . | Means formed from resilient sheet metal [2015-01] |
Y10T 24/4654 | . . . | with independent, spaced, intermediate connections, or formations [e.g., coils], about which portion or means move [2015-01] |
Y10T 24/4655 | . . . . | Includes slidable connection [2015-01] |
Y10T 24/4657 | . . . | with pivotal connection between penetrating portion and means [2015-01] |
Y10T 24/4659 | . . . . | Connection also permits sliding movement [2015-01] |
Y10T 24/4661 | . . . . | Resiliently biased about connection [2015-01] |
Y10T 24/4663 | . . . | with slidable connection intermediate penetrating portion and means [2015-01] |
Y10T 24/4664 | . . . | having resilient bridging structure between portion and means [2015-01] |
Y10T 24/4666 | . . . . | Means includes structure for cooperating with formation [e.g., cavity] formed on portion [2015-01] |
Y10T 24/4668 | . . . . | and penetrating portion formed from wire [2015-01] |
Y10T 24/467 | . . . . . | Bridging structure includes elongated nonwire element [2015-01] |
Y10T 24/4671 | . . . . . | Wire also forms coiled bridging structure about which portion moves [2015-01] |
Y10T 24/4673 | . . . . . . | including distinct device for cooperating with coil [2015-01] |
Y10T 24/4675 | . . . . . . | having means also formed from same wire [2015-01] |
Y10T 24/4677 | . . | with cavity for guiding structure-to-be-secured towards penetrating portion [e.g., stocking support] [2015-01] |
Y10T 24/4679 | . . | having penetrating portion retractable or of changeable length [2015-01] |
Y10T 24/468 | . . | having interconnected distinct penetrating portions [2015-01] |
Y10T 24/4682 | . . . | Connection allows movement therebetween [2015-01] |
Y10T 24/4684 | . . . . | Slidable connection [2015-01] |
Y10T 24/4686 | . . . . | Resilient connection [2015-01] |
Y10T 24/4688 | . . . | formed from common wire [2015-01] |
Y10T 24/4689 | . . . . | and pointing in same direction [2015-01] |
Y10T 24/4691 | . . | Penetrating portion includes relatively movable structure for resisting extraction [2015-01] |
Y10T 24/4693 | . . | having specific wire penetrating portion [2015-01] |
Y10T 24/4695 | . . . | Wire curved or bent [2015-01] |
Y10T 24/4696 | . . | having distinct head structure [2015-01] |
Y10T 24/4698 | . . . | Movably connected to penetrating portion [2015-01] |
Y10T 24/47 | . | Strap-end-attaching devices [2015-01] |
Y10T 24/4709 | . . | Bendable sheet material [2015-01] |
Y10T 24/4718 | . . | Watch pintle connected [2015-01] |
Y10T 24/4727 | . . | Webbing to tube [lawn chair] [2015-01] |
Y10T 24/4736 | . . | Buckle connected [2015-01] |
Y10T 24/4745 | . . | End clasp [2015-01] |
Y10T 24/4755 | . . | Hook [2015-01] |
| Y10T 24/4764 | . . | Ring-loop [2021-05] WARNING
|
Y10T 24/4773 | . . | Cargo tiedown [2015-01] |
Y10T 24/4782 | . . | Watch strap [2015-01] |
Y10T 24/4791 | . . | Enlarged end epoxy [2015-01] |
Y10T 24/48 | . | Pivoted edge stays [2015-01] |
Y10T 24/49 | . | Fastener destructively secured by reshaping distortion force [e.g., ductile fastener] [2015-01] |
Y10T 24/492 | . . | Distorted structure having shape facilitating impaling [2015-01] |
Y10T 24/493 | . . . | and distinct fastener structure cooperating with impaled structure [2015-01] |
Y10T 24/495 | . . . . | Detached cooperating structure [2015-01] |
Y10T 24/497 | . . . | including plural impaling elements [2015-01] |
Y10T 24/498 | . . . . | Elements form single aperture [e.g., split shank type] [2015-01] |
Y10T 24/50 | . | Readily interlocking, two-part fastener requiring either destructive or tool disengagement [2015-01] |
Y10T 24/505 | . . | including additional fastener structure linking parts [2015-01] |
Y10T 24/51 | . | Hanger on portable article support for manual attachment thereof to overhead support [e.g., drapery hook] [2015-01] |
Former US Class 29 Series [2015-01] |
Y10T 29/00 | Metal working [2015-01] |
Y10T 29/10 | . | Battery-grid making [2015-01] |
Y10T 29/11 | . | Bias [i.e. , helically] cutting of tubular stock [2015-01] |
Y10T 29/1106 | . . | including orbital cutter [2015-01] |
Y10T 29/1113 | . . . | within stock support [2015-01] |
Y10T 29/1119 | . . . | with orbiting strip accumulator [2015-01] |
Y10T 29/1125 | . . | including means to inflate stock [2015-01] |
Y10T 29/1131 | . . | with means to feed stock along support or mandrel [2015-01] |
Y10T 29/1138 | . . . | Single means produces compound motion [2015-01] |
Y10T 29/1144 | . . . . | Endless belt drive means [2015-01] |
Y10T 29/115 | . . . | Axially [2015-01] |
Y10T 29/1156 | . . . | Rotatably [2015-01] |
Y10T 29/1163 | . . | with means to rotate and store stock supply [2015-01] |
Y10T 29/1169 | . . . | Axis of rotation parallel to support or mandrel [2015-01] |
Y10T 29/1175 | . . | with means for arcuate shift of mandrel [2015-01] |
Y10T 29/1181 | . . | including means to handle produced strip or web [2015-01] |
Y10T 29/1188 | . . . | with common adjustment for cutter [2015-01] |
Y10T 29/1194 | . . | Method [2015-01] |
Y10T 29/12 | . | Buckle making [2015-01] |
Y10T 29/13 | . | Button-fastener making [2015-01] |
Y10T 29/14 | . | Shredding metal or metal wool article making [2015-01] |
Y10T 29/142 | . . | Metal wool making [2015-01] |
Y10T 29/143 | . . . | Shaving or longitudinal cutting [2015-01] |
Y10T 29/145 | . . . . | Soap-pad making [2015-01] |
Y10T 29/147 | . . | Metal wool bundling [2015-01] |
Y10T 29/148 | . . . | Soap-pad making [2015-01] |
Y10T 29/15 | . | Cord heddle making [2015-01] |
Y10T 29/16 | . | Cotter-pin making [2015-01] |
Y10T 29/17 | . | Crankshaft making apparatus [2015-01] |
Y10T 29/18 | . | Expanded metal making [2015-01] |
Y10T 29/185 | . . | by use of reciprocating perforator [2015-01] |
Y10T 29/19 | . | Eyebolt or hook making [2015-01] |
Y10T 29/20 | . | Fence barb making [2015-01] |
Y10T 29/203 | . . | by use of reciprocating cutter or die [2015-01] |
Y10T 29/207 | . . | by use of rotary cutter or die [2015-01] |
Y10T 29/21 | . | Finger-ring forming or sizing [2015-01] |
Y10T 29/22 | . | Fishhook making [2015-01] |
Y10T 29/23 | . | Gem and jewel setting [2015-01] |
Y10T 29/24 | . | Hinge making or assembling [2015-01] |
Y10T 29/25 | . | Lacing-stud making [2015-01] |
Y10T 29/26 | . | Paper-fastener making [2015-01] |
Y10T 29/27 | . | Plow or cultivator iron making [2015-01] |
Y10T 29/28 | . | Puddlers balls making [2015-01] |
Y10T 29/29 | . | Railway-chair making [2015-01] |
Y10T 29/30 | . | Foil or other thin sheet-metal making or treating [2015-01] |
Y10T 29/301 | . . | Method [2015-01] |
Y10T 29/302 | . . . | Clad or other composite foil or thin metal making [2015-01] |
Y10T 29/303 | . . . | with assembling or disassembling of a pack [2015-01] |
Y10T 29/304 | . . . . | Using transitory solid cover material [2015-01] |
Y10T 29/305 | . . . . | including bond prevention treatment [2015-01] |
Y10T 29/306 | . . . . | Disassembling of a pack [2015-01] |
Y10T 29/307 | . . . | by shaving or longitudinal cutting [2015-01] |
Y10T 29/308 | . . . | Using transitory material [2015-01] |
Y10T 29/309 | . . | Means for opening or separating a pack [2015-01] |
Y10T 29/31 | . | Spectacle-frame making [2015-01] |
Y10T 29/32 | . | Spiral cutting of flat stock [2015-01] |
Y10T 29/33 | . | Stereotype-plate finishing [2015-01] |
Y10T 29/34 | . | Means for forming clench-tongue [eg, for tieband] [2015-01] |
Y10T 29/35 | . | Tire upsetting, with cutting, punching, etc. [2015-01] |
Y10T 29/36 | . | toothed-cylinder making apparatus [e.g. , texture working cylinder] [2015-01] |
Y10T 29/37 | . | Impeller making apparatus [2015-01] |
Y10T 29/38 | . | Type finishing and grooving [2015-01] |
Y10T 29/39 | . | Venetian blind assembling [2015-01] |
Y10T 29/40 | . | Umbrella-frame making [2015-01] |
Y10T 29/42 | . | Piezoelectric device making [2015-01] |
Y10T 29/43 | . | Electric condenser making [2015-01] |
Y10T 29/435 | . . | Solid dielectric type [2015-01] |
Y10T 29/44 | . | Filing [2015-01] |
Y10T 29/442 | . . | of key article [2015-01] |
Y10T 29/444 | . . | Continuous band type [2015-01] |
Y10T 29/446 | . . | Reciprocating type [2015-01] |
Y10T 29/448 | . . | File-blank stripper [2015-01] |
Y10T 29/45 | . | Scale remover or preventor [2015-01] |
Y10T 29/4506 | . . | for hollow workpiece [2015-01] |
Y10T 29/4511 | . . . | Interior surface [2015-01] |
Y10T 29/4517 | . . | Rolling deformation or deflection [2015-01] |
Y10T 29/4522 | . . . | for wire or rod [2015-01] |
Y10T 29/4528 | . . | with rotary head [2015-01] |
Y10T 29/4533 | . . | Fluid impingement [2015-01] |
Y10T 29/4539 | . . . | with heater [2015-01] |
Y10T 29/4544 | . . . | Liquid jet [2015-01] |
Y10T 29/455 | . . . | Airblast [2015-01] |
Y10T 29/4556 | . . | Chainer [2015-01] |
Y10T 29/4561 | . . | Scraper or scalper [2015-01] |
Y10T 29/4567 | . . | Brush type [2015-01] |
Y10T 29/4572 | . . | Mechanically powered operator [2015-01] |
Y10T 29/4578 | . . . | Tack or needle type [2015-01] |
Y10T 29/4583 | . . . | Hammer [2015-01] |
Y10T 29/4589 | . . . | Blade or chisel [2015-01] |
Y10T 29/4594 | . . | Hand tool [2015-01] |
Y10T 29/46 | . | Burning in, wearing in, or oil burnishing [2015-01] |
Y10T 29/47 | . | Burnishing [2015-01] |
Y10T 29/471 | . . | of water laid fibrous article [e.g., paper] [2015-01] |
Y10T 29/473 | . . . | Heated burnishing member [2015-01] |
Y10T 29/474 | . . . . | Burnishing tool reciprocates across work surface [2015-01] |
Y10T 29/476 | . . | Continuous feed [2015-01] |
Y10T 29/477 | . . | of gear article [2015-01] |
Y10T 29/479 | . . | by shot peening or blasting [2015-01] |
Y10T 29/48 | . | Upholstered article making [2015-01] |
Y10T 29/481 | . . | Method [2015-01] |
Y10T 29/482 | . . | Tufting [2015-01] |
Y10T 29/483 | . . . | with means to clench fastener [2015-01] |
Y10T 29/484 | . . . | with means to insert guide pin or fastener [2015-01] |
Y10T 29/486 | . . | Cover stretching [2015-01] |
Y10T 29/487 | . . | Edge-roll forming [2015-01] |
Y10T 29/488 | . . | form or holder [2015-01] |
Y10T 29/489 | . . . | with follower [2015-01] |
Y10T 29/49 | . | Method of mechanical manufacture [2015-01] |
Y10T 29/49002 | . . | Electrical device making [2015-01] |
Y10T 29/49004 | . . . | including measuring or testing of device or component part [2015-01] |
Y10T 29/49005 | . . . | Acoustic transducer [2015-01] |
Y10T 29/49007 | . . . | Indicating transducer [2015-01] |
Y10T 29/49009 | . . . | Dynamoelectric machine [2015-01] |
Y10T 29/49011 | . . . . | Commutator or slip ring assembly [2015-01] |
Y10T 29/49012 | . . . . | Rotor [2015-01] |
Y10T 29/49014 | . . . | Superconductor [2015-01] |
Y10T 29/49016 | . . . | Antenna or wave energy "plumbing" making [2015-01] |
Y10T 29/49018 | . . . . | with other electrical component [2015-01] |
Y10T 29/4902 | . . . | Electromagnet, transformer or inductor [2015-01] |
Y10T 29/49021 | . . . . | Magnetic recording reproducing transducer [e.g., tape head, core, etc.] [2015-01] |
Y10T 29/49023 | . . . . . | including dissassembly step [2015-01] |
Y10T 29/49025 | . . . . . | Making disc drive [2015-01] |
Y10T 29/49027 | . . . . . | Mounting preformed head/core onto other structure [2015-01] |
Y10T 29/49028 | . . . . . . | Mounting multitrack head [2015-01] |
Y10T 29/4903 | . . . . . . | with bonding [2015-01] |
Y10T 29/49032 | . . . . . | Fabricating head structure or component thereof [2015-01] |
Y10T 29/49034 | . . . . . . | Treating to affect magnetic properties [2015-01] |
Y10T 29/49036 | . . . . . . | including measuring or testing [2015-01] |
Y10T 29/49037 | . . . . . . . | Using reference point/surface to facilitate measuring [2015-01] |
Y10T 29/49039 | . . . . . . . | with dual gap materials [2015-01] |
Y10T 29/49041 | . . . . . . . | with significant slider/housing shaping or treating [2015-01] |
Y10T 29/49043 | . . . . . . . | Depositing magnetic layer or coating [2015-01] |
Y10T 29/49044 | . . . . . . . . | Plural magnetic deposition layers [2015-01] |
Y10T 29/49046 | . . . . . . . . | with etching or machining of magnetic material [2015-01] |
Y10T 29/49048 | . . . . . . | Machining magnetic material [e.g., grinding, etching, polishing] [2015-01] |
Y10T 29/4905 | . . . . . . . | Employing workholding means [2015-01] |
Y10T 29/49052 | . . . . . . . | by etching [2015-01] |
Y10T 29/49053 | . . . . . . | Multitrack heads having integral holding means [2015-01] |
Y10T 29/49055 | . . . . . . | with bond/laminating preformed parts, at least two magnetic [2015-01] |
Y10T 29/49057 | . . . . . . . | Using glass bonding material [2015-01] |
Y10T 29/49059 | . . . . . . . | with work positioning means [2015-01] |
Y10T 29/4906 | . . . . . . | Providing winding [2015-01] |
Y10T 29/49062 | . . . . . . . | Multilayered winding [2015-01] |
Y10T 29/49064 | . . . . . . . | by coating [2015-01] |
Y10T 29/49066 | . . . . . . . | Preformed winding [2015-01] |
Y10T 29/49067 | . . . . . . | Specified diverse magnetic materials [2015-01] |
Y10T 29/49069 | . . . . | Data storage inductor or core [2015-01] |
Y10T 29/49071 | . . . . | by winding or coiling [2015-01] |
Y10T 29/49073 | . . . . | by assembling coil and core [2015-01] |
Y10T 29/49075 | . . . . | including permanent magnet or core [2015-01] |
Y10T 29/49076 | . . . . . | From comminuted material [2015-01] |
Y10T 29/49078 | . . . . . | Laminated [2015-01] |
Y10T 29/4908 | . . . . | Acoustic transducer [2015-01] |
Y10T 29/49082 | . . . | Resistor making [2015-01] |
Y10T 29/49083 | . . . . | Heater type [2015-01] |
Y10T 29/49085 | . . . . | Thermally variable [2015-01] |
Y10T 29/49087 | . . . . | with envelope or housing [2015-01] |
Y10T 29/49089 | . . . . . | Filling with powdered insulation [2015-01] |
Y10T 29/49091 | . . . . . . | with direct compression of powdered insulation [2015-01] |
Y10T 29/49092 | . . . . . | Powdering the insulation [2015-01] |
Y10T 29/49094 | . . . . . . | by oxidation [2015-01] |
Y10T 29/49096 | . . . . . | with winding [2015-01] |
Y10T 29/49098 | . . . . . | Applying terminal [2015-01] |
Y10T 29/49099 | . . . . | Coating resistive material on a base [2015-01] |
Y10T 29/49101 | . . . . | Applying terminal [2015-01] |
Y10T 29/49103 | . . . . | Strain gauge making [2015-01] |
Y10T 29/49105 | . . . | Switch making [2015-01] |
Y10T 29/49107 | . . . | Fuse making [2015-01] |
Y10T 29/49108 | . . . | Electric battery cell making [2015-01] |
Y10T 29/4911 | . . . . | including sealing [2015-01] |
Y10T 29/49112 | . . . . | including laminating of indefinite length material [2015-01] |
Y10T 29/49114 | . . . . | including adhesively bonding [2015-01] |
Y10T 29/49115 | . . . . | including coating or impregnating [2015-01] |
Y10T 29/49117 | . . . | Conductor or circuit manufacturing [2015-01] |
Y10T 29/49119 | . . . . | Brush [2015-01] |
Y10T 29/49121 | . . . . | Beam lead frame or beam lead device [2015-01] |
Y10T 29/49123 | . . . . | Co-axial cable [2015-01] |
Y10T 29/49124 | . . . . | On flat or curved insulated base, e.g., printed circuit, etc. [2015-01] |
Y10T 29/49126 | . . . . . | Assembling bases [2015-01] |
Y10T 29/49128 | . . . . . | Assembling formed circuit to base [2015-01] |
Y10T 29/4913 | . . . . . | Assembling to base an electrical component, e.g., capacitor, etc. [2015-01] |
Y10T 29/49131 | . . . . . . | by utilizing optical sighting device [2015-01] |
Y10T 29/49133 | . . . . . . | with component orienting [2015-01] |
Y10T 29/49135 | . . . . . . . | and shaping, e.g., cutting or bending, etc. [2015-01] |
Y10T 29/49137 | . . . . . . . | Different components [2015-01] |
Y10T 29/49139 | . . . . . . | by inserting component lead or terminal into base aperture [2015-01] |
Y10T 29/4914 | . . . . . . . | with deforming of lead or terminal [2015-01] |
Y10T 29/49142 | . . . . . . . . | including metal fusion [2015-01] |
Y10T 29/49144 | . . . . . . | by metal fusion [2015-01] |
Y10T 29/49146 | . . . . . . | with encapsulating, e.g., potting, etc. [2015-01] |
Y10T 29/49147 | . . . . . | Assembling terminal to base [2015-01] |
Y10T 29/49149 | . . . . . . | by metal fusion bonding [2015-01] |
Y10T 29/49151 | . . . . . . | by deforming or shaping [2015-01] |
Y10T 29/49153 | . . . . . . . | with shaping or forcing terminal into base aperture [2015-01] |
Y10T 29/49155 | . . . . . | Manufacturing circuit on or in base [2015-01] |
Y10T 29/49156 | . . . . . . | with selective destruction of conductive paths [2015-01] |
Y10T 29/49158 | . . . . . . | with molding of insulated base [2015-01] |
Y10T 29/4916 | . . . . . . . | Simultaneous circuit manufacturing [2015-01] |
Y10T 29/49162 | . . . . . . | by using wire as conductive path [2015-01] |
Y10T 29/49163 | . . . . . . | with sintering of base [2015-01] |
Y10T 29/49165 | . . . . . . | by forming conductive walled aperture in base [2015-01] |
Y10T 29/49167 | . . . . . . . | with deforming of conductive path [2015-01] |
Y10T 29/49169 | . . . . | Assembling electrical component directly to terminal or elongated conductor [2015-01] |
Y10T 29/49171 | . . . . . | with encapsulating [2015-01] |
Y10T 29/49172 | . . . . . . | by molding of insulating material [2015-01] |
Y10T 29/49174 | . . . . | Assembling terminal to elongated conductor [2015-01] |
Y10T 29/49176 | . . . . . | with molding of electrically insulating material [2015-01] |
Y10T 29/49178 | . . . . . . | by shrinking of cover [2015-01] |
Y10T 29/49179 | . . . . . | by metal fusion bonding [2015-01] |
Y10T 29/49181 | . . . . . | by deforming [2015-01] |
Y10T 29/49183 | . . . . . . | of ferrule about conductor and terminal [2015-01] |
Y10T 29/49185 | . . . . . . | of terminal [2015-01] |
Y10T 29/49187 | . . . . . . . | with forming eyelet from elongated conductor [2015-01] |
Y10T 29/49188 | . . . . . . . | with penetrating portion [2015-01] |
Y10T 29/4919 | . . . . . . . . | Through insulation [2015-01] |
Y10T 29/49192 | . . . . . . . | with insulation removal [2015-01] |
Y10T 29/49194 | . . . . | Assembling elongated conductors, e.g., splicing, etc. [2015-01] |
Y10T 29/49195 | . . . . . | with end-to-end orienting [2015-01] |
Y10T 29/49197 | . . . . . . | including fluid evacuating or pressurizing [2015-01] |
Y10T 29/49199 | . . . . . . | including deforming of joining bridge [2015-01] |
Y10T 29/49201 | . . . . . | with overlapping orienting [2015-01] |
Y10T 29/49202 | . . . . . . | including oppositely facing end orienting [2015-01] |
Y10T 29/49204 | . . . . | Contact or terminal manufacturing [2015-01] |
Y10T 29/49206 | . . . . . | by powder metallurgy [2015-01] |
Y10T 29/49208 | . . . . . | by assembling plural parts [2015-01] |
Y10T 29/4921 | . . . . . . | with bonding [2015-01] |
Y10T 29/49211 | . . . . . . . | of fused material [2015-01] |
Y10T 29/49213 | . . . . . . . . | Metal [2015-01] |
Y10T 29/49215 | . . . . . . . . . | by impregnating a porous mass [2015-01] |
Y10T 29/49217 | . . . . . . | by elastic joining [2015-01] |
Y10T 29/49218 | . . . . . . | with deforming [2015-01] |
Y10T 29/4922 | . . . . . . | with molding of insulation [2015-01] |
Y10T 29/49222 | . . . . . . | forming array of contacts or terminals [2015-01] |
Y10T 29/49224 | . . . . . | with coating [2015-01] |
Y10T 29/49226 | . . . | Electret making [2015-01] |
Y10T 29/49227 | . . . | Insulator making [2015-01] |
Y10T 29/49229 | . . | Prime mover or fluid pump making [2015-01] |
Y10T 29/49231 | . . . | I.C. [internal combustion] engine making [2015-01] |
Y10T 29/49233 | . . . . | Repairing, converting, servicing or salvaging [2015-01] |
Y10T 29/49234 | . . . . | Rotary or radial engine making [2015-01] |
Y10T 29/49236 | . . . | Fluid pump or compressor making [2015-01] |
Y10T 29/49238 | . . . . | Repairing, converting, servicing or salvaging [2015-01] |
Y10T 29/4924 | . . . . | Scroll or peristaltic type [2015-01] |
Y10T 29/49242 | . . . . | Screw or gear type, e.g., Moineau type [2015-01] |
Y10T 29/49243 | . . . . | Centrifugal type [2015-01] |
Y10T 29/49245 | . . . . | Vane type or other rotary, e.g., fan [2015-01] |
Y10T 29/49247 | . . . | Valve lifter making [2015-01] |
Y10T 29/49249 | . . . | Piston making [2015-01] |
Y10T 29/4925 | . . . . | Repairing, converting, servicing or salvaging [2015-01] |
Y10T 29/49252 | . . . . | Multi-element piston making [2015-01] |
Y10T 29/49254 | . . . . . | Utilizing a high energy beam, e.g., laser, electron beam [2015-01] |
Y10T 29/49256 | . . . . | with assembly or composite article making [2015-01] |
Y10T 29/49258 | . . . . . | with thermal barrier or heat flow provision [2015-01] |
Y10T 29/49259 | . . . . . | with fiber reinforced structure [2015-01] |
Y10T 29/49261 | . . . . . | by composite casting or molding [2015-01] |
Y10T 29/49263 | . . . . . | by coating or cladding [2015-01] |
Y10T 29/49265 | . . . . | Ring groove forming or finishing [2015-01] |
Y10T 29/49266 | . . . . | Gudgeon pin, wrist pin, piston pin, or boss therefor [2015-01] |
Y10T 29/49268 | . . . . | with other attaching provision for connecting rod [2015-01] |
Y10T 29/4927 | . . . | Cylinder, cylinder head or engine valve sleeve making [2015-01] |
Y10T 29/49272 | . . . . | with liner, coating, or sleeve [2015-01] |
Y10T 29/49274 | . . . | Piston ring or piston packing making [2015-01] |
Y10T 29/49275 | . . . . | including forging or hammering [2015-01] |
Y10T 29/49277 | . . . . | including casting or molding [2015-01] |
Y10T 29/49279 | . . . . | including rolling or die forming, e.g., drawing, punching [2015-01] |
Y10T 29/49281 | . . . . | including coating or plating [2015-01] |
Y10T 29/49282 | . . . . | including grinding or honing [2015-01] |
Y10T 29/49284 | . . . . | including machining or angular cutting [2015-01] |
Y10T 29/49286 | . . . | Crankshaft making [2015-01] |
Y10T 29/49288 | . . . | Connecting rod making [2015-01] |
Y10T 29/4929 | . . . . | including metallurgical bonding [2015-01] |
Y10T 29/49291 | . . . . | including metal forging or die shaping [2015-01] |
Y10T 29/49293 | . . . | Camshaft making [2015-01] |
Y10T 29/49295 | . . . | Push rod or rocker arm making [2015-01] |
Y10T 29/49297 | . . . | Seal or packing making [2015-01] |
Y10T 29/49298 | . . . | Poppet or I.C. engine valve or valve seat making [2015-01] |
Y10T 29/493 | . . . . | Valve guide making [2015-01] |
Y10T 29/49302 | . . . . | Repairing, converting, servicing or salvaging [2015-01] |
Y10T 29/49304 | . . . . | Valve tappet making [2015-01] |
Y10T 29/49306 | . . . . | Valve seat making [2015-01] |
Y10T 29/49307 | . . . . | Composite or hollow valve stem or head making [2015-01] |
Y10T 29/49309 | . . . . . | including forging [2015-01] |
Y10T 29/49311 | . . . . . | including extruding [2015-01] |
Y10T 29/49313 | . . . . . | including casting [2015-01] |
Y10T 29/49314 | . . . . | with assembly or composite article making [2015-01] |
Y10T 29/49316 | . . | Impeller making [2015-01] |
Y10T 29/49318 | . . . | Repairing or disassembling [2015-01] |
Y10T 29/4932 | . . . | Turbomachine making [2015-01] |
Y10T 29/49321 | . . . . | Assembling individual fluid flow interacting members, e.g., blades, vanes, buckets, on rotary support member [2015-01] |
Y10T 29/49323 | . . . . | Assembling fluid flow directing devices, e.g., stators, diaphragms, nozzles [2015-01] |
Y10T 29/49325 | . . . . | Shaping integrally bladed rotor [2015-01] |
Y10T 29/49327 | . . . | Axial blower or fan [2015-01] |
Y10T 29/49329 | . . . | Centrifugal blower or fan [2015-01] |
Y10T 29/4933 | . . . | Fluid coupling device [2015-01] |
Y10T 29/49332 | . . . | Propeller making [2015-01] |
Y10T 29/49334 | . . . . | Utilizing hollow tube blank [2015-01] |
Y10T 29/49336 | . . . | Blade making [2015-01] |
Y10T 29/49337 | . . . . | Composite blade [2015-01] |
Y10T 29/49339 | . . . . | Hollow blade [2015-01] |
Y10T 29/49341 | . . . . . | with cooling passage [2015-01] |
Y10T 29/49343 | . . . . . . | Passage contains tubular insert [2015-01] |
Y10T 29/49345 | . . | Catalytic device making [2015-01] |
Y10T 29/49346 | . . | Rocket or jet device making [2015-01] |
Y10T 29/49348 | . . | Burner, torch or metallurgical lance making [2015-01] |
Y10T 29/4935 | . . | Heat exchanger or boiler making [2015-01] |
Y10T 29/49352 | . . . | Repairing, converting, servicing or salvaging [2015-01] |
Y10T 29/49353 | . . . | Heat pipe device making [2015-01] |
Y10T 29/49355 | . . . | Solar energy device making [2015-01] |
Y10T 29/49357 | . . . | Regenerator or recuperator making [2015-01] |
Y10T 29/49359 | . . . | Cooling apparatus making, e.g., air conditioner, refrigerator [2015-01] |
Y10T 29/49361 | . . . | Tube inside tube [2015-01] |
Y10T 29/49362 | . . . | Tube wound about tube [2015-01] |
Y10T 29/49364 | . . . | Tube joined to flat sheet longitudinally, i.e., tube sheet [2015-01] |
Y10T 29/49366 | . . . | Sheet joined to sheet [2015-01] |
Y10T 29/49368 | . . . . | with inserted tubes [2015-01] |
Y10T 29/49369 | . . . . | Utilizing bond inhibiting material [2015-01] |
Y10T 29/49371 | . . . . . | with subsequent fluid expansion [2015-01] |
Y10T 29/49373 | . . . | Tube joint and tube plate structure [2015-01] |
Y10T 29/49375 | . . . . | including conduit expansion or inflation [2015-01] |
Y10T 29/49377 | . . . | Tube with heat transfer means [2015-01] |
Y10T 29/49378 | . . . . | Finned tube [2015-01] |
Y10T 29/4938 | . . . . . | Common fin traverses plurality of tubes [2015-01] |
Y10T 29/49382 | . . . . . | Helically finned [2015-01] |
Y10T 29/49384 | . . . . . | Internally finned [2015-01] |
Y10T 29/49385 | . . . . . | Made from unitary workpiece, i.e., no assembly [2015-01] |
Y10T 29/49387 | . . . | Boiler making [2015-01] |
Y10T 29/49389 | . . . | Header or manifold making [2015-01] |
Y10T 29/49391 | . . . | Tube making or reforming [2015-01] |
Y10T 29/49393 | . . . | with metallurgical bonding [2015-01] |
Y10T 29/49394 | . . | Accumulator making [2015-01] |
Y10T 29/49396 | . . | Condenser, evaporator or vaporizer making [2015-01] |
Y10T 29/49398 | . . | Muffler, manifold or exhaust pipe making [2015-01] |
Y10T 29/494 | . . | Fluidic or fluid actuated device making [2015-01] |
Y10T 29/49401 | . . | Fluid pattern dispersing device making, e.g., ink jet [2015-01] |
Y10T 29/49403 | . . | Tapping device making [2015-01] |
Y10T 29/49405 | . . | Valve or choke making [2015-01] |
Y10T 29/49407 | . . . | Repairing, converting, servicing or salvaging [2015-01] |
Y10T 29/49409 | . . . | Valve seat forming [2015-01] |
Y10T 29/4941 | . . . | Valve stem or tire valve making [2015-01] |
Y10T 29/49412 | . . . | with assembly, disassembly or composite article making [2015-01] |
Y10T 29/49414 | . . . . | Joining plural semi-circular components [2015-01] |
Y10T 29/49416 | . . . . | with material shaping or cutting [2015-01] |
Y10T 29/49417 | . . . . . | including molding or casting [2015-01] |
Y10T 29/49419 | . . . . . | including machining or drilling [2015-01] |
Y10T 29/49421 | . . . . . | including metallurgical bonding [2015-01] |
Y10T 29/49423 | . . . . . | including metal deforming [2015-01] |
Y10T 29/49425 | . . . . | including metallurgical bonding [2015-01] |
Y10T 29/49426 | . . . | including metal shaping and diverse operation [2015-01] |
Y10T 29/49428 | . . | Gas and water specific plumbing component making [2015-01] |
Y10T 29/4943 | . . . | Plumbing fixture making [2015-01] |
Y10T 29/49432 | . . . | Nozzle making [2015-01] |
Y10T 29/49433 | . . . . | Sprayer [2015-01] |
Y10T 29/49435 | . . . | Flexible conduit or fitting therefor [2015-01] |
Y10T 29/49437 | . . . | Flue connector device making [2015-01] |
Y10T 29/49439 | . . . | Trap making [2015-01] |
Y10T 29/4944 | . . . | Return connector device making [2015-01] |
Y10T 29/49442 | . . . | T-shaped fitting making [2015-01] |
Y10T 29/49444 | . . . | Elbow or L-shaped fitting making [2015-01] |
Y10T 29/49446 | . . . | Ferrule making or reforming [2015-01] |
Y10T 29/49448 | . . | Agricultural device making [2015-01] |
Y10T 29/49449 | . . . | Traction apparatus, e.g., for tractor [2015-01] |
Y10T 29/49451 | . . . | Harvester guard [2015-01] |
Y10T 29/49453 | . . | Pulley making [2015-01] |
Y10T 29/49455 | . . . | Assembly [2015-01] |
Y10T 29/49456 | . . . . | with shaping [2015-01] |
Y10T 29/49458 | . . . | Disc splitting to form pulley rim groove [2015-01] |
Y10T 29/4946 | . . . | Groove forming in sheet metal pulley rim [2015-01] |
Y10T 29/49462 | . . | Gear making [2015-01] |
Y10T 29/49464 | . . . | Assembling of gear into force transmitting device [2015-01] |
Y10T 29/49465 | . . . | Gear mounting [2015-01] |
Y10T 29/49467 | . . . | Gear shaping [2015-01] |
Y10T 29/49469 | . . . . | Worm gear [2015-01] |
Y10T 29/49471 | . . . . | Roll forming [2015-01] |
Y10T 29/49472 | . . . . | Punching or stamping [2015-01] |
Y10T 29/49474 | . . . . | Die-press shaping [2015-01] |
Y10T 29/49476 | . . . . | Gear tooth cutting [2015-01] |
Y10T 29/49478 | . . . . | Gear blank making [2015-01] |
Y10T 29/4948 | . . . . | with specific gear material [2015-01] |
Y10T 29/49481 | . . | Wheel making [2015-01] |
Y10T 29/49483 | . . . | Railway or trolley wheel making [2015-01] |
Y10T 29/49485 | . . . . | Multiple part or composite [2015-01] |
Y10T 29/49487 | . . . . . | with axle or hub [2015-01] |
Y10T 29/49488 | . . . | Steering wheel [2015-01] |
Y10T 29/4949 | . . . | Material winding, e.g., reel, spool [2015-01] |
Y10T 29/49492 | . . . | Land wheel [2015-01] |
Y10T 29/49494 | . . . . | Assembling tire to wheel body [2015-01] |
Y10T 29/49496 | . . . . | Disc type wheel [2015-01] |
Y10T 29/49497 | . . . . . | Assembling wheel disc to rim and hub [2015-01] |
Y10T 29/49499 | . . . . . | Assembling wheel disc to rim [2015-01] |
Y10T 29/49501 | . . . . . . | with disc shaping [2015-01] |
Y10T 29/49503 | . . . . . | Integral rim and disc making [2015-01] |
Y10T 29/49504 | . . . . . | Disc shaping [2015-01] |
Y10T 29/49506 | . . . . | Tensioned spoke type wheel making [2015-01] |
Y10T 29/49508 | . . . . . | Tensioning all spokes simultaneously [2015-01] |
Y10T 29/4951 | . . . . . | Tensioning spokes in series [2015-01] |
Y10T 29/49512 | . . . . . | Tensioning spokes individually [2015-01] |
Y10T 29/49513 | . . . . | Compression, e.g., nontension, spoke type wheel making [2015-01] |
Y10T 29/49515 | . . . . . | Joining spokes to rim and hub [2015-01] |
Y10T 29/49517 | . . . . . | Joining spokes to rim [2015-01] |
Y10T 29/49519 | . . . . . | Joining spokes to hub [2015-01] |
Y10T 29/4952 | . . . . . | Making plural spokes from a single blank [2015-01] |
Y10T 29/49522 | . . . . . | Individual spoke making [2015-01] |
Y10T 29/49524 | . . . . | Rim making [2015-01] |
Y10T 29/49526 | . . . . . | with assembling [2015-01] |
Y10T 29/49528 | . . . . . . | Demountable rim making [2015-01] |
Y10T 29/49529 | . . . . . | Die-press shaping [2015-01] |
Y10T 29/49531 | . . . . . | Roller forming [2015-01] |
Y10T 29/49533 | . . . . | Hub making [2015-01] |
Y10T 29/49535 | . . . . . | with assembling [2015-01] |
Y10T 29/49536 | . . . . . | Hub shaping [2015-01] |
Y10T 29/49538 | . . . . | Tire making [2015-01] |
Y10T 29/4954 | . . . . | Wheel trim making, e.g., wheel cover, hubcap [2015-01] |
Y10T 29/49542 | . . . . . | with means for retaining trim member on wheel [2015-01] |
Y10T 29/49544 | . . | Roller making [2015-01] |
Y10T 29/49545 | . . . | Repairing or servicing [2015-01] |
Y10T 29/49547 | . . . | Assembling preformed components [2015-01] |
Y10T 29/49549 | . . . . | Work contacting surface element assembled to core [2015-01] |
Y10T 29/49551 | . . . . . | Work contacting surface wound about core [2015-01] |
Y10T 29/49552 | . . . . . | with prestressing of component by heat differential, e.g., shrink, fit [2015-01] |
Y10T 29/49554 | . . . . . | Work contacting surface having annular axial sections [2015-01] |
Y10T 29/49556 | . . . . | Work contacting surface element assembled to end support members [2015-01] |
Y10T 29/49558 | . . . . | Includes securing removable cover on roller [2015-01] |
Y10T 29/4956 | . . . | Fabricating and shaping roller work contacting surface element [2015-01] |
Y10T 29/49561 | . . . . | toothed roller [2015-01] |
Y10T 29/49563 | . . . . | with coating or casting about a core [2015-01] |
Y10T 29/49565 | . . . | One-piece roller making [2015-01] |
Y10T 29/49567 | . . | Dental appliance making [2015-01] |
Y10T 29/49568 | . . . | Orthodontic device making [2015-01] |
Y10T 29/4957 | . . | Sound device making [2015-01] |
Y10T 29/49572 | . . . | Hearing aid component making [2015-01] |
Y10T 29/49574 | . . . | Musical instrument or tuning fork making [2015-01] |
Y10T 29/49575 | . . . | including diaphragm or support therefor [2015-01] |
Y10T 29/49577 | . . . | Phonograph component making [2015-01] |
Y10T 29/49579 | . . | Watch or clock making [2015-01] |
Y10T 29/49581 | . . . | having arbor, pinion, or balance [2015-01] |
Y10T 29/49583 | . . . | having indicia, face, or dial [2015-01] |
Y10T 29/49584 | . . . | having case, cover, or back [2015-01] |
Y10T 29/49586 | . . . | having crown, stem, or pendent [2015-01] |
Y10T 29/49588 | . . | Jewelry or locket making [2015-01] |
Y10T 29/4959 | . . . | Human adornment device making [2015-01] |
Y10T 29/49591 | . . . . | Bracelet making [2015-01] |
Y10T 29/49593 | . . . . | Finger ring making [2015-01] |
Y10T 29/49595 | . . . | Latch, clasp, or fastener component making [2015-01] |
Y10T 29/49597 | . . . | Ornamental stock making [2015-01] |
Y10T 29/49599 | . . | Knob or knob shank making [2015-01] |
Y10T 29/496 | . . | Multiperforated metal article making [2015-01] |
Y10T 29/49602 | . . . | Coil wound wall screen [2015-01] |
Y10T 29/49604 | . . . | Filter [2015-01] |
Y10T 29/49606 | . . | Turnbuckle making [2015-01] |
Y10T 29/49607 | . . | Spring-head clip making [2015-01] |
Y10T 29/49609 | . . | Spring making [2015-01] |
Y10T 29/49611 | . . . | for vehicle or clutch [2015-01] |
Y10T 29/49613 | . . . | for human comfort [2015-01] |
Y10T 29/49615 | . . . | Resilient shock or vibration absorber utility [2015-01] |
Y10T 29/49616 | . . | Structural member making [2015-01] |
Y10T 29/49618 | . . . | Restoring existing member, e.g., reinforcing, repairing [2015-01] |
Y10T 29/4962 | . . . | Grille making [2015-01] |
Y10T 29/49622 | . . . | Vehicular structural member making [2015-01] |
Y10T 29/49623 | . . . | Static structure, e.g., a building component [2015-01] |
Y10T 29/49625 | . . . . | Openwork, e.g., a truss, joist, frame, lattice-type or box beam [2015-01] |
Y10T 29/49627 | . . . . . | Frame component [2015-01] |
Y10T 29/49629 | . . . . | Panel [2015-01] |
Y10T 29/49631 | . . . . | Columnar member [2015-01] |
Y10T 29/49632 | . . . . | Metal reinforcement member for nonmetallic, e.g., concrete, structural element [2015-01] |
Y10T 29/49634 | . . . . | Beam or girder [2015-01] |
Y10T 29/49636 | . . | Process for making bearing or component thereof [2015-01] |
Y10T 29/49638 | . . . | Repairing [2015-01] |
Y10T 29/49639 | . . . | Fluid bearing [2015-01] |
Y10T 29/49641 | . . . | Linear bearing [2015-01] |
Y10T 29/49643 | . . . | Rotary bearing [2015-01] |
Y10T 29/49645 | . . . . | Thrust bearing [2015-01] |
Y10T 29/49647 | . . . . | Plain bearing [2015-01] |
Y10T 29/49648 | . . . . . | Self-adjusting or self-aligning, including ball and socket type, bearing and component making [2015-01] |
Y10T 29/4965 | . . . . . . | Deforming socket to secure ball [2015-01] |
Y10T 29/49652 | . . . . . . . | Die-press shaping [2015-01] |
Y10T 29/49654 | . . . . . . . . | having liner [2015-01] |
Y10T 29/49655 | . . . . . . | having liner [2015-01] |
Y10T 29/49657 | . . . . . . | Socket making [2015-01] |
Y10T 29/49659 | . . . . . . . | by molding or casting [2015-01] |
Y10T 29/49661 | . . . . . . . | Nonmetallic socket [2015-01] |
Y10T 29/49663 | . . . . . . . | by assembling [2015-01] |
Y10T 29/49664 | . . . . . . | Ball making [2015-01] |
Y10T 29/49666 | . . . . . . . | with metallurgical bonding [2015-01] |
Y10T 29/49668 | . . . . . | Sleeve or bushing making [2015-01] |
Y10T 29/4967 | . . . . . . | Nonmetallic [2015-01] |
Y10T 29/49671 | . . . . . . | Strip or blank material shaping [2015-01] |
Y10T 29/49673 | . . . . . . . | Die-press shaping [2015-01] |
Y10T 29/49675 | . . . . . . . . | having inner lining layer [2015-01] |
Y10T 29/49677 | . . . . . . | having liner [2015-01] |
Y10T 29/49679 | . . . . | Anti-friction bearing or component thereof [2015-01] |
Y10T 29/4968 | . . . . . | Assembling of race, cage, and rolling anti-friction members [2015-01] |
Y10T 29/49682 | . . . . . | Assembling of race and rolling anti-friction members [2015-01] |
Y10T 29/49684 | . . . . . . | with race making [2015-01] |
Y10T 29/49686 | . . . . . | Assembling of cage and rolling anti-friction members [2015-01] |
Y10T 29/49687 | . . . . . . | with cage making [2015-01] |
Y10T 29/49689 | . . . . . | Race making [2015-01] |
Y10T 29/49691 | . . . . . | Cage making [2015-01] |
Y10T 29/49693 | . . . . . | Roller making [2015-01] |
Y10T 29/49694 | . . . . . | Ball making [2015-01] |
Y10T 29/49696 | . . . | Mounting [2015-01] |
Y10T 29/49698 | . . . | Demounting [2015-01] |
Y10T 29/497 | . . . | Pre-usage process, e.g., preloading, aligning [2015-01] |
Y10T 29/49702 | . . . | Lubricating [2015-01] |
Y10T 29/49703 | . . . | Sealing [2015-01] |
Y10T 29/49705 | . . . | Coating or casting [2015-01] |
Y10T 29/49707 | . . . | Bearing surface treatment [2015-01] |
Y10T 29/49709 | . . . | Specific metallic composition [2015-01] |
Y10T 29/4971 | . . . | Nonmetallic bearing element [2015-01] |
Y10T 29/49712 | . . | Ball making [2015-01] |
Y10T 29/49714 | . . . | Hollow ball [2015-01] |
Y10T 29/49716 | . . | Converting [2015-01] |
Y10T 29/49718 | . . | Repairing [2015-01] |
Y10T 29/49719 | . . . | Seal or element thereof [2015-01] |
Y10T 29/49721 | . . . | with disassembling [2015-01] |
Y10T 29/49723 | . . . . | including reconditioning of part [2015-01] |
Y10T 29/49725 | . . . . . | by shaping [2015-01] |
Y10T 29/49726 | . . . . . . | Removing material [2015-01] |
Y10T 29/49728 | . . . . . . . | and by a metallurgical operation, e.g., welding, diffusion bonding, casting [2015-01] |
Y10T 29/4973 | . . . . | Replacing of defective part [2015-01] |
Y10T 29/49732 | . . . | by attaching repair preform, e.g., remaking, restoring, or patching [2015-01] |
Y10T 29/49734 | . . . . | and removing damaged material [2015-01] |
Y10T 29/49735 | . . . . . | Mechanically attaching preform with separate fastener [2015-01] |
Y10T 29/49737 | . . . . . | Metallurgically attaching preform [2015-01] |
Y10T 29/49739 | . . . . | Mechanically attaching preform by separate fastener [2015-01] |
Y10T 29/49741 | . . . . . | Screw threaded fastener [2015-01] |
Y10T 29/49742 | . . . . | Metallurgically attaching preform [2015-01] |
Y10T 29/49744 | . . . . | Screw threaded preform [2015-01] |
Y10T 29/49746 | . . . | by applying fluent material, e.g., coating, casting [2015-01] |
Y10T 29/49748 | . . . | by shaping, e.g., bending, extruding, turning, etc. [2015-01] |
Y10T 29/4975 | . . . . | including heating [2015-01] |
Y10T 29/49751 | . . | Scrap recovering or utilizing [2015-01] |
Y10T 29/49753 | . . . | Metalworking to consolidate scrap [2015-01] |
Y10T 29/49755 | . . . | Separating one material from another [2015-01] |
Y10T 29/49757 | . . . . | by burning or heating [2015-01] |
Y10T 29/49758 | . . | During simulated operation or operating conditions [2015-01] |
Y10T 29/4976 | . . . | Temperature [2015-01] |
Y10T 29/49762 | . . | Center locating and shaping [2015-01] |
Y10T 29/49764 | . . | with testing or indicating [2015-01] |
Y10T 29/49766 | . . . | torquing threaded assemblage or determining torque herein [2015-01] |
Y10T 29/49767 | . . . . | Determining relative number of threaded member rotations [2015-01] |
Y10T 29/49769 | . . . | Using optical instrument [excludes mere human eyeballing] [2015-01] |
Y10T 29/49771 | . . . | Quantitative measuring or gauging [2015-01] |
Y10T 29/49773 | . . . . | by radioactive tracing [2015-01] |
Y10T 29/49774 | . . . . | by vibratory or oscillatory movement [2015-01] |
Y10T 29/49776 | . . . . | Pressure, force, or weight determining [2015-01] |
Y10T 29/49778 | . . . | with aligning, guiding, or instruction [2015-01] |
Y10T 29/4978 | . . . . | Assisting assembly or disassembly [2015-01] |
Y10T 29/49782 | . . | of a slide fastener [2015-01] |
Y10T 29/49783 | . . . | of slider [2015-01] |
Y10T 29/49785 | . . . | of interlocking element [2015-01] |
Y10T 29/49787 | . . | Obtaining plural composite product pieces from preassembled workpieces [2015-01] |
Y10T 29/49789 | . . | Obtaining plural product pieces from unitary workpiece [2015-01] |
Y10T 29/4979 | . . . | Breaking through weakened portion [2015-01] |
Y10T 29/49792 | . . . | Dividing through modified portion [2015-01] |
Y10T 29/49794 | . . . | Dividing on common outline [2015-01] |
Y10T 29/49796 | . . . | Coacting pieces [2015-01] |
Y10T 29/49798 | . . . | Dividing sequentially from leading end, e.g., by cutting or breaking [2015-01] |
Y10T 29/49799 | . . | Providing transitory integral holding or handling portion [2015-01] |
Y10T 29/49801 | . . | Shaping fiber or fibered material [2015-01] |
Y10T 29/49803 | . . | Magnetically shaping [2015-01] |
Y10T 29/49805 | . . | Shaping by direct application of fluent pressure [2015-01] |
Y10T 29/49806 | . . . | Explosively shaping [2015-01] |
Y10T 29/49808 | . . | Shaping container end to encapsulate material [2015-01] |
Y10T 29/4981 | . . | Utilizing transitory attached element or associated separate material [2015-01] |
Y10T 29/49812 | . . . | Temporary protective coating, impregnation, or cast layer [2015-01] |
Y10T 29/49813 | . . | Shaping mating parts for reassembly in different positions [2015-01] |
Y10T 29/49815 | . . | Disassembling [2015-01] |
Y10T 29/49817 | . . . | with other than ancillary treating or assembling [2015-01] |
Y10T 29/49819 | . . . | with conveying of work or disassembled work part [2015-01] |
Y10T 29/49821 | . . . | by altering or destroying work part or connector [2015-01] |
Y10T 29/49822 | . . . | by applying force [2015-01] |
Y10T 29/49824 | . . . . | to elastically deform work part or connector [2015-01] |
Y10T 29/49826 | . . | Assembling or joining [2015-01] |
Y10T 29/49828 | . . . | Progressively advancing of work assembly station or assembled portion of work [2015-01] |
Y10T 29/49829 | . . . . | Advancing work to successive stations [i.e., assembly line] [2015-01] |
Y10T 29/49831 | . . . . | Advancing station [2015-01] |
Y10T 29/49833 | . . . | Punching, piercing or reaming part by surface of second part [2015-01] |
Y10T 29/49835 | . . . . | with shaping [2015-01] |
Y10T 29/49837 | . . . . . | of first part [2015-01] |
Y10T 29/49838 | . . . | by stringing [2015-01] |
Y10T 29/4984 | . . . | Retaining clearance for motion between assembled parts [2015-01] |
Y10T 29/49842 | . . . . | Between tube-forming helical coils [2015-01] |
Y10T 29/49844 | . . . . | Through resilient media [2015-01] |
Y10T 29/49845 | . . . . | by deforming interlock [2015-01] |
Y10T 29/49847 | . . . . . | by folding part into plural ears [2015-01] |
Y10T 29/49849 | . . . . . | by wrapping around [2015-01] |
Y10T 29/49851 | . . . . . . | of link closure [2015-01] |
Y10T 29/49853 | . . . . . | of sphere, i.e., ball, in socket [2015-01] |
Y10T 29/49854 | . . . . . . | Ball point pen making [2015-01] |
Y10T 29/49856 | . . . . . . | Allowing assembled sphere to move in single plane only [2015-01] |
Y10T 29/49858 | . . . . . | of flange into tubular socket [2015-01] |
Y10T 29/4986 | . . . . . | Outwardly deforming internally fitted rod [2015-01] |
Y10T 29/49861 | . . . | Sizing mating parts during final positional association [2015-01] |
Y10T 29/49863 | . . . | with prestressing of part [2015-01] |
Y10T 29/49865 | . . . . | by temperature differential [e.g., shrink fit] [2015-01] |
Y10T 29/49867 | . . . . | of skin on frame member [2015-01] |
Y10T 29/49869 | . . . . . | by flexing [2015-01] |
Y10T 29/4987 | . . . . | Elastic joining of parts [2015-01] |
Y10T 29/49872 | . . . . . | Confining elastic part in socket [2015-01] |
Y10T 29/49874 | . . . . | Prestressing rod, filament or strand [2015-01] |
Y10T 29/49876 | . . . . | by snap fit [2015-01] |
Y10T 29/49877 | . . . | of flexible wall, expansible chamber devices [e.g., bellows] [2015-01] |
Y10T 29/49879 | . . . | Spaced wall tube or receptacle [2015-01] |
Y10T 29/49881 | . . . | of separate helix [e.g., screw thread] [2015-01] |
Y10T 29/49883 | . . . | Ribbing [2015-01] |
Y10T 29/49885 | . . . | with coating before or during assembling [2015-01] |
Y10T 29/49886 | . . . . | to roughen surface [2015-01] |
Y10T 29/49888 | . . . | Subsequently coating [2015-01] |
Y10T 29/4989 | . . . | with spreading of cable strands [2015-01] |
Y10T 29/49892 | . . . | Joining plate edge perpendicularly to frame [2015-01] |
Y10T 29/49893 | . . . | Peripheral joining of opposed mirror image parts to form a hollow body [2015-01] |
Y10T 29/49895 | . . . | Associating parts by use of aligning means [e.g., use of a drift pin or a "fixture"] [2015-01] |
Y10T 29/49897 | . . . . | Registering mating opposed tool parts [e.g., registering a punch and a cooperating die] [2015-01] |
Y10T 29/49899 | . . . . | by multiple cooperating aligning means [2015-01] |
Y10T 29/49901 | . . . . | Sequentially associating parts on stationary aligning means [2015-01] |
Y10T 29/49902 | . . . . | by manipulating aligning means [2015-01] |
Y10T 29/49904 | . . . | Assembling a subassembly, then assembling with a second subassembly [2015-01] |
Y10T 29/49906 | . . . | Metal deforming with nonmetallic bonding [2015-01] |
Y10T 29/49908 | . . . | Joining by deforming [2015-01] |
Y10T 29/49909 | . . . . | Securing cup or tube between axially extending concentric annuli [2015-01] |
Y10T 29/49911 | . . . . . | by expanding inner annulus [2015-01] |
Y10T 29/49913 | . . . . . | by constricting outer annulus [2015-01] |
Y10T 29/49915 | . . . . | Overedge assembling of seated part [2015-01] |
Y10T 29/49917 | . . . . . | by necking in cup or tube wall [2015-01] |
Y10T 29/49918 | . . . . . . | At cup or tube end [2015-01] |
Y10T 29/4992 | . . . . . | by flaring inserted cup or tube end [2015-01] |
Y10T 29/49922 | . . . . . | by bending over projecting prongs [2015-01] |
Y10T 29/49924 | . . . . | of parallel side-by-side elongated members [2015-01] |
Y10T 29/49925 | . . . . | Inward deformation of aperture or hollow body wall [2015-01] |
Y10T 29/49927 | . . . . . | Hollow body is axially joined cup or tube [2015-01] |
Y10T 29/49929 | . . . . . . | Joined to rod [2015-01] |
Y10T 29/49931 | . . . . . . . | Joined to overlapping ends of plural rods [2015-01] |
Y10T 29/49933 | . . . . . . . | After thinning [2015-01] |
Y10T 29/49934 | . . . . . | by axially applying force [2015-01] |
Y10T 29/49936 | . . . . | Surface interlocking [2015-01] |
Y10T 29/49938 | . . . . | Radially expanding part in cavity, aperture, or hollow body [2015-01] |
Y10T 29/4994 | . . . . . | Radially expanding internal tube [2015-01] |
Y10T 29/49941 | . . . . . | Peripheral edge joining of abutting plates [2015-01] |
Y10T 29/49943 | . . . . . | Riveting [2015-01] |
Y10T 29/49945 | . . . | by driven force fit [2015-01] |
Y10T 29/49947 | . . . | by applying separate fastener [2015-01] |
Y10T 29/49948 | . . . . | Multipart cooperating fastener [e.g., bolt and nut] [2015-01] |
Y10T 29/4995 | . . . . . | Nonthreaded [2015-01] |
Y10T 29/49952 | . . . . . | At least one part is nonmetallic [2015-01] |
Y10T 29/49954 | . . . . | Fastener deformed after application [2015-01] |
Y10T 29/49956 | . . . . . | Riveting [2015-01] |
Y10T 29/49957 | . . . . . . | At least one part nonmetallic [2015-01] |
Y10T 29/49959 | . . . . | Nonresilient fastener [2015-01] |
Y10T 29/49961 | . . . . . | At least one part nonmetallic [2015-01] |
Y10T 29/49963 | . . . . | Threaded fastener [2015-01] |
Y10T 29/49964 | . . . . . | At least one part nonmetallic [2015-01] |
Y10T 29/49966 | . . . . | with supplemental joining [2015-01] |
Y10T 29/49968 | . . . . . | Metal fusion joining [2015-01] |
Y10T 29/4997 | . . . . . | At least one part nonmetallic [2015-01] |
Y10T 29/49972 | . . | with separating, localizing, or eliminating of as-cast defects from a metal casting [e.g., anti-pipe] [2015-01] |
Y10T 29/49973 | . . . | Compressing ingot while still partially molten [2015-01] |
Y10T 29/49975 | . . . | Removing defects [2015-01] |
Y10T 29/49977 | . . . . | From center of ingot to leave hollow blank [2015-01] |
Y10T 29/49979 | . . . . | After deforming [2015-01] |
Y10T 29/4998 | . . | Combined manufacture including applying or shaping of fluent material [2015-01] |
Y10T 29/49982 | . . . | Coating [2015-01] |
Y10T 29/49984 | . . . . | and casting [2015-01] |
Y10T 29/49986 | . . . . | Subsequent to metal working [2015-01] |
Y10T 29/49988 | . . . | Metal casting [2015-01] |
Y10T 29/49989 | . . . . | Followed by cutting or removing material [2015-01] |
Y10T 29/49991 | . . . . | Combined with rolling [2015-01] |
Y10T 29/49993 | . . . | Filling of opening [2015-01] |
Y10T 29/49995 | . . | Shaping one-piece blank by removing material [2015-01] |
Y10T 29/49996 | . . . | Successive distinct removal operations [2015-01] |
Y10T 29/49998 | . . | Work holding [2015-01] |
Y10T 29/50 | . | Convertible metal working machine [2015-01] |
Y10T 29/505 | . . | Vise type [2015-01] |
Y10T 29/51 | . | Plural diverse manufacturing apparatus including means for metal shaping or assembling [2015-01] |
Y10T 29/5101 | . . | Slide fastener or slide fastener element [2015-01] |
Y10T 29/5102 | . . | Binding or covering and cutting [2015-01] |
Y10T 29/5103 | . . . | Cutting covering material only [2015-01] |
Y10T 29/5104 | . . | Type of machine [2015-01] |
Y10T 29/5105 | . . . | Drill press [2015-01] |
Y10T 29/5107 | . . . . | Drilling and other [2015-01] |
Y10T 29/5108 | . . . . | Portable [2015-01] |
Y10T 29/5109 | . . . | Lathe [2015-01] |
Y10T 29/511 | . . . . | Grinding attachment [2015-01] |
Y10T 29/5111 | . . . . | Pulley or wheel [2015-01] |
Y10T 29/5112 | . . . . | Convertible [2015-01] |
Y10T 29/5113 | . . . . | Commutator [2015-01] |
Y10T 29/5114 | . . . . | Lathe and tool [2015-01] |
Y10T 29/5115 | . . . | Planer [2015-01] |
Y10T 29/5116 | . . | forging and bending, cutting or punching [2015-01] |
Y10T 29/5117 | . . . | Fastener [zipper] [2015-01] |
Y10T 29/5118 | . . . | Riveting [2015-01] |
Y10T 29/512 | . . . | Ball making [2015-01] |
Y10T 29/5121 | . . . | Wire working [2015-01] |
Y10T 29/5122 | . . | with means to feed work during tool contact [2015-01] |
Y10T 29/5123 | . . . | including nonrotary flying tool [2015-01] |
Y10T 29/5124 | . . | with means to feed work intermittently from one tool station to another [2015-01] |
Y10T 29/5125 | . . . | Stock turret [2015-01] |
Y10T 29/5126 | . . . . | Swiss type [2015-01] |
Y10T 29/5127 | . . . | Blank turret [2015-01] |
Y10T 29/5128 | . . . . | Rotary work - vertical axis [2015-01] |
Y10T 29/5129 | . . . . | Rotary work - horizontal axis [2015-01] |
Y10T 29/513 | . . . . | Stationary work [2015-01] |
Y10T 29/5132 | . . . . | Belt drive [2015-01] |
Y10T 29/5133 | . . . . | Crankshaft [2015-01] |
Y10T 29/5134 | . . . . | Collapsible tube [2015-01] |
Y10T 29/5135 | . . . | Endless belt [2015-01] |
Y10T 29/5136 | . . | Separate tool stations for selective or successive operation on work [2015-01] |
Y10T 29/5137 | . . . | including assembling or disassembling station [2015-01] |
Y10T 29/5138 | . . . . | and means to machine work part to fit cooperating work part [2015-01] |
Y10T 29/5139 | . . . . | and means to sever work prior to disassembling [2015-01] |
Y10T 29/514 | . . . . . | comprising means to strip insulation from wire [2015-01] |
Y10T 29/5141 | . . . . | and means to stake electric wire to commutator or armature in assembling of electric motor or generator [2015-01] |
Y10T 29/5142 | . . . . | and means to sever work from supply [2015-01] |
Y10T 29/5143 | . . . . | and means to machine product [2015-01] |
Y10T 29/5145 | . . . . . | to sever product to length [2015-01] |
Y10T 29/5146 | . . | Common reciprocating support for spaced tools [2015-01] |
Y10T 29/5147 | . . | including composite tool [2015-01] |
Y10T 29/5148 | . . . | including severing means [2015-01] |
Y10T 29/5149 | . . . . | to sever electric terminal from supply strip [2015-01] |
Y10T 29/515 | . . . . | to trim electric component [2015-01] |
Y10T 29/5151 | . . . . . | Means comprising hand-manipulatable implement [2015-01] |
Y10T 29/5152 | . . | with turret mechanism [2015-01] |
Y10T 29/5153 | . . . | Multiple turret [2015-01] |
Y10T 29/5154 | . . . | tool turret [2015-01] |
Y10T 29/5155 | . . . . | Rotary tool holder [2015-01] |
Y10T 29/5157 | . . . . | Sliding tool holder [2015-01] |
Y10T 29/5158 | . . . . | Fluid operated [2015-01] |
Y10T 29/5159 | . . . . | Cam operated [2015-01] |
Y10T 29/516 | . . . . . | Longitudinal turret axis [2015-01] |
Y10T 29/5161 | . . . . . | Transverse turret axis [2015-01] |
Y10T 29/5162 | . . . . | Lever operated [2015-01] |
Y10T 29/5163 | . . . . | Rack-and-pinion operated [2015-01] |
Y10T 29/5164 | . . . . | Screw operated [2015-01] |
Y10T 29/5165 | . . . | including rotating and/or locking means [2015-01] |
Y10T 29/5166 | . . . . | Frictional and positive [2015-01] |
Y10T 29/5167 | . . . . | Lock means for tool or work turrets [2015-01] |
Y10T 29/5168 | . . | Multiple-tool holder [2015-01] |
Y10T 29/517 | . . . | Laterally movable stock holder [2015-01] |
Y10T 29/5171 | . . . | Axial tool and transversely movable slide rest [2015-01] |
Y10T 29/5172 | . . . . | Rotary tool spindle [2015-01] |
Y10T 29/5173 | . . . | Longitudinally and transversely movable [2015-01] |
Y10T 29/5174 | . . . . | Rotary tool spindle [2015-01] |
Y10T 29/5175 | . . . | Oscillating tool [2015-01] |
Y10T 29/5176 | . . | including machining means [2015-01] |
Y10T 29/5177 | . . . | and work-holder for assembly [2015-01] |
Y10T 29/5178 | . . | Attachment [2015-01] |
Y10T 29/5179 | . . | Speed controller [2015-01] |
Y10T 29/518 | . . | Carriage stop mechanism [2015-01] |
Y10T 29/5182 | . . | Flash remover [2015-01] |
Y10T 29/5183 | . . | Welding strip ends [2015-01] |
Y10T 29/5184 | . . | Casting and working [2015-01] |
Y10T 29/5185 | . . | Tube making [2015-01] |
Y10T 29/5186 | . . | Covering [2015-01] |
Y10T 29/5187 | . . | Wire working [2015-01] |
Y10T 29/5188 | . . | Radiator making [2015-01] |
Y10T 29/5189 | . . | Printing plate [2015-01] |
Y10T 29/519 | . . | Turret [2015-01] |
Y10T 29/5191 | . . | Assembly [2015-01] |
Y10T 29/5192 | . . | Armature [2015-01] |
Y10T 29/5193 | . . | Electrical connector or terminal [2015-01] |
Y10T 29/5195 | . . | Tire valve or spark plug [2015-01] |
Y10T 29/5196 | . . | Multiple station with conveyor [2015-01] |
Y10T 29/5197 | . . | Multiple stations working strip material [2015-01] |
Y10T 29/5198 | . . | Continuous strip [2015-01] |
Y10T 29/5199 | . . | Work on tubes [2015-01] |
Y10T 29/52 | . | Plural diverse manufacturing apparatus [2015-01] |
Y10T 29/53 | . | Means to assemble or disassemble [2015-01] |
Y10T 29/53004 | . . | with means to regulate operation by use of templet, tape, card or other replaceable information supply [2015-01] |
Y10T 29/53009 | . . . | with comparator [2015-01] |
Y10T 29/53013 | . . . . | Computer input [2015-01] |
Y10T 29/53017 | . . . | Web or strand-carried information supply [2015-01] |
Y10T 29/53022 | . . | with means to test work or product [2015-01] |
Y10T 29/53026 | . . | with randomly actuated stopping or disabling means [2015-01] |
Y10T 29/5303 | . . . | Responsive to condition of work or product [2015-01] |
Y10T 29/53035 | . . . | Responsive to operative [e.g., safety device, etc.] [2015-01] |
Y10T 29/53039 | . . | with control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 29/53043 | . . . | including means to divert defective work part [2015-01] |
Y10T 29/53048 | . . . | Multiple station assembly or disassembly apparatus [2015-01] |
Y10T 29/53052 | . . . . | including position sensor [2015-01] |
Y10T 29/53057 | . . . | Responsive to timer [2015-01] |
Y10T 29/53061 | . . . | Responsive to work or work-related machine element [2015-01] |
Y10T 29/53065 | . . . . | with means to fasten by deformation [2015-01] |
Y10T 29/5307 | . . . . . | Self-piercing work part [2015-01] |
Y10T 29/53074 | . . . . | with means to fasten by elastic joining [2015-01] |
Y10T 29/53078 | . . . . | with means to fasten by frictional fitting [2015-01] |
Y10T 29/53083 | . . . . | including means to apply magnetic force directly to position or hold work [2015-01] |
Y10T 29/53087 | . . | with signal, scale, illuminator, or optical viewer [2015-01] |
Y10T 29/53091 | . . . | for work-holder for assembly or disassembly [2015-01] |
Y10T 29/53096 | . . | including means to provide a controlled environment [2015-01] |
Y10T 29/531 | . . | Nuclear device [2015-01] |
Y10T 29/53104 | . . | Roller or ball bearing [2015-01] |
Y10T 29/53109 | . . . | including deforming means [2015-01] |
Y10T 29/53113 | . . | Heat exchanger [2015-01] |
Y10T 29/53117 | . . . | including means to manipulate heat exchanger tube bundle [2015-01] |
Y10T 29/53122 | . . . | including deforming means [2015-01] |
Y10T 29/53126 | . . | Means to place sheath on running-length core [2015-01] |
Y10T 29/5313 | . . | Means to assemble electrical device [2015-01] |
Y10T 29/53135 | . . . | Storage cell or battery [2015-01] |
Y10T 29/53139 | . . . . | including deforming means [2015-01] |
Y10T 29/53143 | . . . | Motor or generator [2015-01] |
Y10T 29/53148 | . . . . | Means to assemble commutator [2015-01] |
Y10T 29/53152 | . . . . | Means to position insulation [2015-01] |
Y10T 29/53157 | . . . . | Means to stake wire to commutator or armature [2015-01] |
Y10T 29/53161 | . . . . | including deforming means [2015-01] |
Y10T 29/53165 | . . . | Magnetic memory device [2015-01] |
Y10T 29/5317 | . . . | Laminated device [2015-01] |
Y10T 29/53174 | . . . | Means to fasten electrical component to wiring board, base, or substrate [2015-01] |
Y10T 29/53178 | . . . . | Chip component [2015-01] |
Y10T 29/53183 | . . . . | Multilead component [2015-01] |
Y10T 29/53187 | . . . | Multiple station assembly apparatus [2015-01] |
Y10T 29/53191 | . . . | Means to apply vacuum directly to position or hold work part [2015-01] |
Y10T 29/53196 | . . . | Means to apply magnetic force directly to position or hold work part [2015-01] |
Y10T 29/532 | . . . | Conductor [2015-01] |
Y10T 29/53204 | . . . . | Electrode [2015-01] |
Y10T 29/53209 | . . . . | Terminal or connector [2015-01] |
Y10T 29/53213 | . . . . . | Assembled to wire-type conductor [2015-01] |
Y10T 29/53217 | . . . . . . | Means to simultaneously assemble multiple, independent conductors to terminal [2015-01] |
Y10T 29/53222 | . . . . . . | Means comprising hand-manipulatable implement [2015-01] |
Y10T 29/53226 | . . . . . . . | Fastening by deformation [2015-01] |
Y10T 29/5323 | . . . . . . . | Fastening by elastic joining [2015-01] |
Y10T 29/53235 | . . . . . . | Means to fasten by deformation [2015-01] |
Y10T 29/53239 | . . . . . . | Means to fasten by elastic joining [2015-01] |
Y10T 29/53243 | . . . . | Multiple, independent conductors [2015-01] |
Y10T 29/53248 | . . . . | Switch or fuse [2015-01] |
Y10T 29/53252 | . . . | Means to simultaneously fasten three or more parts [2015-01] |
Y10T 29/53257 | . . . | Means comprising hand-manipulatable implement [2015-01] |
Y10T 29/53261 | . . . | Means to align and advance work part [2015-01] |
Y10T 29/53265 | . . . | with work-holder for assembly [2015-01] |
Y10T 29/5327 | . . . | Means to fasten by deforming [2015-01] |
Y10T 29/53274 | . . | Means to disassemble electrical device [2015-01] |
Y10T 29/53278 | . . . | Storage cell or battery [2015-01] |
Y10T 29/53283 | . . . | Means comprising hand-manipulatable implement [2015-01] |
Y10T 29/53287 | . . | Means to place traveler on ring or ring on bobbin of a textile machine [2015-01] |
Y10T 29/53291 | . . | Slide fastener [2015-01] |
Y10T 29/53296 | . . . | Means to assemble stop onto stringer [2015-01] |
Y10T 29/533 | . . . | Means to assemble slider onto stringer [2015-01] |
Y10T 29/53304 | . . . | Means to assemble teeth onto stringer [2015-01] |
Y10T 29/53309 | . . . | Disassembly means [2015-01] |
Y10T 29/53313 | . . | Means to interrelatedly feed plural work parts from plural sources without manual intervention [2015-01] |
Y10T 29/53317 | . . . | Box or pallet assembly means [2015-01] |
Y10T 29/53322 | . . . | Means to assemble container [2015-01] |
Y10T 29/53326 | . . . . | Handle to container [2015-01] |
Y10T 29/5333 | . . . . | Label to container [2015-01] |
Y10T 29/53335 | . . . . | Pressurized dispensing container [2015-01] |
Y10T 29/53339 | . . . . | Hypodermic syringe [2015-01] |
Y10T 29/53343 | . . . . | including fluid component [2015-01] |
Y10T 29/53348 | . . . | Running-length work [2015-01] |
Y10T 29/53352 | . . . . | Means including orbiting running-length work supply [2015-01] |
Y10T 29/53357 | . . . . | Pipe section [2015-01] |
Y10T 29/53361 | . . . . | Assembled to article [2015-01] |
Y10T 29/53365 | . . . | Multiple station assembly apparatus [2015-01] |
Y10T 29/5337 | . . . | including assembly pallet [2015-01] |
Y10T 29/53374 | . . . | including turret-type conveyor [2016-05] |
Y10T 29/53378 | . . . | including converging conveyors [2016-05] |
Y10T 29/53383 | . . . | and means to fasten work parts together [2015-01] |
Y10T 29/53387 | . . . . | by deforming [2015-01] |
Y10T 29/53391 | . . . . | by elastic joining [2015-01] |
Y10T 29/53396 | . . . . | by friction fit [2015-01] |
Y10T 29/534 | . . | Multiple station assembly or disassembly apparatus [2015-01] |
Y10T 29/53404 | . . . | including turret-type conveyor [2016-05] |
Y10T 29/53409 | . . . | including converging conveyors [2016-05] |
Y10T 29/53413 | . . . . | and primary central conveyor [2016-05] |
Y10T 29/53417 | . . . | Means to fasten work parts together [2015-01] |
Y10T 29/53422 | . . . . | by deforming [2015-01] |
Y10T 29/53426 | . . . . | by elastic joining [2015-01] |
Y10T 29/5343 | . . | Means to drive self-piercing work part [2015-01] |
Y10T 29/53435 | . . | including assembly pallet [2015-01] |
Y10T 29/53439 | . . | including provision to utilize thermal expansion of work [2015-01] |
Y10T 29/53443 | . . | Means to assemble or disassemble container and fluid component [2015-01] |
Y10T 29/53448 | . . | Vehicle wheel [2015-01] |
Y10T 29/53452 | . . . | Railway wheel [2015-01] |
Y10T 29/53457 | . . | Tumbler lock [2015-01] |
Y10T 29/53461 | . . | toy doll [2015-01] |
Y10T 29/53465 | . . | Film or tape cartridge [2015-01] |
Y10T 29/5347 | . . | Crystal to watch or clock [2015-01] |
Y10T 29/53474 | . . | Means to insert or extract pen point [2015-01] |
Y10T 29/53478 | . . | with magazine supply [2015-01] |
Y10T 29/53483 | . . . | and magnetic work-holder or positioner [2015-01] |
Y10T 29/53487 | . . . | Assembling means comprising hand-manipulatable implement [2015-01] |
Y10T 29/53491 | . . . . | One work part comprising living tissue [2015-01] |
Y10T 29/53496 | . . . . | comprising driver for snap-off-mandrel fastener; e.g., Pop [TM] riveter [2015-01] |
Y10T 29/535 | . . . . | One work part comprising nut or screw [2015-01] |
Y10T 29/53504 | . . . . | One work part comprising paper clip [2015-01] |
Y10T 29/53509 | . . . . | Means to assemble tire stud into tire tread [2015-01] |
Y10T 29/53513 | . . . . | Means to fasten by deforming [2015-01] |
Y10T 29/53517 | . . . . . | Fastening sinker to fishing line [2015-01] |
Y10T 29/53522 | . . . | Means to fasten by deforming [2015-01] |
Y10T 29/53526 | . . | Running-length work [2015-01] |
Y10T 29/5353 | . . . | Assembled on core [2015-01] |
Y10T 29/53535 | . . | including means to vibrate work [2015-01] |
Y10T 29/53539 | . . | including work conveyor [2016-05] |
Y10T 29/53543 | . . . | including transporting track [2015-01] |
Y10T 29/53548 | . . . . | and work carrying vehicle [2015-01] |
Y10T 29/53552 | . . | Valve applying or removing [2015-01] |
Y10T 29/53557 | . . . | Engine valve unit puller or applier [2015-01] |
Y10T 29/53561 | . . . | Engine valve spring compressor [only] [2015-01] |
Y10T 29/53565 | . . . . | Plural spring engagement [2015-01] |
Y10T 29/5357 | . . . . | Screw operated [2015-01] |
Y10T 29/53574 | . . . . . | Parallel or tong type, side entrance [2015-01] |
Y10T 29/53578 | . . . . | Lever operated [2015-01] |
Y10T 29/53583 | . . . . . | Single jaw or valve engagement [2015-01] |
Y10T 29/53587 | . . . . . | Plier type [2015-01] |
Y10T 29/53591 | . . . | to or from wheel rim of resilient tire or tube [2015-01] |
Y10T 29/53596 | . . . | Removal tool [2015-01] |
Y10T 29/536 | . . | Piston ring inserter or remover [2015-01] |
Y10T 29/53604 | . . . | Plier-type operation [2015-01] |
Y10T 29/53609 | . . . . | with ring encirclement [2015-01] |
Y10T 29/53613 | . . | Spring applier or remover [2015-01] |
Y10T 29/53617 | . . . | Transmission spring [2015-01] |
Y10T 29/53622 | . . . | Helical spring [2015-01] |
Y10T 29/53626 | . . . | Flat spiral spring [e.g., watch or clock type] [2015-01] |
Y10T 29/5363 | . . . | Circular spring [2015-01] |
Y10T 29/53635 | . . . | Leaf spring [2015-01] |
Y10T 29/53639 | . . | Means to stake watch or clock [2015-01] |
Y10T 29/53643 | . . . | Plier type [2015-01] |
Y10T 29/53648 | . . | Brake lining to brake shoe [2015-01] |
Y10T 29/53652 | . . | Tube and coextensive core [2015-01] |
Y10T 29/53657 | . . | to apply or remove a resilient article [e.g., tube, sleeve, etc.] [2015-01] |
Y10T 29/53661 | . . . | Nipple to nursing bottle [2015-01] |
Y10T 29/53665 | . . . | Well protector to sucker rod [2015-01] |
Y10T 29/5367 | . . | Coupling to conduit [2015-01] |
Y10T 29/53674 | . . | Loose-leaf sheet binder [2015-01] |
Y10T 29/53678 | . . | Compressing parts together face to face [2015-01] |
Y10T 29/53683 | . . | Spreading parts apart or separating them from face to face engagement [2015-01] |
Y10T 29/53687 | . . | by rotation of work part [2015-01] |
Y10T 29/53691 | . . . | Means to insert or remove helix [2015-01] |
Y10T 29/53696 | . . | Means to string [2015-01] |
Y10T 29/537 | . . | tool handle and tool [2015-01] |
Y10T 29/53704 | . . | tool chuck and tool [2015-01] |
Y10T 29/53709 | . . | Overedge assembling means [2015-01] |
Y10T 29/53713 | . . . | Belt-hook attacher [2015-01] |
Y10T 29/53717 | . . . | Annular work [2015-01] |
Y10T 29/53722 | . . . . | with radially acting tool inside annular work [2015-01] |
Y10T 29/53726 | . . . . | with second workpiece inside annular work one workpiece moved to shape the other [2015-01] |
Y10T 29/5373 | . . . . . | comprising driver for snap-off-mandrel fastener; e.g., Pop [TM] riveter [2015-01] |
Y10T 29/53735 | . . . . . . | including near side fastener shaping tool [2015-01] |
Y10T 29/53739 | . . . . . . | Pneumatic- or fluid-actuated tool [2015-01] |
Y10T 29/53743 | . . . . . . . | Liquid [2015-01] |
Y10T 29/53748 | . . . . . . . . | and gas [2015-01] |
Y10T 29/53752 | . . . . . . | having rotary drive mechanism [2015-01] |
Y10T 29/53757 | . . . . . . | having allochiral actuating handles [2015-01] |
Y10T 29/53761 | . . . . . . | having repositionable annulus engaging tool [2015-01] |
Y10T 29/53765 | . . . . . | including near side fastener shaping tool [2015-01] |
Y10T 29/5377 | . . . | Riveter [2015-01] |
Y10T 29/53774 | . . . . | Single header [2015-01] |
Y10T 29/53778 | . . . . . | Pipe joiner [2015-01] |
Y10T 29/53783 | . . . | Clip applier [2015-01] |
Y10T 29/53787 | . . . | Binding or covering [2015-01] |
Y10T 29/53791 | . . . . | Edge binding [2015-01] |
Y10T 29/53796 | . . | Puller or pusher means, contained force multiplying operator [2015-01] |
Y10T 29/538 | . . . | Hubcap and hub [2015-01] |
Y10T 29/53804 | . . . | Battery post and terminal [2015-01] |
Y10T 29/53809 | . . . | Cotter pin and cooperating member [2015-01] |
Y10T 29/53813 | . . . . | Plier type means [2015-01] |
Y10T 29/53817 | . . . | Valve stem pin or key and another member [2015-01] |
Y10T 29/53822 | . . . | Machine key and another member [2015-01] |
Y10T 29/53826 | . . . | Arbor-type press means [2015-01] |
Y10T 29/5383 | . . . | having fluid operator [2015-01] |
Y10T 29/53835 | . . . | having wedge operator [2015-01] |
Y10T 29/53839 | . . . | having percussion or explosive operator [2015-01] |
Y10T 29/53843 | . . . . | Tube, sleeve, or ferrule inserting or removing [2015-01] |
Y10T 29/53848 | . . . | having screw operator [2015-01] |
Y10T 29/53852 | . . . . | C-frame [2015-01] |
Y10T 29/53857 | . . . . | Central screw, work-engagers around screw [2015-01] |
Y10T 29/53861 | . . . . . | Work-engager arms along or parallel to screw [2015-01] |
Y10T 29/53865 | . . . . . . | with arm connecting engaging means [2015-01] |
Y10T 29/5387 | . . . . . . | Pivotal arms [2015-01] |
Y10T 29/53874 | . . . . . . | Pivotal grippers on screw [2015-01] |
Y10T 29/53878 | . . . . . | Tubular or tube segment forms work-engager [2015-01] |
Y10T 29/53883 | . . . . . . | Screw threaded work-engager [2015-01] |
Y10T 29/53887 | . . . . . . | Movable grippers on screw [2015-01] |
Y10T 29/53891 | . . . . . | Plate or bar forms work-engager [2015-01] |
Y10T 29/53896 | . . . | having lever operator [2015-01] |
Y10T 29/539 | . . . . | Plier type means [2015-01] |
Y10T 29/53904 | . . | Means comprising piston ring group contractor or holder [2015-01] |
Y10T 29/53909 | . . | Means comprising hand manipulatable tool [2015-01] |
Y10T 29/53913 | . . . | Aligner or center [2015-01] |
Y10T 29/53917 | . . . . | Tube with tube [2015-01] |
Y10T 29/53922 | . . . . | Auto wheel with auto chassis [2015-01] |
Y10T 29/53926 | . . . . | Clutch plates [2015-01] |
Y10T 29/5393 | . . . | Means comprising impact receiving tool [2015-01] |
Y10T 29/53935 | . . . . | C-frame [2015-01] |
Y10T 29/53939 | . . . . | Thread protector [e.g., wheel axle type] [2015-01] |
Y10T 29/53943 | . . . | Hand gripper for direct push or pull [2015-01] |
Y10T 29/53948 | . . . . | Centrifugal separator [2015-01] |
Y10T 29/53952 | . . . . | Tube sleeve or ferrule applying or removing [2015-01] |
Y10T 29/53957 | . . . . . | Thread-tapping grip [2015-01] |
Y10T 29/53961 | . . | with work-holder for assembly [2015-01] |
Y10T 29/53965 | . . . | for assembling a luminescent mantle [2015-01] |
Y10T 29/5397 | . . . | and assembling press [e.g., truss assembling means, etc.] [2015-01] |
Y10T 29/53974 | . . . | having means to permit support movement while work is thereon [2015-01] |
Y10T 29/53978 | . . | including means to relatively position plural work parts [2015-01] |
Y10T 29/53983 | . . | Work-supported apparatus [2015-01] |
Y10T 29/53987 | . . | Tube, sleeve or ferrule [2015-01] |
Y10T 29/53991 | . . | Work gripper, anvil, or element [2015-01] |
Y10T 29/53996 | . . | by deforming [2015-01] |
Y10T 29/54 | . | Miscellaneous apparatus [2015-01] |
Former US Class 70 series [2015-04] |
Y10T 70/00 | Locks [2015-04] |
Y10T 70/10 | . | Miscellaneous [2015-04] |
Y10T 70/20 | . | Attack-actuated defeating mechanisms [2015-04] |
Y10T 70/25 | . . | With reset mechanisms [2015-04] |
Y10T 70/30 | . | Hasp [2015-04] |
Y10T 70/308 | . . | Combination lock [2015-04] |
Y10T 70/317 | . . . | Hasp-carried [2015-04] |
Y10T 70/325 | . . . | Keeper-carried [2015-04] |
Y10T 70/333 | . . | Key lock [2015-04] |
Y10T 70/342 | . . . | Hasp-carried [2015-04] |
Y10T 70/35 | . . . . | Keeper-encasing [2015-04] |
Y10T 70/358 | . . . . . | Dead bolt [2015-04] |
Y10T 70/367 | . . . . . | Latching bolt [2015-04] |
Y10T 70/375 | . . . . | Dead bolt [2015-04] |
Y10T 70/383 | . . . . | Latching bolt [2015-04] |
Y10T 70/392 | . . . | Keeper-carried [2015-04] |
Y10T 70/40 | . | Portable [2015-04] |
Y10T 70/402 | . . | Fetters [2015-04] |
Y10T 70/404 | . . . | Manacles and cuffs [2015-04] |
Y10T 70/407 | . . . . | Nippers [2015-04] |
Y10T 70/409 | . . . | Shackles [2015-04] |
Y10T 70/411 | . . | Clamps [2015-04] |
Y10T 70/413 | . . | Padlocks [2015-04] |
Y10T 70/415 | . . . | Combination and/or key-controlled [2015-04] |
Y10T 70/417 | . . . | Combination-controlled [2015-04] |
Y10T 70/42 | . . . . | Non-shackle type [2015-04] |
Y10T 70/422 | . . . . | Rigid shackle [2015-04] |
Y10T 70/424 | . . . . . | Sliding [2015-04] |
Y10T 70/426 | . . . . . . | Removable [2015-04] |
Y10T 70/428 | . . . . . | Pivoted [2015-04] |
Y10T 70/43 | . . . . . . | Sliding detent [2015-04] |
Y10T 70/433 | . . . . . . | Swinging detent [2015-04] |
Y10T 70/435 | . . . . | Flexible shackle [2015-04] |
Y10T 70/437 | . . . | Key-controlled [2015-04] |
Y10T 70/439 | . . . . | Non-shackle type [2015-04] |
Y10T 70/441 | . . . . . | Housing extension and cooperating detent [2015-04] |
Y10T 70/443 | . . . . . | Single stem or shank [2015-04] |
Y10T 70/446 | . . . . | Rigid shackle [2015-04] |
Y10T 70/448 | . . . . . | Divided shackle [2015-04] |
Y10T 70/45 | . . . . . . | Divided jaw type [2015-04] |
Y10T 70/452 | . . . . . | Sliding [2015-04] |
Y10T 70/454 | . . . . . . | Removable [2015-04] |
Y10T 70/457 | . . . . . . | Arcuate locus [2015-04] |
Y10T 70/459 | . . . . . . | Both legs engaged [2015-04] |
Y10T 70/461 | . . . . . . | Short leg engaged [2015-04] |
Y10T 70/463 | . . . . . . | Long leg engaged [2015-04] |
Y10T 70/465 | . . . . . | Pivoted [2015-04] |
Y10T 70/467 | . . . . . . | Sliding detent [2015-04] |
Y10T 70/47 | . . . . . . . | Free end only engaged [2015-04] |
Y10T 70/472 | . . . . . . . | Pivoted end only engaged [2015-04] |
Y10T 70/474 | . . . . . . | Swinging detent [2015-04] |
Y10T 70/476 | . . . . . . . | Free end only engaged [2015-04] |
Y10T 70/478 | . . . . . . . | Pivoted end only engaged [2015-04] |
Y10T 70/48 | . . . . . . | Arcuate locus [2015-04] |
Y10T 70/483 | . . . . | Flexible shackle [2015-04] |
Y10T 70/485 | . . . | With seal [2015-04] |
Y10T 70/487 | . . . | Parts, accessories, attachments and adjuncts [2015-04] |
Y10T 70/489 | . . . . | Housings [2015-04] |
Y10T 70/491 | . . . . | Shackles [2015-04] |
Y10T 70/493 | . . . . | Protectors [2015-04] |
Y10T 70/496 | . . . . . | Sheaths [2015-04] |
Y10T 70/498 | . . . . . | Shields or canopies [2015-04] |
Y10T 70/50 | . | Special application [2015-04] |
Y10T 70/5004 | . . | For antitheft signaling device on protected article [2015-04] |
Y10T 70/5009 | . . | For portable articles [2015-04] |
Y10T 70/5013 | . . . | Canes, umbrellas, apparel [2015-04] |
Y10T 70/5018 | . . . | Robes [2015-04] |
Y10T 70/5022 | . . . | Tools [2015-04] |
Y10T 70/5027 | . . . | Supporting stands [2015-04] |
Y10T 70/5031 | . . . | Receptacle [2015-04] |
Y10T 70/5035 | . . . . | Bag [2015-04] |
Y10T 70/504 | . . . . . | Collapsible throat [2015-04] |
Y10T 70/5044 | . . . . . | Pivoted rigid jaw [2015-04] |
Y10T 70/5049 | . . . . . | Attache or briefcase, portfolio [2015-04] |
Y10T 70/5053 | . . . . . . | Interengageable slide fastener type [2015-04] |
Y10T 70/5058 | . . . . | Trunk and/or suitcase [2015-04] |
Y10T 70/5062 | . . . . . | Projecting fixed or movable lug type [2015-04] |
Y10T 70/5066 | . . . . . | Bolt type [2015-04] |
Y10T 70/5071 | . . . . . . | Hasp controlled [2015-04] |
Y10T 70/5075 | . . . . . | Link and lever of hasp type [2015-04] |
Y10T 70/508 | . . . . . | Hasp type [2015-04] |
Y10T 70/5084 | . . . . . . | Hasp-carried lock [2015-04] |
Y10T 70/5089 | . . . . . | Loop type [2015-04] |
Y10T 70/5093 | . . | For closures [2015-04] |
Y10T 70/5097 | . . . | Cabinet [2015-04] |
Y10T 70/5102 | . . . . | Projecting lug type [2015-04] |
Y10T 70/5106 | . . . . . | External catch [2015-04] |
Y10T 70/5111 | . . . . | Projectable bolt [2015-04] |
Y10T 70/5115 | . . . . . | Multiple bolts [2015-04] |
Y10T 70/5119 | . . . . . | Multidirectional displacement [2015-04] |
Y10T 70/5124 | . . . . . | Swinging and hooked end [2015-04] |
Y10T 70/5128 | . . . | Drawer [2015-04] |
Y10T 70/5133 | . . . . | Dead bolt [2015-04] |
Y10T 70/5137 | . . . . | Till [2015-04] |
Y10T 70/5142 | . . . . . | Combination [2015-04] |
Y10T 70/5146 | . . . | Window [2015-04] |
Y10T 70/515 | . . . . | Sliding sash [2015-04] |
Y10T 70/5155 | . . . | Door [2015-04] |
Y10T 70/5159 | . . . . | Emergency exit [2015-04] |
Y10T 70/5164 | . . . . | Links to limit opening [2015-04] |
Y10T 70/5168 | . . . . | Braces [2015-04] |
Y10T 70/5173 | . . . . | Sliding door [2015-04] |
Y10T 70/5177 | . . . . . | Extending keeper [2015-04] |
Y10T 70/5181 | . . . . . . | Rigid or fixed [2015-04] |
Y10T 70/5186 | . . . . . . | Extensible [2015-04] |
Y10T 70/519 | . . . . . | Projecting or extending bolt [2015-04] |
Y10T 70/5195 | . . . . . | Projectable bolt [2015-04] |
Y10T 70/5199 | . . . . | Swinging door [2015-04] |
Y10T 70/5204 | . . . . . | Interfitting lock housing and keeper [2015-04] |
Y10T 70/5208 | . . . . . . | Multiple dead bolts [2015-04] |
Y10T 70/5212 | . . . . . . | Sliding dead bolt [2015-04] |
Y10T 70/5217 | . . . . . . | Swinging dead bolt [2015-04] |
Y10T 70/5221 | . . . . . . | Locking latch bolt, biased [2015-04] |
Y10T 70/5226 | . . . . . | Combined dead bolt and latching bolt [2015-04] |
Y10T 70/523 | . . . . . . | Multiple dead bolts [2015-04] |
Y10T 70/5235 | . . . . . . | Multiple latch bolts [2015-04] |
Y10T 70/5239 | . . . . . . | Dead bolt, dogged latch bolt [2015-04] |
Y10T 70/5243 | . . . . . . | Manually dogged latch bolt [2015-04] |
Y10T 70/5246 | . . . . . | Dead bolts [2015-04] |
Y10T 70/5248 | . . . . . . | Multiple [2015-04] |
Y10T 70/5252 | . . . . . . . | Sliding and swinging [2015-04] |
Y10T 70/5257 | . . . . . . . . | Combination operable only [2015-04] |
Y10T 70/5261 | . . . . . . . . | Key operable only [2015-04] |
Y10T 70/5265 | . . . . . . . | Sliding and rotary [2015-04] |
Y10T 70/527 | . . . . . . . | Sliding [2015-04] |
Y10T 70/5274 | . . . . . . . . | Combination operable only [2015-04] |
Y10T 70/5279 | . . . . . . . . | Key operable only [2015-04] |
Y10T 70/5283 | . . . . . . . | Swinging [2015-04] |
Y10T 70/5288 | . . . . . . . . | Combination operable only [2015-04] |
Y10T 70/5292 | . . . . . . . . | Key operable only [2015-04] |
Y10T 70/5296 | . . . . . . | Single [2015-04] |
Y10T 70/5301 | . . . . . . . | Sliding and swinging [2015-04] |
Y10T 70/5305 | . . . . . . . . | Combination operable only [2015-04] |
Y10T 70/531 | . . . . . . . . | Key operable only [2015-04] |
Y10T 70/5314 | . . . . . . . | Sliding and rotary [2015-04] |
Y10T 70/5319 | . . . . . . . | Sliding [2015-04] |
Y10T 70/5323 | . . . . . . . . | Multidirectional displacement [2015-04] |
Y10T 70/5327 | . . . . . . . . | Keeper interlocking [2015-04] |
Y10T 70/5332 | . . . . . . . . | Curved [2015-04] |
Y10T 70/5336 | . . . . . . . . | Combination operable only [2015-04] |
Y10T 70/5341 | . . . . . . . . | Key operable only [2015-04] |
Y10T 70/5345 | . . . . . . . | Swinging [2015-04] |
Y10T 70/535 | . . . . . . . . | Keeper and housing interlocking [2015-04] |
Y10T 70/5354 | . . . . . . . . | With hooked end [2015-04] |
Y10T 70/5358 | . . . . . . . . | Combination operable only [2015-04] |
Y10T 70/5363 | . . . . . . . . | Key operable only [2015-04] |
Y10T 70/5367 | . . . . . . . | Screw [2015-04] |
Y10T 70/5372 | . . . . . | Locking latch bolts, biased [2015-04] |
Y10T 70/5376 | . . . . . . | Keeper interlocking [2015-04] |
Y10T 70/5381 | . . . . . . | Projectable beyond normal biased position [2015-04] |
Y10T 70/5385 | . . . . . . | Spring projected [2015-04] |
Y10T 70/5389 | . . . . . . . | Manually operable [2015-04] |
Y10T 70/5394 | . . . . . . . . | Directly acting dog for exterior, manual, bolt manipulator [2015-04] |
Y10T 70/5398 | . . . . . . . . . | Related dog for interior, manual, bolt manipulator [2015-04] |
Y10T 70/5403 | . . . . . . . . . | Dog having a dog [2015-04] |
Y10T 70/5407 | . . . . . . . . . | Related dogging means for latch-bolt [2015-04] |
Y10T 70/5412 | . . . . . . . . . | Dog and dog actuator always interconnected [2015-04] |
Y10T 70/5416 | . . . . . . . . . | Exterior manipulator declutched from bolt when dogged [2015-04] |
Y10T 70/542 | . . . . . . . . . | Manual dog-controller concentric with bolt manipulator [2015-04] |
Y10T 70/5425 | . . . . . . . . . . | Shiftable rollback serves as dog [2015-04] |
Y10T 70/5429 | . . . . . . . . . . | Additional dog-controller key actuated for dogging and undogging [2015-04] |
Y10T 70/5434 | . . . . . . . . . . | Dog-controller axially slidable and axially rotatable [2015-04] |
Y10T 70/5438 | . . . . . . . . . . | Dog-controller rotatable [2015-04] |
Y10T 70/5442 | . . . . . . . . . . | Key-actuated lock releases dog [2015-04] |
Y10T 70/5447 | . . . . . . . . . . . | Manual bolt-manipulator operation releases dog [2015-04] |
Y10T 70/5451 | . . . . . . . . . . | Manual bolt-manipulator operation releases dog [2015-04] |
Y10T 70/5456 | . . . . . . . . . | Interior manual bolt-manipulator serves as dog-controller [2015-04] |
Y10T 70/546 | . . . . . . . . . . | For both dogging and undogging [2015-04] |
Y10T 70/5465 | . . . . . . . . . | Manual dog-controller [2015-04] |
Y10T 70/5469 | . . . . . . . . . . | With additional lock actuated dog-controller [2015-04] |
Y10T 70/5473 | . . . . . . . . . . . | Additional dog-controller controls both dogging and undogging [2015-04] |
Y10T 70/5478 | . . . . . . . . . . | Accessible at door edge [2015-04] |
Y10T 70/5482 | . . . . . . . . . . | Slidable only [2015-04] |
Y10T 70/5487 | . . . . . . . . . | Manual bolt-manipulator is slidable only [2015-04] |
Y10T 70/5491 | . . . . . . . . . | Manual bolt-manipulator is lever [2015-04] |
Y10T 70/5496 | . . . . . . . . | Freely movable external manipulator [2015-04] |
Y10T 70/55 | . . . . . . . . | Dogged bolt or connections [2015-04] |
Y10T 70/5504 | . . . . . . . . . | Automatic [2015-04] |
Y10T 70/5509 | . . . . . . . . . . | Snub bolt [2015-04] |
Y10T 70/5513 | . . . . . . . . . | By manipulator [2015-04] |
Y10T 70/5518 | . . . . . . . . . | Connections only [2015-04] |
Y10T 70/5522 | . . . . . . | Gravity projected [2015-04] |
Y10T 70/5527 | . . . . . . . | Projecting mechanism is lock controlled [2015-04] |
Y10T 70/5531 | . . . . . . | Combination and/or key operable [2015-04] |
Y10T 70/5535 | . . . . . . . | Trip release [2015-04] |
Y10T 70/554 | . . . | Cover, lid, cap, encasing shield [2015-04] |
Y10T 70/5544 | . . . . | Pivoted [2015-04] |
Y10T 70/5549 | . . . . . | Cover-carried lock [2015-04] |
Y10T 70/5553 | . . . . . . | Dead bolt [2015-04] |
Y10T 70/5558 | . . . . . . | Latching bolt [2015-04] |
Y10T 70/5562 | . . . . | Removable [2015-04] |
Y10T 70/5566 | . . . . . | External locking devices [2015-04] |
Y10T 70/5571 | . . . . . | Freely movable when locked [2015-04] |
Y10T 70/5575 | . . . . . | Directly seating [2015-04] |
Y10T 70/558 | . . . . . . | Cover-carried lock [2015-04] |
Y10T 70/5584 | . . . . . . . | Dead bolt [2015-04] |
Y10T 70/5589 | . . . . . . . | Latching bolt [2015-04] |
Y10T 70/5593 | . . . . . | Movably seating [2015-04] |
Y10T 70/5597 | . . . . . . | Cover-carried lock [2015-04] |
Y10T 70/5602 | . . . . . . . | Dead bolt [2015-04] |
Y10T 70/5606 | . . . . . . . | Latching bolt [2015-04] |
Y10T 70/5611 | . . | For control and machine elements [2015-04] |
Y10T 70/5615 | . . . | Valve [2015-04] |
Y10T 70/5619 | . . . . | Locked stationary [2015-04] |
Y10T 70/5624 | . . . . . | Externally mounted locking device [2015-04] |
Y10T 70/5628 | . . . . . . | Valve encasing [2015-04] |
Y10T 70/5633 | . . . . . | Housing-carried lock [2015-04] |
Y10T 70/5637 | . . . . . | With padlock [2015-04] |
Y10T 70/5642 | . . . | Rod [2015-04] |
Y10T 70/5646 | . . . | Rotary shaft [2015-04] |
Y10T 70/565 | . . . . | Locked stationary [2015-04] |
Y10T 70/5655 | . . . . . | Housing-carried lock [2015-04] |
Y10T 70/5659 | . . . . . . | Dead bolt [2015-04] |
Y10T 70/5664 | . . . . . . | Latching bolt [2015-04] |
Y10T 70/5668 | . . . . . | Shaft-carried lock [2015-04] |
Y10T 70/5673 | . . . . | Freely movable when locked [2015-04] |
Y10T 70/5677 | . . . . . | Shaft-carried clutch [2015-04] |
Y10T 70/5681 | . . . | Gear [2015-04] |
Y10T 70/5686 | . . . . | Planetary [2015-04] |
Y10T 70/569 | . . . | Lever [2015-04] |
Y10T 70/5695 | . . . . | Guide [2015-04] |
Y10T 70/5699 | . . . . . | Quadrant [2015-04] |
Y10T 70/5704 | . . . . . . | Lever-carried lock [2015-04] |
Y10T 70/5708 | . . . . . | Fixed lever-receiving keeper [2015-04] |
Y10T 70/5712 | . . . . . . | Lever-carried lock [2015-04] |
Y10T 70/5717 | . . . . | Multiple [2015-04] |
Y10T 70/5721 | . . . . . | Externally mounted locking device [2015-04] |
Y10T 70/5726 | . . . . . . | With padlock [2015-04] |
Y10T 70/573 | . . . . | Single [2015-04] |
Y10T 70/5735 | . . . . . | Externally mounted locking device [2015-04] |
Y10T 70/5739 | . . . . . . | With padlock [2015-04] |
Y10T 70/5743 | . . . . . | Disconnectable [2015-04] |
Y10T 70/5748 | . . . . . | Foldable [2015-04] |
Y10T 70/5752 | . . . . . | Universal mounting [2015-04] |
Y10T 70/5757 | . . . | Handle, handwheel or knob [2015-04] |
Y10T 70/5761 | . . . . | Retractable or flush handle [2015-04] |
Y10T 70/5765 | . . . . | Rotary or swinging [2015-04] |
Y10T 70/577 | . . . . . | Locked stationary [2015-04] |
Y10T 70/5774 | . . . . . . | Externally mounted locking device [2015-04] |
Y10T 70/5779 | . . . . . . . | With padlock [2015-04] |
Y10T 70/5783 | . . . . . . | Combination lock [2015-04] |
Y10T 70/5788 | . . . . . . . | Push pin or button [2015-04] |
Y10T 70/5792 | . . . . . . | Handle-carried key lock [2015-04] |
Y10T 70/5796 | . . . . . . . | Coaxially mounted [2015-04] |
Y10T 70/5801 | . . . . . . . . | Axially movable bolt [2015-04] |
Y10T 70/5805 | . . . . . | Freely movable when locked [2015-04] |
Y10T 70/581 | . . . . . . | Combination lock [2015-04] |
Y10T 70/5814 | . . . . . . . | Push pin or button [2015-04] |
Y10T 70/5819 | . . . . . . | Handle-carried key lock [2015-04] |
Y10T 70/5823 | . . . . . . . | Coaxial clutch connection [2015-04] |
Y10T 70/5827 | . . . . . . . . | Axially movable clutch [2015-04] |
Y10T 70/5832 | . . . . | Lock and handle assembly [2015-04] |
Y10T 70/5836 | . . . | Wheel [2015-04] |
Y10T 70/5841 | . . . . | Rotation blocking [2015-04] |
Y10T 70/5845 | . . . . . | Spoke gap traversing type [2015-04] |
Y10T 70/585 | . . . . . | Brake type [2015-04] |
Y10T 70/5854 | . . . | Bolt, nut, stud, stud-cap [2015-04] |
Y10T 70/5858 | . . . . | Locked stationary [2015-04] |
Y10T 70/5863 | . . . . | Freely movable when locked [2015-04] |
Y10T 70/5867 | . . . . | Encased [2015-04] |
Y10T 70/5872 | . . | For cycles [2015-04] |
Y10T 70/5876 | . . . | Anchors [2015-04] |
Y10T 70/5881 | . . . | Stands [2015-04] |
Y10T 70/5885 | . . . | Drive [2015-04] |
Y10T 70/5889 | . . | For automotive vehicles [2015-04] |
Y10T 70/5894 | . . . | Plural point [2015-04] |
Y10T 70/5898 | . . . . | With switch [2015-04] |
Y10T 70/5903 | . . . | Hood [2015-04] |
Y10T 70/5907 | . . . . | With switch [2015-04] |
Y10T 70/5912 | . . . | Fuel valve [2015-04] |
Y10T 70/5916 | . . . . | With switch [2015-04] |
Y10T 70/592 | . . . . | Cap combined [2015-04] |
Y10T 70/5925 | . . . | Transmission [2015-04] |
Y10T 70/5929 | . . . . | Cover combined [2015-04] |
Y10T 70/5934 | . . . . | Selective-type shift rod, fork or block [2015-04] |
Y10T 70/5938 | . . . . . | With switch [2015-04] |
Y10T 70/5942 | . . . . | Planetary type [2015-04] |
Y10T 70/5947 | . . . . . | With switch [2015-04] |
Y10T 70/5951 | . . . . | With switch [2015-04] |
Y10T 70/5956 | . . . | Steering mechanism with switch [2015-04] |
Y10T 70/596 | . . . | Pilot wheel control or linkage [2015-04] |
Y10T 70/5965 | . . . | Control levers with switch [2015-04] |
Y10T 70/5969 | . . . | Other element with switch [2015-04] |
Y10T 70/5973 | . . . | Remote control [2015-04] |
Y10T 70/5978 | . . . . | With switch [2015-04] |
Y10T 70/5982 | . . . | Accessories [2015-04] |
Y10T 70/5987 | . . . . | Spare or mounted wheel or tire [2015-04] |
Y10T 70/5991 | . . . . . | Tire or rim only [2015-04] |
Y10T 70/5996 | . . | For seats [2015-04] |
Y10T 70/60 | . | Systems [2015-04] |
Y10T 70/625 | . . | Operation and control [2015-04] |
Y10T 70/65 | . . . | Central control [2015-04] |
Y10T 70/675 | . . . | Serially operable [2015-04] |
Y10T 70/70 | . | Operating mechanism [2015-04] |
Y10T 70/7006 | . . | Predetermined time interval controlled [2015-04] |
Y10T 70/7011 | . . . | Positively initiated delay interval [2015-04] |
Y10T 70/7017 | . . . . | Interval terminating [2015-04] |
Y10T 70/7023 | . . . . | Repeating interval [2015-04] |
Y10T 70/7028 | . . . | Electric [2015-04] |
Y10T 70/7034 | . . . | Clockwork control [2015-04] |
Y10T 70/704 | . . . . | Continuously operating once initiated [2015-04] |
Y10T 70/7045 | . . . . . | Emergency release [2015-04] |
Y10T 70/7051 | . . | Using a powered device [e.g., motor] [2015-04] |
Y10T 70/7057 | . . . | Permanent magnet [2015-04] |
Y10T 70/7062 | . . . | Electrical type [e.g., solenoid] [2015-04] |
Y10T 70/7068 | . . . . | Actuated after correct combination recognized [e.g., numerical, alphabetical, or magnet[s] pattern] [2015-04] |
Y10T 70/7073 | . . . . . | Including use of a key [2015-04] |
Y10T 70/7079 | . . . . . . | Key rotated [e.g., Eurocylinder] [2015-04] |
Y10T 70/7085 | . . . . . | Using a dial having indicia or pointer and indicia [2015-04] |
Y10T 70/709 | . . . . . . | Plural interdependent or plural independently operable tumbler sets [2015-04] |
Y10T 70/7096 | . . . . . . | With mechanism having rocker arm or linked bars [2015-04] |
Y10T 70/7102 | . . . . | And details of blocking system [e.g., linkage, latch, pawl, spring] [2015-04] |
Y10T 70/7107 | . . . . | And alternately mechanically actuated by a key, dial, etc. [2015-04] |
Y10T 70/7113 | . . . . | Projected and retracted electrically [2015-04] |
Y10T 70/7119 | . . . . | Projected electrically only [2015-04] |
Y10T 70/7124 | . . . . | Retracted electrically only [2015-04] |
Y10T 70/713 | . . . . | Dogging manual operator [2015-04] |
Y10T 70/7136 | . . . . | Key initiated actuation of device [2015-04] |
Y10T 70/7141 | . . | Combination and key [2015-04] |
Y10T 70/7147 | . . | Combination or key [2015-04] |
Y10T 70/7153 | . . | Combination [2015-04] |
Y10T 70/7158 | . . . | Individual blocking elements [2015-04] |
Y10T 70/7164 | . . . . | Selectively operable [2015-04] |
Y10T 70/7169 | . . . | Complex movement or puzzle type [2015-04] |
Y10T 70/7175 | . . . . | Labyrinthian passage [2015-04] |
Y10T 70/7181 | . . . | Tumbler type [2015-04] |
Y10T 70/7186 | . . . . | Plural interdependent sets [2015-04] |
Y10T 70/7192 | . . . . | Plural independently operable sets [2015-04] |
Y10T 70/7198 | . . . . | Single tumbler set [2015-04] |
Y10T 70/7203 | . . . . . | With ball or roller [2015-04] |
Y10T 70/7209 | . . . . . | Interset sliding tumblers [2015-04] |
Y10T 70/7215 | . . . . . | Individually set sliding tumblers [2015-04] |
Y10T 70/722 | . . . . . . | Manually operable [2015-04] |
Y10T 70/7226 | . . . . . . | Associated movable operator [2015-04] |
Y10T 70/7232 | . . . . . . . | Removable [2015-04] |
Y10T 70/7237 | . . . . . | Rotary or swinging tumblers [2015-04] |
Y10T 70/7243 | . . . . . . | Interset tumblers [2015-04] |
Y10T 70/7249 | . . . . . . . | Tumblers released [2015-04] |
Y10T 70/7254 | . . . . . . . . | Fence held spaced from tumblers [2015-04] |
Y10T 70/726 | . . . . . . | Individually set [2015-04] |
Y10T 70/7266 | . . . . . . . | Movable selector [2015-04] |
Y10T 70/7271 | . . . . . . . | Associated movable operator [2015-04] |
Y10T 70/7277 | . . . . . . . . | Removable [2015-04] |
Y10T 70/7282 | . . . . . . . . | Pin or rod and slot [2015-04] |
Y10T 70/7288 | . . . . . . . . | Spindle operator [2015-04] |
Y10T 70/7294 | . . . . . . . . . | Concentric spindles [2015-04] |
Y10T 70/7299 | . . . . . . . . . | Axially shiftable spindle [2015-04] |
Y10T 70/7305 | . . . . . . . | Manually operable [2015-04] |
Y10T 70/7311 | . . . | Step-by-step [2015-04] |
Y10T 70/7316 | . . . | Combination upsetting [2015-04] |
Y10T 70/7322 | . . . | Permutation [2015-04] |
Y10T 70/7328 | . . . . | Compound tumblers [2015-04] |
Y10T 70/7333 | . . . . . | With fastener or holder [2015-04] |
Y10T 70/7339 | . . . . . | Pin and socket [2015-04] |
Y10T 70/7345 | . . . . | Removable change element [2015-04] |
Y10T 70/735 | . . . | Operating elements [2015-04] |
Y10T 70/7356 | . . . . | Fences [2015-04] |
Y10T 70/7362 | . . . . . | Bolt or lock housing supported [2015-04] |
Y10T 70/7367 | . . . . | Tumbler structure and position [2015-04] |
Y10T 70/7373 | . . . . . | Nested [2015-04] |
Y10T 70/7379 | . . . . . | Variant diameter [2015-04] |
Y10T 70/7384 | . . . . . | Mounts [2015-04] |
Y10T 70/739 | . . . . . | Motion-restraining means [2015-04] |
Y10T 70/7395 | . . . . . . | Friction holder [2015-04] |
Y10T 70/7401 | . . . . | Spindles [2015-04] |
Y10T 70/7407 | . . . . | Operating indicators [2015-04] |
Y10T 70/7412 | . . . . . | Portable combination setting guide [2015-04] |
Y10T 70/7418 | . . . . . | Dials [2015-04] |
Y10T 70/7424 | . . . | Tampering prevention or attach defeating [2015-04] |
Y10T 70/7429 | . . . . | Resonance type [2015-04] |
Y10T 70/7435 | . . . . | Hidden or covered dial [2015-04] |
Y10T 70/7441 | . . | Key [2015-04] |
Y10T 70/7446 | . . . | Multiple keys [2015-04] |
Y10T 70/7452 | . . . . | Selective shutout type [2015-04] |
Y10T 70/7458 | . . . . | Interdependent [2015-04] |
Y10T 70/7463 | . . . . | Master- and change-key [2015-04] |
Y10T 70/7469 | . . . . . | Change-key shutout [2015-04] |
Y10T 70/7475 | . . . . . | Submaster- and change-key [2015-04] |
Y10T 70/748 | . . . . . . | Change-key shutout [2015-04] |
Y10T 70/7486 | . . . | Single key [2015-04] |
Y10T 70/7492 | . . . . | Tumblerless push or pull key [2015-04] |
Y10T 70/7497 | . . . . | Tumblerless warded [2015-04] |
Y10T 70/7503 | . . . . | Tumbler and ward type [2015-04] |
Y10T 70/7508 | . . . . | Tumbler type [2015-04] |
Y10T 70/7514 | . . . . . | Sliding and rotary or swinging tumblers [2015-04] |
Y10T 70/752 | . . . . . | Sliding tumblers [2015-04] |
Y10T 70/7525 | . . . . . . | Longitudinal [2015-04] |
Y10T 70/7531 | . . . . . . | Transverse [2015-04] |
Y10T 70/7537 | . . . . . | Rotary or swinging tumblers [2015-04] |
Y10T 70/7542 | . . . . . . | Single set [2015-04] |
Y10T 70/7548 | . . . . . . . | Directly key engaged [2015-04] |
Y10T 70/7554 | . . . . . | Cylinder type with auxiliary tumblers or wards [2015-04] |
Y10T 70/7559 | . . . . . | Cylinder type [2015-04] |
Y10T 70/7565 | . . . . . . | Plural tumbler sets [2015-04] |
Y10T 70/7571 | . . . . . . | Concentric tumblers [2015-04] |
Y10T 70/7576 | . . . . . . | Sliding and rotary plug [2015-04] |
Y10T 70/7582 | . . . . . . | Sliding plug [2015-04] |
Y10T 70/7588 | . . . . . . | Rotary plug [2015-04] |
Y10T 70/7593 | . . . . . . . | Sliding tumblers [2015-04] |
Y10T 70/7599 | . . . . . . . . | Transverse of plug [2015-04] |
Y10T 70/7605 | . . . . . . . . . | Pin tumblers [2015-04] |
Y10T 70/761 | . . . . . . . . . . | Rotatable pins [e.g., MEDECO lock] [2015-04] |
Y10T 70/7616 | . . . . . . . . . | Including sidebar [2015-04] |
Y10T 70/7621 | . . . . . . . . | Including sidebar [2015-04] |
Y10T 70/7627 | . . . . . . . | Rotary or swinging tumblers [2015-04] |
Y10T 70/7633 | . . . . . . . . | Transverse of plug [2015-04] |
Y10T 70/7638 | . . . . . . | Cylinder and plug assembly [2015-04] |
Y10T 70/7644 | . . . . . . . | Key- and tool-controlled [2015-04] |
Y10T 70/765 | . . . . . . . | Key only controlled [2015-04] |
Y10T 70/7655 | . . . . . . | Cylinder attaching or mounting means [2015-04] |
Y10T 70/7661 | . . . . . . | Detachable or removable cylinder [2015-04] |
Y10T 70/7667 | . . . . . . | Operating elements, parts and adjuncts [2015-04] |
Y10T 70/7672 | . . . . . . . | Cylinder [2015-04] |
Y10T 70/7678 | . . . . . . . . | Adjustable [2015-04] |
Y10T 70/7684 | . . . . . . . | Plug [2015-04] |
Y10T 70/7689 | . . . . . . . | Tumblers [2015-04] |
Y10T 70/7695 | . . . . . . . . | Plate [2015-04] |
Y10T 70/7701 | . . . . . . . . | Pin [2015-04] |
Y10T 70/7706 | . . . . . . . | Operating connections [2015-04] |
Y10T 70/7712 | . . . . . . . . | Rollbacks [2015-04] |
Y10T 70/7718 | . . . . . . . . | Intermediate [2015-04] |
Y10T 70/7723 | . . . . . . . | Cylinder rings [2015-04] |
Y10T 70/7729 | . . . | Permutation [2015-04] |
Y10T 70/7734 | . . . . | Automatically key set combinations [2015-04] |
Y10T 70/774 | . . . . | Adjustable tumblers [2015-04] |
Y10T 70/7746 | . . . . . | Removable change element [2015-04] |
Y10T 70/7751 | . . . | With ball or roller [2015-04] |
Y10T 70/7757 | . . . | Push or pull key operation [2015-04] |
Y10T 70/7763 | . . . | Key ejecting [2015-04] |
Y10T 70/7768 | . . . | Key-removal preventing [2015-04] |
Y10T 70/7774 | . . . | False or picking key trapping [2015-04] |
Y10T 70/778 | . . . | Operating elements [2015-04] |
Y10T 70/7785 | . . . . | Tumblers [2015-04] |
Y10T 70/7791 | . . . . | Keys [2015-04] |
Y10T 70/7797 | . . . . . | Picking [2015-04] |
Y10T 70/7802 | . . . . . | Multi-part structures [2015-04] |
Y10T 70/7808 | . . . . . . | With foldable shank or stem [2015-04] |
Y10T 70/7814 | . . . . . . | With extensible shank or stem [2015-04] |
Y10T 70/7819 | . . . . . . | With slidable bit portion [2015-04] |
Y10T 70/7825 | . . . . . . | With pivoted or swinging bit portion [2015-04] |
Y10T 70/7831 | . . . . . . | Nested second key [2015-04] |
Y10T 70/7836 | . . . . . | Plural shanks, stems or bit wings [2015-04] |
Y10T 70/7842 | . . . . . | Single shank or stem [2015-04] |
Y10T 70/7847 | . . . . . . | Round rigid [2015-04] |
Y10T 70/7853 | . . . . . . . | Tubular [2015-04] |
Y10T 70/7859 | . . . . . . | Flat rigid [2015-04] |
Y10T 70/7864 | . . . . . . . | Cylinder lock type [2015-04] |
Y10T 70/787 | . . . . . . | Irregular nonplanar or undulated [2015-04] |
Y10T 70/7876 | . . . . . | Bow or head [2015-04] |
Y10T 70/7881 | . . . . . | Bitting [2015-04] |
Y10T 70/7887 | . . . . . . | Frangible [2015-04] |
Y10T 70/7893 | . . . . . . | Permutation [2015-04] |
Y10T 70/7898 | . . . . . . | Threaded [2015-04] |
Y10T 70/7904 | . . . . . | Magnetic features [2015-04] |
Y10T 70/791 | . . . . . | Ejecting feature [2015-04] |
Y10T 70/7915 | . . . | Tampering prevention or attack defeating [2015-04] |
Y10T 70/7921 | . . . . | Armoring [2015-04] |
Y10T 70/7927 | . . . . | Anti-jimmy [2015-04] |
Y10T 70/7932 | . . . . | Anti-pick [2015-04] |
Y10T 70/7938 | . . . . . | Guard ward [2015-04] |
Y10T 70/7944 | . . . . . | Guard tumbler [2015-04] |
Y10T 70/7949 | . . . . | Yielding or frangible connections [2015-04] |
Y10T 70/7955 | . . . . | Keyhole guards [2015-04] |
Y10T 70/796 | . . . . . | Portable [2015-04] |
Y10T 70/7966 | . . . . . | Combination-controlled [2015-04] |
Y10T 70/7972 | . . . . . . | Portable [2015-04] |
Y10T 70/7977 | . . . . . | Key-controlled [2015-04] |
Y10T 70/7983 | . . . . . . | Portable [2015-04] |
Y10T 70/7989 | . . . . | Key securers, fasteners or retainers [2015-04] |
Y10T 70/7994 | . . . . . | Portable [2015-04] |
Y10T 70/80 | . | Parts, attachments, accessories and adjuncts [2015-04] |
Y10T 70/8027 | . . | Condition indicators [2015-04] |
Y10T 70/8054 | . . . | With recorder [2015-04] |
Y10T 70/8081 | . . . . | Electric [2015-04] |
Y10T 70/8108 | . . . . | Padlock [2015-04] |
Y10T 70/8135 | . . . | With register [2015-04] |
Y10T 70/8162 | . . . . | Padlock [2015-04] |
Y10T 70/8189 | . . . | Contactual feeler [2015-04] |
Y10T 70/8216 | . . . | Tampering detector [2015-04] |
Y10T 70/8243 | . . . . | With seal [2015-04] |
Y10T 70/827 | . . . | Attention-directing [2015-04] |
Y10T 70/8297 | . . | For combination-operated mechanism [2015-04] |
Y10T 70/8324 | . . . | Housings [2015-04] |
Y10T 70/8351 | . . . | Operating attachments [2015-04] |
Y10T 70/8378 | . . . | Knobs, hand grips, etc. [2015-04] |
Y10T 70/8405 | . . . | Combination finders [2015-04] |
Y10T 70/8432 | . . | For key-operated mechanism [2015-04] |
Y10T 70/8459 | . . . | Housings [2015-04] |
Y10T 70/8486 | . . . . | Cylindrical [2015-04] |
Y10T 70/8514 | . . . . | Face plate [2015-04] |
Y10T 70/8541 | . . . . | Mounting arrangements [2015-04] |
Y10T 70/8568 | . . . | Escutcheons [2015-04] |
Y10T 70/8595 | . . . | Key guides, internal [2015-04] |
Y10T 70/8622 | . . . | Key insertion guides [2015-04] |
Y10T 70/8649 | . . . | Keyhole covers [2015-04] |
Y10T 70/8676 | . . . | Key holders [2015-04] |
Y10T 70/8703 | . . . . | Flexible [2015-04] |
Y10T 70/873 | . . . . | One-piece [2015-04] |
Y10T 70/8757 | . . . . | Releasable catches [2015-04] |
Y10T 70/8784 | . . . . | Parallel key loops, coaxially mounted, individually movable [2015-04] |
Y10T 70/8811 | . . . | Key identification [2015-04] |
Y10T 70/8838 | . . | Adjustment provisions [2015-04] |
Y10T 70/8865 | . . | Reversible structures [2015-04] |
Y10T 70/8892 | . . | Silencers or mufflers [2015-04] |
Y10T 70/8919 | . . | Antifriction provisions [2015-04] |
Y10T 70/8946 | . . | Emergency unlocking or release arrangements [2015-04] |
Y10T 70/8973 | . . | Mounting aids, guides and assistors [2015-04] |
Former US Class 74 Series [2015-01] |
Y10T 74/00 | Machine element or mechanism [2015-01] |
Y10T 74/10 | . | High frequency vibratory devices [2015-01] |
Y10T 74/11 | . | Tripping mechanism [2015-01] |
Y10T 74/111 | . . | Speed controlled [2015-01] |
Y10T 74/113 | . . . | Valve gear trips [e.g., steam engine "Corliss" type] [2015-01] |
Y10T 74/114 | . . | Retarded [2015-01] |
Y10T 74/115 | . . . | Plural, sequential, trip actuations [2015-01] |
Y10T 74/116 | . . . | Clock train [2015-01] |
Y10T 74/118 | . . . . | Winding knob trip [e.g., alarm mechanism] [2015-01] |
Y10T 74/119 | . . | Hit and miss [2015-01] |
Y10T 74/12 | . | Gyroscopes [2015-01] |
Y10T 74/1204 | . . | with caging or parking means [2015-01] |
Y10T 74/1207 | . . . | Rotor spin and cage release type [2015-01] |
Y10T 74/1211 | . . . | and resetting means [2015-01] |
Y10T 74/1214 | . . | with gimbal lock preventing means [2015-01] |
Y10T 74/1218 | . . | Combined [2015-01] |
Y10T 74/1221 | . . | Multiple gyroscopes [2015-01] |
Y10T 74/1225 | . . . | with rotor drives [2015-01] |
Y10T 74/1229 | . . | Gyroscope control [2015-01] |
Y10T 74/1232 | . . . | Erecting [2015-01] |
Y10T 74/1236 | . . . . | by plural diverse forces [2015-01] |
Y10T 74/1239 | . . . . | by jet [2015-01] |
Y10T 74/1243 | . . . . | by weight [2015-01] |
Y10T 74/1246 | . . . . | by friction [2015-01] |
Y10T 74/125 | . . . . | by magnetic field [2015-01] |
Y10T 74/1254 | . . . . | by motor torque [2015-01] |
Y10T 74/1257 | . . . | Damping [2015-01] |
Y10T 74/1261 | . . | with pick off [2015-01] |
Y10T 74/1264 | . . . | Optical [2015-01] |
Y10T 74/1268 | . . . | Pneumatic [2015-01] |
Y10T 74/1271 | . . . | Conducting liquid [2015-01] |
Y10T 74/1275 | . . . | Electrical [2015-01] |
Y10T 74/1279 | . . . | Electrical and magnetic [2015-01] |
Y10T 74/1282 | . . | with rotor drive [2015-01] |
Y10T 74/1286 | . . | Vertical gyroscopes [2015-01] |
Y10T 74/1289 | . . | Horizontal gyroscopes [2015-01] |
Y10T 74/1293 | . . | Flexure hinges for gyros [2015-01] |
Y10T 74/1296 | . . | Flywheel structure [2015-01] |
Y10T 74/13 | . | Machine starters [2015-01] |
Y10T 74/131 | . . | Automatic [2015-01] |
Y10T 74/132 | . . . | Separate power mesher [2015-01] |
Y10T 74/133 | . . . | Holders [2015-01] |
Y10T 74/134 | . . . | Clutch connection [2015-01] |
Y10T 74/136 | . . . | Worm and wheel [2015-01] |
Y10T 74/137 | . . . | Reduction gearing [2015-01] |
Y10T 74/138 | . . | Radial meshing [2015-01] |
Y10T 74/139 | . . | Cam operated [2015-01] |
Y10T 74/14 | . | Rotary member or shaft indexing, e.g., tool or work turret [2015-01] |
Y10T 74/1406 | . . | with safety device or drive disconnect [2015-01] |
Y10T 74/1412 | . . | with locating point adjusting [2015-01] |
Y10T 74/1418 | . . | Preselected indexed position [2015-01] |
Y10T 74/1424 | . . . | Sequential [2015-01] |
Y10T 74/1429 | . . . . | Skip position [2015-01] |
Y10T 74/1435 | . . . . | Held by torque [2015-01] |
Y10T 74/1441 | . . . . | Geneva or mutilated gear drive [2015-01] |
Y10T 74/1447 | . . . . | Velocity control [2015-01] |
Y10T 74/1453 | . . . . | Interlocked rotator and brake [2015-01] |
Y10T 74/1459 | . . . . . | Diverse-type brakes [2015-01] |
Y10T 74/1465 | . . . . . . | with axially acting friction brake [2015-01] |
Y10T 74/1471 | . . | Plural operators or input drives [2015-01] |
Y10T 74/1476 | . . | with means to axially shift shaft [2015-01] |
Y10T 74/1482 | . . | Single revolution input effects desired fractional output [2015-01] |
Y10T 74/1488 | . . | Control means [2015-01] |
Y10T 74/1494 | . . | Locking means [2015-01] |
Y10T 74/15 | . | Intermittent grip type mechanical movement [2015-01] |
Y10T 74/1502 | . . | Escapement [2015-01] |
Y10T 74/1503 | . . | Rotary to intermittent unidirectional motion [2015-01] |
Y10T 74/1505 | . . . | Automatically controlled [2015-01] |
Y10T 74/1506 | . . . . | Speed [2015-01] |
Y10T 74/1508 | . . . | Rotary crank or eccentric drive [2015-01] |
Y10T 74/151 | . . . . | Adjustable [2015-01] |
Y10T 74/1511 | . . . . | Lever transmitter [2015-01] |
Y10T 74/1513 | . . . . . | Adjustable leverage [2015-01] |
Y10T 74/1515 | . . . . | Rack and pinion transmitter [2015-01] |
Y10T 74/1516 | . . . . . | Adjustable throw [2015-01] |
Y10T 74/1518 | . . . . | Rotary cam drive [2015-01] |
Y10T 74/1519 | . . . . . | Adjustable throw [2015-01] |
Y10T 74/1521 | . . . . . . | Radial cam [2015-01] |
Y10T 74/1523 | . . . . . | Radial cam [2015-01] |
Y10T 74/1524 | . . . | Intermittently engaged clutch [2015-01] |
Y10T 74/1526 | . . | Oscillation or reciprocation to intermittent unidirectional motion [2015-01] |
Y10T 74/1527 | . . . | Screw and nut devices [2015-01] |
Y10T 74/1529 | . . . | Slide actuator [2015-01] |
Y10T 74/1531 | . . . . | Multiple acting [2015-01] |
Y10T 74/1532 | . . . | Rack actuator [2015-01] |
Y10T 74/1534 | . . . . | Multiple acting [2015-01] |
Y10T 74/1535 | . . . . . | Inwardly facing racks [2015-01] |
Y10T 74/1537 | . . . . | Oscillating [2015-01] |
Y10T 74/1539 | . . . . . | Multiple acting [2015-01] |
Y10T 74/154 | . . . . . . | Inwardly facing racks [2015-01] |
Y10T 74/1542 | . . . | Strap actuator [2015-01] |
Y10T 74/1544 | . . . . | Multiple acting [2015-01] |
Y10T 74/1545 | . . . . . | Spring or weight return [2015-01] |
Y10T 74/1547 | . . . . | Single acting [2015-01] |
Y10T 74/1548 | . . . . . | Engine starter type [2015-01] |
Y10T 74/155 | . . . . . . | Spring or weight return [2015-01] |
Y10T 74/1552 | . . . . . | Spring or weight return [2015-01] |
Y10T 74/1553 | . . . | Lever actuator [2015-01] |
Y10T 74/1555 | . . . . | Rotary driven element [2015-01] |
Y10T 74/1556 | . . . . . | Multiple acting [2015-01] |
Y10T 74/1558 | . . | Grip units and features [2015-01] |
Y10T 74/156 | . . . | Compound movement handle [2015-01] |
Y10T 74/1561 | . . . . | Reversible [2015-01] |
Y10T 74/1563 | . . . . | Transverse pivots [2015-01] |
Y10T 74/1565 | . . . | Gripper releasing devices [2015-01] |
Y10T 74/1566 | . . . . | Power pawl lifter [2015-01] |
Y10T 74/1568 | . . . . . | Automatic [2015-01] |
Y10T 74/1569 | . . . . . . | Idle stroke [2015-01] |
Y10T 74/1571 | . . . . . . . | Cooperating holding pawl [2015-01] |
Y10T 74/1573 | . . . . . . | Power stroke [2015-01] |
Y10T 74/1574 | . . . . . | Cooperating holding pawl [2015-01] |
Y10T 74/1576 | . . . . | Holding pawl lifter [2015-01] |
Y10T 74/1577 | . . . | Gripper mountings, lever [2015-01] |
Y10T 74/1579 | . . . . | Reversible [2015-01] |
Y10T 74/1581 | . . . . | Multiple acting [2015-01] |
Y10T 74/1582 | . . . . . | Single ratchet or clutch [2015-01] |
Y10T 74/1584 | . . . | Gripper mountings, slide [2015-01] |
Y10T 74/1585 | . . . . | Multiple acting [2015-01] |
Y10T 74/1587 | . . . | Grip features [2015-01] |
Y10T 74/1589 | . . . . | Driving band [2015-01] |
Y10T 74/159 | . . . . . | Clamping [2015-01] |
Y10T 74/1592 | . . . . | Driven band and gripper [2015-01] |
Y10T 74/1594 | . . . . . | Positive grip [2015-01] |
Y10T 74/1595 | . . . . | Driving ratchet-bar or rack [2015-01] |
Y10T 74/1597 | . . . . . | Multiple acting [2015-01] |
Y10T 74/1598 | . . . . | Driven ratchet-bar and power dog [2015-01] |
Y10T 74/16 | . | Alternating-motion driven device with means during operation to adjust stroke [2015-01] |
Y10T 74/1608 | . . | Constant length stroke with means to displace end limits [2015-01] |
Y10T 74/1616 | . . . | Cyclical displacement responsive to the alternating-motion [2015-01] |
Y10T 74/1625 | . . | Stroke adjustable to zero and/or reversible in phasing [2015-01] |
Y10T 74/1633 | . . . | Plural driving means to jointly drive the driven device [2015-01] |
Y10T 74/1642 | . . . | Device driven from selected points on oscillating link [2015-01] |
Y10T 74/165 | . . . | Driving lever with adjustable pivot point [2015-01] |
Y10T 74/1658 | . . . | Eccentric and strap drive, shiftable eccentric [2015-01] |
Y10T 74/1667 | . . . . | Changing the extent of eccentricity [2015-01] |
Y10T 74/1675 | . . . | Crank pin drive, shiftable pin [2015-01] |
Y10T 74/1683 | . . . | Cam and follower drive [2015-01] |
Y10T 74/1692 | . . . . | Axial-type cam [e.g., wabbler type] [2015-01] |
Y10T 74/17 | . | Rotary driven device adjustable during operation relative to its supporting structure [2015-01] |
Y10T 74/173 | . . | Screw and nut adjusting means [2015-01] |
Y10T 74/177 | . . | Rack and pinion adjusting means [2015-01] |
Y10T 74/18 | . | Mechanical movements [2015-01] |
Y10T 74/18008 | . . | Oscillating to reciprocating and alternating rotary [2015-01] |
Y10T 74/18016 | . . | Oscillating to reciprocating and intermittent rotary [2015-01] |
Y10T 74/18024 | . . | Rotary to reciprocating and rotary [2015-01] |
Y10T 74/18032 | . . . | Rotary to reciprocating or rotary [2015-01] |
Y10T 74/1804 | . . | Rotary to reciprocating and alternating rotary [2015-01] |
Y10T 74/18048 | . . | Rotary to reciprocating and intermittent rotary [2015-01] |
Y10T 74/18056 | . . | Rotary to or from reciprocating or oscillating [2015-01] |
Y10T 74/18064 | . . . | Head motions [2015-01] |
Y10T 74/18072 | . . . | Reciprocating carriage motions [2015-01] |
Y10T 74/1808 | . . . . | Phonograph type [2015-01] |
Y10T 74/18088 | . . . | Rack and pinion type [2015-01] |
Y10T 74/18096 | . . . . | Shifting rack [2015-01] |
Y10T 74/18104 | . . . . | Shiftable pinion [2015-01] |
Y10T 74/18112 | . . . . | Segmental pinion [2015-01] |
Y10T 74/1812 | . . . . | Alternately rotated pinion [2015-01] |
Y10T 74/18128 | . . . . | Clutchable gears [2015-01] |
Y10T 74/18136 | . . . . . | Bevel [2015-01] |
Y10T 74/18144 | . . . | Overcoming dead center [2015-01] |
Y10T 74/18152 | . . . | Belt or chain carried member [2015-01] |
Y10T 74/1816 | . . . | Crank, lever, toggle, and slide [2015-01] |
Y10T 74/18168 | . . . | Crank, lazy-tong, and slide [2015-01] |
Y10T 74/18176 | . . . | Crank, pitman, lever, and slide [2015-01] |
Y10T 74/18182 | . . . . | Pump jack type [2015-01] |
Y10T 74/18184 | . . . | Crank, pitman, and lever [2015-01] |
Y10T 74/182 | . . . . | Multiple levers [2015-01] |
Y10T 74/18208 | . . . | Crank, pitman, and slide [2015-01] |
Y10T 74/18216 | . . . | Crank, lever, and slide [2015-01] |
Y10T 74/18224 | . . . . | Rack connections [2015-01] |
Y10T 74/18232 | . . . | Crank and lever [2015-01] |
Y10T 74/1824 | . . . . | Slidable connections [2015-01] |
Y10T 74/18248 | . . . | Crank and slide [2015-01] |
Y10T 74/18256 | . . . . | Slidable connections [e.g., scotch yoke] [2015-01] |
Y10T 74/18264 | . . . | Crank and multiple pitmans [2015-01] |
Y10T 74/18272 | . . . | Planetary gearing and slide [2015-01] |
Y10T 74/1828 | . . . | Cam, lever, and slide [2015-01] |
Y10T 74/18288 | . . . | Cam and lever [2015-01] |
Y10T 74/18296 | . . . | Cam and slide [2015-01] |
Y10T 74/18304 | . . . . | Axial cam [2015-01] |
Y10T 74/18312 | . . . . . | Grooved [2015-01] |
Y10T 74/1832 | . . . . . . | Multiple screw [2015-01] |
Y10T 74/18328 | . . . . . . | Alternately rotated screw [2015-01] |
Y10T 74/18336 | . . . . | Wabbler type [2015-01] |
Y10T 74/18344 | . . . | Unbalanced weights [2015-01] |
Y10T 74/18352 | . . . | Trammel-pitman [2015-01] |
Y10T 74/1836 | . . | Rotary to rotary [2015-01] |
Y10T 74/18368 | . . . | Inertia or centrifugal transmitters [2015-01] |
Y10T 74/18376 | . . . | Crank, pitman, lever, and crank [2015-01] |
Y10T 74/18384 | . . . | Crank, lever, and crank [2015-01] |
Y10T 74/18392 | . . . | Crank, pitman, and crank [2015-01] |
Y10T 74/184 | . . . | Cranks, link connected [2015-01] |
Y10T 74/18408 | . . . | Cranks, slidable connections [2015-01] |
Y10T 74/18416 | . . | Rotary to alternating rotary [2015-01] |
Y10T 74/18424 | . . . | Mangle connections [2015-01] |
Y10T 74/18432 | . . . . | Shiftable driven gear [2015-01] |
Y10T 74/1844 | . . . . . | Central teeth [2015-01] |
Y10T 74/18448 | . . . . | Mutilated gearing connections [2015-01] |
Y10T 74/18456 | . . . | Crank, pitman, and lever [2015-01] |
Y10T 74/18464 | . . . | Reciprocating rack connections [2015-01] |
Y10T 74/18472 | . . . . | Crank and pitman actuator [2015-01] |
Y10T 74/1848 | . . . . | Simple crank actuator [2015-01] |
Y10T 74/18488 | . . . | Oscillating rack connections [2015-01] |
Y10T 74/18496 | . . . . | Mangle actuated [2015-01] |
Y10T 74/18504 | . . . . | Crank and pitman actuator [2015-01] |
Y10T 74/18512 | . . . | Flexible connector type [2015-01] |
Y10T 74/1852 | . . . | Associated inertia devices [2015-01] |
Y10T 74/18528 | . . | Rotary to intermittent unidirectional motion [2015-01] |
Y10T 74/18536 | . . . | Space machines [2015-01] |
Y10T 74/18544 | . . | Rotary to gyratory [2015-01] |
Y10T 74/18552 | . . . | Unbalanced weight [2015-01] |
Y10T 74/1856 | . . | Reciprocating or oscillating to intermittent unidirectional motion [2015-01] |
Y10T 74/18568 | . . | Reciprocating or oscillating to or from alternating rotary [2015-01] |
Y10T 74/18576 | . . . | including screw and nut [2015-01] |
Y10T 74/18584 | . . . . | Shaft shorter than nut [2015-01] |
Y10T 74/18592 | . . . . | Auxiliary drive [e.g., fluid piston, etc.] for load [2015-01] |
Y10T 74/186 | . . . . | Alternate power path operable on failure of primary [2015-01] |
Y10T 74/18608 | . . . . | Single input split into two intermediate outputs that are subsequently superposed into a single output [2015-01] |
Y10T 74/18616 | . . . . | Single input, plural outputs [2015-01] |
Y10T 74/18624 | . . . . | Plural inputs, single output [2015-01] |
Y10T 74/18632 | . . . . . | Plural nuts driving shaft [2015-01] |
Y10T 74/1864 | . . . . . | Shaft and nut driven [2015-01] |
Y10T 74/18648 | . . . . | Carriage surrounding, guided by, and primarily supported by member other than screw [e.g., linear guide, etc.] [2015-01] |
Y10T 74/18656 | . . . . | Carriage surrounded, guided, and primarily supported by member other than screw [e.g., linear guide, etc.] [2015-01] |
Y10T 74/18664 | . . . . | Shaft moves through rotary drive means [2015-01] |
Y10T 74/18672 | . . . . | Plural screws in series [e.g., telescoping, etc.] [2015-01] |
Y10T 74/1868 | . . . . | Deflection related [2015-01] |
Y10T 74/18688 | . . . . | Limit stop [2015-01] |
Y10T 74/18696 | . . . . | including means to selectively transmit power [e.g., clutch, etc.] [2015-01] |
Y10T 74/18704 | . . . . | Means to selectively lock or retard screw or nut [2015-01] |
Y10T 74/18712 | . . . . | Contamination related [2015-01] |
Y10T 74/1872 | . . . . . | Imperforate enclosure [2015-01] |
Y10T 74/18728 | . . . . | Backlash [2015-01] |
Y10T 74/18736 | . . . . | Pressurized fluid introduced between nut and screw [2015-01] |
Y10T 74/18744 | . . . . | Lubrication [2015-01] |
Y10T 74/18752 | . . . . | Manually driven [2015-01] |
Y10T 74/1876 | . . . | including inertia device [2015-01] |
Y10T 74/18768 | . . . . | with rack and pinion [2015-01] |
Y10T 74/18776 | . . . . . | Rectilinear rack [2015-01] |
Y10T 74/18784 | . . . | including bevel gears [2015-01] |
Y10T 74/18792 | . . . | including worm [2015-01] |
Y10T 74/188 | . . . | including spur gear [2015-01] |
Y10T 74/18808 | . . . . | with rack [2015-01] |
Y10T 74/18816 | . . . . . | Curvilinear rack [2015-01] |
Y10T 74/18824 | . . . . . . | with biasing means [2015-01] |
Y10T 74/18832 | . . . | including flexible drive connector [e.g., belt, chain, strand, etc.] [2015-01] |
Y10T 74/1884 | . . . . | with sprocket wheel [2015-01] |
Y10T 74/18848 | . . . . | with pulley [2015-01] |
Y10T 74/18856 | . . | Oscillating to oscillating [2015-01] |
Y10T 74/18864 | . . . | Snap action [2015-01] |
Y10T 74/18872 | . . . . | Plate spring [2015-01] |
Y10T 74/1888 | . . . | Geared connections [2015-01] |
Y10T 74/18888 | . . | Reciprocating to or from oscillating [2015-01] |
Y10T 74/18896 | . . . | Snap action [2015-01] |
Y10T 74/18904 | . . . . | Plate spring [2015-01] |
Y10T 74/18912 | . . . | Compound lever and slide [2015-01] |
Y10T 74/1892 | . . . | Lever and slide [2015-01] |
Y10T 74/18928 | . . . . | Straight line motions [2015-01] |
Y10T 74/18936 | . . . . | Slidable connections [2015-01] |
Y10T 74/18944 | . . . . | Link connections [2015-01] |
Y10T 74/18952 | . . . . | toggle transmissions [2015-01] |
Y10T 74/1896 | . . . . | Cam connections [2015-01] |
Y10T 74/18968 | . . . . | Flexible connections [2015-01] |
Y10T 74/18976 | . . . | Rack and pinion [2015-01] |
Y10T 74/18984 | . . . | Inclined ramp [2015-01] |
Y10T 74/18992 | . . | Reciprocating to reciprocating [2015-01] |
Y10T 74/19 | . | Gearing [2015-01] |
Y10T 74/19005 | . . | Nonplanetary gearing differential type [e.g., gearless differentials] [2015-01] |
Y10T 74/19009 | . . | Single gearing unit includes fluid drive [2015-01] |
Y10T 74/19014 | . . | Plural prime movers selectively coupled to common output [2015-01] |
Y10T 74/19019 | . . | Plural power paths from prime mover [2015-01] |
Y10T 74/19023 | . . | Plural power paths to and/or from gearing [2015-01] |
Y10T 74/19028 | . . . | Alternate input connections single hand crank [2015-01] |
Y10T 74/19033 | . . . | Fluid drive divides or combines alternate paths [2015-01] |
Y10T 74/19037 | . . . | One path includes fluid drive [2015-01] |
Y10T 74/19042 | . . . | Friction-type gearing [2015-01] |
Y10T 74/19047 | . . . | Worm-type gearing [2015-01] |
Y10T 74/19051 | . . . | Single driven plural drives [2015-01] |
Y10T 74/19056 | . . . . | Parallel [2015-01] |
Y10T 74/1906 | . . . . | Nonparallel [2015-01] |
Y10T 74/19065 | . . . . | Aligned [2015-01] |
Y10T 74/1907 | . . . . | Parallel and aligned [2015-01] |
Y10T 74/19074 | . . . | Single drive plural driven [2015-01] |
Y10T 74/19079 | . . . . | Parallel [2015-01] |
Y10T 74/19084 | . . . . . | Spur [2015-01] |
Y10T 74/19088 | . . . . . | Bevel [2015-01] |
Y10T 74/19093 | . . . . . | Spur and bevel [2015-01] |
Y10T 74/19098 | . . . . . | Helical [2015-01] |
Y10T 74/19102 | . . . . . | Belt or chain [2015-01] |
Y10T 74/19107 | . . . . | Nonparallel [2015-01] |
Y10T 74/19112 | . . . . | Aligned [2015-01] |
Y10T 74/19116 | . . . . . | Vehicle [2015-01] |
Y10T 74/19121 | . . . . | Concentric [2015-01] |
Y10T 74/19126 | . . . | Plural drivers plural driven [2015-01] |
Y10T 74/1913 | . . . . | Bevel [2015-01] |
Y10T 74/19135 | . . . . | Spur [2015-01] |
Y10T 74/1914 | . . . | Alternate drivers and driven [2015-01] |
Y10T 74/19144 | . . . | Miscellaneous [plural power paths] [2015-01] |
Y10T 74/19149 | . . | with fluid drive [2015-01] |
Y10T 74/19153 | . . . | Condition responsive control [2015-01] |
Y10T 74/19158 | . . . | with one or more controllers for gearing, fluid drive, or clutch [2015-01] |
Y10T 74/19163 | . . . . | with interrelated controls [2015-01] |
Y10T 74/19167 | . . | In series plural interchangeably locked nonplanetary units [2015-01] |
Y10T 74/19172 | . . | Reversal of direction of power flow changes power transmission to alternate path [2015-01] |
Y10T 74/19177 | . . . | Input and output exchange functions [2015-01] |
Y10T 74/19181 | . . | toothed gear and recirculated unconnected elements [2015-01] |
Y10T 74/19186 | . . | Alternating rotary or continuous [2015-01] |
Y10T 74/19191 | . . | Alternating rotary [2015-01] |
Y10T 74/19195 | . . . | Progressive [2015-01] |
Y10T 74/192 | . . . | Shiftable and/or slidable gears [2015-01] |
Y10T 74/19205 | . . . | Clutchable gears [2015-01] |
Y10T 74/1921 | . . . . | On single driven member [2015-01] |
Y10T 74/19214 | . . . . | On single driving member [2015-01] |
Y10T 74/19219 | . . | Interchangeably locked [2015-01] |
Y10T 74/19223 | . . . | Disconnectable counter shaft [2015-01] |
Y10T 74/19228 | . . . | Multiple concentric clutch shafts [2015-01] |
Y10T 74/19233 | . . . | Plurality of counter shafts [2015-01] |
Y10T 74/19237 | . . . | Internal-external gears [2015-01] |
Y10T 74/19242 | . . . | Combined gear and clutch [2015-01] |
Y10T 74/19247 | . . . . | Preselector [2015-01] |
Y10T 74/19251 | . . . | Control mechanism [2015-01] |
Y10T 74/19256 | . . . . | Automatic [2015-01] |
Y10T 74/1926 | . . . . . | Speed responsive [2015-01] |
Y10T 74/19265 | . . . . . . | Governor [2015-01] |
Y10T 74/1927 | . . . . . . | with belt gearing [2015-01] |
Y10T 74/19274 | . . . . . | torque responsive [2015-01] |
Y10T 74/19279 | . . . . | Cam operated [2015-01] |
Y10T 74/19284 | . . . | Meshing assisters [2015-01] |
Y10T 74/19288 | . . . . | Double clutch and interposed transmission [2015-01] |
Y10T 74/19293 | . . . | Longitudinally slidable [2015-01] |
Y10T 74/19298 | . . . . | Multiple spur gears [2015-01] |
Y10T 74/19302 | . . . . . | with tumbler gear [2015-01] |
Y10T 74/19307 | . . . . . | Selective [2015-01] |
Y10T 74/19312 | . . . . . . | Direct clutch and drive [2015-01] |
Y10T 74/19316 | . . . . . | Progressive [2015-01] |
Y10T 74/19321 | . . . . . . | Direct clutch and drive [2015-01] |
Y10T 74/19326 | . . . . . | Fluid operated [2015-01] |
Y10T 74/1933 | . . . . | Multiple bevel gears [2015-01] |
Y10T 74/19335 | . . . . | Single spur gear [2015-01] |
Y10T 74/1934 | . . . . . | Tumbler and cone [2015-01] |
Y10T 74/19344 | . . . . . . | Multiple cone [2015-01] |
Y10T 74/19349 | . . . . | Single bevel gear [2015-01] |
Y10T 74/19353 | . . . . | Pin or crown gears [2015-01] |
Y10T 74/19358 | . . . | Laterally slidable gears [2015-01] |
Y10T 74/19363 | . . . . | Rotary carriage [2015-01] |
Y10T 74/19367 | . . . . | Swinging carriage [2015-01] |
Y10T 74/19372 | . . . | Single forward and reverse speeds [2015-01] |
Y10T 74/19377 | . . . | Slidable keys or clutches [2015-01] |
Y10T 74/19381 | . . . . | Alternative clutch shaft [2015-01] |
Y10T 74/19386 | . . . . | Multiple clutch shafts [2015-01] |
Y10T 74/19391 | . . . . . | Progressive [2015-01] |
Y10T 74/19395 | . . . . . . | Keys simultaneously slidable [2015-01] |
Y10T 74/194 | . . . . . | Selective [2015-01] |
Y10T 74/19405 | . . . . . | Multiple forward and reverse [2015-01] |
Y10T 74/19409 | . . . . . | Single forward and reverse [2015-01] |
Y10T 74/19414 | . . . . | Single clutch shaft [2015-01] |
Y10T 74/19419 | . . . . . | Progressive [2015-01] |
Y10T 74/19423 | . . . . . . | Multiple key [2015-01] |
Y10T 74/19428 | . . . . . . . | Spur [2015-01] |
Y10T 74/19433 | . . . . . . . . | Fluid operated [2015-01] |
Y10T 74/19437 | . . . . . . . . | Electrically operated [2015-01] |
Y10T 74/19442 | . . . . . . | Single key [2015-01] |
Y10T 74/19447 | . . . . . . . | Clutch and ratchet [2015-01] |
Y10T 74/19451 | . . . . . . . | Spur gears [2015-01] |
Y10T 74/19456 | . . . . . . . . | Intermediate clutch [2015-01] |
Y10T 74/1946 | . . . . . . . . | Sliding clutch carrier [2015-01] |
Y10T 74/19465 | . . . . . . . . | Sliding clutch operator [2015-01] |
Y10T 74/1947 | . . . . . | Selective [2015-01] |
Y10T 74/19474 | . . . . . . | Multiple key [2015-01] |
Y10T 74/19479 | . . . . . . . | Spur gears [2015-01] |
Y10T 74/19484 | . . . . . | Single speed forward and reverse [2015-01] |
Y10T 74/19488 | . . . . . . | Spur gears [2015-01] |
Y10T 74/19493 | . . . . . . | Bevel gears [2015-01] |
Y10T 74/19498 | . . . . . . | Bevel and idler gears [2015-01] |
Y10T 74/19502 | . . | Pivotally supported [2015-01] |
Y10T 74/19507 | . . . | Windmill turntable [2015-01] |
Y10T 74/19512 | . . . | Screw [2015-01] |
Y10T 74/19516 | . . . | Spur [2015-01] |
Y10T 74/19521 | . . . | Bevel [2015-01] |
Y10T 74/19526 | . . . . | Wheel type [2015-01] |
Y10T 74/1953 | . . . . | Wringer type [2015-01] |
Y10T 74/19535 | . . | Follow-up mechanism [2015-01] |
Y10T 74/1954 | . . | Eccentric driving shaft and axle [2015-01] |
Y10T 74/19545 | . . | Central driving shaft in axle [2015-01] |
Y10T 74/1955 | . . | Parallel shafts, adjustable gear mesh [2015-01] |
Y10T 74/19555 | . . | Varying speed ratio [2015-01] |
Y10T 74/1956 | . . | Adjustable [2015-01] |
Y10T 74/19565 | . . . | Relative movable axes [2015-01] |
Y10T 74/1957 | . . . . | Parallel shafts [2015-01] |
Y10T 74/19575 | . . . . | Automatic control [2015-01] |
Y10T 74/1958 | . . . . . | Parallel shafts [2015-01] |
Y10T 74/19585 | . . . | Fixed axes [2015-01] |
Y10T 74/1959 | . . . . | Parallel shafts [2015-01] |
Y10T 74/19595 | . . . . | Automatic control [2015-01] |
Y10T 74/196 | . . . . . | Parallel shafts [2015-01] |
Y10T 74/19605 | . . | Reversing means [2015-01] |
Y10T 74/19609 | . . . | Governor control [2015-01] |
Y10T 74/19614 | . . | Disconnecting means [2015-01] |
Y10T 74/19619 | . . | Displaceable elements [2015-01] |
Y10T 74/19623 | . . | Backlash take-up [2015-01] |
Y10T 74/19628 | . . | Pressure distributing [2015-01] |
Y10T 74/19633 | . . | Yieldability in gear trains [2015-01] |
Y10T 74/19637 | . . | with brake means for gearing [2015-01] |
Y10T 74/19642 | . . | Directly cooperating gears [2015-01] |
Y10T 74/19647 | . . . | Parallel axes or shafts [2015-01] |
Y10T 74/19651 | . . . . | External type [2015-01] |
Y10T 74/19656 | . . . . . | Pin teeth [2015-01] |
Y10T 74/1966 | . . . | Intersecting axes [2015-01] |
Y10T 74/19665 | . . . . | Bevel gear type [2015-01] |
Y10T 74/1967 | . . . | Rack and pinion [2015-01] |
Y10T 74/19674 | . . . | Spur and bevel [2015-01] |
Y10T 74/19679 | . . . | Spur [2015-01] |
Y10T 74/19684 | . . . . | Motor and gearing [2015-01] |
Y10T 74/19688 | . . . | Bevel [2015-01] |
Y10T 74/19693 | . . . . | Motor vehicle drive [2015-01] |
Y10T 74/19698 | . . . | Spiral [2015-01] |
Y10T 74/19702 | . . . . | Screw and nut [2015-01] |
Y10T 74/19707 | . . . . . | Plural longitudinally variably spaced nuts [2015-01] |
Y10T 74/19712 | . . . . . | Threadless [2015-01] |
Y10T 74/19716 | . . . . . | Non-linear screw [2015-01] |
Y10T 74/19721 | . . . . . | Thread geometry [2015-01] |
Y10T 74/19726 | . . . . . . | Thread pitch varies over axial length [2015-01] |
Y10T 74/1973 | . . . . . . | Shaft thread is spirally wound wire [2015-01] |
Y10T 74/19735 | . . . . . | Nut disengageable from screw [2015-01] |
Y10T 74/1974 | . . . . . . | Nut segments hinged parallel to shaft [e.g., clam shell-type, etc.] [2015-01] |
Y10T 74/19744 | . . . . . | Rolling element engaging thread [2015-01] |
Y10T 74/19749 | . . . . . . | Recirculating rolling elements [2015-01] |
Y10T 74/19753 | . . . . . . . | Plural independent recirculating element paths [2015-01] |
Y10T 74/19758 | . . . . . . . | Single thread common to plural paths [2015-01] |
Y10T 74/19763 | . . . . . . . | Roller return path in shaft [2015-01] |
Y10T 74/19767 | . . . . . . . | Return path geometry [2015-01] |
Y10T 74/19772 | . . . . . . . . | Rolling element deflector [2015-01] |
Y10T 74/19777 | . . . . . . . | Interconnected or cooperating rollers or roller structure [2015-01] |
Y10T 74/19781 | . . . . . . | Non-recirculating rolling elements [2015-01] |
Y10T 74/19786 | . . . . . . . | Captured sphere [2015-01] |
Y10T 74/19791 | . . . . . . . | Cylindrical or quasi-cylindrical roller element [e.g., inclined roller, etc.] [2015-01] |
Y10T 74/19795 | . . . . . . . . | Parallel to shaft [2015-01] |
Y10T 74/198 | . . . . . . . . | Perpendicular to shaft [2015-01] |
Y10T 74/19805 | . . . . . | Less than 360 degrees of contact between nut and screw [2015-01] |
Y10T 74/19809 | . . . . . . | Independent nut segments [2015-01] |
Y10T 74/19814 | . . . . . . . | Integral deformable tangs engaging screw [2015-01] |
Y10T 74/19819 | . . . . | Driven rack or shaft [2015-01] |
Y10T 74/19823 | . . . . | Screw [2015-01] |
Y10T 74/19828 | . . . . | Worm [2015-01] |
Y10T 74/19833 | . . . . . | Variable speed [2015-01] |
Y10T 74/19837 | . . . . . | Intermittent motion [2015-01] |
Y10T 74/19842 | . . . . . | Distribution of pressure [2015-01] |
Y10T 74/19847 | . . . | torque actuated safety devices [2015-01] |
Y10T 74/19851 | . . | Gear and rotary bodies [2015-01] |
Y10T 74/19856 | . . . | Laterally-spaced wheels [2015-01] |
Y10T 74/1986 | . . . | Radially-spaced wheels [2015-01] |
Y10T 74/19865 | . . . | with flywheel [2015-01] |
Y10T 74/1987 | . . | Rotary bodies [2015-01] |
Y10T 74/19874 | . . . | Mutilated [2015-01] |
Y10T 74/19879 | . . . | Geneva [2015-01] |
Y10T 74/19884 | . . . | Irregular teeth and bodies [2015-01] |
Y10T 74/19888 | . . . | External and internal teeth [2015-01] |
Y10T 74/19893 | . . . | Sectional [2015-01] |
Y10T 74/19898 | . . . . | Backlash take-up [2015-01] |
Y10T 74/19902 | . . . . . | Screw and nut [2015-01] |
Y10T 74/19907 | . . . . | Sound deadening [2015-01] |
Y10T 74/19912 | . . . . | Differential disks [2015-01] |
Y10T 74/19916 | . . . . | Multiple disks [2015-01] |
Y10T 74/19921 | . . . . | Separate rim [2015-01] |
Y10T 74/19926 | . . . . . | Detachable [2015-01] |
Y10T 74/1993 | . . . . | Segmental rim [2015-01] |
Y10T 74/19935 | . . . . | Sheet metal [2015-01] |
Y10T 74/1994 | . . . . | Diametrically split [2015-01] |
Y10T 74/19944 | . . . . | Shaft-admitting insert [2015-01] |
Y10T 74/19949 | . . | Teeth [2015-01] |
Y10T 74/19953 | . . . | Worm and helical [2015-01] |
Y10T 74/19958 | . . . | Bevel [2015-01] |
Y10T 74/19963 | . . . | Spur [2015-01] |
Y10T 74/19967 | . . . . | Yieldable [2015-01] |
Y10T 74/19972 | . . . . | form [2015-01] |
Y10T 74/19977 | . . . . . | Antifriction [2015-01] |
Y10T 74/19981 | . . . . . . | Roller [2015-01] |
Y10T 74/19986 | . . . . . | Twisted [2015-01] |
Y10T 74/19991 | . . | Lubrication [2015-01] |
Y10T 74/19995 | . . . | Teeth [2015-01] |
Y10T 74/20 | . | Control lever and linkage systems [2015-01] |
Y10T 74/20006 | . . | Resilient connections [2015-01] |
Y10T 74/20012 | . . | Multiple controlled elements [2015-01] |
Y10T 74/20018 | . . . | Transmission control [2015-01] |
Y10T 74/20024 | . . . . | Fluid actuator [2015-01] |
Y10T 74/2003 | . . . . | Electrical actuator [2015-01] |
Y10T 74/20037 | . . . . | Occupant propelled vehicle [2015-01] |
Y10T 74/20043 | . . . . . | Transmission controlled by flexible cable [2015-01] |
Y10T 74/20049 | . . . . | Transmission controlled by flexible cable [2015-01] |
Y10T 74/20055 | . . . . | Foot operated [2015-01] |
Y10T 74/20061 | . . . . . | Multiple foot-operated controls [2015-01] |
Y10T 74/20067 | . . . . | Control convertible between automatic and manual operation [2015-01] |
Y10T 74/20073 | . . . . | Control of plural mechanisms [e.g., control of transmission and control of 4 - wheel drive] [2015-01] |
Y10T 74/20079 | . . . . . | Separate control levers [2015-01] |
Y10T 74/20085 | . . . . | Restriction of shift, gear selection, or gear engagement [2015-01] |
Y10T 74/20091 | . . . . . | Prevention of reverse shift [2015-01] |
Y10T 74/20098 | . . . . . | Separate actuator to disengage restrictor [2015-01] |
Y10T 74/20104 | . . . . . | Shift element interlock [2015-01] |
Y10T 74/2011 | . . . . . . | with detent, recess, notch, or groove [2015-01] |
Y10T 74/20116 | . . . . . . | Resiliently biased interlock [2015-01] |
Y10T 74/20122 | . . . . . | Spherical restrictor [2015-01] |
Y10T 74/20128 | . . . . . | Resiliently biased restrictor [2015-01] |
Y10T 74/20134 | . . . . | having vibration damper [2015-01] |
Y10T 74/2014 | . . . . | Manually operated selector [e.g., remotely controlled device, lever, push button, rotary dial, etc.] [2015-01] |
Y10T 74/20146 | . . . . . | Control lever on steering column [2015-01] |
Y10T 74/20152 | . . . . . . | Control lever movable through plural planes [2015-01] |
Y10T 74/20159 | . . . . . | Control lever movable through plural planes [2015-01] |
Y10T 74/20165 | . . . . . . | Spherical mount [e.g., ball and socket] [2015-01] |
Y10T 74/20171 | . . . . . . . | Resiliently biased control lever [2015-01] |
Y10T 74/20177 | . . . . | Particular element [e.g., shift fork, template, etc.] [2015-01] |
Y10T 74/20183 | . . . . . | Shift fork structure [2015-01] |
Y10T 74/20189 | . . . | Foot operated [2015-01] |
Y10T 74/20195 | . . . . | Offset extension [2015-01] |
Y10T 74/20201 | . . . | Control moves in two planes [2015-01] |
Y10T 74/20207 | . . | Multiple controlling elements for single controlled element [2015-01] |
Y10T 74/20213 | . . . | Interconnected [2015-01] |
Y10T 74/2022 | . . . . | Hand and foot [2015-01] |
Y10T 74/20226 | . . . . . | Accelerator [2015-01] |
Y10T 74/20232 | . . . . | Marine [2015-01] |
Y10T 74/20238 | . . . | Interlocked [2015-01] |
Y10T 74/20244 | . . . . | Push button [2015-01] |
Y10T 74/2025 | . . . . | Rod blocks actuation of rotary member [2015-01] |
Y10T 74/20256 | . . . | Steering and controls assemblies [2015-01] |
Y10T 74/20262 | . . . . | Rotary control shaft [2015-01] |
Y10T 74/20268 | . . . . | Reciprocating control elements [2015-01] |
Y10T 74/20274 | . . . . . | Flexible [2015-01] |
Y10T 74/2028 | . . . . . | Handle bar type [2015-01] |
Y10T 74/20287 | . . . . . . | Flexible control element [2015-01] |
Y10T 74/20293 | . . . . | with horn control [2015-01] |
Y10T 74/20299 | . . . | Antirattling elements [2015-01] |
Y10T 74/20305 | . . . | Robotic arm [2015-01] |
Y10T 74/20311 | . . . . | including power cable or connector [2015-01] |
Y10T 74/20317 | . . . . | including electric motor [2015-01] |
Y10T 74/20323 | . . . . | including flaccid drive element [2015-01] |
Y10T 74/20329 | . . . . | Joint between elements [2015-01] |
Y10T 74/20335 | . . . . . | Wrist [2015-01] |
Y10T 74/20341 | . . . | Power elements as controlling elements [2015-01] |
Y10T 74/20348 | . . . . | Planar surface with orthogonal movement and rotation [2015-01] |
Y10T 74/20354 | . . . . | Planar surface with orthogonal movement only [2015-01] |
Y10T 74/2036 | . . . . | Pair of power elements [2015-01] |
Y10T 74/20366 | . . . | Power and manual controlling elements [2015-01] |
Y10T 74/20372 | . . . | Manual controlling elements [2015-01] |
Y10T 74/20378 | . . . . | Planar surface with orthogonal movement or rotation [2015-01] |
Y10T 74/20384 | . . . . | Levers [2015-01] |
Y10T 74/2039 | . . . . . | Pair of levers [2015-01] |
Y10T 74/20396 | . . | Hand operated [2015-01] |
Y10T 74/20402 | . . . | Flexible transmitter [e.g., Bowden cable] [2015-01] |
Y10T 74/20408 | . . . . | Constant tension sustaining [2015-01] |
Y10T 74/20414 | . . . . . | Hydraulic control [2015-01] |
Y10T 74/2042 | . . . . | and hand operator [2015-01] |
Y10T 74/20426 | . . . . . | Slidable [2015-01] |
Y10T 74/20432 | . . . . . | for moving a mirror [2015-01] |
Y10T 74/20438 | . . . . . | Single rotatable lever [e.g., for bicycle brake or derailleur] [2015-01] |
Y10T 74/20444 | . . . . | including rolling antifriction elements [2015-01] |
Y10T 74/2045 | . . . . | and sheath support, connector, or anchor [2015-01] |
Y10T 74/20456 | . . . . | Specific cable or sheath structure [2015-01] |
Y10T 74/20462 | . . . . | Specific cable connector or guide [2015-01] |
Y10T 74/20468 | . . . | Sliding rod [2015-01] |
Y10T 74/20474 | . . . | Rotatable rod, shaft, or post [2015-01] |
Y10T 74/2048 | . . . . | Gear, drum, and cable [2015-01] |
Y10T 74/20486 | . . . . | Drum and cable [2015-01] |
Y10T 74/20492 | . . . . | Gear [2015-01] |
Y10T 74/20498 | . . . . . | Variable ratio [2015-01] |
Y10T 74/20504 | . . . . . | Screw and nut [2015-01] |
Y10T 74/2051 | . . . . | Adjustable [2015-01] |
Y10T 74/20516 | . . . . | Mountings [2015-01] |
Y10T 74/20522 | . . . . . | Antenna [2015-01] |
Y10T 74/20528 | . . | Foot operated [2015-01] |
Y10T 74/20534 | . . . | Accelerator [2015-01] |
Y10T 74/2054 | . . . | Signal [2015-01] |
Y10T 74/20546 | . . | Knee operated [2015-01] |
Y10T 74/20552 | . . . | Elbow [2015-01] |
Y10T 74/20558 | . . | Variable output force [2015-01] |
Y10T 74/20564 | . . . | Flexible [2015-01] |
Y10T 74/2057 | . . . | Variable input leverage [2015-01] |
Y10T 74/20576 | . . | Elements [2015-01] |
Y10T 74/20582 | . . . | Levers [2015-01] |
Y10T 74/20588 | . . . . | toggle [2015-01] |
Y10T 74/20594 | . . . . . | Lazy tongs [2015-01] |
Y10T 74/206 | . . . . | Adjustable [2015-01] |
Y10T 74/20606 | . . . . | Swing posts [2015-01] |
Y10T 74/20612 | . . . . | Hand [2015-01] |
Y10T 74/20618 | . . . . . | Jointed [2015-01] |
Y10T 74/20624 | . . . . . | Adjustable [2015-01] |
Y10T 74/2063 | . . . . | Stops [2015-01] |
Y10T 74/20636 | . . . | Detents [2015-01] |
Y10T 74/20642 | . . . . | Hand crank [2015-01] |
Y10T 74/20648 | . . . . | Interrelated lever release [2015-01] |
Y10T 74/20654 | . . . . | Gear [2015-01] |
Y10T 74/2066 | . . . . | Friction [2015-01] |
Y10T 74/20666 | . . . . | Lever engaging [2015-01] |
Y10T 74/20672 | . . . . | Lever engaging rack [2015-01] |
Y10T 74/20678 | . . . . . | Pivoted [2015-01] |
Y10T 74/20684 | . . . . . | Lever carried pawl [2015-01] |
Y10T 74/2069 | . . . . . | Handle release [2015-01] |
Y10T 74/20696 | . . . . . | Finger lever release [2015-01] |
Y10T 74/20702 | . . . . . . | Slidable [2015-01] |
Y10T 74/20708 | . . . . . | Pedal controlled [2015-01] |
Y10T 74/20714 | . . . . | Lever carried rack [2015-01] |
Y10T 74/2072 | . . . . . | Pivoted [2015-01] |
Y10T 74/20726 | . . . . . | Pedal controlled [2015-01] |
Y10T 74/20732 | . . . | Handles [2015-01] |
Y10T 74/20738 | . . . . | Extension [2015-01] |
Y10T 74/20744 | . . . . | Hand crank [2015-01] |
Y10T 74/2075 | . . . . . | Extensible [2015-01] |
Y10T 74/20756 | . . . . . | Collapsible [2015-01] |
Y10T 74/20762 | . . . . | Shaft connections [2015-01] |
Y10T 74/20768 | . . . . . | Engine starter type [2015-01] |
Y10T 74/20774 | . . . . . . | Holders [2015-01] |
Y10T 74/2078 | . . . . | Handle bars [2015-01] |
Y10T 74/20786 | . . . . . | Spring biased or supported [2015-01] |
Y10T 74/20792 | . . . . . | Folding or adjustable [2015-01] |
Y10T 74/20798 | . . . . . . | Sectional [2015-01] |
Y10T 74/20804 | . . . . . . . | Simultaneously movable [2015-01] |
Y10T 74/2081 | . . . . . . | Continuous [2015-01] |
Y10T 74/20816 | . . . . . . . | with handle latch [2015-01] |
Y10T 74/20822 | . . . . . | Attachments and accessories [2015-01] |
Y10T 74/20828 | . . . . . | Handholds and grips [2015-01] |
Y10T 74/20834 | . . . . | Hand wheels [2015-01] |
Y10T 74/2084 | . . . . . | Knob or dial [2015-01] |
Y10T 74/20846 | . . . . . | Slidable [2015-01] |
Y10T 74/20852 | . . . . . | Pivoted [2015-01] |
Y10T 74/20858 | . . . . . . | Releasable [2015-01] |
Y10T 74/20864 | . . . . . | Handles [2015-01] |
Y10T 74/2087 | . . . . . | Rim grips and covers [2015-01] |
Y10T 74/20876 | . . . . | Caps and covers [2015-01] |
Y10T 74/20882 | . . . | Rocker arms [2015-01] |
Y10T 74/20888 | . . . | Pedals [2015-01] |
Y10T 74/20894 | . . . . | Treadles [2015-01] |
Y10T 74/209 | . . . . | Extension [2015-01] |
Y10T 74/20906 | . . . . . | Offset [2015-01] |
Y10T 74/20912 | . . . . | Pads and covers [2015-01] |
Y10T 74/20918 | . . . | Foot rests [2015-01] |
Y10T 74/20924 | . . . | Controller checks [2015-01] |
Y10T 74/2093 | . . . | Slot closers and lever guards [2015-01] |
Y10T 74/21 | . | Elements [2015-01] |
Y10T 74/2101 | . . | Cams [2015-01] |
Y10T 74/2102 | . . . | Adjustable [2015-01] |
Y10T 74/2104 | . . . . | Flexible strip [2015-01] |
Y10T 74/2105 | . . . . | Memory devices [2015-01] |
Y10T 74/2106 | . . . . | Timer devices [2015-01] |
Y10T 74/2107 | . . . | Follower [2015-01] |
Y10T 74/2109 | . . | Balancing for drum, e.g., washing machine or arm-type structure, etc., centrifuge, etc. [2015-01] |
Y10T 74/211 | . . | Eccentric [2015-01] |
Y10T 74/2111 | . . . | Plural, movable relative to each other [including ball[s]] [2015-01] |
Y10T 74/2112 | . . . . | Concentric [2015-01] |
Y10T 74/2114 | . . . | Adjustable [2015-01] |
Y10T 74/2115 | . . . . | Radially [2015-01] |
Y10T 74/2116 | . . . | having anti-friction means, e.g., roller bearing, lubrication, etc. [2015-01] |
Y10T 74/2117 | . . | Power generating-type flywheel [2015-01] |
Y10T 74/2119 | . . . | Structural detail, e.g., material, configuration, superconductor, discs, laminated, etc. [2015-01] |
Y10T 74/212 | . . . . | Containing fiber or filament [2015-01] |
Y10T 74/2121 | . . | Flywheel, motion smoothing-type [2015-01] |
Y10T 74/2122 | . . . | with fluid balancing means [2015-01] |
Y10T 74/2123 | . . . . | and pressure compensation [2015-01] |
Y10T 74/2125 | . . . . | and elastic device [2015-01] |
Y10T 74/2126 | . . . . | and bearings [2015-01] |
Y10T 74/2127 | . . . | with electrical or magnetic damping [2015-01] |
Y10T 74/2128 | . . . | Damping using swinging masses, e.g., pendulum type, etc. [2015-01] |
Y10T 74/213 | . . . | Damping by increasing frictional force [2015-01] |
Y10T 74/2131 | . . . | Damping by absorbing vibration force [via rubber, elastomeric material, etc.] [2015-01] |
Y10T 74/2132 | . . . | Structural detail, e.g., fiber, held by magnet, etc. [2015-01] |
Y10T 74/2133 | . . | Pawls and ratchets [2015-01] |
Y10T 74/2135 | . . . | Noiseless [2015-01] |
Y10T 74/2136 | . . . | Pivoted pawls [2015-01] |
Y10T 74/2137 | . . . . | Single tooth [2015-01] |
Y10T 74/2138 | . . . . | Flexible single tooth [2015-01] |
Y10T 74/214 | . . . . | Multiple tooth [2015-01] |
Y10T 74/2141 | . . . | Sliding pawls [2015-01] |
Y10T 74/2142 | . . | Pitmans and connecting rods [2015-01] |
Y10T 74/2143 | . . . | Radial [2015-01] |
Y10T 74/2144 | . . . | Yieldable [2015-01] |
Y10T 74/2146 | . . . . | Longitudinal springs [2015-01] |
Y10T 74/2147 | . . . . | Fluid cushion [2015-01] |
Y10T 74/2148 | . . . . | Automatic release [2015-01] |
Y10T 74/2149 | . . . . . | toggle link type [2015-01] |
Y10T 74/2151 | . . . | Longitudinally adjustable [2015-01] |
Y10T 74/2152 | . . . | Hollow rod, lubricated [2015-01] |
Y10T 74/2153 | . . . | Sheet metal type [2015-01] |
Y10T 74/2154 | . . . | Counterbalanced [2015-01] |
Y10T 74/2156 | . . . . | Weight type [2015-01] |
Y10T 74/2157 | . . . . . | Rotating [2015-01] |
Y10T 74/2158 | . . . . | Spring [2015-01] |
Y10T 74/2159 | . . . | Section coupled [2015-01] |
Y10T 74/216 | . . . | Bearings, adjustable [2015-01] |
Y10T 74/2162 | . . . | Engine type [2015-01] |
Y10T 74/2163 | . . . | Idler arm [2015-01] |
Y10T 74/2164 | . . | Cranks and pedals [2015-01] |
Y10T 74/2165 | . . . | with attached gear [2015-01] |
Y10T 74/2167 | . . . | Variable [2015-01] |
Y10T 74/2168 | . . . | Pedals [2015-01] |
Y10T 74/2169 | . . . . | Counterbalanced [2015-01] |
Y10T 74/217 | . . . . | with toe or shoe clips [2015-01] |
Y10T 74/2172 | . . . . | Adjustable or folding [2015-01] |
Y10T 74/2173 | . . | Cranks and wrist pins [2015-01] |
Y10T 74/2174 | . . . | Multiple throw [2015-01] |
Y10T 74/2175 | . . . . | Sectional [2015-01] |
Y10T 74/2177 | . . . | Sectional [2015-01] |
Y10T 74/2178 | . . . | Yieldable [2015-01] |
Y10T 74/2179 | . . . | Adjustable [2015-01] |
Y10T 74/218 | . . . . | Automatically [2015-01] |
Y10T 74/2181 | . . . | Variable [2015-01] |
Y10T 74/2183 | . . . | Counterbalanced [2015-01] |
Y10T 74/2184 | . . . . | Vibration dampers [2015-01] |
Y10T 74/2185 | . . . | Lubricated [2015-01] |
Y10T 74/2186 | . . | Gear casings [2015-01] |
Y10T 74/2188 | . . . | Axle and torque tubes [2015-01] |
Y10T 74/2189 | . . . | Cooling [2015-01] |
Y10T 74/219 | . . | Guards [2015-01] |
Y10T 74/2191 | . . . | for rotary member [2015-01] |
Y10T 74/2193 | . . | Guard mechanisms [2015-01] |
Y10T 74/2194 | . . . | Automatic [2015-01] |
Y10T 74/2195 | . . . . | Oscillating member actuator [2015-01] |
Y10T 74/2196 | . . . . | Reciprocating member actuator [2015-01] |
Y10T 74/2198 | . . . | Operator controlled [2015-01] |
Y10T 74/2199 | . . . | Set screw [2015-01] |
Y10T 74/22 | . | Miscellaneous [2015-01] |
Former US Class 82 Series [2015-01] |
Y10T 82/00 | Turning [2015-01] |
Y10T 82/10 | . | Process of turning [2015-01] |
Y10T 82/11 | . | Talking machine tablet [2015-01] |
Y10T 82/12 | . | Radially moving rotating tool inside bore [2015-01] |
Y10T 82/122 | . . | Forming non-circular bore [2015-01] |
Y10T 82/125 | . . | Tool simultaneously moving axially [2015-01] |
Y10T 82/128 | . . . | Pivoted to tool-carrier [2015-01] |
Y10T 82/13 | . | Pattern section [2015-01] |
Y10T 82/135 | . . | Cam-controlled cutter [2015-01] |
Y10T 82/14 | . | Axial pattern [2015-01] |
Y10T 82/141 | . . | having transverse tool and templet guide [2015-01] |
Y10T 82/142 | . . . | with workpiece gauge [2015-01] |
Y10T 82/143 | . . . | having electrical actuator [2015-01] |
Y10T 82/145 | . . . . | And hydraulic actuator [2015-01] |
Y10T 82/147 | . . . | having hydraulic actuator [2015-01] |
Y10T 82/148 | . . | Pivoted tool rest [2015-01] |
Y10T 82/149 | . . | Profiled cutter [2015-01] |
Y10T 82/15 | . | Tapers [2015-01] |
Y10T 82/152 | . . | Offset work axis [2015-01] |
Y10T 82/154 | . . | Transversely shifted cutter [2015-01] |
Y10T 82/156 | . . . | Templet controlled [2015-01] |
Y10T 82/158 | . . . | Gear controlled [2015-01] |
Y10T 82/16 | . | Severing or cut-off [2015-01] |
Y10T 82/16016 | . . | Processes [2015-01] |
Y10T 82/16032 | . . | Automatic and/or triggered control [2015-01] |
Y10T 82/16049 | . . | Combined with means to sharpen tool[s] [2015-01] |
Y10T 82/16065 | . . | Combined with means to apply fluid [2015-01] |
Y10T 82/16081 | . . | Combined with means to heat tool and/or work [2015-01] |
Y10T 82/16098 | . . | with dust or chip handling [2015-01] |
Y10T 82/16114 | . . | including scrap cutting means [2015-01] |
Y10T 82/16131 | . . | Flying cutter type [2015-01] |
Y10T 82/16147 | . . | Cutting couple straddling work [2015-01] |
Y10T 82/16163 | . . . | with pattern, guide or cam means [noncircular product] [2015-01] |
Y10T 82/16181 | . . . | Plural cutting means [pairs, or pair, plus single] [2015-01] |
Y10T 82/16196 | . . . | Rotary shear pair [2015-01] |
Y10T 82/16213 | . . . . | Tool axes parallel to axis of work rotation [2015-01] |
Y10T 82/16229 | . . | Interrelated means for tool infeed and circumrotation [2015-01] |
Y10T 82/16245 | . . . | Dependent upon reaction to work [2015-01] |
Y10T 82/16262 | . . . | Infeed cam disk rotation geared to tool holder rotation [2015-01] |
Y10T 82/16278 | . . . . | Axial infeed cam [2015-01] |
Y10T 82/16295 | . . . . | including centrifugal balancing means [2015-01] |
Y10T 82/16311 | . . . . | Scroll plate infeed cam [2015-01] |
Y10T 82/16327 | . . . | Infeed cam plate braked with respect to tool[s] carrier plate [2015-01] |
Y10T 82/16344 | . . . | Orbital cogwheel and fixed detent [2015-01] |
Y10T 82/16361 | . . . | Common gear means [2015-01] |
Y10T 82/16377 | . . . . | including adjustable means to vary gear speed [2015-01] |
Y10T 82/16393 | . . . . | with manual disconnect lever [2015-01] |
Y10T 82/16409 | . . . | with means to feed work [2015-01] |
Y10T 82/16426 | . . | Infeed means [2015-01] |
Y10T 82/16442 | . . . | with means to circumrotate tool[s] about work [2015-01] |
Y10T 82/16459 | . . . . | Fluid means for relative tool actuation [2015-01] |
Y10T 82/16475 | . . . . | Gear means for tool actuation [2015-01] |
Y10T 82/16491 | . . . . . | including axial cam [2015-01] |
Y10T 82/16508 | . . . . . . | with indicator [2015-01] |
Y10T 82/16524 | . . . . | Bell crank linkage for tool[s] holder [2015-01] |
Y10T 82/16541 | . . . . | Resilient means for tool actuation [2015-01] |
Y10T 82/16557 | . . . . . | with means for manual retraction [2015-01] |
Y10T 82/16573 | . . . | Hand crank for tool holder [2015-01] |
Y10T 82/16591 | . . . | Power driven eccentric [2015-01] |
Y10T 82/16606 | . . . . | Fluid motor [2015-01] |
Y10T 82/16622 | . . . . | Plural tools [2015-01] |
Y10T 82/16639 | . . . | Tool within work [2015-01] |
Y10T 82/16655 | . . . | with means to rotate tool[s] [2015-01] |
Y10T 82/16672 | . . . . | including rotatable cutters supporting work [2015-01] |
Y10T 82/16688 | . . . . | Planetating work mandrels [2015-01] |
Y10T 82/16704 | . . . . | Pivoted tool carriage [2015-01] |
Y10T 82/16721 | . . . . . | with adjustable work stops [2015-01] |
Y10T 82/16737 | . . . . | Eccentric periphery rotary tool [2015-01] |
Y10T 82/16754 | . . . . | Means to feed work axially [2015-01] |
Y10T 82/16771 | . . . . | Translatable work support carriage [2015-01] |
Y10T 82/16786 | . . . . | with tool groove in support roll[s] [2015-01] |
Y10T 82/16803 | . . . | Rotatable tool[s] driven by contact with work [2015-01] |
Y10T 82/16819 | . . . . | Axially movable tool support [2015-01] |
Y10T 82/16836 | . . . . . | Freely floating parallel to axis [2015-01] |
Y10T 82/16852 | . . . . . . | with supplemental nonrotative tool [2015-01] |
Y10T 82/16868 | . . . . . | including clutch control for work rotation [2015-01] |
Y10T 82/16885 | . . . . | including resilient means urging work against rotary support [2015-01] |
Y10T 82/16901 | . . . | Separate means for plural tools [2015-01] |
Y10T 82/16918 | . . . | Spring urged [2015-01] |
Y10T 82/16934 | . . . . | For window shade [2015-01] |
Y10T 82/16951 | . . . | Tool adjustment and/or stop [2015-01] |
Y10T 82/16967 | . . . | with means to support and/or rotate work [2015-01] |
Y10T 82/16983 | . . . | with means to feed work [2015-01] |
Y10T 82/17 | . | Lathe for pulley [2015-01] |
Y10T 82/18 | . | Lathe for wheel or axle [2015-01] |
Y10T 82/185 | . . | In situ lathe for railroad wheel [2015-01] |
Y10T 82/19 | . | Lathe for crank or crank pin [2015-01] |
Y10T 82/192 | . . | Portable lathe for crank pin [2015-01] |
Y10T 82/195 | . . | having work oscillator [2015-01] |
Y10T 82/198 | . . . | having work driver [2015-01] |
Y10T 82/20 | . | Lathe for screw cutting [2015-01] |
Y10T 82/205 | . . | having swinging feed nut and tool bar [2015-01] |
Y10T 82/21 | . | Portable lathe for brake drum, disc, or shoe [2015-01] |
Y10T 82/22 | . | Portable lathe for pipe turning [2015-01] |
Y10T 82/23 | . | Portable lathe for piston grooving [2015-01] |
Y10T 82/24 | . | Bench lathe [2015-01] |
Y10T 82/245 | . . | Watchmaker's lathe [2015-01] |
Y10T 82/25 | . | Lathe [2015-01] |
Y10T 82/2502 | . . | with program control [2015-01] |
Y10T 82/2504 | . . . | And transmission [2015-01] |
Y10T 82/2506 | . . . | And tool turret [2015-01] |
Y10T 82/2508 | . . | with tool turret [2015-01] |
Y10T 82/2511 | . . | Vertical [2015-01] |
Y10T 82/2512 | . . | having facing tool fed transverse to work [2015-01] |
Y10T 82/2514 | . . | with work feeder or remover [2015-01] |
Y10T 82/2516 | . . . | Magazine type [2015-01] |
Y10T 82/2518 | . . . . | Bar feeder [2015-01] |
Y10T 82/2521 | . . . | Bar feeder [2015-01] |
Y10T 82/2522 | . . | Portable [2015-01] |
Y10T 82/2524 | . . | Multiple [2015-01] |
Y10T 82/2527 | . . | having hollow cutter head [2015-01] |
Y10T 82/2529 | . . | Revolvable cutter heads [2015-01] |
Y10T 82/2531 | . . | Carriage feed [2015-01] |
Y10T 82/2533 | . . . | Control [2015-01] |
Y10T 82/2535 | . . . . | Electrical type [2015-01] |
Y10T 82/2537 | . . . | Apron mechanism [2015-01] |
Y10T 82/2539 | . . . . | Feednut control [2015-01] |
Y10T 82/2541 | . . . | Slide rest [2015-01] |
Y10T 82/2543 | . . . . | Multiple tool support [2015-01] |
Y10T 82/2545 | . . . . | Tool relief [2015-01] |
Y10T 82/2547 | . . . | Change gears [2015-01] |
Y10T 82/2549 | . . . | Feedscrews and rods [2015-01] |
Y10T 82/2552 | . . | Headstock [2015-01] |
Y10T 82/2554 | . . . | Speed changing gear [2015-01] |
Y10T 82/2556 | . . . . | Speed change gears for maintaining constant cutting speed [2015-01] |
Y10T 82/2558 | . . . | Spindle reverser [2015-01] |
Y10T 82/2561 | . . . | Spindle or work angler [2015-01] |
Y10T 82/2562 | . . . | Spindle and bearings [2015-01] |
Y10T 82/2564 | . . | Tailstock [2015-01] |
Y10T 82/2566 | . . | Bed [2015-01] |
Y10T 82/2568 | . . | Center [2015-01] |
Y10T 82/2571 | . . . | Alignment adjuster [2015-01] |
Y10T 82/2572 | . . | Attachment [2015-01] |
Y10T 82/2574 | . . . | Stop [e.g., carriage, tool, work, etc.] [2015-01] |
Y10T 82/2577 | . . . . | Tool slide [2015-01] |
Y10T 82/2579 | . . . . | Collet or spindle [2015-01] |
Y10T 82/2581 | . . . . | Indexible [e.g., roll type, etc.] [2015-01] |
Y10T 82/2583 | . . | Tool and work rest [2015-01] |
Y10T 82/2585 | . . | Tool rest [2015-01] |
Y10T 82/2587 | . . . | Turret type holder [e.g., multiple tools, etc.] [2015-01] |
Y10T 82/2589 | . . . | Quick release tool or holder clamp [2015-01] |
Y10T 82/2591 | . . . | Tool post [2015-01] |
Y10T 82/2593 | . . | Work rest [2015-01] |
Y10T 82/2595 | . . . | with noise or vibration dampener [2015-01] |
Y10T 82/2597 | . . . | Center rest [2015-01] |
Y10T 82/26 | . | Work driver [2015-01] |
Y10T 82/262 | . . | Lathe dog [2015-01] |
Y10T 82/264 | . . . | Cam grip [2015-01] |
Y10T 82/266 | . . | Mandrel [2015-01] |
Y10T 82/268 | . . . | Expansible [2015-01] |
Y10T 82/27 | . | Centerer [2015-01] |
Y10T 82/28 | . | Drill press attachment for turning [2015-01] |
Y10T 82/29 | . | Attachment for cutting a valve [2015-01] |
Y10T 82/30 | . | Miscellaneous [2015-01] |
Former US Class 83 series [2015-04] |
Y10T 83/00 | Cutting [2015-04] |
Y10T 83/02 | . | Other than completely through work thickness [2015-04] |
Y10T 83/0207 | . . | or through work presented [2015-04] |
Y10T 83/0215 | . . . | Including use of rotary scoring blade [2015-04] |
Y10T 83/0222 | . . . . | Plural independent rotary scoring blades [2015-04] |
Y10T 83/023 | . . . | With infeeding of work [2015-04] |
Y10T 83/0237 | . . | Pricking [2015-04] |
Y10T 83/0244 | . . . | Including use of orbiting tool carrier [2015-04] |
Y10T 83/0252 | . . . | With infeeding of tool [2015-04] |
Y10T 83/0259 | . . | Edge trimming [e.g., chamfering, etc.] [2015-04] |
Y10T 83/0267 | . . | Splitting [2015-04] |
Y10T 83/0274 | . . . | By use of endless band or chain knife [2015-04] |
Y10T 83/0281 | . . . | By use of rotary blade [2015-04] |
Y10T 83/0289 | . . . . | Plural independent rotary blades [2015-04] |
Y10T 83/0296 | . . . | With infeeding of work [2015-04] |
Y10T 83/0304 | . . | Grooving [2015-04] |
Y10T 83/0311 | . . . | By use of plural independent rotary blades [2015-04] |
Y10T 83/0319 | . . . . | Forming common groove [2015-04] |
Y10T 83/0326 | . . . . | Blades turning about perpendicular axes [2015-04] |
Y10T 83/0333 | . . | Scoring [2015-04] |
Y10T 83/0341 | . . . | Processes [2015-04] |
Y10T 83/0348 | . . . | Active means to control depth of score [2015-04] |
Y10T 83/0356 | . . . | Serially [2015-04] |
Y10T 83/0363 | . . . | Plural independent scoring blades [2015-04] |
Y10T 83/037 | . . . . | Rotary scoring blades [2015-04] |
Y10T 83/0378 | . . . . . | On opposite sides of work [2015-04] |
Y10T 83/0385 | . . . | Rotary scoring blade [2015-04] |
Y10T 83/0393 | . . . . | With means to rotate blade [2015-04] |
Y10T 83/04 | . | Processes [2015-04] |
Y10T 83/0405 | . . | With preparatory or simultaneous ancillary treatment of work [2015-04] |
Y10T 83/041 | . . . | By heating or cooling [2015-04] |
Y10T 83/0414 | . . . . | At localized area [e.g., line of separation] [2015-04] |
Y10T 83/0419 | . . . | By distorting within elastic limit [2015-04] |
Y10T 83/0424 | . . . . | By stretching [2015-04] |
Y10T 83/0429 | . . . . | By compressing [2015-04] |
Y10T 83/0433 | . . . . | By flexing around or by tool [2015-04] |
Y10T 83/0438 | . . . . . | To conform to shape of tool [2015-04] |
Y10T 83/0443 | . . . | By fluid application [2015-04] |
Y10T 83/0448 | . . | With subsequent handling [i.e., of product] [2015-04] |
Y10T 83/0453 | . . . | By fluid application [2015-04] |
Y10T 83/0457 | . . . | By retaining or reinserting product in workpiece [2015-04] |
Y10T 83/0462 | . . . | By accelerating travel [2015-04] |
Y10T 83/0467 | . . . | By separating products from each other [2015-04] |
Y10T 83/0472 | . . . | By moving work support to which a tacky product is adhered [2015-04] |
Y10T 83/0476 | . . | Including stacking of plural workpieces [2015-04] |
Y10T 83/0481 | . . | Puncturing [2015-04] |
Y10T 83/0486 | . . | With manipulation of tool protective strip [e.g., backing strip] [2015-04] |
Y10T 83/0491 | . . | Cutting of interdigitating products [2015-04] |
Y10T 83/0495 | . . | Making and using a registration cut [2015-04] |
Y10T 83/05 | . . | With reorientation of tool between cuts [2015-04] |
Y10T 83/0505 | . . | With reorientation of work between cuts [2015-04] |
Y10T 83/051 | . . . | Relative to same tool [2015-04] |
Y10T 83/0515 | . . | During movement of work past flying cutter [2015-04] |
Y10T 83/0519 | . . . | Cyclically varying rate of tool or work movement [2015-04] |
Y10T 83/0524 | . . | Plural cutting steps [2015-04] |
Y10T 83/0529 | . . . | Blanking and cutting [2015-04] |
Y10T 83/0534 | . . . . | Cutting to join blanked holes [2015-04] |
Y10T 83/0538 | . . . | Repetitive transverse severing from leading edge of work [2015-04] |
Y10T 83/0543 | . . . . | Alternately forming products of less than total width of work [2015-04] |
Y10T 83/0548 | . . . . | With longitudinal severing [2015-04] |
Y10T 83/0553 | . . . . . | Effected by plural steps [2015-04] |
Y10T 83/0558 | . . . . . | Along zigzag or undulant line or cut [2015-04] |
Y10T 83/0562 | . . . . . | Prior to transverse severing [2015-04] |
Y10T 83/0567 | . . . . | Nonrectilinear cutting [2015-04] |
Y10T 83/0572 | . . . | Plural cutting steps effect progressive cut [2015-04] |
Y10T 83/0577 | . . . | Repetitive blanking [2015-04] |
Y10T 83/0581 | . . | Cutting part way through from opposite sides of work [2015-04] |
Y10T 83/0586 | . . | Effecting diverse or sequential cuts in same cutting step [2015-04] |
Y10T 83/0591 | . . | Cutting by direct application of fluent pressure to work [2015-04] |
Y10T 83/0596 | . . | Cutting wall of hollow work [2015-04] |
Y10T 83/06 | . . | Blanking [2015-04] |
Y10T 83/0605 | . . | Cut advances across work surface [2015-04] |
Y10T 83/061 | . | With manually actuated means to disturb cyclic operation [2015-04] |
Y10T 83/081 | . | With randomly actuated stopping means [2015-04] |
Y10T 83/083 | . . | With means to permit subsequent hand operation [2015-04] |
Y10T 83/084 | . . | With stop-signal-responsive means to actuate auxiliary cutter [2015-04] |
Y10T 83/086 | . . | With sensing of product or product handling means [2015-04] |
Y10T 83/088 | . . | Responsive to tool detector or work-feed-means detector [2015-04] |
Y10T 83/089 | . . . | Responsive to tool characteristic [2015-04] |
Y10T 83/091 | . . | Responsive to work sensing means [2015-04] |
Y10T 83/093 | . . . | Of buckled work [2015-04] |
Y10T 83/094 | . . . . | Running loop [2015-04] |
Y10T 83/096 | . . . | Detector supported on or urged against work [2015-04] |
Y10T 83/098 | . . . . | Resiliently biased [2015-04] |
Y10T 83/099 | . . | Manually operated [2015-04] |
Y10T 83/101 | . | With stopping means effective on completion of predetermined number of tool cycles [2015-04] |
Y10T 83/121 | . | With means to accomplish delayed stopping after cessation of cyclic operation [2015-04] |
Y10T 83/141 | . | With means to monitor and control operation [e.g., self-regulating means] [2015-04] |
Y10T 83/145 | . . | Including means to monitor product [2015-04] |
Y10T 83/148 | . . | Including means to correct the sensed operation [2015-04] |
Y10T 83/152 | . . . | And modify another operation [2015-04] |
Y10T 83/155 | . . . | Optimizing product from unique workpiece [2015-04] |
Y10T 83/159 | . . | Including means to compensate tool speed for work-feed variations [2015-04] |
Y10T 83/162 | . | With control means responsive to replaceable or selectable information program [2015-04] |
Y10T 83/164 | . . | For cutting component of animal; e.g., hair clipper [2015-04] |
Y10T 83/166 | . . | Removable element carries program [2015-04] |
Y10T 83/169 | . . . | Indeterminate length, web or strand [2015-04] |
Y10T 83/171 | . . . . | Magnetic [2015-04] |
Y10T 83/173 | . . | Arithmetically determined program [2015-04] |
Y10T 83/175 | . . . | With condition sensor [2015-04] |
Y10T 83/178 | . . . . | Responsive to work [2015-04] |
Y10T 83/18 | . . . | With operator input means [2015-04] |
Y10T 83/182 | . | With means to weigh product [2015-04] |
Y10T 83/202 | . | With product handling means [2015-04] |
Y10T 83/2022 | . . | Initiated by means responsive to product or work [2015-04] |
Y10T 83/2024 | . . . | Responsive to work [2015-04] |
Y10T 83/2027 | . . | Initiated by means directly responsive to tool movement [2015-04] |
Y10T 83/2029 | . . . | In return motion of tool [2015-04] |
Y10T 83/2031 | . . | Including means to drape the product [2015-04] |
Y10T 83/2033 | . . | Including means to form or hold pile of product pieces [2015-04] |
Y10T 83/2035 | . . . | In nested relation [2015-04] |
Y10T 83/2037 | . . . | In stacked or packed relation [2015-04] |
Y10T 83/204 | . . . . | Stacker sweeps along product support [2015-04] |
Y10T 83/2042 | . . . . | Including cut pieces overlapped on delivery means [2015-04] |
Y10T 83/2044 | . . . . | And means to separate product portions [2015-04] |
Y10T 83/2046 | . . . . | Including means to move stack bodily [2015-04] |
Y10T 83/2048 | . . . . . | By movement of stack holder [2015-04] |
Y10T 83/205 | . . . . . . | By timed relocation of holder along path of stack gscheme-change-itemth [2015-04] |
Y10T 83/2053 | . . . . . . . | Interrelated adjustment of holder movement and work-feeder [2015-04] |
Y10T 83/2055 | . . . . | And means to resist stack movement [2015-04] |
Y10T 83/2057 | . . . . | Including means to deliver individual pieces to a stack holder [2015-04] |
Y10T 83/2059 | . . . . . | With spindle to enter a hole or to make hole in product [2015-04] |
Y10T 83/2061 | . . . . . | By face-engaging means to push product broadside into stacked relation [2015-04] |
Y10T 83/2063 | . . . . | Upon emergence from hollow cutter [2015-04] |
Y10T 83/2066 | . . | By fluid current [2015-04] |
Y10T 83/2068 | . . . | Plural blasts directed against plural product pieces [2015-04] |
Y10T 83/207 | . . . | By suction means [2015-04] |
Y10T 83/2072 | . . | By brush means [2015-04] |
Y10T 83/2074 | . . | Including means to divert one portion of product from another [2015-04] |
Y10T 83/2077 | . . . | By kerf entering guide [2015-04] |
Y10T 83/2079 | . . . | Remaining or re-inserted product portion from base material [2015-04] |
Y10T 83/2081 | . . . | Gravity type [2015-04] |
Y10T 83/2083 | . . . | Deflecting guide [2015-04] |
Y10T 83/2085 | . . . . | Positionable gate in product flow path [2015-04] |
Y10T 83/2087 | . . . | Diverging product movers [2015-04] |
Y10T 83/209 | . . | Including means to replace product in base material after cutting [2015-04] |
Y10T 83/2092 | . . | Means to move, guide, or permit free fall or flight of product [2015-04] |
Y10T 83/2094 | . . . | Means to move product at speed different from work speed [2015-04] |
Y10T 83/2096 | . . . | Means to move product out of contact with tool [2015-04] |
Y10T 83/2098 | . . . . | With means to effect subsequent conveying or guiding [2015-04] |
Y10T 83/21 | . . . . | Out of contact with a rotary tool [2015-04] |
Y10T 83/2103 | . . . . . | Mover surrounds axis of tool rotation [2015-04] |
Y10T 83/2105 | . . . . . | Mover mounted on rotary tool [2015-04] |
Y10T 83/2107 | . . . . . . | For radial movement of product [2015-04] |
Y10T 83/2109 | . . . . . . . | Resiliently mounted [2015-04] |
Y10T 83/2111 | . . . . . | Mover is resiliently mounted [2015-04] |
Y10T 83/2113 | . . . . . | Pivoted mover [2015-04] |
Y10T 83/2116 | . . . . . . | And plural rotating tools [2015-04] |
Y10T 83/2118 | . . . . . | Stationary mover [2015-04] |
Y10T 83/212 | . . . . . . | And plural rotating tools [2015-04] |
Y10T 83/2122 | . . . . | By ejector within a hollow cutter [2015-04] |
Y10T 83/2124 | . . . . . | And means to strip the outer surface of a cutter [2015-04] |
Y10T 83/2127 | . . . . . | Ejector operated with return stroke of cutter [2015-04] |
Y10T 83/2129 | . . . . . | By means carried by cooperating cutter [2015-04] |
Y10T 83/2131 | . . . . . | By cam-operated ejector [2015-04] |
Y10T 83/2133 | . . . . . | By resiliently biased ejector [2015-04] |
Y10T 83/2135 | . . . . | Moving stripper timed with tool stroke [2015-04] |
Y10T 83/2137 | . . . . . | And alternatively movable to or from operating position [2015-04] |
Y10T 83/214 | . . . . . | Latched stripper released by tool return [2015-04] |
Y10T 83/2142 | . . . . . | Plural strippers operative upon plural tools [2015-04] |
Y10T 83/2144 | . . . . . | Single stripper operative upon plural tools [2015-04] |
Y10T 83/2146 | . . . . . | Spring arm stripper [2015-04] |
Y10T 83/2148 | . . . . . | Linkage actuated [2015-04] |
Y10T 83/215 | . . . . . | Carried by moving tool element or its support [2015-04] |
Y10T 83/2153 | . . . . . . | Fluid pressure actuated stripper [2015-04] |
Y10T 83/2155 | . . . . . . | Stripper biased against product [2015-04] |
Y10T 83/2157 | . . . . . . . | Elastomeric stripper contacting product [2015-04] |
Y10T 83/2159 | . . . . . . . | By spring means [2015-04] |
Y10T 83/2161 | . . . . . . . | By free weight of stripper [2015-04] |
Y10T 83/2163 | . . . . . | Stripper biased against product [2015-04] |
Y10T 83/2166 | . . . . . . | Spring biased stripper [2015-04] |
Y10T 83/2168 | . . . . | Manually operated stripper [2015-04] |
Y10T 83/217 | . . . . | Stationary stripper [2015-04] |
Y10T 83/2172 | . . . . . | Stripper encircles moving tool [2015-04] |
Y10T 83/2174 | . . . | Blockable exit port [2015-04] |
Y10T 83/2177 | . . . | Tool conforming member interposed between tool and work [2015-04] |
Y10T 83/2179 | . . . | Including means to move, or resist movement of, cut pieces along delivery chute [2015-04] |
Y10T 83/2181 | . . . | Active delivery means mounted on tool support [2015-04] |
Y10T 83/2183 | . . . | Product mover including gripper means [2015-04] |
Y10T 83/2185 | . . . . | Suction gripper [2015-04] |
Y10T 83/2187 | . . . . | Reciprocating product handler [2015-04] |
Y10T 83/219 | . . . . | Rotating or oscillating product handler [2015-04] |
Y10T 83/2192 | . . . | Endless conveyor [2015-04] |
Y10T 83/2194 | . . . . | And means to remove product therefrom [2015-04] |
Y10T 83/2196 | . . . | Roller[s] [2015-04] |
Y10T 83/2198 | . . . | Tiltable or withdrawable support [2015-04] |
Y10T 83/22 | . . . | Means to move product laterally [2015-04] |
Y10T 83/2203 | . . . . | Oscillating means [2015-04] |
Y10T 83/2205 | . . . . | Reciprocating means [2015-04] |
Y10T 83/2207 | . . . | Means to move product in a nonrectilinear path [2015-04] |
Y10T 83/2209 | . . . | Guide [2015-04] |
Y10T 83/2211 | . . . . | Abutment in path of product being moved by work feeder [2015-04] |
Y10T 83/2213 | . . . . | Product-diverting conduit in or from hollow tool [2015-04] |
Y10T 83/2216 | . . . . | Inclined conduit, chute or plane [2015-04] |
Y10T 83/2218 | . . . . | Abutment interposed in path of free fall or flight of product [2015-04] |
Y10T 83/222 | . | With receptacle or support for cut product [2015-04] |
Y10T 83/242 | . | With means to clean work or tool [2015-04] |
Y10T 83/263 | . | With means to apply transient nonpropellant fluent material to tool or work [2015-04] |
Y10T 83/283 | . | With means to control or modify temperature of apparatus or work [2015-04] |
Y10T 83/293 | . . | Of tool [2015-04] |
Y10T 83/303 | . | With tool sharpener or smoother [2015-04] |
Y10T 83/313 | . . | Spatially fixed tool [2015-04] |
Y10T 83/323 | . | With means to stretch work temporarily [2015-04] |
Y10T 83/343 | . | With means to deform work temporarily [2015-04] |
Y10T 83/364 | . | By fluid blast and/or suction [2015-04] |
Y10T 83/384 | . | By tool inside hollow work [2015-04] |
Y10T 83/385 | . . | Work pre-packed with internal tool[s] [2015-04] |
Y10T 83/386 | . . | With expanding mandrel [2015-04] |
Y10T 83/387 | . . | Interrelated tool feed means and means to actuate work immobilizer [2015-04] |
Y10T 83/388 | . . . | Actuated clamp element and work holder coact to position work [2015-04] |
Y10T 83/39 | . . | Synchronized tool and work feeding means [2015-04] |
Y10T 83/391 | . . | With means to position tool[s] for cutting [2015-04] |
Y10T 83/392 | . . | One tool [either internal or external] having compound motion [2015-04] |
Y10T 83/393 | . . . | Annulus and disc-type tool pair [2015-04] |
Y10T 83/394 | . . | One tool having unidirectional rotary motion [2015-04] |
Y10T 83/395 | . . | One tool having only rectilinear motion[s] [2015-04] |
Y10T 83/396 | . . . | Annulus and disc-type tool pair [2015-04] |
Y10T 83/397 | . . . . | A tool has a sequence of motion in plural paths [2015-04] |
Y10T 83/398 | . . . | Internal tool is an active cutter [2015-04] |
Y10T 83/40 | . . . | Multiple external active tools [2015-04] |
Y10T 83/401 | . . . . | Tools operate in a substantially common transverse plane of cut [2015-04] |
Y10T 83/402 | . . . . . | With tool actuating cams on a common support [2015-04] |
Y10T 83/403 | . . | With manually actuated means to position or facilitate positioning of work [2015-04] |
Y10T 83/404 | . | By means to misalign aligned apertured tools [2015-04] |
Y10T 83/408 | . . | Combined with another type tool of the class [2015-04] |
Y10T 83/412 | . . | Rectilinear relative movement only [2015-04] |
Y10T 83/416 | . . | Rotary relative movement solely about a single pivot [2015-04] |
Y10T 83/42 | . . . | With plural apertures in one or both carriers [2015-04] |
Y10T 83/424 | . | By increased tensioning of work-enclosing wire [2015-04] |
Y10T 83/444 | . | Tool engages work during dwell of intermittent workfeed [2015-04] |
Y10T 83/4443 | . . | Unicyclic [2015-04] |
Y10T 83/4445 | . . . | Convertible to and from unicyclic [2015-04] |
Y10T 83/4448 | . . . | Controlled by mechanical means [2015-04] |
Y10T 83/445 | . . | With work-moving clamp jaw [2015-04] |
Y10T 83/4453 | . . | Work moved solely by movable abutment [2015-04] |
Y10T 83/4455 | . . | Operation initiated by work-driven detector means to measure work length [2015-04] |
Y10T 83/4458 | . . | Work-sensing means to control work-moving or work-stopping means [2015-04] |
Y10T 83/446 | . . . | With means to initiate tool feed by same control impulse [2015-04] |
Y10T 83/4463 | . . | Work-sensing means to initiate tool feed [2015-04] |
Y10T 83/4465 | . . . | With work-stopping abutment in sensing means [2015-04] |
Y10T 83/4468 | . . | Plural tools at same station, one positioned for continuous engagement with work [2015-04] |
Y10T 83/447 | . . | Plural tools successively actuated at same station [2015-04] |
Y10T 83/4473 | . . . | During one dwell period [2015-04] |
Y10T 83/4475 | . . | Tool has motion additional to cutting stroke during tool cycle [2015-04] |
Y10T 83/4478 | . . . | Tool has additional motion during work dwell [2015-04] |
Y10T 83/448 | . . . . | Included in plural cutting cycles [2015-04] |
Y10T 83/4483 | . . . | Tool has work-feeding motion [2015-04] |
Y10T 83/4486 | . . | With variable direction of work-feed from cycle to cycle [2015-04] |
Y10T 83/4488 | . . . | In one of certain selected directions [2015-04] |
Y10T 83/4491 | . . | Interlock between tool actuating and work feed means [2015-04] |
Y10T 83/4493 | . . | Tool motion initiates work feed and vice versa [2015-04] |
Y10T 83/4496 | . . | Stored energy means for moving work or tool, loaded by tool or work [2015-04] |
Y10T 83/4498 | . . . | Work feed means actuates energy storage device for tool [2015-04] |
Y10T 83/4501 | . . | Work feed means controlled by means mounted on tool or tool support [2015-04] |
Y10T 83/4503 | . . . | Such means drives the work feed means [2015-04] |
Y10T 83/4506 | . . . . | Work feed means carried by tool or tool support [2015-04] |
Y10T 83/4508 | . . . . | With supplemental work feed means [2015-04] |
Y10T 83/4511 | . . . . | On return stroke of tool [2015-04] |
Y10T 83/4513 | . . . | Work feed means halted by means on tool or tool support [2015-04] |
Y10T 83/4516 | . . | Work-feed mechanism in nonfeed motion effects or initiates tool actuation [2015-04] |
Y10T 83/4518 | . . . | By striking tool actuator [2015-04] |
Y10T 83/4521 | . . . . | Nonfeed motion is reverse to feed motion [2015-04] |
Y10T 83/4523 | . . | With means to vary number of work-feed increments between tool strokes [2015-04] |
Y10T 83/4526 | . . | Dwell caused by imposing reverse motion on portion of flexible moving work [2015-04] |
Y10T 83/4529 | . . | With uninterrupted flow of work from supply source [2015-04] |
Y10T 83/4531 | . . | Work feed increment shorter than longitudinal tool field [2015-04] |
Y10T 83/4534 | . . | Unequal work feed increments in recurring series [2015-04] |
Y10T 83/4536 | . . . | Work carriage carries ratchet means to determine increments [2015-04] |
Y10T 83/4539 | . . | Means to change tool position, or length or datum position of work- or tool-feed increment [2015-04] |
Y10T 83/4541 | . . . | With means to vary magnitude of work-feed increment [2015-04] |
Y10T 83/4544 | . . . . | Multi-increment type [e.g., ticket issuing] [2015-04] |
Y10T 83/4546 | . . . . . | Length selector initiates machine operation [2015-04] |
Y10T 83/4549 | . . . . | By change in length of one member of feed-driving linkage [2015-04] |
Y10T 83/4551 | . . . . . | Rotating member [2015-04] |
Y10T 83/4554 | . . . . | By change of effective shape of driving or driven surface of element of work-feed mechanism [2015-04] |
Y10T 83/4556 | . . . . | By adjustment of fixed stop [2015-04] |
Y10T 83/4559 | . . . | With means to vary magnitude or base position of tool stroke [2015-04] |
Y10T 83/4561 | . . | With means to facilitate manual repositioning [shift] of work [2015-04] |
Y10T 83/4564 | . . | With means to produce plurality of work-feed increments per tool cycle [2015-04] |
Y10T 83/4567 | . . . | Including supplemental work-feed means [2015-04] |
Y10T 83/4569 | . . . . | Manual [2015-04] |
Y10T 83/4572 | . . . . | With stop adapted to engage abutment surface on work [2015-04] |
Y10T 83/4574 | . . . . . | Plurality of work stops successively effective [2015-04] |
Y10T 83/4577 | . . | Work fed successively to plural tools [2015-04] |
Y10T 83/4579 | . . . | With change of direction between tools [2015-04] |
Y10T 83/4582 | . . | Work advance occurs during return stroke of tool [2015-04] |
Y10T 83/4584 | . . | Dwell defined only by "dead-center" of rotating crank [2015-04] |
Y10T 83/4587 | . . | Dwell initiated by disengagement of surface of moving frictional feed means from work [2015-04] |
Y10T 83/4589 | . . . | Feed means has interrupted frictional surface [2015-04] |
Y10T 83/4592 | . . . | Feed means has rotary motion [2015-04] |
Y10T 83/4594 | . . | Dwell caused by clamping or blocking work during continuous operation of feed means [2015-04] |
Y10T 83/4597 | . . | With means to control magnitude of work-feed increment or work acceleration [2015-04] |
Y10T 83/4599 | . . . | Means to prevent random or excessive work feeds [2015-04] |
Y10T 83/4602 | . . . | Full stroke required of feed means [2015-04] |
Y10T 83/4604 | . . | Work feed functions as tool support [2015-04] |
Y10T 83/4607 | . . | With rotary work-carrier [2015-04] |
Y10T 83/461 | . . | With abutment to position work being fed with respect to cutter [2015-04] |
Y10T 83/4612 | . . . | With slip between positioned work and feed means [2015-04] |
Y10T 83/4615 | . . | Work guide and feed means have open side [2015-04] |
Y10T 83/4617 | . . | Work feed means modified to maintain clearance from tool [2015-04] |
Y10T 83/462 | . . | Plurality of work feed means in separate paths [2015-04] |
Y10T 83/4622 | . . | Intermittent drive type of gearing for work-feed means [2015-04] |
Y10T 83/4625 | . . . | Gearing modified to lock the work-feed means [2015-04] |
Y10T 83/4627 | . . . | Mutilated gear in mesh with gear driving work-feed means [2015-04] |
Y10T 83/463 | . . | Work-feed element contacts and moves with work [2015-04] |
Y10T 83/4632 | . . . | Comprises a work-moving gripper [2015-04] |
Y10T 83/4635 | . . . | Comprises element entering aperture in, or engaging abutment surface on, work [2015-04] |
Y10T 83/4637 | . . | With means to guide, position, or present work to work-feed means [2015-04] |
Y10T 83/464 | . . . | Means to transport work to work-feed means [2015-04] |
Y10T 83/4642 | . . . . | Including means to pick articles from pack or stack [2015-04] |
Y10T 83/4645 | . . | With means to clamp work during dwell [2015-04] |
Y10T 83/4647 | . . | One-revolution clutch in tool drive [2015-04] |
Y10T 83/465 | . | Cutting motion of tool has component in direction of moving work [2015-04] |
Y10T 83/4653 | . . | With means to initiate intermittent tool action [2015-04] |
Y10T 83/4656 | . . . | Tool moved in response to work-sensing means [2015-04] |
Y10T 83/4659 | . . . . | With means to vary "length" of product [2015-04] |
Y10T 83/4662 | . . . . . | To vary an end-product "length" [e.g., "crop cut"] [2015-04] |
Y10T 83/4664 | . . . . | With photo-electric work-sensing means [2015-04] |
Y10T 83/4667 | . . . . | With trip-switch work-sensing means [2015-04] |
Y10T 83/467 | . . . . . | To initiate feed movement of tool [2015-04] |
Y10T 83/4673 | . . . . . . | And to initiate flying movement of tool [2015-04] |
Y10T 83/4676 | . . . . | With work-responsive means to initiate flying movement of tool [2015-04] |
Y10T 83/4679 | . . . . . | With flying work-gripper means related to tool carrier [2015-04] |
Y10T 83/4682 | . . . . . | With means controlling flying speed dependent on work speed [2015-04] |
Y10T 83/4685 | . . . | With means to vary frequency of initiation [2015-04] |
Y10T 83/4688 | . . . . | By orbitally traveling trigger pin[s] [2015-04] |
Y10T 83/4691 | . . | Interrelated control of tool and work-feed drives [2015-04] |
Y10T 83/4693 | . . | With means to concurrently adjust flying frequency and retain flying speed of tool [2015-04] |
Y10T 83/4696 | . . | Plural diverse flying cutters [2015-04] |
Y10T 83/4699 | . . | Combined with other type cutter [2015-04] |
Y10T 83/4702 | . . . | With slitter [2015-04] |
Y10T 83/4705 | . . | Plural separately mounted flying cutters [2015-04] |
Y10T 83/4708 | . . | With means to render cutter pass[es] ineffective [2015-04] |
Y10T 83/4711 | . . . | With means to produce "mis-cut" [2015-04] |
Y10T 83/4714 | . . | Oscillating work shifter adjacent cutter [2015-04] |
Y10T 83/4717 | . . . | Work actuated senser initiates shifter [2015-04] |
Y10T 83/472 | . . | Wire tool [2015-04] |
Y10T 83/4722 | . . . | On tool support having reciprocation parallel to direction of work-feed [2015-04] |
Y10T 83/4725 | . . . . | And rotation about axis parallel to direction of work-feed [2015-04] |
Y10T 83/4728 | . . | Tool flies by engagement with the work [2015-04] |
Y10T 83/4731 | . . . | Tool merely flexes with moving work [2015-04] |
Y10T 83/4734 | . . | Flying support or guide for work [2015-04] |
Y10T 83/4737 | . . | With tool speed regulator [2015-04] |
Y10T 83/474 | . . | With work feed speed regulator [2015-04] |
Y10T 83/4743 | . . . | With means to vary cyclically speed of work [2015-04] |
Y10T 83/4746 | . . | Spring return of tool in counterfly direction [2015-04] |
Y10T 83/4749 | . . | Tool mounted on oscillating standard [2015-04] |
Y10T 83/4751 | . . . | Both tools of couple on single standard [2015-04] |
Y10T 83/4754 | . . . . | One tool swings out of work path on return stroke [2015-04] |
Y10T 83/4757 | . . | Tool carrier shuttles rectilinearly parallel to direction of work feed [2015-04] |
Y10T 83/476 | . . . | Including means to secure work to carrier [2015-04] |
Y10T 83/4763 | . . . | Both members of cutting pair on same carrier [2015-04] |
Y10T 83/4766 | . . | Orbital motion of cutting blade [2015-04] |
Y10T 83/4769 | . . . | Work feeder mounted on tool support [2015-04] |
Y10T 83/4772 | . . . . | Gripper-type feeder [2015-04] |
Y10T 83/4775 | . . . | Tool speed varied within each orbital cycle [2015-04] |
Y10T 83/4778 | . . . | Work feed gripper carried on endless belt [2015-04] |
Y10T 83/478 | . . . | Endless belt or chain tool carrier [2015-04] |
Y10T 83/4783 | . . . | Constantly oriented tool with arcuate cutting path [2015-04] |
Y10T 83/4786 | . . . . | Cutting couple type [2015-04] |
Y10T 83/4789 | . . . | Rotatable disc-type tool on orbiting axis [2015-04] |
Y10T 83/4792 | . . . . | Idling disc [2015-04] |
Y10T 83/4795 | . . . | Rotary tool [2015-04] |
Y10T 83/4798 | . . . . | Segmented disc slitting or slotting tool [2015-04] |
Y10T 83/4801 | . . . . | With undulant cutting edge [e.g., "pinking" tool] [2015-04] |
Y10T 83/4804 | . . . . | Single tool action drive [2015-04] |
Y10T 83/4807 | . . . . . | With one-revolution drive [2015-04] |
Y10T 83/4809 | . . . . | With loop former preceding tool [2015-04] |
Y10T 83/4812 | . . . . | Compound movement of tool during tool cycle [2015-04] |
Y10T 83/4815 | . . . . . | Axial reciprocation of tool [2015-04] |
Y10T 83/4818 | . . . . | Interconnected work feeder and tool driver [2015-04] |
Y10T 83/4821 | . . . . | Side cutting helical blade [2015-04] |
Y10T 83/4824 | . . . . | With means to cause progressive transverse cutting [2015-04] |
Y10T 83/4827 | . . . . . | With helical cutter blade [2015-04] |
Y10T 83/483 | . . . . | With cooperating rotary cutter or backup [2015-04] |
Y10T 83/4833 | . . . . . | Cooperating tool axes adjustable relative to each other [2015-04] |
Y10T 83/4836 | . . . . . | With radial overlap of the cutting members [2015-04] |
Y10T 83/4838 | . . . . . | With anvil backup [2015-04] |
Y10T 83/4841 | . . . . . . | With resilient anvil surface [2015-04] |
Y10T 83/4844 | . . . . . | Resiliently urged cutter or anvil member [2015-04] |
Y10T 83/4847 | . . . . | With cooperating stationary tool [2015-04] |
Y10T 83/485 | . | Cutter with timed stroke relative to moving work [2015-04] |
Y10T 83/487 | . . | Work swings about progressively cutting tool during tool stroke [2015-04] |
Y10T 83/489 | . . | Tool actuated by movable work support [2015-04] |
Y10T 83/49 | . . | Traveling cutter [2015-04] |
Y10T 83/492 | . . | With means to vary timing of tool feed [2015-04] |
Y10T 83/494 | . . | Uniform periodic tool actuation [2015-04] |
Y10T 83/496 | . . . | With periodic lateral feed of tool or work [2015-04] |
Y10T 83/498 | . . . | With plural tool stations [2015-04] |
Y10T 83/50 | . . . | Reciprocating tool [2015-04] |
Y10T 83/501 | . . . | With plural tools on a single tool support [2015-04] |
Y10T 83/503 | . . | With plural tool stations [2015-04] |
Y10T 83/505 | . | Operation controlled by means responsive to product [2015-04] |
Y10T 83/515 | . . | Actuation of tool controlled [2015-04] |
Y10T 83/525 | . | Operation controlled by detector means responsive to work [2015-04] |
Y10T 83/527 | . . | With means to control work-responsive signal system [2015-04] |
Y10T 83/528 | . . . | To delay response to work-senser [2015-04] |
Y10T 83/53 | . . . | To change length of product [2015-04] |
Y10T 83/531 | . . | With plural work-sensing means [2015-04] |
Y10T 83/533 | . . | With photo-electric work-sensing means [2015-04] |
Y10T 83/535 | . . | Release of interlock controlled [2015-04] |
Y10T 83/536 | . . | Movement of work controlled [2015-04] |
Y10T 83/538 | . . | Positioning of tool controlled [2015-04] |
Y10T 83/54 | . . | Actuation of tool controlled by work-driven means to measure work length [2015-04] |
Y10T 83/541 | . . | Actuation of tool controlled in response to work-sensing means [2015-04] |
Y10T 83/543 | . . . | Sensing means responsive to work indicium or irregularity [2015-04] |
Y10T 83/544 | . . . | With trip-switch in work-sensing mechanism [2015-04] |
Y10T 83/546 | . | Interrelated tool actuating and work guide moving means [2015-04] |
Y10T 83/566 | . | Interrelated tool actuating means and means to actuate work immobilizer [2015-04] |
Y10T 83/5669 | . . | Work clamp [2015-04] |
Y10T 83/5678 | . . . | Tool deflected by guide on tightened clamp [2015-04] |
Y10T 83/5687 | . . . . | With means to control clamping force [2015-04] |
Y10T 83/5696 | . . . | Clamp driven by reaction from tool force [2015-04] |
Y10T 83/5705 | . . . | With means providing for plural steps in clamping stroke [2015-04] |
Y10T 83/5715 | . . . | With sequencing means [2015-04] |
Y10T 83/5724 | . . . | With provision for manual control of clamp [2015-04] |
Y10T 83/5733 | . . . | Tool or tool support on movable clamp jaw [2015-04] |
Y10T 83/5742 | . . . | Clamp moved by direct impact of tool or tool support [2015-04] |
Y10T 83/5751 | . . . . | Clamp retracted by impact of tool or tool support [2015-04] |
Y10T 83/576 | . . . | Clamp actuating means driven by tool or tool support [2015-04] |
Y10T 83/5769 | . . . . | Clamp yieldably driven by tool or tool support [2015-04] |
Y10T 83/5778 | . . . . . | With resilient drive element [2015-04] |
Y10T 83/5787 | . . . | Clamp driven by yieldable means [2015-04] |
Y10T 83/5796 | . . . . | Drive means is resilient [2015-04] |
Y10T 83/5805 | . . . . | Fluid pressure yieldable drive means [2015-04] |
Y10T 83/5815 | . . | Work-stop abutment [2015-04] |
Y10T 83/5824 | . . . | Oppositely effective abutments [2015-04] |
Y10T 83/5833 | . . . | With cyclic means to alter work-stopping position [2015-04] |
Y10T 83/5842 | . . . | Stop partakes of tool motion [2015-04] |
Y10T 83/5851 | . . . . | Carried by tool or tool support [2015-04] |
Y10T 83/586 | . | Interrelated tool actuating means and means to actuate work-mover stop [2015-04] |
Y10T 83/606 | . | Interrelated tool actuating means and guard means [2015-04] |
Y10T 83/613 | . . | Work guard [2015-04] |
Y10T 83/619 | . . | Cutter guide slot closer [2015-04] |
Y10T 83/626 | . | Operation of member controlled by means responsive to position of element remote from member [e.g., interlock] [2015-04] |
Y10T 83/637 | . . | With means to initiate operation of member [2015-04] |
Y10T 83/647 | . | With means to convey work relative to tool station [2015-04] |
Y10T 83/6472 | . . | By fluid current [2015-04] |
Y10T 83/6473 | . . | Centrifugal feed to tangential tool [e.g., "Beria" type] [2015-04] |
Y10T 83/6475 | . . | With means to regulate work-feed speed [2015-04] |
Y10T 83/6476 | . . | Including means to move work from one tool station to another [2015-04] |
Y10T 83/6478 | . . . | Tool stations angularly related [2015-04] |
Y10T 83/648 | . . . . | Work manipulated between tool stations [2015-04] |
Y10T 83/6481 | . . . . | With static tool [2015-04] |
Y10T 83/6483 | . . . | Tool stations staggered relative to one another [2015-04] |
Y10T 83/6484 | . . . | Punch or die station [2015-04] |
Y10T 83/6486 | . . . | Notcher or pinker station [2015-04] |
Y10T 83/6488 | . . . | Work reciprocated past double-edged knife [2015-04] |
Y10T 83/6489 | . . . | Slitter station [2015-04] |
Y10T 83/6491 | . . . . | And transverse cutter station [2015-04] |
Y10T 83/6492 | . . | Plural passes of diminishing work piece through tool station [2015-04] |
Y10T 83/6494 | . . . | Work alternately, angularly re-oriented relative to tool station [2015-04] |
Y10T 83/6496 | . . . . | By additional means to engage work and orient it relative to tool station [2015-04] |
Y10T 83/6497 | . . . . | By roller or roll-like element [2015-04] |
Y10T 83/6499 | . . . | Work rectilinearly reciprocated through tool station [2015-04] |
Y10T 83/65 | . . . . | With means to cause or permit angular re-orientation of work about axis parallel to plane of cut [2015-04] |
Y10T 83/6502 | . . . . . | By endless member having work-engaging teeth [2015-04] |
Y10T 83/6504 | . . . . . | By member having work-engaging tooth [2015-04] |
Y10T 83/6505 | . . . . . . | Including plural work-engaging teeth [2015-04] |
Y10T 83/6507 | . . . . . . . | Fluid operated [2015-04] |
Y10T 83/6508 | . . . . | With means to cause movement of work transversely toward plane of cut [2015-04] |
Y10T 83/651 | . . . . . | By means to cause movement toward and away from plane of cut [2015-04] |
Y10T 83/6512 | . . . . . . | Actuated by movement of a member on reciprocating means [2015-04] |
Y10T 83/6513 | . . . . . . | Actuated by passive means which is external to reciprocating means [2015-04] |
Y10T 83/6515 | . . . . . | By means to define increment of movement toward plane of cut [2015-04] |
Y10T 83/6516 | . . . . . . | Interrelated with movement of reciprocating means [2015-04] |
Y10T 83/6518 | . . . . . . | By pusher mechanism [2015-04] |
Y10T 83/652 | . . . . . . . | With additional work holding or positioning means [2015-04] |
Y10T 83/6521 | . . . . . . . . | Work holding means includes actuator [2015-04] |
Y10T 83/6523 | . . . . . . . | Including plural, simultaneously acting pusher elements [2015-04] |
Y10T 83/6524 | . . . . . . . . | Independently adjustable [2015-04] |
Y10T 83/6526 | . . . . . . . . | With additional means to retract elements [2015-04] |
Y10T 83/6528 | . . . . . . . . | Power derived from movement of reciprocating means [2015-04] |
Y10T 83/6529 | . . . . . . . . | Power derived from fluid pressure means [2015-04] |
Y10T 83/6531 | . . . . . . . . | Movement by screw means [2015-04] |
Y10T 83/6532 | . . . . . . . . | Movement by rack and pinion or pawl [2015-04] |
Y10T 83/6534 | . . . . . . . | With handle [2015-04] |
Y10T 83/6536 | . . . . . . | By carriage [2015-04] |
Y10T 83/6537 | . . . . | By cable or belt drive [2015-04] |
Y10T 83/6539 | . . | With means for transverse positioning of work on a moving conveyor [2015-04] |
Y10T 83/654 | . . | With work-constraining means on work conveyor [i.e., "work-carrier"] [2016-05] |
Y10T 83/6542 | . . . | Plural means to constrain plural work pieces [2015-04] |
Y10T 83/6544 | . . . . | End of work protrudes through aperture in carrier [2015-04] |
Y10T 83/6545 | . . . | With means to guide work-carrier in nonrectilinear path [2015-04] |
Y10T 83/6547 | . . . . | About axis fixed relative to tool station [2015-04] |
Y10T 83/6548 | . . . . . | Infeed [2015-04] |
Y10T 83/655 | . . . . . . | About vertical axis [2015-04] |
Y10T 83/6552 | . . . . . . . | Cut normal to axis [2015-04] |
Y10T 83/6553 | . . . . . . . . | Work-guide tube [2015-04] |
Y10T 83/6555 | . . . . . . | Cut normal to axis [2015-04] |
Y10T 83/6556 | . . . . . . . | Oscillating work-carrier [2015-04] |
Y10T 83/6558 | . . . . . . . | Multiple cutters [2015-04] |
Y10T 83/656 | . . . . . . . . | Coaxial rotary cutters [2015-04] |
Y10T 83/6561 | . . . . . | Work stationary during cut [2015-04] |
Y10T 83/6563 | . . . | With means to orient or position work carrier relative to tool station [2015-04] |
Y10T 83/6564 | . . . . | By pattern or templet [2015-04] |
Y10T 83/6566 | . . . . | By indexing means [2015-04] |
Y10T 83/6568 | . . . | With additional work-locating means on work-carrier [2015-04] |
Y10T 83/6569 | . . | With means to stop work conveyor [2015-04] |
Y10T 83/6571 | . . | With means to store work articles [2015-04] |
Y10T 83/6572 | . . | With additional mans to engage work and orient it relative to tool station [2015-04] |
Y10T 83/6574 | . . . | By work-stopping abutment [2015-04] |
Y10T 83/6576 | . . . | By opposed lateral guide means [2015-04] |
Y10T 83/6577 | . . . | With means to adjust additional means [2015-04] |
Y10T 83/6579 | . . | With means to press work to work-carrier [2015-04] |
Y10T 83/658 | . . | With projections on work-carrier [e.g., pin wheel] [2015-04] |
Y10T 83/6582 | . . | Tool between tandem arranged work carrying means [2015-04] |
Y10T 83/6584 | . . | Cut made parallel to direction of and during work movement [2015-04] |
Y10T 83/6585 | . . . | Including nonconcurrently acting tool [2015-04] |
Y10T 83/6587 | . . . | Including plural, laterally spaced tools [2015-04] |
Y10T 83/6588 | . . . . | Tools mounted on common tool support [2015-04] |
Y10T 83/659 | . . . . . | Tools axially shiftable on support [2015-04] |
Y10T 83/6592 | . . . | Interrelated work-conveying and tool-moving means [2015-04] |
Y10T 83/6593 | . . . . | With reciprocating tool [e.g., "jigsaw" type] [2015-04] |
Y10T 83/6595 | . . . . | With means to move tool laterally of feed direction during cutting [2015-04] |
Y10T 83/6596 | . . . . | With means to effect difference between work speed and tool speed [2015-04] |
Y10T 83/6598 | . . . . | Tool co-axial with work-conveying means [2015-04] |
Y10T 83/66 | . . . | With means to press work to tool [2015-04] |
Y10T 83/6601 | . . . | Bevel cutting tool [2015-04] |
Y10T 83/6603 | . . . | Tool shiftable relative to work-conveying means [2015-04] |
Y10T 83/6604 | . . . | Tool in contact with surface of work-conveying means [2015-04] |
Y10T 83/6606 | . . . | Tool between laterally spaced work-conveying means [2015-04] |
Y10T 83/6608 | . . . | By rectilinearly moving work carriage [2015-04] |
Y10T 83/6609 | . . . . | Angularly adjustable [2015-04] |
Y10T 83/6611 | . . . . . | Having positive adjustment stop; e.g., link [2015-04] |
Y10T 83/6612 | . . . . . | Having position indicating means [2015-04] |
Y10T 83/6614 | . . . . | Pusher engaging rear surface of work [2015-04] |
Y10T 83/6616 | . . . . . | Having means to actuate pusher [2015-04] |
Y10T 83/6617 | . . . . . . | Hydraulic or pneumatic means [2015-04] |
Y10T 83/6619 | . . . . . . | Gear or pulley actuated pusher [2015-04] |
Y10T 83/662 | . . . . . . | Lever, cam, or link actuated pusher [2015-04] |
Y10T 83/6622 | . . . . | Having means to actuate carriage [2015-04] |
Y10T 83/6624 | . . . . . | Hydraulic or pneumatic means [2015-04] |
Y10T 83/6625 | . . . . . | Gear or pulley [2015-04] |
Y10T 83/6627 | . . . . . . | Adapted to place tension on flacid member [2015-04] |
Y10T 83/6628 | . . . . . | Lever, cam, or link means [2015-04] |
Y10T 83/663 | . . . . | On or attached to vehicle [2015-04] |
Y10T 83/6632 | . . . . | Supported for movement at one side of tool only [2015-04] |
Y10T 83/6633 | . . . | By work moving flexible chain or conveyor [2015-04] |
Y10T 83/6635 | . . . | By feed roller [2015-04] |
Y10T 83/6636 | . . . . | Pinch rollers [2015-04] |
Y10T 83/6638 | . . . | Unattached manual work pusher [2015-04] |
Y10T 83/664 | . . | Roller [2015-04] |
Y10T 83/6641 | . . . | Plural independent rollers for feed of plural distinct work [2015-04] |
Y10T 83/6643 | . . . | Shaped to conform to work [2015-04] |
Y10T 83/6644 | . . . | With work-supplying reel [2015-04] |
Y10T 83/6646 | . . . . | And provision for selecting feed length [2015-04] |
Y10T 83/6648 | . . . | Continuous conveying during, cutting; e.g., straw cutting [2015-04] |
Y10T 83/6649 | . . . | Supporting work at cutting station [2015-04] |
Y10T 83/6651 | . . . . | Comprising part of cutting station [2015-04] |
Y10T 83/6652 | . . . | Tool and feed roller actuated by common handle [2015-04] |
Y10T 83/6654 | . . . | Tool and roller on common movable support [2015-04] |
Y10T 83/6656 | . . | Rectilinear movement only [2015-04] |
Y10T 83/6657 | . . . | Tool opposing pusher [2015-04] |
Y10T 83/6659 | . . . . | Hydraulically or pneumatically actuated [2015-04] |
Y10T 83/666 | . . . . | Screw actuated [2015-04] |
Y10T 83/6662 | . . . . | Gear or pulley actuated [2015-04] |
Y10T 83/6664 | . . . . | Lever, cam, or link actuated [2015-04] |
Y10T 83/6665 | . . . . | Spring or gravity urged [2015-04] |
Y10T 83/6667 | . . | Work carrier rotates about axis fixed relative to tool station [2015-04] |
Y10T 83/6668 | . . | Interrelated work-feeding means and tool-moving means [2015-04] |
Y10T 83/667 | . | Tool carrier or guide affixed to work during cutting [2015-04] |
Y10T 83/674 | . . | By flexible work-engaging member [2015-04] |
Y10T 83/68 | . . | Entirely work supported [2015-04] |
Y10T 83/687 | . | By tool reciprocable along elongated edge [2015-04] |
Y10T 83/6875 | . . | With means permitting tool to be rotatably adjusted about its cutting edge during cutting [2015-04] |
Y10T 83/688 | . . | With dynamic balancing or shock absorbing means [2015-04] |
Y10T 83/6885 | . . | With tool of another type [2015-04] |
Y10T 83/689 | . . | With means to change to other type tool [2015-04] |
Y10T 83/6895 | . . | Plural reciprocable tools [2015-04] |
Y10T 83/69 | . . | Stored energy furnishes drive in one direction [2015-04] |
Y10T 83/6905 | . . | With tool in-feed [2015-04] |
Y10T 83/691 | . . . | And auxiliary means for promoting or retarding tool in-feed [2015-04] |
Y10T 83/6915 | . . . . | By yieldable means [2015-04] |
Y10T 83/692 | . . . . | And means to vary tool in-feed speed [2015-04] |
Y10T 83/6925 | . . . . | With interrelated tool actuating and in-feed means [2015-04] |
Y10T 83/693 | . . . | Of rectilinearly reciprocating tool [2015-04] |
Y10T 83/6935 | . . . . | With in-feed by pivoting carrier [2015-04] |
Y10T 83/694 | . . . | And means to prevent tool in-feed [2015-04] |
Y10T 83/6945 | . . . | With passive means to guide tool directly [2015-04] |
Y10T 83/695 | . . . . | By plural opposed guide surfaces [2015-04] |
Y10T 83/6955 | . . . . . | Having relative adjustment between guide surfaces [2015-04] |
Y10T 83/696 | . . . . . | With relative adjustment between guide and work or work-support [2015-04] |
Y10T 83/6965 | . . . . . . | By or with additional movable work-support portion [2015-04] |
Y10T 83/697 | . . . . . . | By rotation about an axis parallel to the work-support surface [2015-04] |
Y10T 83/6975 | . . . . . . | By rotation about an axis perpendicular to the work-support surface [2015-04] |
Y10T 83/698 | . . . | Including means to cause nonrectilinear tool infeed [2015-04] |
Y10T 83/6985 | . . . | Of arcuately oscillating tool [2015-04] |
Y10T 83/699 | . . . | Of tool carrier on single moving pivot [2015-04] |
Y10T 83/6995 | . . . . | Pivot moves in closed loop [2015-04] |
Y10T 83/70 | . . . . | Pivot moves to and fro in arcuate path [2015-04] |
Y10T 83/7005 | . . . . . | Axis of arcuate path moves during cutting [2015-04] |
Y10T 83/701 | . . . . | Pivot moves to and fro in rectilinear path [2015-04] |
Y10T 83/7015 | . . | Having uniplanar compound motion [2015-04] |
Y10T 83/702 | . . . | By plural arcuately oscillating carrier [2015-04] |
Y10T 83/7025 | . . . | Constantly oriented tool travelling in orbit [2015-04] |
Y10T 83/703 | . . . | Tool rocks cutting reciprocations [2015-04] |
Y10T 83/7035 | . . . . | One tool reciprocates along fixed guide element [2015-04] |
Y10T 83/704 | . . | With work-support and means to vary relationship between tool and work support [2015-04] |
Y10T 83/7045 | . . | Arcuately oscillating tool carried on single pivot [2015-04] |
Y10T 83/705 | . . | With means to support tool at opposite ends [2015-04] |
Y10T 83/7055 | . . . | And apply drive force to both ends of tool [2015-04] |
Y10T 83/706 | . . . . | By flexible drive means [2015-04] |
Y10T 83/7065 | . . . . | By reciprocating rigid support [2015-04] |
Y10T 83/707 | . | By endless band or chain knife [2015-04] |
Y10T 83/7076 | . . | With programming means [2015-04] |
Y10T 83/7083 | . . | With cutter other than endlessly orbiting type [2015-04] |
Y10T 83/7089 | . . | Including contiguous oppositely moving knife portions [2015-04] |
Y10T 83/7095 | . . | With means to change to non-endlessly orbiting cutter [2015-04] |
Y10T 83/7101 | . . | With tool in-feed [2015-04] |
Y10T 83/7108 | . . . | Including ground-traversing vehicle [2015-04] |
Y10T 83/7114 | . . . | Including means to permit arcuate in-feed motion [2015-04] |
Y10T 83/712 | . . . . | Including means to relocate path of in-feed motion [2015-04] |
Y10T 83/7126 | . . . . . | Angular relative previous path [2015-04] |
Y10T 83/7133 | . . . | By gravity [2015-04] |
Y10T 83/7139 | . . . . | With fluid in-feed regulating means [2015-04] |
Y10T 83/7145 | . . . | By motor-driven mechanism [2015-04] |
Y10T 83/7151 | . . | With scale or indicator [2015-04] |
Y10T 83/7158 | . . | Including plural cutting zones [2015-04] |
Y10T 83/7164 | . . . | With adjustment of separation between zones [2015-04] |
Y10T 83/717 | . . . . | By lever means [2015-04] |
Y10T 83/7176 | . . . . | By screw-threaded means [2015-04] |
Y10T 83/7183 | . . . | Including "figure-8" band [2015-04] |
Y10T 83/7189 | . . . | Comprising plural bands [2015-04] |
Y10T 83/7195 | . . | Including means to adjust relationship between band and work-support surface [2015-04] |
Y10T 83/7201 | . . . | By varying angle between band and work-support surface [2015-04] |
Y10T 83/7208 | . . . . | By tilting band carrier [2015-04] |
Y10T 83/7214 | . . . . . | About point of intersection of cutting span and work-support surface [2015-04] |
Y10T 83/722 | . . . | By varying distance between band and work-support surface [2015-04] |
Y10T 83/7226 | . . | With means to guard the tension [2015-04] |
Y10T 83/7233 | . . . | Including means to retard undriven pulley or sprocket [2015-04] |
Y10T 83/7239 | . . . | With means to vary distance between pulley or sprocket axes [2015-04] |
Y10T 83/7245 | . . . . | And angular relationship of axes [2015-04] |
Y10T 83/7251 | . . . . | Including means to yieldably bias pulley [2015-04] |
Y10T 83/7258 | . . . . . | By fluid means [2015-04] |
Y10T 83/7264 | . . | With special blade guide means [2015-04] |
Y10T 83/727 | . | With means to guide moving work [2015-04] |
Y10T 83/728 | . . | In pivotal or arcuate movement [2015-04] |
Y10T 83/73 | . . | Guide fixed to or integral with stationary tool element [2015-04] |
Y10T 83/731 | . . . | Tool element cooperates with a second tool [2015-04] |
Y10T 83/732 | . . | With guard [2015-04] |
Y10T 83/734 | . . | With attachment or operative connection to tool carrier [2015-04] |
Y10T 83/735 | . . | With attachment or operative connection to passive tool guide [2015-04] |
Y10T 83/736 | . . | Guide cooperates with template or straight edge secured to work [2015-04] |
Y10T 83/738 | . . | Curved or deflecting guide [2015-04] |
Y10T 83/739 | . . | Positively confines or otherwise determines path of work [2015-04] |
Y10T 83/74 | . . | Adapted to permit maneuvering of work at tool zone [2015-04] |
Y10T 83/741 | . . | With movable or yieldable guide element [2015-04] |
Y10T 83/743 | . . . | Opposed to work-supporting surface [2015-04] |
Y10T 83/744 | . . | Plural guide elements [2015-04] |
Y10T 83/745 | . . . | Opposed [2015-04] |
Y10T 83/747 | . . | Opposed to work-supporting surface [2015-04] |
Y10T 83/748 | . | With work immobilizer [2015-04] |
Y10T 83/7487 | . . | Means to clamp work [2015-04] |
Y10T 83/7493 | . . . | Combined with, peculiarly related to, other element [2015-04] |
Y10T 83/75 | . . . . | With or to tool guide [2015-04] |
Y10T 83/7507 | . . . . | Guide for traveling cutter [2015-04] |
Y10T 83/7513 | . . . . | Tool or tool support on movable clamp jaw [2015-04] |
Y10T 83/752 | . . . | With means providing for plural steps in clamping stroke [2015-04] |
Y10T 83/7527 | . . . | With equalizer or self-aligning jaw [2015-04] |
Y10T 83/7533 | . . . | With biasing or counterbalancing means [2015-04] |
Y10T 83/754 | . . . | Clamp driven by yieldable means [2015-04] |
Y10T 83/7547 | . . . | Liquid pressure actuating means [2015-04] |
Y10T 83/7553 | . . . | Including means to retain clamp jaw in position [2015-04] |
Y10T 83/756 | . . . | Self-locking drive means [2015-04] |
Y10T 83/7567 | . . . | Manually actuated drive means [2015-04] |
Y10T 83/7573 | . . . | Including clamping face of specific structure [2015-04] |
Y10T 83/758 | . . . | With means to adjust clamp position or stroke [2015-04] |
Y10T 83/7587 | . . | Gapped work-constrainer [2015-04] |
Y10T 83/7593 | . . | Work-stop abutment [2015-04] |
Y10T 83/76 | . . . | With scale or indicator [2015-04] |
Y10T 83/7607 | . . . | Normal to plane of cut [2015-04] |
Y10T 83/7613 | . . . . | Adjustable [2015-04] |
Y10T 83/762 | . . . . . | Angularly relative to plane of cut; e.g., miter [2015-04] |
Y10T 83/7627 | . . . . | With traversing cutter guide; e.g., cut-off saw [2015-04] |
Y10T 83/7633 | . . . | Collapsible [2015-04] |
Y10T 83/764 | . . . | Retractable [2015-04] |
Y10T 83/7647 | . . . | Adjustable [2015-04] |
Y10T 83/7653 | . . . . | Having curved cutting edge to make arcuate cut, plural nonaligned intersecting cutting edges, or spaced punches [2015-04] |
Y10T 83/766 | . . . . . | Spaced edges [2015-04] |
Y10T 83/7667 | . . . | Having curved cutting edge to make arcuate cut, plural nonaligned intersecting cutting edges, or spaced punches [2015-04] |
Y10T 83/7673 | . . . . | Spaced edges [2015-04] |
Y10T 83/768 | . | Rotatable disc tool pair or tool and carrier [2015-04] |
Y10T 83/7684 | . . | With means to support work relative to tool[s] [2015-04] |
Y10T 83/7688 | . . . | Plural tool elements successively actuated at same station [2015-04] |
Y10T 83/7693 | . . . | Tool moved relative to work-support during cutting [2015-04] |
Y10T 83/7697 | . . . . | Tool angularly adjustable relative to work-support [2015-04] |
Y10T 83/7701 | . . . | Supporting surface and tool axis angularly related [2015-04] |
Y10T 83/7705 | . . . . | Adjustable angular relationship [2015-04] |
Y10T 83/7709 | . . . | Unidirectionally movable work support [2015-04] |
Y10T 83/7713 | . . . . | With opposed work-presser [2015-04] |
Y10T 83/7718 | . . . . . | Presser co-axial with tool [2015-04] |
Y10T 83/7722 | . . . | Support and tool relatively adjustable [2015-04] |
Y10T 83/7726 | . . . . | By movement of the tool [2015-04] |
Y10T 83/773 | . . . | Work-support includes passageway for tool [e.g., slotted table] [2015-04] |
Y10T 83/7734 | . . | With guard for tool [2015-04] |
Y10T 83/7738 | . . | Optional tool pairs alternatively operative [2015-04] |
Y10T 83/7743 | . . . | One element of tool pairs common to all pairs [2015-04] |
Y10T 83/7747 | . . | With means to permit replacement of tool [2015-04] |
Y10T 83/7751 | . . | Means to separate elements of tool pair [2015-04] |
Y10T 83/7755 | . . | Carrier for rotatable tool movable during cutting [2015-04] |
Y10T 83/7759 | . . . | Unicyclic movement [2015-04] |
Y10T 83/7763 | . . . | Tool carrier reciprocable rectilinearly [2015-04] |
Y10T 83/7768 | . . . . | With means to adjust path of reciprocation [2015-04] |
Y10T 83/7772 | . . . . . | Angular relative to previous path [2015-04] |
Y10T 83/7776 | . . . . | With means to reciprocate carrier [2015-04] |
Y10T 83/778 | . . . . . | And means to rotate tool [2015-04] |
Y10T 83/7784 | . . . . | With means to rotate tool [2015-04] |
Y10T 83/7788 | . . . | Tool carrier oscillated or rotated [2015-04] |
Y10T 83/7793 | . . | Means to rotate or oscillate tool [2015-04] |
Y10T 83/7797 | . . . | Including means to rotate both elements of tool pair [2015-04] |
Y10T 83/7801 | . . . . | Including means to rotate both elements at different speeds [2015-04] |
Y10T 83/7805 | . . . . | And means to change speed of rotation [2015-04] |
Y10T 83/7809 | . . | Tool pair comprises rotatable tools [2015-04] |
Y10T 83/7813 | . . . | Tool pair elements angularly related [2015-04] |
Y10T 83/7818 | . . . . | Elements of tool pair angularly adjustable relative to each other [2015-04] |
Y10T 83/7822 | . . . | Tool pair axially shiftable [2015-04] |
Y10T 83/7826 | . . . . | With shifting mechanism for at least one element of tool pair [2015-04] |
Y10T 83/783 | . . . | Tool pair comprises contacting overlapped discs [2015-04] |
Y10T 83/7834 | . . . . | With means to effect axial pressure on pair [2015-04] |
Y10T 83/7838 | . . . . . | With means to change axial pressure [2015-04] |
Y10T 83/7843 | . . . . | With means to change overlap of discs [2015-04] |
Y10T 83/7847 | . . . | Tool element axially shiftable [2015-04] |
Y10T 83/7851 | . . . | Tool pair comprises disc and cylindrical anvil [2015-04] |
Y10T 83/7855 | . . . . | With adjustable means to urge tool elements together [2015-04] |
Y10T 83/7859 | . . . | Elements of tool pair adjustably spaced [2015-04] |
Y10T 83/7863 | . . | Tool pair comprises rotatable tool and nonrotatable tool [2015-04] |
Y10T 83/7868 | . . | Tool element selectively operative [2015-04] |
Y10T 83/7872 | . . | Tool element mounted for adjustment [2015-04] |
Y10T 83/7876 | . . . | Plural, axially spaced tool elements [2015-04] |
Y10T 83/788 | . | Tool pair comprises rotatable anvil and fixed-type tool [2015-04] |
Y10T 83/793 | . . | Anvil has motion in addition to rotation [i.e., traveling anvil] [2015-04] |
Y10T 83/798 | . . . | Additional motion is along fixed arcuate path [2015-04] |
Y10T 83/803 | . . . | With plural anvils [2015-04] |
Y10T 83/808 | . | Two tool pairs, driver for one pair moves relative to driver for other pair [2015-04] |
Y10T 83/811 | . . | One tool support acts as driver for other [2015-04] |
Y10T 83/814 | . . . | Punch and shear [2015-04] |
Y10T 83/817 | . . | With variable spacing between tool pairs [2015-04] |
Y10T 83/819 | . . . | With intermediate work support [2015-04] |
Y10T 83/822 | . . | Punch and shear [2015-04] |
Y10T 83/825 | . . | Successively acting [2015-04] |
Y10T 83/828 | . | With illuminating or viewing means for work [2015-04] |
Y10T 83/839 | . . | Mirror or lens [2015-04] |
Y10T 83/849 | . | With signal, scale, or indicator [2015-04] |
Y10T 83/85 | . . | Signal; e.g., alarm [2015-04] |
Y10T 83/851 | . . | Indicator comprising work or product [2015-04] |
Y10T 83/852 | . . | Responsive to force [2015-04] |
Y10T 83/853 | . . | Indicates tool position [2015-04] |
Y10T 83/855 | . . . | Relative to another element [2015-04] |
Y10T 83/856 | . . . . | To work-engaging member [2015-04] |
Y10T 83/857 | . . . . . | Calibrated scale or indicator [2015-04] |
Y10T 83/858 | . . . . . . | Indicates dimension of work being cut [2015-04] |
Y10T 83/859 | . . . . . . . | Dynamic indicator [2015-04] |
Y10T 83/86 | . . . . | To another tool assembly [2015-04] |
Y10T 83/861 | . . . . | To cooperating tool [2015-04] |
Y10T 83/862 | . . . . | To another component of tool assembly [2015-04] |
Y10T 83/863 | . . . . | Adjustable guide for traversing tool; e.g., radial saw guide or miter saw guide [2015-04] |
Y10T 83/865 | . . | Indicates work characteristic [2015-04] |
Y10T 83/866 | . . | Indicates wear [2015-04] |
Y10T 83/867 | . . | Bubble level [2015-04] |
Y10T 83/868 | . . | Counter [2015-04] |
Y10T 83/869 | . | Means to drive or to guide tool [2015-04] |
Y10T 83/8691 | . . | Unicyclic [2015-04] |
Y10T 83/8693 | . . . | With adjustable stopping point or tool [2015-04] |
Y10T 83/8694 | . . . | With brake or blocking means [2015-04] |
Y10T 83/8696 | . . | Means to change datum plane of tool or tool presser stroke [2015-04] |
Y10T 83/8697 | . . . | For disabling of continuously actuated cutter [2015-04] |
Y10T 83/8699 | . . . | With adjustable stop [2015-04] |
Y10T 83/87 | . . . | By varying length of tool stroke [2015-04] |
Y10T 83/8702 | . . | Clicker die press [2015-04] |
Y10T 83/8703 | . . . | With die handling attachment [2015-04] |
Y10T 83/8704 | . . . | With reciprocating presser [2015-04] |
Y10T 83/8706 | . . . . | Laterally movable to selective operative positions [2015-04] |
Y10T 83/8707 | . . . . . | Pivotal or revolving only [2015-04] |
Y10T 83/8709 | . . . . . . | With means to impart, limit, or control pivotal motion of presser [2015-04] |
Y10T 83/871 | . . . . . . . | Interrelated with presser reciprocating means [2015-04] |
Y10T 83/8712 | . . . . . . | With means to mount presser for oscillation about column [2015-04] |
Y10T 83/8713 | . . . . | With adjustable bed block [2015-04] |
Y10T 83/8714 | . . . . | Including presser member reinforcing, or flexure compensating, means [2015-04] |
Y10T 83/8716 | . . . . | With manually actuated control apparatus for reciprocation of presser member [2015-04] |
Y10T 83/8717 | . . | By deforming resilient tool or tool support [2015-04] |
Y10T 83/8719 | . . | With transmission yieldable on overload [2015-04] |
Y10T 83/872 | . . | With guard means [2015-04] |
Y10T 83/8722 | . . . | Static [2015-04] |
Y10T 83/8723 | . . . . | Adjustable [2015-04] |
Y10T 83/8725 | . . | Including movable, tool protecting, cushioning sheet [2015-04] |
Y10T 83/8726 | . . | Single tool with plural selective driving means [2015-04] |
Y10T 83/8727 | . . | Plural tools selectively engageable with single drive [2015-04] |
Y10T 83/8729 | . . . | Predetermined sequence of selection [2015-04] |
Y10T 83/873 | . . . . | Of paired tools [2015-04] |
Y10T 83/8732 | . . . | Turret of tools [2015-04] |
Y10T 83/8733 | . . | Tool movable to cooperate selectively with one of a plurality of mating tools [2015-04] |
Y10T 83/8735 | . . | With means providing for plural steps in tool stroke [2015-04] |
Y10T 83/8736 | . . | Sequential cutting motions [2015-04] |
Y10T 83/8737 | . . | With tool positioning means synchronized with cutting stroke [2015-04] |
Y10T 83/8739 | . . . | Anvil moves into and out of operative position [2015-04] |
Y10T 83/874 | . . . | Straight line positioning [2015-04] |
Y10T 83/8742 | . . | Tool pair positionable as a unit [2015-04] |
Y10T 83/8743 | . . . | Straight line positioning [2015-04] |
Y10T 83/8745 | . . | Tool and anvil relatively positionable [2015-04] |
Y10T 83/8746 | . . . | Straight line [2015-04] |
Y10T 83/8748 | . . | Tool displaceable to inactive position [e.g., for work loading] [2015-04] |
Y10T 83/8749 | . . . | By pivotal motion [2015-04] |
Y10T 83/875 | . . | With templet surface following tool [2015-04] |
Y10T 83/8752 | . . | Tool moves work to and against cooperating tool [2015-04] |
Y10T 83/8753 | . . . | With means to clamp or bind work to moving tool [2015-04] |
Y10T 83/8755 | . . . | One tool resiliently mounted or biased [2015-04] |
Y10T 83/8756 | . . . | Work forced through tool aperture or between spaced cooperating tools [2015-04] |
Y10T 83/8758 | . . . | Manually actuated work-moving tool [2015-04] |
Y10T 83/8759 | . . | With means to connect or disconnect tool and its drive [2015-04] |
Y10T 83/8761 | . . . | Continuously moving drive means [e.g., "gag"] [2015-04] |
Y10T 83/8762 | . . . . | Hand actuated connecting means [2015-04] |
Y10T 83/8763 | . . | Convertible from tool path to another or from implement to machine [2015-04] |
Y10T 83/8765 | . . | Magnet- or solenoid-actuated tool [2015-04] |
Y10T 83/8766 | . . . | Tool movement modifies actuating circuit [2015-04] |
Y10T 83/8768 | . . . | Solenoid core is tool or tool support [2015-04] |
Y10T 83/8769 | . . | Cutting tool operative in opposite directions of travel [2015-04] |
Y10T 83/8771 | . . | Motion direction of tool influenced by resistance of work [2015-04] |
Y10T 83/8772 | . . | One tool edge of tool pair encompasses work [e.g., wire cutter] [2015-04] |
Y10T 83/8773 | . . | Bevel or miter cut [2015-04] |
Y10T 83/8775 | . . | With tool tensioning means [2015-04] |
Y10T 83/8776 | . . | Constantly urged tool or tool support [e.g., spring biased] [2015-04] |
Y10T 83/8778 | . . . | Ledger blade [2015-04] |
Y10T 83/8779 | . . . | Oscillating tool urged axially [2015-04] |
Y10T 83/8781 | . . . . | And urged about pivotal axis [2015-04] |
Y10T 83/8782 | . . . | Stored energy furnishes cutting force [2015-04] |
Y10T 83/8784 | . . . . | With reset [2015-04] |
Y10T 83/8785 | . . . | Through return [noncutting] stroke [2015-04] |
Y10T 83/8786 | . . . . | Oscillating tool [2015-04] |
Y10T 83/8788 | . . | Tool return mechanism separate from tool advance mechanism [2015-04] |
Y10T 83/8789 | . . | With simple revolving motion only [2015-04] |
Y10T 83/8791 | . . . | Tool mounted on radial face of rotor [2015-04] |
Y10T 83/8792 | . . . | Variable speed during one revolution [e.g., intermittent] [2015-04] |
Y10T 83/8794 | . . . | Revolving tool moves through recess in work holder or cooperating tool [2015-04] |
Y10T 83/8795 | . . . . | Progressively cutting [2015-04] |
Y10T 83/8796 | . . . | Progressively cutting [2015-04] |
Y10T 83/8798 | . . | With simple oscillating motion only [2015-04] |
Y10T 83/8799 | . . . | Plural tool pairs [2015-04] |
Y10T 83/8801 | . . . . | Plural tools on single oscillating arm [i.e., tool holder] [2015-04] |
Y10T 83/8802 | . . . | And means to move cooperating cutter member [2015-04] |
Y10T 83/8804 | . . . | Tool driver movable relative to tool support [2015-04] |
Y10T 83/8805 | . . . . | Cam or eccentric revolving about fixed axis [2015-04] |
Y10T 83/8807 | . . . . | Gear or ratchet pawl drives toothed tool support [2015-04] |
Y10T 83/8808 | . . . . | Toggle links, one link pivoted to tool support [2015-04] |
Y10T 83/8809 | . . . . | Fixed axis lever [2015-04] |
Y10T 83/8811 | . . . . . | Adjustable mechanical advantage [2015-04] |
Y10T 83/8812 | . . . | Cutting edge in radial plane [2015-04] |
Y10T 83/8814 | . . . . | Adjustable [2015-04] |
Y10T 83/8815 | . . . . | With guide means for the cutting member [2015-04] |
Y10T 83/8817 | . . . | Axially entending cutting edge [2015-04] |
Y10T 83/8818 | . . . . | Axially progressing cut [2015-04] |
Y10T 83/882 | . . . . | Adjustable [2015-04] |
Y10T 83/8821 | . . | With simple rectilinear reciprocating motion only [2015-04] |
Y10T 83/8822 | . . . | Edge-to-edge of sheet or web [e.g., traveling cutter] [2015-04] |
Y10T 83/8824 | . . . | With provision for dynamic balance [2015-04] |
Y10T 83/8825 | . . . | With lost motion in tool drive [2015-04] |
Y10T 83/8827 | . . . | Means to vary force on, or speed of, tool during stroke [2015-04] |
Y10T 83/8828 | . . . | Plural tools with same drive means [2015-04] |
Y10T 83/883 | . . . . | Tools positioned by template [2015-04] |
Y10T 83/8831 | . . . . | Plural distinct cutting edges on same support [2015-04] |
Y10T 83/8832 | . . . . . | Concentrically mounted [2015-04] |
Y10T 83/8834 | . . . . . | Successively acting [2015-04] |
Y10T 83/8835 | . . . | And means to move cooperating cutting member [2015-04] |
Y10T 83/8837 | . . . | With application of force to opposite ends of tool supporting crosshead [2015-04] |
Y10T 83/8838 | . . . . | By relatively movable fixed axis levers [2015-04] |
Y10T 83/884 | . . . . | By connecting rod articulated with tool support [2015-04] |
Y10T 83/8841 | . . . | Tool driver movable relative to tool support [2015-04] |
Y10T 83/8843 | . . . . | Cam or eccentric revolving about fixed axis [2015-04] |
Y10T 83/8844 | . . . . | Gear actuated tool support [2015-04] |
Y10T 83/8845 | . . . . | Toggle links, one link pivoted to tool support [2015-04] |
Y10T 83/8847 | . . . . | Screw actuated tool support [2015-04] |
Y10T 83/8848 | . . . . | Connecting rod articulated with tool support [2015-04] |
Y10T 83/885 | . . . . | Fixed axis lever [2015-04] |
Y10T 83/8851 | . . . . . | Adjustable mechanical advantage [2015-04] |
Y10T 83/8853 | . . . . | Including details of guide for tool or tool support [2015-04] |
Y10T 83/8854 | . . . | Progressively cutting [2015-04] |
Y10T 83/8855 | . . . | With spaced guide pins [e.g., die set leader pins] [2015-04] |
Y10T 83/8857 | . . . | With inclined guides [2015-04] |
Y10T 83/8858 | . . . | Fluid pressure actuated [2015-04] |
Y10T 83/886 | . . . . | Utilizing fluid amplifier [2015-04] |
Y10T 83/8861 | . . . . | Diaphragm [2015-04] |
Y10T 83/8863 | . . . . | Explosive fluid [2015-04] |
Y10T 83/8864 | . . . . | Plural cylinders [2015-04] |
Y10T 83/8866 | . . . . | Offset cutter [2015-04] |
Y10T 83/8867 | . . . | With means to adjust tool position on tool holder [2015-04] |
Y10T 83/8868 | . . . . | Adjustably mounted cooperating tool [2015-04] |
Y10T 83/887 | . . | Parallel draw-cut [e.g., translatory] [2015-04] |
Y10T 83/8871 | . . . | Link suspension [2015-04] |
Y10T 83/8873 | . . | Straight line motion combined with tilting in plane of stroke [2015-04] |
Y10T 83/8874 | . . | Uniplanar compound motion [2015-04] |
Y10T 83/8876 | . . . | Reciprocating plus work approach [e.g., saw type] [2015-04] |
Y10T 83/8877 | . . . | With gyratory drive [2015-04] |
Y10T 83/8878 | . . | Guide [2015-04] |
Y10T 83/888 | . . . | With nonrigidly positioned member [2015-04] |
Y10T 83/8881 | . . . | With anti-friction means [2015-04] |
Y10T 83/8883 | . . . . | Roller with peripheral flange or groove [2015-04] |
Y10T 83/8884 | . . . . | Disc [2015-04] |
Y10T 83/8886 | . . . | With means to vary space between opposed members [2015-04] |
Y10T 83/8887 | . . . . | By rectilinear movement of member [2015-04] |
Y10T 83/8889 | . . . | With means to adjust position [2015-04] |
Y10T 83/889 | . | Tool with either work holder or means to hold work supply [2015-04] |
Y10T 83/896 | . . | Rotatable wound package supply [2015-04] |
Y10T 83/902 | . . . | Plural supply sources [2015-04] |
Y10T 83/909 | . | Cutter assemblage or cutter element therefor [e.g., chain saw chain] [2015-04] |
Y10T 83/913 | . . | With means permitting removal of cutter element [2015-04] |
Y10T 83/917 | . . | Having diverse cutting elements [2015-04] |
Y10T 83/921 | . . . | And noncutting depth gauge [2015-04] |
Y10T 83/925 | . . | Having noncutting depth gauge [2015-04] |
Y10T 83/929 | . | Tool or tool with support [2015-04] |
Y10T 83/9292 | . . | Wire tool [2015-04] |
Y10T 83/9295 | . . | Work supported tool [e.g., clicker die] [2015-04] |
Y10T 83/9297 | . . . | With product ejection facilitator [2015-04] |
Y10T 83/93 | . . . | With tool manipulating portion [2015-04] |
Y10T 83/9302 | . . . | With tool positioning abutment [2015-04] |
Y10T 83/9304 | . . . | To sever article from work and cut within article [2015-04] |
Y10T 83/9307 | . . . | With tool contour adjusting means [2015-04] |
Y10T 83/9309 | . . | Anvil [2015-04] |
Y10T 83/9312 | . . . | Rotatable type [2015-04] |
Y10T 83/9314 | . . | Pointed perforators [2015-04] |
Y10T 83/9317 | . . | Endless band or belt type [2015-04] |
Y10T 83/9319 | . . | Toothed blade or tooth therefor [2015-04] |
Y10T 83/9321 | . . . | With means to vary tooth position [2015-04] |
Y10T 83/9324 | . . . | With additional cutting means [2015-04] |
Y10T 83/9326 | . . . | Plural separable sections [2015-04] |
Y10T 83/9329 | . . . . | Tooth separable from blade [2015-04] |
Y10T 83/9331 | . . . . . | By independent connecting element [2015-04] |
Y10T 83/9333 | . . . . . . | Transversely movable [2015-04] |
Y10T 83/9336 | . . . . . . | Arcuately movable [2015-04] |
Y10T 83/9338 | . . . . . . . | With additional element to prevent movement of connecting element [2015-04] |
Y10T 83/9341 | . . . . . . | Rectilinearly movable [2015-04] |
Y10T 83/9343 | . . . . . | By deformation [2015-04] |
Y10T 83/9346 | . . . | Uniformly varying teeth or tooth spacing [2015-04] |
Y10T 83/9348 | . . . | Undulating tooth arrangement [2015-04] |
Y10T 83/935 | . . . | Plural tooth groups [2015-04] |
Y10T 83/9353 | . . . . | Including raker tooth group [2015-04] |
Y10T 83/9355 | . . . . | Including intermediate raker tooth [2015-04] |
Y10T 83/9358 | . . . | Series of dissimilar teeth [2015-04] |
Y10T 83/936 | . . . | Series of allochiral teeth [2015-04] |
Y10T 83/9362 | . . . | Teeth having transversely curved cutting edge [2015-04] |
Y10T 83/9365 | . . . | Teeth having cutting edge parallel to blade surface [2015-04] |
Y10T 83/9367 | . . . | Teeth having cutting edge perpendicular to blade surface [2015-04] |
Y10T 83/937 | . . | Tool mounted by and between spaced arms [2015-04] |
Y10T 83/9372 | . . | Rotatable type [2015-04] |
Y10T 83/9374 | . . . | With spacer interposed between shaft-mounted tools [2015-04] |
Y10T 83/9377 | . . . | Mounting of tool about rod-type shaft [2015-04] |
Y10T 83/9379 | . . . . | At end of shaft [2015-04] |
Y10T 83/9382 | . . . | Punching plus nonpunching tool [2015-04] |
Y10T 83/9384 | . . . | Notching plus nonnotching tool [2015-04] |
Y10T 83/9387 | . . . | Punching tool [2015-04] |
Y10T 83/9389 | . . . . | Shear type [2015-04] |
Y10T 83/9391 | . . . | Notching tool [2015-04] |
Y10T 83/9394 | . . . | Helical tool [2015-04] |
Y10T 83/9396 | . . . | Shear type [2015-04] |
Y10T 83/9399 | . . . . | Cutting edge wholly parallel to axis of rotation [2015-04] |
Y10T 83/9401 | . . . . | Cutting edge wholly normal to axis of rotation [2015-04] |
Y10T 83/9403 | . . . | Disc type [2015-04] |
Y10T 83/9406 | . . . | Radially adjustable tool [2015-04] |
Y10T 83/9408 | . . . | Spaced cut forming tool [2015-04] |
Y10T 83/9411 | . . | Cutting couple type [2015-04] |
Y10T 83/9413 | . . . | Spiral type cutter [2015-04] |
Y10T 83/9416 | . . . | To punch and cut punched article [2015-04] |
Y10T 83/9418 | . . . | Punching plus nonpunching tool [2015-04] |
Y10T 83/942 | . . . | Notching plus nonnotching tool [2015-04] |
Y10T 83/9423 | . . . | Punching tool [2015-04] |
Y10T 83/9425 | . . . . | Tool pair [2015-04] |
Y10T 83/9428 | . . . . | Shear-type male tool [2015-04] |
Y10T 83/943 | . . . . . | Multiple punchings [2015-04] |
Y10T 83/9432 | . . . . . | Plural spaced successively operative shearing portions [2015-04] |
Y10T 83/9435 | . . . . . | Progressive cutting [2015-04] |
Y10T 83/9437 | . . . . | Shear-type female tool [2015-04] |
Y10T 83/944 | . . . . | Multiple punchings [2015-04] |
Y10T 83/9442 | . . . | Notching tool [2015-04] |
Y10T 83/9444 | . . . . | Shear type [2015-04] |
Y10T 83/9447 | . . . | Shear type [2015-04] |
Y10T 83/9449 | . . . | Spaced cut forming tool [2015-04] |
Y10T 83/9452 | . . . | With tool contour adjusting means [2015-04] |
Y10T 83/9454 | . . | Reciprocable type [2015-04] |
Y10T 83/9457 | . . | Joint or connection [2015-04] |
Y10T 83/9459 | . . . | Magnetic connection [2015-04] |
Y10T 83/9461 | . . . | Resiliently biased connection [2015-04] |
Y10T 83/9464 | . . . | For rotary tool [2015-04] |
Y10T 83/9466 | . . . . | Flexible sleevelike tool [2015-04] |
Y10T 83/9469 | . . . . | Adjustable [2015-04] |
Y10T 83/9471 | . . . . . | Rectilinearly [2015-04] |
Y10T 83/9473 | . . . | For rectilinearly reciprocating tool [2015-04] |
Y10T 83/9476 | . . . . | Tool is single element with continuous cutting edge [e.g., punch, etc.] [2015-04] |
Y10T 83/9478 | . . . . | Tool is single element reciprocable generally perpendicularly to elongate cutting edge [e.g., shear, etc.] [2015-04] |
Y10T 83/9481 | . . . . | Tool is single element reciprocable along elongate cutting edge [e.g., saw blade, etc.] [2015-04] |
Y10T 83/9483 | . . . . | Adjustable [2015-04] |
Y10T 83/9486 | . . . . . | Rectilinearly [2015-04] |
Y10T 83/9488 | . . . | Adjustable [2015-04] |
Y10T 83/949 | . . . . | Rectilinearly [2015-04] |
Y10T 83/9493 | . . | Stationary cutter [2015-04] |
Y10T 83/9495 | . . . | Nonparallel cutting edges [2015-04] |
Y10T 83/9498 | . . . | Parallel cutting edges [2015-04] |
Y10T 83/95 | . | Machine frame [2015-04] |
Y10T 83/96 | . . | Guard [2015-04] |
Y10T 83/97 | . | Miscellaneous [2015-04] |
Former US Class 117 Series [2015-01] |
Y10T 117/00 | Single-crystal, oriented-crystal, and epitaxy growth processes; non-coating apparatus therefor [2015-01] |
Y10T 117/10 | . | Apparatus [2015-01] |
Y10T 117/1004 | . . | with means for measuring, testing, or sensing [2015-01] |
Y10T 117/1008 | . . . | with responsive control means [2015-01] |
Y10T 117/1012 | . . . | with a window or port for visual observation or examination [2015-01] |
Y10T 117/1016 | . . | with means for treating single-crystal [e.g., heat treating] [2015-01] |
Y10T 117/102 | . . | for forming a platelet shape or a small diameter, elongate, generally cylindrical shape [e.g., whisker, fiber, needle, filament] [2015-01] |
Y10T 117/1024 | . . | for crystallization from liquid or supercritical state [2015-01] |
Y10T 117/1028 | . . . | Crucibleless apparatus having means providing movement of discrete droplets or solid particles to thin-film precursor [e.g., Verneuil method] [2015-01] |
Y10T 117/1032 | . . . | Seed pulling [2015-01] |
Y10T 117/1036 | . . . . | including solid member shaping means other than seed or product [e.g., EDFG die] [2015-01] |
Y10T 117/104 | . . . . . | Means for forming a hollow structure [e.g., tube, polygon] [2015-01] |
Y10T 117/1044 | . . . . . | including means forming a flat shape [e.g., ribbon] [2015-01] |
Y10T 117/1048 | . . . . . . | Pulling includes a horizontal component [2015-01] |
Y10T 117/1052 | . . . . | including a sectioned crucible [e.g., double crucible, baffle] [2015-01] |
Y10T 117/1056 | . . . . | including details of precursor replenishment [2015-01] |
Y10T 117/106 | . . . . | including sealing means details [2015-01] |
Y10T 117/1064 | . . . . | including a fully-sealed or vacuum-maintained crystallization chamber [e.g., ampoule] [2015-01] |
Y10T 117/1068 | . . . . | including heating or cooling details [e.g., shield configuration] [2015-01] |
Y10T 117/1072 | . . . . | including details of means providing product movement [e.g., shaft guides, servo means] [2015-01] |
Y10T 117/1076 | . . . | having means for producing a moving solid-liquid-solid zone [2015-01] |
Y10T 117/108 | . . . . | Including a solid member other than seed or product contacting the liquid [e.g., crucible, immersed heating element] [2015-01] |
Y10T 117/1084 | . . . . | having details of a stabilizing feature [2015-01] |
Y10T 117/1088 | . . . . | including heating or cooling details [2015-01] |
Y10T 117/1092 | . . . | Shape defined by a solid member other than seed or product [e.g., Bridgman-Stockbarger] [2015-01] |
Y10T 117/1096 | . . . | including pressurized crystallization means [e.g., hydrothermal] [2015-01] |
Former US Class 137 series [2015-04] |
Y10T 137/00 | Fluid handling [2015-04] |
Y10T 137/0318 | . | Processes [2015-04] |
Y10T 137/0324 | . . | With control of flow by a condition or characteristic of a fluid [2015-04] |
Y10T 137/0329 | . . . | Mixing of plural fluids of diverse characteristics or conditions [2015-04] |
Y10T 137/0335 | . . . . | Controlled by consistency of mixture [2015-04] |
Y10T 137/034 | . . . . | Controlled by conductivity of mixture [2015-04] |
Y10T 137/0346 | . . . . | Controlled by heat of combustion of mixture [2015-04] |
Y10T 137/0352 | . . . . | Controlled by pressure [2015-04] |
Y10T 137/0357 | . . . | For producing uniform flow [2015-04] |
Y10T 137/0363 | . . . | For producing proportionate flow [2015-04] |
Y10T 137/0368 | . . . | By speed of fluid [2015-04] |
Y10T 137/0374 | . . . | For regulating boiler feed water level [2015-04] |
Y10T 137/0379 | . . . | By fluid pressure [2015-04] |
Y10T 137/0385 | . . | Carbonated beverage handling processes [2015-04] |
Y10T 137/0391 | . . | Affecting flow by the addition of material or energy [2015-04] |
Y10T 137/0396 | . . | Involving pressure control [2015-04] |
Y10T 137/0402 | . . | Cleaning, repairing, or assembling [2015-04] |
Y10T 137/0407 | . . . | Repairing or assembling hydrant [e.g., fireplug, etc.] [2015-04] |
Y10T 137/0413 | . . . | Gas or water meter repairing or assembling [2015-04] |
Y10T 137/0419 | . . . | Fluid cleaning or flushing [2015-04] |
Y10T 137/0424 | . . . . | Liquid cleaning or flushing [2015-04] |
Y10T 137/043 | . . . . . | Valve or valve seat cleaning [2015-04] |
Y10T 137/0435 | . . . | Mechanical cleaning [e.g., pig, etc.] [2015-04] |
Y10T 137/0441 | . . . | Repairing, securing, replacing, or servicing pipe joint, valve, or tank [2015-04] |
Y10T 137/0447 | . . . . | Including joint or coupling [2015-04] |
Y10T 137/0452 | . . . . | Detecting or repairing leak [2015-04] |
Y10T 137/0458 | . . . . | Tapping pipe, keg, or tank [2015-04] |
Y10T 137/0463 | . . . . . | Particular aperture forming means [2015-04] |
Y10T 137/0469 | . . . . . . | Cutter or cutting tool [2015-04] |
Y10T 137/0475 | . . . . . . | Having deformable or inflatable means [2015-04] |
Y10T 137/048 | . . . . | With content loading or unloading [e.g., dispensing, discharge assistant, etc.] [2015-04] |
Y10T 137/0486 | . . . . | Specific valve or valve element mounting or repairing [2015-04] |
Y10T 137/0491 | . . . | Valve or valve element assembling, disassembling, or replacing [2015-04] |
Y10T 137/0497 | . . . . | Fluid actuated or retarded [2015-04] |
Y10T 137/0502 | . . . . | Multi way valve [2015-04] |
Y10T 137/0508 | . . . . | Ball valve or rotary ball valve [2015-04] |
Y10T 137/0514 | . . . . | Gate valve [2015-04] |
Y10T 137/0519 | . . . . | Plug valve [2015-04] |
Y10T 137/0525 | . . . . | Butterfly valve [2015-04] |
Y10T 137/053 | . . . . | Float valve [2015-04] |
Y10T 137/0536 | . | Highspeed fluid intake means [e.g., jet engine intake] [2015-04] |
Y10T 137/0645 | . . | With condition responsive control means [2015-04] |
Y10T 137/0753 | . | Control by change of position or inertia of system [2015-04] |
Y10T 137/0777 | . . | With second control [2015-04] |
Y10T 137/0801 | . . | Position relative body of water [e.g., marine governors] [2015-04] |
Y10T 137/0826 | . . . | Float controlled [2015-04] |
Y10T 137/085 | . . . | Pressure or head controlled [2015-04] |
Y10T 137/0874 | . . | Vent opening or closing on tipping container [2015-04] |
Y10T 137/0898 | . . | By shifting of liquid level [2015-04] |
Y10T 137/0923 | . . | By pendulum or swinging member [2015-04] |
Y10T 137/0947 | . . . | With servo connection to valve [2015-04] |
Y10T 137/0971 | . | Speed responsive valve control [2015-04] |
Y10T 137/0989 | . . | Acceleration responsive valve control [2015-04] |
Y10T 137/1007 | . . | With manual valve control [2015-04] |
Y10T 137/1026 | . . | Speed change and excess speed valve control [2015-04] |
Y10T 137/1044 | . . | With other condition responsive valve control [2015-04] |
Y10T 137/1062 | . . . | Governor drive failure responsive [2015-04] |
Y10T 137/108 | . . | Centrifugal mass type [exclusive of liquid] [2015-04] |
Y10T 137/1098 | . . . | With multiple valves [2015-04] |
Y10T 137/1116 | . . . | Periodically actuated valve [2015-04] |
Y10T 137/1135 | . . . | Rotating valve and rotating governor [2015-04] |
Y10T 137/1153 | . . . | Excess speed responsive [2015-04] |
Y10T 137/1171 | . . . | With fluid servo-motor [2015-04] |
Y10T 137/1189 | . | Freeze condition responsive safety systems [2015-04] |
Y10T 137/1244 | . . | With freeze waste [2015-04] |
Y10T 137/1298 | . . | Stop and waste [2015-04] |
Y10T 137/1353 | . . | Low temperature responsive drains [2015-04] |
Y10T 137/1407 | . | Combustion failure responsive fuel safety cut-off for burners [2015-04] |
Y10T 137/1516 | . . | Thermo-electric [2015-04] |
Y10T 137/1624 | . | Destructible or deformable element controlled [2015-04] |
Y10T 137/1632 | . . | Destructible element [2015-04] |
Y10T 137/1639 | . . . | Combined destructible and fusible element [2015-04] |
Y10T 137/1647 | . . . | Explosive actuation [2015-04] |
Y10T 137/1654 | . . . | Separable valve coupling or conduit [2015-04] |
Y10T 137/1662 | . . . . | Tensile or sheer pin or bolt [2015-04] |
Y10T 137/1669 | . . . | Tensile or sheer pin or bolt [2015-04] |
Y10T 137/1677 | . . . . | Pressure causes pin or bolt to destruct [2015-04] |
Y10T 137/1684 | . . . | With alarm or indicator [2015-04] |
Y10T 137/1692 | . . . | Rupture disc [2015-04] |
Y10T 137/1699 | . . . . | Means for holding entire disc after rupture [2015-04] |
Y10T 137/1707 | . . . . | Disc burst after destruction of additional element [2015-04] |
Y10T 137/1714 | . . . . | Direct pressure causes disc to burst [2015-04] |
Y10T 137/1722 | . . . . . | Two-way rupture disc [2015-04] |
Y10T 137/1729 | . . . . . | Dome shape [2015-04] |
Y10T 137/1737 | . . . . . . | Reverse buckling [2015-04] |
Y10T 137/1744 | . . . . | Specific weakening point [2015-04] |
Y10T 137/1752 | . . . . | Integral disc assembly [2015-04] |
Y10T 137/1759 | . . . . | Knife or cutter causes disc to break [2015-04] |
Y10T 137/1767 | . . . . . | Movable knife or cutter [2015-04] |
Y10T 137/1774 | . . . | With counterbalancing element [2015-04] |
Y10T 137/1782 | . . . | Frangible element returns pressure responsive valve [2015-04] |
Y10T 137/1789 | . . . | Having pressure responsive valve [2015-04] |
Y10T 137/1797 | . . | Heat destructible or fusible [2015-04] |
Y10T 137/1804 | . . . | With second sensing means [2015-04] |
Y10T 137/1812 | . . . | In fluid flow path [2015-04] |
Y10T 137/1819 | . . . | Safety cut-off [2015-04] |
Y10T 137/1827 | . . . . | With heater for destructible or fusible element [2015-04] |
Y10T 137/1834 | . . . . | With external closing means [2015-04] |
Y10T 137/1842 | . | Ambient condition change responsive [2015-04] |
Y10T 137/1866 | . . | For controlling soil irrigation [2015-04] |
Y10T 137/189 | . . . | Soil moisture sensing [2015-04] |
Y10T 137/1915 | . . | Burner gas cutoff [2015-04] |
Y10T 137/1939 | . . | Atmospheric [2015-04] |
Y10T 137/1963 | . . . | Temperature [2015-04] |
Y10T 137/1987 | . . . . | With additional diverse control [2015-04] |
Y10T 137/2012 | . . . | Pressure [2015-04] |
Y10T 137/2036 | . . | Underwater [2015-04] |
Y10T 137/206 | . | Flow affected by fluid contact, energy field or coanda effect [e.g., pure fluid device or system] [2015-04] |
Y10T 137/2065 | . . | Responsive to condition external of system [2015-04] |
Y10T 137/2071 | . . . | And causing change or correction of sensed condition [2015-04] |
Y10T 137/2076 | . . | Utilizing diverse fluids [2015-04] |
Y10T 137/2082 | . . | Utilizing particular fluid [2015-04] |
Y10T 137/2087 | . . | Means to cause rotational flow of fluid [e.g., vortex generator] [2015-04] |
Y10T 137/2093 | . . . | Plural vortex generators [2015-04] |
Y10T 137/2098 | . . . | Vortex generator as control for system [2015-04] |
Y10T 137/2104 | . . . | Vortex generator in interaction chamber of device [2015-04] |
Y10T 137/2109 | . . . | By tangential input to axial output [e.g., vortex amplifier] [2015-04] |
Y10T 137/2115 | . . . . | With means to vary input or output of device [2015-04] |
Y10T 137/212 | . . | System comprising plural fluidic devices or stages [2015-04] |
Y10T 137/2125 | . . . | Plural power inputs [e.g., parallel inputs] [2015-04] |
Y10T 137/2131 | . . . . | Variable or different-value power inputs [2015-04] |
Y10T 137/2136 | . . . . . | Pulsating power input and continuous-flow power input [2015-04] |
Y10T 137/2142 | . . . . | With variable or selectable source of control-input signal [2015-04] |
Y10T 137/2147 | . . . . | To cascaded plural devices [2015-04] |
Y10T 137/2153 | . . . . . | With feedback passage[s] between devices of cascade [2015-04] |
Y10T 137/2158 | . . . . . | With pulsed control-input signal [2015-04] |
Y10T 137/2164 | . . | Plural power inputs to single device [2015-04] |
Y10T 137/2169 | . . . | Intersecting at interaction region [e.g., comparator] [2015-04] |
Y10T 137/2174 | . . . . | Co-lineal, oppositely-directed power inputs [e.g., impact modulator] [2015-04] |
Y10T 137/218 | . . | Means to regulate or vary operation of device [2015-04] |
Y10T 137/2185 | . . . | To vary frequency of pulses or oscillations [2015-04] |
Y10T 137/2191 | . . . | By non-fluid energy field affecting input [e.g., transducer] [2015-04] |
Y10T 137/2196 | . . . . | Acoustical or thermal energy [2015-04] |
Y10T 137/2202 | . . . | By movable element [2015-04] |
Y10T 137/2207 | . . . . | Operating at timed intervals [e.g., to produce pulses] [2015-04] |
Y10T 137/2213 | . . . . | Electrically-actuated element [e.g., electro-mechanical transducer] [2015-04] |
Y10T 137/2218 | . . . . | Means [e.g., valve] in control input [2015-04] |
Y10T 137/2224 | . . | Structure of body of device [2015-04] |
Y10T 137/2229 | . . | Device including passages having V over T configuration [2015-04] |
Y10T 137/2234 | . . . | And feedback passage[s] or path[s] [2015-04] |
Y10T 137/224 | . . . | With particular characteristics of control input [2015-04] |
Y10T 137/2245 | . . . . | Multiple control-input passages [2015-04] |
Y10T 137/2251 | . . . | And multiple or joined power-outlet passages [2015-04] |
Y10T 137/2256 | . . . | And enlarged interaction chamber [2015-04] |
Y10T 137/2262 | . . . | And vent passage[s] [2015-04] |
Y10T 137/2267 | . . | Device including passages having V over gamma configuration [2015-04] |
Y10T 137/2273 | . . | Device including linearly-aligned power stream emitter and power stream collector [2015-04] |
Y10T 137/2278 | . | Pressure modulating relays or followers [2015-04] |
Y10T 137/2322 | . . | Jet control type [2015-04] |
Y10T 137/2365 | . . | Plural series units [2015-04] |
Y10T 137/2409 | . . | With counter-balancing pressure feedback to the modulating device [2015-04] |
Y10T 137/2452 | . . . | With counter-counter balancing pressure feedback [2015-04] |
Y10T 137/2496 | . | Self-proportioning or correlating systems [2015-04] |
Y10T 137/2499 | . . | Mixture condition maintaining or sensing [2015-04] |
Y10T 137/2501 | . . . | Dividing and recombining flow [2015-04] |
Y10T 137/2504 | . . . | By specific gravity [2015-04] |
Y10T 137/2506 | . . . | By viscosity or consistency [2015-04] |
Y10T 137/2509 | . . . | By optical or chemical property [2015-04] |
Y10T 137/2511 | . . | Fuel controlled by boiler or water system condition [2015-04] |
Y10T 137/2514 | . . | Self-proportioning flow systems [2015-04] |
Y10T 137/2516 | . . . | Interconnected flow displacement elements [2015-04] |
Y10T 137/2519 | . . . . | Movable trap chamber [2015-04] |
Y10T 137/2521 | . . . | Flow comparison or differential response [2015-04] |
Y10T 137/2524 | . . . . | Flow dividers [e.g., reversely acting controls] [2015-04] |
Y10T 137/2526 | . . . . | Main line flow displaces or entrains material from reservoir [2015-04] |
Y10T 137/2529 | . . . . | With electrical controller [2015-04] |
Y10T 137/2531 | . . . | Flow displacement element actuates electrical controller [2015-04] |
Y10T 137/2534 | . . . | Liquid level response [2015-04] |
Y10T 137/2536 | . . . . | Float controlled weir or valve [2015-04] |
Y10T 137/2539 | . . . . | Swinging outlet pipe controller [2015-04] |
Y10T 137/2541 | . . . | With measuring type discharge assistant [2015-04] |
Y10T 137/2544 | . . | Supply and exhaust type [2015-04] |
Y10T 137/2546 | . . . | Vacuum or suction pulsator type [e.g., milking machine] [2015-04] |
Y10T 137/2549 | . . . . | With trip linkage or snap action [2015-04] |
Y10T 137/2552 | . . . . | With pulsation responsive pilot valve [2015-04] |
Y10T 137/2554 | . . . | Reversing or 4-way valve systems [2015-04] |
Y10T 137/2557 | . . . | Waste responsive to flow stoppage [2015-04] |
Y10T 137/2559 | . . | Self-controlled branched flow systems [2015-04] |
Y10T 137/2562 | . . . | Dividing and recombining [2015-04] |
Y10T 137/2564 | . . . | Plural inflows [2015-04] |
Y10T 137/2567 | . . . . | Alternate or successive inflows [2015-04] |
Y10T 137/2569 | . . . . . | Control by depletion of source [2015-04] |
Y10T 137/2572 | . . . . | One inflow supplements another [2015-04] |
Y10T 137/2574 | . . . | Bypass or relief controlled by main line fluid condition [2015-04] |
Y10T 137/2577 | . . . . | Liquid level responsive [2015-04] |
Y10T 137/2579 | . . . . | Flow rate responsive [2015-04] |
Y10T 137/2582 | . . . . . | Including controlling main line flow [2015-04] |
Y10T 137/2584 | . . . . . . | Relief or bypass closes as main opens [2015-04] |
Y10T 137/2587 | . . . . . | Bypass or relief valve biased open [2015-04] |
Y10T 137/2589 | . . . . . | Pilot valve operated [2015-04] |
Y10T 137/2592 | . . . . . | Carried choke [2015-04] |
Y10T 137/2594 | . . . . . | Choke [2015-04] |
Y10T 137/2597 | . . . . . . | Variable choke resistance [2015-04] |
Y10T 137/2599 | . . . . . | Venturi [2015-04] |
Y10T 137/2602 | . . . . . | Flapper [2015-04] |
Y10T 137/2605 | . . . . | Pressure responsive [2015-04] |
Y10T 137/2607 | . . . . . | With pressure reducing inlet valve [2015-04] |
Y10T 137/261 | . . . . . . | Relief port through common sensing means [2015-04] |
Y10T 137/2612 | . . . . . | Common sensor for both bypass or relief valve and other branch valve [2015-04] |
Y10T 137/2615 | . . . . . . | Bypass or relief valve opens as other branch valve closes [2015-04] |
Y10T 137/2617 | . . . . . | Bypass or relief valve biased open [2015-04] |
Y10T 137/262 | . . . . . . | Increasing pressure progressively closes then reopens by-pass or relief valve [2015-04] |
Y10T 137/2622 | . . . . . | Bypass or relief valve responsive to pressure downstream of outlet valve [2015-04] |
Y10T 137/2625 | . . . . . . | Pilot valve [2015-04] |
Y10T 137/2627 | . . . . . . | Outlet valve carried by bypass or relief valve [2015-04] |
Y10T 137/263 | . . . . . | Plural sensors for single bypass or relief valve [2015-04] |
Y10T 137/2632 | . . . . . . | Sensors interconnected by timing or restrictive orifice [2015-04] |
Y10T 137/2635 | . . . . . | Pilot valve operated [2015-04] |
Y10T 137/2637 | . . . . . | Mechanical movement between sensor and valve [2015-04] |
Y10T 137/264 | . . . . . | Electrical control [2015-04] |
Y10T 137/2642 | . . . . . | Sensor rigid with valve [2015-04] |
Y10T 137/2645 | . . . . . . | Flexible sensor [2015-04] |
Y10T 137/2647 | . . . . . . | Pressure responsive outlet valve [2015-04] |
Y10T 137/265 | . . . | Plural outflows [2015-04] |
Y10T 137/2652 | . . . . | Single actuator operates plural outlets simultaneously [2015-04] |
Y10T 137/2655 | . . . . | Biased open isolation valve [2015-04] |
Y10T 137/2657 | . . . . | Flow rate responsive [2015-04] |
Y10T 137/266 | . . . . . | Primer valve [2015-04] |
Y10T 137/2663 | . . . . | Pressure responsive [2015-04] |
Y10T 137/2665 | . . . . . | With external control for correlating valve [e.g., manual] [2015-04] |
Y10T 137/2668 | . . . . | Alternately or successively substituted outflow [2015-04] |
Y10T 137/267 | . . . . . | Control by filling auxiliary gravitating or float operating tank [2015-04] |
Y10T 137/2673 | . . . . . | Control by filling outlet tank or receiver [2015-04] |
Y10T 137/2675 | . . . . . . | Float controlled [2015-04] |
Y10T 137/2678 | . . . . . | Four port reversing valve [2015-04] |
Y10T 137/268 | . . . . . | Responsive to pressure or flow interruption [2015-04] |
Y10T 137/2683 | . . . . . . | Plural outlets control with automatic reset [2015-04] |
Y10T 137/2685 | . . . . . . | Manually set to a single outflow position [2015-04] |
Y10T 137/2688 | . . . . . | Flow rate responsive [2015-04] |
Y10T 137/269 | . . . . . . | Flow sensing turbine [2015-04] |
Y10T 137/2693 | . . . . . | Pressure responsive [2015-04] |
Y10T 137/2695 | . . . . . . | Responsive to outlet pressure [2015-04] |
Y10T 137/2698 | . . . . . | Electrical control [2015-04] |
Y10T 137/27 | . . | Liquid level responsive [2015-04] |
Y10T 137/2703 | . . | Flow rate responsive [2015-04] |
Y10T 137/2705 | . . . | Pressure differential [2015-04] |
Y10T 137/2708 | . . | Plural sensors [2015-04] |
Y10T 137/271 | . . . | For single valve [2015-04] |
Y10T 137/2713 | . | Siphons [2015-04] |
Y10T 137/272 | . . | Plural [2015-04] |
Y10T 137/2727 | . . . | Tank truck mounted [2015-04] |
Y10T 137/2733 | . . . | Sequentially discharging in parallel [2015-04] |
Y10T 137/274 | . . . . | From plural tanks [2015-04] |
Y10T 137/2747 | . . . | Main siphon with auxiliary starting, stopping or resetting siphon [2015-04] |
Y10T 137/2754 | . . . . | Sinking or bucket-type float operated main siphon, float emptying auxiliary siphon [2015-04] |
Y10T 137/2761 | . . | With discharge-controlling receiver [2015-04] |
Y10T 137/2768 | . . . | With float [2015-04] |
Y10T 137/2774 | . . | Periodic or accumulation responsive discharge [2015-04] |
Y10T 137/2781 | . . . | With manual control [2015-04] |
Y10T 137/2788 | . . . | Control by filling auxiliary tank [2015-04] |
Y10T 137/2795 | . . . | Float-operated inlet to siphon [2015-04] |
Y10T 137/2802 | . . . | Release of trapped air [2015-04] |
Y10T 137/2808 | . . . . | Through float-operated vent [2015-04] |
Y10T 137/2815 | . . . . | Through liquid trap seal [2015-04] |
Y10T 137/2822 | . . . . . | Auxiliary liquid trap seal [2015-04] |
Y10T 137/2829 | . . | With strainer, filter, separator or sediment trap [2015-04] |
Y10T 137/2836 | . . | With recorder, register, signal, indicator or inspection window [2015-04] |
Y10T 137/2842 | . . | With flow starting, stopping or maintaining means [2015-04] |
Y10T 137/2849 | . . . | Siphon venting or breaking [2015-04] |
Y10T 137/2856 | . . . | With leakage or entrained air removal [2015-04] |
Y10T 137/2863 | . . . | Pressure applied to liquid in supply chamber [2015-04] |
Y10T 137/287 | . . . | Plunge or immersion starting [2015-04] |
Y10T 137/2877 | . . . | Pump or liquid displacement device for flow passage [2015-04] |
Y10T 137/2883 | . . . . | Piston [2015-04] |
Y10T 137/289 | . . . . . | Co-axial within flow passage [2015-04] |
Y10T 137/2897 | . . . . | Collapsible bulb [2015-04] |
Y10T 137/2904 | . . . | Siphon inlet movable to and from seat [2015-04] |
Y10T 137/2911 | . . . | With valve or closure in-flow passage [2015-04] |
Y10T 137/2917 | . . | With means for mounting and/or positioning relative to siphon chamber [2015-04] |
Y10T 137/2924 | . . | Elements [2015-04] |
Y10T 137/2931 | . | Diverse fluid containing pressure systems [2015-04] |
Y10T 137/2934 | . . | Gas lift valves for wells [2015-04] |
Y10T 137/2937 | . . | Gas pressure discharge of liquids feed traps [e.g., to boiler] [2015-04] |
Y10T 137/294 | . . . | Gas pressure controlled by amount of liquids in boiler or discharge receiver [2015-04] |
Y10T 137/2943 | . . . . | Pressure connection at liquid level in boiler or discharge receiver [2015-04] |
Y10T 137/2947 | . . . | Gas pressure controlled by amount of liquid in trap [2015-04] |
Y10T 137/295 | . . . . | Plural trap chambers [2015-04] |
Y10T 137/2953 | . . . . . | Gravitating [2015-04] |
Y10T 137/2956 | . . . . | Gravitating vessel [2015-04] |
Y10T 137/2959 | . . . . . | Sinking or bucket type float [2015-04] |
Y10T 137/2962 | . . . . . | Pivoted vessel with fluid passage through pivot [2015-04] |
Y10T 137/2965 | . . . . | Float responsive [2015-04] |
Y10T 137/2968 | . . . . . | Liquid control valve positively actuated [2015-04] |
Y10T 137/2971 | . . . . . | Gas condensing type [2015-04] |
Y10T 137/2975 | . . . . . | Gas inlet and outlet valves unitary [2015-04] |
Y10T 137/2978 | . . . | Gas pressure controlled by manual or cyclic means [2015-04] |
Y10T 137/2981 | . . . . | Movable trap chamber [2015-04] |
Y10T 137/2984 | . . | Foam control in gas charged liquids [2015-04] |
Y10T 137/2987 | . . . | Level or pressure responsive [2015-04] |
Y10T 137/299 | . . . | Separate handling of foam [2015-04] |
Y10T 137/2993 | . . . | With conditioning trap or chamber [2015-04] |
Y10T 137/2996 | . . . . | Recarbonation [2015-04] |
Y10T 137/30 | . . . . | With trap or chamber by-pass [2015-04] |
Y10T 137/3003 | . . | Fluid separating traps or vents [2015-04] |
Y10T 137/3006 | . . . | Liquids separated from liquid [2015-04] |
Y10T 137/3009 | . . . | Plural discriminating outlets for diverse fluids [2015-04] |
Y10T 137/3012 | . . . . | Common actuator for control valves [2015-04] |
Y10T 137/3015 | . . . . | Choke or restricted passage gas bleed [2015-04] |
Y10T 137/3018 | . . . . . | From above liquid level [2015-04] |
Y10T 137/3021 | . . . | Discriminating outlet for liquid [2015-04] |
Y10T 137/3024 | . . . . | With alternately operated inlet and outlet valves [2015-04] |
Y10T 137/3028 | . . . . | With non-discriminating gas vent or liquid discharge [2015-04] |
Y10T 137/3031 | . . . . . | Abnormal pressure responsive liquid blow-off or drain [2015-04] |
Y10T 137/3034 | . . . . . | Manual control [2015-04] |
Y10T 137/3037 | . . . . | With auxiliary inlet or by-pass valve [2015-04] |
Y10T 137/304 | . . . . | With fluid responsive valve [2015-04] |
Y10T 137/3043 | . . . . . | Successively opened valves [2015-04] |
Y10T 137/3046 | . . . . . | Gas collecting float [e.g., inverted bucket] [2015-04] |
Y10T 137/3049 | . . . . . . | Downstream from valve [2015-04] |
Y10T 137/3052 | . . . . . | Level responsive [2015-04] |
Y10T 137/3056 | . . . . . . | Weight or pressure [2015-04] |
Y10T 137/3059 | . . . . . . . | Gravitating vessel [2015-04] |
Y10T 137/3062 | . . . . . . . . | Sinking or bucket type float [2015-04] |
Y10T 137/3065 | . . . . . . . . . | Servo-control [2015-04] |
Y10T 137/3068 | . . . . . . | Float [2015-04] |
Y10T 137/3071 | . . . . . . . | With main line gas outlet from trap chamber [2015-04] |
Y10T 137/3074 | . . . . . . . | With outlet extending above liquid in trap [2015-04] |
Y10T 137/3077 | . . . . . . . | Servo-control [2015-04] |
Y10T 137/308 | . . . . . . . | With pressure balanced outlet valve [2015-04] |
Y10T 137/3084 | . . . | Discriminating outlet for gas [2015-04] |
Y10T 137/3087 | . . . . | With reverse flow stop or pressure regulating valve [2015-04] |
Y10T 137/309 | . . . . | Fluid sensing valve [2015-04] |
Y10T 137/3093 | . . . . . | With vaporized liquid stop [2015-04] |
Y10T 137/3096 | . . . . . . | With separate return for condensate [2015-04] |
Y10T 137/3099 | . . . . . | Float responsive [2015-04] |
Y10T 137/3102 | . . . | With liquid emptying means [2015-04] |
Y10T 137/3105 | . . . . | Self-emptying [2015-04] |
Y10T 137/3109 | . . | Liquid filling by evacuating container [2015-04] |
Y10T 137/3112 | . . | Main line flow displaces additive from shunt reservoir [2015-04] |
Y10T 137/3115 | . . | Gas pressure storage over or displacement of liquid [2015-04] |
Y10T 137/3118 | . . . | Surge suppression [2015-04] |
Y10T 137/3121 | . . . | With return of liquid to supply [2015-04] |
Y10T 137/3124 | . . . | Plural units [2015-04] |
Y10T 137/3127 | . . . | With gas maintenance or application [2015-04] |
Y10T 137/313 | . . . . | Gas carried by or evolved from liquid [2015-04] |
Y10T 137/3133 | . . . . . | Gas injectors [2015-04] |
Y10T 137/3137 | . . . . | Gas injected by liquid pressure or flow [2015-04] |
Y10T 137/314 | . . . . | Unitary mounting for gas pressure inlet and liquid outlet [2015-04] |
Y10T 137/3143 | . . . | With liquid level responsive gas vent or whistle [2015-04] |
Y10T 137/3146 | . . . . | Combined high and low level responsive [2015-04] |
Y10T 137/3149 | . | Back flow prevention by vacuum breaking [e.g., anti-siphon devices] [2015-04] |
Y10T 137/3185 | . . | Air vent in liquid flow line [2015-04] |
Y10T 137/3222 | . . . | With liquid seal in liquid flow line [2015-04] |
Y10T 137/3258 | . . . . | Automatic valve in vent line [2015-04] |
Y10T 137/3294 | . . . | Valved [2015-04] |
Y10T 137/3331 | . . . . | With co-acting valve in liquid flow path [2015-04] |
Y10T 137/3367 | . | Larner-Johnson type valves; i.e., telescoping internal valve in expanded flow line section [2015-04] |
Y10T 137/3421 | . . | Line condition change responsive [2015-04] |
Y10T 137/3476 | . . | Internal servo-motor with internal pilot valve [2015-04] |
Y10T 137/353 | . . . | Pilot controlled passage in nose or needle [2015-04] |
Y10T 137/3584 | . | Inflatable article [e.g., tire filling chuck and/or stem] [2015-04] |
Y10T 137/36 | . . | With pressure-responsive pressure-control means [2015-04] |
Y10T 137/3615 | . . . | Pulsating [2015-04] |
Y10T 137/3631 | . . . | Diaphragm, bellows or expansible tube [2015-04] |
Y10T 137/3646 | . . . | Co-axial inflation and relief valves [2015-04] |
Y10T 137/3662 | . . | With gauge or indicator [2015-04] |
Y10T 137/3677 | . . . | With deflating means [2015-04] |
Y10T 137/3693 | . . . | Selectively connected [2015-04] |
Y10T 137/3709 | . . | Stem attached relief valve [2015-04] |
Y10T 137/3724 | . . | With coupling means [2015-04] |
Y10T 137/374 | . . | With cap [2015-04] |
Y10T 137/3755 | . . . | Valve actuating, assembling or locking means on cap [2015-04] |
Y10T 137/3771 | . . . . | Valve manually seated [2015-04] |
Y10T 137/3786 | . . | Removable valve head and seat unit [valve insides] [2015-04] |
Y10T 137/3802 | . | With vehicle guide or support, e.g., service station [2015-04] |
Y10T 137/402 | . | Distribution systems involving geographic features [2015-04] |
Y10T 137/4238 | . | With cleaner, lubrication added to fluid or liquid sealing at valve interface [2015-04] |
Y10T 137/4245 | . . | Cleaning or steam sterilizing [2015-04] |
Y10T 137/4252 | . . . | Reverse fluid flow [2015-04] |
Y10T 137/4259 | . . . | With separate material addition [2015-04] |
Y10T 137/4266 | . . . | Steam sterilizing [2015-04] |
Y10T 137/4273 | . . . | Mechanical cleaning [2015-04] |
Y10T 137/428 | . . . . | Valve grinding motion of valve on seat [2015-04] |
Y10T 137/4287 | . . . . . | Concentric stem [2015-04] |
Y10T 137/4294 | . . . . . | Spring pressed [2015-04] |
Y10T 137/4301 | . . . . . | Lost motion permits grinding [2015-04] |
Y10T 137/4308 | . . . . . | With swivel-preventing means [2015-04] |
Y10T 137/4315 | . . . . . | Nut releasable from body and/or stem [2015-04] |
Y10T 137/4322 | . . . . . | With independent grinding actuator [2015-04] |
Y10T 137/4329 | . . . . . . | Separable [2015-04] |
Y10T 137/4336 | . . . . | Cleaning member reciprocates in passage [2015-04] |
Y10T 137/4343 | . . . . . | By-pass cleaning [2015-04] |
Y10T 137/4351 | . . . . . | Independent actuation [2015-04] |
Y10T 137/4358 | . . | Liquid supplied at valve interface [2015-04] |
Y10T 137/4365 | . . . | Plural feed [2015-04] |
Y10T 137/4372 | . . . | Line pressure feed [2015-04] |
Y10T 137/4379 | . . . | Feed by or with actuation [2015-04] |
Y10T 137/4386 | . . . | Loss control [2015-04] |
Y10T 137/4393 | . . . | Screw feed [2015-04] |
Y10T 137/44 | . . . . | With check valve [2015-04] |
Y10T 137/4407 | . . . . . | Excess relief [2015-04] |
Y10T 137/4414 | . . . . . | Jacking [2015-04] |
Y10T 137/4421 | . . . . | Jacking [2015-04] |
Y10T 137/4428 | . . . . | Seating [2015-04] |
Y10T 137/4435 | . . . | Spring biased piston feed [2015-04] |
Y10T 137/4442 | . . . | External pressure [2015-04] |
Y10T 137/4449 | . . . | Gravity or capillary feed [2015-04] |
Y10T 137/4456 | . | With liquid valves or liquid trap seals [2015-04] |
Y10T 137/4463 | . . | Liquid seal in liquid flow line; flow liquid forms seal [2015-04] |
Y10T 137/4471 | . . . | Valves [2015-04] |
Y10T 137/4478 | . . . . | Line condition change responsive [2015-04] |
Y10T 137/4486 | . . . . . | Plural valves or valve seats [2015-04] |
Y10T 137/4493 | . . . . . | Pivoted valve [2015-04] |
Y10T 137/4501 | . . . . . | Ball valve [2015-04] |
Y10T 137/4508 | . . . . . . | Seats vertically up [2015-04] |
Y10T 137/4516 | . . . | Seal replenishers [2015-04] |
Y10T 137/4523 | . . . | Plural inlet [2015-04] |
Y10T 137/4531 | . . . | Divided and recombined passages [2015-04] |
Y10T 137/4538 | . . . | Tangential inlet flow [2015-04] |
Y10T 137/4546 | . . . | Downward partition encircles projecting outlet [2015-04] |
Y10T 137/4553 | . . . | Submerged inlet pipe end [2015-04] |
Y10T 137/4561 | . . . . | Hinged seal bowl [2015-04] |
Y10T 137/4568 | . . . . | Distinct seal bowl in flow line connected casing [2015-04] |
Y10T 137/4576 | . . . | U-seals [2015-04] |
Y10T 137/4583 | . . . . | Topside access beneath cover plate closed floor opening [2015-04] |
Y10T 137/4591 | . . . . | Enlarged upflow leg [2015-04] |
Y10T 137/4598 | . . . . . | Topside access opening [2015-04] |
Y10T 137/4606 | . . . . | Even diameter legs [2015-04] |
Y10T 137/4613 | . . . . . | Access opening [2015-04] |
Y10T 137/4621 | . . | Seal for relatively movable valving parts [2015-04] |
Y10T 137/4628 | . . . | Horizontally moving valve [2015-04] |
Y10T 137/4636 | . . . . | Rotary [2015-04] |
Y10T 137/4643 | . . | Liquid valves [2015-04] |
Y10T 137/4651 | . . . | Branched passage for sealing liquid [2015-04] |
Y10T 137/4658 | . . . | With auxiliary means for varying liquid level [2015-04] |
Y10T 137/4666 | . . . | With baffle [2015-04] |
Y10T 137/4673 | . | Plural tanks or compartments with parallel flow [2015-04] |
Y10T 137/469 | . . | Sequentially filled and emptied [e.g., holding type] [2015-04] |
Y10T 137/4707 | . . . | With relative rotation of tank group and filling head [2015-04] |
Y10T 137/4723 | . . . . | With rotary filling and emptying head [2015-04] |
Y10T 137/474 | . . | With housings, supports or stacking arrangements [2015-04] |
Y10T 137/4757 | . . | Battery or electrolytic cell replenishment [2015-04] |
Y10T 137/4774 | . . . | Barometric supply [2015-04] |
Y10T 137/479 | . . | Flow dividing compartments [2015-04] |
Y10T 137/4807 | . . | Tank type manifold [i.e., one tank supplies or receives from at least two others] [2015-04] |
Y10T 137/4824 | . . | Tank within tank [2015-04] |
Y10T 137/4841 | . . | With cross connecting passage [2015-04] |
Y10T 137/4857 | . . | With manifold or grouped outlets [2015-04] |
Y10T 137/4874 | . . . | Tank truck type [2015-04] |
Y10T 137/4891 | . | With holder for solid, flaky or pulverized material to be dissolved or entrained [2015-04] |
Y10T 137/5109 | . | Convertible [2015-04] |
Y10T 137/5153 | . . | Reversible check [2015-04] |
Y10T 137/5196 | . . | Unit orientable in a single location between plural positions [2015-04] |
Y10T 137/524 | . . . | Reversible stop and vent or waste [2015-04] |
Y10T 137/5283 | . . | Units interchangeable between alternate locations [2015-04] |
Y10T 137/5327 | . | Hydrant type [2015-04] |
Y10T 137/5333 | . . | Water crane type [2015-04] |
Y10T 137/5339 | . . . | Spout operated valve [2015-04] |
Y10T 137/5345 | . . . | Rotating riser [2015-04] |
Y10T 137/535 | . . . . | Spout articulated to riser [2015-04] |
Y10T 137/5356 | . . . . | Vertically movable riser [2015-04] |
Y10T 137/5362 | . . . | Extensible spout [2015-04] |
Y10T 137/5368 | . . . | Spout articulated to riser [2015-04] |
Y10T 137/5374 | . . | Plural riser [2015-04] |
Y10T 137/538 | . . | Expansible chamber operated by valve actuator for draining riser [2015-04] |
Y10T 137/5386 | . . | With pump or ejector [2015-04] |
Y10T 137/5392 | . . | Removable valve and valve seat [2015-04] |
Y10T 137/5397 | . . . | With extension to facilitate removal [2015-04] |
Y10T 137/5403 | . . | Removable valve with supplemental check valve [2015-04] |
Y10T 137/5409 | . . | Movable riser actuated valve [2015-04] |
Y10T 137/5415 | . . . | Reciprocating riser [2015-04] |
Y10T 137/5421 | . . . . | Piston type valve [2015-04] |
Y10T 137/5427 | . . | Balanced valve [2015-04] |
Y10T 137/5433 | . . | Valve actuator extends laterally from bottom of riser [2015-04] |
Y10T 137/5438 | . . | Valve actuator outside riser [2015-04] |
Y10T 137/5444 | . . . | Lever actuator [2015-04] |
Y10T 137/545 | . . . | With casing, flush with ground or pavement surface [2015-04] |
Y10T 137/5456 | . . | With casing [2015-04] |
Y10T 137/5462 | . . . | Flush with ground or pavement surface [2015-04] |
Y10T 137/5468 | . . . | Cap, cover or hood [2015-04] |
Y10T 137/5474 | . . . | With heater [2015-04] |
Y10T 137/5479 | . . | With actuator lubricating means [2015-04] |
Y10T 137/5485 | . . | With valve at outlet [2015-04] |
Y10T 137/5491 | . . | With supplemental valve [2015-04] |
Y10T 137/5497 | . . | Protection against freezing [2015-04] |
Y10T 137/5503 | . . . | Stop and waste [2015-04] |
Y10T 137/5509 | . . . . | With disabling means [2015-04] |
Y10T 137/5515 | . . . . | Separate relatively movable valves with single actuator [2015-04] |
Y10T 137/5521 | . . . . . | Unidirectional abutting connection between main valve or actuator and waste valve [2015-04] |
Y10T 137/5526 | . . . . . | With screw or gear in actuating mechanism [2015-04] |
Y10T 137/5532 | . . . . | Reciprocating relatively fixed valves [2015-04] |
Y10T 137/5538 | . . . . . | Waste through lower valve guide [2015-04] |
Y10T 137/5544 | . | Reversing valves - regenerative furnace type [2015-04] |
Y10T 137/5617 | . . | With cooling [2015-04] |
Y10T 137/5689 | . . | Rotary reversing valve [2015-04] |
Y10T 137/5762 | . | With leakage or drip collecting [2015-04] |
Y10T 137/5835 | . . | Relatively movable receptacle or drain pipe and outlet [2015-04] |
Y10T 137/5907 | . . | Collector for waste liquid derived from solid, gas or vapor [2015-04] |
Y10T 137/598 | . | With repair, tapping, assembly, or disassembly means [2015-04] |
Y10T 137/5983 | . . | Blow out preventer or choke valve device [e.g., oil well flow controlling device, etc.] [2015-04] |
Y10T 137/5987 | . . | Solenoid or electromagnetically operated valve [2015-04] |
Y10T 137/599 | . . | Pressure regulating type valve [2015-04] |
Y10T 137/5994 | . . . | Diaphragm type [2015-04] |
Y10T 137/5997 | . . | Gas or water meter replacing [2015-04] |
Y10T 137/60 | . . | Assembling or disassembling flexible tube or sleeve type valve [2015-04] |
Y10T 137/6004 | . . | Assembling or disassembling float or float valve [2015-04] |
Y10T 137/6007 | . . | Assembling or disassembling multi way valve [2015-04] |
Y10T 137/6011 | . . | Assembling, disassembling, or removing cartridge type valve [e.g., insertable and removable as a unit, etc.] [2015-04] |
Y10T 137/6014 | . . . | Faucet type [e.g., domestic water use, etc.] [2015-04] |
Y10T 137/6017 | . . . . | Including removable valve head and seat unit [2015-04] |
Y10T 137/6021 | . . . . | Including mechanical movement actuator [2015-04] |
Y10T 137/6024 | . . . . | Particular handle or handle fastening means [2015-04] |
Y10T 137/6028 | . . | Assembling or disassembling pivoted valve [2015-04] |
Y10T 137/6031 | . . | Assembling or disassembling rotary valve [2015-04] |
Y10T 137/6035 | . . . | Rotary ball valve [2015-04] |
Y10T 137/6038 | . . . . | Particular valve seat or interface seal [2015-04] |
Y10T 137/6041 | . . . . . | Replaceable [2015-04] |
Y10T 137/6045 | . . . . . . | With top entry valve [2015-04] |
Y10T 137/6048 | . . . | Butterfly valve [2015-04] |
Y10T 137/6052 | . . . . | Having valve head or seat packing [2015-04] |
Y10T 137/6055 | . . . . | With head and stem collections [2015-04] |
Y10T 137/6058 | . . . | Plug valve [2015-04] |
Y10T 137/6062 | . . . . | Having retainer at actuator end [2015-04] |
Y10T 137/6065 | . . | Assembling or disassembling reciprocating valve [2015-04] |
Y10T 137/6069 | . . . | Having particularly packed or sealed mechanical movement actuator [2015-04] |
Y10T 137/6072 | . . . | Gate valve [2015-04] |
Y10T 137/6075 | . . . . | Bifaced [2015-04] |
Y10T 137/6079 | . . . . | Having particular valve seat [2015-04] |
Y10T 137/6082 | . . . . . | Including seal [2015-04] |
Y10T 137/6086 | . . | Assembling or disassembling check valve [2015-04] |
Y10T 137/6089 | . . | With mechanical movement between actuator and valve [2015-04] |
Y10T 137/6092 | . . . | Plural motions of valve [2015-04] |
Y10T 137/6096 | . . . | Lever type [2015-04] |
Y10T 137/6099 | . . . | Gear type [2015-04] |
Y10T 137/6103 | . . . | Cam type [2015-04] |
Y10T 137/6106 | . . . | Screw type [2015-04] |
Y10T 137/6109 | . . | Tool for applying or removing valve or valve member [2015-04] |
Y10T 137/6113 | . . . | Including sealing feature [2015-04] |
Y10T 137/6116 | . . | With holding means functioning only during transportation assembly or disassembly [2015-04] |
Y10T 137/612 | . . | Tapping a pipe, keg, or apertured tank under pressure [2015-04] |
Y10T 137/6123 | . . . | With aperture forming means [2015-04] |
Y10T 137/6126 | . . . | Imperforate closure removing and holding tap [2015-04] |
Y10T 137/613 | . . . | With valved closure or bung [2015-04] |
Y10T 137/6133 | . . . . | Combined rotary and longitudinal movement of valve [2015-04] |
Y10T 137/6137 | . . . . | Longitudinal movement of valve [2015-04] |
Y10T 137/614 | . . . . | Rotary movement of valve [2015-04] |
Y10T 137/6144 | . . . | With core ejectors [2015-04] |
Y10T 137/6147 | . . . . | Impact operated [2015-04] |
Y10T 137/615 | . . | Foot valve extraction from top of enclosure [2015-04] |
Y10T 137/6154 | . . | With disassembly tool engaging feature [2015-04] |
Y10T 137/6157 | . . . | Wrench engaging lugs [2015-04] |
Y10T 137/6161 | . . | With provision of alternate wear parts [2015-04] |
Y10T 137/6164 | . . . | Valve heads and/or seats [2015-04] |
Y10T 137/6167 | . . . . | Opposite duplicate surfaces of unitary structure [2015-04] |
Y10T 137/6171 | . . . . . | Homogeneous material [2015-04] |
Y10T 137/6174 | . . . . . . | Valve heads [2015-04] |
Y10T 137/6178 | . . . . | Different portions of continuous surfaces [2015-04] |
Y10T 137/6181 | . . . . | Successively used adjacent independent elements [2015-04] |
Y10T 137/6184 | . . | Removable valve with normally disabled supplemental check valve [2015-04] |
Y10T 137/6188 | . . . | Check valve disabled by normally movable main valve part [2015-04] |
Y10T 137/6191 | . . . . | Ball check [2015-04] |
Y10T 137/6195 | . . . . | Spring bias [2015-04] |
Y10T 137/6198 | . | Non-valving motion of the valve or valve seat [2015-04] |
Y10T 137/6253 | . . | Rotary motion of a reciprocating valve [2015-04] |
Y10T 137/6307 | . . . | Turbine on valve [2015-04] |
Y10T 137/6362 | . . . | Manual rotating means [2015-04] |
Y10T 137/6416 | . | With heating or cooling of the system [2015-04] |
Y10T 137/6443 | . . | With burner [2015-04] |
Y10T 137/647 | . . . | Flue extending through fluid [2015-04] |
Y10T 137/6497 | . . | Hot and cold water system having a connection from the hot to the cold channel [2015-04] |
Y10T 137/6525 | . . | Air heated or cooled [fan, fins, or channels] [2015-04] |
Y10T 137/6552 | . . | With diversion of part of fluid to heat or cool the device or its contents [2015-04] |
Y10T 137/6579 | . . | Circulating fluid in heat exchange relationship [2015-04] |
Y10T 137/6606 | . . | With electric heating element [2015-04] |
Y10T 137/6633 | . | With fluid system support for workman or non-system material [2015-04] |
Y10T 137/6851 | . | With casing, support, protector or static constructional installations [2015-04] |
Y10T 137/6855 | . . | Vehicle [2015-04] |
Y10T 137/6858 | . . . | Locomotive [2015-04] |
Y10T 137/6862 | . . . . | Boiler or steam dome [2015-04] |
Y10T 137/6866 | . . . | Railway car [2015-04] |
Y10T 137/6869 | . . . . | Car frame [2015-04] |
Y10T 137/6873 | . . . . | End of car [2015-04] |
Y10T 137/6877 | . . . . | Roof, wall or floor [2015-04] |
Y10T 137/6881 | . . . | Automotive [2015-04] |
Y10T 137/6884 | . . . . | Steering post or wheel [2015-04] |
Y10T 137/6888 | . . . . | Dash [2015-04] |
Y10T 137/6892 | . . . . | Floor or frame [2015-04] |
Y10T 137/6895 | . . . . | Fender or running board [2015-04] |
Y10T 137/6899 | . . . | With hose reel storage means [2015-04] |
Y10T 137/6903 | . . . | Guided by means of track or guideway [2015-04] |
Y10T 137/6906 | . . . | Aerial or water-supported [e.g., airplane or ship, etc.] [2015-04] |
Y10T 137/691 | . . . | With retractable or nonuse-positionable support wheel [2015-04] |
Y10T 137/6914 | . . . | Vehicle supports fluid compressor and compressed fluid storage tank [2015-04] |
Y10T 137/6918 | . . | With hose storage or retrieval means [2015-04] |
Y10T 137/6921 | . . . | With means for plural hoses [2015-04] |
Y10T 137/6925 | . . . | With flow regulation responsive to hose movement [2015-04] |
Y10T 137/6929 | . . . . | Reel type [2015-04] |
Y10T 137/6932 | . . . | With retrieval means [2015-04] |
Y10T 137/6936 | . . . . | Power stop or brake [2015-04] |
Y10T 137/694 | . . . . . | Responsive to position of hose in casing [2015-04] |
Y10T 137/6943 | . . . . | Biased to retracted position [2015-04] |
Y10T 137/6947 | . . . . . | Boom type [2015-04] |
Y10T 137/6951 | . . . . . | Weighted [2015-04] |
Y10T 137/6954 | . . . | Reel with support therefor [2015-04] |
Y10T 137/6958 | . . . . | Ground supported [2015-04] |
Y10T 137/6962 | . . . | Basket or holder for folded coiled hose [2015-04] |
Y10T 137/6966 | . . | Static constructional installations [2015-04] |
Y10T 137/6969 | . . . | Buildings [2015-04] |
Y10T 137/6973 | . . . . | Outside access to portions of the system [2015-04] |
Y10T 137/6977 | . . . . | Escutcheon type support [2015-04] |
Y10T 137/698 | . . . . | Wall [2015-04] |
Y10T 137/6984 | . . . . . | Recessed gas outlet box [2015-04] |
Y10T 137/6988 | . . . . | Floor installation [2015-04] |
Y10T 137/6991 | . . . | Ground supporting enclosure [2015-04] |
Y10T 137/6995 | . . . . | Valve and meter wells [2015-04] |
Y10T 137/6999 | . . . . . | With means to center well on valve [2015-04] |
Y10T 137/7002 | . . . . . . | Detachable base plate [2015-04] |
Y10T 137/7006 | . . . . . . | Vertical casing aligned by valve casing [2015-04] |
Y10T 137/701 | . . . . . | Combined with actuator [2015-04] |
Y10T 137/7014 | . . . . . . | Telescopic well casing [2015-04] |
Y10T 137/7017 | . . . . . | Telescopic well casing [2015-04] |
Y10T 137/7021 | . . . . . | Covers [2015-04] |
Y10T 137/7025 | . . . . | Pipe line transport [2015-04] |
Y10T 137/7028 | . . . | Tapering or tower type [2015-04] |
Y10T 137/7032 | . . | Furniture and housing furnishings [2015-04] |
Y10T 137/7036 | . . | Jacketed [2015-04] |
Y10T 137/7039 | . . | Tank supports [2015-04] |
Y10T 137/7043 | . . | Guards and shields [2015-04] |
Y10T 137/7047 | . . . | Resilient abutment for preventing breakage [2015-04] |
Y10T 137/7051 | . . . | Nozzle abutment for scratch or damage prevention [2015-04] |
Y10T 137/7054 | . . . | Cover for beer cooler aperture for faucet [2015-04] |
Y10T 137/7058 | . . . | Sanitary covers or shields [2015-04] |
Y10T 137/7062 | . . . | Valve guards [2015-04] |
Y10T 137/7065 | . . . . | With means for accommodating a detachable actuator [2015-04] |
Y10T 137/7069 | . | With lock or seal [2015-04] |
Y10T 137/71 | . . | With seal [2015-04] |
Y10T 137/7131 | . . | Common lock and valve actuator [2015-04] |
Y10T 137/7162 | . . . | Combination lock [2015-04] |
Y10T 137/7194 | . . . | Biased valve [2015-04] |
Y10T 137/7225 | . . . | Mechanical movement between lock and valve [2015-04] |
Y10T 137/7256 | . . | Locks against rotary motion [2015-04] |
Y10T 137/7287 | . | Liquid level responsive or maintaining systems [2015-04] |
Y10T 137/729 | . . | Washing machine cycle control [2015-04] |
Y10T 137/7293 | . . | Liquid excluding devices for gas inlet or outlets [2015-04] |
Y10T 137/7297 | . . | With second diverse control [2015-04] |
Y10T 137/73 | . . . | Manual control [2015-04] |
Y10T 137/7303 | . . | Control of both inflow and outflow of tank [2015-04] |
Y10T 137/7306 | . . | Electrical characteristic sensing [2015-04] |
Y10T 137/731 | . . | With control fluid connection at desired liquid level [2015-04] |
Y10T 137/7313 | . . | Control of outflow from tank [2015-04] |
Y10T 137/7316 | . . . | Self-emptying tanks [2015-04] |
Y10T 137/7319 | . . . . | By float [2015-04] |
Y10T 137/7323 | . . . | By float [2015-04] |
Y10T 137/7326 | . . . . | Low level safety cut-off [2015-04] |
Y10T 137/7329 | . . | With supplemental or safety closing means or bias [2015-04] |
Y10T 137/7332 | . . . | Sinking or bucket type float [2015-04] |
Y10T 137/7336 | . . . | Gravitating tank [2015-04] |
Y10T 137/7339 | . . | By weight of accumulated fluid [2015-04] |
Y10T 137/7342 | . . . | In sinking or bucket type float [2015-04] |
Y10T 137/7345 | . . . | Oil burner fuel overflow preventing safety cut-offs [2015-04] |
Y10T 137/7349 | . . . | In communicating measuring vessel [2015-04] |
Y10T 137/7352 | . . . . | Top and bottom connections [2015-04] |
Y10T 137/7355 | . . . | In gravitating tank [2015-04] |
Y10T 137/7358 | . . | By float controlled valve [2015-04] |
Y10T 137/7361 | . . . | Valve opened by external means, closing or closing control by float [2015-04] |
Y10T 137/7365 | . . . | Single float controls plural valves [2015-04] |
Y10T 137/7368 | . . . | Servo relay operation of control [2015-04] |
Y10T 137/7371 | . . . . | Fluid pressure [2015-04] |
Y10T 137/7374 | . . . . . | Flexible diaphragm valve [2015-04] |
Y10T 137/7378 | . . . . . | From tank [2015-04] |
Y10T 137/7381 | . . . | Quick acting [2015-04] |
Y10T 137/7384 | . . . . | Pilot float released [2015-04] |
Y10T 137/7387 | . . . . | Over center mechanism [2015-04] |
Y10T 137/7391 | . . . . . | Shifting weight [2015-04] |
Y10T 137/7394 | . . . . | Trip mechanism [2015-04] |
Y10T 137/7397 | . . . . . | Weight or spring bias [2015-04] |
Y10T 137/74 | . . . . | Lost motion mechanism [2015-04] |
Y10T 137/7404 | . . . | Plural floats [2015-04] |
Y10T 137/7407 | . . . | With counter-balance [2015-04] |
Y10T 137/741 | . . . . | Within tank [2015-04] |
Y10T 137/7413 | . . . | Level adjustment or selection means [2015-04] |
Y10T 137/7417 | . . . | With float leakage disposal [2015-04] |
Y10T 137/742 | . . . | In separate communicating float chamber [2015-04] |
Y10T 137/7423 | . . . | Rectilinearly traveling float [2015-04] |
Y10T 137/7426 | . . . . | Float co-axial with valve or port [2015-04] |
Y10T 137/743 | . . . . . | Float is spreader or anti-splash means [2015-04] |
Y10T 137/7433 | . . . . . | Float surrounds inlet pipe [2015-04] |
Y10T 137/7436 | . . . . . | Float rigid with valve [2015-04] |
Y10T 137/7439 | . . . | Float arm operated valve [2015-04] |
Y10T 137/7442 | . . . . | With valve retarder or cushion means [2015-04] |
Y10T 137/7446 | . . . . | With flow guide or restrictor [2015-04] |
Y10T 137/7449 | . . . . . | External hood or deflector or annular outlet surrounding the inlet pipe [2015-04] |
Y10T 137/7452 | . . . . | Movable nozzle or inlet terminal [2015-04] |
Y10T 137/7455 | . . . . | Valve removable from outside container [2015-04] |
Y10T 137/7459 | . . . . | With U-shaped inlet pipe having terminal valve [2015-04] |
Y10T 137/7462 | . . . . | With refill pipe [2015-04] |
Y10T 137/7465 | . . . . | Assembly mounted on and having reciprocating valve element coaxial with inlet pipe [2015-04] |
Y10T 137/7468 | . . . . . | Horizontal or side entering pipe [2015-04] |
Y10T 137/7472 | . . . . . | Vertical inlet riser [2015-04] |
Y10T 137/7475 | . . . . | With toggle or second lever connected to valve [2015-04] |
Y10T 137/7478 | . . . . | With interposed cam, gear or threaded connection [2015-04] |
Y10T 137/7481 | . . . . | Rotary valve element [2015-04] |
Y10T 137/7485 | . . . . | Pivoted valve [2015-04] |
Y10T 137/7488 | . . . . | Ball valves [2015-04] |
Y10T 137/7491 | . . . . | Balanced valves [2015-04] |
Y10T 137/7494 | . . . . | Flexible valve [2015-04] |
Y10T 137/7498 | . . | Barometric [2015-04] |
Y10T 137/7501 | . . . | With shut-off between supply tank and receiver [2015-04] |
Y10T 137/7504 | . | Removable valve head and seat unit [2015-04] |
Y10T 137/7559 | . . | Pump type [2015-04] |
Y10T 137/7613 | . . | Threaded into valve casing [2015-04] |
Y10T 137/7668 | . . | Retained by bonnet or closure [2015-04] |
Y10T 137/7722 | . | Line condition change responsive valves [2015-04] |
Y10T 137/7723 | . . | Safety cut-off requiring reset [2015-04] |
Y10T 137/7724 | . . . | Thermal [2015-04] |
Y10T 137/7725 | . . . | Responsive to both high and low pressure or velocity [2015-04] |
Y10T 137/7726 | . . . | Responsive to change in rate of flow [2015-04] |
Y10T 137/7727 | . . . . | Excessive flow cut-off [2015-04] |
Y10T 137/7728 | . . . | High pressure cut-off [2015-04] |
Y10T 137/7729 | . . . | Reset by pressure equalization valve or by-pass [2015-04] |
Y10T 137/773 | . . . | Fluid released trip [2015-04] |
Y10T 137/7731 | . . . | Fluid counter-biased or unseated valve [2015-04] |
Y10T 137/7732 | . . . . | With mechanical stop against reopening [2015-04] |
Y10T 137/7733 | . . . . | With fluid pressure seating of valve [2015-04] |
Y10T 137/7734 | . . | Fluid opened valve requiring reset [2015-04] |
Y10T 137/7736 | . . | Consistency responsive [2015-04] |
Y10T 137/7737 | . . | Thermal responsive [2015-04] |
Y10T 137/7738 | . . | Pop valves [2015-04] |
Y10T 137/7739 | . . . | Pop closing valves [2015-04] |
Y10T 137/774 | . . . | Pop pressure reactor in inflow to valve [2015-04] |
Y10T 137/7741 | . . . | Pop pressure reactor in branched released path [2015-04] |
Y10T 137/7742 | . . . . | Separate relief valves or valves for each branch [2015-04] |
Y10T 137/7743 | . . . | Lost motion between pop pressure reactor and valve [2015-04] |
Y10T 137/7744 | . . . | Adjustable choke [2015-04] |
Y10T 137/7745 | . . . . | Annular lip or baffle [2015-04] |
Y10T 137/7746 | . . . . . | On movable valve part [2015-04] |
Y10T 137/7747 | . . . . . | Screw threaded [2015-04] |
Y10T 137/7748 | . . | Combustion engine induction type [2015-04] |
Y10T 137/7749 | . . . | Valve in auxiliary inlet to induction line [2015-04] |
Y10T 137/775 | . . . | With manual modifier [2015-04] |
Y10T 137/7751 | . . . | With suction compensator [2015-04] |
Y10T 137/7752 | . . . | With separate reactor surface [2015-04] |
Y10T 137/7753 | . . . | Unbalanced pivoted valve [e.g., unbalanced butterfly type] [2015-04] |
Y10T 137/7754 | . . | Line flow effect assisted [2015-04] |
Y10T 137/7755 | . . . | Reactor surface normal to flow [2015-04] |
Y10T 137/7756 | . . . | Reactor surface separated from flow by apertured partition [2015-04] |
Y10T 137/7757 | . . . . | Through separate aperture [2015-04] |
Y10T 137/7758 | . . | Pilot or servo controlled [2015-04] |
Y10T 137/7759 | . . . | Responsive to change in rate of fluid flow [2015-04] |
Y10T 137/776 | . . . . | Control by pressures across flow line valve [2015-04] |
Y10T 137/7761 | . . . | Electrically actuated valve [2015-04] |
Y10T 137/7762 | . . . | Fluid pressure type [2015-04] |
Y10T 137/7764 | . . . . | Choked or throttled pressure type [2015-04] |
Y10T 137/7765 | . . . . . | Pilot valve within main valve head [2015-04] |
Y10T 137/7766 | . . . . . | Choked passage through main valve head [2015-04] |
Y10T 137/7767 | . . . . . | Loose fitting piston [2015-04] |
Y10T 137/7768 | . . . . . | Pilot controls supply to pressure chamber [2015-04] |
Y10T 137/7769 | . . . . | Single acting fluid servo [2015-04] |
Y10T 137/777 | . . . . . | Spring biased [2015-04] |
Y10T 137/7771 | . . | Bi-directional flow valves [2015-04] |
Y10T 137/7772 | . . . | One head and seat carried by head of another [2015-04] |
Y10T 137/7773 | . . . . | Supporting valve only spring biased [2015-04] |
Y10T 137/7774 | . . . . | Supporting valve spring carried by supporting valve [2015-04] |
Y10T 137/7775 | . . . . . | Spring stop on supported valve stem [2015-04] |
Y10T 137/7776 | . . . . . | Spring abuts guide for supported valve stem [2015-04] |
Y10T 137/7777 | . . . . | Both valves spring biased [2015-04] |
Y10T 137/7778 | . . . | Axes of ports perpendicular [2015-04] |
Y10T 137/7779 | . . . | Axes of ports parallel [2015-04] |
Y10T 137/778 | . . . | Axes of ports co-axial [2015-04] |
Y10T 137/7781 | . . | With separate connected fluid reactor surface [2015-04] |
Y10T 137/7782 | . . . | With manual or external control for line valve [2015-04] |
Y10T 137/7783 | . . . | Valve closes in responses to reverse flow [2015-04] |
Y10T 137/7784 | . . . | Responsive to change in rate of fluid flow [2015-04] |
Y10T 137/7785 | . . . . | Valve closes in response to excessive flow [2015-04] |
Y10T 137/7786 | . . . . | Turbine or swinging vane type reactor [2015-04] |
Y10T 137/7787 | . . . . | Expansible chamber subject to differential pressures [2015-04] |
Y10T 137/7788 | . . . . . | Pressures across fixed choke [2015-04] |
Y10T 137/7789 | . . . . . | With Venturi tube having a connection to throat [2015-04] |
Y10T 137/7791 | . . . . . | Pressures across flow line valve [2015-04] |
Y10T 137/7792 | . . . . | Movable deflector or choke [2015-04] |
Y10T 137/7793 | . . . | With opening bias [e.g., pressure regulator] [2015-04] |
Y10T 137/7794 | . . . . | With relief valve [2015-04] |
Y10T 137/7795 | . . . . | Multi-stage [2015-04] |
Y10T 137/7796 | . . . . | Senses inlet pressure [2015-04] |
Y10T 137/7797 | . . . . | Bias variable during operation [2015-04] |
Y10T 137/7798 | . . . . . | Ancillary reactor surface responds to inlet pressure [2015-04] |
Y10T 137/7799 | . . . . . | Liquid transfer [2015-04] |
Y10T 137/78 | . . . . . | Weight [2015-04] |
Y10T 137/7801 | . . . . | Balanced valve [2015-04] |
Y10T 137/7802 | . . . . | Liquid level responsive gas flow control [2015-04] |
Y10T 137/7803 | . . . . | With protective separator [2015-04] |
Y10T 137/7804 | . . . . | Main flow through isolated reactor chamber [2015-04] |
Y10T 137/7805 | . . . . | Through external pipe [2015-04] |
Y10T 137/7806 | . . . . . | Modified valve casing [2015-04] |
Y10T 137/7807 | . . . . . | Adjustable external lever [2015-04] |
Y10T 137/7808 | . . . . | Apertured reactor surface surrounds flow line [2015-04] |
Y10T 137/7809 | . . . . | Reactor surface separated by apertured partition [2015-04] |
Y10T 137/781 | . . . . . | In valve stem [2015-04] |
Y10T 137/7811 | . . . . . . | Also through reactor surface [2015-04] |
Y10T 137/7812 | . . . . . | Valve stem passes through the aperture [2015-04] |
Y10T 137/7813 | . . . . . . | Plural reactor surfaces [2015-04] |
Y10T 137/7814 | . . . . . . | Reactor is an inverted cup having liquid seal [2015-04] |
Y10T 137/7815 | . . . . . . . | With movement dampener [2015-04] |
Y10T 137/7816 | . . . . . . . | Valve head in inlet chamber [2015-04] |
Y10T 137/7818 | . . . . . . | Valve head in inlet chamber [2015-04] |
Y10T 137/7819 | . . . . . . . | Rectilinear valve stem rigid with reactor surface [2015-04] |
Y10T 137/782 | . . . . . | Reactor surface is diaphragm [2015-04] |
Y10T 137/7821 | . . . . . . | With valve closing bias [2015-04] |
Y10T 137/7822 | . . . . | Reactor surface closes chamber [2015-04] |
Y10T 137/7823 | . . . . . | Valve head in inlet chamber [2015-04] |
Y10T 137/7824 | . . . . . . | Reactor surface is inverted cup [float] [2015-04] |
Y10T 137/7825 | . . . . . . | Rectilinear valve stem rigid with reactor surface [2015-04] |
Y10T 137/7826 | . . . . . . | With valve closing bias [2015-04] |
Y10T 137/7827 | . . . . . . . | In reactor chamber [2015-04] |
Y10T 137/7828 | . . . . . | Valve head on yoke [2015-04] |
Y10T 137/7829 | . . . . . . | Yoke has valve closing bias [2015-04] |
Y10T 137/783 | . . . . . | Reactor operatively connected to valve by mechanical movement [2015-04] |
Y10T 137/7831 | . . . . | With mechanical movement between actuator and valve [2015-04] |
Y10T 137/7832 | . . . | Plural valves biased closed [2015-04] |
Y10T 137/7833 | . . . | With means for mounting or connecting to system [2015-04] |
Y10T 137/7834 | . . . | Valve seat or external sleeve moves to open valve [2015-04] |
Y10T 137/7835 | . . . | Valve seating in direction of flow [2015-04] |
Y10T 137/7836 | . . . . | Flexible diaphragm or bellows reactor [2015-04] |
Y10T 137/7837 | . . | Direct response valves [i.e., check valve type] [2015-04] |
Y10T 137/7838 | . . . | Plural [2015-04] |
Y10T 137/7839 | . . . . | Dividing and recombining in a single flow path [2015-04] |
Y10T 137/784 | . . . . . | Integral resilient member forms plural valves [2015-04] |
Y10T 137/7841 | . . . . | One valve carries head and seat for second valve [2015-04] |
Y10T 137/7842 | . . . . | Diverse types [2015-04] |
Y10T 137/7843 | . . . . | Integral resilient member forms plural valves [2015-04] |
Y10T 137/7845 | . . . . | With common biasing means [2015-04] |
Y10T 137/7846 | . . . . | Mechanically interconnected [2015-04] |
Y10T 137/7847 | . . . | With leak passage [2015-04] |
Y10T 137/7848 | . . . . | Permits flow at valve interface [2015-04] |
Y10T 137/7849 | . . . . | Bypass in valve casing [2015-04] |
Y10T 137/785 | . . . | With retarder or dashpot [2015-04] |
Y10T 137/7851 | . . . . | End of valve forms dashpot chamber [2015-04] |
Y10T 137/7852 | . . . . | End of valve moves inside dashpot chamber [2015-04] |
Y10T 137/7853 | . . . . . | Enlarged piston on end of valve stem [2015-04] |
Y10T 137/7854 | . . . | In couplings for coaxial conduits, e.g., drill pipe check valves [2015-04] |
Y10T 137/7855 | . . . . | Valve seat threaded into a coupling element [2015-04] |
Y10T 137/7856 | . . . . | Valve seat formed on or carried by a coupling element [2015-04] |
Y10T 137/7857 | . . . . | Valve seat clamped between coupling elements [2015-04] |
Y10T 137/7858 | . . . | With means for selecting area of valve or seat [2015-04] |
Y10T 137/7859 | . . . | Single head, plural ports in parallel [2015-04] |
Y10T 137/786 | . . . . | Concentric ports [2015-04] |
Y10T 137/7861 | . . . . | Annular head [2015-04] |
Y10T 137/7862 | . . . . . | Central post on seat [2015-04] |
Y10T 137/7863 | . . . . . . | Stop [2015-04] |
Y10T 137/7864 | . . . . . . . | With guide [2015-04] |
Y10T 137/7865 | . . . . . . | Guide [2015-04] |
Y10T 137/7866 | . . . | Plural seating [2015-04] |
Y10T 137/7867 | . . . . | Sequential [2015-04] |
Y10T 137/7868 | . . . . . | Resilient gasket [2015-04] |
Y10T 137/7869 | . . . | Biased open [2015-04] |
Y10T 137/787 | . . . . | Oppositely swinging vanes [2015-04] |
Y10T 137/7871 | . . . . | Weight biased [2015-04] |
Y10T 137/7873 | . . . . . | Ball valves [2015-04] |
Y10T 137/7874 | . . . . . | Edge pivoted valve [2015-04] |
Y10T 137/7875 | . . . . | Pivoted valves [2015-04] |
Y10T 137/7876 | . . . | With external means for opposing bias [2015-04] |
Y10T 137/7877 | . . . . | With means for retaining external means in bias opposing position [2015-04] |
Y10T 137/7878 | . . . | With bias adjustment indicator [2015-04] |
Y10T 137/7879 | . . . | Resilient material valve [2015-04] |
Y10T 137/788 | . . . . | Having expansible port [2015-04] |
Y10T 137/7881 | . . . . . | Apertured plate [2015-04] |
Y10T 137/7882 | . . . . . | Having exit lip [2015-04] |
Y10T 137/7883 | . . . . . . | With biasing means [2015-04] |
Y10T 137/7884 | . . . . . . | Side vent [2015-04] |
Y10T 137/7885 | . . . . . . | Multiple slit [2015-04] |
Y10T 137/7886 | . . . . . . | Internally extending mount [2015-04] |
Y10T 137/7887 | . . . . | Center flexing strip [2015-04] |
Y10T 137/7888 | . . . . | With valve member flexing about securement [2015-04] |
Y10T 137/7889 | . . . . . | Sleeve [2015-04] |
Y10T 137/789 | . . . . . | Central mount [2015-04] |
Y10T 137/7891 | . . . . . | Flap or reed [2015-04] |
Y10T 137/7892 | . . . . . . | With stop [2015-04] |
Y10T 137/7897 | . . . | Vacuum relief type [2015-04] |
Y10T 137/7898 | . . . | Pivoted valves [2015-04] |
Y10T 137/79 | . . . . | Head retained by removable closure [2015-04] |
Y10T 137/7901 | . . . . | Valve head movably connected for accommodation to seat [2015-04] |
Y10T 137/7902 | . . . . | Valve mounted on end of pipe [2015-04] |
Y10T 137/7903 | . . . . | Weight biased [2015-04] |
Y10T 137/7904 | . . . | Reciprocating valves [2015-04] |
Y10T 137/7905 | . . . . | Plural biasing means [2015-04] |
Y10T 137/7906 | . . . . | Cam means for adjusting and fixing bias [2015-04] |
Y10T 137/7907 | . . . . | Varying effective lever arm [2015-04] |
Y10T 137/7908 | . . . . | Weight biased [2015-04] |
Y10T 137/7909 | . . . . . | Valve body is the weight [2015-04] |
Y10T 137/791 | . . . . . . | Ball valves [2015-04] |
Y10T 137/7911 | . . . . . . . | Removable cage [2015-04] |
Y10T 137/7912 | . . . . . . . | Separable seat [2015-04] |
Y10T 137/7913 | . . . . . . | Guided head [2015-04] |
Y10T 137/7914 | . . . . . . . | Cage [2015-04] |
Y10T 137/7915 | . . . . . . . | Guide stem [2015-04] |
Y10T 137/7916 | . . . . . . . . | With closing stop [2015-04] |
Y10T 137/7917 | . . . . . . . . | Oppositely disposed [2015-04] |
Y10T 137/7918 | . . . . . . . . | Head slidable on guide rod [2015-04] |
Y10T 137/7919 | . . . . . . . . | Guide and seat integral unit [2015-04] |
Y10T 137/792 | . . . . . . . . | Guide and closure integral unit [2015-04] |
Y10T 137/7921 | . . . . . | Weight coaxial with valve [2015-04] |
Y10T 137/7922 | . . . . | Spring biased [2015-04] |
Y10T 137/7923 | . . . . . | With means to protect spring from fluid [2015-04] |
Y10T 137/7924 | . . . . . | Spring under tension [2015-04] |
Y10T 137/7925 | . . . . . | Piston-type valves [2015-04] |
Y10T 137/7927 | . . . . . | Ball valves [2015-04] |
Y10T 137/7928 | . . . . . . | With follower [2015-04] |
Y10T 137/7929 | . . . . . | Spring coaxial with valve [2015-04] |
Y10T 137/793 | . . . . . . | Broken valve parts retainer [2015-04] |
Y10T 137/7931 | . . . . . . | Spring in inlet [2015-04] |
Y10T 137/7932 | . . . . . . | Valve stem extends through fixed spring abutment [2015-04] |
Y10T 137/7933 | . . . . . . . | Yoke or cage-type support for valve stem [2015-04] |
Y10T 137/7934 | . . . . . . | Spring abuts removable valve stem guide [2015-04] |
Y10T 137/7935 | . . . . . . | Head slides on guide-rod concentric with spring [2015-04] |
Y10T 137/7936 | . . . . . . | Spring guides valve head [2015-04] |
Y10T 137/7937 | . . . . . . | Cage-type guide for stemless valves [2015-04] |
Y10T 137/7938 | . . . . . . | Guide means integral and coplanar with valve disk [2015-04] |
Y10T 137/7939 | . . . . . . | Head between spring and guide [2015-04] |
Y10T 137/794 | . | With means for separating solid material from the fluid [2015-04] |
Y10T 137/7976 | . . | Plural separating elements [2015-04] |
Y10T 137/8013 | . . | Sediment chamber [2015-04] |
Y10T 137/8049 | . . | Movable strainer [2015-04] |
Y10T 137/8085 | . . | Hollow strainer, fluid inlet and outlet perpendicular to each other [2015-04] |
Y10T 137/8122 | . . | Planar strainer normal to flow path [2015-04] |
Y10T 137/8158 | . | With indicator, register, recorder, alarm or inspection means [2015-04] |
Y10T 137/8175 | . . | Plural [2015-04] |
Y10T 137/8192 | . . . | Unobvious - "combination lock" type [2015-04] |
Y10T 137/8208 | . . | Time [2015-04] |
Y10T 137/8225 | . . | Position or extent of motion indicator [2015-04] |
Y10T 137/8242 | . . . | Electrical [2015-04] |
Y10T 137/8259 | . . . | Selection from plural branches [2015-04] |
Y10T 137/8275 | . . . | Indicator element rigidly carried by the movable element whose position is indicated [2015-04] |
Y10T 137/8292 | . . . . | Movable indicator element is a pointer [2015-04] |
Y10T 137/8309 | . . . . . | Pointer integral with handle [2015-04] |
Y10T 137/8326 | . . | Fluid pressure responsive indicator, recorder or alarm [2015-04] |
Y10T 137/8342 | . . | Liquid level responsive indicator, recorder or alarm [2015-04] |
Y10T 137/8359 | . . | Inspection means [2015-04] |
Y10T 137/8376 | . | Combined [2015-04] |
Y10T 137/8593 | . | Systems [2015-04] |
Y10T 137/85938 | . . | Non-valved flow dividers [2015-04] |
Y10T 137/85946 | . . | Faucet connected, sink drained [2015-04] |
Y10T 137/85954 | . . | Closed circulating system [2015-04] |
Y10T 137/85962 | . . . | With thermal circulating means [thermo-siphons] [2015-04] |
Y10T 137/8597 | . . | Main line as motive fluid for follower-type feeder [2015-04] |
Y10T 137/85978 | . . | With pump [2015-04] |
Y10T 137/85986 | . . . | Pumped fluid control [2015-04] |
Y10T 137/85994 | . . . . | Manual [2015-04] |
Y10T 137/86002 | . . . . | Fluid pressure responsive [2015-04] |
Y10T 137/8601 | . . . . . | And pilot valve [2015-04] |
Y10T 137/86019 | . . . . . | Direct response valve [2015-04] |
Y10T 137/86027 | . . . . | Electric [2015-04] |
Y10T 137/86035 | . . . | Combined with fluid receiver [2015-04] |
Y10T 137/86043 | . . . . | Reserve or surge receiver [2015-04] |
Y10T 137/86051 | . . . . | Compressed air supply unit [2015-04] |
Y10T 137/86059 | . . . . | Hydraulic power unit [2015-04] |
Y10T 137/86067 | . . . . | Fluid sump [2015-04] |
Y10T 137/86075 | . . . | And jet-aspiration type pump [2015-04] |
Y10T 137/86083 | . . . | Vacuum pump [2015-04] |
Y10T 137/86091 | . . . | Resiliently mounted pump [2015-04] |
Y10T 137/86099 | . . . | Hand pump [2015-04] |
Y10T 137/86107 | . . . | Multiple inlet with multiple outlet [2015-04] |
Y10T 137/86115 | . . . | Downstream cyclic distributor [2015-04] |
Y10T 137/86123 | . . . . | Distributor part unitary with movable pump part [2015-04] |
Y10T 137/86131 | . . . | Plural [2015-04] |
Y10T 137/86139 | . . . . | Serial [2015-04] |
Y10T 137/86147 | . . . . . | With single motive input [2015-04] |
Y10T 137/86155 | . . . . . . | One pump driven by motive fluid from the other [2015-04] |
Y10T 137/86163 | . . . . | Parallel [2015-04] |
Y10T 137/86171 | . . . | With pump bypass [2015-04] |
Y10T 137/86179 | . . . | Drain valve actuator mounted on pump [2015-04] |
Y10T 137/86187 | . . | Plural tanks or compartments connected for serial flow [2015-04] |
Y10T 137/86196 | . . . | Separable with valved-connecting passage [2015-04] |
Y10T 137/86204 | . . . | Fluid progresses by zigzag flow [2015-04] |
Y10T 137/86212 | . . . | Plural compartments formed by baffles [2015-04] |
Y10T 137/8622 | . . . | Plural top-to-bottom connected tanks [2015-04] |
Y10T 137/86228 | . . . | With communicating opening in common walls of tanks or compartments [2015-04] |
Y10T 137/86236 | . . | Tank with movable or adjustable outlet or overflow pipe [2015-04] |
Y10T 137/86244 | . . . | Horizontally traversing outlet [2015-04] |
Y10T 137/86252 | . . . | Float-supported outlet [2015-04] |
Y10T 137/8626 | . . . | Swinging outlet pipe or spout [2015-04] |
Y10T 137/86268 | . . | With running joint between movable parts of system [2015-04] |
Y10T 137/86276 | . . | Movable tank [2015-04] |
Y10T 137/86284 | . . | With antisplash means not in flow passage [2015-04] |
Y10T 137/86292 | . . | System with plural openings, one a gas vent or access opening [2015-04] |
Y10T 137/863 | . . . | Access and outlet [2015-04] |
Y10T 137/86308 | . . . . | Tank access opening and bottom outlet [2015-04] |
Y10T 137/86316 | . . . . . | Access opening interlock or telltale on outlet valve actuator [2015-04] |
Y10T 137/86324 | . . . | Tank with gas vent and inlet or outlet [2015-04] |
Y10T 137/86332 | . . . . | Vent and inlet or outlet in unitary mounting [2015-04] |
Y10T 137/8634 | . . . | With vented outlet [2015-04] |
Y10T 137/86348 | . . | Tank with internally extending flow guide, pipe or conduit [2015-04] |
Y10T 137/86356 | . . . | Nondraining overflow type [2015-04] |
Y10T 137/86364 | . . . | Inverted "U" passage [2015-04] |
Y10T 137/86372 | . . . | Inlet internally extending [2015-04] |
Y10T 137/86381 | . . | Head-establishing standpipe or expansion chamber [e.g., surge tanks] [2015-04] |
Y10T 137/86389 | . . | Programmer or timer [2015-04] |
Y10T 137/86397 | . . . | With independent valve controller [2015-04] |
Y10T 137/86405 | . . . | Repeating cycle [2015-04] |
Y10T 137/86413 | . . . . | Self-cycling [2015-04] |
Y10T 137/86421 | . . . . | Variable [2015-04] |
Y10T 137/86429 | . . . . . | Attachable and removable element [2015-04] |
Y10T 137/86437 | . . . . . | Adjustable cam [2015-04] |
Y10T 137/86445 | . . . | Plural, sequential, valve actuations [2015-04] |
Y10T 137/86453 | . . . . | Plural trips or trip actuations [2015-04] |
Y10T 137/86461 | . . . . | Variable cycle [2015-04] |
Y10T 137/86469 | . . . | Clock alarm mechanism controlled [2015-04] |
Y10T 137/86477 | . . . | Biased latch, cam operated [2015-04] |
Y10T 137/86485 | . . | Line condition change responsive release of valve [2015-04] |
Y10T 137/86493 | . . | Multi-way valve unit [2015-04] |
Y10T 137/86501 | . . . | Sequential distributor or collector type [2015-04] |
Y10T 137/86509 | . . . | Sequentially progressive opening or closing of plural ports [2015-04] |
Y10T 137/86517 | . . . . | With subsequent closing of first port [2015-04] |
Y10T 137/86525 | . . . . . | Flow combining with flow dividing [2015-04] |
Y10T 137/86533 | . . . . . | Rotary [2015-04] |
Y10T 137/86541 | . . . . . . | Plug [2015-04] |
Y10T 137/86549 | . . . | Selective reciprocation or rotation [2015-04] |
Y10T 137/86558 | . . . | Plural noncommunicating flow paths [2015-04] |
Y10T 137/86566 | . . . . | Rotary plug [2015-04] |
Y10T 137/86574 | . . . | Supply and exhaust [2015-04] |
Y10T 137/86582 | . . . . | Pilot-actuated [2015-04] |
Y10T 137/8659 | . . . . . | Variable orifice-type modulator [2015-04] |
Y10T 137/86598 | . . . . . . | Opposed orifices; interposed modulator [2015-04] |
Y10T 137/86606 | . . . . . | Common to plural valve motor chambers [2015-04] |
Y10T 137/86614 | . . . . . | Electric [2015-04] |
Y10T 137/86622 | . . . . | Motor-operated [2015-04] |
Y10T 137/8663 | . . . . . | Fluid motor [2015-04] |
Y10T 137/86638 | . . . . | Rotary valve [2015-04] |
Y10T 137/86646 | . . . . . | Plug type [2015-04] |
Y10T 137/86654 | . . . . . . | For plural lines [2015-04] |
Y10T 137/86662 | . . . . . . | Axial and radial flow [2015-04] |
Y10T 137/8667 | . . . . | Reciprocating valve [2015-04] |
Y10T 137/86678 | . . . . . | Combined disk or plug and gate or piston [2015-04] |
Y10T 137/86686 | . . . . . | Plural disk or plug [2015-04] |
Y10T 137/86694 | . . . . . | Piston valve [2015-04] |
Y10T 137/86702 | . . . . . . | With internal flow passage [2015-04] |
Y10T 137/8671 | . . . . . . | With annular passage [e.g., spool] [2015-04] |
Y10T 137/86718 | . . . | Dividing into parallel flow paths with recombining [2015-04] |
Y10T 137/86726 | . . . . | Valve with bypass connections [2015-04] |
Y10T 137/86734 | . . . . | With metering feature [2015-04] |
Y10T 137/86743 | . . . . | Rotary [2015-04] |
Y10T 137/86751 | . . . . . | Plug [2015-04] |
Y10T 137/86759 | . . . . | Reciprocating [2015-04] |
Y10T 137/86767 | . . . . . | Spool [2015-04] |
Y10T 137/86775 | . . . . . . | With internal passage [2015-04] |
Y10T 137/86783 | . . . . . . | Unequal heads [2015-04] |
Y10T 137/86791 | . . . . . | Piston [2015-04] |
Y10T 137/86799 | . . . . . . | With internal flow passage [2015-04] |
Y10T 137/86807 | . . . . . . . | Sequential opening or closing of serial ports in single flow line [2015-04] |
Y10T 137/86815 | . . . | Multiple inlet with single outlet [2015-04] |
Y10T 137/86823 | . . . . | Rotary valve [2015-04] |
Y10T 137/86831 | . . . | Selective opening of plural ports [2015-04] |
Y10T 137/86839 | . . . | Four port reversing valves [2015-04] |
Y10T 137/86847 | . . . | Pivoted valve unit [2015-04] |
Y10T 137/86855 | . . . . | Gate [2015-04] |
Y10T 137/86863 | . . . | Rotary valve unit [2015-04] |
Y10T 137/86871 | . . . . | Plug [2015-04] |
Y10T 137/86879 | . . . | Reciprocating valve unit [2015-04] |
Y10T 137/86887 | . . . . | Combined disk or plug and gate or piston [2015-04] |
Y10T 137/86895 | . . . . | Plural disk or plug [2015-04] |
Y10T 137/86903 | . . | Plural petcocks [2015-04] |
Y10T 137/86911 | . . | Sequential distributor or collector type [2015-04] |
Y10T 137/86919 | . . | Sequentially closing and opening alternately seating flow controllers [2015-04] |
Y10T 137/86928 | . . | Sequentially progressive opening or closing of plural valves [2015-04] |
Y10T 137/86936 | . . . | Pressure equalizing or auxiliary shunt flow [2015-04] |
Y10T 137/86944 | . . . . | One valve seats against other valve [e.g., concentric valves] [2015-04] |
Y10T 137/86952 | . . . . . | Locomotive throttle [2015-04] |
Y10T 137/8696 | . . . . . | Gate [2015-04] |
Y10T 137/86968 | . . . . . | With balancing chamber [2015-04] |
Y10T 137/86976 | . . . . . | First valve moves second valve [2015-04] |
Y10T 137/86984 | . . . . . | Actuator moves both valves [2015-04] |
Y10T 137/86992 | . . . | With subsequent closing of first opened port [2015-04] |
Y10T 137/87 | . . . . | Simultaneously moved port controllers [2015-04] |
Y10T 137/87008 | . . . | Screw-actuated differential valves [2015-04] |
Y10T 137/87016 | . . . | Lost motion [2015-04] |
Y10T 137/87024 | . . . . | Cam determines sequence [2015-04] |
Y10T 137/87032 | . . . . | Rotary concentric valves [2015-04] |
Y10T 137/8704 | . . . . | First valve actuates second valve [2015-04] |
Y10T 137/87048 | . . | With preselecting means for plural valve actuator [2015-04] |
Y10T 137/87056 | . . | With selective motion for plural valve actuator [2015-04] |
Y10T 137/87064 | . . . | Oppositely movable cam surfaces [2015-04] |
Y10T 137/87072 | . . . | Rotation about either of two pivotal axes [2015-04] |
Y10T 137/8708 | . . . | Rotation of actuator arm about its pivot and its axis [2015-04] |
Y10T 137/87088 | . . . | Reciprocation along and rotation about same axis [2015-04] |
Y10T 137/87096 | . . | Valves with separate, correlated, actuators [2015-04] |
Y10T 137/87105 | . . . | Correlated across separable flow path joint [2015-04] |
Y10T 137/87113 | . . . | Interlocked [2015-04] |
Y10T 137/87121 | . . . | Coaxial stems [2015-04] |
Y10T 137/87129 | . . . . | Rotary [2015-04] |
Y10T 137/87137 | . . . . . | And reciprocating [2015-04] |
Y10T 137/87145 | . . . . . | Concentric, central valve removable [2015-04] |
Y10T 137/87153 | . . | Plural noncommunicating flow paths [2015-04] |
Y10T 137/87161 | . . . | With common valve operator [2015-04] |
Y10T 137/87169 | . . | Supply and exhaust [2015-04] |
Y10T 137/87177 | . . . | With bypass [2015-04] |
Y10T 137/87185 | . . . . | Controlled by supply or exhaust valve [2015-04] |
Y10T 137/87193 | . . . | Pilot-actuated [2015-04] |
Y10T 137/87201 | . . . . | Common to plural valve motor chambers [2015-04] |
Y10T 137/87209 | . . . . | Electric [2015-04] |
Y10T 137/87217 | . . . | Motor [2015-04] |
Y10T 137/87225 | . . . . | Fluid motor [2015-04] |
Y10T 137/87233 | . . . | Biased exhaust valve [2015-04] |
Y10T 137/87241 | . . . . | Biased closed [2015-04] |
Y10T 137/87249 | . . | Multiple inlet with multiple outlet [2015-04] |
Y10T 137/87257 | . . | Hydraulic brake line [e.g., hill holders] [2015-04] |
Y10T 137/87265 | . . | Dividing into parallel flow paths with recombining [2015-04] |
Y10T 137/87273 | . . . | With fluid coupling [e.g., railway car hose coupling, truck-trailer oil system coupling, etc.] [2015-04] |
Y10T 137/87281 | . . . | System having plural inlets [2015-04] |
Y10T 137/8729 | . . . . | Having digital flow controller [2015-04] |
Y10T 137/87298 | . . . | Having digital flow controller [2015-04] |
Y10T 137/87306 | . . . . | Having plural branches under common control for separate valve actuators [2015-04] |
Y10T 137/87314 | . . . . . | Electromagnetic or electric control [e.g., digital control, bistable electro control, etc.] [2015-04] |
Y10T 137/87322 | . . . | With multi way valve having serial valve in at least one branch [2015-04] |
Y10T 137/8733 | . . . | Fluid pressure regulator in at least one branch [2015-04] |
Y10T 137/87338 | . . . | Flow passage with bypass [2015-04] |
Y10T 137/87346 | . . . . | Including mixing feature [2015-04] |
Y10T 137/87354 | . . . . | Including flowmeter [2015-04] |
Y10T 137/87362 | . . . . | Including cleaning, treating, or heat transfer feature [2015-04] |
Y10T 137/8737 | . . . . . | Water treatment feature [2015-04] |
Y10T 137/87378 | . . . | Second valve assembly carried by first valve head [2015-04] |
Y10T 137/87386 | . . . . | With rotary plug having variable restrictor [2015-04] |
Y10T 137/87394 | . . . . | Carried valve is direct response valve [e.g., check valve, etc.] [2015-04] |
Y10T 137/87402 | . . . | With foam controlling means [e.g., beer, soda faucets] [2015-04] |
Y10T 137/8741 | . . . | With common operator [2015-04] |
Y10T 137/87418 | . . . . | Balanced valve [2015-04] |
Y10T 137/87426 | . . . . | Single resilient member actuates or forms plural passages [2015-04] |
Y10T 137/87434 | . . . . | Valves deform to close passage [2015-04] |
Y10T 137/87442 | . . . . | Rotary valve [2015-04] |
Y10T 137/8745 | . . . . . | Including rigid plate with flexible or resilient seal [2015-04] |
Y10T 137/87458 | . . . . . | Axes of rotation of valves intersect at point [2015-04] |
Y10T 137/87467 | . . . . . | Axes of rotation parallel [2015-04] |
Y10T 137/87475 | . . . . . . | Adjacent plate valves always parallel [2015-04] |
Y10T 137/87483 | . . . . . . | Adjacent plate valves counter rotate [2015-04] |
Y10T 137/87491 | . . . . | Mechanical movement between actuator and non-rotary valve [2015-04] |
Y10T 137/87499 | . . . | Fluid actuated or retarded [2015-04] |
Y10T 137/87507 | . . . | Electrical actuator [2015-04] |
Y10T 137/87515 | . . . | Mechanical movement between actuator and valve [2015-04] |
Y10T 137/87523 | . . . | Rotary valve [2015-04] |
Y10T 137/87531 | . . . . | Butterfly valve [2015-04] |
Y10T 137/87539 | . . . | Having guide or restrictor [2015-04] |
Y10T 137/87547 | . . . . | Manually variable [2015-04] |
Y10T 137/87555 | . . . | Having direct response valve [e.g., check valve, etc.] [2015-04] |
Y10T 137/87563 | . . . . | With reverse flow direction [2015-04] |
Y10T 137/87571 | . . | Multiple inlet with single outlet [2015-04] |
Y10T 137/87579 | . . . | Faucet attachment [2015-04] |
Y10T 137/87587 | . . . | Combining by aspiration [2015-04] |
Y10T 137/87595 | . . . . | Combining of three or more diverse fluids [2015-04] |
Y10T 137/87603 | . . . . | Plural motivating fluid jets [2015-04] |
Y10T 137/87611 | . . . . | Flow control by varying position of a fluid inlet relative to entrainment chamber [2015-04] |
Y10T 137/87619 | . . . . | With selectively operated flow control means in inlet [2015-04] |
Y10T 137/87627 | . . . . . | Flow control means is located in aspirated fluid inlet [2015-04] |
Y10T 137/87635 | . . . . . . | Single actuator operates flow control means located in both motivating fluid and aspirated fluid inlets [2015-04] |
Y10T 137/87643 | . . . . | With condition responsive valve [2015-04] |
Y10T 137/87652 | . . . | With means to promote mixing or combining of plural fluids [2015-04] |
Y10T 137/8766 | . . . . | With selectively operated flow control means [2015-04] |
Y10T 137/87668 | . . . . . | Single actuator operates plural flow control means [2015-04] |
Y10T 137/87676 | . . . | With flow control [2015-04] |
Y10T 137/87684 | . . . . | Valve in each inlet [2015-04] |
Y10T 137/87692 | . . . . . | With common valve operator [2015-04] |
Y10T 137/877 | . . | With flow control means for branched passages [2015-04] |
Y10T 137/87708 | . . . | With common valve operator [2015-04] |
Y10T 137/87716 | . . . . | For valve having a flexible diaphragm valving member [2015-04] |
Y10T 137/87724 | . . . . | For valve having a ball head [2015-04] |
Y10T 137/87732 | . . . . | With gearing [2015-04] |
Y10T 137/8774 | . . . . | Threaded actuator [2015-04] |
Y10T 137/87748 | . . . . | Pivoted or rotary motion converted to reciprocating valve head motion [2015-04] |
Y10T 137/87756 | . . . . . | Spring biased [2015-04] |
Y10T 137/87764 | . . . . | Having fluid actuator [2015-04] |
Y10T 137/87772 | . . . . | With electrical actuation [2015-04] |
Y10T 137/8778 | . . . . | Spring biased [2015-04] |
Y10T 137/87788 | . . . | With valve or movable deflector at junction [2015-04] |
Y10T 137/87796 | . . . . | Movable deflector spout in lateral port [2015-04] |
Y10T 137/87804 | . . . . | Valve or deflector is tubular passageway [2015-04] |
Y10T 137/87812 | . . . . | Pivoted valve or deflector [2015-04] |
Y10T 137/8782 | . . . . | Rotary valve or deflector [2015-04] |
Y10T 137/87829 | . . . | Biased valve [2015-04] |
Y10T 137/87837 | . . . . | Spring bias [2015-04] |
Y10T 137/87845 | . . . . . | For valve having a ball head [2015-04] |
Y10T 137/87853 | . . . . . | With threaded actuator [2015-04] |
Y10T 137/87861 | . . . . . | Spring coaxial with valve [2015-04] |
Y10T 137/87869 | . . . . . . | Biased open [2015-04] |
Y10T 137/87877 | . . . | Single inlet with multiple distinctly valved outlets [2015-04] |
Y10T 137/87885 | . . . | Sectional block structure [2015-04] |
Y10T 137/87893 | . . . | With fluid actuator [2015-04] |
Y10T 137/87901 | . . . | With threaded actuator [2015-04] |
Y10T 137/87909 | . . . | Containing rotary valve [2015-04] |
Y10T 137/87917 | . . | Flow path with serial valves and/or closures [2015-04] |
Y10T 137/87925 | . . . | Separable flow path section, valve or closure in each [2015-04] |
Y10T 137/87933 | . . . . | Common joint and valve seat faces, or sections joined by closing members [2015-04] |
Y10T 137/87941 | . . . . | Each valve and/or closure operated by coupling motion [2015-04] |
Y10T 137/87949 | . . . . . | Linear motion of flow path sections operates both [2015-04] |
Y10T 137/87957 | . . . . . . | Valves actuate each other [2015-04] |
Y10T 137/87965 | . . . . | Valve- or closure-operated by coupling motion [2015-04] |
Y10T 137/87973 | . . . . | Coupling interlocked with valve, or closure or actuator [2015-04] |
Y10T 137/87981 | . . . | Common actuator [2015-04] |
Y10T 137/87989 | . . . . | Delivery cock with terminal valve [2015-04] |
Y10T 137/87997 | . . . . | Alternately seating [2015-04] |
Y10T 137/88005 | . . . . . | Biased valve [2015-04] |
Y10T 137/88014 | . . . . | Opposed screw [2015-04] |
Y10T 137/88022 | . . . | One valve head provides seat for other head [2015-04] |
Y10T 137/8803 | . . . . | Also carries head of other valve [2015-04] |
Y10T 137/88038 | . . . | One valve head carries other valve head [2015-04] |
Y10T 137/88046 | . . . | Biased valve with external operator [2015-04] |
Y10T 137/88054 | . . . | Direct response normally closed valve limits direction of flow [2015-04] |
Y10T 137/88062 | . . . | Coaxial oppositely directed seats [2015-04] |
Y10T 137/8807 | . . | Articulated or swinging flow conduit [2015-04] |
Y10T 137/88078 | . . . | Actuates valve [2015-04] |
Y10T 137/88086 | . . . . | Plural motions of valve [2015-04] |
Y10T 137/88094 | . . . . | Reciprocating valve [2015-04] |
Y10T 137/88102 | . . . . | Rotary valve [2015-04] |
Y10T 137/8811 | . | Frangible [2015-04] |
Y10T 137/9029 | . | With coupling [2015-04] |
Y10T 137/9138 | . . | Flexible [2015-04] |
Y10T 137/9247 | . | With closure [2015-04] |
Y10T 137/9464 | . | Faucets and spouts [2015-04] |
Y10T 137/9682 | . | Miscellaneous [2015-04] |
Former US Class 152 Series [2015-01] |
Y10T 152/00 | Resilient tires and wheels [2015-01] |
Y10T 152/10 | . | Tires, resilient [2015-01] |
Y10T 152/10009 | . . | Emergency [2015-01] |
Y10T 152/10018 | . . | with splash guards [2015-01] |
Y10T 152/10027 | . . | with wear indicating feature [2015-01] |
Y10T 152/10036 | . . | Cushion and pneumatic combined [2015-01] |
Y10T 152/10045 | . . . | Metallic spring cushion [2015-01] |
Y10T 152/10054 | . . . | Enclosed cushion [2015-01] |
Y10T 152/10063 | . . . | Superimposed [2015-01] |
Y10T 152/10072 | . . . . | Plungers [2015-01] |
Y10T 152/10081 | . . . . | Edge-secured cushion [2015-01] |
Y10T 152/1009 | . . . . | Guide flanges [2015-01] |
Y10T 152/10099 | . . . . . | Radial stops [2015-01] |
Y10T 152/10108 | . . . . . . | Bolts or studs [2015-01] |
Y10T 152/10117 | . . . | Integral [2015-01] |
Y10T 152/10126 | . . . . | with removable inner tube [2015-01] |
Y10T 152/10135 | . . | Armored [2015-01] |
Y10T 152/10144 | . . . | Single tube tires internal [2015-01] |
Y10T 152/10153 | . . . . | Metal [2015-01] |
Y10T 152/10162 | . . . . . | Plates [2015-01] |
Y10T 152/10171 | . . . | Casing construction [2015-01] |
Y10T 152/1018 | . . . . | Embedded [2015-01] |
Y10T 152/10189 | . . . . . | Metal [2015-01] |
Y10T 152/10198 | . . . . . . | Plates [2015-01] |
Y10T 152/10207 | . . . . . . | Annular [2015-01] |
Y10T 152/10216 | . . . . . . | Linked mat [2015-01] |
Y10T 152/10225 | . . . . . . | Woven [2015-01] |
Y10T 152/10234 | . . . | Interliners [2015-01] |
Y10T 152/10243 | . . . . | Cotton, fabric, or rubber [2015-01] |
Y10T 152/10252 | . . . . | Metal [2015-01] |
Y10T 152/10261 | . . . . . | Scale armor [2015-01] |
Y10T 152/1027 | . . . . . | Annular [2015-01] |
Y10T 152/10279 | . . | Cushion [2015-01] |
Y10T 152/10288 | . . . | Sectional [2015-01] |
Y10T 152/10297 | . . . . | Annular [2015-01] |
Y10T 152/10306 | . . . . . | Superimposed [2015-01] |
Y10T 152/10315 | . . . . | Superimposed [2015-01] |
Y10T 152/10324 | . . . . | with apertured external binders [2015-01] |
Y10T 152/10333 | . . . . | Radial bolt secured [2015-01] |
Y10T 152/10342 | . . . . | Abutting sections [2015-01] |
Y10T 152/10351 | . . . . . | with annular internal binders [2015-01] |
Y10T 152/1036 | . . . . . | Interfitting [2015-01] |
Y10T 152/10369 | . . . . . | Indented at joints [2015-01] |
Y10T 152/10378 | . . . | Casing enclosed core [2015-01] |
Y10T 152/10387 | . . . . | Separate core [2015-01] |
Y10T 152/10396 | . . . . . | Removable [2015-01] |
Y10T 152/10405 | . . . . . . | Sponge rubber [2015-01] |
Y10T 152/10414 | . . . . . . | with core compression [2015-01] |
Y10T 152/10423 | . . . . . . | Superimposed rings [2015-01] |
Y10T 152/10432 | . . . . . . | Sectional transversely [2015-01] |
Y10T 152/10441 | . . . . . . . | Balls [2015-01] |
Y10T 152/1045 | . . . . . . | Integral structure [2015-01] |
Y10T 152/10459 | . . . . . . . | Recessed [2015-01] |
Y10T 152/10468 | . . . . . . . . | Chambered [2015-01] |
Y10T 152/10477 | . . . . . . . | Perforated [2015-01] |
Y10T 152/10486 | . . . . . . . | Chambered [2015-01] |
Y10T 152/10495 | . . | Pneumatic tire or inner tube [2015-01] |
Y10T 152/10504 | . . . | Asymmetric tire [2015-01] |
Y10T 152/10513 | . . . | Tire reinforcement material characterized by short length fibers or the like [2015-01] |
Y10T 152/10522 | . . . | Multiple chamber [2015-01] |
Y10T 152/10531 | . . . . | Cylinder and piston [2015-01] |
Y10T 152/1054 | . . . . . | Mutually free walls [2015-01] |
Y10T 152/10549 | . . . . . . | Interfitting [2015-01] |
Y10T 152/10558 | . . . . . . | Balls [2015-01] |
Y10T 152/10567 | . . . . . . | with simultaneous inflating means [2015-01] |
Y10T 152/10576 | . . . . | Annular chambers [2015-01] |
Y10T 152/10585 | . . . . . | with simultaneous inflating means [2015-01] |
Y10T 152/10594 | . . . . . | Mutually free walls [2015-01] |
Y10T 152/10603 | . . . . . . | with simultaneous inflating means [2015-01] |
Y10T 152/10612 | . . . . . | with simultaneous inflating means [2015-01] |
Y10T 152/10621 | . . . | Sectional casings [2015-01] |
Y10T 152/1063 | . . . . | Circumferential [2015-01] |
Y10T 152/10639 | . . . . . | Rigid inner sections [2015-01] |
Y10T 152/10648 | . . . | with means restricting relative movement between tire and inner tube [e.g., anti-creep feature, etc.] [2015-01] |
Y10T 152/10657 | . . . | with means to protect inner tube from rim [2015-01] |
Y10T 152/10666 | . . . | Automatic sealing of punctures [e.g., self-healing, etc.] [2015-01] |
Y10T 152/10675 | . . . . | Using flowable coating or composition [2015-01] |
Y10T 152/10684 | . . . . . | On inner surface of tubeless tire [2015-01] |
Y10T 152/10693 | . . . . . . | Sealant in plural layers or plural pockets [2015-01] |
Y10T 152/10702 | . . . . . | within or part of construction of inflating inner tube [2015-01] |
Y10T 152/10711 | . . . . . . | Sealant in plural layers or plural pockets [2015-01] |
Y10T 152/1072 | . . . . | by compression [2015-01] |
Y10T 152/10729 | . . . . | with reinflating means [2015-01] |
Y10T 152/10738 | . . . | with means to protect tire from rim [2015-01] |
Y10T 152/10747 | . . . | Means other than rim closing the tire opening [2015-01] |
Y10T 152/10756 | . . . . | Positive casing closure [2015-01] |
Y10T 152/10765 | . . . | Characterized by belt or breaker structure [2015-01] |
Y10T 152/10774 | . . . . | Consisting of only one ply [2015-01] |
Y10T 152/10783 | . . . . | Reinforcing plies made up from wound narrow ribbons [2015-01] |
Y10T 152/10792 | . . . . | Structure where each bias angle reinforcing cord ply has no opposingly angled ply [2015-01] |
Y10T 152/10801 | . . . . | Structure made up of two or more sets of plies wherein the reinforcing cords in one set lie in a different angular position relative to those in other sets [2015-01] |
Y10T 152/1081 | . . . . | Breaker or belt characterized by the chemical composition or physical properties of elastomer or the like [2015-01] |
Y10T 152/10819 | . . . | Characterized by the structure of the bead portion of the tire [2015-01] |
Y10T 152/10828 | . . . . | Chafer or sealing strips [2015-01] |
Y10T 152/10837 | . . . . | Bead characterized by the radial extent of apex, flipper or chafer into tire sidewall [2015-01] |
Y10T 152/10846 | . . . . | Bead characterized by the chemical composition and or physical properties of elastomers or the like [2015-01] |
Y10T 152/10855 | . . . | Characterized by the carcass, carcass material, or physical arrangement of the carcass materials [2015-01] |
Y10T 152/10864 | . . . . | Sidewall stiffening or reinforcing means other than main carcass plies or foldups thereof about beads [2015-01] |
Y10T 152/10873 | . . . . | with two or more differing cord materials [2015-01] |
Y10T 152/10882 | . . | Patches [2015-01] |
Y10T 152/10891 | . . . | Mechanically secured [2015-01] |
Y10T 152/109 | . . . . | Inside and outside, bolt connected [2015-01] |
Y10T 152/10909 | . . . | with plugs [2015-01] |
Y10T 152/10918 | . . . | Bandages [2015-01] |
Y10T 152/10927 | . . . . | Mechanically secured [2015-01] |
Y10T 152/10936 | . . . . . | to felly or rim [2015-01] |
Former US Class 156 Series [2015-01] |
Y10T 156/00 | Adhesive bonding and miscellaneous chemical manufacture [2015-01] |
Y10T 156/10 | . | Methods of surface bonding and/or assembly therefor [2015-01] |
Y10T 156/1002 | . . | with permanent bending or reshaping or surface deformation of self sustaining lamina [2015-01] |
Y10T 156/1003 | . . . | by separating laminae between spaced secured areas [e.g., honeycomb expanding] [2015-01] |
Y10T 156/1005 | . . . | by inward collapsing of portion of hollow body [2015-01] |
Y10T 156/1007 | . . . | Running or continuous length work [2015-01] |
Y10T 156/1008 | . . . . | Longitudinal bending [2015-01] |
Y10T 156/101 | . . . . . | Prior to or during assembly with additional lamina [2015-01] |
Y10T 156/1011 | . . . . . | Overedge bending or overedge folding [2015-01] |
Y10T 156/1013 | . . . . . | and edge-joining of one piece blank to form tube [2015-01] |
Y10T 156/1015 | . . . . | Folding [2015-01] |
Y10T 156/1016 | . . . . | Transverse corrugating [2015-01] |
Y10T 156/1018 | . . . . . | Subsequent to assembly of laminae [2015-01] |
Y10T 156/102 | . . . . . | with deformation or cutting of corrugated lamina [2015-01] |
Y10T 156/1021 | . . . . . | Treating material of corrugated lamina or dry adhesive thereon to render tacky [2015-01] |
Y10T 156/1023 | . . . . | Surface deformation only [e.g., embossing] [2015-01] |
Y10T 156/1025 | . . . | to form undulated to corrugated sheet and securing to base with parts of shaped areas out of contact [2015-01] |
Y10T 156/1026 | . . . | with slitting or removal of material at reshaping area prior to reshaping [2015-01] |
Y10T 156/1028 | . . . | by bending, drawing or stretch forming sheet to assume shape of configured lamina while in contact therewith [2015-01] |
Y10T 156/103 | . . . . | Encasing or enveloping the configured lamina [2015-01] |
Y10T 156/1031 | . . . . | with preshaping of lamina [2015-01] |
Y10T 156/1033 | . . . . | Flexible sheet to cylinder lamina [2015-01] |
Y10T 156/1034 | . . . | Overedge bending of lamina about edges of sheetlike base [2015-01] |
Y10T 156/1036 | . . . | Bending of one piece blank and joining edges to form article [2015-01] |
Y10T 156/1038 | . . . . | Hollow cylinder article [2015-01] |
Y10T 156/1039 | . . . | Surface deformation only of sandwich or lamina [e.g., embossed panels] [2015-01] |
Y10T 156/1041 | . . . . | Subsequent to lamination [2015-01] |
Y10T 156/1043 | . . . | Subsequent to assembly [2015-01] |
Y10T 156/1044 | . . . . | of parallel stacked sheets only [2015-01] |
Y10T 156/1046 | . . . . . | Bending of one lamina only [2015-01] |
Y10T 156/1048 | . . . . . | to form dished or receptacle-like product [2015-01] |
Y10T 156/1049 | . . . . | Folding only [2015-01] |
Y10T 156/1051 | . . . | by folding [2015-01] |
Y10T 156/1052 | . . | with cutting, punching, tearing or severing [2015-01] |
Y10T 156/1054 | . . . | and simultaneously bonding [e.g., cut-seaming] [2015-01] |
Y10T 156/1056 | . . . | Perforating lamina [2015-01] |
Y10T 156/1057 | . . . . | Subsequent to assembly of laminae [2015-01] |
Y10T 156/1059 | . . . | Splitting sheet lamina in plane intermediate of faces [2015-01] |
Y10T 156/1061 | . . . | Spiral peeling [2015-01] |
Y10T 156/1062 | . . . | Prior to assembly [2015-01] |
Y10T 156/1064 | . . . . | Partial cutting [e.g., grooving or incising] [2015-01] |
Y10T 156/1066 | . . . . | Cutting to shape joining edge surfaces only [2015-01] |
Y10T 156/1067 | . . . . | Continuous longitudinal slitting [2015-01] |
Y10T 156/1069 | . . . . . | Bonding face to face of laminae cut from single sheet [2015-01] |
Y10T 156/107 | . . . . | Punching and bonding pressure application by punch [2015-01] |
Y10T 156/1072 | . . . . . | Closure cap liner applying type [2015-01] |
Y10T 156/1074 | . . . . | Separate cutting of separate sheets or webs [2015-01] |
Y10T 156/1075 | . . . . | of plural laminae from single stock and assembling to each other or to additional lamina [2015-01] |
Y10T 156/1077 | . . . . . | Applying plural cut laminae to single face of additional lamina [2015-01] |
Y10T 156/1079 | . . . . . | Joining of cut laminae end-to-end [2015-01] |
Y10T 156/108 | . . . | Flash, trim or excess removal [2015-01] |
Y10T 156/1082 | . . . | Partial cutting bonded sandwich [e.g., grooving or incising] [2015-01] |
Y10T 156/1084 | . . . | of continuous or running length bonded web [2015-01] |
Y10T 156/1085 | . . . . | One web only [2015-01] |
Y10T 156/1087 | . . . . | Continuous longitudinal slitting [2015-01] |
Y10T 156/1089 | . . | of discrete laminae to single face of additional lamina [2015-01] |
Y10T 156/109 | . . . | Embedding of laminae within face of additional laminae [2015-01] |
Y10T 156/1092 | . . . | All laminae planar and face to face [2015-01] |
Y10T 156/1093 | . . . . | with covering of discrete laminae with additional lamina [2015-01] |
Y10T 156/1095 | . . . . . | Opposed laminae are running length webs [2015-01] |
Y10T 156/1097 | . . . . | Lamina is running length web [2015-01] |
Y10T 156/1098 | . . . . . | Feeding of discrete laminae from separate sources [2015-01] |
Y10T 156/11 | . | Methods of delaminating, per se; i.e. , separating at bonding face [2015-01] |
Y10T 156/1105 | . . | Delaminating process responsive to feed or shape at delamination [2015-01] |
Y10T 156/1111 | . . | Using solvent during delaminating [e.g., water dissolving adhesive at bonding face during delamination, etc.] [2015-01] |
Y10T 156/1116 | . . . | Using specified organic delamination solvent [2015-01] |
Y10T 156/1121 | . . | Using vibration during delaminating [2015-01] |
Y10T 156/1126 | . . | Using direct fluid current against work during delaminating [2015-01] |
Y10T 156/1132 | . . . | Using vacuum directly against work during delaminating [2015-01] |
Y10T 156/1137 | . . . | Using air blast directly against work during delaminating [2015-01] |
Y10T 156/1142 | . . | Changing dimension during delaminating [e.g., crushing, expanding, warping, etc.] [2015-01] |
Y10T 156/1147 | . . . | Using shrinking or swelling agent during delaminating [2015-01] |
Y10T 156/1153 | . . | Temperature change for delamination [e.g., heating during delaminating, etc.] [2015-01] |
Y10T 156/1158 | . . . | Electromagnetic radiation applied to work for delamination [e.g., microwave, uv, ir, etc.] [2015-01] |
Y10T 156/1163 | . . . | Sintering for delamination [2015-01] |
Y10T 156/1168 | . . | Gripping and pulling work apart during delaminating [2015-01] |
Y10T 156/1174 | . . . | Using roller for delamination [e.g., roller pairs operating at differing speeds or directions, etc.] [2015-01] |
Y10T 156/1179 | . . . | with poking during delaminating [e.g., jabbing, etc.] [2015-01] |
Y10T 156/1184 | . . . . | Piercing layer during delaminating [e.g., cutting, etc.] [2015-01] |
Y10T 156/1189 | . . . | with shearing during delaminating [2015-01] |
Y10T 156/1195 | . . . | Delaminating from release surface [2015-01] |
Y10T 156/12 | . | Surface bonding means and/or assembly means with cutting, punching, piercing, severing or tearing [2015-01] |
Y10T 156/125 | . . | Plural severing means each acting on a different work piece [2015-01] |
Y10T 156/13 | . . | Severing followed by associating with part from same source [2015-01] |
Y10T 156/1304 | . . | Means making hole or aperture in part to be laminated [2015-01] |
Y10T 156/1309 | . . . | and securing separate part over hole or aperture [2015-01] |
Y10T 156/1313 | . . | Cutting element simultaneously bonds [e.g., cut seaming] [2015-01] |
Y10T 156/1317 | . . | Means feeding plural workpieces to be joined [2015-01] |
Y10T 156/1322 | . . . | Severing before bonding or assembling of parts [2015-01] |
Y10T 156/1326 | . . . . | Severing means or member secured thereto also bonds [2015-01] |
Y10T 156/133 | . . . . | Delivering cut part to indefinite or running length web [2015-01] |
Y10T 156/1335 | . . . . . | Cutter also delivers cut piece [2015-01] |
Y10T 156/1339 | . . . . | Delivering cut part in sequence to serially conveyed articles [2015-01] |
Y10T 156/1343 | . . . | Cutting indefinite length web after assembly with discrete article [2015-01] |
Y10T 156/1348 | . . | Work traversing type [2015-01] |
Y10T 156/1352 | . . . | with liquid applying means [2015-01] |
Y10T 156/1357 | . . . . | Slitting and severing [2015-01] |
Y10T 156/1361 | . . . . | Cutting after bonding [2015-01] |
Y10T 156/1365 | . . . | Fixed cutter [2015-01] |
Y10T 156/137 | . . | Stamp from multiple row sheet type [2015-01] |
Y10T 156/1374 | . . | with means projecting fluid against work [2015-01] |
Y10T 156/1378 | . . | Cutter actuated by or secured to bonding element [2015-01] |
Y10T 156/1383 | . . . | with liquid applicator [2015-01] |
Y10T 156/1387 | . . . . | Common actuator for bonding and liquid applying means [2015-01] |
Y10T 156/1391 | . . . . . | Liquid applied to web before cutting [2015-01] |
Y10T 156/1396 | . . . . . . | Roller applicator [2015-01] |
Y10T 156/14 | . | Surface bonding means and/or assembly means with shaping, scarifying, or cleaning joining surface only [2015-01] |
Y10T 156/15 | . | Combined or convertible surface bonding means and/or assembly means [2015-01] |
Y10T 156/16 | . | Surface bonding means and/or assembly means with bond interfering means [slip sheet, etc. ] [2015-01] |
Y10T 156/17 | . | Surface bonding means and/or assemblymeans with work feeding or handling means [2015-01] |
Y10T 156/1702 | . . | For plural parts or plural areas of single part [2015-01] |
Y10T 156/1705 | . . . | Lamina transferred to base from adhered flexible web or sheet type carrier [2015-01] |
Y10T 156/1707 | . . . . | Discrete spaced laminae on adhered carrier [2015-01] |
Y10T 156/171 | . . . . . | Means serially presenting discrete base articles or separate portions of a single article [2015-01] |
Y10T 156/1712 | . . . | Indefinite or running length work [2015-01] |
Y10T 156/1715 | . . . . | Means joining indefinite length work edge to edge [2015-01] |
Y10T 156/1717 | . . . . . | Means applying adhesively secured tape to seam [2015-01] |
Y10T 156/172 | . . . . . | Means applying fluid adhesive to work edge [2015-01] |
Y10T 156/1722 | . . . . | Means applying fluent adhesive or adhesive activator material between layers [2015-01] |
Y10T 156/1724 | . . . . . | At spaced areas [2015-01] |
Y10T 156/1727 | . . . . . | Plural indefinite length or running length workpieces [2015-01] |
Y10T 156/1729 | . . . . . . | Fluid applied to nip between indefinite length webs [2015-01] |
Y10T 156/1732 | . . . . . . | Fluid applied to plural workpieces [2015-01] |
Y10T 156/1734 | . . . . | Means bringing articles into association with web [2015-01] |
Y10T 156/1737 | . . . . | Discontinuous, spaced area, and/or patterned pressing [2015-01] |
Y10T 156/1739 | . . . . | Webs of different width, longitudinally aligned [2015-01] |
Y10T 156/1741 | . . . . | Progressive continuous bonding press [e.g., roll couples] [2015-01] |
Y10T 156/1744 | . . . | Means bringing discrete articles into assembled relationship [2015-01] |
Y10T 156/1746 | . . . . | Plural lines and/or separate means assembling separate sandwiches [2015-01] |
Y10T 156/1749 | . . . . | All articles from single source only [2015-01] |
Y10T 156/1751 | . . . . | At least three articles [2015-01] |
Y10T 156/1754 | . . . . . | At least two applied side by side to common base [2015-01] |
Y10T 156/1756 | . . . . . . | Plural ranks [2015-01] |
Y10T 156/1759 | . . . . . . | Sheet form common base [2015-01] |
Y10T 156/1761 | . . . . . | Stacked serially [2015-01] |
Y10T 156/1763 | . . . . | Magazine stack directly contacting separate work [2015-01] |
Y10T 156/1766 | . . . . . | Magazine movable to work [2015-01] |
Y10T 156/1768 | . . . . | Means simultaneously conveying plural articles from a single source and serially presenting them to an assembly station [2015-01] |
Y10T 156/1771 | . . . . . | Turret or rotary drum-type conveyor [2016-05] |
Y10T 156/1773 | . . . . . . | For flexible sheets [2015-01] |
Y10T 156/1776 | . . . . | Means separating articles from bulk source [2015-01] |
Y10T 156/1778 | . . . . . | Stacked sheet source [2015-01] |
Y10T 156/178 | . . . . . . | Rotary or pivoted picker [2015-01] |
Y10T 156/1783 | . . . . . . | Translating picker [2015-01] |
Y10T 156/1785 | . . | Magazine stack directly contacting work [2015-01] |
Y10T 156/1788 | . . | Work traversing type and/or means applying work to wall or static structure [2015-01] |
Y10T 156/179 | . . . | with liquid applying means [2015-01] |
Y10T 156/1793 | . . . | Grip or clamp for web end [2015-01] |
Y10T 156/1795 | . . . | Implement carried web supply [2015-01] |
Y10T 156/1798 | . . | with liquid adhesive or adhesive activator applying means [2015-01] |
Y10T 156/18 | . | Surface bonding means and/or assembly means with handle or handgrip [2015-01] |
Y10T 156/19 | . | Delaminating means [2015-01] |
Y10T 156/1906 | . . | Delaminating means responsive to feed or shape at delamination [2015-01] |
Y10T 156/1911 | . . | Heating or cooling delaminating means [e.g., melting means, freezing means, etc.] [2015-01] |
Y10T 156/1917 | . . . | Electromagnetic radiation delaminating means [e.g., microwave, uv, ir, etc.] [2015-01] |
Y10T 156/1922 | . . | Vibrating delaminating means [2015-01] |
Y10T 156/1928 | . . | Differential fluid pressure delaminating means [2015-01] |
Y10T 156/1933 | . . . | Spraying delaminating means [e.g., atomizer, etc. [2015-01] |
Y10T 156/1939 | . . . . | Air blasting delaminating means] [2015-01] |
Y10T 156/1944 | . . . | Vacuum delaminating means [e.g., vacuum chamber, etc.] [2015-01] |
Y10T 156/195 | . . | Delaminating roller means [2015-01] |
Y10T 156/1956 | . . . | Roller pair delaminating means [2015-01] |
Y10T 156/1961 | . . | Severing delaminating means [e.g., chisel, etc.] [2015-01] |
Y10T 156/1967 | . . . | Cutting delaminating means [2015-01] |
Y10T 156/1972 | . . . . | Shearing delaminating means [2015-01] |
Y10T 156/1978 | . . | Delaminating bending means [2015-01] |
Y10T 156/1983 | . . . | Poking delaminating means [2015-01] |
Y10T 156/1989 | . . . | Corner edge bending delaminating means [2015-01] |
Y10T 156/1994 | . . | Means for delaminating from release surface [2015-01] |
Former US Class 225 series [2015-04] |
Y10T 225/00 | Severing by tearing or breaking [2015-04] |
Y10T 225/10 | . | Methods [2015-04] |
Y10T 225/12 | . . | With preliminary weakening [2015-04] |
Y10T 225/14 | . . | Longitudinally of direction of feed [2015-04] |
Y10T 225/16 | . . | Transversely of continuously fed work [2015-04] |
Y10T 225/18 | . . . | Progressively to or from one side edge [2015-04] |
Y10T 225/20 | . | Severing by manually forcing against fixed edge [2015-04] |
Y10T 225/201 | . . | With other type severing means [2015-04] |
Y10T 225/202 | . . | With timer-released means for preventing work feed-out [2015-04] |
Y10T 225/203 | . . | Including means to effect bias cut [2015-04] |
Y10T 225/205 | . . | With feed-out of predetermined length from work supply [2015-04] |
Y10T 225/206 | . . . | Including means to select or adjust feed-out length [2015-04] |
Y10T 225/207 | . . . | Including feed-out stop for manually pulled work [2015-04] |
Y10T 225/208 | . . . . | Stop abuts work edge or work-mounted article [2015-04] |
Y10T 225/209 | . . . . | With feed-out of lead-end to aid initial grasping [2015-04] |
Y10T 225/21 | . . . | Merely to provide lead-end for manual grasping [2015-04] |
Y10T 225/211 | . . . | Manually operated feed-out mechanism [2015-04] |
Y10T 225/213 | . . | With indicator [2015-04] |
Y10T 225/214 | . . . | Indicates length to be severed from supply [2015-04] |
Y10T 225/215 | . . | With blade-edge guard [2015-04] |
Y10T 225/216 | . . . | Movable [2015-04] |
Y10T 225/217 | . . | Work stripped from blade by relatively movable means [2015-04] |
Y10T 225/218 | . . . | Including movable blade [2015-04] |
Y10T 225/22 | . . | With means to move work toward or into severing position [2015-04] |
Y10T 225/221 | . . . | With means to strip adhering work therefrom [2015-04] |
Y10T 225/222 | . . | With work-immobilizing paster surface [2015-04] |
Y10T 225/223 | . . . | With finger-access opening [2015-04] |
Y10T 225/224 | . . | With means to hold pad or stack of individual sheets [2015-04] |
Y10T 225/225 | . . . | With means to separate severed end of stub from supply package [2015-04] |
Y10T 225/226 | . . . | With changeable blade-edge contour [2015-04] |
Y10T 225/228 | . . . . | Slidable notcher [2015-04] |
Y10T 225/229 | . . . | Blade slidable along plane of work surface [2015-04] |
Y10T 225/23 | . . | Zigzag-folded supply package [2015-04] |
Y10T 225/231 | . . | Separate blades usable alternatively or sequentially on same work supply [2015-04] |
Y10T 225/232 | . . | Plural supply sources [2015-04] |
Y10T 225/233 | . . . | On turret-type support with single blade [2015-04] |
Y10T 225/234 | . . . | With movable blade registrable selectively with each source [2015-04] |
Y10T 225/236 | . . . | With plural blades [2015-04] |
Y10T 225/237 | . . . . | With individual blade for each source [2015-04] |
Y10T 225/238 | . . | With housing for work supply [2015-04] |
Y10T 225/239 | . . . | Liquid-, gas-, or light-tight work passage [2015-04] |
Y10T 225/24 | . . . | With inspection window or transparent panel [2015-04] |
Y10T 225/241 | . . . | With mounting means for housing [2015-04] |
Y10T 225/243 | . . . | Blade on pivoted closure for housing [2015-04] |
Y10T 225/244 | . . . | Sectional telescoping housing [2015-04] |
Y10T 225/245 | . . . . | Including removable cap or sleeve enclosure for spooled work supply [2015-04] |
Y10T 225/246 | . . . | Including special support for wound supply package [2015-04] |
Y10T 225/247 | . . . . | Bearing or trunnions to engage package core [2015-04] |
Y10T 225/248 | . . . | Single blank container [2015-04] |
Y10T 225/249 | . . . . | Blade unitary with container [2015-04] |
Y10T 225/251 | . . . . | With closure fastener [2015-04] |
Y10T 225/252 | . . . | With brake or tensioner [2015-04] |
Y10T 225/253 | . . . . | Restricted or restrictable work outlet [2015-04] |
Y10T 225/254 | . . . | With finger-access opening to facilitate work feed-out [2015-04] |
Y10T 225/255 | . . . | With internal guide [2015-04] |
Y10T 225/256 | . . | Blade carrier bodily and slidably supported on running length work [2015-04] |
Y10T 225/257 | . . | Blade mounted on hand-held wound package [2015-04] |
Y10T 225/259 | . . . | With lead-end stripper for tacky adhesive work [2015-04] |
Y10T 225/26 | . . . | By resiliently embracing outer circumference of package [2015-04] |
Y10T 225/261 | . . . | Work supply nonrotatably wound on flanged spool [2015-04] |
Y10T 225/262 | . . . . | Circumferentially movable blade radially retained by beaded or grooved flanges [2015-04] |
Y10T 225/263 | . . . . | Blade carrier supports hollow spool for rotation [2015-04] |
Y10T 225/264 | . . . . | Flange edge notched to provide or coact with cutter [2015-04] |
Y10T 225/266 | . . . . | With clamp for lead-end of strand-type work [2015-04] |
Y10T 225/267 | . . . . . | Strand clamped against flange [2015-04] |
Y10T 225/268 | . . . | By resiliently engaging package ends or interior of core [2015-04] |
Y10T 225/269 | . . . | Blade carrier supports package for rotation [2015-04] |
Y10T 225/27 | . . | Movable blade continually biased toward wound web supply package [2015-04] |
Y10T 225/271 | . . . | Including temporary bias-disabling means [2015-04] |
Y10T 225/272 | . . . | Including stripper to separate lead-end from package [2015-04] |
Y10T 225/274 | . . . | Weight of bodily movable package contributes to blade-biasing force [2015-04] |
Y10T 225/275 | . . . | Blade slidably guided [2015-04] |
Y10T 225/276 | . . | Blade movable to severing position by moving work [2015-04] |
Y10T 225/277 | . . . | With simultaneous application of brake or clamp [2015-04] |
Y10T 225/278 | . . . . | Applied to running length work [2015-04] |
Y10T 225/279 | . . . . . | Opposed movable jaws [2015-04] |
Y10T 225/28 | . . | Wound package bodily biased toward fixed blade [2015-04] |
Y10T 225/282 | . . | With fixed blade and support for wound package [2015-04] |
Y10T 225/283 | . . . | Body- or belt-attached [2015-04] |
Y10T 225/284 | . . . | With brake applied to supply package [2015-04] |
Y10T 225/285 | . . . | With guide spaced from blade edge to provide lead-end therebetween [2015-04] |
Y10T 225/286 | . . | With work-abutment stop [2015-04] |
Y10T 225/287 | . . | With brake or clamp [2015-04] |
Y10T 225/289 | . . . | Thread cutter and clamp attachment for sewing machine presser foot [2015-04] |
Y10T 225/29 | . . . | Applied to running length work [2015-04] |
Y10T 225/291 | . . . . | Spaced from blade edge to provide lead-end therebetween [2015-04] |
Y10T 225/292 | . . . . . | Blade manually movable to expose lead-end [2015-04] |
Y10T 225/293 | . . . | Manually applied, spring returned [2015-04] |
Y10T 225/294 | . . | With guide for running length work [2015-04] |
Y10T 225/295 | . . | Blade manually movable to or from severing position [2015-04] |
Y10T 225/297 | . . | With means to facilitate lead-end grasping [2015-04] |
Y10T 225/298 | . . | Blades or severing devices [2015-04] |
Y10T 225/299 | . . . | Adjustable blade-edge contour [2015-04] |
Y10T 225/30 | . | Breaking or tearing apparatus [2015-04] |
Y10T 225/304 | . . | Including means to apply thermal shock to work [2015-04] |
Y10T 225/307 | . . | Combined with preliminary weakener or with nonbreaking cutter [2015-04] |
Y10T 225/314 | . . . | Successively actuated sharp and dull tools [2015-04] |
Y10T 225/321 | . . . | Preliminary weakener [2015-04] |
Y10T 225/325 | . . . . | With means to apply moment of force to weakened work [2015-04] |
Y10T 225/329 | . . | Plural breakers [2015-04] |
Y10T 225/336 | . . | Conveyor diverter for moving work [2016-05] |
Y10T 225/343 | . . . | Plural divergent work paths [2015-04] |
Y10T 225/35 | . . | Work-parting pullers [bursters] [2015-04] |
Y10T 225/357 | . . . | Relatively movable clamps [2015-04] |
Y10T 225/364 | . . | Axial twisters [2015-04] |
Y10T 225/371 | . . | Movable breaking tool [2015-04] |
Y10T 225/379 | . . . | Breaking tool intermediate spaced work supports [2015-04] |
Y10T 225/386 | . . . . | Clamping supports [2015-04] |
Y10T 225/393 | . . | Web restrainer [2015-04] |
Former US Class 279 Series [2015-01] |
Y10T 279/00 | Chucks or sockets [2015-01] |
Y10T 279/10 | . | Expanding [2015-01] |
Y10T 279/1004 | . . | Collet type [2015-01] |
Y10T 279/1008 | . . . | Fixed jaws and moving cam [2015-01] |
Y10T 279/1012 | . . . | Fixed cam and moving jaws [2015-01] |
Y10T 279/1016 | . . | Jaws mounted on flexible member; i.e., diaphragm [2015-01] |
Y10T 279/1021 | . . | Fluid-pressure actuator [2015-01] |
Y10T 279/1024 | . . . | Directly expanding jaws [2015-01] |
Y10T 279/1029 | . . . . | Jaw is expansible chamber; i.e., bladder type [2015-01] |
Y10T 279/1033 | . . . | Expanding jaws via mechanical connection [2015-01] |
Y10T 279/1037 | . . | Axially moving actuator [2015-01] |
Y10T 279/1041 | . . . | Wedge [2015-01] |
Y10T 279/1045 | . . . . | Internal cone [2015-01] |
Y10T 279/1049 | . . . . | with jaw positively interlocked with wedge; e.g., dovetail or T-slot [2015-01] |
Y10T 279/1054 | . . . . | with resilient means contacting nonresilient jaw [2015-01] |
Y10T 279/1058 | . . . . . | Constricting band, annulus, or clip [2015-01] |
Y10T 279/1062 | . . . | Toggle [2015-01] |
Y10T 279/1066 | . . . | Axially compressible element expands radially [2015-01] |
Y10T 279/1071 | . . . | Lever [2015-01] |
Y10T 279/1074 | . . | Rotary actuator [2015-01] |
Y10T 279/1079 | . . . | Clutch or self-actuating type [2015-01] |
Y10T 279/1083 | . . | Jaw structure [2015-01] |
Y10T 279/1087 | . . . | Resilient [2015-01] |
Y10T 279/1091 | . . . | Ball or roller [2015-01] |
Y10T 279/1095 | . . . | Pivoted [2015-01] |
Y10T 279/11 | . | Vacuum [2015-01] |
Y10T 279/12 | . | with fluid-pressure actuator [2015-01] |
Y10T 279/1208 | . . | with measuring, indicating or control means [2015-01] |
Y10T 279/1216 | . . | Jaw is expansible chamber; i.e., bladder type [2015-01] |
Y10T 279/1224 | . . | Pneumatic type [2015-01] |
Y10T 279/1233 | . . | Jaws mounted on flexible member; i.e., diaphragm [2015-01] |
Y10T 279/1241 | . . | Socket type [2015-01] |
Y10T 279/1249 | . . . | Collet [2015-01] |
Y10T 279/1258 | . . . . | Fixed cam and moving jaws [2015-01] |
Y10T 279/1266 | . . . . | Moving cam and fixed jaws [2015-01] |
Y10T 279/1274 | . . | Radially reciprocating jaws [2015-01] |
Y10T 279/1283 | . . . | Fluid pressure directly moves jaws [2015-01] |
Y10T 279/1291 | . . . | Fluid pressure moves jaws via mechanical connection [2015-01] |
Y10T 279/13 | . | Angularly adjustable or indexing [2015-01] |
Y10T 279/14 | . | Eccentric [2015-01] |
Y10T 279/15 | . | Threaded grip [2015-01] |
Y10T 279/16 | . | Longitudinal screw clamp [2015-01] |
Y10T 279/17 | . | Socket type [2015-01] |
Y10T 279/17008 | . . | Multiple alternative [2015-01] |
Y10T 279/17017 | . . | Self-centering of floating [2015-01] |
Y10T 279/17025 | . . . | Radially reciprocating jaws [2015-01] |
Y10T 279/17034 | . . . | Transverse holder and setscrew [2015-01] |
Y10T 279/17042 | . . | Lost motion [2015-01] |
Y10T 279/17051 | . . . | Swinging external yoke or detent [2015-01] |
Y10T 279/17059 | . . . . | Rotary socket [2015-01] |
Y10T 279/17068 | . . . | Rotary socket [2015-01] |
Y10T 279/17076 | . . . | Spreading elements [2015-01] |
Y10T 279/17085 | . . . | Key retainer [2015-01] |
Y10T 279/17094 | . . . | Sleeve type retainer [2015-01] |
Y10T 279/17102 | . . . . | Sleeve in socket [2015-01] |
Y10T 279/17111 | . . | Fluid-conduit drill holding [2015-01] |
Y10T 279/17119 | . . | Feed type [2015-01] |
Y10T 279/17128 | . . | Self-grasping [2015-01] |
Y10T 279/17136 | . . . | Yielding grasping jaws [2015-01] |
Y10T 279/17145 | . . . . | Ball or roller [2015-01] |
Y10T 279/17153 | . . . . | Spring jaws [2015-01] |
Y10T 279/17162 | . . . | Yielding detent [2015-01] |
Y10T 279/17171 | . . . | One-way-clutch type [2015-01] |
Y10T 279/17179 | . . . . | Wedge [2015-01] |
Y10T 279/17188 | . . . . | Side detent [2015-01] |
Y10T 279/17196 | . . . . . | Ball or roller [2015-01] |
Y10T 279/17205 | . . | Conical clamp threaded in socket [2015-01] |
Y10T 279/17213 | . . | Transversely oscillating jaws [2015-01] |
Y10T 279/17222 | . . . | Screw actuated [2015-01] |
Y10T 279/17231 | . . | Pivoted jaws [2015-01] |
Y10T 279/17239 | . . . | Moving-cam actuator [2015-01] |
Y10T 279/17247 | . . . . | Threaded cam sleeve [2015-01] |
Y10T 279/17256 | . . . . | Reciprocating cam sleeve [2015-01] |
Y10T 279/17264 | . . . | Fixed cam and moving jaws [2015-01] |
Y10T 279/17273 | . . . . | Axial screw actuator [2015-01] |
Y10T 279/17282 | . . . . | Threaded-sleeve actuator [2015-01] |
Y10T 279/17291 | . . | Resilient split socket [2015-01] |
Y10T 279/17299 | . . . | Threaded cam sleeve [2015-01] |
Y10T 279/17307 | . . . | Reciprocating cam sleeve [2015-01] |
Y10T 279/17316 | . . . | Unitary [2015-01] |
Y10T 279/17324 | . . . . | Split at one end only [2015-01] |
Y10T 279/17333 | . . . . . | Transverse screw actuator [2015-01] |
Y10T 279/17341 | . . . . . | Cam actuator [2015-01] |
Y10T 279/17351 | . . . . | Split end to end [2015-01] |
Y10T 279/17358 | . . . . | with jaw pads or insert [2015-01] |
Y10T 279/17367 | . . . | Nonresilient member biased by a resilient member [2015-01] |
Y10T 279/17376 | . . . | Resilient member reinforced by another resilient member [2015-01] |
Y10T 279/17384 | . . | with means to exclude contaminants; e.g., seal, shield [2015-01] |
Y10T 279/17393 | . . | One movable side [2015-01] |
Y10T 279/17401 | . . . | Sleeved [2015-01] |
Y10T 279/17411 | . . | Spring biased jaws [2015-01] |
Y10T 279/17418 | . . . | Unitary [2015-01] |
Y10T 279/17427 | . . . . | Split at one end only [2015-01] |
Y10T 279/17435 | . . . . | Split at both ends [2015-01] |
Y10T 279/17444 | . . . . | Split end to end [2015-01] |
Y10T 279/17452 | . . . . | with jaw pads or insert [2015-01] |
Y10T 279/17461 | . . . | Nonresilient member biased by a resilient member [2015-01] |
Y10T 279/17471 | . . . | Resilient member reinforced by another resilient member [2015-01] |
Y10T 279/17478 | . . . | with means to exclude contaminants; e.g., seal, shield [2015-01] |
Y10T 279/17487 | . . . | Moving-cam actuator [2015-01] |
Y10T 279/17495 | . . . . | Threaded sleeve and wedge [2015-01] |
Y10T 279/17504 | . . . . | Threaded cam sleeve [2015-01] |
Y10T 279/17512 | . . . . . | Loose jaws [2015-01] |
Y10T 279/17521 | . . . . | Reciprocating cam sleeve [2015-01] |
Y10T 279/17529 | . . . | Fixed cam and moving jaws [2015-01] |
Y10T 279/17538 | . . . . | Threaded-sleeve actuator [2015-01] |
Y10T 279/17547 | . . . . | Axial screw actuator [2015-01] |
Y10T 279/17555 | . . . | Loose jaws [2015-01] |
Y10T 279/17564 | . . | Loose jaws [2015-01] |
Y10T 279/17572 | . . . | Moving-cam actuator [2015-01] |
Y10T 279/17581 | . . . . | Threaded cam sleeve [2015-01] |
Y10T 279/17589 | . . . . | Reciprocating cam sleeve [2015-01] |
Y10T 279/17598 | . . . | Fixed cam and moving jaws [2015-01] |
Y10T 279/17606 | . . . . | Threaded sleeve and body [2015-01] |
Y10T 279/17615 | . . | Obliquely guided reciprocating jaws [2015-01] |
Y10T 279/17623 | . . . | Threaded sleeve and jaw [2015-01] |
Y10T 279/17632 | . . . . | Conical sleeve [2015-01] |
Y10T 279/17641 | . . . | Threaded central cone and jaw [2015-01] |
Y10T 279/17649 | . . . | Threaded sleeve and body [2015-01] |
Y10T 279/17658 | . . . | Reciprocating jaw advancing sleeve [2015-01] |
Y10T 279/17666 | . . | Radially reciprocating jaws [2015-01] |
Y10T 279/17675 | . . . | Transverse-screw actuated [2015-01] |
Y10T 279/17683 | . . . . | Interlaced jaws [2015-01] |
Y10T 279/17692 | . . . | Moving-cam actuator [2015-01] |
Y10T 279/17701 | . . . . | Threaded cam sleeve [2015-01] |
Y10T 279/17709 | . . . . | Threaded sleeve and wedge [2015-01] |
Y10T 279/17717 | . . . . | Rotary eccentric-cam sleeve [2015-01] |
Y10T 279/17726 | . . . . . | Roller and rocking jaw [2015-01] |
Y10T 279/17735 | . . . . . | Worm actuated [2015-01] |
Y10T 279/17743 | . . . . | Reciprocating cam sleeve [2015-01] |
Y10T 279/17752 | . . . . . | Ball or roller jaws [2015-01] |
Y10T 279/17761 | . . | Side detent [2015-01] |
Y10T 279/17769 | . . . | Pivoted or rotary [2015-01] |
Y10T 279/17777 | . . . . | Sleeved [2015-01] |
Y10T 279/17786 | . . . | Spring [2015-01] |
Y10T 279/17794 | . . . . | Sleeved [2015-01] |
Y10T 279/17803 | . . . | Rotary cam sleeve [2015-01] |
Y10T 279/17811 | . . . | Reciprocating sleeve [2015-01] |
Y10T 279/17821 | . . . | Set screw [2015-01] |
Y10T 279/17829 | . . . | U-clamp [2015-01] |
Y10T 279/17837 | . . . | Plural bolt [2015-01] |
Y10T 279/17846 | . . . | Single transverse bolt [2015-01] |
Y10T 279/17854 | . . . | Longitudinal clamping wedge [2015-01] |
Y10T 279/17863 | . . | Shouldered-tang holding [2015-01] |
Y10T 279/17871 | . . . | Cap [2015-01] |
Y10T 279/17881 | . . . . | Screw [2015-01] |
Y10T 279/17888 | . . | Tang offset within socket [2015-01] |
Y10T 279/17897 | . . | Tang offset without socket [2015-01] |
Y10T 279/17905 | . . | Bottomless [2015-01] |
Y10T 279/17914 | . . . | Friction grip [2015-01] |
Y10T 279/17923 | . . | Transverse pin [2015-01] |
Y10T 279/17931 | . . | Screw threaded [2015-01] |
Y10T 279/17941 | . . . | Nut lock [2015-01] |
Y10T 279/17948 | . . . . | Threaded sleeve [2015-01] |
Y10T 279/17957 | . . | Friction grip [2015-01] |
Y10T 279/17965 | . . . | Drill type [2015-01] |
Y10T 279/17974 | . . | Barbed or pronged tang [2015-01] |
Y10T 279/17982 | . . | Molded or cast-in tang [2015-01] |
Y10T 279/17991 | . . | Adjustable length or size [2015-01] |
Y10T 279/18 | . | Pivoted jaw [2015-01] |
Y10T 279/182 | . . | Cam-sleeve actuated [2015-01] |
Y10T 279/185 | . . | Internal-cone actuated [2015-01] |
Y10T 279/188 | . . | Toggle actuated [2015-01] |
Y10T 279/19 | . | Radially reciprocating jaws [2015-01] |
Y10T 279/1906 | . . | with indicator [2015-01] |
Y10T 279/1913 | . . | Transverse-screw actuated [2015-01] |
Y10T 279/1921 | . . . | Annular rack [2015-01] |
Y10T 279/1926 | . . | Spiral cam or scroll actuated [2015-01] |
Y10T 279/1933 | . . . | Worm [2015-01] |
Y10T 279/1941 | . . . | Bevel pinion [2015-01] |
Y10T 279/1946 | . . | Rack-and-pinion actuated [2015-01] |
Y10T 279/1953 | . . | Toggle actuated [2015-01] |
Y10T 279/1961 | . . | Lever actuated [2015-01] |
Y10T 279/1966 | . . . | Internal cone [2015-01] |
Y10T 279/1973 | . . | Wedge actuated [2015-01] |
Y10T 279/1981 | . . | External-cone actuated [2015-01] |
Y10T 279/1986 | . . | Jaws [2015-01] |
Y10T 279/1993 | . . . | with means to facilitate jaw removal [2015-01] |
Y10T 279/20 | . | with safety feature [2015-01] |
Y10T 279/21 | . | with measuring, indicating or control means [2015-01] |
Y10T 279/22 | . | Double acting [2015-01] |
Y10T 279/23 | . | with magnetic or electrostatic means [2015-01] |
Y10T 279/24 | . | by centrifugal force [2015-01] |
Y10T 279/243 | . . | to counterbalance jaws [2015-01] |
Y10T 279/247 | . . | to grip tool or workpiece [2015-01] |
Y10T 279/25 | . | Compensation for eccentricity [2015-01] |
Y10T 279/26 | . | with centering means [2015-01] |
Y10T 279/27 | . | Separate chuck-actuating power source [2015-01] |
Y10T 279/275 | . . | Self-contained [2015-01] |
Y10T 279/28 | . | for gear or spline molding [2015-01] |
Y10T 279/29 | . | More than one set of gripping means [2015-01] |
Y10T 279/30 | . | Torsion mandrel [2015-01] |
Y10T 279/31 | . | Jaws mounted on flexible member; i.e. , diaphragm [2015-01] |
Y10T 279/32 | . | Means to prevent jaw loosening [2015-01] |
Y10T 279/33 | . | Member applies axial force component [2015-01] |
Y10T 279/34 | . | Accessory or component [2015-01] |
Y10T 279/3406 | . . | Adapter [2015-01] |
Y10T 279/3412 | . . . | Drive conversion [2015-01] |
Y10T 279/3418 | . . . | for particular tool or workpiece [2015-01] |
Y10T 279/3425 | . . | Sliding cam chuck actuator [2015-01] |
Y10T 279/3431 | . . | Chuck key [2015-01] |
Y10T 279/3437 | . . . | Safety feature; e.g., ejector, interlock [2015-01] |
Y10T 279/3443 | . . . | Key holding or attaching means [2015-01] |
Y10T 279/3451 | . . . | Nonseparable or built-in [2015-01] |
Y10T 279/3456 | . . | Padded or cushioned jaw [2015-01] |
Y10T 279/3462 | . . | Jaw insert [2015-01] |
Y10T 279/3468 | . . . | Machinable jaw [2015-01] |
Y10T 279/3475 | . . . . | Locking or positioning means [2015-01] |
Y10T 279/3481 | . . | Tool or workpiece ejector [2015-01] |
Y10T 279/3487 | . . | Tool or work stop or locator [2015-01] |
Y10T 279/3493 | . . | Protection means; e.g., cover, seal, overstress prevention, air blast [2015-01] |
Y10T 279/35 | . | Miscellaneous [2015-01] |
Former US Class 292 series [2015-04] |
Y10T 292/00 | Closure fasteners [2015-04] |
Y10T 292/03 | . | Miscellaneous [2015-04] |
Y10T 292/06 | . | Adjustable backset [2015-04] |
Y10T 292/08 | . | Bolts [2015-04] |
Y10T 292/0801 | . . | Multiple [2015-04] |
Y10T 292/0802 | . . . | Sliding and rotary [2015-04] |
Y10T 292/0803 | . . . | Sliding and swinging [2015-04] |
Y10T 292/0805 | . . . . | Combined motion [2015-04] |
Y10T 292/0806 | . . . . . | Lever-operating means [2015-04] |
Y10T 292/0807 | . . . | Sliding and hooked end [2015-04] |
Y10T 292/0808 | . . . | Sliding and roller [2015-04] |
Y10T 292/0809 | . . . | Sliding and spring arm [2015-04] |
Y10T 292/081 | . . . | Swinging and hooked end [2015-04] |
Y10T 292/0811 | . . . | Swinging and roller [2015-04] |
Y10T 292/0813 | . . . | Swinging and spring arm [2015-04] |
Y10T 292/0814 | . . . | Double acting [2015-04] |
Y10T 292/0815 | . . . . | Roller [2015-04] |
Y10T 292/0816 | . . . . | Sliding [2015-04] |
Y10T 292/0817 | . . . . | Spring arm [2015-04] |
Y10T 292/0818 | . . . . | Swinging [2015-04] |
Y10T 292/082 | . . . | Spring arm [2015-04] |
Y10T 292/0821 | . . . . | Combined motion [2015-04] |
Y10T 292/0822 | . . . | Emergency operating means [2015-04] |
Y10T 292/0823 | . . . | Gear [2015-04] |
Y10T 292/0824 | . . . | Roller [2015-04] |
Y10T 292/0825 | . . . | Hooked end [2015-04] |
Y10T 292/0826 | . . . . | Operating means [2015-04] |
Y10T 292/0828 | . . . . . | Link and lever [2015-04] |
Y10T 292/0829 | . . . . . | Cam [2015-04] |
Y10T 292/083 | . . . . . | Flexible [2015-04] |
Y10T 292/0831 | . . . . . | Lever [2015-04] |
Y10T 292/0832 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/0833 | . . . . . | Rigid [2015-04] |
Y10T 292/0834 | . . . | Sliding [2015-04] |
Y10T 292/0836 | . . . . | Operating means [2015-04] |
Y10T 292/0837 | . . . . . | Cam and lever [2015-04] |
Y10T 292/0838 | . . . . . | Lever and push or pull rod [2015-04] |
Y10T 292/0839 | . . . . . | Link and lever [2015-04] |
Y10T 292/084 | . . . . . | Cam [2015-04] |
Y10T 292/0841 | . . . . . | Flexible [2015-04] |
Y10T 292/0843 | . . . . . | Gear [2015-04] |
Y10T 292/0844 | . . . . . | Lever [2015-04] |
Y10T 292/0845 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/0846 | . . . . . | Rigid [2015-04] |
Y10T 292/0847 | . . . . . | Screw [2015-04] |
Y10T 292/0848 | . . . | Swinging [2015-04] |
Y10T 292/0849 | . . . . | Operating means [2015-04] |
Y10T 292/0851 | . . . . . | Cam and lever [2015-04] |
Y10T 292/0852 | . . . . . | Link and cam [2015-04] |
Y10T 292/0853 | . . . . . | Link and lever [2015-04] |
Y10T 292/0854 | . . . . . | Cam [2015-04] |
Y10T 292/0855 | . . . . . | Flexible [2015-04] |
Y10T 292/0856 | . . . . . | Gear [2015-04] |
Y10T 292/0857 | . . . . . | Lever [2015-04] |
Y10T 292/0859 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/086 | . . . . . | Rigid [2015-04] |
Y10T 292/0861 | . . . . . | Screw [2015-04] |
Y10T 292/0862 | . . | Swinging and hooked end, multiple head [2015-04] |
Y10T 292/0863 | . . | Sliding and rotary [2015-04] |
Y10T 292/0864 | . . . | Combined motion [2015-04] |
Y10T 292/0866 | . . . | Multiple head [2015-04] |
Y10T 292/0867 | . . . | Spring projected [2015-04] |
Y10T 292/0868 | . . . . | Combined motion [2015-04] |
Y10T 292/0869 | . . . | Spring retracted [2015-04] |
Y10T 292/087 | . . | Loops [2015-04] |
Y10T 292/0871 | . . . | Sliding and swinging, lever-operating means [2015-04] |
Y10T 292/0872 | . . . | Sliding catch [2015-04] |
Y10T 292/0874 | . . . | Spring-arm catch [2015-04] |
Y10T 292/0875 | . . . | Swinging catch [2015-04] |
Y10T 292/0876 | . . | Double acting [2015-04] |
Y10T 292/0877 | . . . | Sliding and swinging [2015-04] |
Y10T 292/0878 | . . . | Sliding [2015-04] |
Y10T 292/0879 | . . . . | Roller [2015-04] |
Y10T 292/088 | . . . | Spring arm [2015-04] |
Y10T 292/0882 | . . . . | Roller [2015-04] |
Y10T 292/0883 | . . . | Swinging [2015-04] |
Y10T 292/0884 | . . . . | Roller [2015-04] |
Y10T 292/0885 | . . . | Roller [2015-04] |
Y10T 292/0886 | . . | Sliding and swinging [2015-04] |
Y10T 292/0887 | . . . | Operating means [2015-04] |
Y10T 292/0889 | . . . . | Cam [2015-04] |
Y10T 292/089 | . . . . | Lever [2015-04] |
Y10T 292/0891 | . . . . | Rigid [2015-04] |
Y10T 292/0892 | . . . | Multiple head [2015-04] |
Y10T 292/0893 | . . . | Spring retracted [2015-04] |
Y10T 292/0894 | . . | Spring arm [2015-04] |
Y10T 292/0895 | . . . | Operating means [2015-04] |
Y10T 292/0897 | . . . . | Link and lever [2015-04] |
Y10T 292/0898 | . . . . | Cam [2015-04] |
Y10T 292/0899 | . . . . | Flexible [2015-04] |
Y10T 292/09 | . . . . | Lever [2015-04] |
Y10T 292/0901 | . . . . | Push or pull rod [2015-04] |
Y10T 292/0902 | . . . . | Rigid [2015-04] |
Y10T 292/0903 | . . . . . | Seal catch [2015-04] |
Y10T 292/0905 | . . . . . | Swinging catch [2015-04] |
Y10T 292/0906 | . . . . | Screw [2015-04] |
Y10T 292/0907 | . . . | Multiple head [2015-04] |
Y10T 292/0908 | . . | Emergency operating means [2015-04] |
Y10T 292/0909 | . . . | Panel [2015-04] |
Y10T 292/091 | . . . | Platform [2015-04] |
Y10T 292/0911 | . . | Hooked end [2015-04] |
Y10T 292/0913 | . . . | Sliding and swinging [2015-04] |
Y10T 292/0914 | . . . . | Operating means [2015-04] |
Y10T 292/0915 | . . . . . | Cam [2015-04] |
Y10T 292/0916 | . . . . . | Gear [2015-04] |
Y10T 292/0917 | . . . . . | Lever [2015-04] |
Y10T 292/0918 | . . . . . | Rigid [2015-04] |
Y10T 292/092 | . . . . . | Screw [2015-04] |
Y10T 292/0921 | . . . | Multiple head [2015-04] |
Y10T 292/0922 | . . . . | Operating means [2015-04] |
Y10T 292/0923 | . . . . . | Lever [2015-04] |
Y10T 292/0924 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/0925 | . . . . . | Rigid [2015-04] |
Y10T 292/0926 | . . . | Spring projected [2015-04] |
Y10T 292/0928 | . . . . | Operating means [2015-04] |
Y10T 292/0929 | . . . . . | Link and lever [2015-04] |
Y10T 292/093 | . . . . . | Cam [2015-04] |
Y10T 292/0931 | . . . . . | Flexible [2015-04] |
Y10T 292/0932 | . . . . . | Lever [2015-04] |
Y10T 292/0933 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/0934 | . . . . . | Rigid [2015-04] |
Y10T 292/0936 | . . . | Spring retracted [2015-04] |
Y10T 292/0937 | . . . | Gravity actuated [2015-04] |
Y10T 292/0938 | . . . . | Operating means [2015-04] |
Y10T 292/0939 | . . . . . | Cam [2015-04] |
Y10T 292/094 | . . . . . | Flexible [2015-04] |
Y10T 292/0941 | . . . . . | Lever [2015-04] |
Y10T 292/0943 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/0944 | . . . . . | Rigid [2015-04] |
Y10T 292/0945 | . . . | Operating means [2015-04] |
Y10T 292/0946 | . . . . | Link and lever [2015-04] |
Y10T 292/0947 | . . . . | Cam [2015-04] |
Y10T 292/0948 | . . . . | Closure [2015-04] |
Y10T 292/0949 | . . . . | Lever [2015-04] |
Y10T 292/0951 | . . . . | Rigid [2015-04] |
Y10T 292/0952 | . . . . . | Closure catch [2015-04] |
Y10T 292/0953 | . . . . . | Friction catch [2015-04] |
Y10T 292/0954 | . . . . . | Padlock or seal catch [2015-04] |
Y10T 292/0955 | . . . . . | Screw catch [2015-04] |
Y10T 292/0956 | . . . . . | Sliding catch [2015-04] |
Y10T 292/0957 | . . . . . | Spring-arm catch [2015-04] |
Y10T 292/0959 | . . . . . | Swinging catch [2015-04] |
Y10T 292/096 | . . | Sliding [2015-04] |
Y10T 292/0961 | . . . | Multiple head [2015-04] |
Y10T 292/0962 | . . . . | Operating means [2015-04] |
Y10T 292/0963 | . . . . . | Link and lever [2015-04] |
Y10T 292/0964 | . . . . . | Cam [2015-04] |
Y10T 292/0966 | . . . . . | Gear [2015-04] |
Y10T 292/0967 | . . . . . | Lever [2015-04] |
Y10T 292/0968 | . . . . . | Rigid [2015-04] |
Y10T 292/0969 | . . . | Spring projected [2015-04] |
Y10T 292/097 | . . . . | Operating means [2015-04] |
Y10T 292/0971 | . . . . . | Cam and lever [2015-04] |
Y10T 292/0972 | . . . . . | Lever and push or pull rod [2015-04] |
Y10T 292/0974 | . . . . . | Link and lever [2015-04] |
Y10T 292/0975 | . . . . . | Link and push or pull rod [2015-04] |
Y10T 292/0976 | . . . . . | Sliding cam [2015-04] |
Y10T 292/0977 | . . . . . | Cam [2015-04] |
Y10T 292/0978 | . . . . . . | Specifically related to vehicle closure [2015-04] |
Y10T 292/0979 | . . . . . . . | Bolt disabled by contraretractive movement of inside handle [2015-04] |
Y10T 292/098 | . . . . . . | Auxiliary bolt [2015-04] |
Y10T 292/0982 | . . . . . . | Bolt blocking or disabling means [2015-04] |
Y10T 292/0983 | . . . . . . . | Involves rollback [2015-04] |
Y10T 292/0984 | . . . . . . . . | Rollback members located on separate spindles [2015-04] |
Y10T 292/0985 | . . . . . . . | Discrete pivotable or rotatable actuator [2015-04] |
Y10T 292/0986 | . . . . . . . | Discrete push or pull actuator [2015-04] |
Y10T 292/0987 | . . . . . . | Bolt has ancillary projection spring [2015-04] |
Y10T 292/0989 | . . . . . . | Plural rollback elements directionally selectively effective [2015-04] |
Y10T 292/099 | . . . . . . . | On separate spindles [2015-04] |
Y10T 292/0991 | . . . . . . . | On a tubular member [2015-04] |
Y10T 292/0992 | . . . . . | Flexible [2015-04] |
Y10T 292/0993 | . . . . . | Gear [2015-04] |
Y10T 292/0994 | . . . . . | Lever [2015-04] |
Y10T 292/0995 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/0997 | . . . . . | Rigid [2015-04] |
Y10T 292/0998 | . . . . . | Screw [2015-04] |
Y10T 292/0999 | . . . | Spring retracted [2015-04] |
Y10T 292/10 | . . . . | Friction catch [2015-04] |
Y10T 292/1001 | . . . . | Sliding catch [2015-04] |
Y10T 292/1002 | . . . . | Spring-arm catch [2015-04] |
Y10T 292/1003 | . . . . | Swinging catch [2015-04] |
Y10T 292/1005 | . . . . | Cam-operating means [2015-04] |
Y10T 292/1006 | . . . | Gravity actuated [2015-04] |
Y10T 292/1007 | . . . . | Operating means [2015-04] |
Y10T 292/1008 | . . . . . | Cam and lever [2015-04] |
Y10T 292/1009 | . . . . . | Link and lever [2015-04] |
Y10T 292/101 | . . . . . | Cam [2015-04] |
Y10T 292/1011 | . . . . . | Lever [2015-04] |
Y10T 292/1013 | . . . . . | Rigid [2015-04] |
Y10T 292/1014 | . . . | Operating means [2015-04] |
Y10T 292/1015 | . . . . | Link and lever [2015-04] |
Y10T 292/1016 | . . . . | Cam [2015-04] |
Y10T 292/1017 | . . . . | Flexible [2015-04] |
Y10T 292/1018 | . . . . | Gear [2015-04] |
Y10T 292/102 | . . . . | Lever [2015-04] |
Y10T 292/1021 | . . . . | Motor [2015-04] |
Y10T 292/1022 | . . . . | Rigid [2015-04] |
Y10T 292/1023 | . . . . . | Closure catch [2015-04] |
Y10T 292/1024 | . . . . . | Friction catch [2015-04] |
Y10T 292/1025 | . . . . . | Padlock or seal catch [2015-04] |
Y10T 292/1026 | . . . . . | Screw catch [2015-04] |
Y10T 292/1028 | . . . . . | Sliding catch [2015-04] |
Y10T 292/1029 | . . . . . . | Seal [2015-04] |
Y10T 292/103 | . . . . . | Spring-arm catch [2015-04] |
Y10T 292/1031 | . . . . . | Swinging catch [2015-04] |
Y10T 292/1032 | . . . . . . | Seal [2015-04] |
Y10T 292/1033 | . . . . | Screw [2015-04] |
Y10T 292/1034 | . . . | Curved [2015-04] |
Y10T 292/1036 | . . . | End lever [2015-04] |
Y10T 292/1037 | . . . | Pivoted end [2015-04] |
Y10T 292/1038 | . . . | Roller [2015-04] |
Y10T 292/1039 | . . | Swinging and camming [2015-04] |
Y10T 292/10395 | . . . | Spring projected [2015-04] |
Y10T 292/104 | . . . . | Rigid operating means [2015-04] |
Y10T 292/1041 | . . . | Rigid operating means [2015-04] |
Y10T 292/1043 | . . | Swinging [2015-04] |
Y10T 292/1044 | . . . | Multiple head [2015-04] |
Y10T 292/1045 | . . . . | Operating means [2015-04] |
Y10T 292/1046 | . . . . . | Cam [2015-04] |
Y10T 292/1047 | . . . . . | Closure [2015-04] |
Y10T 292/1048 | . . . . . | Lever [2015-04] |
Y10T 292/1049 | . . . . . | Rigid [2015-04] |
Y10T 292/1051 | . . . | Spring projected [2015-04] |
Y10T 292/1052 | . . . . | Operating means [2015-04] |
Y10T 292/1053 | . . . . . | Lever and push or pull rod [2015-04] |
Y10T 292/1054 | . . . . . | Link and cam [2015-04] |
Y10T 292/1055 | . . . . . | Link and lever [2015-04] |
Y10T 292/1056 | . . . . . | Cam [2015-04] |
Y10T 292/1057 | . . . . . | Flexible [2015-04] |
Y10T 292/1059 | . . . . . | Lever [2015-04] |
Y10T 292/106 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/1061 | . . . . . | Rigid [2015-04] |
Y10T 292/1062 | . . . | Spring retracted [2015-04] |
Y10T 292/1063 | . . . | Gravity actuated [2015-04] |
Y10T 292/1064 | . . . . | Operating means [2015-04] |
Y10T 292/1066 | . . . . . | Cam and lever [2015-04] |
Y10T 292/1067 | . . . . . | Link and lever [2015-04] |
Y10T 292/1068 | . . . . . | Cam [2015-04] |
Y10T 292/1069 | . . . . . | Flexible [2015-04] |
Y10T 292/107 | . . . . . | Lever [2015-04] |
Y10T 292/1071 | . . . . . | Push or pull rod [2015-04] |
Y10T 292/1072 | . . . . . | Rigid [2015-04] |
Y10T 292/1074 | . . . . | Roller [2015-04] |
Y10T 292/1075 | . . . | Operating means [2015-04] |
Y10T 292/1076 | . . . . | Link and lever [2015-04] |
Y10T 292/1077 | . . . . | Cam [2015-04] |
Y10T 292/1078 | . . . . | Closure [2015-04] |
Y10T 292/1079 | . . . . | Gear [2015-04] |
Y10T 292/108 | . . . . | Lever [2015-04] |
Y10T 292/1082 | . . . . | Motor [2015-04] |
Y10T 292/1083 | . . . . | Rigid [2015-04] |
Y10T 292/1084 | . . . . . | Closure catch [2015-04] |
Y10T 292/1085 | . . . . . | Friction catch [2015-04] |
Y10T 292/1086 | . . . . . | Padlock or seal catch [2015-04] |
Y10T 292/1087 | . . . . . | Screw catch [2015-04] |
Y10T 292/1089 | . . . . . | Sliding catch [2015-04] |
Y10T 292/109 | . . . . . . | Seal [2015-04] |
Y10T 292/1091 | . . . . . | Spring-arm catch [2015-04] |
Y10T 292/1092 | . . . . . | Swinging catch [2015-04] |
Y10T 292/1093 | . . . . . . | Seal [2015-04] |
Y10T 292/1094 | . . . . | Screw [2015-04] |
Y10T 292/1095 | . . | Seal-rupturing devices [2015-04] |
Y10T 292/1097 | . . | Reversible [2015-04] |
Y10T 292/1098 | . . . | Cam and lever operating means [2015-04] |
Y10T 292/1099 | . . | Screw [2015-04] |
Y10T 292/11 | . | Magnetic [2015-04] |
Y10T 292/14 | . | Ball [2015-04] |
Y10T 292/17 | . | Bendable securers [2015-04] |
Y10T 292/175 | . | Bolt releasers [2015-04] |
Y10T 292/18 | . . | Free-end-engaging means [2015-04] |
Y10T 292/19 | . . | Foot operated [2015-04] |
Y10T 292/20 | . | Clamps [2015-04] |
Y10T 292/202 | . . | Hatch fastener [2015-04] |
Y10T 292/205 | . . | Ring [2015-04] |
Y10T 292/207 | . . . | Permanently deformed [2015-04] |
Y10T 292/209 | . . . | Resilient wedge [2015-04] |
Y10T 292/212 | . . . | With expanding or contracting means [2015-04] |
Y10T 292/214 | . . . . | Screw [2015-04] |
Y10T 292/216 | . . . . | Toggle lever [2015-04] |
Y10T 292/218 | . . | Screw against closure [2015-04] |
Y10T 292/221 | . . | Screw and nut [2015-04] |
Y10T 292/223 | . . . | Swingable [2015-04] |
Y10T 292/225 | . . | Cam-operating means [2015-04] |
Y10T 292/228 | . . | Portable [2015-04] |
Y10T 292/23 | . | Cross bars [2015-04] |
Y10T 292/237 | . . | Screw-operating means [2015-04] |
Y10T 292/243 | . . | Vehicle door latches [2015-04] |
Y10T 292/25 | . | Cylinder [2015-04] |
Y10T 292/28 | . | Extension link [2015-04] |
Y10T 292/282 | . . | Multiple [2015-04] |
Y10T 292/283 | . . | Chain [2015-04] |
Y10T 292/285 | . . | Notched bar [2015-04] |
Y10T 292/286 | . . . | Sliding catch [2015-04] |
Y10T 292/288 | . . . | Swinging catch [2015-04] |
Y10T 292/289 | . . | Slotted bar [2015-04] |
Y10T 292/291 | . . . | Sliding catch [2015-04] |
Y10T 292/293 | . . . | Swinging catch [2015-04] |
Y10T 292/2935 | . . | Slotted or notched keeper [2015-04] |
Y10T 292/294 | . . . | Sliding catch [2015-04] |
Y10T 292/296 | . . . | Swinging catch [2015-04] |
Y10T 292/297 | . . | Notched keeper [2015-04] |
Y10T 292/299 | . . | Slotted keeper [2015-04] |
Y10T 292/301 | . . | Friction catch [2015-04] |
Y10T 292/302 | . . | Screw catch [2015-04] |
Y10T 292/304 | . . | Sliding catch [2015-04] |
Y10T 292/305 | . . | Swinging catch [2015-04] |
Y10T 292/306 | . | Gear [2015-04] |
Y10T 292/307 | . . | Sliding catch [2015-04] |
Y10T 292/308 | . . | Swinging catch [2015-04] |
Y10T 292/31 | . | Hasps [2015-04] |
Y10T 292/314 | . . | Sliding catch [2015-04] |
Y10T 292/319 | . . . | Seal [2015-04] |
Y10T 292/323 | . . | Swinging catch [2015-04] |
Y10T 292/327 | . . . | Seal [2015-04] |
Y10T 292/331 | . . | Seal catch [2015-04] |
Y10T 292/336 | . . | Seal-rupturing devices [2015-04] |
Y10T 292/34 | . | Portable [2015-04] |
Y10T 292/37 | . | Portable securer plate or bar [2015-04] |
Y10T 292/373 | . . | Sliding and swinging holding member [2015-04] |
Y10T 292/376 | . . | Screw-holding member [2015-04] |
Y10T 292/379 | . . | Sliding holding member [2015-04] |
Y10T 292/382 | . . . | Screw-operating means [2015-04] |
Y10T 292/385 | . . . | Screw catch [2015-04] |
Y10T 292/388 | . . . | Sliding catch [2015-04] |
Y10T 292/391 | . . . | Swinging catch [2015-04] |
Y10T 292/394 | . . | Swinging holding member [2015-04] |
Y10T 292/397 | . . . | Catch devices [2015-04] |
Y10T 292/40 | . | Rings [2015-04] |
Y10T 292/42 | . | Rigid engaging means [2015-04] |
Y10T 292/426 | . . | Screw catch [2015-04] |
Y10T 292/432 | . . | Sliding catch [2015-04] |
Y10T 292/438 | . . | Spring-arm catch [2015-04] |
Y10T 292/444 | . . | Swinging catch [2015-04] |
Y10T 292/45 | . | Rod clamps [2015-04] |
Y10T 292/47 | . . | Friction-plate catch [2015-04] |
Y10T 292/48 | . | Seals [2015-04] |
Y10T 292/481 | . . | Compressible disk [2015-04] |
Y10T 292/483 | . . . | Reinforced [2015-04] |
Y10T 292/484 | . . . | Multiple [2015-04] |
Y10T 292/485 | . . . . | Sheet metal [2015-04] |
Y10T 292/487 | . . . . | Hard and soft metal [2015-04] |
Y10T 292/488 | . . . | Sheet metal [2015-04] |
Y10T 292/49 | . . | Compressible rivets and eyelets [2015-04] |
Y10T 292/491 | . . | Distorted shackle [2015-04] |
Y10T 292/492 | . . | Driving [2015-04] |
Y10T 292/494 | . . | Interengaging shackle ends, inclosing housing [2015-04] |
Y10T 292/4945 | . . | Rigid shackle ends [2015-04] |
Y10T 292/495 | . . . | Resilient and rigid engaging means [2015-04] |
Y10T 292/496 | . . . | Resilient engaging means [2015-04] |
Y10T 292/497 | . . | Resilient shackle ends [2015-04] |
Y10T 292/498 | . . . | Rigid engaging means [2015-04] |
Y10T 292/499 | . . . | Resilient engaging means [2015-04] |
Y10T 292/50 | . . | Single piece, spring catch [2015-04] |
Y10T 292/502 | . . | Shiftable catch shackle operated [2015-04] |
Y10T 292/503 | . . | Split-ring catch, shackle operated [2015-04] |
Y10T 292/505 | . . | Strap-end fasteners [2015-04] |
Y10T 292/506 | . . | Rigid disk, distorted shackle [2015-04] |
Y10T 292/507 | . . | Tag type [2015-04] |
Y10T 292/509 | . . | Encasing [2015-04] |
Y10T 292/51 | . | Seal bolts [2015-04] |
Y10T 292/513 | . | Shackles [2015-04] |
Y10T 292/516 | . . | Sliding catch, seal [2015-04] |
Y10T 292/522 | . . | Swinging catch, seal [2015-04] |
Y10T 292/528 | . . | Seal catch [2015-04] |
Y10T 292/534 | . . | Seal-rupturing devices [2015-04] |
Y10T 292/54 | . | Trippers [2015-04] |
Y10T 292/546 | . . | Sliding detent [2015-04] |
Y10T 292/552 | . . | Spring-arm detent [2015-04] |
Y10T 292/558 | . . | Sliding bolt, swinging detent [2015-04] |
Y10T 292/564 | . . | Swinging bolt, swinging detent [2015-04] |
Y10T 292/57 | . | Operators with knobs or handles [2015-04] |
Y10T 292/59 | . | Rollback and spindle connection [2015-04] |
Y10T 292/62 | . | Bolt casings [2015-04] |
Y10T 292/65 | . | Braces [2015-04] |
Y10T 292/67 | . . | Portable [2015-04] |
Y10T 292/68 | . | Keepers [2015-04] |
Y10T 292/683 | . . | Segment [2015-04] |
Y10T 292/685 | . . | With anti-friction means [2015-04] |
Y10T 292/688 | . . | With silencing or anti-rattle means [2015-04] |
Y10T 292/691 | . . . | Take-up [2015-04] |
Y10T 292/694 | . . | Covers [2015-04] |
Y10T 292/696 | . . | With movable dog, catch or striker [2015-04] |
Y10T 292/699 | . . . | Motor controlled [2015-04] |
Y10T 292/702 | . . . | Pivoted or swinging [2015-04] |
Y10T 292/705 | . . | Adjustable [2015-04] |
Y10T 292/707 | . . . | Vertically [2015-04] |
Y10T 292/71 | . | Wedges [2015-04] |
Y10T 292/73 | . . | Portable [2015-04] |
Y10T 292/74 | . | Weights [2015-04] |
Y10T 292/76 | . | Blind-slat holders [2015-04] |
Y10T 292/79 | . | Bolt guards [2015-04] |
Y10T 292/82 | . | Knobs [2015-04] |
Y10T 292/85 | . | Knob-attaching devices [2015-04] |
Y10T 292/854 | . . | Friction [2015-04] |
Y10T 292/858 | . . | Screw [2015-04] |
Y10T 292/861 | . . . | Guards [2015-04] |
Y10T 292/865 | . . | Sliding [2015-04] |
Y10T 292/869 | . . | Spring arm [2015-04] |
Y10T 292/873 | . . | Swinging [2015-04] |
Y10T 292/876 | . . | Wedge [2015-04] |
Y10T 292/88 | . | Knob bearings [2015-04] |
Y10T 292/91 | . | Knob rose plates [2015-04] |
Y10T 292/93 | . | Latch spindles [2015-04] |
Y10T 292/96 | . | Latch-spindle catches [2015-04] |
Former US Class 403 Series [2015-01] |
Y10T 403/00 | Joints and connections [2015-01] |
Y10T 403/10 | . | Selectively engageable hub to shaft connection [2015-01] |
Y10T 403/16 | . | with adjunctive protector, broken parts retainer, repair, assembly or disassembly feature [2015-01] |
Y10T 403/1608 | . . | Holding means or protector functioning only during transportation, assembly or disassembly [2015-01] |
Y10T 403/1616 | . . | Position or guide means [2015-01] |
Y10T 403/1624 | . . . | Related to joint component [2015-01] |
Y10T 403/1633 | . . | Utilizing fluid pressure [2015-01] |
Y10T 403/20 | . | with indicator or inspection means [2015-01] |
Y10T 403/21 | . | Utilizing thermal characteristic, e.g. , expansion or contraction, etc. [2015-01] |
Y10T 403/213 | . . | Interposed material of intermediate coefficient of expansion [2015-01] |
Y10T 403/217 | . . | Members having different coefficients of expansion [2015-01] |
Y10T 403/22 | . | with fluid pressure responsive component [2015-01] |
Y10T 403/29 | . | Rotarily connected, differentially translatable members, e.g. , turn-buckle, etc. [2015-01] |
Y10T 403/291 | . . | having tool-engaging means or operating handle [2015-01] |
Y10T 403/293 | . . | having operating mechanism [2015-01] |
Y10T 403/295 | . . | having locking means [2015-01] |
Y10T 403/297 | . . | Differential pitch, similar hand [2015-01] |
Y10T 403/299 | . . | Externally threaded actuator [2015-01] |
Y10T 403/30 | . | Laterally related members connected by latch means, e.g. , scaffold connectors [2015-01] |
Y10T 403/32 | . | Articulated members [2015-01] |
Y10T 403/32008 | . . | Plural distinct articulation axes [2015-01] |
Y10T 403/32016 | . . . | Three or more parallel axes [2015-01] |
Y10T 403/32024 | . . . | Single adjustment for plural axes [2015-01] |
Y10T 403/32032 | . . . | Plural ball and socket [2015-01] |
Y10T 403/32041 | . . . | Universal [2015-01] |
Y10T 403/32049 | . . . . | Non-coplanar axes [2015-01] |
Y10T 403/32057 | . . . | Angular and linear [2015-01] |
Y10T 403/32065 | . . . . | Screw and swivel [2015-01] |
Y10T 403/32073 | . . . . | Pivot stud slidable in elongated opening [2015-01] |
Y10T 403/32081 | . . . | Parallel rotary [2015-01] |
Y10T 403/32091 | . . . | Plural translating connections [2015-01] |
Y10T 403/32114 | . . | including static joint [2015-01] |
Y10T 403/32122 | . . . | Trunnion assembly to side of rod [2015-01] |
Y10T 403/32131 | . . . | One member is plate or side [2015-01] |
Y10T 403/32139 | . . . . | Secant, i.e., rod extending through plate [2015-01] |
Y10T 403/32147 | . . . . | Plate or side forms bearing surface [2015-01] |
Y10T 403/32155 | . . . . | Bearing component clamped to plate or side, e.g., bolted, etc. [2015-01] |
Y10T 403/32163 | . . . | Articulate joint intermediate end joints [2015-01] |
Y10T 403/32172 | . . . . | Variable angle [2015-01] |
Y10T 403/32181 | . . . . . | Universal [2015-01] |
Y10T 403/32188 | . . . | Angled or offset members [2015-01] |
Y10T 403/32196 | . . . | Articulate joint is ball and socket [2015-01] |
Y10T 403/32204 | . . . . | with threaded joint [2015-01] |
Y10T 403/32213 | . . . | Articulate joint is a swivel [2015-01] |
Y10T 403/32221 | . . . | Articulate joint comprises pivoted clevis or channel bar [2015-01] |
Y10T 403/32229 | . . . | Articulate joint is a slide [2015-01] |
Y10T 403/32254 | . . | Lockable at fixed position [2015-01] |
Y10T 403/32262 | . . . | At selected angle [2015-01] |
Y10T 403/32271 | . . . . | Movable brace between members [2015-01] |
Y10T 403/32278 | . . . . | Members rotatable about oblique axes [2015-01] |
Y10T 403/32286 | . . . . | Clamping screw traverses sliding complementary arcuate bearing surfaces [2015-01] |
Y10T 403/32295 | . . . . | Securing yoke or ring spaced radially from locking means [2015-01] |
Y10T 403/32303 | . . . . . | Eyebolt [2015-01] |
Y10T 403/32311 | . . . . | Ball and socket [2015-01] |
Y10T 403/32319 | . . . . | including pivot stud [2015-01] |
Y10T 403/32327 | . . . . . | including radially spaced detent or latch component [2015-01] |
Y10T 403/32336 | . . . . . . | Engaging notch or recess in outer periphery of component [2015-01] |
Y10T 403/32344 | . . . . . . | Side of rod engages recess in radial face [2015-01] |
Y10T 403/32352 | . . . . . . | Pivoted detent [2015-01] |
Y10T 403/32361 | . . . . . . | Engaging recess in radial face [2015-01] |
Y10T 403/32368 | . . . . . | including radial interengaging tongue and slot or serrations [2015-01] |
Y10T 403/32377 | . . . . . | Radially spaced arcuate slot engages fastener [2015-01] |
Y10T 403/32385 | . . . . . | Locked by plural motions of one member [2015-01] |
Y10T 403/32393 | . . . . . | including bridging keeper [2015-01] |
Y10T 403/32401 | . . . . . | Locked by nesting parts [2015-01] |
Y10T 403/32409 | . . . . . | Members locked in axial alignment [2015-01] |
Y10T 403/32418 | . . . . | Plural distinct positions [2015-01] |
Y10T 403/32426 | . . . | Plural distinct positions [2015-01] |
Y10T 403/32434 | . . . . | Unidirectional movement, e.g., ratchet, etc. [2015-01] |
Y10T 403/32442 | . . . . | At least one discrete position [2015-01] |
Y10T 403/32451 | . . . . . | Step-by-step adjustment [2015-01] |
Y10T 403/32459 | . . . . . . | Retainer extends through aligned recesses [2015-01] |
Y10T 403/32467 | . . . | Telescoping members [2015-01] |
Y10T 403/32475 | . . . . | having detent [2015-01] |
Y10T 403/32483 | . . . . . | Spring biased [2015-01] |
Y10T 403/32491 | . . . . . | Threaded [2015-01] |
Y10T 403/32501 | . . . . . | Cam or wedge [2015-01] |
Y10T 403/32508 | . . . . . | having transverse pin [2015-01] |
Y10T 403/32516 | . . . . | Remotely actuated [2015-01] |
Y10T 403/32524 | . . . . | Self-locking [2015-01] |
Y10T 403/32532 | . . . | Clamped members [2015-01] |
Y10T 403/32541 | . . | Rotatable members resiliently biased to one position [2015-01] |
Y10T 403/32549 | . . | including limit means [2015-01] |
Y10T 403/32557 | . . . | for pivotal motion [2015-01] |
Y10T 403/32565 | . . . . | Ball and socket with restricted movement about one axis [2015-01] |
Y10T 403/32573 | . . . . . | Ball stud passes through confining opening [2015-01] |
Y10T 403/32581 | . . . . | Pin and slot [2015-01] |
Y10T 403/32591 | . . . . | Opposed stops on one member [2015-01] |
Y10T 403/32606 | . . | Pivoted [2015-01] |
Y10T 403/32614 | . . . | including circumferential biasing or damping means [2015-01] |
Y10T 403/32622 | . . . | Rocking or rolling contact [2015-01] |
Y10T 403/32631 | . . . | Universal ball and socket [2015-01] |
Y10T 403/32639 | . . . . | including internal tie means [2015-01] |
Y10T 403/32647 | . . . . | Plural concave surfaces with diverse curvature [2015-01] |
Y10T 403/32655 | . . . . . | Interposed concavo-convex component [2015-01] |
Y10T 403/32663 | . . . . . | Outer surfaces [2015-01] |
Y10T 403/32672 | . . . . | Swiveled ball parts or seat [2015-01] |
Y10T 403/32681 | . . . . | Composite ball [2015-01] |
Y10T 403/32688 | . . . . . | Spring biased segments [2015-01] |
Y10T 403/32696 | . . . . . | Nonmetallic part [2015-01] |
Y10T 403/32704 | . . . . . | Stud extends into ball [2015-01] |
Y10T 403/32713 | . . . . | Elastomerically biased or backed components [2015-01] |
Y10T 403/32721 | . . . . | Elastomeric seat [2015-01] |
Y10T 403/32729 | . . . . | Externally packed [2015-01] |
Y10T 403/32737 | . . . . | including liner, shim, or discrete seat [2015-01] |
Y10T 403/32745 | . . . . . | Spring acts through wedging surfaces [2015-01] |
Y10T 403/32754 | . . . . . | Variably preloaded [2015-01] |
Y10T 403/32762 | . . . . . | Spring-biased seat opposite ball stud [2015-01] |
Y10T 403/32771 | . . . . . | Porous [2015-01] |
Y10T 403/32778 | . . . . . | Completely spacing the members [2015-01] |
Y10T 403/32786 | . . . . | Divided socket-type coupling [2015-01] |
Y10T 403/32795 | . . . . | Bifurcated socket [2015-01] |
Y10T 403/32803 | . . . . | Separable socket sections [2015-01] |
Y10T 403/32811 | . . . . | Spring-biased [2015-01] |
Y10T 403/32819 | . . . | including tension or take-up means [2015-01] |
Y10T 403/32827 | . . . . | Interposed spring means coaxial with pivot [2015-01] |
Y10T 403/32836 | . . . . | Acting through tapered surface on bearing component [2015-01] |
Y10T 403/32844 | . . . . | Manually variable [2015-01] |
Y10T 403/32852 | . . . . | External of bearing assembly, e.g., antirattler, etc. [2015-01] |
Y10T 403/32861 | . . . | T-pivot, e.g., wrist pin, etc. [2015-01] |
Y10T 403/32868 | . . . . | Floating pin [2015-01] |
Y10T 403/32877 | . . . . | Pin is integral with or secured to inner member [2015-01] |
Y10T 403/32885 | . . . . | Expanded pin or end [2015-01] |
Y10T 403/32893 | . . . . | including distinct pin retainer [2015-01] |
Y10T 403/32901 | . . . . . | Unitary clip or plug [2015-01] |
Y10T 403/32909 | . . . . . | Threaded pin end [2015-01] |
Y10T 403/32918 | . . . . | fork and tongue [2015-01] |
Y10T 403/32926 | . . . . . | with interposed antifriction means [2015-01] |
Y10T 403/32934 | . . . . . | Oppositely laterally movable tines [2015-01] |
Y10T 403/32942 | . . . | On oblique interface [2015-01] |
Y10T 403/32951 | . . . | Transverse pin or stud [2015-01] |
Y10T 403/32959 | . . . . | Traverses interposed facing component [2015-01] |
Y10T 403/32967 | . . . . | Attached to or integral with one member [2015-01] |
Y10T 403/32975 | . . | Rotatable [2015-01] |
Y10T 403/32983 | . . . | Rod in socket [2015-01] |
Y10T 403/33 | . | Transverse rod to spaced plate surfaces [2015-01] |
Y10T 403/335 | . . | Retainer utilizes or abuts plural plates [2015-01] |
Y10T 403/34 | . | Branched [2015-01] |
Y10T 403/341 | . . | Three or more radiating members [2015-01] |
Y10T 403/342 | . . . | Polyhedral [2015-01] |
Y10T 403/343 | . . . . | Unilateral of plane [2015-01] |
Y10T 403/344 | . . . | Plural pairs of axially aligned members [2015-01] |
Y10T 403/345 | . . . | Coplanar [2015-01] |
Y10T 403/346 | . . . . | Additional rod held by encompassing means [2015-01] |
Y10T 403/347 | . . | Polyhedral [2015-01] |
Y10T 403/348 | . . | Parallel rods [2015-01] |
Y10T 403/349 | . . | Coplanar [2015-01] |
Y10T 403/36 | . | Three or more serial joints, at least one diverse [2015-01] |
Y10T 403/362 | . . | Nonaligned axes [2015-01] |
Y10T 403/364 | . . | Separable intermediate joint [2015-01] |
Y10T 403/366 | . . . | Axially acting connector [2015-01] |
Y10T 403/368 | . . . | Screw or cam [2015-01] |
Y10T 403/38 | . | Laterally related rods independently joined to transverse surface [2015-01] |
Y10T 403/40 | . | Radially spaced members joined by independent coupling [2015-01] |
Y10T 403/405 | . . | Flexible intermediate member [2015-01] |
Y10T 403/44 | . | Three or more members connected at single locus [2015-01] |
Y10T 403/443 | . . | All encompassed [2015-01] |
Y10T 403/447 | . . | Mutually contacting [2015-01] |
Y10T 403/45 | . | Flexibly connected rigid members [2015-01] |
Y10T 403/451 | . . | Rigid sleeve encompasses flexible bushing [2015-01] |
Y10T 403/452 | . . . | Longitudinally divided sleeve [2015-01] |
Y10T 403/453 | . . | Flexible sleeve-type coupling [2015-01] |
Y10T 403/454 | . . | Connecting pin traverses radially interposed elastomer [2015-01] |
Y10T 403/455 | . . | Elastomer interposed between radially spaced members [2015-01] |
Y10T 403/456 | . . . | Elastomer encompasses shoulder on inner member [2015-01] |
Y10T 403/457 | . . . | including axially acting compressing means [2015-01] |
Y10T 403/458 | . . . | Composite bushing with elastomeric component [2015-01] |
Y10T 403/459 | . . | Helical spring type coupling [2015-01] |
Y10T 403/46 | . | Rod end to transverse side of member [2015-01] |
Y10T 403/4602 | . . | Corner joint [2015-01] |
Y10T 403/47 | . | Molded joint [2015-01] |
Y10T 403/471 | . . | And independent connection [2015-01] |
Y10T 403/472 | . . | including mechanical interlock [2015-01] |
Y10T 403/473 | . . | Socket or open cup for bonding material [2015-01] |
Y10T 403/477 | . . | Fusion bond, e.g., weld, etc. [2015-01] |
Y10T 403/48 | . | Shrunk fit [2015-01] |
Y10T 403/49 | . | Member deformed in situ [2015-01] |
Y10T 403/4916 | . . | Interposed deforming element contacts socket bottom [2015-01] |
Y10T 403/4924 | . . | Inner member is expanded by longitudinally inserted element [2015-01] |
Y10T 403/4933 | . . | by separate, deformable element [2015-01] |
Y10T 403/4941 | . . | Deformation occurs simultaneously with action of separate, diverse function, joint component [2015-01] |
Y10T 403/4949 | . . | Deforming component is inserted section [2015-01] |
Y10T 403/4958 | . . | Separate deforming means remains with joint assembly [2015-01] |
Y10T 403/4966 | . . | Deformation occurs simultaneously with assembly [2015-01] |
Y10T 403/4974 | . . | by piercing [2015-01] |
Y10T 403/4983 | . . | Diverse resistance to lateral deforming force [2015-01] |
Y10T 403/4991 | . . | Both members deformed [2015-01] |
Y10T 403/50 | . | Bridged by diverse connector [2015-01] |
Y10T 403/51 | . | including spaced, diverse connections [2015-01] |
Y10T 403/53 | . | Split end with laterally movable opposed portions [2015-01] |
Y10T 403/535 | . . | with separate force-applying means [2015-01] |
Y10T 403/54 | . | Flexible member is joint component [2015-01] |
Y10T 403/55 | . | Member ends joined by inserted section [2015-01] |
Y10T 403/551 | . . | Externally bridged [2015-01] |
Y10T 403/553 | . . | Laterally inserted section [2015-01] |
Y10T 403/555 | . . | Angle section [2015-01] |
Y10T 403/556 | . . | Section threaded to member [2015-01] |
Y10T 403/557 | . . | Expansible section [2015-01] |
Y10T 403/559 | . . | Fluted or splined section [2015-01] |
Y10T 403/57 | . | Distinct end coupler [2015-01] |
Y10T 403/5706 | . . | Diverse serial connections [2015-01] |
Y10T 403/5713 | . . . | Axially cleft coupler [2015-01] |
Y10T 403/5721 | . . | Single actuator for plural connections [2015-01] |
Y10T 403/5726 | . . . | Axially biased end portions [2015-01] |
Y10T 403/5733 | . . | Plural opposed sockets [2015-01] |
Y10T 403/5741 | . . | Separate screw or pin-type connections [2015-01] |
Y10T 403/5746 | . . | Continuous thread [2015-01] |
Y10T 403/5753 | . . | having separable end caps or plugs [2015-01] |
Y10T 403/5761 | . . | Interrupted periphery, e.g., split or segmental, etc. [2015-01] |
Y10T 403/5766 | . . . | Axially divided segments [2015-01] |
Y10T 403/5773 | . . . . | Interfitting [2015-01] |
Y10T 403/5781 | . . . . | Bolted [2015-01] |
Y10T 403/5786 | . . . | Split [2015-01] |
Y10T 403/5793 | . . | including member wedging or camming means [2015-01] |
Y10T 403/59 | . | Manually releaseable latch type [2015-01] |
Y10T 403/591 | . . | having operating mechanism [2015-01] |
Y10T 403/592 | . . . | Ball detent [2015-01] |
Y10T 403/593 | . . . | Remotely actuated [2015-01] |
Y10T 403/595 | . . . | Lever [2015-01] |
Y10T 403/597 | . . | Swiveled bolt [2015-01] |
Y10T 403/598 | . . | Transversely sliding pin [2015-01] |
Y10T 403/599 | . . | Spring biased manipulator [2015-01] |
Y10T 403/60 | . | Biased catch or latch [2015-01] |
Y10T 403/602 | . . | by separate spring [2015-01] |
Y10T 403/604 | . . . | Radially sliding catch [2015-01] |
Y10T 403/606 | . . | Leaf spring [2015-01] |
Y10T 403/608 | . . | Pivoted [2015-01] |
Y10T 403/61 | . | Side slide: elongated co-linear members [2015-01] |
Y10T 403/65 | . | Scarf [2015-01] |
Y10T 403/655 | . . | Mirror images [2015-01] |
Y10T 403/66 | . | Interfitted members with external bridging piece [2015-01] |
Y10T 403/67 | . | Thimble: screw or cam [2015-01] |
Y10T 403/70 | . | Interfitted members [2015-01] |
Y10T 403/7001 | . . | Crossed rods [2015-01] |
Y10T 403/7003 | . . . | One rod is encompassed by the other [2015-01] |
Y10T 403/7005 | . . | Lugged member, rotary engagement [2015-01] |
Y10T 403/7007 | . . . | Bayonet joint [2015-01] |
Y10T 403/7009 | . . | Rotary binding cam or wedge [2015-01] |
Y10T 403/7011 | . . . | Radially interposed shim or bushing [2015-01] |
Y10T 403/7013 | . . . . | Arcuate slip [2015-01] |
Y10T 403/7016 | . . | Diametric end slot is joint component [2015-01] |
Y10T 403/7018 | . . | including separably interposed key [2015-01] |
Y10T 403/7021 | . . . | Axially extending [2015-01] |
Y10T 403/7022 | . . . . | Resilient [2015-01] |
Y10T 403/7024 | . . . . | Longitudinally stepped or tapered [2015-01] |
Y10T 403/7026 | . . | Longitudinally splined or fluted rod [2015-01] |
Y10T 403/7028 | . . . | Splayed or having a cam surface for anti-backlash [2015-01] |
Y10T 403/7031 | . . . | Rod designed to be manipulable, e.g., twistable, within coupling for quick disconnect [2015-01] |
Y10T 403/7032 | . . . | including a means, e.g., spring biased portion, for misalignment correction [2015-01] |
Y10T 403/7033 | . . . | including a lock or retainer [2015-01] |
Y10T 403/7035 | . . . | Specific angle or shape of rib, key, groove, or shoulder [2015-01] |
Y10T 403/7041 | . . | including set screw [2015-01] |
Y10T 403/7045 | . . | Interdigitated ends [2015-01] |
Y10T 403/7047 | . . | Radially interposed shim or bushing [2015-01] |
Y10T 403/7049 | . . . | Biased by distinct radially acting means [2015-01] |
Y10T 403/7051 | . . . | Wedging or camming [2015-01] |
Y10T 403/7052 | . . . . | Engaged by axial movement [2015-01] |
Y10T 403/7054 | . . . . . | Plural, circumferentially related shims between members [2015-01] |
Y10T 403/7056 | . . . . . | Threaded actuator [2015-01] |
Y10T 403/7058 | . . . . . | Split or slotted bushing [2015-01] |
Y10T 403/7061 | . . . | Resilient [2015-01] |
Y10T 403/7062 | . . | Clamped members [2015-01] |
Y10T 403/7064 | . . . | by wedge or cam [2015-01] |
Y10T 403/7066 | . . . . | having actuator [2015-01] |
Y10T 403/7067 | . . . . . | Threaded actuator [2015-01] |
Y10T 403/7069 | . . . . . . | Axially oriented [2015-01] |
Y10T 403/7071 | . . . . . | Lever actuator [2015-01] |
Y10T 403/7075 | . . | including discrete retainer [2015-01] |
Y10T 403/7077 | . . . | for telescoping members [2015-01] |
Y10T 403/7079 | . . . . | Transverse pin [2015-01] |
Y10T 403/7081 | . . . . . | Multiple retainers [2015-01] |
Y10T 403/7083 | . . . . . | having means to prevent removal of retainer [2015-01] |
Y10T 403/7084 | . . . . . | Bolt, rivet, or screw [2015-01] |
Y10T 403/7086 | . . . . . | Wedge pin [2015-01] |
Y10T 403/7088 | . . . . . | Sliding pin [2015-01] |
Y10T 403/7091 | . . . . . | Expansible retainer [2015-01] |
Y10T 403/7098 | . . | Non-circular rod section is joint component [2015-01] |
Y10T 403/71 | . | Rod side to plate or side [2015-01] |
Y10T 403/7105 | . . | Connected by double clamp [2015-01] |
Y10T 403/7111 | . . | Shackle is integral with or independently attached to proximate side of plate or other side [2015-01] |
Y10T 403/7117 | . . | Flanged or grooved rod [2015-01] |
Y10T 403/7123 | . . | Traversed by connector [2015-01] |
Y10T 403/7129 | . . | Laterally spaced rods [2015-01] |
Y10T 403/7135 | . . . | by separable shim or bushing in connector [2015-01] |
Y10T 403/7141 | . . . | Plural channels in connector [2015-01] |
Y10T 403/7147 | . . | Connected by flexible tie [2015-01] |
Y10T 403/7152 | . . | Lapped rod ends [2015-01] |
Y10T 403/7158 | . . | Diagonal connector [2015-01] |
Y10T 403/7164 | . . | One rod held between bight and other rod extending through aperture in leg of connector [2015-01] |
Y10T 403/7171 | . . | Two rods encompassed by single connector [2015-01] |
Y10T 403/7176 | . . | Resilient clip [2015-01] |
Y10T 403/7182 | . . | Yoke or ring-type connector [2015-01] |
Y10T 403/7188 | . . . | Rod received in open channel [2015-01] |
Y10T 403/7194 | . . | Crossed rods [2015-01] |
Y10T 403/75 | . | having a joining piece extending through aligned openings in plural members [2015-01] |
Y10T 403/76 | . | having a cam, wedge, or tapered portion [2015-01] |
Former US Class 407 Series [2015-01] |
Y10T 407/00 | Cutters, for shaping [2015-01] |
Y10T 407/10 | . | including noncutting work modifying means [2015-01] |
Y10T 407/11 | . | including chip breaker, guide or deflector detachable from tool and tool holder [2015-01] |
Y10T 407/112 | . . | Adjustable relative to cutting edge [2015-01] |
Y10T 407/114 | . . . | including adjusting means [2015-01] |
Y10T 407/116 | . . | Attached to or integral with tool clamping jaw [2015-01] |
Y10T 407/118 | . . | Chip breaker [2015-01] |
Y10T 407/12 | . | Freely movable cutting edge [2015-01] |
Y10T 407/13 | . | Yieldable tool [2015-01] |
Y10T 407/134 | . . | Resiliently mounted tool [2015-01] |
Y10T 407/137 | . . . | including yield stress or flexure limit adjusting means [2015-01] |
Y10T 407/14 | . | with means to apply fluid to cutting tool [2015-01] |
Y10T 407/15 | . | Rotary broach [2015-01] |
Y10T 407/16 | . | Rectilinear broach [2015-01] |
Y10T 407/1614 | . . | Hollow tool for surrounding workpiece [2015-01] |
Y10T 407/1628 | . . | including holder having seat for inserted tool [2015-01] |
Y10T 407/1642 | . . . | Annular tool [2015-01] |
Y10T 407/1657 | . . . | including single tooth [2015-01] |
Y10T 407/1671 | . . | Plural tooth groups [2015-01] |
Y10T 407/1685 | . . | including sequentially acting teeth of stepped cutting width [2015-01] |
Y10T 407/17 | . | Gear cutting tool [2015-01] |
Y10T 407/1705 | . . | Face mill gear cutting tool [2015-01] |
Y10T 407/171 | . . . | Adjustable teeth [2015-01] |
Y10T 407/1715 | . . | Hob [2015-01] |
Y10T 407/172 | . . . | Thread cutting [2015-01] |
Y10T 407/1725 | . . . | including holder having seat for inserted tool [2015-01] |
Y10T 407/173 | . . . | for cutting involute gear tooth [2015-01] |
Y10T 407/1735 | . . | Rotary, gear shaving cutting tool [2015-01] |
Y10T 407/174 | . . | Gear generating, revolving shaper cutting tool [2015-01] |
Y10T 407/1745 | . . | Rotary, tooth form cutting tool [2015-01] |
Y10T 407/18 | . | File or rasp [2015-01] |
Y10T 407/1805 | . . | Flexible blade or carrier therefor [2015-01] |
Y10T 407/181 | . . | Tire rasp [2015-01] |
Y10T 407/1815 | . . | Rotary file or round disc [2015-01] |
Y10T 407/182 | . . | Composite, diverse sector, or assembled [2015-01] |
Y10T 407/1825 | . . | Handle or holder, per se [2015-01] |
Y10T 407/19 | . | Rotary cutting tool [2015-01] |
Y10T 407/1902 | . . | Gang [2015-01] |
Y10T 407/1904 | . . | Composite body of diverse material [2015-01] |
Y10T 407/1906 | . . | including holder [i.e., head] having seat for inserted tool [2015-01] |
Y10T 407/1908 | . . . | Face or end mill [2015-01] |
Y10T 407/191 | . . . . | Plural simultaneously usable separable tools in common seat or common clamp actuator for plural simultaneously usable tools [2015-01] |
Y10T 407/1912 | . . . . | Tool adjustable relative to holder [2015-01] |
Y10T 407/1914 | . . . . . | Radially [2015-01] |
Y10T 407/1916 | . . . . . . | And axially [2015-01] |
Y10T 407/1918 | . . . . . . . | Selectively [2015-01] |
Y10T 407/192 | . . . . | with separate means to fasten tool to holder [2015-01] |
Y10T 407/1922 | . . . . . | Wedge clamp element [2015-01] |
Y10T 407/1924 | . . . . | Specified tool shape [2015-01] |
Y10T 407/1926 | . . . | Plural simultaneously usable separable tools in common seat or common clamp actuator for plural simultaneously usable tools [2015-01] |
Y10T 407/1928 | . . . | Tool adjustable relative to holder [2015-01] |
Y10T 407/193 | . . . . | Radially [2015-01] |
Y10T 407/1932 | . . . | with means to fasten tool seat to holder [2015-01] |
Y10T 407/1934 | . . . | with separate means to fasten tool to holder [2015-01] |
Y10T 407/1936 | . . . . | Apertured tool [2015-01] |
Y10T 407/1938 | . . . . | Wedge clamp element [2015-01] |
Y10T 407/194 | . . . . . | Resilient clamp jaw [2015-01] |
Y10T 407/1942 | . . . | Peripherally spaced tools [2015-01] |
Y10T 407/1944 | . . . . | Sectional support [2015-01] |
Y10T 407/1946 | . . | Face or end mill [2015-01] |
Y10T 407/1948 | . . . | with cutting edge entirely across end of tool [e.g., router bit, end mill, etc.] [2015-01] |
Y10T 407/195 | . . | Compound tooth arrangement [2015-01] |
Y10T 407/1952 | . . | Having peripherally spaced teeth [2015-01] |
Y10T 407/1954 | . . . | Axially tapering tool [2015-01] |
Y10T 407/1956 | . . . | Circumferentially staggered [2015-01] |
Y10T 407/1958 | . . . . | Plural teeth spaced about a helix [2015-01] |
Y10T 407/196 | . . . | Varying in cutting edge profile [2015-01] |
Y10T 407/1962 | . . . | Specified tooth shape or spacing [2015-01] |
Y10T 407/1964 | . . . . | Arcuate cutting edge [2015-01] |
Y10T 407/1966 | . . . . . | Helical tooth [2015-01] |
Y10T 407/20 | . | Profiled circular tool [2015-01] |
Y10T 407/21 | . | Arc segment tool [2015-01] |
Y10T 407/22 | . | including holder having seat for inserted tool [2015-01] |
Y10T 407/2202 | . . | Plural spaced seats and common holder [2015-01] |
Y10T 407/2204 | . . . | Relatively adjustable seats [2015-01] |
Y10T 407/2206 | . . . | Simultaneously usable [2015-01] |
Y10T 407/2208 | . . | Plural simultaneously usable separable tools in common seat or common clamp actuator for plural simultaneously usable tools [2015-01] |
Y10T 407/221 | . . . | Adjustable tool [2015-01] |
Y10T 407/2212 | . . | with tool ejector [2015-01] |
Y10T 407/2214 | . . | with separate means to adjust tool to and fro relative to holder [2015-01] |
Y10T 407/2216 | . . . | with indicator [2015-01] |
Y10T 407/2218 | . . . | Plural provisions for adjustment [2015-01] |
Y10T 407/222 | . . . | by moving tool seat [2015-01] |
Y10T 407/2222 | . . | Tool adjustable relative to holder [2015-01] |
Y10T 407/2224 | . . . | with indicator [2015-01] |
Y10T 407/2226 | . . . | Plural provisions for adjustment [2015-01] |
Y10T 407/2228 | . . . . | Plural interfering seats [2015-01] |
Y10T 407/223 | . . . . | including pivotable seat or tool [2015-01] |
Y10T 407/2232 | . . . . . | with detent [2015-01] |
Y10T 407/2234 | . . . . . | Pivoted seat [2015-01] |
Y10T 407/2236 | . . . . . . | And pivotable tool [2015-01] |
Y10T 407/2238 | . . . | by adjustable or replaceable stop [2015-01] |
Y10T 407/224 | . . . . | Adjustable [2015-01] |
Y10T 407/2242 | . . . . . | Screw [2015-01] |
Y10T 407/2244 | . . . | by movement of seat relative to holder [2015-01] |
Y10T 407/2246 | . . . . | Pivoted seat [2015-01] |
Y10T 407/2248 | . . . | Pivoted tool [2015-01] |
Y10T 407/225 | . . . | Resiliently biased tool clamping jaw [2015-01] |
Y10T 407/2252 | . . . | Rectilinearly [2015-01] |
Y10T 407/2254 | . . . . | including rotatable cam clamp element [2015-01] |
Y10T 407/2256 | . . . . | including wedge clamp element [2015-01] |
Y10T 407/2258 | . . . . . | And guide or detent [2015-01] |
Y10T 407/226 | . . . . | including detent [2015-01] |
Y10T 407/2262 | . . . . | Tool gripped directly by set screw [2015-01] |
Y10T 407/2264 | . . . . | Slidable jaw [2015-01] |
Y10T 407/2266 | . . | Holder adapted for tools of different shape [2015-01] |
Y10T 407/2268 | . . | with chip breaker, guide or deflector [2015-01] |
Y10T 407/227 | . . | with separate means to fasten tool seat to holder [2015-01] |
Y10T 407/2272 | . . | with separate means to fasten tool to holder [2015-01] |
Y10T 407/2274 | . . . | Apertured tool [2015-01] |
Y10T 407/2276 | . . . . | with means projecting through aperture to force tool laterally against reaction surface [2015-01] |
Y10T 407/2278 | . . . . . | Tilting clamp element and separate means to tilt same [2015-01] |
Y10T 407/228 | . . . | Rotatable cam clamp element [2015-01] |
Y10T 407/2282 | . . . | including tool holding clamp and clamp actuator [2015-01] |
Y10T 407/2284 | . . . . | Wedge clamp element [2015-01] |
Y10T 407/2286 | . . . . | Resiliently biased clamp jaw [2015-01] |
Y10T 407/2288 | . . . . . | Integral with holder [2015-01] |
Y10T 407/229 | . . . . | Pivoted jaw [2015-01] |
Y10T 407/2292 | . . . . | Slidable jaw [2015-01] |
Y10T 407/23 | . | including tool having plural alternatively usable cutting edges [2015-01] |
Y10T 407/235 | . . | with integral chip breaker, guide or deflector [2015-01] |
Y10T 407/24 | . | with chip breaker, guide or deflector [2015-01] |
Y10T 407/245 | . . | comprising concave surface in cutting face of tool [2015-01] |
Y10T 407/25 | . | including cut off tool [2015-01] |
Y10T 407/26 | . | comprising cutting edge bonded to tool shank [2015-01] |
Y10T 407/27 | . | comprising tool of specific chemical composition [2015-01] |
Y10T 407/28 | . | Miscellaneous [2015-01] |
Former US Class 408 Series [2015-01] |
Y10T 408/00 | Cutting by use of rotating axially moving tool [2015-01] |
Y10T 408/03 | . | Processes [2015-01] |
Y10T 408/04 | . . | Bit detachable [2015-01] |
Y10T 408/05 | . | with means to weigh or test work or product [2015-01] |
Y10T 408/08 | . | with means to regulate operation by use of templet, tape, card, or other replaceable information supply [2015-01] |
Y10T 408/10 | . | with interlock between machine elements [2015-01] |
Y10T 408/13 | . | with randomly-actuated stopping means [2015-01] |
Y10T 408/14 | . . | Responsive to condition of Tool or tool-drive [2015-01] |
Y10T 408/15 | . . | Responsive to condition of work or product [2015-01] |
Y10T 408/16 | . | with control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 408/165 | . . | to control Tool rotation [2015-01] |
Y10T 408/17 | . . | to control infeed [2015-01] |
Y10T 408/172 | . . . | Responsive to Tool [2015-01] |
Y10T 408/173 | . . . | Responsive to work [2015-01] |
Y10T 408/175 | . . | to control relative positioning of Tool and work [2015-01] |
Y10T 408/18 | . | with stopping upon completion of prescribed operation [2015-01] |
Y10T 408/20 | . . | Responsive to condition of work or product [2015-01] |
Y10T 408/21 | . | with signal, indicator, illuminator or optical means [2015-01] |
Y10T 408/23 | . | including means to cause Tool to progressively vibrate toward work [2015-01] |
Y10T 408/26 | . | with means to condition tool [2015-01] |
Y10T 408/29 | . | with means to deForm work temporarily [2015-01] |
Y10T 408/31 | . | Convertible cutting means [2015-01] |
Y10T 408/33 | . . | Utilizing common cutting Tool [2015-01] |
Y10T 408/34 | . | Combined cutting means [2015-01] |
Y10T 408/344 | . . | including Tool operating on rotating work [2015-01] |
Y10T 408/348 | . . | Plural other type cutting means [2015-01] |
Y10T 408/35 | . . . | including plural rotating tools [2015-01] |
Y10T 408/352 | . . | including rotating cutter other than rotating, axially moving Tool [2015-01] |
Y10T 408/353 | . . . | Crystalline cutter [2015-01] |
Y10T 408/355 | . . . | Utilized in cutting work or product to length [2015-01] |
Y10T 408/3555 | . . . . | Adapted to cut entire thickness of work at one pass [2015-01] |
Y10T 408/356 | . . | including plunging [single stroke] cutter [2015-01] |
Y10T 408/36 | . | Machine including plural tools [2015-01] |
Y10T 408/365 | . . | Axes of tools moving with work during operation [2015-01] |
Y10T 408/367 | . . . | including means to infeed Tool and means to infeed work or including coaxial tools [2015-01] |
Y10T 408/368 | . . . | Plural work stations [2015-01] |
Y10T 408/37 | . . | Turret of tools [2015-01] |
Y10T 408/375 | . . | Coaxial tools [2015-01] |
Y10T 408/378 | . . . | Coaxial, opposed tools [2015-01] |
Y10T 408/3784 | . . . . | with additional, converging Tool [2015-01] |
Y10T 408/3788 | . . . . | Plural pairs of coaxial, opposed tools [2015-01] |
Y10T 408/3792 | . . . . | with means to sequentially feed tools toward work [2015-01] |
Y10T 408/3796 | . . . . | with interconnected means to simultaneously feed tools [2015-01] |
Y10T 408/38 | . . | Plural, simultaneously operational tools [2015-01] |
Y10T 408/3806 | . . . | with plural simultaneously operational work stations [2015-01] |
Y10T 408/3809 | . . . . | Successively acting on workpiece [2015-01] |
Y10T 408/381 | . . . . . | Pivotally mounted, work-advancing, work-supporting means, pivot-axis parallel to tool-axis [2015-01] |
Y10T 408/3811 | . . . | with provision for adjustment of relationship of axes [2015-01] |
Y10T 408/3817 | . . . | at least one Tool driven by orbiting wrist plate [2015-01] |
Y10T 408/3822 | . . . | at least one Tool including flexible drive connection [2015-01] |
Y10T 408/3828 | . . . | with work-infeed [2015-01] |
Y10T 408/3833 | . . . | with means to advance work relative to Tool [2015-01] |
Y10T 408/3839 | . . . | with presser-foot [2015-01] |
Y10T 408/3844 | . . . | with tool-opposing, work-engaging surface [2015-01] |
Y10T 408/385 | . . | Rotatable about parallel axes [2015-01] |
Y10T 408/39 | . | with radially outer limit of cutting edge moving to define cylinder partially, but not entirely encircled by work [2015-01] |
Y10T 408/42 | . | Axis of Tool moving with work during operation [2015-01] |
Y10T 408/44 | . | with means to apply transient, fluent medium to work or product [2015-01] |
Y10T 408/45 | . . | including Tool with duct [2015-01] |
Y10T 408/453 | . . . | and means to move gaseous fluid by application of vacuum [2015-01] |
Y10T 408/455 | . . . | Conducting channel extending to end of Tool [2015-01] |
Y10T 408/458 | . . . | including nozzle [2015-01] |
Y10T 408/46 | . . | including nozzle [2015-01] |
Y10T 408/47 | . | with work-infeed means [2015-01] |
Y10T 408/476 | . . | Driven by fluid motor [2015-01] |
Y10T 408/482 | . . | Driven by means having sliding engagement therewith [2015-01] |
Y10T 408/488 | . . | Driven by lever or connecting link [2015-01] |
Y10T 408/494 | . . | and gear to drive infeed means [2015-01] |
Y10T 408/50 | . | with product handling or receiving means [2015-01] |
Y10T 408/51 | . . | Ejector [2015-01] |
Y10T 408/52 | . | with work advancing or guiding means [2015-01] |
Y10T 408/54 | . . | Means to intermittently advance work [2015-01] |
Y10T 408/545 | . . . | Rotary, work-supporting means [2015-01] |
Y10T 408/55 | . | with work-engaging structure other than Tool or tool-support [2015-01] |
Y10T 408/551 | . . | with means actuated by work to release Tool from fixed position in Tool support [2015-01] |
Y10T 408/552 | . . . | Adapted to engage work at tool-axis [2015-01] |
Y10T 408/553 | . . | Centering means adapted to be replaced by Tool [2015-01] |
Y10T 408/554 | . . | Magnetic or suction means [2015-01] |
Y10T 408/556 | . . | Tool supporting wheel [2015-01] |
Y10T 408/5565 | . . . | Wheel-axis parallel to tool-axis [2015-01] |
Y10T 408/557 | . . | Frictionally engaging sides of opening in work [2015-01] |
Y10T 408/558 | . . . | Opening coaxial with Tool [2015-01] |
Y10T 408/5583 | . . . . | Engaging sides of opening being enlarged by Tool [2015-01] |
Y10T 408/5584 | . . . . . | Engaging surface axially advanced of tool-action [2015-01] |
Y10T 408/5586 | . . . . . | Engaging surface subsequent to tool-action on that surface [2015-01] |
Y10T 408/5587 | . . . . | Valve fitting [2015-01] |
Y10T 408/559 | . . | Funnel like work-engaging surface cooperating with protuberance on work [2015-01] |
Y10T 408/56 | . . | Adapted to "form" recession in work [2015-01] |
Y10T 408/5605 | . . . | Recession at tool-axis [2015-01] |
Y10T 408/561 | . . | Having tool-opposing, work-engaging surface [2015-01] |
Y10T 408/5612 | . . . | Tool having shiftable tool-axis [2015-01] |
Y10T 408/5614 | . . . | Angularly adjustable surface [2015-01] |
Y10T 408/5616 | . . . . | Adjustable about axis that is parallel to tool-axis [2015-01] |
Y10T 408/5617 | . . . | Laterally adjustable surface [2015-01] |
Y10T 408/5619 | . . . | Flexible or concatenated member [2015-01] |
Y10T 408/5621 | . . . | Connected to Tool through opening being enlarged by Tool [2015-01] |
Y10T 408/5622 | . . . . | Plural, coaxially opposing, work-engaging means [2015-01] |
Y10T 408/5623 | . . . | with presser foot [2015-01] |
Y10T 408/56238 | . . . . | Encompassed by Tool during cut [2015-01] |
Y10T 408/56245 | . . . . | including tool-guide [or bushing] [2015-01] |
Y10T 408/56253 | . . . . | Base supported machine [2015-01] |
Y10T 408/5626 | . . . | with means to move Tool relative to other work-engaging structure along tool-axis [2015-01] |
Y10T 408/5627 | . . . . | Having sliding engagement therewith [2015-01] |
Y10T 408/56275 | . . . . . | Screw coaxial with Tool [2015-01] |
Y10T 408/5628 | . . . | Tool having screw-thread engaging frame to cause infeed [2015-01] |
Y10T 408/563 | . . | Work-gripping clamp [2015-01] |
Y10T 408/5633 | . . . | Adapted to coaxially grip round work [2015-01] |
Y10T 408/56337 | . . . . | Oppositely moving lateral clamps [2015-01] |
Y10T 408/5634 | . . . . . | Three or more moving clamps [2015-01] |
Y10T 408/56343 | . . . . | Base supported clamp [2015-01] |
Y10T 408/5635 | . . . | Oppositely moving lateral clamps [2015-01] |
Y10T 408/5638 | . . . | Adjustable relative to tool-axis [2015-01] |
Y10T 408/564 | . . | Movable relative to Tool along tool-axis [2015-01] |
Y10T 408/5647 | . . . | including means to move Tool [2015-01] |
Y10T 408/5653 | . . . | with means to bias Tool away from work [2015-01] |
Y10T 408/566 | . . | Axially fixed to Tool [2015-01] |
Y10T 408/5665 | . . . | Work-engaging surface parallel to tool-axis [2015-01] |
Y10T 408/567 | . . | Adjustable, tool-guiding jig [2015-01] |
Y10T 408/568 | . . . | Guide bushing [2015-01] |
Y10T 408/569 | . . | Bushing [2015-01] |
Y10T 408/57 | . | Tool-support with means to receive tool-position indicator [2015-01] |
Y10T 408/60 | . | Plural tool-assemblages [2015-01] |
Y10T 408/62 | . . | Coaxial [2015-01] |
Y10T 408/625 | . . . | Spring biased [2015-01] |
Y10T 408/63 | . | Tool or tool-support with torque-applying ratchet [2015-01] |
Y10T 408/637 | . . | with thrust applying means [2015-01] |
Y10T 408/639 | . . . | Reversible ratchet [2015-01] |
Y10T 408/641 | . . . | Double-acting ratchet [2015-01] |
Y10T 408/643 | . . | Reversible ratchet [2015-01] |
Y10T 408/65 | . | Means to drive tool [2015-01] |
Y10T 408/655 | . . | with specific Tool structure [2015-01] |
Y10T 408/66 | . . | Friction gearing [2015-01] |
Y10T 408/665 | . . | Universal or flexible drive connection to rotate Tool [2015-01] |
Y10T 408/67 | . . | Belt and pulley [2015-01] |
Y10T 408/675 | . . | including means to move Tool along tool-axis [2015-01] |
Y10T 408/6757 | . . . | Fluid means [2015-01] |
Y10T 408/6764 | . . . | Laterally adjustable Tool [2015-01] |
Y10T 408/6771 | . . . | with clutch means [2015-01] |
Y10T 408/6774 | . . . . | including plural speed drive [2015-01] |
Y10T 408/6776 | . . . . | Actuated by Tool movement [2015-01] |
Y10T 408/6779 | . . . | Rack and pinion [2015-01] |
Y10T 408/6786 | . . . | Manually moved lever [2015-01] |
Y10T 408/6793 | . . . | Screw coaxial with Tool [2015-01] |
Y10T 408/68 | . | Tool or tool-support with thrust-applying machine-engaging screw [2015-01] |
Y10T 408/70 | . | Tool or tool-support with torque-applying clutch [2015-01] |
Y10T 408/72 | . . | Friction clutch [2015-01] |
Y10T 408/73 | . | Tool or tool-support with torque-applying spline [2015-01] |
Y10T 408/75 | . . | Relative motion of splined shaft and tool-support causing release of Tool from operating position [2015-01] |
Y10T 408/76 | . | Tool-carrier with vibration-damping means [2015-01] |
Y10T 408/78 | . | Tool of specific diverse material [2015-01] |
Y10T 408/81 | . | Tool having crystalline cutting edge [2015-01] |
Y10T 408/83 | . | Tool-support with means to move Tool relative to tool-support [2015-01] |
Y10T 408/85 | . . | to move radially [2015-01] |
Y10T 408/852 | . . . | with Tool releasing trigger [2015-01] |
Y10T 408/853 | . . . . | and separate Tool setting means [2015-01] |
Y10T 408/854 | . . . | to move eccentrically mounted Tool [2015-01] |
Y10T 408/855 | . . . . | Tool-support including plural, adjustable sections [2015-01] |
Y10T 408/856 | . . . | Moving means including pinion engaging rack-like surface of Tool [2015-01] |
Y10T 408/858 | . . . | Moving means including wedge, screw or cam [2015-01] |
Y10T 408/8583 | . . . . | with resiliently urged Tool [2015-01] |
Y10T 408/85837 | . . . . . | with spring retainer [2015-01] |
Y10T 408/85843 | . . . . . | Resilient Tool or tool-support [2015-01] |
Y10T 408/8585 | . . . . | including oppositely moving, diverging tools [2015-01] |
Y10T 408/8588 | . . . . | Axially slidable moving-means [2015-01] |
Y10T 408/85884 | . . . . . | Tool pivotally mounted on support [2015-01] |
Y10T 408/85888 | . . . . . | Having axially spaced shoulders [2015-01] |
Y10T 408/85892 | . . . . . | Screw driven wedge or cam [2015-01] |
Y10T 408/85893 | . . . . . . | Screw with axis radially spaced from tool-axis [2015-01] |
Y10T 408/85894 | . . . . . . | Annular wedge-collar [2015-01] |
Y10T 408/858945 | . . . . . . . | Axially spaced tool-retaining collars [2015-01] |
Y10T 408/858946 | . . . . . . . . | with travelling wedge [2015-01] |
Y10T 408/858948 | . . . . . . . . | Tool having axially facing, collar-receiving groove [2015-01] |
Y10T 408/858949 | . . . . . . . . | including two-piece collar [2015-01] |
Y10T 408/85895 | . . . . . . | Traveling wedge [2015-01] |
Y10T 408/858953 | . . . . . . . | Interfitting, tool-retaining wedge [2015-01] |
Y10T 408/858955 | . . . . . . . . | including separable interfitting element [2015-01] |
Y10T 408/858957 | . . . . . . . | Having externally threaded shank connected to tool-support [2015-01] |
Y10T 408/85896 | . . . . . | Annular wedge-collar [2015-01] |
Y10T 408/859 | . . . . | Rotary cam [2015-01] |
Y10T 408/8591 | . . . . . | Scroll plate [2015-01] |
Y10T 408/85913 | . . . . . . | Volute scroll [2015-01] |
Y10T 408/85915 | . . . . . . | with means to rotate scroll [2015-01] |
Y10T 408/85918 | . . . . . . | with adjustable means to limit scroll movement [2015-01] |
Y10T 408/8592 | . . . . . | Coaxial with tool-axis [2015-01] |
Y10T 408/8593 | . . . . | Wedge moving perpendicular to tool-axis [2015-01] |
Y10T 408/8595 | . . . . | Pivotable tool-support [2015-01] |
Y10T 408/8598 | . . . . | Screw extending perpendicular to tool-axis [2015-01] |
Y10T 408/85985 | . . . . . | Plural tools moved by diametrically opposed screws [2015-01] |
Y10T 408/85988 | . . . . . . | Screws mounted on common shaft [2015-01] |
Y10T 408/8599 | . . . . . | Tool having pitch-stabilizing ridge [2015-01] |
Y10T 408/85995 | . . . . . | with tool-holding clamp and clamp actuator [2015-01] |
Y10T 408/86 | . | Tool-support with means to permit positioning of the Tool relative to support [2015-01] |
Y10T 408/865 | . . | Pivotable Tool [2015-01] |
Y10T 408/868 | . . . | with multiple cutting positions [2015-01] |
Y10T 408/87 | . . | Tool having stepped cutting edges [2015-01] |
Y10T 408/8713 | . . . | including means to permit both radial and axial positioning of edge [2015-01] |
Y10T 408/8725 | . . . | including means to permit relative axial positioning of edges [2015-01] |
Y10T 408/8729 | . . . . | with work-engaging structure other than cutting edge [2015-01] |
Y10T 408/8734 | . . . . | including central Tool axially movable relative to support [2015-01] |
Y10T 408/8738 | . . . | including inverse cutting edge [2015-01] |
Y10T 408/875 | . . | including means to "form" depression in work [2015-01] |
Y10T 408/88 | . . | including central-lead [2015-01] |
Y10T 408/885 | . . | including tool-holding clamp and clamp actuator [2015-01] |
Y10T 408/888 | . . . | Movable along tool-axis [2015-01] |
Y10T 408/89 | . | Tool or Tool with support [2015-01] |
Y10T 408/892 | . . | with work-engaging structure detachable from cutting edge [2015-01] |
Y10T 408/8923 | . . . | Removable central lead [2015-01] |
Y10T 408/8925 | . . . | Depth-limiting member [2015-01] |
Y10T 408/8928 | . . . | Adjustable [2015-01] |
Y10T 408/893 | . . | Hollow milling Tool [2015-01] |
Y10T 408/895 | . . | Having axial, core-receiving central portion [2015-01] |
Y10T 408/8953 | . . . | with lateral outlet [2015-01] |
Y10T 408/8957 | . . . | and having stepped cutting edges [2015-01] |
Y10T 408/896 | . . | Having product-receiving chamber [2015-01] |
Y10T 408/8967 | . . . | and central lead-screw [2015-01] |
Y10T 408/8973 | . . . | and central lead [2015-01] |
Y10T 408/898 | . . | Helical ribbon Tool [2015-01] |
Y10T 408/899 | . . | Having inversely angled cutting edge [2015-01] |
Y10T 408/90 | . . . | and axially extending peripheral cutting spur [2015-01] |
Y10T 408/901 | . . | Having axially extending peripheral cutting spur [2015-01] |
Y10T 408/902 | . . | Having central lead-screw [2015-01] |
Y10T 408/904 | . . | with pitch-stabilizing ridge [2015-01] |
Y10T 408/9042 | . . . | and radially spaced cutting edge [2015-01] |
Y10T 408/9044 | . . . | including cutting teeth of different width [2015-01] |
Y10T 408/9045 | . . . . | and different root circles [2015-01] |
Y10T 408/9046 | . . . | including tapered section [2015-01] |
Y10T 408/90467 | . . . . | and relieved cutting edge [2015-01] |
Y10T 408/90473 | . . . . | including work-embracing cutting edges [2015-01] |
Y10T 408/9048 | . . . | Extending outwardly from tool-axis [2015-01] |
Y10T 408/905 | . . | Having stepped cutting edges [2015-01] |
Y10T 408/906 | . . . | Axially spaced [2015-01] |
Y10T 408/9065 | . . . . | with central lead [2015-01] |
Y10T 408/907 | . . | including detailed shank [2015-01] |
Y10T 408/909 | . . | Having peripherally spaced cutting edges [2015-01] |
Y10T 408/9093 | . . . | Each formed by a pair of axially facing facets [2015-01] |
Y10T 408/9095 | . . . | with axially extending relief channel [2015-01] |
Y10T 408/9097 | . . . . | Spiral channel [2015-01] |
Y10T 408/9098 | . . . | with means to retain Tool to support [2015-01] |
Y10T 408/90987 | . . . . | Wedge means [2015-01] |
Y10T 408/90993 | . . . . | Screw driven means [2015-01] |
Y10T 408/91 | . | Machine frame [2015-01] |
Y10T 408/92 | . . | with counterweight mechanism [2015-01] |
Y10T 408/93 | . . | including pivotally mounted tool-carrier [2015-01] |
Y10T 408/935 | . . . | including laterally movable tool-carrier [2015-01] |
Y10T 408/94 | . | Tool-support [2015-01] |
Y10T 408/95 | . . | with tool-retaining means [2015-01] |
Y10T 408/953 | . . . | Clamping jaws [2015-01] |
Y10T 408/957 | . . . | Tool adapter [2015-01] |
Y10T 408/96 | . | Miscellaneous [2015-01] |
Y10T 408/97 | . . | Drill bushings [2015-01] |
Y10T 408/98 | . . | Drill guide [2015-01] |
Y10T 408/99 | . . | Adjustable stop [2015-01] |
Former US Class 409 Series [2015-01] |
Y10T 409/00 | Gear cutting, milling, or planing [2015-01] |
Y10T 409/10 | . | Gear cutting [2015-01] |
Y10T 409/100159 | . . | with regulation of operation by use of templet, card, or other replaceable information supply [2015-01] |
Y10T 409/100318 | . . . | including follower for templet [2015-01] |
Y10T 409/100477 | . . | and burnishing simultaneously [2015-01] |
Y10T 409/100636 | . . | with compensation for backlash in drive means [2015-01] |
Y10T 409/100795 | . . | with work or product advancing [2015-01] |
Y10T 409/100954 | . . . | Utilizing transfer arm [2015-01] |
Y10T 409/101113 | . . | Gear chamfering or deburring [2015-01] |
Y10T 409/101272 | . . . | Using relatively reciprocating or oscillating cutter [2015-01] |
Y10T 409/101431 | . . | Gear tooth shape generating [2015-01] |
Y10T 409/10159 | . . . | Hobbing [2015-01] |
Y10T 409/101749 | . . . . | Process [2015-01] |
Y10T 409/101908 | . . . . . | Generating tooth for bevel gear [2015-01] |
Y10T 409/102067 | . . . . | including means to shift hob between cutting passes [2015-01] |
Y10T 409/102226 | . . . . | with control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 409/102385 | . . . . | Plural hobs [2015-01] |
Y10T 409/102544 | . . . . | including infeed means [2015-01] |
Y10T 409/102703 | . . . . . | to infeed along axis of work rotation [2015-01] |
Y10T 409/102862 | . . . . . . | Infeed of cutter [2015-01] |
Y10T 409/103021 | . . . . . . . | and infeed radially of axis of work rotation [2015-01] |
Y10T 409/10318 | . . . . . . . | Vertically [2015-01] |
Y10T 409/103339 | . . . . . | to infeed radially of axis of work rotation [2015-01] |
Y10T 409/103498 | . . . . . . | Infeed of cutter [2015-01] |
Y10T 409/103657 | . . . . . . . | and infeed tangentially of work axis [2015-01] |
Y10T 409/103816 | . . . | Milling with radial faced tool [2015-01] |
Y10T 409/103975 | . . . . | Process [2015-01] |
Y10T 409/104134 | . . . . | Adapted to cut bevel gear [2015-01] |
Y10T 409/104293 | . . . . . | with means to continuously rotate work and means to co-form all teeth of gear [2015-01] |
Y10T 409/104452 | . . . . . | Bevel gear having nonparallel opposing tooth flanks [2015-01] |
Y10T 409/104611 | . . . . . | including rotary cutter cradle [2015-01] |
Y10T 409/10477 | . . . | by relative axial movement between synchronously indexing or rotating work and cutter [2015-01] |
Y10T 409/104929 | . . . . | Crowning [2015-01] |
Y10T 409/105088 | . . . . | Displacing cutter axially relative to work [e.g., gear shaving, etc.] [2015-01] |
Y10T 409/105247 | . . . . . | Using gear shaper-cutter [2015-01] |
Y10T 409/105406 | . . . . . . | Plural distinct cutting edges [2015-01] |
Y10T 409/105565 | . . . . . . | Cutting rotating work, the axis of which lies in a plane intersecting the cutter axis [2015-01] |
Y10T 409/105724 | . . . | Gear shaving [2015-01] |
Y10T 409/105883 | . . . | Using rotary cutter [2015-01] |
Y10T 409/106042 | . . . . | having axially directed cutting edge [2015-01] |
Y10T 409/106201 | . . . . | Plural rotary cutters [2015-01] |
Y10T 409/10636 | . . . . | On reciprocating carriage [2015-01] |
Y10T 409/106519 | . . . | Using reciprocating or oscillating cutter [2015-01] |
Y10T 409/106678 | . . . . | Bevel gear cutting [2015-01] |
Y10T 409/106837 | . . . . . | Dual cutters [2015-01] |
Y10T 409/106996 | . . . . . | Double acting cutter [2015-01] |
Y10T 409/107155 | . . . . | Rectilinearly reciprocating cutter [2015-01] |
Y10T 409/107314 | . . . . . | Cutter comprising a rack [2015-01] |
Y10T 409/107473 | . . . | Making a noncircular gear, worm, rotor, or a planar-faced gear [2015-01] |
Y10T 409/107632 | . . | Gear shaving [2015-01] |
Y10T 409/107791 | . . | Using rotary cutter [2015-01] |
Y10T 409/10795 | . . . | Process [2015-01] |
Y10T 409/108109 | . . . | End mill [2015-01] |
Y10T 409/108268 | . . . . | Radially faced [2015-01] |
Y10T 409/108427 | . . . . . | Using plural, selectively usable tools [2015-01] |
Y10T 409/108586 | . . . | Plural rotary cutters [2015-01] |
Y10T 409/108745 | . . . | Cutting action along work axis [2015-01] |
Y10T 409/108904 | . . . . | Cutting action intersecting work axis [2015-01] |
Y10T 409/109063 | . . | Using reciprocating or oscillating cutter [2015-01] |
Y10T 409/109222 | . . . | Broach [2015-01] |
Y10T 409/109381 | . . . | including circumferentially disposed cutting edges [2015-01] |
Y10T 409/10954 | . . | Work dividing or checking of work position or division [2015-01] |
Y10T 409/109699 | . . | with work clamping [2015-01] |
Y10T 409/20 | . | with furbishing of cutter [2015-01] |
Y10T 409/30 | . | Milling [2015-01] |
Y10T 409/300056 | . . | Thread or helix generating [2015-01] |
Y10T 409/300112 | . . . | Process [2015-01] |
Y10T 409/300168 | . . . | with means to regulate operation by use of templet, card, or other replaceable information supply [2015-01] |
Y10T 409/300224 | . . . . | Complete cycle [2015-01] |
Y10T 409/30028 | . . . . | to regulate cutting depth [e.g., relief, taper, etc.] [2015-01] |
Y10T 409/300336 | . . . . | to regulate rate of motion [e.g., stopping, etc.] [2015-01] |
Y10T 409/300392 | . . . | with nonthread or nonhelix generating, milling cutter [2015-01] |
Y10T 409/300448 | . . . | with means to advance work or product [2015-01] |
Y10T 409/300504 | . . . | Plural cutters or work holders [2015-01] |
Y10T 409/30056 | . . . | with planetary cutter [2015-01] |
Y10T 409/300616 | . . . | Work means to move work axially and means to interrelate work movement with cutter rotation [2015-01] |
Y10T 409/300672 | . . . | with means to rotate work and means to interrelatedly infeed the work relative to the cutter [2015-01] |
Y10T 409/300728 | . . . . | Means to infeed the cutter [2015-01] |
Y10T 409/300784 | . . . | with means to circumferentially adjust the position of the cutter with respect to the work [2015-01] |
Y10T 409/30084 | . . | with regulation of operation by templet, card, or other replaceable information supply [2015-01] |
Y10T 409/300896 | . . . | with sensing of numerical information and regulation without mechanical connection between sensing means and regulated means [i.e., numerical control] [2015-01] |
Y10T 409/300952 | . . . | to cut lock key [2015-01] |
Y10T 409/301008 | . . . . | Using templet other than a key [2015-01] |
Y10T 409/301064 | . . . . | Complete cycle [2015-01] |
Y10T 409/30112 | . . . | Process [2015-01] |
Y10T 409/301176 | . . . | Reproducing means [2015-01] |
Y10T 409/301232 | . . . . | including pantograph cutter-carrier [2015-01] |
Y10T 409/301288 | . . . . . | and means to move work at work station [2015-01] |
Y10T 409/301344 | . . . . . . | About work axis [2015-01] |
Y10T 409/3014 | . . . . . | Pivotally supported for vertical movement [2015-01] |
Y10T 409/301456 | . . . . . | and means to counterbalance carrier [2015-01] |
Y10T 409/301512 | . . . . . | including plural cutters [2015-01] |
Y10T 409/301568 | . . . . | by use of pivotally supported tracer [2015-01] |
Y10T 409/301624 | . . . . | Duplicating means [2015-01] |
Y10T 409/30168 | . . . . . | with means for operation without manual intervention [2015-01] |
Y10T 409/301736 | . . . . . . | to make a double curvature foil [2015-01] |
Y10T 409/301792 | . . . . . . | including means to sense optical or magnetic image [2015-01] |
Y10T 409/301848 | . . . . . . | with means to support templet above or under work [2015-01] |
Y10T 409/301904 | . . . . . . | including tracer adapted to trigger electrical energy [2015-01] |
Y10T 409/30196 | . . . . . . . | to actuate electrically driven work or tool moving means [2015-01] |
Y10T 409/302016 | . . . . . . . | to actuate fluid driven work or tool moving means [2015-01] |
Y10T 409/302072 | . . . . . . | including tracer adapted to trigger fluid energy [2015-01] |
Y10T 409/302128 | . . . . . . . | to actuate fluid driven work or tool moving means [2015-01] |
Y10T 409/302184 | . . . . . . . . | including cutter and tracer fixed to move laterally together [2015-01] |
Y10T 409/30224 | . . . . . . | and provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/302296 | . . . . . . . | including plural cutters [2015-01] |
Y10T 409/302352 | . . . . . . | including plural cutters [2015-01] |
Y10T 409/302408 | . . . . . . | including cross-slide tool carrier [2015-01] |
Y10T 409/302464 | . . . . . | including plural cutters [2015-01] |
Y10T 409/30252 | . . . . . | including cross-slide tool carrier [2015-01] |
Y10T 409/302576 | . . . . . | with means to support templet above or under work [2015-01] |
Y10T 409/302632 | . . . . . | with provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/302688 | . . . . | with provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/302744 | . . . . . | and means for operation without manual intervention [2015-01] |
Y10T 409/3028 | . . . . . . | including tracer adapted to trigger electrical or fluid energy [2015-01] |
Y10T 409/302856 | . . . . | For using planar templet in cutting profile [e.g., contour map from planar map, etc.] [2015-01] |
Y10T 409/302912 | . . . . | including means for operation without manual intervention [2015-01] |
Y10T 409/302968 | . . . | including means for operation without manual intervention [2015-01] |
Y10T 409/303024 | . . . . | including simultaneously usable plural tracers or including tracer adapted to simultaneously use plural templets [2015-01] |
Y10T 409/30308 | . . . . . | to make a double curvature foil [2015-01] |
Y10T 409/303136 | . . . . | to make a double curvature foil [2015-01] |
Y10T 409/303192 | . . . . | including cutter and tracer fixed to move together [2015-01] |
Y10T 409/303248 | . . . . | with provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/303304 | . . . | and provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/30336 | . . . | including cutter and tracer fixed to move together [2015-01] |
Y10T 409/303416 | . . | Templet, tracer, or cutter [2015-01] |
Y10T 409/303472 | . . . | Tracer [2015-01] |
Y10T 409/303528 | . . . . | Adapted to trigger electrical energy [2015-01] |
Y10T 409/303584 | . . . . . | Photocell [2015-01] |
Y10T 409/30364 | . . . . | Adapted to trigger fluid energy [2015-01] |
Y10T 409/303696 | . . . | Templet [2015-01] |
Y10T 409/303752 | . . | Process [2015-01] |
Y10T 409/303808 | . . . | including infeeding [2015-01] |
Y10T 409/303864 | . . | with means to weigh or test work or product [2015-01] |
Y10T 409/30392 | . . | with means to protect operative or machine [e.g., guard, safety device, etc.] [2015-01] |
Y10T 409/303976 | . . | with means to control temperature or lubricate [2015-01] |
Y10T 409/304032 | . . . | Cutter or work [2015-01] |
Y10T 409/304088 | . . | with means to remove chip [2015-01] |
Y10T 409/304144 | . . | Means to trim edge [2015-01] |
Y10T 409/3042 | . . | Means to remove scale or raised surface imperfection [2015-01] |
Y10T 409/304256 | . . . | Means to remove flash or burr [2015-01] |
Y10T 409/304312 | . . | with means to dampen vibration [2015-01] |
Y10T 409/304368 | . . | Means to mill epitrochoidal shape [2015-01] |
Y10T 409/304424 | . . | Means for internal milling [2015-01] |
Y10T 409/30448 | . . | with detachable or auxiliary cutter support to convert cutting action [2015-01] |
Y10T 409/304536 | . . | including means to infeed work to cutter [2015-01] |
Y10T 409/304592 | . . . | with compensation for backlash in drive means [2015-01] |
Y10T 409/304648 | . . . | with control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 409/304704 | . . . . | In response to cutter or cutter carriage [2015-01] |
Y10T 409/30476 | . . . . | In response to work or work carriage [2015-01] |
Y10T 409/304816 | . . . . . | to control rate of infeed or return [2015-01] |
Y10T 409/304872 | . . . . . | to control limit of infeed [2015-01] |
Y10T 409/304928 | . . . . . . | Adapted to hydraulically or pneumatically stimulate control [2015-01] |
Y10T 409/304984 | . . . . . . | Adapted to electrically stimulate control [2015-01] |
Y10T 409/30504 | . . . . | to control rate of infeed or return [2015-01] |
Y10T 409/305096 | . . . . | to effect stopping of infeed [2015-01] |
Y10T 409/305152 | . . . | with means to change rate of infeed [2015-01] |
Y10T 409/305208 | . . . | Means to mill indeterminate length work [2015-01] |
Y10T 409/305264 | . . . | Multiple work stations [2015-01] |
Y10T 409/30532 | . . . | with means to advance work or product [2015-01] |
Y10T 409/305376 | . . . . | Vertically [2015-01] |
Y10T 409/305432 | . . . . | Endless or orbital work or product advancing means [2015-01] |
Y10T 409/305488 | . . . | to reciprocate or oscillate work [2015-01] |
Y10T 409/305544 | . . . | with work holder [2015-01] |
Y10T 409/3056 | . . . . | and means to selectively position work [2015-01] |
Y10T 409/305656 | . . . . | including means to support work for rotation during operation [2015-01] |
Y10T 409/305712 | . . . . . | and including means to infeed cutter toward work axis [2015-01] |
Y10T 409/305768 | . . . . . | with linear movement of work [2015-01] |
Y10T 409/305824 | . . . . . | with angular movement of work [2015-01] |
Y10T 409/30588 | . . . | including friction gearing drive [2015-01] |
Y10T 409/305936 | . . . | including fluid drive [2015-01] |
Y10T 409/305992 | . . | with means to effect stopping upon completion of operation [2015-01] |
Y10T 409/306048 | . . | with means to advance work or product [2015-01] |
Y10T 409/306104 | . . . | Endless or orbital work or product advancing means [2015-01] |
Y10T 409/30616 | . . | with means to precisely reposition work [2015-01] |
Y10T 409/306216 | . . | Randomly manipulated, work supported, or work following device [2015-01] |
Y10T 409/306272 | . . . | For machining commutator [2015-01] |
Y10T 409/306328 | . . . | For cutting longitudinal groove in shaft [e.g., keyway, etc.] [2015-01] |
Y10T 409/306384 | . . . | with work supported guide means [2015-01] |
Y10T 409/30644 | . . . . | to guide tool to move in arcuate path [2015-01] |
Y10T 409/306496 | . . . | with work follower [2015-01] |
Y10T 409/306552 | . . . | Randomly manipulated [2015-01] |
Y10T 409/306608 | . . . . | End mill [e.g., router, etc.] [2015-01] |
Y10T 409/306664 | . . | including means to infeed rotary cutter toward work [2015-01] |
Y10T 409/30672 | . . . | with means to limit penetration into work [2015-01] |
Y10T 409/306776 | . . . | Axially [2015-01] |
Y10T 409/306832 | . . . . | with infeed control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 409/306888 | . . . . . | In response to cutter condition [2015-01] |
Y10T 409/306944 | . . . . . | In response to work condition [2015-01] |
Y10T 409/307 | . . . . | with work holder [2015-01] |
Y10T 409/307056 | . . . . | and laterally [2015-01] |
Y10T 409/307112 | . . . . . | Simultaneously [2015-01] |
Y10T 409/307168 | . . . . | Plural cutters [2015-01] |
Y10T 409/307224 | . . . | with infeed control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 409/30728 | . . . . | In response to cutter condition [2015-01] |
Y10T 409/307336 | . . . . | In response to work condition [2015-01] |
Y10T 409/307392 | . . . | with means to change rate of infeed [2015-01] |
Y10T 409/307448 | . . . | with work holder [2015-01] |
Y10T 409/307504 | . . . . | Indexable [2015-01] |
Y10T 409/30756 | . . . | Machining arcuate surface [2015-01] |
Y10T 409/307616 | . . . . | with means to move cutter eccentrically [2015-01] |
Y10T 409/307672 | . . . | Angularly adjustable cutter head [2015-01] |
Y10T 409/307728 | . . . | including gantry-type cutter-carrier [2015-01] |
Y10T 409/307784 | . . . | Plural cutters [2015-01] |
Y10T 409/30784 | . . | including means to adustably position cutter [2015-01] |
Y10T 409/307896 | . . . | with work holder or guide [2015-01] |
Y10T 409/307952 | . . . | Linear adjustment [2015-01] |
Y10T 409/308008 | . . . . | with control for adjustment means responsive to activator stimulated by condition sensor [2015-01] |
Y10T 409/308064 | . . . . . | Responsive to position of cutter [2015-01] |
Y10T 409/30812 | . . . . . | and means to clamp cutter support in adjusted position [2015-01] |
Y10T 409/308176 | . . . . | with position indicator or limit means [2015-01] |
Y10T 409/308232 | . . . . | and angular adjustment [2015-01] |
Y10T 409/308288 | . . . . | including gantry-type cutter-carrier [2015-01] |
Y10T 409/308344 | . . . . | Plural cutters [2015-01] |
Y10T 409/3084 | . . . | with position indicator or limit means [2015-01] |
Y10T 409/308456 | . . . | with right angle cutter drive [2015-01] |
Y10T 409/308512 | . . . | Compound angular adjustment [2015-01] |
Y10T 409/308568 | . . . | Plural cutters [2015-01] |
Y10T 409/308624 | . . | with limit means to aid in positioning of cutter bit or work [e.g., gauge, stop, etc.] [2015-01] |
Y10T 409/30868 | . . | Work support [2015-01] |
Y10T 409/308736 | . . . | with position indicator or stop [2015-01] |
Y10T 409/308792 | . . . | Indexable [2015-01] |
Y10T 409/308848 | . . . . | including dividing head [2015-01] |
Y10T 409/308904 | . . . . . | Multiple row dividing head [2015-01] |
Y10T 409/30896 | . . . | with angular adjustment [2015-01] |
Y10T 409/309016 | . . . | with work holder or guide [2015-01] |
Y10T 409/309072 | . . . . | including cutter limited to rotary motion [2015-01] |
Y10T 409/309128 | . . . | with means to adjust work support vertically [2015-01] |
Y10T 409/309184 | . . | including cutter limited to rotary motion [2015-01] |
Y10T 409/30924 | . . . | Cutter turning about vertical axis [2015-01] |
Y10T 409/309296 | . . | Detachable or repositionable tool head [2015-01] |
Y10T 409/309352 | . . | Cutter spindle or spindle support [2015-01] |
Y10T 409/309408 | . . . | with cutter holder [2015-01] |
Y10T 409/309464 | . . . . | and draw bar [2015-01] |
Y10T 409/30952 | . . | with cutter holder [2015-01] |
Y10T 409/309576 | . . | Machine frame [2015-01] |
Y10T 409/309632 | . . . | Overarm harness structure [2015-01] |
Y10T 409/309688 | . . . | including counterbalancing means [2015-01] |
Y10T 409/309744 | . . . | including means to compensate for deformation [2015-01] |
Y10T 409/3098 | . . . . | Deflection of cutter spindle [2015-01] |
Y10T 409/309856 | . . . | Convertible from lathe [2015-01] |
Y10T 409/309912 | . . . | including relatively movable components and means to relatively immobilize these components [2015-01] |
Y10T 409/309968 | . . | Tailstock [2015-01] |
Y10T 409/40 | . | Broaching [2015-01] |
Y10T 409/400175 | . . | Process [2015-01] |
Y10T 409/40035 | . . | with control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 409/400525 | . . . | Responsive to condition of work or product [2015-01] |
Y10T 409/4007 | . . | with means to distribute cutter infeed force [2015-01] |
Y10T 409/400875 | . . | with means to select cutter or to select or modify cutter drive [2015-01] |
Y10T 409/40105 | . . | with means to clean, lubricate, or modify temperature of work or cutter [2015-01] |
Y10T 409/401225 | . . | with product handling means [2015-01] |
Y10T 409/4014 | . . . | Between plural broaching stations [2015-01] |
Y10T 409/401575 | . . . | Means to eject broached product [2015-01] |
Y10T 409/40175 | . . . | Chip removal means [2015-01] |
Y10T 409/401925 | . . | with means to protect operative or machine [e.g., guard, safety device, etc.] [2015-01] |
Y10T 409/4021 | . . . | with safety means for overload or safety interlock [2015-01] |
Y10T 409/402275 | . . | with work immobilizer and means to activate work immobilizer interrelated with cutter infeed, work infeed, or work advance [2015-01] |
Y10T 409/40245 | . . | with work infeed or advancing means and means to clamp the work thereto, which clamping means is interrelated with work or cutter infeed [2015-01] |
Y10T 409/402625 | . . | Means to remove flash or burr [2015-01] |
Y10T 409/4028 | . . | Means for cutting groove [2015-01] |
Y10T 409/402975 | . . . | Arcuate groove in cylindrical surface [2015-01] |
Y10T 409/40315 | . . . . | Rifling [2015-01] |
Y10T 409/403325 | . . | Orbital carrier for cutter [2015-01] |
Y10T 409/4035 | . . | Orbital carrier for work [2015-01] |
Y10T 409/403675 | . . | with means to cyclically manipulate cutter or cutter support [2015-01] |
Y10T 409/40385 | . . . | to reorient, introduce, or remove cutter [2015-01] |
Y10T 409/404025 | . . . | Cutter released to interim support at termination of cutting stroke [2015-01] |
Y10T 409/4042 | . . . | to remove and return cutter to cutter support [2015-01] |
Y10T 409/404375 | . . | with plural cutters [2015-01] |
Y10T 409/40455 | . . | with means to advance, infeed, or manipulate work [2015-01] |
Y10T 409/404725 | . . . | Interrelated with cutter infeed [2015-01] |
Y10T 409/4049 | . . . . | including means supporting work and additional means opposing infeed force [2015-01] |
Y10T 409/405075 | . . . . | including work indexing means for sequential cutting of different surfaces of a single workpiece [2015-01] |
Y10T 409/40525 | . . . . | including work indexing means for sequential cutting of surfaces of different workpieces [2015-01] |
Y10T 409/405425 | . . . . | with means to retract work from path of tool's idle return stroke [2015-01] |
Y10T 409/4056 | . . . | to infeed work past cutter [2015-01] |
Y10T 409/405775 | . . | with means to hold work during cutting [2015-01] |
Y10T 409/40595 | . . . | including work clamping means [2015-01] |
Y10T 409/406125 | . . . | with means to adjust or facilitate adjustment of work or work holder [2015-01] |
Y10T 409/4063 | . . . | with means on work or work holder to guide cutter during infeed [2015-01] |
Y10T 409/406475 | . . | Cutter infeed means [2015-01] |
Y10T 409/40665 | . . . | Imparting rectilinear motion to cutter [2015-01] |
Y10T 409/406825 | . . . . | and rotary motion to cutter [2015-01] |
Y10T 409/407 | . . . . | Fluid powered means [2015-01] |
Y10T 409/407175 | . . . . | Rack means [2015-01] |
Y10T 409/40735 | . . . . | Screw means [2015-01] |
Y10T 409/407525 | . . | Machine frame [2015-01] |
Y10T 409/4077 | . . | Cutter support or guide [2015-01] |
Y10T 409/50 | . | Planing [2015-01] |
Y10T 409/500164 | . . | with regulation of operation by templet, card, or other replaceable information supply [2015-01] |
Y10T 409/500328 | . . . | including use of tracer adapted to trigger electrical or fluid energy [2015-01] |
Y10T 409/500492 | . . . . | including provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/500656 | . . . | including provision for circumferential relative movement of cutter and work [2015-01] |
Y10T 409/50082 | . . | Process [2015-01] |
Y10T 409/500984 | . . | with means to lubricate [2015-01] |
Y10T 409/501148 | . . | with product handling means [2015-01] |
Y10T 409/501312 | . . | Randomly manipulated, work supported, or work following device [2015-01] |
Y10T 409/501476 | . . | Means to remove flash or burr [2015-01] |
Y10T 409/50164 | . . . | Elongated work [2015-01] |
Y10T 409/501804 | . . . . | Flash or burr inside hollow work [2015-01] |
Y10T 409/501968 | . . . . | Transverse burr [2015-01] |
Y10T 409/502132 | . . . | Flat work [2015-01] |
Y10T 409/502296 | . . | of commutator [2015-01] |
Y10T 409/50246 | . . | Means for trimming edge [e.g., chamfering, scarfing, etc.] [2015-01] |
Y10T 409/502624 | . . | Means for cutting groove [2015-01] |
Y10T 409/502788 | . . . | Arcuate groove [2015-01] |
Y10T 409/502952 | . . . . | For rifling [2015-01] |
Y10T 409/503116 | . . . | Inside hollow work [2015-01] |
Y10T 409/50328 | . . | Means for shaving by blade spanning work surface [2015-01] |
Y10T 409/503444 | . . . | Concave work surface [e.g., bearing, stereotype printing plate, etc,] [2015-01] |
Y10T 409/503608 | . . . | Circumferential surface [2015-01] |
Y10T 409/503772 | . . . | including rack driven infeed means [2015-01] |
Y10T 409/503936 | . . . | including roller infeed means [2015-01] |
Y10T 409/5041 | . . | Means for cutting arcuate surface [2015-01] |
Y10T 409/504264 | . . . | Cycloidal surface [2015-01] |
Y10T 409/504428 | . . . | with work infeed and means to arcuately reposition the cutter [2015-01] |
Y10T 409/504592 | . . . | with work infeed and means to arcuately reposition the work [2015-01] |
Y10T 409/504756 | . . | with means to relatively infeed cutter and work [2015-01] |
Y10T 409/50492 | . . . | and means to rotate work and cutter at same rate about converging axes [2015-01] |
Y10T 409/505084 | . . . | with plural sequentially acting cutters or with double acting cutter [2015-01] |
Y10T 409/505248 | . . . | and means to vary rate of infeed [2015-01] |
Y10T 409/505412 | . . . | Reciprocating work infeed means [2015-01] |
Y10T 409/505576 | . . . . | with fluid-driven bed [2015-01] |
Y10T 409/50574 | . . . . | with rack-driven bed [2015-01] |
Y10T 409/505904 | . . . . | with screw-driven bed [2015-01] |
Y10T 409/506068 | . . . . | and means to permit repositioning of cutter laterally [2015-01] |
Y10T 409/506232 | . . . | Reciprocating cutter infeed means [2015-01] |
Y10T 409/506396 | . . . . | Reciprocating cutter horizontally [2015-01] |
Y10T 409/50656 | . . . . . | with work support and lead screw to reposition work support [2015-01] |
Y10T 409/506724 | . . . . . | with fluid-powered means to drive cutter [2015-01] |
Y10T 409/506888 | . . . . . | with pivoting link to drive cutter [2015-01] |
Y10T 409/507052 | . . . . . . | Link driven by crank [2015-01] |
Y10T 409/507216 | . . . . . | with rack to drive cutter [2015-01] |
Y10T 409/50738 | . . . . . | with screw to drive cutter [2015-01] |
Y10T 409/507544 | . . . . | with link or cam to drive cutter [2015-01] |
Y10T 409/507708 | . . . . | with rack to drive cutter [2015-01] |
Y10T 409/507872 | . . . | including means causing return stroke [2015-01] |
Y10T 409/508036 | . . | Machine frame [2015-01] |
Y10T 409/5082 | . . . | Means to permit repositioning of cutter [2015-01] |
Y10T 409/508364 | . . . . | Laterally [2015-01] |
Y10T 409/508528 | . . . . . | Plural independently positioned cutters [2015-01] |
Y10T 409/508692 | . . . . . | including clutch [2015-01] |
Y10T 409/508856 | . . . . . | including repositioning means and means to effect stopping thereof [2015-01] |
Y10T 409/50902 | . . . | including relatively movable components and means to relatively immobilize these components [2015-01] |
Y10T 409/509184 | . . . | Work table [2015-01] |
Y10T 409/509348 | . . | Tool head [2015-01] |
Y10T 409/509512 | . . . | with selectively usable cutting edges [2015-01] |
Y10T 409/509676 | . . . | with means to permit repositioning of cutting for idle return stroke [2015-01] |
Y10T 409/50984 | . . . . | comprising pivotable cutter or cutter support [2015-01] |
Former US Class 428 Series [2015-01] |
Y10T 428/00 | Stock material or miscellaneous articles [2015-01] |
Y10T 428/11 | . | Magnetic recording head [2015-01] |
Y10T 428/1107 | . . | Magnetoresistive [2015-01] |
Y10T 428/1114 | . . . | having tunnel junction effect [2015-01] |
Y10T 428/1121 | . . . | Multilayer [2015-01] |
Y10T 428/1129 | . . . . | Super lattice [e.g., giant magneto resistance [GMR] or colossal magneto resistance [CMR], etc.] [2015-01] |
Y10T 428/1136 | . . . | Single film [2015-01] |
Y10T 428/1143 | . . . | with defined structural feature [2015-01] |
Y10T 428/115 | . . | Magnetic layer composition [2015-01] |
Y10T 428/1157 | . . | Substrate composition [2015-01] |
Y10T 428/1164 | . . | with protective film [2015-01] |
Y10T 428/1171 | . . | with defined laminate structural detail [2015-01] |
Y10T 428/1179 | . . . | Head with slider structure [2015-01] |
Y10T 428/1186 | . . . | with head pole component [2015-01] |
Y10T 428/1193 | . . | with interlaminar component [e.g., adhesion layer, etc.] [2015-01] |
Y10T 428/12 | . | All metal or with adjacent metals [2015-01] |
Y10T 428/12007 | . . | Component of composite having metal continuous phase interengaged with nonmetal continuous phase [2015-01] |
Y10T 428/12014 | . . | having metal particles [2015-01] |
Y10T 428/12021 | . . . | having composition or density gradient or differential porosity [2015-01] |
Y10T 428/12028 | . . . | Composite; i.e., plural, adjacent, spatially distinct metal components [e.g., layers, etc.] [2015-01] |
Y10T 428/12035 | . . . . | Fiber, asbestos, or cellulose in or next to particulate component [2015-01] |
Y10T 428/12042 | . . . . | Porous component [2015-01] |
Y10T 428/12049 | . . . . | Nonmetal component [2015-01] |
Y10T 428/12056 | . . . . . | Entirely inorganic [2015-01] |
Y10T 428/12063 | . . . . | Nonparticulate metal component [2015-01] |
Y10T 428/12069 | . . . . . | Plural nonparticulate metal components [2015-01] |
Y10T 428/12076 | . . . . . . | Next to each other [2015-01] |
Y10T 428/12083 | . . . . . . . | Nonmetal in particulate component [2015-01] |
Y10T 428/1209 | . . . . . | Plural particulate metal components [2015-01] |
Y10T 428/12097 | . . . . . | Nonparticulate component encloses particles [2015-01] |
Y10T 428/12104 | . . . . . | Particles discontinuous [2015-01] |
Y10T 428/12111 | . . . . . . | Separated by nonmetal matrix or binder [e.g., welding electrode, etc.] [2015-01] |
Y10T 428/12118 | . . . . . . . | Nonparticulate component has Ni-, Cu-, or Zn-base [2015-01] |
Y10T 428/12125 | . . . . . . . | Nonparticulate component has Fe-base [2015-01] |
Y10T 428/12132 | . . . . . . . . | Next to Fe-containing particles [2015-01] |
Y10T 428/12139 | . . . . . | Nonmetal particles in particulate component [2015-01] |
Y10T 428/12146 | . . . . | Nonmetal particles in a component [2015-01] |
Y10T 428/12153 | . . . | Interconnected void structure [e.g., permeable, etc.] [2015-01] |
Y10T 428/1216 | . . . | Continuous interengaged phases of plural metals, or oriented fiber containing [2015-01] |
Y10T 428/12167 | . . . . | Nonmetal containing [2015-01] |
Y10T 428/12174 | . . . . | Mo or W containing [2015-01] |
Y10T 428/12181 | . . | Composite powder [e.g., coated, etc.] [2015-01] |
Y10T 428/12188 | . . | having marginal feature for indexing or weakened portion for severing [2015-01] |
Y10T 428/12194 | . . . | For severing perpendicular to longitudinal dimension [2015-01] |
Y10T 428/12201 | . . | Width or thickness variation or marginal cuts repeating longitudinally [2015-01] |
Y10T 428/12208 | . . . | Variation in both width and thickness [2015-01] |
Y10T 428/12215 | . . . | Marginal slots [i.e., deeper than wide] [2015-01] |
Y10T 428/12222 | . . | Shaped configuration for melting [e.g., package, etc.] [2015-01] |
Y10T 428/12229 | . . | Intermediate article [e.g., blank, etc.] [2015-01] |
Y10T 428/12236 | . . . | Panel having nonrectangular perimeter [2015-01] |
Y10T 428/12243 | . . . . | Disk [2015-01] |
Y10T 428/1225 | . . . . | Symmetrical [2015-01] |
Y10T 428/12257 | . . . . . | Only one plane of symmetry [2015-01] |
Y10T 428/12264 | . . . | having outward flange, gripping means or interlocking feature [2015-01] |
Y10T 428/12271 | . . . | having discrete fastener, marginal fastening, taper, or end structure [2015-01] |
Y10T 428/12278 | . . . . | Same structure at both ends of plural taper [2015-01] |
Y10T 428/12285 | . . . . | Single taper [e.g., ingot, etc.] [2015-01] |
Y10T 428/12292 | . . | Workpiece with longitudinal passageway or stopweld material [e.g., for tubular stock, etc.] [2015-01] |
Y10T 428/12299 | . . | Workpiece mimicking finished stock having nonrectangular or noncircular cross section [2015-01] |
Y10T 428/12306 | . . | Workpiece of parallel, nonfastened components [e.g., fagot, pile, etc.] [2015-01] |
Y10T 428/12313 | . . . | Arranged to avoid lateral displacement [2015-01] |
Y10T 428/12319 | . . . | Composite [2015-01] |
Y10T 428/12326 | . . | with provision for limited relative movement between components [2015-01] |
Y10T 428/12333 | . . | Helical or with helical component [2015-01] |
Y10T 428/1234 | . . | Honeycomb, or with grain orientation or elongated elements in defined angular relationship in respective components [e.g., parallel, inter- secting, etc.] [2015-01] |
Y10T 428/12347 | . . | Plural layers discontinuously bonded [e.g., spot-weld, mechanical fastener, etc.] [2015-01] |
Y10T 428/12354 | . . | Nonplanar, uniform-thickness material having symmetrical channel shape or reverse fold [e.g., making acute angle, etc.] [2015-01] |
Y10T 428/12361 | . . | having aperture or cut [2015-01] |
Y10T 428/12368 | . . . | Struck-out portion type [2015-01] |
Y10T 428/12375 | . . | having member which crosses the plane of another member [e.g., T or X cross section, etc.] [2015-01] |
Y10T 428/12382 | . . | Defined configuration of both thickness and nonthickness surface or angle therebetween [e.g., rounded corners, etc.] [2015-01] |
Y10T 428/12389 | . . | having variation in thickness [2015-01] |
Y10T 428/12396 | . . . | Discontinuous surface component [2015-01] |
Y10T 428/12403 | . . . | Longitudinally smooth and symmetrical [2015-01] |
Y10T 428/1241 | . . | Nonplanar uniform thickness or nonlinear uniform diameter [e.g., L-shape] [2015-01] |
Y10T 428/12417 | . . . | Intersecting corrugating or dimples not in a single line [e.g., waffle form, etc.] [2015-01] |
Y10T 428/12424 | . . | Mass of only fibers [2015-01] |
Y10T 428/12431 | . . | Foil or filament smaller than 6 mils [2015-01] |
Y10T 428/12438 | . . . | Composite [2015-01] |
Y10T 428/12444 | . . | Embodying fibers interengaged or between layers [e.g., paper, etc.] [2015-01] |
Y10T 428/12451 | . . | Macroscopically anomalous interface between layers [2015-01] |
Y10T 428/12458 | . . | having composition, density, or hardness gradient [2015-01] |
Y10T 428/12465 | . . | having magnetic properties, or preformed fiber orientation coordinate with shape [2015-01] |
Y10T 428/12472 | . . | Microscopic interfacial wave or roughness [2015-01] |
Y10T 428/12479 | . . | Porous [e.g., foamed, spongy, cracked, etc.] [2015-01] |
Y10T 428/12486 | . . | Laterally noncoextensive components [e.g., embedded, etc.] [2015-01] |
Y10T 428/12493 | . . | Composite; i.e., plural, adjacent, spatially distinct metal components [e.g., layers, joint, etc.] [2015-01] |
Y10T 428/125 | . . . | Deflectable by temperature change [e.g., thermostat element] [2015-01] |
Y10T 428/12507 | . . . . | More than two components [2015-01] |
Y10T 428/12514 | . . . . | One component Cu-based [2015-01] |
Y10T 428/12521 | . . . . | Both components Fe-based with more than 10% Ni [2015-01] |
Y10T 428/12528 | . . . | Semiconductor component [2015-01] |
Y10T 428/12535 | . . . | with additional, spatially distinct nonmetal component [2015-01] |
Y10T 428/12542 | . . . . | More than one such component [2015-01] |
Y10T 428/12549 | . . . . . | Adjacent to each other [2015-01] |
Y10T 428/12556 | . . . . | Organic component [2015-01] |
Y10T 428/12562 | . . . . . | Elastomer [2015-01] |
Y10T 428/12569 | . . . . . | Synthetic resin [2015-01] |
Y10T 428/12576 | . . . . | Boride, carbide or nitride component [2015-01] |
Y10T 428/12583 | . . . . | Component contains compound of adjacent metal [2015-01] |
Y10T 428/1259 | . . . . . | Oxide [2015-01] |
Y10T 428/12597 | . . . . | Noncrystalline silica or noncrystalline plural-oxide component [e.g., glass, etc.] [2015-01] |
Y10T 428/12604 | . . . . . | Film [e.g., glaze, etc.] [2015-01] |
Y10T 428/12611 | . . . . | Oxide-containing component [2015-01] |
Y10T 428/12618 | . . . . . | Plural oxides [2015-01] |
Y10T 428/12625 | . . . . | Free carbon containing component [2015-01] |
Y10T 428/12632 | . . . | Four or more distinct components with alternate recurrence of each type component [2015-01] |
Y10T 428/12639 | . . . | Adjacent, identical composition, components [2015-01] |
Y10T 428/12646 | . . . . | Group VIII or IB metal-base [2015-01] |
Y10T 428/12653 | . . . . . | Fe, containing 0.01-1.7% carbon [i.e., steel] [2015-01] |
Y10T 428/1266 | . . . | O, S, or organic compound in metal component [2015-01] |
Y10T 428/12667 | . . . . | Oxide of transition metal or Al [2015-01] |
Y10T 428/12674 | . . . | Ge- or Si-base component [2015-01] |
Y10T 428/12681 | . . . | Ga-, In-, Tl- or Group VA metal-base component [2015-01] |
Y10T 428/12687 | . . . | Pb- and Sn-base components: alternative to or next to each other [2015-01] |
Y10T 428/12694 | . . . . | and next to Cu- or Fe-base component [2015-01] |
Y10T 428/12701 | . . . | Pb-base component [2015-01] |
Y10T 428/12708 | . . . | Sn-base component [2015-01] |
Y10T 428/12715 | . . . . | Next to Group IB metal-base component [2015-01] |
Y10T 428/12722 | . . . . | Next to Group VIII metal-base component [2015-01] |
Y10T 428/12729 | . . . | Group IIA metal-base component [2015-01] |
Y10T 428/12736 | . . . | Al-base component [2015-01] |
Y10T 428/12743 | . . . . | Next to refractory [Group IVB, VB, or VIB] metal-base component [2015-01] |
Y10T 428/1275 | . . . . | Next to Group VIII or IB metal-base component [2015-01] |
Y10T 428/12757 | . . . . . | Fe [2015-01] |
Y10T 428/12764 | . . . . | Next to Al-base component [2015-01] |
Y10T 428/12771 | . . . | Transition metal-base component [2015-01] |
Y10T 428/12778 | . . . . | Alternative base metals from diverse categories [2015-01] |
Y10T 428/12785 | . . . . | Group IIB metal-base component [2015-01] |
Y10T 428/12792 | . . . . . | Zn-base component [2015-01] |
Y10T 428/12799 | . . . . . . | Next to Fe-base component [e.g., galvanized] [2015-01] |
Y10T 428/12806 | . . . . | Refractory [Group IVB, VB, or VIB] metal-base component [2015-01] |
Y10T 428/12812 | . . . . . | Diverse refractory group metal-base components: alternative to or next to each other [2015-01] |
Y10T 428/12819 | . . . . . | Group VB metal-base component [2015-01] |
Y10T 428/12826 | . . . . . | Group VIB metal-base component [2015-01] |
Y10T 428/12833 | . . . . . . | Alternative to or next to each other [2015-01] |
Y10T 428/1284 | . . . . . . | W-base component [2015-01] |
Y10T 428/12847 | . . . . . . | Cr-base component [2015-01] |
Y10T 428/12854 | . . . . . . . | Next to Co-, Fe-, or Ni-base component [2015-01] |
Y10T 428/12861 | . . . . | Group VIII or IB metal-base component [2015-01] |
Y10T 428/12868 | . . . . . | Group IB metal-base component alternative to platinum group metal-base component [e.g., precious metal, etc.] [2015-01] |
Y10T 428/12875 | . . . . . | Platinum group metal-base component [2015-01] |
Y10T 428/12882 | . . . . . | Cu-base component alternative to Ag-, Au-, or Ni-base component [2015-01] |
Y10T 428/12889 | . . . . . | Au-base component [2015-01] |
Y10T 428/12896 | . . . . . | Ag-base component [2015-01] |
Y10T 428/12903 | . . . . . | Cu-base component [2015-01] |
Y10T 428/1291 | . . . . . . | Next to Co-, Cu-, or Ni-base component [2015-01] |
Y10T 428/12917 | . . . . . . | Next to Fe-base component [2015-01] |
Y10T 428/12924 | . . . . . . . | Fe-base has 0.01-1.7% carbon [i.e., steel] [2015-01] |
Y10T 428/12931 | . . . . . | Co-, Fe-, or Ni-base components, alternative to each other [2015-01] |
Y10T 428/12937 | . . . . . | Co- or Ni-base component next to Fe-base component [2015-01] |
Y10T 428/12944 | . . . . . | Ni-base component [2015-01] |
Y10T 428/12951 | . . . . . | Fe-base component [2015-01] |
Y10T 428/12958 | . . . . . . | Next to Fe-base component [2015-01] |
Y10T 428/12965 | . . . . . . . | Both containing 0.01-1.7% carbon [i.e., steel] [2015-01] |
Y10T 428/12972 | . . . . . . | Containing 0.01-1.7% carbon [i.e., steel] [2015-01] |
Y10T 428/12979 | . . . . . . . | Containing more than 10% nonferrous elements [e.g., high alloy, stainless] [2015-01] |
Y10T 428/12986 | . . . | Adjacent functionally defined components [2015-01] |
Y10T 428/12993 | . . | Surface feature [e.g., rough, mirror] [2015-01] |
Y10T 428/13 | . | Hollow or container type article [e.g., tube, vase, etc.] [2015-01] |
Y10T 428/1303 | . . | Paper containing [e.g., paperboard, cardboard, fiberboard, etc.] [2015-01] |
Y10T 428/1307 | . . . | Bag or tubular film [e.g., pouch, flexible food casing, envelope, etc.] [2015-01] |
Y10T 428/131 | . . | Glass, ceramic, or sintered, fused, fired, or calcined metal oxide or metal carbide containing [e.g., porcelain, brick, cement, etc.] [2015-01] |
Y10T 428/1314 | . . . | Contains fabric, fiber particle, or filament made of glass, ceramic, or sintered, fused, fired, or calcined metal oxide, or metal carbide or other inorganic compound [e.g., fiber glass, mineral fiber, sand, etc.] [2015-01] |
Y10T 428/1317 | . . . | Multilayer [continuous layer] [2015-01] |
Y10T 428/1321 | . . . . | Polymer or resin containing [i.e., natural or synthetic] [2015-01] |
Y10T 428/1324 | . . | Flexible food casing [e.g., sausage type, etc.] [2015-01] |
Y10T 428/1328 | . . | Shrinkable or shrunk [e.g., due to heat, solvent, volatile agent, restraint removal, etc.] [2015-01] |
Y10T 428/1331 | . . . | Single layer [continuous layer] [2015-01] |
Y10T 428/1334 | . . | Nonself-supporting tubular film or bag [e.g., pouch, envelope, packet, etc.] [2015-01] |
Y10T 428/1338 | . . . | Elemental metal containing [2015-01] |
Y10T 428/1341 | . . . | Contains vapor or gas barrier, polymer derived from vinyl chloride or vinylidene chloride, or polymer containing a vinyl alcohol unit [2015-01] |
Y10T 428/1345 | . . . | Single layer [continuous layer] [2015-01] |
Y10T 428/1348 | . . | Cellular material derived from plant or animal source [e.g., wood, cotton, wool, leather, etc.] [2015-01] |
Y10T 428/1352 | . . | Polymer or resin containing [i.e., natural or synthetic] [2015-01] |
Y10T 428/1355 | . . . | Elemental metal containing [e.g., substrate, foil, film, coating, etc.] [2015-01] |
Y10T 428/1359 | . . . . | Three or more layers [continuous layer] [2015-01] |
Y10T 428/1362 | . . . | Textile, fabric, cloth, or pile containing [e.g., web, net, woven, knitted, mesh, nonwoven, matted, etc.] [2015-01] |
Y10T 428/1366 | . . . . | Textile, fabric, cloth, or pile is sandwiched between two distinct layers of material unlike the textile, fabric, cloth, or pile layer [2015-01] |
Y10T 428/1369 | . . . | Fiber or fibers wound around each other or into a self-sustaining shape [e.g., yarn, braid, fibers shaped around a core, etc.] [2015-01] |
Y10T 428/1372 | . . . | Randomly noninterengaged or randomly contacting fibers, filaments, particles, or flakes [2015-01] |
Y10T 428/1376 | . . . | Foam or porous material containing [2015-01] |
Y10T 428/1379 | . . . | Contains vapor or gas barrier, polymer derived from vinyl chloride or vinylidene chloride, or polymer containing a vinyl alcohol unit [2015-01] |
Y10T 428/1383 | . . . . | Vapor or gas barrier, polymer derived from vinyl chloride or vinylidene chloride, or polymer containing a vinyl alcohol unit is sandwiched between layers [continuous layer] [2015-01] |
Y10T 428/1386 | . . . | Natural or synthetic rubber or rubber-like compound containing [2015-01] |
Y10T 428/139 | . . . | Open-ended, self-supporting conduit, cylinder, or tube-type article [2015-01] |
Y10T 428/1393 | . . . . | Multilayer [continuous layer] [2015-01] |
Y10T 428/1397 | . . . | Single layer [continuous layer] [2015-01] |
Y10T 428/14 | . | Layer or component removable to expose adhesive [2015-01] |
Y10T 428/1405 | . . | Capsule or particulate matter containing [e.g., sphere, flake, microballoon, etc.] [2015-01] |
Y10T 428/141 | . . | Bituminous [2015-01] |
Y10T 428/1414 | . . | Ceramic, glass, glasslike, vitreous [2015-01] |
Y10T 428/1419 | . . | Wax containing [2015-01] |
Y10T 428/1424 | . . | Halogen containing compound [2015-01] |
Y10T 428/1429 | . . . | Fluorine [2015-01] |
Y10T 428/1433 | . . . | Coloring agent containing [2015-01] |
Y10T 428/1438 | . . | Metal containing [2015-01] |
Y10T 428/1443 | . . . | Aluminum [2015-01] |
Y10T 428/1448 | . . . | Coloring agent containing [2015-01] |
Y10T 428/1452 | . . | Polymer derived only from ethylenically unsaturated monomer [2015-01] |
Y10T 428/1457 | . . . | Silicon [2015-01] |
Y10T 428/1462 | . . | Polymer derived from material having at least one acrylic or alkacrylic group or the nitrile or amide derivative thereof [e.g., acrylamide, acrylate ester, etc.] [2015-01] |
Y10T 428/1467 | . . | Coloring agent [2015-01] |
Y10T 428/1471 | . . | Protective layer [2015-01] |
Y10T 428/1476 | . . | Release layer [2015-01] |
Y10T 428/1481 | . . | Dissimilar adhesives [2015-01] |
Y10T 428/1486 | . . | Ornamental, decorative, pattern, or indicia [2015-01] |
Y10T 428/149 | . . | Sectional layer removable [2015-01] |
Y10T 428/1495 | . . . | Adhesive is on removable layer [2015-01] |
Y10T 428/15 | . | Sheet, web, or layer weakened to permit separation through thickness [2015-01] |
Y10T 428/16 | . | Two dimensionally sectional layer [2015-01] |
Y10T 428/161 | . . | with frame, casing, or perimeter structure [2015-01] |
Y10T 428/162 | . . | Transparent or translucent layer or section [2015-01] |
Y10T 428/163 | . . | Next to unitary web or sheet of equal or greater extent [2015-01] |
Y10T 428/164 | . . . | Continuous two dimensionally sectional layer [2015-01] |
Y10T 428/166 | . . . . | Glass, ceramic, or metal sections [e.g., floor or wall tile, etc.] [2015-01] |
Y10T 428/167 | . . . . | Cellulosic sections [e.g., parquet floor, etc.] [2015-01] |
Y10T 428/168 | . . . | Nonrectangular [2015-01] |
Y10T 428/169 | . . | Sections connected flexibly with external fastener [2015-01] |
Y10T 428/17 | . | Three or more coplanar interfitted sections with securing means [2015-01] |
Y10T 428/18 | . | Longitudinally sectional layer of three or more sections [2015-01] |
Y10T 428/183 | . . | Next to unitary sheet of equal or greater extent [2015-01] |
Y10T 428/187 | . . . | Continuous sectional layer [2015-01] |
Y10T 428/19 | . | Sheets or webs edge spliced or joined [2015-01] |
Y10T 428/192 | . . | Sheets or webs coplanar [2015-01] |
Y10T 428/193 | . . . | Double faced corrugated sheets or webs connected [2015-01] |
Y10T 428/195 | . . . | Beveled, stepped, or skived in thickness [2015-01] |
Y10T 428/197 | . . . | with noncoplanar reinforcement [2015-01] |
Y10T 428/198 | . . . . | Pile or nap surface sheets connected [2015-01] |
Y10T 428/20 | . | Patched hole or depression [2015-01] |
Y10T 428/21 | . | Circular sheet or circular blank [2015-01] |
Y10T 428/211 | . . | Gear [2015-01] |
Y10T 428/213 | . . | Frictional [2015-01] |
Y10T 428/214 | . . | End closure [2015-01] |
Y10T 428/215 | . . | Seal, gasket, or packing [2015-01] |
Y10T 428/216 | . . | Ornamental, decorative, pattern, or indicia [2015-01] |
Y10T 428/218 | . . | Aperture containing [2015-01] |
Y10T 428/219 | . . | Edge structure [2015-01] |
Y10T 428/22 | . | Nonparticulate element embedded or inlaid in substrate and visible [2015-01] |
Y10T 428/23 | . | Sheet including cover or casing [2015-01] |
Y10T 428/231 | . . | Filled with gas other than air; or under vacuum [2015-01] |
Y10T 428/232 | . . | Encased layer derived from inorganic settable ingredient [2015-01] |
Y10T 428/233 | . . | Foamed or expanded material encased [2015-01] |
Y10T 428/234 | . . | including elements cooperating to form cells [2015-01] |
Y10T 428/236 | . . . | Honeycomb type cells extend perpendicularly to nonthickness layer [2015-01] |
Y10T 428/237 | . . | Noninterengaged fibered material encased [e.g., mat, batt, etc.] [2015-01] |
Y10T 428/238 | . . . | Metal cover or casing [2015-01] |
Y10T 428/239 | . . | Complete cover or casing [2015-01] |
Y10T 428/23907 | . | Pile or nap type surface or component [2015-04] |
Y10T 428/23914 | . . | Interlaminar [2015-04] |
Y10T 428/23921 | . . | With particles [2015-04] |
Y10T 428/23929 | . . | Edge feature or configured or discontinuous surface [2015-04] |
Y10T 428/23936 | . . . | Differential pile length or surface [2015-04] |
Y10T 428/23943 | . . | Flock surface [2015-04] |
Y10T 428/2395 | . . | Nap type surface [2015-04] |
Y10T 428/23957 | . . | Particular shape or structure of pile [2015-04] |
Y10T 428/23964 | . . . | U-, V-, or W-shaped or continuous strand, filamentary material [2015-04] |
Y10T 428/23971 | . . . . | Continuous strand with adhesive bond to backing [2015-04] |
Y10T 428/23979 | . . | Particular backing structure or composition [2015-04] |
Y10T 428/23986 | . . | With coating, impregnation, or bond [2015-04] |
Y10T 428/23993 | . . | Composition of pile or adhesive [2015-04] |
Y10T 428/24 | . | Structurally defined web or sheet [e.g., overall dimension, etc.] [2015-01] |
Y10T 428/24008 | . . | including fastener for attaching to external surface [2015-01] |
Y10T 428/24017 | . . . | Hook or barb [2015-01] |
Y10T 428/24025 | . . | Superposed movable attached layers or components [2015-01] |
Y10T 428/24033 | . . | including stitching and discrete fastener[s], coating or bond [2015-01] |
Y10T 428/24041 | . . . | Discontinuous or differential coating, impregnation, or bond [2015-01] |
Y10T 428/2405 | . . . . | Coating, impregnation, or bond in stitching zone only [2015-01] |
Y10T 428/24058 | . . | including grain, strips, or filamentary elements in respective layers or components in angular relation [2015-01] |
Y10T 428/24066 | . . . | Wood grain [2015-01] |
Y10T 428/24074 | . . . | Strand or strand-portions [2015-01] |
Y10T 428/24083 | . . . . | Nonlinear strands or strand-portions [2015-01] |
Y10T 428/24091 | . . . . | with additional layer[s] [2015-01] |
Y10T 428/24099 | . . . . . | On each side of strands or strand-portions [2015-01] |
Y10T 428/24107 | . . . . . . | including mechanically interengaged strands, strand-portions or strand-like strips [2015-01] |
Y10T 428/24116 | . . . . | Oblique to direction of web [2015-01] |
Y10T 428/24124 | . . . | Fibers [2015-01] |
Y10T 428/24132 | . . | including grain, strips, or filamentary elements in different layers or components parallel [2015-01] |
Y10T 428/2414 | . . | including fringe [2015-01] |
Y10T 428/24149 | . . | Honeycomb-like [2015-01] |
Y10T 428/24157 | . . . | Filled honeycomb cells [e.g., solid substance in cavities, etc.] [2015-01] |
Y10T 428/24165 | . . . | Hexagonally shaped cavities [2015-01] |
Y10T 428/24174 | . . | including sheet or component perpendicular to plane of web or sheet [2015-01] |
Y10T 428/24182 | . . . | Inward from edge of web or sheet [2015-01] |
Y10T 428/2419 | . . | Fold at edge [2015-01] |
Y10T 428/24198 | . . . | Channel-shaped edge component [e.g., binding, etc.] [2015-01] |
Y10T 428/24207 | . . . | with strand[s] or strand-portion[s] between layers [e.g., upholstery trim, etc.] [2015-01] |
Y10T 428/24215 | . . . | Acute or reverse fold of exterior component [2015-01] |
Y10T 428/24223 | . . . . | Embedded in body of web [2015-01] |
Y10T 428/24231 | . . . . | At opposed marginal edges [2015-01] |
Y10T 428/2424 | . . . . . | Annular cover [2015-01] |
Y10T 428/24248 | . . . . . . | One piece [2015-01] |
Y10T 428/24256 | . . . . . . . | Abutted or lapped seam [2015-01] |
Y10T 428/24264 | . . . | Particular fold structure [e.g., beveled, etc.] [2015-01] |
Y10T 428/24273 | . . | including aperture [2015-01] |
Y10T 428/24281 | . . . | Struck out portion type [2015-01] |
Y10T 428/24289 | . . . . | Embedded or interlocked [2015-01] |
Y10T 428/24298 | . . . | Noncircular aperture [e.g., slit, diamond, rectangular, etc.] [2015-01] |
Y10T 428/24306 | . . . . | Diamond or hexagonal [2015-01] |
Y10T 428/24314 | . . . . | Slit or elongated [2015-01] |
Y10T 428/24322 | . . . | Composite web or sheet [2015-01] |
Y10T 428/24331 | . . . . | including nonapertured component [2015-01] |
Y10T 428/24339 | . . . . . | Keyed [2015-01] |
Y10T 428/24347 | . . . . . . | From both sides [2015-01] |
Y10T 428/24355 | . . | Continuous and nonuniform or irregular surface on layer or component [e.g., roofing, etc.] [2015-01] |
Y10T 428/24364 | . . . | with transparent or protective coating [2015-01] |
Y10T 428/24372 | . . . | Particulate matter [2015-01] |
Y10T 428/2438 | . . . . | Coated [2015-01] |
Y10T 428/24388 | . . . . . | Silicon containing coating [2015-01] |
Y10T 428/24397 | . . . . | Carbohydrate [2015-01] |
Y10T 428/24405 | . . . . | Polymer or resin [e.g., natural or synthetic rubber, etc.] [2015-01] |
Y10T 428/24413 | . . . . | Metal or metal compound [2015-01] |
Y10T 428/24421 | . . . . | Silicon containing [2015-01] |
Y10T 428/2443 | . . . . . | Sand, clay, or crushed rock or slate [2015-01] |
Y10T 428/24438 | . . . | Artificial wood or leather grain surface [2015-01] |
Y10T 428/24446 | . . . | Wrinkled, creased, crinkled or creped [2015-01] |
Y10T 428/24455 | . . . . | Paper [2015-01] |
Y10T 428/24463 | . . . . . | Plural paper components [2015-01] |
Y10T 428/24471 | . . . | Crackled, crazed or slit [2015-01] |
Y10T 428/24479 | . . | including variation in thickness [2015-01] |
Y10T 428/24488 | . . . | Differential nonuniformity at margin [2015-01] |
Y10T 428/24496 | . . . | Foamed or cellular component [2015-01] |
Y10T 428/24504 | . . . . | Component comprises a polymer [e.g., rubber, etc.] [2015-01] |
Y10T 428/24512 | . . . . . | Polyurethane [2015-01] |
Y10T 428/24521 | . . . | with component conforming to contour of nonplanar surface [2015-01] |
Y10T 428/24529 | . . . . | and conforming component on an opposite nonplanar surface [2015-01] |
Y10T 428/24537 | . . . . | Parallel ribs and/or grooves [2015-01] |
Y10T 428/24545 | . . . . | Containing metal or metal compound [2015-01] |
Y10T 428/24554 | . . . . | including cellulosic or natural rubber component [2015-01] |
Y10T 428/24562 | . . . | Interlaminar spaces [2015-01] |
Y10T 428/2457 | . . . | Parallel ribs and/or grooves [2015-01] |
Y10T 428/24579 | . . . . | with particulate matter [2015-01] |
Y10T 428/24587 | . . . . | Oblique to longitudinal axis of web or sheet [2015-01] |
Y10T 428/24595 | . . . | and varying density [2015-01] |
Y10T 428/24603 | . . . . | Fiber containing component [2015-01] |
Y10T 428/24612 | . . . | Composite web or sheet [2015-01] |
Y10T 428/2462 | . . . . | with partial filling of valleys on outer surface [2015-01] |
Y10T 428/24628 | . . | Nonplanar uniform thickness material [2015-01] |
Y10T 428/24636 | . . . | Embodying mechanically interengaged strand[s], strand-portion[s] or strand-like strip[s] [e.g., weave, knit, etc.] [2015-01] |
Y10T 428/24645 | . . . . | with folds in parallel planes [2015-01] |
Y10T 428/24653 | . . . | Differential nonplanarity at margin [2015-01] |
Y10T 428/24661 | . . . | Forming, or cooperating to form cells [2015-01] |
Y10T 428/24669 | . . . | Aligned or parallel nonplanarities [2015-01] |
Y10T 428/24678 | . . . . | Waffle-form [2015-01] |
Y10T 428/24686 | . . . . | Pleats or otherwise parallel adjacent folds [2015-01] |
Y10T 428/24694 | . . . . | Parallel corrugations [2015-01] |
Y10T 428/24702 | . . . . . | with locally deformed crests or intersecting series of corrugations [2015-01] |
Y10T 428/24711 | . . . . . | Plural corrugated components [2015-01] |
Y10T 428/24719 | . . . . . . | with corrugations of respective components intersecting in plane projection [2015-01] |
Y10T 428/24727 | . . . . . . | with planar component [2015-01] |
Y10T 428/24736 | . . . | Ornamental design or indicia [2015-01] |
Y10T 428/24744 | . . | Longitudinal or transverse tubular cavity or cell [2015-01] |
Y10T 428/24752 | . . | Laterally noncoextensive components [2015-01] |
Y10T 428/2476 | . . . | Fabric, cloth or textile component [2015-01] |
Y10T 428/24769 | . . . | Cellulosic [2015-01] |
Y10T 428/24777 | . . | Edge feature [2015-01] |
Y10T 428/24785 | . . . | including layer embodying mechanically interengaged strands, strand portions or strand-like strips [e.g., weave, knit, etc.] [2015-01] |
Y10T 428/24793 | . . . | Comprising discontinuous or differential impregnation or bond [2015-01] |
Y10T 428/24802 | . . | Discontinuous or differential coating, impregnation or bond [e.g., artwork, printing, retouched photograph, etc.] [2015-01] |
Y10T 428/2481 | . . . | including layer of mechanically interengaged strands, strand-portions or strand-like strips [2015-01] |
Y10T 428/24818 | . . . . | Knitted, with particular or differential bond sites or intersections [2015-01] |
Y10T 428/24826 | . . . | Spot bonds connect components [2015-01] |
Y10T 428/24835 | . . . | including developable image or soluble portion in coating or impregnation [e.g., safety paper, etc.] [2015-01] |
Y10T 428/24843 | . . . | with heat sealable or heat releasable adhesive layer [2015-01] |
Y10T 428/24851 | . . . | Intermediate layer is discontinuous or differential [2015-01] |
Y10T 428/2486 | . . . . | with outer strippable or release layer [2015-01] |
Y10T 428/24868 | . . . . | Translucent outer layer [2015-01] |
Y10T 428/24876 | . . . . . | Intermediate layer contains particulate material [e.g., pigment, etc.] [2015-01] |
Y10T 428/24884 | . . . . . | Translucent layer comprises natural oil, wax, resin, gum, glue, gelatin [2015-01] |
Y10T 428/24893 | . . . | including particulate material [2015-01] |
Y10T 428/24901 | . . . . | including coloring matter [2015-01] |
Y10T 428/24909 | . . . . | Free metal or mineral containing [2015-01] |
Y10T 428/24917 | . . . | including metal layer [2015-01] |
Y10T 428/24926 | . . . | including ceramic, glass, porcelain or quartz layer [2015-01] |
Y10T 428/24934 | . . . | including paper layer [2015-01] |
Y10T 428/24942 | . . | including components having same physical characteristic in differing degree [2015-01] |
Y10T 428/2495 | . . . | Thickness [relative or absolute] [2015-01] |
Y10T 428/24959 | . . . . | of adhesive layers [2015-01] |
Y10T 428/24967 | . . . . | Absolute thicknesses specified [2015-01] |
Y10T 428/24975 | . . . . . | No layer or component greater than 5 mils thick [2015-01] |
Y10T 428/24983 | . . . | Hardness [2015-01] |
Y10T 428/24992 | . . . | Density or compression of components [2015-01] |
Y10T 428/249921 | . | Web or sheet containing structurally defined element or component [2015-04] |
Y10T 428/249922 | . . | Embodying intertwined or helical component[s] [2015-04] |
Y10T 428/249923 | . . | Including interlaminar mechanical fastener [2015-04] |
Y10T 428/249924 | . . | Noninterengaged fiber-containing paper-free web or sheet which is not of specified porosity [2015-04] |
Y10T 428/249925 | . . . | Fiber-containing wood product [e.g., hardboard, lumber, or wood board, etc.] [2015-04] |
Y10T 428/249926 | . . . | Including paper layer [2015-04] |
Y10T 428/249927 | . . . | Fiber embedded in a metal matrix [2015-04] |
Y10T 428/249928 | . . . | Fiber embedded in a ceramic, glass, or carbon matrix [2015-04] |
Y10T 428/249929 | . . . . | Fibers are aligned substantially parallel [2015-04] |
Y10T 428/24993 | . . . . . | Fiber is precoated [2015-04] |
Y10T 428/249931 | . . . . | Free metal or alloy fiber [2015-04] |
Y10T 428/249932 | . . . | Fiber embedded in a layer derived from a water-settable material [e.g., cement, gypsum, etc.] [2015-04] |
Y10T 428/249933 | . . . | Fiber embedded in or on the surface of a natural or synthetic rubber matrix [2015-04] |
Y10T 428/249934 | . . . . | Fibers are aligned substantially parallel [2015-04] |
Y10T 428/249935 | . . . . . | Fiber is nonlinear [e.g., crimped, sinusoidal, etc.] [2015-04] |
Y10T 428/249936 | . . . . . | Fiber is precoated [2015-04] |
Y10T 428/249937 | . . . . | Fiber is precoated [2015-04] |
Y10T 428/249938 | . . . . | Composite or conjugate fiber [e.g., fiber contains more than one chemically different material in monofilament or multifilament form, etc.] [2015-04] |
Y10T 428/249939 | . . . . | Two or more layers [2015-04] |
Y10T 428/24994 | . . . | Fiber embedded in or on the surface of a polymeric matrix [2015-04] |
Y10T 428/249941 | . . . . | Fiber is on the surface of a polymeric matrix having no embedded portion [2015-04] |
Y10T 428/249942 | . . . . | Fibers are aligned substantially parallel [2015-04] |
Y10T 428/249943 | . . . . . | Fiber is nonlinear [e.g., crimped, sinusoidal, etc.] [2015-04] |
Y10T 428/249944 | . . . . . | Fiber is precoated [2015-04] |
Y10T 428/249945 | . . . . . | Carbon or carbonaceous fiber [2015-04] |
Y10T 428/249946 | . . . . . | Glass fiber [2015-04] |
Y10T 428/249947 | . . . . . | Polymeric fiber [2015-04] |
Y10T 428/249948 | . . . . | Fiber is precoated [2015-04] |
Y10T 428/249949 | . . . . | Two or more chemically different fibers [2015-04] |
Y10T 428/24995 | . . . . | Two or more layers [2015-04] |
Y10T 428/249951 | . . . . . | Including a free metal or alloy constituent [2015-04] |
Y10T 428/249952 | . . . . . | At least one thermosetting synthetic polymeric material layer [2015-04] |
Y10T 428/249953 | . . | Composite having voids in a component [e.g., porous, cellular, etc.] [2015-04] |
Y10T 428/249954 | . . . | With chemically effective material or specified gas other than air, N, or carbon dioxide in void-containing component [2015-04] |
Y10T 428/249955 | . . . | Void-containing component partially impregnated with adjacent component [2015-04] |
Y10T 428/249956 | . . . . | Void-containing component is inorganic [2015-04] |
Y10T 428/249957 | . . . . . | Inorganic impregnant [2015-04] |
Y10T 428/249958 | . . . . | Void-containing component is synthetic resin or natural rubbers [2015-04] |
Y10T 428/249959 | . . . . | Void-containing component is wood or paper [2015-04] |
Y10T 428/24996 | . . . | With internal element bridging layers, nonplanar interface between layers, or intermediate layer of commingled adjacent foam layers [2015-04] |
Y10T 428/249961 | . . . | With gradual property change within a component [2015-04] |
Y10T 428/249962 | . . . | Void-containing component has a continuous matrix of fibers only [e.g., porous paper, etc.] [2015-04] |
Y10T 428/249963 | . . . . | And a force disintegratable component [e.g., stencil sheet, etc.] [2015-04] |
Y10T 428/249964 | . . . . | Fibers of defined composition [2015-04] |
Y10T 428/249965 | . . . . . | Cellulosic [2015-04] |
Y10T 428/249966 | . . . . . . | Plural cellulosic components [2015-04] |
Y10T 428/249967 | . . . | Inorganic matrix in void-containing component [2015-04] |
Y10T 428/249968 | . . . . | Of hydraulic-setting material [2015-04] |
Y10T 428/249969 | . . . . | Of silicon-containing material [e.g., glass, etc.] [2015-04] |
Y10T 428/24997 | . . . . | Of metal-containing material [2015-04] |
Y10T 428/249971 | . . . | Preformed hollow element-containing [2015-04] |
Y10T 428/249972 | . . . . | Resin or rubber element [2015-04] |
Y10T 428/249973 | . . . . | Mineral element [2015-04] |
Y10T 428/249974 | . . . . | Metal- or silicon-containing element [2015-04] |
Y10T 428/249975 | . . . | Void shape specified [e.g., crushed, flat, round, etc.] [2015-04] |
Y10T 428/249976 | . . . | Voids specified as closed [2015-04] |
Y10T 428/249977 | . . . . | Specified thickness of void-containing component [absolute or relative], numerical cell dimension or density [2015-04] |
Y10T 428/249978 | . . . | Voids specified as micro [2015-04] |
Y10T 428/249979 | . . . . | Specified thickness of void-containing component [absolute or relative] or numerical cell dimension [2015-04] |
Y10T 428/24998 | . . . . | Composite has more than two layers [2015-04] |
Y10T 428/249981 | . . . | Plural void-containing components [2015-04] |
Y10T 428/249982 | . . . | With component specified as adhesive or bonding agent [2015-04] |
Y10T 428/249983 | . . . . | As outermost component [2015-04] |
Y10T 428/249984 | . . . . | Adhesive or bonding component contains voids [2015-04] |
Y10T 428/249985 | . . . . | Composition of adhesive or bonding component specified [2015-04] |
Y10T 428/249986 | . . . | Void-containing component contains also a solid fiber or solid particle [2015-04] |
Y10T 428/249987 | . . . | With nonvoid component of specified composition [2015-04] |
Y10T 428/249988 | . . . . | Of about the same composition as, and adjacent to, the void-containing component [2015-04] |
Y10T 428/249989 | . . . . . | Integrally formed skin [2015-04] |
Y10T 428/24999 | . . . . | Inorganic [2015-04] |
Y10T 428/249991 | . . . . | Synthetic resin or natural rubbers [2015-04] |
Y10T 428/249992 | . . . . . | Linear or thermoplastic [2015-04] |
Y10T 428/249993 | . . . . . . | Hydrocarbon polymer [2015-04] |
Y10T 428/249994 | . . | Composite having a component wherein a constituent is liquid or is contained within preformed walls [e.g., impregnant-filled, previously void containing component, etc.] [2015-04] |
Y10T 428/249995 | . . . | Constituent is in liquid form [2015-04] |
Y10T 428/249996 | . . . . | Ink in pores [2015-04] |
Y10T 428/249997 | . . . . | Encapsulated liquid [2015-04] |
Y10T 428/249998 | . . . | Indefinite plurality of similar impregnated thin sheets [e.g., "decorative laminate" type, etc.] [2015-04] |
Y10T 428/249999 | . . . | Differentially filled foam, filled plural layers, or filled layer with coat of filling material [2015-04] |
Y10T 428/25 | . | Web or sheet containing structurally defined element or component and including a second component containing structurally defined particles [2015-01] |
Y10T 428/251 | . . | Mica [2015-01] |
Y10T 428/252 | . . | Glass or ceramic [i.e., fired or glazed clay, cement, etc.] [porcelain, quartz, etc.] [2015-01] |
Y10T 428/253 | . . | Cellulosic [e.g., wood, paper, cork, rayon, etc.] [2015-01] |
Y10T 428/254 | . . | Polymeric or resinous material [2015-01] |
Y10T 428/256 | . . | Heavy metal or aluminum or compound thereof [2015-01] |
Y10T 428/257 | . . . | Iron oxide or aluminum oxide [2015-01] |
Y10T 428/258 | . . | Alkali metal or alkaline earth metal or compound thereof [2015-01] |
Y10T 428/259 | . . | Silicic material [2015-01] |
Y10T 428/26 | . | Web or sheet containing structurally defined element or component, the element or component having a specified physical dimension [2015-01] |
Y10T 428/261 | . . | In terms of molecular thickness or light wave length [2015-01] |
Y10T 428/263 | . . | Coating layer not in excess of 5 mils thick or equivalent [2015-01] |
Y10T 428/264 | . . . | Up to 3 mils [2015-01] |
Y10T 428/265 | . . . . | 1 mil or less [2015-01] |
Y10T 428/266 | . . | of base or substrate [2015-01] |
Y10T 428/268 | . . | Monolayer with structurally defined element [2015-01] |
Y10T 428/269 | . . | including synthetic resin or polymer layer or component [2015-01] |
Y10T 428/27 | . | Web or sheet containing structurally defined element or component, the element or component having a specified weight per unit area [e.g., gms/sq cm, lbs/sq ft, etc.] [2015-01] |
Y10T 428/273 | . . | of coating [2015-01] |
Y10T 428/277 | . . . | Cellulosic substrate [2015-01] |
Y10T 428/28 | . | Web or sheet containing structurally defined element or component and having an adhesive outermost layer [2015-01] |
Y10T 428/2804 | . . | Next to metal [2015-01] |
Y10T 428/2809 | . . | including irradiated or wave energy treated component [2015-01] |
Y10T 428/2813 | . . | Heat or solvent activated or sealable [2015-01] |
Y10T 428/2817 | . . . | Heat sealable [2015-01] |
Y10T 428/2822 | . . . . | Wax containing [2015-01] |
Y10T 428/2826 | . . . . | Synthetic resin or polymer [2015-01] |
Y10T 428/283 | . . . | Water activated [2015-01] |
Y10T 428/2835 | . . | including moisture or waterproof component [2015-01] |
Y10T 428/2839 | . . | with release or antistick coating [2015-01] |
Y10T 428/2843 | . . | including a primer layer [2015-01] |
Y10T 428/2848 | . . | Three or more layers [2015-01] |
Y10T 428/2852 | . . | Adhesive compositions [2015-01] |
Y10T 428/2857 | . . . | including metal or compound thereof or natural rubber [2015-01] |
Y10T 428/2861 | . . . | having readily strippable combined with readily readhearable properties [e.g., stick-ons, etc.] [2015-01] |
Y10T 428/2865 | . . . | including monomer or polymer of carbohydrate [e.g., starch, dextrin, etc.] Or protein [e.g., casein, animal protein, etc.] Or derivative thereof [2015-01] |
Y10T 428/287 | . . . | including epoxy group or epoxy polymer [2015-01] |
Y10T 428/2874 | . . . | including aldehyde or ketone condensation polymer [e.g., urea formaldehyde polymer, melamine formaldehyde polymer, etc.] [2015-01] |
Y10T 428/2878 | . . . | including addition polymer from unsaturated monomer [2015-01] |
Y10T 428/2883 | . . . . | including addition polymer of diene monomer [e.g., SBR, SIS, etc.] [2015-01] |
Y10T 428/2887 | . . . . | including nitrogen containing polymer [e.g., polyacrylonitrile, polymethacrylonitrile, etc.] [2015-01] |
Y10T 428/2891 | . . . . | including addition polymer from alpha-beta unsaturated carboxylic acid [e.g., acrylic acid, methacrylic acid, etc.] Or derivative thereof [2015-01] |
Y10T 428/2896 | . . . | including nitrogen containing condensation polymer [e.g., polyurethane, polyisocyanate, etc.] [2015-01] |
Y10T 428/29 | . | Coated or structually defined flake, particle, cell, strand, strand portion, rod, filament, macroscopic fiber or mass thereof [2015-01] |
Y10T 428/2902 | . . | Channel shape [2015-01] |
Y10T 428/2904 | . . | Staple length fiber [2015-01] |
Y10T 428/2905 | . . . | Plural and with bonded intersections only [2015-01] |
Y10T 428/2907 | . . . | with coating or impregnation [2015-01] |
Y10T 428/2909 | . . . | Nonlinear [e.g., crimped, coiled, etc.] [2015-01] |
Y10T 428/2911 | . . | Mica flake [2015-01] |
Y10T 428/2913 | . . | Rod, strand, filament or fiber [2015-01] |
Y10T 428/2915 | . . . | including textile, cloth or fabric [2015-01] |
Y10T 428/2916 | . . . | including boron or compound thereof [not as steel] [2015-01] |
Y10T 428/2918 | . . . | including free carbon or carbide or therewith [not as steel] [2015-01] |
Y10T 428/292 | . . . . | In coating or impregnation [2015-01] |
Y10T 428/2922 | . . . | Nonlinear [e.g., crimped, coiled, etc.] [2015-01] |
Y10T 428/2924 | . . . . | Composite [2015-01] |
Y10T 428/2925 | . . . . | Helical or coiled [2015-01] |
Y10T 428/2927 | . . . | including structurally defined particulate matter [2015-01] |
Y10T 428/2929 | . . . | Bicomponent, conjugate, composite or collateral fibers or filaments [i.e., coextruded sheath-core or side-by-side type] [2015-01] |
Y10T 428/2931 | . . . . | Fibers or filaments nonconcentric [e.g., side-by-side or eccentric, etc.] [2015-01] |
Y10T 428/2933 | . . . | Coated or with bond, impregnation or core [2015-01] |
Y10T 428/2935 | . . . . | Discontinuous or tubular or cellular core [2015-01] |
Y10T 428/2936 | . . . . | Wound or wrapped core or coating [i.e., spiral or helical] [2015-01] |
Y10T 428/2938 | . . . . | Coating on discrete and individual rods, strands or filaments [2015-01] |
Y10T 428/294 | . . . . | including metal or compound thereof [excluding glass, ceramic and asbestos] [2015-01] |
Y10T 428/2942 | . . . . . | Plural coatings [2015-01] |
Y10T 428/2944 | . . . . . . | Free metal in coating [2015-01] |
Y10T 428/2945 | . . . . . . | Natural rubber in coating [2015-01] |
Y10T 428/2947 | . . . . . . | Synthetic resin or polymer in plural coatings, each of different type [2015-01] |
Y10T 428/2949 | . . . . . . | Glass, ceramic or metal oxide in coating [2015-01] |
Y10T 428/2951 | . . . . . | Metal with weld modifying or stabilizing coating [e.g., flux, slag, producer, etc.] [2015-01] |
Y10T 428/2953 | . . . . . . | Titanium compound in coating [2015-01] |
Y10T 428/2955 | . . . . . . | Silicic material in coating [2015-01] |
Y10T 428/2956 | . . . . . | Glass or silicic fiber or filament with metal coating [2015-01] |
Y10T 428/2958 | . . . . . | Metal or metal compound in coating [2015-01] |
Y10T 428/296 | . . . . . | Rubber, cellulosic or silicic material in coating [2015-01] |
Y10T 428/2962 | . . . . | Silane, silicone or siloxane in coating [2015-01] |
Y10T 428/2964 | . . . . | Artificial fiber or filament [2015-01] |
Y10T 428/2965 | . . . . . | Cellulosic [2015-01] |
Y10T 428/2967 | . . . . . | Synthetic resin or polymer [2015-01] |
Y10T 428/2969 | . . . . . . | Polyamide, polyimide or polyester [2015-01] |
Y10T 428/2971 | . . . . | Impregnation [2015-01] |
Y10T 428/2973 | . . . | Particular cross section [2015-01] |
Y10T 428/2975 | . . . . | Tubular or cellular [2015-01] |
Y10T 428/2976 | . . . . | Longitudinally varying [2015-01] |
Y10T 428/2978 | . . . . | Surface characteristic [2015-01] |
Y10T 428/298 | . . . | Physical dimension [2015-01] |
Y10T 428/2982 | . . | Particulate matter [e.g., sphere, flake, etc.] [2015-01] |
Y10T 428/2984 | . . . | Microcapsule with fluid core [includes liposome] [2015-01] |
Y10T 428/2985 | . . . . | Solid-walled microcapsule from synthetic polymer [2015-01] |
Y10T 428/2987 | . . . . . | Addition polymer from unsaturated monomers only [2015-01] |
Y10T 428/2989 | . . . | Microcapsule with solid core [includes liposome] [2015-01] |
Y10T 428/2991 | . . . | Coated [2015-01] |
Y10T 428/2993 | . . . . | Silicic or refractory material containing [e.g., tungsten oxide, glass, cement, etc.] [2015-01] |
Y10T 428/2995 | . . . . . | Silane, siloxane or silicone coating [2015-01] |
Y10T 428/2996 | . . . . . | Glass particles or spheres [2015-01] |
Y10T 428/2998 | . . . . | including synthetic resin or polymer [2015-01] |
Y10T 428/30 | . | Self-sustaining carbon mass or layer with impregnant or other layer [2015-01] |
Y10T 428/31 | . | Surface property or characteristic of web, sheet or block [2015-01] |
Y10T 428/315 | . . | Surface modified glass [e.g., tempered, strengthened, etc.] [2015-01] |
Y10T 428/31504 | . | Composite [nonstructural laminate] [2015-04] |
Y10T 428/31507 | . . | Of polycarbonate [2015-04] |
Y10T 428/31511 | . . | Of epoxy ether [2015-04] |
Y10T 428/31515 | . . . | As intermediate layer [2015-04] |
Y10T 428/31518 | . . . . | Next to glass or quartz [2015-04] |
Y10T 428/31522 | . . . . | Next to metal [2015-04] |
Y10T 428/31525 | . . . | Next to glass or quartz [2015-04] |
Y10T 428/31529 | . . . | Next to metal [2015-04] |
Y10T 428/31533 | . . | Of polythioether [2015-04] |
Y10T 428/31536 | . . | Including interfacial reaction product of adjacent layers [2015-04] |
Y10T 428/3154 | . . | Of fluorinated addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31544 | . . . | Addition polymer is perhalogenated [2015-04] |
Y10T 428/31547 | . . | Of polyisocyanurate [2015-04] |
Y10T 428/31551 | . . | Of polyamidoester [polyurethane, polyisocyanate, polycarbamate, etc.] [2015-04] |
Y10T 428/31554 | . . . | Next to second layer of polyamidoester [2015-04] |
Y10T 428/31558 | . . . | Next to animal skin or membrane [2015-04] |
Y10T 428/31562 | . . . | Next to polyamide [nylon, etc.] [2015-04] |
Y10T 428/31565 | . . . | Next to polyester [polyethylene terephthalate, etc.] [2015-04] |
Y10T 428/31569 | . . . | Next to natural rubber [2015-04] |
Y10T 428/31573 | . . . | Next to addition polymer of ethylenically unsaturated monomer [2015-04] |
Y10T 428/31576 | . . . . | Ester monomer type [polyvinylacetate, etc.] [2015-04] |
Y10T 428/3158 | . . . . | Halide monomer type [polyvinyl chloride, etc.] [2015-04] |
Y10T 428/31583 | . . . . | Nitrile monomer type [polyacrylonitrile, etc.] [2015-04] |
Y10T 428/31587 | . . . . | Hydrocarbon polymer [polyethylene, polybutadiene, etc.] [2015-04] |
Y10T 428/31591 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31594 | . . . | Next to aldehyde or ketone condensation product [phenol-aldehyde, etc.] [2015-04] |
Y10T 428/31598 | . . . | Next to silicon-containing [silicone, cement, etc.] layer [2015-04] |
Y10T 428/31601 | . . . . | Quartz or glass [2015-04] |
Y10T 428/31605 | . . . | Next to free metal [2015-04] |
Y10T 428/31609 | . . . | Particulate metal or metal compound-containing [2015-04] |
Y10T 428/31612 | . . . . | As silicone, silane or siloxane [2015-04] |
Y10T 428/31616 | . . . | Next to polyester [e.g., alkyd] [2015-04] |
Y10T 428/3162 | . . . . | Cross-linked polyester [e.g., glycerol maleate-styrene, etc.] [2015-04] |
Y10T 428/31623 | . . . | Next to polyamide or polyimide [2015-04] |
Y10T 428/31627 | . . . | Next to aldehyde or ketone condensation product [2015-04] |
Y10T 428/3163 | . . . . | Next to acetal of polymerized unsaturated alcohol [e.g., formal butyral, etc.] [2015-04] |
Y10T 428/31634 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31638 | . . . . | Cellulosic ester [2015-04] |
Y10T 428/31641 | . . . | Next to natural rubber, gum, oil, rosin, wax, bituminous or tarry residue [2015-04] |
Y10T 428/31645 | . . . | Next to addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31649 | . . . . | Ester, halide or nitrile of addition polymer [2015-04] |
Y10T 428/31652 | . . | Of asbestos [2015-04] |
Y10T 428/31656 | . . . | With metal layer [2015-04] |
Y10T 428/31659 | . . . | With cellulosic layer [2015-04] |
Y10T 428/31663 | . . . | As siloxane, silicone or silane [2015-04] |
Y10T 428/31667 | . . . | Next to addition polymer from unsaturated monomers, or aldehyde or ketone condensation product [2015-04] |
Y10T 428/3167 | . . | Of cork [2015-04] |
Y10T 428/31674 | . . . | Including natural oil or gum or rosin [e.g., linoleum, etc.] [2015-04] |
Y10T 428/31678 | . . | Of metal [2015-04] |
Y10T 428/31681 | . . . | Next to polyester, polyamide or polyimide [e.g., alkyd, glue, or nylon, etc.] [2015-04] |
Y10T 428/31685 | . . . . | Natural source polyamide [e.g., casein, gelatin, etc.] [2015-04] |
Y10T 428/31688 | . . . | Next to aldehyde or ketone condensation product [2015-04] |
Y10T 428/31692 | . . . | Next to addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31696 | . . . . | Including polyene monomers [e.g., butadiene, etc.] [2015-04] |
Y10T 428/31699 | . . . . | Ester, halide or nitrile of addition polymer [2015-04] |
Y10T 428/31703 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31707 | . . . | Next to natural rubber [2015-04] |
Y10T 428/3171 | . . . . | With natural rubber next to second layer of natural rubber [2015-04] |
Y10T 428/31714 | . . . | Next to natural gum, natural oil, rosin, lac or wax [2015-04] |
Y10T 428/31717 | . . . | Next to bituminous or tarry residue [2015-04] |
Y10T 428/31721 | . . | Of polyimide [2015-04] |
Y10T 428/31725 | . . | Of polyamide [2015-04] |
Y10T 428/31728 | . . . | Next to second layer of polyamide [2015-04] |
Y10T 428/31732 | . . . . | At least one layer is nylon type [2015-04] |
Y10T 428/31736 | . . . | Next to polyester [2015-04] |
Y10T 428/31739 | . . . | Nylon type [2015-04] |
Y10T 428/31743 | . . . . | Next to addition polymer from unsaturated monomer[s] [2015-04] |
Y10T 428/31746 | . . . . . | Polymer of monoethylenically unsaturated hydrocarbon [2015-04] |
Y10T 428/3175 | . . . | Next to addition polymer from unsaturated monomer[s] [2015-04] |
Y10T 428/31754 | . . . . | Natural source-type polyamide [2015-04] |
Y10T 428/31757 | . . . . | Polymer of monoethylenically unsaturated hydrocarbon [2015-04] |
Y10T 428/31761 | . . . | Next to aldehyde or ketone condensation product [2015-04] |
Y10T 428/31765 | . . . | Inorganic-containing or next to inorganic-containing [2015-04] |
Y10T 428/31768 | . . . | Natural source-type polyamide [e.g., casein, gelatin, etc.] [2015-04] |
Y10T 428/31772 | . . . . | Next to cellulosic [2015-04] |
Y10T 428/31775 | . . . . . | Paper [2015-04] |
Y10T 428/31779 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31783 | . . . . | Paper or wood [2015-04] |
Y10T 428/31786 | . . | Of polyester [e.g., alkyd, etc.] [2015-04] |
Y10T 428/3179 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31794 | . . . | Of cross-linked polyester [2015-04] |
Y10T 428/31797 | . . . | Next to addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31801 | . . | Of wax or waxy material [2015-04] |
Y10T 428/31804 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31808 | . . . . | Cellulosic is paper [2015-04] |
Y10T 428/31812 | . . . . . | Glassine paper [2015-04] |
Y10T 428/31815 | . . | Of bituminous or tarry residue [2015-04] |
Y10T 428/31819 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31823 | . . . . | Paper [2015-04] |
Y10T 428/31826 | . . | Of natural rubber [2015-04] |
Y10T 428/3183 | . . . | Next to second layer of natural rubber [2015-04] |
Y10T 428/31833 | . . . | Next to aldehyde or ketone condensation product or addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31837 | . . . . | Including polyene monomers [2015-04] |
Y10T 428/31841 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31844 | . . | Of natural gum, rosin, natural oil or lac [2015-04] |
Y10T 428/31848 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31851 | . . . . | Natural oil [2015-04] |
Y10T 428/31855 | . . | Of addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31859 | . . . | Next to an aldehyde or ketone condensation product [2015-04] |
Y10T 428/31862 | . . . . | Melamine-aldehyde [2015-04] |
Y10T 428/31866 | . . . . . | Impregnated or coated cellulosic material [2015-04] |
Y10T 428/3187 | . . . . | Amide-aldehyde [2015-04] |
Y10T 428/31873 | . . . . . | Urea or modified urea-aldehyde [2015-04] |
Y10T 428/31877 | . . . . | Phenol-aldehyde [2015-04] |
Y10T 428/3188 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31884 | . . . . | Regenerated or modified cellulose [2015-04] |
Y10T 428/31888 | . . . . . | Addition polymer of hydrocarbon[s] only [2015-04] |
Y10T 428/31891 | . . . . . | Where addition polymer is an ester or halide [2015-04] |
Y10T 428/31895 | . . . . | Paper or wood [2015-04] |
Y10T 428/31899 | . . . . . | Addition polymer of hydrocarbon[s] only [2015-04] |
Y10T 428/31902 | . . . . . . | Monoethylenically unsaturated [2015-04] |
Y10T 428/31906 | . . . . . | Ester, halide or nitrile of addition polymer [2015-04] |
Y10T 428/31909 | . . . | Next to second addition polymer from unsaturated monomers [2015-04] |
Y10T 428/31913 | . . . . | Monoolefin polymer [2015-04] |
Y10T 428/31917 | . . . . . | Next to polyene polymer [2015-04] |
Y10T 428/3192 | . . . . . | Next to vinyl or vinylidene chloride polymer [2015-04] |
Y10T 428/31924 | . . . . | Including polyene monomers [2015-04] |
Y10T 428/31928 | . . . . | Ester, halide or nitrile of addition polymer [2015-04] |
Y10T 428/31931 | . . . | Polyene monomer-containing [2015-04] |
Y10T 428/31935 | . . . | Ester, halide or nitrile of addition polymer [2015-04] |
Y10T 428/31938 | . . . | Polymer of monoethylenically unsaturated hydrocarbon [2015-04] |
Y10T 428/31942 | . . | Of aldehyde or ketone condensation product [2015-04] |
Y10T 428/31946 | . . . | Next to second aldehyde or ketone condensation product [2015-04] |
Y10T 428/31949 | . . . | Next to cellulosic [2015-04] |
Y10T 428/31953 | . . . . | Modified or regenerated cellulose [2015-04] |
Y10T 428/31957 | . . . . | Wood [2015-04] |
Y10T 428/3196 | . . . . . | Phenoplast [2015-04] |
Y10T 428/31964 | . . . . | Paper [2015-04] |
Y10T 428/31967 | . . . . . | Phenoplast [2015-04] |
Y10T 428/31971 | . . | Of carbohydrate [2015-04] |
Y10T 428/31975 | . . . | Of cellulosic next to another carbohydrate [2015-04] |
Y10T 428/31978 | . . . . | Cellulosic next to another cellulosic [2015-04] |
Y10T 428/31982 | . . . . . | Wood or paper [2015-04] |
Y10T 428/31986 | . . . . . | Regenerated or modified [2015-04] |
Y10T 428/31989 | . . . | Of wood [2015-04] |
Y10T 428/31993 | . . . | Of paper [2015-04] |
Y10T 428/31996 | . . . . | Next to layer of metal salt [e.g., plasterboard, etc.] [2015-04] |
Y10T 428/32 | . | Composite [nonstructural laminate] of inorganic material having metal-compound-containing layer and having defined magnetic layer [2015-01] |
Y10T 428/325 | . . | Magnetic layer next to second metal compound-containing layer [2015-01] |
Y10T 428/4935 | . | Impregnated naturally solid product [e.g., leather, stone, etc.] [2015-04] |
Y10T 428/662 | . . | Wood timber product [e.g., piling, post, veneer, etc.] [2015-04] |
Y10T 428/8305 | . | Miscellaneous [e.g., treated surfaces, etc.] [2015-04] |
Former US Class 436 Series [2015-01] |
Y10T 436/00 | Chemistry: analytical and immunological testing [2015-01] |
Y10T 436/10 | . | Composition for standardization, calibration, simulation, stabilization, preparation or preservation; processes of use in preparation for chemical testing [2015-01] |
Y10T 436/100833 | . . | Simulative of a gaseous composition [2015-01] |
Y10T 436/101666 | . . | Particle count or volume standard or control [e.g., platelet count standards, etc.] [2015-01] |
Y10T 436/102499 | . . | Blood gas standard or control [2015-01] |
Y10T 436/103332 | . . | Bilirubin or uric acid standard or control [2015-01] |
Y10T 436/104165 | . . | Lipid, cholesterol, or triglyceride standard or control [2015-01] |
Y10T 436/104998 | . . | Glucose, ketone, nitrate standard or control [2015-01] |
Y10T 436/105831 | . . | Protein or peptide standard or control [e.g., hemoglobin, etc.] [2015-01] |
Y10T 436/106664 | . . | Blood serum or blood plasma standard or control [2015-01] |
Y10T 436/107497 | . . | Preparation composition [e.g., lysing or precipitation, etc.] [2015-01] |
Y10T 436/108331 | . . | Preservative, buffer, anticoagulant or diluent [2015-01] |
Y10T 436/109163 | . . | Inorganic standards or controls [2015-01] |
Y10T 436/11 | . | Automated chemical analysis [2015-01] |
Y10T 436/110833 | . . | Utilizing a moving indicator strip or tape [2015-01] |
Y10T 436/111666 | . . | Utilizing a centrifuge or compartmented rotor [2015-01] |
Y10T 436/112499 | . . | with sample on test slide [2015-01] |
Y10T 436/113332 | . . | with conveyance of sample along a test line in a container or rack [2015-01] |
Y10T 436/114165 | . . . | with step of insertion or removal from test line [2015-01] |
Y10T 436/114998 | . . . | with treatment or replacement of aspirator element [e.g., cleaning, etc.] [2015-01] |
Y10T 436/115831 | . . | Condition or time responsive [2015-01] |
Y10T 436/116664 | . . . | with automated titrator [2015-01] |
Y10T 436/117497 | . . | with a continuously flowing sample or carrier stream [2015-01] |
Y10T 436/118339 | . . . | with formation of a segmented stream [2015-01] |
Y10T 436/119163 | . . | with aspirator of claimed structure [2015-01] |
Y10T 436/12 | . | Condition responsive control [2015-01] |
Y10T 436/13 | . | Tracers or tags [2015-01] |
Y10T 436/14 | . | Heterocyclic carbon compound [i.e. , O, S, N, Se, Te, as only ring hetero atom] [2015-01] |
Y10T 436/141111 | . . | Diverse hetero atoms in same or different rings [e.g., alkaloids, opiates, etc.] [2015-01] |
Y10T 436/142222 | . . | Hetero-O [e.g., ascorbic acid, etc.] [2015-01] |
Y10T 436/143333 | . . . | Saccharide [e.g., DNA, etc.] [2015-01] |
Y10T 436/144444 | . . . . | Glucose [2015-01] |
Y10T 436/145555 | . . | Hetero-N [2015-01] |
Y10T 436/146666 | . . . | Bile pigment [2015-01] |
Y10T 436/147777 | . . . | Plural nitrogen in the same ring [e.g., barbituates, creatinine, etc.] [2015-01] |
Y10T 436/148888 | . . . . | Uric acid [2015-01] |
Y10T 436/15 | . | Inorganic acid or base [e.g. , hcl, sulfuric acid, etc. ] [2015-01] |
Y10T 436/153333 | . . | Halogen containing [2015-01] |
Y10T 436/156666 | . . | Sulfur containing [2015-01] |
Y10T 436/16 | . | Phosphorus containing [2015-01] |
Y10T 436/163333 | . . | Organic [e.g., chemical warfare agents, insecticides, etc.] [2015-01] |
Y10T 436/166666 | . . | of inorganic phosphorus compound in body fluid [2015-01] |
Y10T 436/17 | . | Nitrogen containing [2015-01] |
Y10T 436/170769 | . . | N-Nitroso containing [e.g., nitrosamine, etc.] [2015-01] |
Y10T 436/171538 | . . | Urea or blood urea nitrogen [2015-01] |
Y10T 436/172307 | . . | Cyanide or isocyanide [2015-01] |
Y10T 436/173076 | . . | Nitrite or nitrate [2015-01] |
Y10T 436/173845 | . . | Amine and quaternary ammonium [2015-01] |
Y10T 436/174614 | . . . | Tertiary amine [2015-01] |
Y10T 436/175383 | . . . | Ammonia [2015-01] |
Y10T 436/176152 | . . | Total nitrogen determined [2015-01] |
Y10T 436/176921 | . . . | As part of an elemental analysis [2015-01] |
Y10T 436/177692 | . . | Oxides of nitrogen [2015-01] |
Y10T 436/178459 | . . . | Only nitrogen dioxide [2015-01] |
Y10T 436/179228 | . . . | Both nitrogen oxide and dioxide [2015-01] |
Y10T 436/18 | . | Sulfur containing [2015-01] |
Y10T 436/182 | . . | Organic or sulfhydryl containing [e.g., mercaptan, hydrogen, sulfide, etc.] [2015-01] |
Y10T 436/184 | . . . | Only hydrogen sulfide [2015-01] |
Y10T 436/186 | . . | Sulfur dioxide [2015-01] |
Y10T 436/188 | . . | Total or elemental sulfur [2015-01] |
Y10T 436/19 | . | Halogen containing [2015-01] |
Y10T 436/193333 | . . | In aqueous solution [2015-01] |
Y10T 436/196666 | . . | Carbon containing compound [e.g., vinylchloride, etc.] [2015-01] |
Y10T 436/20 | . | Oxygen containing [2015-01] |
Y10T 436/200833 | . . | Carbonyl, ether, aldehyde or ketone containing [2015-01] |
Y10T 436/201666 | . . . | Carboxylic acid [2015-01] |
Y10T 436/202499 | . . . | Formaldehyde or acetone [2015-01] |
Y10T 436/203332 | . . | Hydroxyl containing [2015-01] |
Y10T 436/204165 | . . . | Ethanol [2015-01] |
Y10T 436/204998 | . . | Inorganic carbon compounds [2015-01] |
Y10T 436/205831 | . . . | Carbon monoxide only [2015-01] |
Y10T 436/206664 | . . | Ozone or peroxide [2015-01] |
Y10T 436/207497 | . . | Molecular oxygen [2015-01] |
Y10T 436/208339 | . . . | Fuel/air mixture or exhaust gas analysis [2015-01] |
Y10T 436/209163 | . . . | Dissolved or trace oxygen or oxygen content of a sealed environment [2015-01] |
Y10T 436/21 | . | Hydrocarbon [2015-01] |
Y10T 436/212 | . . | Aromatic [2015-01] |
Y10T 436/214 | . . | Acyclic [e.g., methane, octane, isoparaffin, etc.] [2015-01] |
Y10T 436/216 | . . . | Unsaturated [e.g., ethylene, diene, etc.] [2015-01] |
Y10T 436/218 | . . | Total hydrocarbon, flammability, combustibility [e.g., air-fuel mixture, etc.] [2015-01] |
Y10T 436/22 | . | Hydrogen, per se [2015-01] |
Y10T 436/23 | . | Carbon containing [2015-01] |
Y10T 436/235 | . . | In an aqueous solution [e.g., TOC, etc.] [2015-01] |
Y10T 436/24 | . | Nuclear magnetic resonance, electron spin resonance or other spin effects or mass spectrometry [2015-01] |
Y10T 436/25 | . | including sample preparation [2015-01] |
Y10T 436/25125 | . . | Digestion or removing interfering materials [2015-01] |
Y10T 436/2525 | . . | Stabilizing or preserving [2015-01] |
Y10T 436/25375 | . . | Liberation or purification of sample or separation of material from a sample [e.g., filtering, centrifuging, etc.] [2015-01] |
Y10T 436/255 | . . . | including use of a solid sorbent, semipermeable membrane, or liquid extraction [2015-01] |
Y10T 436/25625 | . . | Dilution [2015-01] |
Y10T 436/2575 | . . | Volumetric liquid transfer [2015-01] |
Y10T 436/25875 | . . | Gaseous sample or with change of physical state [2015-01] |
Former US Class 442 series [2015-04] |
Y10T 442/00 | Fabric [woven, knitted, or nonwoven textile or cloth, etc.] [2015-04] |
Y10T 442/10 | . | Scrim [e.g., open net or mesh, gauze, loose or open weave or knit, etc.] [2015-04] |
Y10T 442/102 | . . | Woven scrim [2015-04] |
Y10T 442/103 | . . . | Including a multifilament fiber precoated with other than free metal or alloy prior to weaving [2015-04] |
Y10T 442/105 | . . . | Comprising a composite fiber [2015-04] |
Y10T 442/107 | . . . | Comprising at least two chemically different fibers [2015-04] |
Y10T 442/109 | . . . | Metal or metal-coated fiber-containing scrim [2015-04] |
Y10T 442/11 | . . . . | Including an additional free metal or alloy constituent [2015-04] |
Y10T 442/112 | . . . . . | Particulate free metal or alloy constituent [2015-04] |
Y10T 442/114 | . . . . | Including a foam layer [2015-04] |
Y10T 442/116 | . . . . | Including a woven fabric which is not a scrim [2015-04] |
Y10T 442/117 | . . . . . | Including a nonwoven fabric which is not a scrim [2015-04] |
Y10T 442/119 | . . . . | Including a paper layer [2015-04] |
Y10T 442/121 | . . . . | Including a nonwoven fabric which is not a scrim [2015-04] |
Y10T 442/122 | . . . . . | Two or more nonwoven fabric layers [2015-04] |
Y10T 442/124 | . . . . | Including a natural or synthetic rubber layer [2015-04] |
Y10T 442/126 | . . . . | Including a preformed film, foil, or sheet [2015-04] |
Y10T 442/128 | . . . . | Including a layer derived from a water-settable material [e.g., cement, gypsum, etc.] [2015-04] |
Y10T 442/129 | . . . . | Including a ceramic or glass layer [2015-04] |
Y10T 442/131 | . . . . | Including a coating or impregnation of synthetic polymeric material [2015-04] |
Y10T 442/133 | . . . | Inorganic fiber-containing scrim [2015-04] |
Y10T 442/134 | . . . . | Including a carbon or carbonized fiber [2015-04] |
Y10T 442/136 | . . . . | Including a foam layer [2015-04] |
Y10T 442/138 | . . . . | Including a metal layer [2015-04] |
Y10T 442/14 | . . . . | Including an additional scrim layer [2015-04] |
Y10T 442/141 | . . . . | Including a woven fabric which is not a scrim [2015-04] |
Y10T 442/143 | . . . . | Including a nonwoven fabric which is not a scrim [2015-04] |
Y10T 442/145 | . . . . | Including a preformed film, foil, or sheet [2015-04] |
Y10T 442/147 | . . . . | Including a mica layer [2015-04] |
Y10T 442/148 | . . . . | Including a coating or impregnation containing particulate material other than fiber [2015-04] |
Y10T 442/15 | . . . | Including a foam layer [2015-04] |
Y10T 442/152 | . . . | Including a free metal or alloy constituent [2015-04] |
Y10T 442/153 | . . . | Including an additional scrim layer [2015-04] |
Y10T 442/155 | . . . | Including a paper layer [2015-04] |
Y10T 442/157 | . . . . | Two or more paper layers [2015-04] |
Y10T 442/159 | . . . | Including a nonwoven fabric which is not a scrim [2015-04] |
Y10T 442/16 | . . . . | Two or more nonwoven layers [2015-04] |
Y10T 442/162 | . . . | Including a natural or synthetic rubber layer [2015-04] |
Y10T 442/164 | . . . | Including a preformed film, foil, or sheet [2015-04] |
Y10T 442/166 | . . . . | Cellulose acetate film or sheet [2015-04] |
Y10T 442/167 | . . . . | Fluorinated polyolefin film or sheet [2015-04] |
Y10T 442/169 | . . . . | Polyolefin film or sheet [2015-04] |
Y10T 442/171 | . . . | Including a layer derived from a water-settable material [e.g., cement, gypsum, etc.] [2015-04] |
Y10T 442/172 | . . . | Coated or impregnated [2015-04] |
Y10T 442/174 | . . . . | Including particulate material other than fiber in coating or impregnation [2015-04] |
Y10T 442/176 | . . . . | Three or more layers [2015-04] |
Y10T 442/178 | . . . . | Synthetic polymeric fiber [2015-04] |
Y10T 442/179 | . . . . . | Nylon fiber [2015-04] |
Y10T 442/181 | . . . . | Bitumen coating or impregnation [2015-04] |
Y10T 442/183 | . . . | Synthetic polymeric fiber [2015-04] |
Y10T 442/184 | . . | Nonwoven scrim [2015-04] |
Y10T 442/186 | . . . | Comprising a composite fiber [2015-04] |
Y10T 442/188 | . . . | Metal or metal-coated fiber-containing scrim [2015-04] |
Y10T 442/19 | . . . . | Including a paper layer [2015-04] |
Y10T 442/191 | . . . | Inorganic fiber-containing scrim [2015-04] |
Y10T 442/193 | . . . . | Including a foam layer [2015-04] |
Y10T 442/195 | . . . | Including a foam layer [2015-04] |
Y10T 442/197 | . . . | Including a nonwoven fabric which is not a scrim [2015-04] |
Y10T 442/198 | . . . | Coated or impregnated [2015-04] |
Y10T 442/20 | . | Coated or impregnated woven, knit, or nonwoven fabric which is not [a] associated with another preformed layer or fiber layer or, [b] with respect to woven and knit, characterized, respectively, by a particular or differential weave or knit, wherein the coating or impregnation is neither a foamed material nor a free metal or alloy layer [2015-04] |
Y10T 442/2008 | . . | Fabric composed of a fiber or strand which is of specific structural definition [2015-04] |
Y10T 442/2016 | . . | Impregnation is confined to a plane disposed between both major fabric surfaces which are essentially free of impregnating material [2015-04] |
Y10T 442/2025 | . . | Coating produced by extrusion [2015-04] |
Y10T 442/2033 | . . | Coating or impregnation formed in situ [e.g., by interfacial condensation, coagulation, precipitation, etc.] [2015-04] |
Y10T 442/2041 | . . | Two or more non-extruded coatings or impregnations [2015-04] |
Y10T 442/2049 | . . . | Each major face of the fabric has at least one coating or impregnation [2015-04] |
Y10T 442/2057 | . . . . | At least two coatings or impregnations of different chemical composition [2015-04] |
Y10T 442/2066 | . . . . . | Different coatings or impregnations on opposite faces of the fabric [2015-04] |
Y10T 442/2074 | . . . . . | At least one coating or impregnation contains particulate material [2015-04] |
Y10T 442/2082 | . . . . . . | At least one coating or impregnation functions to fix pigments or particles on the surface of a coating or impregnation [2015-04] |
Y10T 442/209 | . . . . | At least one coating or impregnation contains particulate material [2015-04] |
Y10T 442/2098 | . . . | At least two coatings or impregnations of different chemical composition [2015-04] |
Y10T 442/2107 | . . . . | At least one coating or impregnation contains particulate material [2015-04] |
Y10T 442/2115 | . . . . . | At least one coating or impregnation functions to fix pigments or particles on the surface of a coating or impregnation [2015-04] |
Y10T 442/2123 | . . . | At least one coating or impregnation contains particulate material [2015-04] |
Y10T 442/2131 | . . . . | At least one coating or impregnation functions to fix pigments or particles on the surface of a coating or impregnation [2015-04] |
Y10T 442/2139 | . . | Coating or impregnation specified as porous or permeable to a specific substance [e.g., water vapor, air, etc.] [2015-04] |
Y10T 442/2148 | . . . | Coating or impregnation is specified as microporous but is not a foam [2015-04] |
Y10T 442/2156 | . . | Coating or impregnation collects radionuclide or heavy metal [2015-04] |
Y10T 442/2164 | . . | Coating or impregnation specified as water repellent [2015-04] |
Y10T 442/2172 | . . . | Also specified as oil repellent [2015-04] |
Y10T 442/218 | . . . | Organosilicon containing [2015-04] |
Y10T 442/2189 | . . . | Fluorocarbon containing [2015-04] |
Y10T 442/2197 | . . . | Nitrogen containing [2015-04] |
Y10T 442/2205 | . . . | Natural oil or wax containing [2015-04] |
Y10T 442/2213 | . . | Coating or impregnation is specified as weather proof, water vapor resistant, or moisture resistant [2015-04] |
Y10T 442/2221 | . . | Coating or impregnation is specified as water proof [2015-04] |
Y10T 442/223 | . . . | Organosilicon containing [2015-04] |
Y10T 442/2238 | . . . | Fluorocarbon containing [2015-04] |
Y10T 442/2246 | . . . | Nitrogen containing [2015-04] |
Y10T 442/2254 | . . . | Natural oil or wax containing [2015-04] |
Y10T 442/2262 | . . | Coating or impregnation is oil repellent but not oil or stain release [2015-04] |
Y10T 442/227 | . . . | Fluorocarbon containing [2015-04] |
Y10T 442/2279 | . . | Coating or impregnation improves soil repellency, soil release, or anti- soil redeposition qualities of fabric [2015-04] |
Y10T 442/2287 | . . . | Fluorocarbon containing [2015-04] |
Y10T 442/2295 | . . . | Linear polyether group chain containing [2015-04] |
Y10T 442/2303 | . . | Coating or impregnation provides a fragrance or releases an odor intended to be perceptible to humans [2015-04] |
Y10T 442/2311 | . . | Coating or impregnation is a lubricant or a surface friction reducing agent other than specified as improving the "hand" of the fabric or increasing the softness thereof [2015-04] |
Y10T 442/232 | . . . | Fluorocarbon containing [2015-04] |
Y10T 442/2328 | . . . | Organosilicon containing [2015-04] |
Y10T 442/2336 | . . . | Natural oil or wax containing [2015-04] |
Y10T 442/2344 | . . | Coating or impregnation is anti-slip or friction-increasing other than specified as an abrasive [2015-04] |
Y10T 442/2352 | . . | Coating or impregnation functions to soften the feel of or improve the "hand" of the fabric [2015-04] |
Y10T 442/2361 | . . | Coating or impregnation improves stiffness of the fabric other than specified as a size [2015-04] |
Y10T 442/2369 | . . | Coating or impregnation improves elasticity, bendability, resiliency, flexibility, or shape retention of the fabric [2015-04] |
Y10T 442/2377 | . . . | Improves elasticity [2015-04] |
Y10T 442/2385 | . . . | Improves shrink resistance [2015-04] |
Y10T 442/2393 | . . . | Coating or impregnation provides crease-resistance or wash and wear characteristics [2015-04] |
Y10T 442/2402 | . . | Coating or impregnation specified as a size [2015-04] |
Y10T 442/241 | . . | Coating or impregnation improves snag or pull resistance of the fabric [2015-04] |
Y10T 442/2418 | . . | Coating or impregnation increases electrical conductivity or anti-static quality [2015-04] |
Y10T 442/2426 | . . . | Elemental carbon containing [2015-04] |
Y10T 442/2434 | . . . | Linear polyether group chain containing [2015-04] |
Y10T 442/2443 | . . . | Nitrogen and phosphorus containing [2015-04] |
Y10T 442/2451 | . . . | Phosphorus containing [2015-04] |
Y10T 442/2459 | . . . | Nitrogen containing [2015-04] |
Y10T 442/2467 | . . . | Sulphur containing [2015-04] |
Y10T 442/2475 | . . | Coating or impregnation is electrical insulation-providing, -improving, or -increasing, or conductivity-reducing [2015-04] |
Y10T 442/2484 | . . | Coating or impregnation is water absorbency-increasing or hydrophilicity-increasing or hydrophilicity-imparting [2015-04] |
Y10T 442/2492 | . . . | Polyether group containing [2015-04] |
Y10T 442/25 | . . | Coating or impregnation absorbs sound [2015-04] |
Y10T 442/2508 | . . | Coating or impregnation absorbs chemical material other than water [2015-04] |
Y10T 442/2516 | . . . | Chemical material is one used in biological or chemical warfare [2015-04] |
Y10T 442/2525 | . . | Coating or impregnation functions biologically [e.g., insect repellent, antiseptic, insecticide, bactericide, etc.] [2015-04] |
Y10T 442/2533 | . . . | Inhibits mildew [2015-04] |
Y10T 442/2541 | . . . | Insect repellent [2015-04] |
Y10T 442/2549 | . . | Coating or impregnation is chemically inert or of stated nonreactance [2015-04] |
Y10T 442/2557 | . . . | Oxygen or ozone resistant [2015-04] |
Y10T 442/2566 | . . . | Organic solvent resistant [e.g., dry cleaning fluid, etc.] [2015-04] |
Y10T 442/2574 | . . . | Acid or alkali resistant [2015-04] |
Y10T 442/2582 | . . | Coating or impregnation contains an optical bleach or brightener or functions as an optical bleach or brightener [e.g., it masks fabric yellowing, etc.] [2015-04] |
Y10T 442/259 | . . | Coating or impregnation provides protection from radiation [e.g., U.V., visible light, I.R., micscheme-change-itemave, high energy particle, etc.] or heat retention thru radiation absorption [2015-04] |
Y10T 442/2598 | . . . | Radiation reflective [2015-04] |
Y10T 442/2607 | . . . | Radiation absorptive [2015-04] |
Y10T 442/2615 | . . | Coating or impregnation is resistant to penetration by solid implements [2015-04] |
Y10T 442/2623 | . . . | Ballistic resistant [2015-04] |
Y10T 442/2631 | . . | Coating or impregnation provides heat or fire protection [2015-04] |
Y10T 442/2639 | . . . | Coated or impregnated asbestos fabric [2015-04] |
Y10T 442/2648 | . . . | Coating or impregnation is specified as an intumescent material [2015-04] |
Y10T 442/2656 | . . . | Antimony containing [2015-04] |
Y10T 442/2664 | . . . | Boron containing [2015-04] |
Y10T 442/2672 | . . . | Phosphorus containing [2015-04] |
Y10T 442/268 | . . . . | Phosphorus and nitrogen containing compound [2015-04] |
Y10T 442/2689 | . . . . | A phosphorus containing compound and a nitrogen containing compound [2015-04] |
Y10T 442/2697 | . . . . | Phosphorus and halogen containing compound [2015-04] |
Y10T 442/2705 | . . . . | A phosphorus containing compound and a halogen containing compound [2015-04] |
Y10T 442/2713 | . . . | Halogen containing [2015-04] |
Y10T 442/2721 | . . . | Nitrogen containing [2015-04] |
Y10T 442/273 | . . | Coating or impregnation provides wear or abrasion resistance [2015-04] |
Y10T 442/2738 | . . | Coating or impregnation intended to function as an adhesive to solid surfaces subsequently associated therewith [2015-04] |
Y10T 442/2746 | . . . | Heat-activatable adhesive [2015-04] |
Y10T 442/2754 | . . . | Pressure-sensitive adhesive [2015-04] |
Y10T 442/2762 | . . | Coated or impregnated natural fiber fabric [e.g., cotton, wool, silk, linen, etc.] [2015-04] |
Y10T 442/277 | . . . | Coated or impregnated cellulosic fiber fabric [2015-04] |
Y10T 442/2779 | . . . . | Coating or impregnation contains an acrylic polymer or copolymer [e.g., polyacrylonitrile, polyacrylic acid, etc.] [2015-04] |
Y10T 442/2787 | . . . . | Coating or impregnation contains a vinyl polymer or copolymer [2015-04] |
Y10T 442/2795 | . . . . | Coating or impregnation contains an epoxy polymer or copolymer or polyether [2015-04] |
Y10T 442/2803 | . . . . | Polymeric coating or impregnation from a silane or siloxane not specified as lubricant or water repellent [2015-04] |
Y10T 442/2811 | . . . . | Coating or impregnation contains polyimide or polyamide [2015-04] |
Y10T 442/282 | . . . . | Coating or impregnation contains natural gum, rosin, natural oil, or wax [2015-04] |
Y10T 442/2828 | . . . . | Coating or impregnation contains aldehyde or ketone condensation product [2015-04] |
Y10T 442/2836 | . . . . . | Phenol-aldehyde condensate [2015-04] |
Y10T 442/2844 | . . . . . | Melamine-aldehyde condensate [2015-04] |
Y10T 442/2852 | . . . . . | Amide-aldehyde condensate [e.g., modified urea-aldehyde condensate, etc.] [2015-04] |
Y10T 442/2861 | . . | Coated or impregnated synthetic organic fiber fabric [2015-04] |
Y10T 442/2869 | . . . | Coated or impregnated regenerated cellulose fiber fabric [2015-04] |
Y10T 442/2877 | . . . | Coated or impregnated polyvinyl alcohol fiber fabric [2015-04] |
Y10T 442/2885 | . . . | Coated or impregnated acrylic fiber fabric [2015-04] |
Y10T 442/2893 | . . . | Coated or impregnated polyamide fiber fabric [2015-04] |
Y10T 442/2902 | . . . . | Aromatic polyamide fiber fabric [2015-04] |
Y10T 442/291 | . . . | Coated or impregnated polyolefin fiber fabric [2015-04] |
Y10T 442/2918 | . . . . | Polypropylene fiber fabric [2015-04] |
Y10T 442/2926 | . . | Coated or impregnated inorganic fiber fabric [2015-04] |
Y10T 442/2934 | . . . | Coating or impregnation contains vinyl polymer or copolymer [2015-04] |
Y10T 442/2943 | . . . . | Vinyl acetate polymer or copolymer [2015-04] |
Y10T 442/2951 | . . . | Coating or impregnation contains epoxy polymer or copolymer or polyether [2015-04] |
Y10T 442/2959 | . . . | Coating or impregnation contains aldehyde or ketone condensation product [2015-04] |
Y10T 442/2967 | . . . . | Amide-aldehyde condensate [2015-04] |
Y10T 442/2975 | . . . | Coated or impregnated ceramic fiber fabric [2015-04] |
Y10T 442/2984 | . . . | Coated or impregnated carbon or carbonaceous fiber fabric [2015-04] |
Y10T 442/2992 | . . . | Coated or impregnated glass fiber fabric [2015-04] |
Y10T 442/30 | . | Woven fabric [i.e., woven strand or strip material] [2015-04] |
Y10T 442/3008 | . . | Woven fabric has an elastic quality [2015-04] |
Y10T 442/3016 | . . . | Including a preformed layer other than the elastic woven fabric [e.g., fabric or film or foil or sheet layer, etc.] [2015-04] |
Y10T 442/3024 | . . . | Including elastic strand or strip [2015-04] |
Y10T 442/3033 | . . | Including a strip or ribbon [2015-04] |
Y10T 442/3041 | . . . | Woven fabric comprises strips or ribbons only [2015-04] |
Y10T 442/3049 | . . | Including strand precoated with other than free metal or alloy [2015-04] |
Y10T 442/3057 | . . . | Multiple coatings [2015-04] |
Y10T 442/3065 | . . | Including strand which is of specific structural definition [2015-04] |
Y10T 442/3073 | . . . | Strand material is core-spun [not sheath-core bicomponent strand] [2015-04] |
Y10T 442/3081 | . . . . | Core is synthetic polymeric material [2015-04] |
Y10T 442/3089 | . . . | Cross-sectional configuration of strand material is specified [2015-04] |
Y10T 442/3098 | . . . . | Cross-sectional configuration varies longitudinaly along the strand [2015-04] |
Y10T 442/3106 | . . . . | Hollow strand material [2015-04] |
Y10T 442/3114 | . . . . | Cross-sectional configuration of the strand material is other than circular [2015-04] |
Y10T 442/3122 | . . . . . | Cross-sectional configuration is multi-lobal [2015-04] |
Y10T 442/313 | . . . | Strand material formed of individual filaments having different chemical compositions [2015-04] |
Y10T 442/3138 | . . . . | Including inorganic filament [2015-04] |
Y10T 442/3146 | . . | Strand material is composed of two or more polymeric materials in physically distinct relationship [e.g., sheath-core, side-by-side, islands-in-sea, fibrils-in-matrix, etc.] or composed of physical blend of chemically different polymeric materials or a physical blend of a polymeric material and a filler material [2015-04] |
Y10T 442/3154 | . . . | Sheath-core multicomponent strand material [2015-04] |
Y10T 442/3163 | . . . | Islands-in-sea multicomponent strand material [2015-04] |
Y10T 442/3171 | . . . | Strand material is a blend of polymeric material and a filler material [2015-04] |
Y10T 442/3179 | . . | Woven fabric is characterized by a particular or differential weave other than fabric in which the strand denier or warp/weft pick count is specified [2015-04] |
Y10T 442/3187 | . . . | Triaxially woven fabric [2015-04] |
Y10T 442/3195 | . . . | Three-dimensional weave [e.g., x-y-z planes, multi-planar warps and/or wefts, etc.] [2015-04] |
Y10T 442/3203 | . . . . | Multi-planar warp layers [2015-04] |
Y10T 442/3211 | . . . . | Multi-planar weft layers [2015-04] |
Y10T 442/322 | . . . | Warp differs from weft [2015-04] |
Y10T 442/3228 | . . . . | Materials differ [2015-04] |
Y10T 442/3236 | . . . . . | Including inorganic strand material [2015-04] |
Y10T 442/3244 | . . . . . . | Including natural strand material [e.g., cotton, wool, etc.] [2015-04] |
Y10T 442/3252 | . . . . . . | Including synthetic polymeric strand material [2015-04] |
Y10T 442/326 | . . . . . | Including synthetic polymeric strand material [2015-04] |
Y10T 442/3268 | . . . . . . | Including natural strand material [2015-04] |
Y10T 442/3276 | . . . . . . | Including polyamide strand material [2015-04] |
Y10T 442/3285 | . . . . . . | Including polyester strand material [2015-04] |
Y10T 442/3293 | . . . | Warp and weft are identical and contain at least two chemically different strand materials [2015-04] |
Y10T 442/3301 | . . . | Coated, impregnated, or autogenous bonded [2015-04] |
Y10T 442/3309 | . . . . | Woven fabric contains inorganic strand material [2015-04] |
Y10T 442/3317 | . . . . | Woven fabric contains synthetic polymeric strand material [2015-04] |
Y10T 442/3325 | . . | Including a foamed layer or component [2015-04] |
Y10T 442/3333 | . . . | Including a free metal or alloy constituent [2015-04] |
Y10T 442/3341 | . . . | Plural foam layers [2015-04] |
Y10T 442/335 | . . . | Plural fabric layers [2015-04] |
Y10T 442/3358 | . . . . | Including a nonwoven fabric layer [2015-04] |
Y10T 442/3366 | . . . | Woven fabric is coated, impregnated, or autogenously bonded [2015-04] |
Y10T 442/3374 | . . . . | Coating or impregnation includes particulate material other than fiber [2015-04] |
Y10T 442/3382 | . . | Including a free metal or alloy constituent [2015-04] |
Y10T 442/339 | . . . | Metal or metal-coated strand [2015-04] |
Y10T 442/3398 | . . . | Vapor or sputter deposited metal layer [2015-04] |
Y10T 442/3407 | . . . | Chemically deposited metal layer [e.g., chemical precipitation or electrochemical deposition or plating, etc.] [2015-04] |
Y10T 442/3415 | . . . | Preformed metallic film or foil or sheet [film or foil or sheet had structural integrity prior to association with the woven fabric] [2015-04] |
Y10T 442/3423 | . . . . | Plural metallic films or foils or sheets [2015-04] |
Y10T 442/3431 | . . . . | Plural fabric layers [2015-04] |
Y10T 442/3439 | . . . . . | Including a nonwoven fabric layer [2015-04] |
Y10T 442/3447 | . . . . | Including a preformed synthetic polymeric film or sheet [i.e., film or sheet having structural integrity prior to association with the woven fabric] [2015-04] |
Y10T 442/3455 | . . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/3463 | . . . | Plural fabric layers [2015-04] |
Y10T 442/3472 | . . | Woven fabric including an additional woven fabric layer [2015-04] |
Y10T 442/348 | . . . | Mechanically needled or hydroentangled [2015-04] |
Y10T 442/3488 | . . . . | Four or more layers [2015-04] |
Y10T 442/3496 | . . . . | Coated, impregnated, or autogenously bonded [2015-04] |
Y10T 442/3504 | . . . | Woven fabric layers comprise chemically different strand material [2015-04] |
Y10T 442/3512 | . . . . | Three or more fabric layers [2015-04] |
Y10T 442/352 | . . . . . | One of which is a nonwoven fabric layer [2015-04] |
Y10T 442/3528 | . . . | Three or more fabric layers [2015-04] |
Y10T 442/3537 | . . . . | One of which is a nonwoven fabric layer [2015-04] |
Y10T 442/3545 | . . . . | Woven fabric layers impregnated with a blend of thermosetting and thermoplastic resins [2015-04] |
Y10T 442/3553 | . . . . | Woven fabric layers impregnated with an organosilicon resin [2015-04] |
Y10T 442/3561 | . . . . | Woven fabric layers impregnated with a natural or synthetic rubber [2015-04] |
Y10T 442/3569 | . . . . | Woven fabric layers impregnated with a thermosetting resin [2015-04] |
Y10T 442/3577 | . . . . . | Phenolic resin [2015-04] |
Y10T 442/3585 | . . . . . | Epoxy resin [2015-04] |
Y10T 442/3594 | . . . . | Woven fabric layers impregnated with a thermoplastic resin [e.g., vinyl polymer, etc.] [2015-04] |
Y10T 442/3602 | . . . | Three or more distinct layers [2015-04] |
Y10T 442/361 | . . . . | At least one layer is derived from water-settable material [e.g., cement, gypsum, etc.] [2015-04] |
Y10T 442/3618 | . . . . | At least one layer contains wood or cork [2015-04] |
Y10T 442/3626 | . . . . | At least one layer contains bituminous material [e.g., tar, pitch, asphalt, etc.] [2015-04] |
Y10T 442/3634 | . . . . | At least one layer comprises paper [2015-04] |
Y10T 442/3642 | . . . . | At least one layer contains natural or synthetic rubber [2015-04] |
Y10T 442/365 | . . . . | At least one layer is a preformed synthetic polymeric film or sheet [2015-04] |
Y10T 442/3659 | . . . . | At least one layer comprises ceramic or glass material in other than particulate form [2015-04] |
Y10T 442/3667 | . . . . | Composite consisting of at least two woven fabrics bonded by an interposed adhesive layer [but not two woven fabrics bonded together by an impregnation which penetrates through the thickness of at least one of the woven fabric layers] [2015-04] |
Y10T 442/3675 | . . . . . | Fabric layer contains natural strand material [2015-04] |
Y10T 442/3683 | . . . . . | Fabric layer contains carbon or carbonaceous strand material [2015-04] |
Y10T 442/3691 | . . . . . | Fabric layer contains glass strand material [2015-04] |
Y10T 442/3699 | . . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/3707 | . . | Woven fabric including a nonwoven fabric layer other than paper [2015-04] |
Y10T 442/3715 | . . . | Nonwoven fabric layer comprises parallel arrays of strand material [2015-04] |
Y10T 442/3724 | . . . | Needled [2015-04] |
Y10T 442/3732 | . . . . | Including an additional nonwoven fabric [2015-04] |
Y10T 442/374 | . . . . . | Additional nonwoven fabric comprises chemically different strand material than the first nonwoven fabric [2015-04] |
Y10T 442/3748 | . . . . . | Including inorganic strand material [2015-04] |
Y10T 442/3756 | . . . . | Nonwoven fabric layer comprises at least two chemically different fibers [2015-04] |
Y10T 442/3764 | . . . . | Coated, impregnated, or autogenously bonded [2015-04] |
Y10T 442/3772 | . . . | Hydroentangled [2015-04] |
Y10T 442/378 | . . . | Coated, impregnated, or autogenously bonded [2015-04] |
Y10T 442/3789 | . . . . | Plural nonwoven fabric layers [2015-04] |
Y10T 442/3797 | . . . . | Coating or impregnation is derived from a water-settable material [e.g., cement, gypsum, etc.] [2015-04] |
Y10T 442/3805 | . . . . | Coating or impregnation contains natural or synthetic rubber [2015-04] |
Y10T 442/3813 | . . . . | Coating or impregnation contains synthetic polymeric material [2015-04] |
Y10T 442/3821 | . . . . | Coating or impregnation contains bituminous material [2015-04] |
Y10T 442/3829 | . . . . | Four or more layers [2015-04] |
Y10T 442/3837 | . . . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/3846 | . . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/3854 | . . | Woven fabric with a preformed polymeric film or sheet [2015-04] |
Y10T 442/3862 | . . . | Ester condensation polymer sheet or film [e.g., polyethylene terephthalate, etc.] [2015-04] |
Y10T 442/387 | . . . | Vinyl polymer or copolymer sheet or film [e.g., polyvinyl chloride, polyvinylidene chloride, polyvinyl acetate, etc.] [2015-04] |
Y10T 442/3878 | . . . | Fluorinated olefin polymer or copolymer sheet or film [e.g., Teflon@, etc.] [2015-04] |
Y10T 442/3886 | . . . | Olefin polymer or copolymer sheet or film [e.g., polypropylene, polyethylene, ethylene-butylene copolymer, etc.] [2015-04] |
Y10T 442/3894 | . . . | Amide condensation polymer sheet or film [e.g., nylon 6, etc.] [2015-04] |
Y10T 442/3902 | . . . | Polyimide sheet or film [2015-04] |
Y10T 442/3911 | . . . | Natural or synthetic rubber sheet or film [2015-04] |
Y10T 442/3919 | . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/3927 | . . | Including a paper or wood pulp layer [2015-04] |
Y10T 442/3935 | . . . | Mica paper layer [2015-04] |
Y10T 442/3943 | . . . | Plural paper or wood pulp layers [2015-04] |
Y10T 442/3951 | . . . | Including a bituminous layer [2015-04] |
Y10T 442/3959 | . . . | Including an outermost adhesive layer [2015-04] |
Y10T 442/3967 | . . . | Including a natural or synthetic rubber layer [2015-04] |
Y10T 442/3976 | . . | Including strand which is stated to have specific attributes [e.g., heat or fire resistance, chemical or solvent resistance, high absorption for aqueous composition, water solubility, heat shrinkability, etc.] [2015-04] |
Y10T 442/3984 | . . . | Strand is other than glass and is heat or fire resistant [2015-04] |
Y10T 442/3992 | . . . | Strand is heat shrinkable [2015-04] |
Y10T 442/40 | . | Knit fabric [i.e., knit strand or strip material] [2015-04] |
Y10T 442/406 | . . | Including parallel strips [2015-04] |
Y10T 442/413 | . . | Including an elastic strand [2015-04] |
Y10T 442/419 | . . | Including strand precoated with other than free metal or alloy [2015-04] |
Y10T 442/425 | . . | Including strand which is of specific structural definition [2015-04] |
Y10T 442/431 | . . . | Cross-sectional configuration of strand material is specified [2015-04] |
Y10T 442/438 | . . . | Strand material formed of individual filaments having different chemical compositions [2015-04] |
Y10T 442/444 | . . | Strand is a monofilament composed of two or more polymeric materials in physically distinct relationship [e.g., sheath-core, side-by-side, islands-in-sea, fibrils-in-matrix, etc.] or composed of physical blend of chemically different polymeric materials or a physical blend of a polymeric material and a filler material [2015-04] |
Y10T 442/45 | . . | Knit fabric is characterized by a particular or differential knit pattern other than open knit fabric or a fabric in which the strand denier is specified [2015-04] |
Y10T 442/456 | . . . | Including additional strand inserted within knit fabric [2015-04] |
Y10T 442/463 | . . . . | Warp knit insert strand [2015-04] |
Y10T 442/469 | . . | Including a foamed layer or component [2015-04] |
Y10T 442/475 | . . | Including a free metal or alloy constituent [2015-04] |
Y10T 442/481 | . . . | Chemically deposited metal layer [e.g., chemical precipitation or electrochemical deposition or plating, etc.] [2015-04] |
Y10T 442/488 | . . | Including an additional knit fabric layer [2015-04] |
Y10T 442/494 | . . | Including a nonwoven fabric layer other than paper [2015-04] |
Y10T 442/50 | . | FELT FABRIC [2015-04] |
Y10T 442/51 | . . | From natural organic fiber [e.g., wool, etc.] [2015-04] |
Y10T 442/53 | . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/54 | . . . | At least three layers [2015-04] |
Y10T 442/56 | . . | From synthetic organic fiber [2015-04] |
Y10T 442/57 | . . | Including particulate material other than fiber [2015-04] |
Y10T 442/59 | . . | At least three layers [2015-04] |
Y10T 442/60 | . | Nonwoven fabric [i.e., nonwoven strand or fiber material] [2015-04] |
Y10T 442/601 | . . | Nonwoven fabric has an elastic quality [2015-04] |
Y10T 442/602 | . . . | Nonwoven fabric comprises an elastic strand or fiber material [2015-04] |
Y10T 442/603 | . . | Including strand or fiber material precoated with other than free metal or alloy [2015-04] |
Y10T 442/604 | . . . | Strand or fiber material is glass [2015-04] |
Y10T 442/605 | . . . | Strand or fiber material is inorganic [2015-04] |
Y10T 442/607 | . . . | Strand or fiber material is synthetic polymer [2015-04] |
Y10T 442/608 | . . | Including strand or fiber material which is of specific structural definition [2015-04] |
Y10T 442/609 | . . . | Cross-sectional configuration of strand or fiber material is specified [2015-04] |
Y10T 442/61 | . . . . | Cross-sectional configuration varies longitudinally along strand or fiber material [2015-04] |
Y10T 442/611 | . . . . | Cross-sectional configuration of strand or fiber material is other than circular [2015-04] |
Y10T 442/612 | . . . . | Hollow strand or fiber material [2015-04] |
Y10T 442/613 | . . . . | Microcellular strand or fiber material [2015-04] |
Y10T 442/614 | . . . | Strand or fiber material specified as having microdimensions [i.e., microfiber] [2017-08] |
Y10T 442/615 | . . . . | Strand or fiber material is blended with another chemically different microfiber in the same layer [2015-04] |
Y10T 442/616 | . . . . . | Blend of synthetic polymeric and inorganic microfibers [2015-04] |
Y10T 442/618 | . . . . . | Blend of chemically different inorganic microfibers [2015-04] |
Y10T 442/619 | . . . . | Including other strand or fiber material in the same layer not specified as having microdimensions [2017-08] |
Y10T 442/62 | . . . . | Including another chemically different microfiber in a separate layer [2015-04] |
Y10T 442/621 | . . . . | Including other strand or fiber material in a different layer not specified as having microdimensions [2017-08] |
Y10T 442/622 | . . . . | Microfiber is a composite fiber [2015-04] |
Y10T 442/623 | . . . . | Microfiber is glass [2015-04] |
Y10T 442/624 | . . . . | Microfiber is carbon or carbonaceous [2015-04] |
Y10T 442/625 | . . . . | Autogenously bonded [2015-04] |
Y10T 442/626 | . . . . | Microfiber is synthetic polymer [2015-04] |
Y10T 442/627 | . . . | Strand or fiber material is specified as non-linear [e.g., crimped, coiled, etc.] [2015-04] |
Y10T 442/629 | . . . . | Composite strand or fiber material [2015-04] |
Y10T 442/63 | . . . . | Carbon or carbonaceous strand or fiber material [2015-04] |
Y10T 442/631 | . . . . | Glass strand or fiber material [2015-04] |
Y10T 442/632 | . . . . | A single nonwoven layer comprising non-linear synthetic polymeric strand or fiber material and strand or fiber material not specified as non-linear [2015-04] |
Y10T 442/633 | . . . . . | Synthetic polymeric strand or fiber material is of staple length [2015-04] |
Y10T 442/634 | . . . . | A nonwoven fabric having a layer comprising non-linear synthetic polymeric strand or fiber material and a separate and distinct layer comprising strand or fiber material which is not specified as non-linear [2015-04] |
Y10T 442/635 | . . . . | Synthetic polymeric strand or fiber material [2015-04] |
Y10T 442/636 | . . . . . | Synthetic polymeric strand or fiber material is of staple length [2015-04] |
Y10T 442/637 | . . | Including strand or fiber material which is a monofilament composed of two or more polymeric materials in physically distinct relationship [e.g., sheath-core, side-by-side, islands-in-sea, fibrils-in-matrix, etc.] or composed of physical blend of chemically different polymeric materials or a physical blend of a polymeric material and a filler material [2015-04] |
Y10T 442/638 | . . . | Side-by-side multicomponent strand or fiber material [2015-04] |
Y10T 442/64 | . . . | Islands-in-sea multicomponent strand or fiber material [2015-04] |
Y10T 442/641 | . . . | Sheath-core multicomponent strand or fiber material [2015-04] |
Y10T 442/642 | . . . | Strand or fiber material is a blend of polymeric material and a filler material [2015-04] |
Y10T 442/643 | . . | Including parallel strand or fiber material within the nonwoven fabric [2015-04] |
Y10T 442/644 | . . . | Parallel strand or fiber material is glass [2015-04] |
Y10T 442/645 | . . . | Parallel strand or fiber material is inorganic [e.g., rock wool, mineral wool, etc.] [2015-04] |
Y10T 442/646 | . . . | Parallel strand or fiber material is naturally occurring [e.g., cotton, wool, etc.] [2015-04] |
Y10T 442/647 | . . | Including a foamed layer or component [2015-04] |
Y10T 442/648 | . . . | Including a free metal or alloy constituent [2015-04] |
Y10T 442/649 | . . . | Plural foamed layers [2015-04] |
Y10T 442/651 | . . . | Plural fabric layers [2015-04] |
Y10T 442/652 | . . . | Nonwoven fabric is coated, impregnated, or autogenously bonded [2015-04] |
Y10T 442/653 | . . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/654 | . . | Including a free metal or alloy constituent [2015-04] |
Y10T 442/655 | . . . | Metal or metal-coated strand or fiber material [2015-04] |
Y10T 442/656 | . . . | Preformed metallic film or foil or sheet [film or foil or sheet had structural integrity prior to association with the nonwoven fabric] [2015-04] |
Y10T 442/657 | . . . | Vapor, chemical, or spray deposited metal layer [2015-04] |
Y10T 442/658 | . . . | Particulate free metal or alloy constituent [2015-04] |
Y10T 442/659 | . . | Including an additional nonwoven fabric [2015-04] |
Y10T 442/66 | . . . | Additional nonwoven fabric is a spun-bonded fabric [2015-04] |
Y10T 442/662 | . . . . | Needled [2015-04] |
Y10T 442/663 | . . . . | Hydroentangled [2015-04] |
Y10T 442/664 | . . . | Including a wood fiber containing layer [2015-04] |
Y10T 442/665 | . . . | Including a layer derived from a water-settable material [e.g., cement, gypsum, etc.] [2015-04] |
Y10T 442/666 | . . . | Mechanically interengaged by needling or impingement of fluid [e.g., gas or liquid stream, etc.] [2015-04] |
Y10T 442/667 | . . . . | Needled [2015-04] |
Y10T 442/668 | . . . | Separate nonwoven fabric layers comprise chemically different strand or fiber material [2015-04] |
Y10T 442/669 | . . . . | At least one layer of inorganic strand or fiber material and at least one layer of synthetic polymeric strand or fiber material [2015-04] |
Y10T 442/67 | . . . | Multiple nonwoven fabric layers composed of the same inorganic strand or fiber material [2015-04] |
Y10T 442/671 | . . . | Multiple nonwoven fabric layers composed of the same polymeric strand or fiber material [2015-04] |
Y10T 442/673 | . . . | Including particulate material other than fiber [2015-04] |
Y10T 442/674 | . . | Nonwoven fabric with a preformed polymeric film or sheet [2015-04] |
Y10T 442/675 | . . . | Ester condensation polymer sheet or film [e.g., polyethylene terephthalate, etc.] [2015-04] |
Y10T 442/676 | . . . | Vinyl polymer or copolymer sheet or film [e.g., polyvinyl chloride, polyvinylidene chloride, polyvinyl acetate, etc.] [2015-04] |
Y10T 442/677 | . . . | Fluorinated olefin polymer or copolymer sheet or film [e.g., TeflonR, etc.] [2015-04] |
Y10T 442/678 | . . . | Olefin polymer or copolymer sheet or film [e.g., polypropylene, polyethylene, ethylene-butylene copolymer, etc.] [2015-04] |
Y10T 442/679 | . . . | Natural or synthetic rubber sheet or film [2015-04] |
Y10T 442/68 | . . | Melt-blown nonwoven fabric [2015-04] |
Y10T 442/681 | . . | Spun-bonded nonwoven fabric [2015-04] |
Y10T 442/682 | . . | Needled nonwoven fabric [2015-04] |
Y10T 442/684 | . . . | Containing at least two chemically different strand or fiber materials [2015-04] |
Y10T 442/685 | . . . . | Containing inorganic and polymeric strand or fiber materials [2015-04] |
Y10T 442/686 | . . . . | Containing polymeric and natural strand or fiber materials [2015-04] |
Y10T 442/687 | . . . . | Containing inorganic strand or fiber material [2015-04] |
Y10T 442/688 | . . . . | Containing polymeric strand or fiber material [2015-04] |
Y10T 442/689 | . . | Hydroentangled nonwoven fabric [2015-04] |
Y10T 442/69 | . . | Autogenously bonded nonwoven fabric [2015-04] |
Y10T 442/691 | . . . | Inorganic strand or fiber material only [2015-04] |
Y10T 442/692 | . . . | Containing at least two chemically different strand or fiber materials [2015-04] |
Y10T 442/693 | . . | Including a paper layer [2015-04] |
Y10T 442/695 | . . | Including a wood containing layer [2015-04] |
Y10T 442/696 | . . | Including strand or fiber material which is stated to have specific attributes [e.g., heat or fire resistance, chemical or solvent resistance, high absorption for aqueous compositions, water solubility, heat shrinkability, etc.] [2015-04] |
Y10T 442/697 | . . | Containing at least two chemically different strand or fiber materials [2015-04] |
Y10T 442/698 | . . . | Containing polymeric and natural strand or fiber materials [2015-04] |
Y10T 442/699 | . . | Including particulate material other than strand or fiber material [2015-04] |
Former US Class 464 Series [2015-01] |
Y10T 464/00 | Rotary shafts, gudgeons, housings, and flexible couplings for rotary shafts [2015-01] |
Former US Class 483 Series [2015-01] |
Y10T 483/00 | Tool changing [2015-01] |
Y10T 483/10 | . | Process [2015-01] |
Y10T 483/11 | . | with safety means [2015-01] |
Y10T 483/115 | . . | Guard [2015-01] |
Y10T 483/12 | . | with means to regulate operation by means of replaceable information supply [e.g. , templet, tape, card, etc. ] [2015-01] |
Y10T 483/123 | . . | Replaceable information comprising tool location [2015-01] |
Y10T 483/127 | . . . | including determining optimum tool access path [2015-01] |
Y10T 483/13 | . | with control means energized in response to activator stimulated by condition sensor [2015-01] |
Y10T 483/132 | . . | Responsive to tool identifying information [2015-01] |
Y10T 483/134 | . . . | Identifying information on tool or tool holder [2015-01] |
Y10T 483/136 | . . | Responsive to tool [2015-01] |
Y10T 483/138 | . . . | including means to monitor and control, i.e., adaptive machining [2015-01] |
Y10T 483/14 | . | with signal or indicator [2015-01] |
Y10T 483/15 | . | with means to condition or adjust tool or tool support [2015-01] |
Y10T 483/16 | . | with means to transfer work [2015-01] |
Y10T 483/165 | . . | Plural machine tools, e.g., flexible manufacturing [2015-01] |
Y10T 483/17 | . | including machine tool or component [2015-01] |
Y10T 483/1702 | . . | Rotating work machine tool [e.g., screw machine, lathe, etc.] [2015-01] |
Y10T 483/1705 | . . . | Tool support comprises rotary spindle [2015-01] |
Y10T 483/1707 | . . . | Tool having specific mounting or work treating feature [2015-01] |
Y10T 483/171 | . . . . | Workpiece holder [e.g., chuck or chuck jaw, collet, etc.] [2015-01] |
Y10T 483/1712 | . . . . | Turning tool insert changer [2015-01] |
Y10T 483/1714 | . . . | Tool changer between tool support and matrix [2015-01] |
Y10T 483/1717 | . . . . | Plural matrices [2015-01] |
Y10T 483/1719 | . . . . | Tool support comprises turret [2015-01] |
Y10T 483/1721 | . . . . . | Linearly moveable tool changer [2015-01] |
Y10T 483/1724 | . . . . | Linearly moveable tool changer [2015-01] |
Y10T 483/1726 | . . . | Direct tool exchange between tool support and matrix [2015-01] |
Y10T 483/1729 | . . | Reciprocating tool machine tool [e.g., broaching machine, shaping machine, etc.] [2015-01] |
Y10T 483/1731 | . . . | including matrix [2015-01] |
Y10T 483/1733 | . . | Rotary spindle machine tool [e.g., milling machine, boring, machine, grinding machine, etc.] [2015-01] |
Y10T 483/1736 | . . . | Tool having specific mounting or work treating feature [2015-01] |
Y10T 483/1738 | . . . . | Tool head [2015-01] |
Y10T 483/174 | . . . . | Abrading wheel [2015-01] |
Y10T 483/1743 | . . . . | including means for angularly orienting tool and spindle [2015-01] |
Y10T 483/1745 | . . . . . | Spindle angularly oriented to align with tool [2015-01] |
Y10T 483/1748 | . . . | Tool changer between spindle and matrix [2015-01] |
Y10T 483/175 | . . . . | Plural matrices [2015-01] |
Y10T 483/1752 | . . . . | including tool holder pivotable about axis [2015-01] |
Y10T 483/1755 | . . . . . | Plural tool holders pivotable about common axis [2015-01] |
Y10T 483/1757 | . . . . . . | including intermediate tool changer [2015-01] |
Y10T 483/176 | . . . . . . . | Intermediate tool changer includes tool holder pivotable about axis [2015-01] |
Y10T 483/1762 | . . . . . . | Tool holders pivotable with respect to each other [2015-01] |
Y10T 483/1764 | . . . . . . | Tool holders pivotable about plural nonparallel axes [2015-01] |
Y10T 483/1767 | . . . . . . | Linearly movable tool holders [2015-01] |
Y10T 483/1769 | . . . . . . . | Extensible tool holders [2015-01] |
Y10T 483/1771 | . . . . . . . | Translatable axis [2015-01] |
Y10T 483/1774 | . . . . . | Distinct tool changer for each tool [2015-01] |
Y10T 483/1776 | . . . . . | including intermediate tool changer [2015-01] |
Y10T 483/1779 | . . . . . | Linearly movable tool holder [2015-01] |
Y10T 483/1781 | . . . . . | Tool holder pivotable about plural nonparallel axes [2015-01] |
Y10T 483/1783 | . . . . | including linearly translatable tool changer [e.g., shuttle, ram, etc.] [2015-01] |
Y10T 483/1786 | . . . . . | Plural tool holders [2015-01] |
Y10T 483/1788 | . . . . . | Orthogonally translatable [2015-01] |
Y10T 483/179 | . . . | Direct tool exchange between spindle and matrix [2015-01] |
Y10T 483/1793 | . . . . | Spindle comprises tool changer [2015-01] |
Y10T 483/1795 | . . . . . | Matrix indexes selected tool to transfer position [2015-01] |
Y10T 483/1798 | . . . . | including means to project tool from matrix [2015-01] |
Y10T 483/18 | . | Tool transfer to or from matrix [2015-01] |
Y10T 483/1809 | . . | Matrix including means to latch tool [2015-01] |
Y10T 483/1818 | . . | Matrix including means to project tool for transfer [2015-01] |
Y10T 483/1827 | . . . | Rectilinear [2015-01] |
Y10T 483/1836 | . . . | Pivoting [2015-01] |
Y10T 483/1845 | . . | Plural matrices [2015-01] |
Y10T 483/1855 | . . . | including tool replenishing [2015-01] |
Y10T 483/1864 | . . | including tool pot or adapter [2015-01] |
Y10T 483/1873 | . . | Indexing matrix [2015-01] |
Y10T 483/1882 | . . . | Rotary disc [2015-01] |
Y10T 483/1891 | . . . | Chain or belt [2015-01] |
Y10T 483/19 | . | Miscellaneous [2015-01] |