Cooperative Patent Classification


Version: 2017.05
CPC
COOPERATIVE PATENT CLASSIFICATION
E05D
HINGES OR OTHER SUSPENSION DEVICES FOR DOORS, WINDOWS OR WINGS ({foldable tables A47B 3/00; hinged panels A47B 5/00; foldable chairs A47C 4/00; making hinges B21D 53/40, B21K 13/02; making holes for taking-up fittings B27F 5/12; for vehicle tailboards B60P 1/26; for refuse receptacles B65F 1/1646 } ; pivotal connections in general F16C 11/00 {; mounting of stove or range doors F24C 15/023; for folding flat displays of portable computers G06F 1/1616}) [2015-10]
WARNING

E05D 1/00
Pinless hinges; Substitutes for hinges [2013-01]
E05D 1/02
.
made of one piece [2013-01]
E05D 1/04
.
with guide members shaped as circular arcs [2013-01]
E05D 2001/045
. .
{for telescopic hinges} [2013-01]
E05D 1/06
.
consisting of two easily-separable parts [2013-01]
E05D 3/00
Hinges with pins {(E05D 7/08 takes precedence)} [2013-01]
E05D 3/02
.
with one pin [2013-01]
E05D 3/022
. .
{allowing an additional lateral movement, e.g. for sealing} [2013-01]
E05D 2003/025
. .
{having three knuckles} [2013-01]
E05D 2003/027
. . .
{the end knuckles being mutually connected} [2013-01]
E05D 3/04
. .
engaging three or more parts, e.g. sleeves, movable relatively to one another for connecting two or more wings to another member [2013-01]
E05D 3/06
.
with two or more pins (E05D 7/08 takes precedence) [2013-01]
E05D 3/08
. .
for swing-doors, i.e. openable by pushing from either side [2013-01]
E05D 3/10
. .
with non-parallel pins [2013-01]
E05D 3/12
. .
with two parallel pins and one arm [2013-01]
E05D 3/122
. . .
{Gear hinges} [2013-01]
E05D 3/125
. . .
{specially adapted for vehicles} [2013-01]
E05D 3/127
. . . .
{for vehicle doors} [2013-01]
E05D 3/14
. .
with four parallel pins and two arms [2013-01]
E05D 3/142
. . .
{with at least one of the hinge parts having a cup-shaped fixing part, e.g. for attachment to cabinets or furniture (E05D 11/1021 takes precedence)} [2013-01]
E05D 3/145
. . .
{specially adapted for vehicles} [2013-01]
E05D 3/147
. . . .
{for vehicle doors} [2013-01]
E05D 3/16
. .
with seven parallel pins and four arms [2013-01]
E05D 2003/163
. . .
{Horizontal pivot-axis} [2013-01]
E05D 2003/166
. . .
{Vertical pivot-axis} [2013-01]
E05D 3/18
. .
with sliding pins or guides [2013-01]
E05D 3/183
. . .
{with at least one of the hinge parts having a cup-shaped fixing part, e.g. for attachment to cabinets or furniture} [2013-01]
E05D 3/186
. . .
{Scissors hinges, with two crossing levers and five parallel pins} [2013-01]
E05D 5/00
Construction of single parts, e.g. the parts for attachment [2013-01]
E05D 5/02
.
Parts for attachment, e.g. flaps [2013-01]
E05D 5/0207
. .
{for attachment to vehicles (E05D 5/043, E05D 5/062 take precedence)} [2013-01]
E05D 5/0215
. .
{for attachment to profile members or the like} [2013-01]
E05D 5/0223
. . .
{with parts, e.g. screws, extending through the profile wall or engaging profile grooves} [2013-01]
E05D 5/023
. . . .
{with parts extending through the profile wall} [2013-01]
E05D 5/0238
. . . .
{with parts engaging profile grooves} [2013-01]
E05D 5/0246
. .
{for attachment to glass panels} [2013-01]
E05D 2005/0253
. . .
{the panels having conical or stepped recesses} [2013-01]
E05D 2005/0261
. . .
{connecting two or more glass panels} [2013-01]
E05D 2005/0269
. . . .
{the panels being coplanar} [2013-01]
E05D 5/0276
. .
{for attachment to cabinets or furniture, the hinge having two or more pins (E05D 5/046, E05D 5/065, E05D 7/125 take precedence)} [2013-01]
E05D 2005/0284
. .
{for embedding in concrete or masonry} [2013-01]
E05D 2005/0292
. .
{for passing through insulating layers} [2013-01]
E05D 5/04
. .
Flat flaps [2013-01]
E05D 5/043
. . .
{specially adapted for vehicles} [2013-01]
E05D 5/046
. . .
{specially adapted for cabinets or furniture} [2013-01]
E05D 5/06
. .
Bent flaps [2013-01]
E05D 5/062
. . .
{specially adapted for vehicles} [2013-01]
E05D 5/065
. . .
{specially adapted for cabinets or furniture} [2013-01]
E05D 2005/067
. . .
{gooseneck shaped} [2013-01]
E05D 5/08
. .
of cylindrical shape [2013-01]
E05D 5/10
.
Pins, sockets or sleeves; Removable pins (E05D 15/522 takes precedence) [2013-01]
E05D 2005/102
. .
{Pins} [2013-01]
E05D 2005/104
. . .
{characterised by the materials} [2013-01]
E05D 2005/106
. . .
{with non-cylindrical portions} [2013-01]
E05D 2005/108
. . .
{with elastically deformable parts} [2013-01]
E05D 5/12
. .
Securing pins in sockets, movably or not [2013-01]
E05D 5/121
. . .
{Screw-threaded pins} [2013-01]
E05D 2005/122
. . . .
{externally threaded} [2013-01]
E05D 2005/124
. . . .
{internally threaded} [2013-01]
E05D 5/125
. . .
{Non-removable, snap-fitted pins (removable snap-fitted pins E05D 7/1022, E05D 7/1055)} [2013-01]
E05D 5/127
. . .
{by forcing the pin into the socket (E05D 5/125 takes precedence)} [2013-01]
E05D 5/128
. . .
{the pin having a recess or through-hole engaged by a securing member} [2013-01]
E05D 5/14
. .
Construction of sockets or sleeves [2013-01]
E05D 2005/145
. . .
{with elastically deformable parts} [2013-01]
E05D 5/16
. . .
to be secured without special attachment parts on the socket or sleeve [2013-01]
E05D 7/00
Hinges or pivots of special construction (used for special suspension arrangements E05D 15/00; so as to be self-closing E05F 1/06, E05F 1/12; with means for raising wings before being turned E05F 7/02) [2013-01]
E05D 7/0009
.
{Adjustable hinges (E05D 7/04 takes precedence)} [2013-01]
E05D 7/0018
. .
{at the hinge axis} [2013-01]
E05D 7/0027
. . .
{in an axial direction} [2013-01]
E05D 2007/0036
. . . .
{with axially fixed hinge pins} [2013-01]
E05D 7/0045
. . .
{in a radial direction} [2013-01]
E05D 7/0054
. . . .
{by means of eccentric parts} [2013-01]
E05D 2007/0063
. . . . .
{Eccentric hinge pins} [2013-01]
E05D 2007/0072
. . . .
{with sliding sleeves} [2013-01]
E05D 2007/0081
. . . .
{with swinging or rolling sleeves} [2013-01]
E05D 7/009
.
{Elongate hinges, e.g. piano-hinges} [2013-01]
E05D 7/02
.
for use on the right-hand as well as the left-hand side; Convertible right-hand or left-hand hinges [2013-01]
E05D 7/04
.
Hinges adjustable relative to the wing or the frame [2013-01]
E05D 7/0407
. .
{the hinges having two or more pins and being specially adapted for cabinets or furniture} [2013-01]
E05D 7/0415
. .
{with adjusting drive means} [2013-01]
E05D 7/0423
. . .
{Screw-and-nut mechanisms (E05D 7/0407, E05D 7/043 take precedence)} [2013-01]
E05D 7/043
. .
{by means of dowel attachments} [2013-01]
E05D 2007/0438
. . .
{with bolts fixedly mounted on the hinge part} [2013-01]
E05D 2007/0446
. . .
{with threaded bolts fixedly mounted on the hinge part} [2013-01]
E05D 2007/0453
. . .
{with threaded sleeves} [2013-01]
E05D 2007/0461
. .
{in angular arrangement to the wing or the frame} [2013-01]
E05D 2007/0469
. .
{in an axial direction} [2013-01]
E05D 2007/0476
. .
{Pocket hinges} [2013-01]
E05D 2007/0484
. .
{in a radial direction} [2013-01]
E05D 2007/0492
. .
{in three directions} [2013-01]
E05D 7/06
.
to allow tilting of the members [2013-01]
E05D 7/08
.
for use in suspensions comprising two spigots placed at opposite edges of the wing, especially at the top and the bottom, e.g. trunnions {(E05D 15/266 takes precedence)} [2013-01]
E05D 7/081
. .
the pivot axis of the wing being situated near one edge of the wing, especially at the top and bottom, e.g. trunnions [2013-01]
E05D 7/082
. .
the pivot axis of the wing being situated at a considerable distance from the edges of the wing, {e.g. for balanced wings} [2013-01]
E05D 7/083
. . .
with a fixed pivot axis [2013-01]
E05D 7/084
. . .
with a movable pivot axis [2013-01]
E05D 7/085
. . . .
with two or more pivot axes, e.g. used at the same time [2013-01]
E05D 7/086
. . .
Braking devices structurally combined with hinges (braking devices for windows per se E05F 5/00) [2013-01]
E05D 7/10
.
to allow easy separation {or connection} of the parts at the hinge axis ({E05D 5/12 and E05D 15/50 take precedence } ; substitutes for hinges E05D 1/06) [2013-01]
E05D 7/1005
. .
{by axially moving free pins, balls or sockets} [2013-01]
E05D 7/1011
. . .
{biased by free springs (E05D 7/1016 takes precedence)} [2013-01]
E05D 7/1016
. . .
{requiring a specific angular position} [2013-01]
E05D 7/1022
. . .
{with snap-fitted pins} [2013-01]
E05D 2007/1027
. . .
{by axially moving free pins} [2013-01]
E05D 2007/1033
. . .
{by axially moving free balls} [2013-01]
E05D 2007/1038
. . .
{by axially moving free sockets} [2013-01]
E05D 7/1044
. .
{in an axial direction (E05D 7/1005 takes precedence)} [2013-01]
E05D 7/105
. . .
{requiring a specific angular position} [2013-01]
E05D 7/1055
. . .
{with snap-fitted pins} [2013-01]
E05D 7/1061
. .
{in a radial direction (E05D 7/1005 takes precedence)} [2013-01]
E05D 7/1066
. . .
{requiring a specific angular position} [2013-01]
E05D 7/1072
. . . .
{the pin having a non-circular cross-section} [2013-01]
E05D 7/1077
. . .
{with snap-fitted pins} [2013-01]
E05D 7/1083
. .
{facilitating simultaneous assembly of a plurality of hinges, e.g. for mounting heavy wings} [2013-01]
E05D 2007/1088
. . .
{using hinge pins having different lengths} [2013-01]
E05D 2007/1094
. .
{Guiding devices therefor} [2013-01]
E05D 7/12
.
to allow easy detachment of the hinge from the wing or the frame {(E05D 15/507 takes precedence)} [2013-01]
E05D 7/121
. .
{specially adapted for vehicles} [2013-01]
E05D 7/123
. .
{specially adapted for cabinets or furniture} [2013-01]
E05D 7/125
. . .
{the hinge having two or more pins} [2013-01]
E05D 2007/126
. .
{in an axial direction} [2013-01]
E05D 2007/128
. .
{in a radial direction} [2013-01]
E05D 7/14
.
Hinges for safes [2013-01]
E05D 9/00
Flaps or sleeves specially designed for making from particular material, e.g. hoop-iron, sheet metal, plastics [2013-01]
E05D 9/005
.
{from plastics (E05D 1/02 takes precedence)} [2013-01]
E05D 11/00
Additional features or accessories of hinges {(edge protecting devices E06B 3/88)} [2013-01]
E05D 11/0009
.
{Templates for marking the position of fittings on wings or frames (implements for making doors, windows or frames E04F 21/003)} [2013-01]
E05D 11/0018
.
{Anti-tamper devices} [2013-01]
E05D 11/0027
. .
{arranged on or near the hinge and comprising parts interlocking as the wing closes, e.g. security studs} [2013-01]
E05D 2011/0036
. . .
{near the hinge} [2013-01]
E05D 2011/0045
. . .
{on the hinge} [2013-01]
E05D 11/0054
.
{Covers, e.g. for protection} [2013-01]
E05D 2011/0063
. .
{for screw-heads or bolt-heads} [2013-01]
E05D 2011/0072
. .
{for the gap between hinge parts} [2013-01]
E05D 11/0081
.
{for transmitting energy, e.g. electrical cable routing} [2013-01]
E05D 2011/009
.
{Impact absorbing hinges for vehicle doors} [2013-01]
E05D 11/02
.
Lubricating arrangements [2013-01]
E05D 11/04
.
relating to the use of free balls as bearing-surfaces (E05D 7/06 takes precedence) [2013-01]
E05D 2011/045
. .
{located in line with the hinge axis} [2013-01]
E05D 11/06
.
Devices for limiting the opening movement of hinges [2013-01]
E05D 11/08
.
Friction devices between relatively-movable hinge parts (E05D 7/086 takes precedence) [2013-01]
E05D 11/081
. .
{with both radial and axial friction, e.g. conical friction surfaces} [2013-01]
E05D 11/082
. .
{with substantially radial friction, e.g. cylindrical friction surfaces} [2013-01]
E05D 11/084
. . .
{the friction depending on direction of rotation or opening angle of the hinge} [2013-01]
E05D 2011/085
. . .
{the friction depending on the opening angle} [2013-01]
E05D 11/087
. .
{with substantially axial friction, e.g. friction disks} [2013-01]
E05D 2011/088
. .
{with automatic disengagement} [2013-01]
E05D 11/10
.
Devices for preventing movement between relatively-movable hinge parts [2013-01]
E05D 11/1007
. .
{with positive locking} [2013-01]
E05D 11/1014
. .
{for maintaining the hinge in only one position, e.g. closed} [2013-01]
E05D 11/1021
. . .
{the hinge having two or more pins and being specially adapted for cabinets or furniture} [2013-01]
E05D 11/1028
. .
{for maintaining the hinge in two or more positions, e.g. intermediate or fully open} [2013-01]
E05D 2011/1035
. . .
{with circumferential and evenly distributed detents around the pivot-axis} [2013-01]
E05D 11/1042
. . .
{the maintaining means being a cam and a torsion bar, e.g. motor vehicle hinge mechanisms} [2013-01]
E05D 11/105
. . .
{the maintaining means acting perpendicularly to the pivot axis} [2013-01]
E05D 11/1057
. . . .
{specially adapted for vehicles (E05D 11/1064 takes precedence)} [2013-01]
E05D 11/1064
. . . .
{with a coil spring perpendicular to the pivot axis} [2013-01]
E05D 11/1071
. . . . .
{specially adapted for vehicles} [2013-01]
E05D 11/1078
. . .
{the maintaining means acting parallel to the pivot} [2013-01]
E05D 11/1085
. . . .
{specially adapted for vehicles} [2013-01]
E05D 2011/1092
. .
{the angle between the hinge parts being adjustable} [2013-01]
E05D 13/00
Accessories for sliding or lifting wings, e.g. pulleys, safety catches ({closers or openers for horizontally sliding wings E05F 1/02, E05F 1/08 }; counterbalance devices {for swinging wings } E05F 1/00, E05F 3/00) [2013-01]
E05D 13/003
.
{Anti-dropping devices (E05D 13/1223, E05D 13/1246, E05D 13/1269, E05D 13/1292 take precedence)} [2013-01]
E05D 13/006
. .
{fixed to the wing, i.e. safety catches} [2013-01]
E05D 13/04
.
{Fasteners specially adapted for holding sliding wings open (for holding wings closed E05C)} [2016-11]
E05D 13/06
. .
{with notches for vertically sliding wings} [2016-11]
E05D 13/08
. .
{acting by friction for vertically sliding wings} [2016-11]
E05D 13/10
.
{Counterbalance devices} [2015-10]
E05D 13/12
. .
{with springs} [2015-10]
E05D 13/1207
. . .
{with tension springs} [2013-01]
E05D 13/1215
. . . .
{specially adapted for overhead wings (E05D 13/1223 takes precedence)} [2013-01]
E05D 13/1223
. . . .
{Spring safety devices} [2013-01]
E05D 13/123
. . .
{with compression springs} [2013-01]
E05D 13/1238
. . . .
{specially adapted for overhead wings (E05D 13/1246 takes precedence)} [2013-01]
E05D 13/1246
. . . .
{Spring safety devices} [2013-01]
E05D 13/1253
. . .
{with canted-coil torsion springs} [2013-01]
E05D 13/1261
. . . .
{specially adapted for overhead wings (E05D 13/1269 takes precedence)} [2013-01]
E05D 13/1269
. . . .
{Spring safety devices} [2013-01]
E05D 13/1276
. . .
{with coiled ribbon springs, e.g. constant force springs (E05D 13/1253 takes precedence)} [2013-01]
E05D 13/1284
. . . .
{specially adapted for overhead wings (E05D 13/1292 takes precedence)} [2013-01]
E05D 13/1292
. . . .
{Spring safety devices} [2013-01]
E05D 13/14
. .
{with weights} [2015-10]
E05D 13/145
. . .
{specially adapted for overhead wings} [2013-01]
E05D 15/00
Suspension arrangements for wings (arrangements of wings not characterised by the construction of the supporting means E06B 3/32) [2013-01]
E05D 15/02
.
for revolving wings [2013-01]
E05D 15/04
.
with arms fixed on the wing pivoting about an axis outside of the wing [2013-01]
E05D 15/06
.
for wings sliding horizontally more or less in their own plane [2013-01]
E05D 15/0604
. .
{allowing an additional movement (E05D 15/10 takes precedence; raising wings before sliding E05D 15/565)} [2013-01]
E05D 15/0608
. . .
{caused by track lay-out} [2013-01]
E05D 15/0613
. . . .
{with multi-directional trolleys} [2013-01]
E05D 15/0617
. .
{of cantilever type} [2013-01]
E05D 15/0621
. .
{Details, e.g. suspension or supporting guides (E05D 15/0604, E05D 15/08 - E05D 15/14 take precedence)} [2016-05]
E05D 15/0626
. . .
{for wings suspended at the top} [2013-01]
E05D 15/063
. . . .
{on wheels with fixed axis} [2013-01]
E05D 15/0634
. . . . .
{with height adjustment} [2013-01]
E05D 15/0639
. . . . . .
{by vertical bolts} [2013-01]
E05D 15/0643
. . . .
{on balls or floating rollers} [2013-01]
E05D 15/0647
. . . .
{on sliding blocks} [2013-01]
E05D 15/0652
. . . .
{Tracks (E05D 15/063 - E05D 15/0647 and E05D 15/0656 take precedence)} [2016-05]
E05D 15/0656
. . . .
{Bottom guides} [2013-01]
E05D 15/066
. . .
{for wings supported at the bottom} [2013-01]
E05D 15/0665
. . . .
{on wheels with fixed axis} [2013-01]
E05D 15/0669
. . . . .
{with height adjustment} [2013-01]
E05D 15/0673
. . . . . .
{by vertical bolts} [2013-01]
E05D 15/0678
. . . .
{on balls or floating rollers} [2013-01]
E05D 15/0682
. . . .
{on sliding blocks} [2013-01]
E05D 15/0686
. . . .
{Tracks (E05D 15/0665 - E05D 15/0682 and E05D 15/0691 take precedence)} [2016-05]
E05D 15/0691
. . . .
{Top guides} [2013-01]
E05D 2015/0695
. . .
{Magnetic suspension or supporting means} [2013-01]
E05D 15/08
. .
consisting of two or more independent parts movable each in its own guides [2013-01]
E05D 15/10
. .
movable out of one plane into a second parallel plane [2013-01]
E05D 15/1002
. . .
{specially adapted for use in railway-cars or mass transit vehicles (E05D 15/1007, E05D 15/1023, E05D 15/1044, E05D 15/1068 take precedence)} [2013-01]
E05D 15/1005
. . .
{the wing being supported on arms movable in horizontal planes} [2013-01]
E05D 15/1007
. . . .
{specially adapted for use in railway-cars or mass transit vehicles} [2013-01]
E05D 15/101
. . . .
{specially adapted for vehicles (E05D 15/1007 takes precedence)} [2013-01]
E05D 15/1013
. . . .
{specially adapted for windows} [2013-01]
E05D 15/1015
. . . . .
{with an intermediate tilt position} [2013-01]
E05D 2015/1018
. . .
{with the track rotating around its axis} [2013-01]
E05D 15/1021
. . .
{involving movement in a third direction, e.g. vertically} [2013-01]
E05D 15/1023
. . . .
{specially adapted for use in railway-cars or mass transit vehicles} [2013-01]
E05D 2015/1026
. . .
{accessories, e.g. sliding or rolling guides, latches} [2013-01]
E05D 2015/1028
. . .
{with only the wing moving transversely} [2013-01]
E05D 2015/1031
. . . .
{the wing supported on arms extending from the carriage} [2013-01]
E05D 2015/1034
. . . . .
{the carriage having means for preventing rotation of the wing} [2013-01]
E05D 2015/1036
. . . . .
{the arms being movable in vertical, e.g. transverse, planes} [2013-01]
E05D 2015/1039
. . . .
{the wing sliding transversely on the carriage} [2013-01]
E05D 15/1042
. . .
{with transversely moving carriage (E05D 15/1065 takes precedence)} [2013-01]
E05D 15/1044
. . . .
{specially adapted for use in railway-cars or mass transit vehicles} [2013-01]
E05D 15/1047
. . . .
{specially adapted for vehicles (E05D 15/1044 takes precedence)} [2013-01]
E05D 2015/1049
. . . .
{the carriage swinging or rotating in a transverse plane} [2013-01]
E05D 2015/1052
. . . .
{transversely over-dimensioned track sections or carriage} [2013-01]
E05D 2015/1055
. . . .
{with slanted or curved track sections or cams} [2013-01]
E05D 2015/1057
. . . . .
{the carriage swinging or rotating in those track sections} [2013-01]
E05D 2015/106
. . . .
{transversely orientated track sections} [2013-01]
E05D 2015/1063
. . . .
{disconnecting the carriage from the track} [2013-01]
E05D 15/1065
. . .
{with transversely moving track} [2013-01]
E05D 15/1068
. . . .
{specially adapted for use in railway-cars or mass transit vehicles} [2013-01]
E05D 2015/1071
. . . .
{the track being directly linked to the fixed frame, e.g. slidingly} [2013-01]
E05D 2015/1073
. . . . .
{rocking transversely} [2013-01]
E05D 2015/1076
. . . . .
{swinging transversely, e.g. on arms} [2013-01]
E05D 2015/1078
. . . . .
{swinging or rotating in a horizontal plane} [2013-01]
E05D 15/1081
. . . .
{specially adapted for vehicles (E05D 15/1068 takes precedence)} [2013-01]
E05D 2015/1084
. . . .
{the carriage being directly linked to the fixed frame, e.g. slidingly} [2013-01]
E05D 2015/1086
. . . . .
{swingingly, e.g. on arms} [2013-01]
E05D 2015/1089
. . . . . .
{the carriage having means for preventing rotation of the wing} [2013-01]
E05D 2015/1092
. . . . . .
{the carriage swinging or rotating in curved track sections} [2013-01]
E05D 2015/1094
. . . . . .
{disconnecting itself from the track} [2013-01]
E05D 2015/1097
. . . .
{with the carriage and track forming a telescopic element} [2013-01]
E05D 15/12
. .
consisting of parts connected at their edges [2013-01]
E05D 15/14
. .
with movable arms situated in the plane of the wing [2013-01]
E05D 15/16
.
for wings sliding vertically more or less in their own plane [2013-01]
E05D 15/165
. .
{Details, e.g. sliding or rolling guides (E05D 15/18 - E05D 15/24 take precedence)} [2016-05]
E05D 15/18
. .
consisting of two or more independent parts, movable each in its own guides [2013-01]
E05D 15/20
. .
movable out of one plane into a second parallel plane [2013-01]
E05D 15/22
. .
allowing an additional movement {(E05D 15/20 takes precedence)} [2013-01]
E05D 2015/225
. . .
{specially adapted for overhead wings} [2013-01]
E05D 15/24
. .
consisting of parts connected at their edges [2013-01]
E05D 15/242
. . .
{Hinge connections between the parts} [2013-01]
E05D 15/244
. . .
{Upper part guiding means} [2013-01]
E05D 15/246
. . . .
{with additional guide rail for producing an additional movement} [2013-01]
E05D 15/248
. . . .
{with lever arms for producing an additional movement} [2013-01]
E05D 15/26
.
for folding wings [2013-01]
E05D 15/262
. .
{folding vertically} [2013-01]
E05D 15/264
. .
{for bi-fold wings} [2013-01]
E05D 15/266
. . .
{comprising two pivots placed at opposite edges of the wing} [2013-01]
E05D 2015/268
. .
{the wings being successively folded} [2013-01]
E05D 15/28
.
supported on arms movable in horizontal plane [2013-01]
E05D 15/30
. .
with pivoted arms and sliding guides [2013-01]
E05D 15/32
. .
with two pairs of pivoted arms [2013-01]
E05D 15/34
. . .
with wings opening parallel to themselves [2013-01]
E05D 15/36
.
moving along slide-ways so arranged that one guide-member of the wing moves in a direction substantially perpendicular to the movement of another guide member [2013-01]
E05D 15/38
. .
for upwardly-moving wings, e.g. up-and-over doors [2013-01]
E05D 15/40
.
supported on arms movable in vertical planes [2013-01]
E05D 15/401
. .
{specially adapted for overhead wings (E05D 15/403 - E05D 15/46 take precedence)} [2016-05]
E05D 15/403
. .
{with arms fixed on the wing pivoting about an axis outside the wing} [2013-01]
E05D 15/405
. .
{with curved arms fixed on the wing, rolling on a support} [2013-01]
E05D 15/406
. .
{with pivoted arms and sliding guides (E05D 15/42, E05D 15/44 take precedence)} [2013-01]
E05D 15/408
. . .
{with sliding guides fixed to the wing} [2013-01]
E05D 15/42
. .
with pivoted arms and horizontally-sliding guides [2013-01]
E05D 15/425
. . .
{specially adapted for overhead wings} [2013-01]
E05D 15/44
. .
with pivoted arms and vertically-sliding guides [2013-01]
E05D 15/445
. . .
{specially adapted for overhead wings} [2013-01]
E05D 15/46
. .
with two pairs of pivoted arms [2013-01]
E05D 15/463
. . .
{specially adapted for overhead wings} [2013-01]
E05D 15/466
. . .
{specially adapted for windows} [2013-01]
E05D 15/48
.
allowing alternative movements ({E05D 15/0604 takes precedence } ; for vertically-sliding wings E05D 15/22) [2013-01]
E05D 2015/482
. .
{for panic doors} [2013-01]
E05D 2015/485
. .
{Swinging or sliding movements} [2013-01]
E05D 2015/487
. .
{Tilting or swinging movements} [2013-01]
E05D 15/50
. .
for opening at either of two opposite edges {(hinges or pivots of special construction to allow easy separation or connection of the parts at the hinge axis E05D 7/10; to allow easy detachment of the hinge from the wing or the frame E05D 7/12)} [2013-01]
E05D 15/502
. . .
{by axial separation of the hinge parts at the hinge axis} [2013-01]
E05D 15/505
. . .
{by radial separation of the hinge parts at the hinge axis} [2013-01]
E05D 15/507
. . .
{by detachment of the hinge from the wing or the frame} [2013-01]
E05D 15/52
. .
for opening about a vertical as well as a horizontal axis [2013-01]
E05D 15/5202
. . .
{with non-horizontally extending checks} [2013-01]
E05D 15/5205
. . .
{with horizontally-extending checks} [2013-01]
E05D 15/5208
. . .
{with means for transmitting movements between vertical and horizontal sliding bars, rods or cables} [2013-01]
E05D 15/5211
. . .
{Concealed suspension fittings} [2013-01]
E05D 15/5214
. . .
{Corner supports} [2013-01]
E05D 15/5217
. . .
{Tilt-lock devices} [2013-01]
E05D 15/522
. . .
with disconnecting means for the appropriate pivoting parts [2013-01]
E05D 15/523
. . . .
using movable rods [2013-01]
E05D 15/524
. . . . .
Actuating mechanisms [2013-01]
E05D 15/526
. . .
Safety devices {(E05D 15/5217 takes precedence)} [2013-01]
E05D 2015/5263
. . . .
{acting parallel to the plane of the wing} [2013-01]
E05D 2015/5266
. . . .
{acting perpendicular to the plane of the wing} [2013-01]
E05D 15/54
. .
for opening both inwards and outwards [2013-01]
E05D 15/56
.
with successive different movements {(raising wings before being turned E05F 7/02)} [2013-01]
E05D 15/565
. .
{for raising wings before sliding} [2013-01]
E05D 15/58
. .
with both swinging and sliding movements [2013-01]
E05D 15/581
. . .
{the swinging axis laying in the sliding direction (E05D 15/1015 takes precedence)} [2013-01]
E05D 15/582
. . .
{with horizontal swinging axis (E05D 15/581 takes precedence)} [2013-01]
E05D 15/583
. . . .
{specially adapted for overhead wings} [2013-01]
E05D 2015/585
. . .
{with stationary hinge parts} [2013-01]
E05D 2015/586
. . .
{with travelling hinge parts} [2013-01]
E05D 2015/587
. . .
{with axially separating hinge parts} [2013-01]
E05D 2015/588
. . .
{with radially separating hinge parts} [2013-01]
E05D 2700/00
Hinges or other suspension devices especially for doors or windows [2013-01]
E05D 2700/02
.
Hinges with one pivot axis and one bearing surface [2013-01]
E05D 2700/04
.
Hinges with one pivot axis and more than one bearing surface [2013-01]
E05D 2700/10
.
Various door and window fittings, e.g. suspension devices for double hung windows or screens [2013-01]
E05D 2700/12
.
Suspension devices for doors or windows movable in a direction perpendicular to their plane or pivotable about an axis being situated at a considerable distance from the edge of the wing by means of pivot arms [2013-01]