40

With bending or folding of facing sheet

41

With water-proofing with added material

42

With embedding of reinforcing material during or subsequent to core formation

43

Pore forming in situ

44

With preliminary treatment of facing sheet

45

With subsequent treatment of plaster board

48

With filling of void or cavity with fluent material

49

Splicing

50

With mechanical working of conductor

51

Covering of conductor

61

Simulated products of nature

62

With manual drawing or engraving

62.2

With formation of lamina by bulk deposition of discrete particles to form self-supporting article

63

Manually arranging different colored or shaped discrete elements to form design

64

With measuring, testing, or inspecting

65

Of multiple spaced elements between and transverse of parallel webs (e.g., Venetian blind ladders)

66

Adhesive application of fasteners to articles (e.g., slide fastener to garment)

67

Utilizing phosphorescent or fluorescent material

68

With fur removal from animal pelt

69

Application of end closures to containers

70

Encasing movable or loosely confined element between adhering lamina (e.g., drawstrings)

71

Of lamina to building or installed structure

72

Setting or embedding tufts or discrete pile elements onto backing (e.g., rugs, brushes, etc.)

73.1

With sonic or ultrasonic treatment

73.5

Friction treatment (e.g., welding)

73.6

Vibratory treatment

74

With application of centrifugal force

75

With balancing of product

76

With parchmentizing or transparentizing

77

With pore forming in situ to form cellular lamina

80

With refrigeration or freezing

81

With melting or gasification of permanently associated solid material in situ in airtight cavity

82

With flame contact of lamina

83

With swelling of material of lamina

84

With shrinking of material of lamina

87

Providing escapeways for gases trapped or generated between layers

88

Fray-prevention by bonding

89.11

With vitrification or firing ceramic material

90

Utilizing layer to prevent migration or bleeding between laminae

91

With separate permanent mechanical joining means (riveted, sewed, stapled, etc.)

94

Reclaiming, renewing or repairing articles for reuse

99

Optically transparent glass sandwich making (e.g., window or filter)

108

Mounting transparent lamina over window opening (e.g., slide-mounting)

109

Multipane glazing unit making (e.g., air-spaced panes)

110.1

Making flexible or resilient toroidal shape; e.g., tire, inner tube, etc.

136

Tire bead ring making

137

Flexible endless drive belt making

143

Helical wire or plural ring reinforced flexible tube making

145

With encapsulating of permanently fluent material in hollow or porous lamina or filling of space between adhered laminae

148

With weaving, knitting, braiding, twisting or needling

150

With electro-deposition

152

With temporary disassembling and subsequent bonding of same laminae

153

With abrading or grinding of lamina

155

With destruction of solid transitory material; e.g., dissolving, melting, etc.

156

With fluid pressure to prevent collapse of hollow structure during assembly and/or joining

157

Joining indefinite length laminae end-to-end

160

Bonding in stressed condition of at least one prestressed element

166

Bonding of flexible filamentary material while in indefinite length or running length

182

Of at least two bonded subassemblies

183

With creping, wrinkling, crinkling

184

With winding of web or sheet

196

With permanent bending or reshaping or surface deformation of self sustaining lamina

228

Of preshaped laminae between closed similarly shaped press platens or clamps

229

With stretching

230

Direct contact transfer of adhered lamina from carrier to base

242

With lamina formation by molding or casting

247

With stripping of adhered lamina

250

With cutting, punching, tearing or severing

272.2

With direct application of electrical, magnetic, or radiant energy to work

276

With mass application of nonadhesive fibers or particles between laminae

277

With printing

278

With coating of nonadherent face of lamina

281

Combined; e.g., with cleaning, etc.

282

Simultaneous heating and cooling

283

Adhesive applied as dry particles

285

Direct application of vacuum or fluid pressure during bonding

288

Simultaneous pressure application to at least two separate sandwiches

289

Utilizing parting or release material to prevent adhesion

290

Bonding of facing continuously contacting laminae at spaced points only

292

Of laminae having opposed facing areas out of contact

293

Inserting of lamina in hole, aperture or recess of other lamina and adherence to side walls thereof

295

Adhesive applying to restricted area and spreading thereof by assembly pressure

296

Strands, rods, tubes or sticklike bodies to each other only

297

Of discrete laminae to single face of additional lamina

303.1

Inserting lamina into preformed plastic body

304.1

Butt edge joining of laminae

305

By applying after assembly an adhesive, solvent or chemical activating agent

306.3

By pressure or drying only, without tack; e.g., for easy delamination, etc.

306.6

Using single, preformed, diverse bonding lamina between other laminae

307.1

By curing of nonfully polymerized self-sustaining lamina

308.2

By tackifying substance of self-sustaining lamina to be bonded; e.g., autogenous bonding, etc.

310

Of laminae having a different coating on at least two mating surfaces

311

Sequential heating and cooling during pressure applying

312

Sequential different pressure applying

313

Interposing intermediate laminate between non-coated laminae

314

Sequentially applying different liquids or liquefiable materials to adhering face of lamina

320

Heating of dry adhesive on lamina prior to assembly contact

321

Heating adhesive by contacting with heated lamina

322

Heating lamina prior to assembly or adhesive applying

323

Interposing subsequently removed flexible element between lamina and a pressure applying surface

324

Running or continuous webs of indefinite length

324.4

By tackifying a single lamina of intermediate laminate

325

Particular adhesive

702

Delaminating process responsive to feed or shape at delamination

703

Using solvent during delaminating (e.g., water dissolving adhesive at bonding face during delamination, etc.)

705

Using vibration during delaminating

706

Using direct fluid current against work during delaminating

709

Changing dimension during delaminating (e.g., crushing, expanding, warping, etc.)

711

Temperature change for delamination (e.g., heating during delaminating, etc.)

714

Gripping and pulling work apart during delaminating

719

Delaminating from release surface

345.12

With mechanical polishing (i.e., CMP-chemical mechanical polishing)

345.15

With measuring, sensing, detection or process control means

345.18

With means to supply, remove, or recycle liquid etchant outside of etching tank or chamber (e.g., supply tanks or pipe network)

345.19

With mechanical mask or shield or shutter for shielding workpiece

345.2

Running length workpiece (e.g., etching indeterminate length strip)

345.21

Liquid etchant spray type

345.22

With plural etching zones for a single discrete workpiece in apparatus

345.23

With specified workpiece support

345.25

For endpoint detection

345.26

For detection or control of pressure or flow of etchant gas

345.27

For temperature detection or control

345.28

For detection or control of electrical parameter (e.g., current, voltage, resistance, power, etc.)

345.32

With robot arm connected by doors to plural other chambers (i.e., cluster tool)

345.34

Showerhead-type

345.36

By microwave

345.42

With magnetic field generating means for control of the etchant gas

345.44

Electrically coupled to a power supply or matching circuit

345.45

Including more than two electrodes (e.g., triode reactors)

345.46

With magnetic field generating means for control of the etchant gas

345.47

Parallel plate electrodes

345.49

With magnetic field generating means for control of the etchant gas

345.52

With means to heat the workpiece support

345.53

With means to cool the workpiece support

345.54

With means to move the workpiece inside the etching chamber

351

Plural interrelated sensing means

352

To stop operation of complete machine

353

Of cutter

356

Of application of fluent material to work

358

Of application of bonding pressure

359

Of temperature and/or motion of heat exchange means

360

Means responsive to weight or dimension

361

Of feed or motion of indefinite length work or transfer carrying tape

362

Of feed of articles to assembly station

368

For starting or stopping machine operation

379.7

To an electrically conductive lamina or component incorporated into the work

379.8

With means to assemble laminae or position them relative to each other

380.6

With electrode having a mechanical function; e.g., pressing, etc.

380.9

With radiant heater not touching work