Subclass |
| Title |
ClassTitle
|
| ===>
HORIZONTALLY SUPPORTED PLANAR SURFACES
|
| | |
1 | | TILTABLE SURFACES |
2 | | . Biased |
3 | | . Sectional |
4 | | . About plural axes |
5 | | . With horizontal adjustment |
6 | | . Pivotally adjustable about horizontal axis |
7 | | . . Mechanical actuator tilts surface |
8 | | . . Oppositely tiltable with respect to horizontal plane |
9 | | . . Surface adjusting link spaced from axis |
10 | | . . . Vertically adjustable axis |
11 | | CONVERTIBLE |
12 | | . Reorientatable support |
13 | | . Alternately usable surfaces |
14 | | . Receptacle |
15 | | . Vertical surface |
16 | | . Rack support |
17 | | . Multiplanar to coplanar position |
18 | | . Support becomes inoperative |
19 | | . . Alternately usable legs |
20 | | POWER DRIVEN |
21 | | . Intermittent drive |
22 | | . Along circuitous path |
23 | | WITH ILLUMINATION MEANS |
24 | | WITH DRAIN |
25 | | WITH RECEPTACLE |
26 | | . Detachable or relatively movable |
26.2 | | . . Inkwell |
27 | | WITH PERIPHERAL GUARD |
28 | | WITH DIVERSE SUPPORT FOR ARTICLES |
29 | | . Rod or bar |
30 | | . . Hook |
31 | | . . Superposed |
32 | | . Inclined surface |
33 | | WITH HOUSING |
34 | | . Formed by collapsible surface |
35 | | . . Surface and support pivotally interconnected |
36 | | . . . Paired legs |
37 | | . Counterbalanced surface |
38 | | . Surface forms closure |
39 | | . Surface adjusts to plural operative positions |
40 | | . Surface slidably hinged to housing wall |
41 | | . Formed from support |
42 | | WITH STRUCTURAL INSTALLATION |
43 | | . Body related |
44 | | . Vehicle supported |
45 | | . . Instrument panel |
46 | | . . Support enters window recess |
47 | | . On top and side of upright wall |
48 | | . Having wall and floor relationship |
49 | | . Bed supported |
50.01 | | . WITH MACHINE (I.E., TYPEWRITER, COPY MACHINE, ETC.) |
50.02 | | . HAVING MEANS FOR SUPPORTING AN ELECTRICAL COMPONENT (E.G., WIRE, OUTPUT JACK, ETC.) |
50.11 | | COMBINED |
50.12 | | . With umbrella structure |
50.13 | | . With heating or air moving means |
50.14 | | . With head, arm, leg, or foot rest |
50.15 | | . With mirror |
50.16 | | . With walker |
50.17 | | . With a roll |
50.18 | | . With liquid conduit or gas duct |
51.11 | | INDUSTRIAL PLATFORM |
51.3 | | . Formed from folded semirigid material (e.g., cardboard, etc.) |
52.1 | | . Handler entry between load and support |
53.1 | | . Stacking |
53.3 | | . . Nesting |
53.5 | | . . Tiering |
54.1 | | . Adjustable |
55.1 | | . With load-confining means |
55.3 | | . . Support surface having article-engaging projection or recess |
55.5 | | . . Means for receiving load holddown means |
56.1 | | . Knockdown or setup |
56.3 | | . . Support element attachable to or separable from support surface |
57.1 | | . Invertible |
57.12 | | . Including shock-absorbing means |
57.13 | | . For supporting a barrel |
57.14 | | . Wire pallet |
57.15 | | . Including a roller or track contacting area |
57.16 | | . Load-contacting surface having upwardly projected edge |
57.17 | | . Load-contacting surface having parallel spaced-apart support members |
57.18 | | . . Corrugated or grooved support members |
57.19 | | . . Support members interlock with parallel crossing stringers by notched joints |
57.2 | | . . Including elongated binding means extending perpendicular to and engaging upper surface of support members (e.g., flange, strap, etc.) |
57.21 | | . Load-contacting surface having parallel support members in juxtaposed position |
57.22 | | . . Tubular or channel-shaped support members |
57.23 | | . . Including one-piece elongated channel bar engaging upper and lower surfaces of support members |
57.24 | | . . Including elongated angle bar having horizontal flange engaging upper surface of support members |
57.25 | | . Having plastic load-contacting surface |
57.26 | | . . Formed by joining mating spacers of identical pallet halves together |
57.27 | | . . Load-contacting surface formed by bonded plastic sheets |
57.28 | | . . One-piece molded pallet |
57.29 | | . Having corrugated, grooved, or notched load-contacting surface |
57.3 | | . . One-piece bent sheet metal |
57.31 | | . Including tubular support |
57.32 | | . Metal load-contacting surface |
57.33 | | . Having support spacer between a load-contacting surface and a base member |
57.34 | | . Laminated load-contacting surface |
59 | | PLURAL RELATED HORIZONTAL SURFACES |
60 | | . With partition |
61 | | . . Horizontally adjustable |
62 | | . Invertible surface |
63 | | . . Superposed sections convert to coplanar sections |
64 | | . Laterally connected individual units |
65 | | . Coplanar extension surface |
66 | | . . Circular segment |
67 | | . . Flexible material or hingedly interconnected slats or panels |
68 | | . . . Guided in arcuate path |
69 | | . . End leaf |
70 | | . . . Surface lowers into coplanar position with leaf |
71 | | . . . Elevating mechanism |
72 | | . . . . Link |
73 | | . . . . Cam and slide |
74 | | . . . . . Also moves principal surface |
75 | | . . . . . Cam slot |
76 | | . . . Elevatable |
77 | | . . . Dropleaf |
78 | | . . . . Leaf supports move in plane parallel to primary surface |
79 | | . . . . . Supports include leg |
80 | | . . . . Diagonal brace |
81 | | . . . . . Toggle type |
82 | | . . . . . With trip mechanism |
83 | | . . Intermediate leaf |
84 | | . . . Elevating mechanism |
85 | | . . . . Responsive to end section movement |
86 | | . . . Concealed in stored position |
87 | | . . . With equalizer for opposed end section movement |
88 | | . . . Divided pedestal supports end sections |
89 | | . . . End sections secured mutually or to insert |
90 | | . Detachable enlarging or substitute surface |
91 | | . Nested or stacked units |
92 | | . Terraced |
93 | | . . One surface concealed beneath another surface |
94 | | . . Rotatable |
95 | | . . . Vertically adjustable |
96 | | . . Vertically adjustable |
97 | | . . Detachable surface clamped to stationary surface |
98 | | . . . Clamping leg |
99 | | . . Folding |
100 | | . . . Opposite edges of surfaces vertically aligned |
101 | | . . With separable components |
102 | | . Horizontally adjustable |
103 | | . . Rotatable about vertical axis |
104 | | . . . Inner section rotates relative to fixed outer section |
105 | | . . . Vertically adjustable |
106 | | . Vertically adjustable |
107 | | . . Removably mountable in plural positions |
108 | | . . . Cantilever support |
109 | | . . . . Support members face each other |
110 | | . . . Interlocked with surface configuration of support |
162 | | . Foldable component |
163 | | . . Surfaces comprise plural bars |
164 | | . . Superjacent support |
165 | | . . Integrally formed from sheet |
166 | | . . Hinged horizontal surfaces |
167 | | . . . Folded along lateral center line |
168 | | . . . . With latch |
169 | | . . . . Leg collapses between surface sections |
170 | | . . . . Surface section collapses between legs |
171 | | . . . Folded along longitudinal center line |
172 | | . . . . With latch |
173 | | . . . Leg and surface sections collapse concurrently |
174 | | . . . . Leg collapses between surface sections |
175 | | . . . . Surface section collapses between legs |
176 | | . . Support structure includes leg |
177 | | . . . With caster |
178 | | . . . . Pairs of legs pivotally connected at their top ends and diverging downwardly |
179 | | . . Horizontal surface pivotally connected to support |
180 | | . Separable component |
181 | | . . Surfaces comprise plural bars |
182 | | . . Superjacent support |
183 | | . . Vertically spaced circular surfaces |
184 | | . . Transparent surface |
185 | | . . Laterally interconnected coplanar surfaces |
186 | | . . Support structure includes leg |
187 | | . . . Horizontal brace connecting legs |
188 | | . . . Diagonal brace connecting legs |
189 | | . . . With caster |
190 | | . . . Sectional legs |
191 | | . . . Single pedestal |
192 | | . . . Leg attached at surface corner by clamping means |
193 | | . . . Surface detachably connected to vertical side frames |
115 | | FOLDING |
116 | | . With vertical adjustability |
117 | | . . Sliding pivot connects surface and support |
118 | | . Mutually pivoted crossed legs support surface |
119 | | . . Surface pivoted to one, separably supported on other |
120 | | . . Sliding pivot connects surface and leg |
121 | | . All legs pivot toward common surface edge |
122 | | . . On common axis |
123 | | . . Conjointly actuated by interconnected brace |
124 | | . Surface separably supported by means spaced from fixed pivot |
125 | | . Legs pivot perimetrically of surface |
126 | | . . Conjointly |
127 | | . Legs pivotally converge toward surface center |
128 | | . Folding arms support surface |
129 | | . Legs fold axially parallel to surface edges |
130 | | . . Paired legs conjointly actuated |
131 | | . . Releasable means holds paired legs in predetermined position |
132 | | . . . Legs folded adjacent surface |
133 | | . . . Spring biased |
134 | | . Laterally attached surface |
135 | | . . Detachable assembly |
136 | | BIASED SURFACE |
137 | | HORIZONTALLY ADJUSTABLE |
138 | | . Concurrent horizontal and vertical movements |
139 | | . Rotates about vertical axis |
140 | | . . And moves lineally |
141 | | . . Vertically adjustable |
142 | | . . With means to limit or inhibit rotation |
143 | | . Mounted on slide-and-guide |
144.11 | | VERTICALLY ADJUSTABLE |
145 | | . Articulated link shifts surface |
146 | | . With biased holding means; e.g., latch |
147 | | . With force-multiplying means |
147.11 | | . Shelf type |
147.12 | | . . Including means for securing a corner of shelf to a vertical tubular post |
147.13 | | . . . Including corner sleeve |
147.14 | | . . . Including corner clamp |
147.15 | | . . Attached to corner post |
147.16 | | . . Having shelf-supporting means mounted between parallel spaced-apart upright walls |
147.17 | | . . Including shelf supporting bracket |
147.18 | | . By clamping assembly |
147.19 | | . By telescoping |
147.2 | | . . And pivoting |
147.21 | | . . Including fastening means passing through registered openings |
147.22 | | . By pivoting a leg |
148 | | . Holding means cooperates with smooth face |
149 | | SUPPORTING STRUCTURE EXTENDS UPWARDLY OF SURFACE |
150 | | PEDESTAL SUPPORTED |
151 | | SURFACE MEMBER EMBRACES SUPPORT |
152 | | ATTACHED LATERALLY OF SUPPORT |
153.1 | | WITH SEPARABLE COMPONENTS |
154 | | . Surface and support interlocked by spaced detachable constrainer |
155 | | . Surface secured to leg-connecting parallel member |
156 | | . Independent legs support surface |
157.1 | | . Surface separable from support entity |
157.11 | | . . Attachable to armchair |
157.12 | | . . Detachable ironing board |
157.13 | | . . Detachable shelf-type |
157.14 | | . . Formed from folded semi-rigid material (e.g., cardboard, fibrous paper material, etc.) |
157.15 | | . . Table top having downwardly extended edge for directly contacting with and securing to an end of support entity |
157.16 | | . . Table top having notch means for receiving projection from support entity |
157.17 | | . . Table top solely connected to support entity by its own weight |
157.18 | | . . Support entity having means with opposite members (e.g., slot, groove, clamping means, etc.) for holding an edge of table top therebetween |
159 | | . . Surface vertically removable, horizontally immovable |
159.11 | | . . By latch or clamping means |
159.12 | | . . Including folding legs |
158 | | . . Threaded connection |
158.11 | | . Having means to detachably connect a tubular component to another component |
158.12 | | . Separable components connected together by interlocking parts (e.g., groove and tongue, etc.) |
158.13 | | . Separable components connected together by clamping means |
160 | | SURFACE WITH BRACED HINGED LEG |
161 | | MISCELLANEOUS |
| | ****************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ****************************** |
901 | | SYNTHETIC PLASTIC INDUSTRIAL PLATFORM (E.G., PALLET, ETC.) |
902 | | . Made with deformable integral fastening elements |
| | ********************************* |
| | FOREIGN ART COLLECTIONS |
| | ********************************* |
| | Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collection listed below. These collections contain ONLY foreign patents or nonpatent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived |
FOR 100 | | COMBINED (108/50) |
FOR 101 | | INDUSTRIAL PLATFORM (108/51.1) |
FOR 102 | | VERTICALLY ADJUSTABLE (108/144) |
FOR 103 | | WITH SEPARABLE COMPONENTS (108/153) |
FOR 104 | | . Surface separable from support entity (108/157) |