|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 417 | PUMPS |
Click here for a printable version of this file |
1 | CONDITION RESPONSIVE CONTROL OF PUMP DRIVE MOTOR |
2 | Plural pumps having separate drive motors, supply sources, or delivery destinations |
9 | By stopping pump in response to leakage into or from system |
10 | By controlling starter motor for internal combustion engine |
11 | By controlling free piston internal combustion engine |
12 | Having timer or delay means |
13 | Responsive to pump lubricant, sealant, or coolant condition |
14 | Having ambient condition responsive means |
15 | With control of pump drive transmission |
16 | With plural separate drive motors for single pump unit |
17 | With plural separate drive motor controlling elements |
18 | Single motor control element responsive to means sensing diverse conditions |
19 | Sensing both inlet and outlet conditions |
20 | One condition is rate of flow to or from pump |
21 | One is motive fluid condition of fluid drive motor |
22 | One condition is speed of pump |
25 | Relatively movable elements sensing same system pressure for single control element |
26 | With condition responsive control of pump fluid valve |
27 | Having independent means for delaying valve actuation |
28 | Fluid and motor controls have common sensing element |
29 | Fluid and motor controls separately responsive to diverse conditions |
32 | Responsive to pump or pump fluid temperature |
33 | Pump stop control means requiring manual reset |
34 | By controlling internal combustion drive engine |
35 | By controlling wind motor in response to liquid accumulation |
36 | Responsive to accumulation of pumped liquid in receiver |
37 | By movable liquid receptacle |
38 | By liquid pressure sensor |
39 | With motive fluid supply communicating with liquid receiver |
40 | By float |
42 | In response to pump speed |
43 | Responsive to change in rate of pump fluid flow |
44.1 | By control of electric or magnetic drive motor |
45 | By changing electrical characteristic of motor or motor circuit |
44.2 | Responsive to pump fluid pressure |
44.4 | Low pressure stops motor from turning on pump |
44.5 | Mercury switch |
44.6 | Dial-type sensor |
44.7 | Bellow-type sensor |
44.8 | Piston-type sensor |
44.9 | Diaphragm |
44.3 | Inlet pressure |
44.11 | Responsive to change in electrical operating characteristic |
46 | By controlling drive motor motive fluid |
48 | ELECTRICAL OR GETTER TYPE |
52 | EXPANSION AND CONTRACTION OF PUMP FLUID |
53 | PROCESSES |
56 | DRILLED WELL FREE PISTON-TYPE PUMP |
57 | Having condition or position responsive control of pump discharge flow path |
58 | Having condition or position responsive control of motive fluid supply |
59 | Radially expansible piston portion controls pump and motor chamber intercommunication |
60 | Mechanically actuated valve carried by piston |
61 | BUOYANTLY SUPPORTED |
62 | ALTERNATE SERIES OR PARALLEL OPERATION OF PLURAL PUMPS |
63 | WITH SIGNAL, INDICATOR, OR INSPECTION MEANS |
64 | GAS PRESSURE EXCHANGE USING ROTARY CELLULAR CONVEYOR |
65 | ONE FLUID PUMPED BY CONTACT OR ENTRAINMENT WITH ANOTHER |
66 | Contact or entrainment within rotary impeller |
67 | Passage in impeller shaft for pumped or motive fluid |
68 | Liquid ring |
70 | Peripheral motive fluid inlet |
71 | Axial inlet for pumped fluid |
73 | By ignition of motive fluid |
76 | Jet pump with motive fluid generating pump |
77 | Recirculation of separated motive fluid |
78 | Entrainment at exit of impeller |
79 | Jet delivers back to generating pump |
84 | Rotary nonexpansible chamber-type generating pump |
85 | Diverse pumps |
92 | Liquid piston |
93 | Moving contracting chamber |
94 | Helical chamber |
95 | Movement of chamber cyclically controls flow of liquid into chamber for cyclic operation |
96 | Liquid supporting chambers move liquid to pump fluid |
97 | Relatively movable chambers |
98 | Reciprocating |
99 | Mercury piston |
100 | Tide or wave |
101 | Piston level responsive control for cyclic operation |
103 | Plural chambers |
104 | Momentum piston |
105 | By condensation of motive fluid |
108 | Aerated column |
109 | Valved gas inlet |
110 | With pumped fluid velocity or flow responsive valve operating means |
111 | Plural serially actuated valves |
112 | With flexible pressure responsive sensing element (i.e., bellows, diaphragm, etc.) |
114 | With pilot valve |
115 | Valve member actuated responsive to absolute gaseous motive fluid pressure or flow rate |
116 | Controlled by means responsive to liquid level accumulation in column |
117 | Valve biased open by static pressure of pumped fluid |
118 | Liquid pumped by supplying or exhausting gaseous motive fluid to or from pumping chamber |
119 | Motive fluid pumped by contact with a liquid |
120 | With condition responsive control of motive fluid vacuum or pressure generating means |
121 | Serially connected pumping chambers |
122 | Alternate pumping from plural pumping chambers |
126 | With float actuated control means |
127 | Plural floats in single pumping chamber |
128 | With intermediate pilot valve |
129 | With intermediate electrical actuating means |
130 | Control of motive fluid inlet (e.g., atmosphere, etc.) |
134 | Control of motive fluid outlet |
137 | Cyclic pumping |
138 | Control by liquid level sensing means |
139 | Control by condition of pumped fluid |
140 | Movable pumping chamber |
141 | Responsive to flow of pumped fluid |
142 | Responsive to pumped fluid pressure |
143 | Motive fluid supply or exhaust valve responsive to motive fluid pressure |
144 | Correlated motive fluid valve and pressure or vacuum generating means |
145 | Correlated supply - exhaust of motive fluid or vacuum generating means |
148 | With vacuum generator |
150 | Gravity flow motive fluid |
151 | Jet |
152 | Vapor condensation vacuum diffusion type |
153 | With cooling or heat insulation means |
154 | Vertical stack from generator with reverse flow nozzle |
155 | Flue type |
158 | With motive fluid generator |
160 | Cleaning by separate fluid or diverted motive fluid |
161 | Radial disc-type motive fluid jet |
162 | Interrelated overflow and motive fluid valves |
163 | Successive introduction of motive fluid |
164 | With interstage cooling |
165 | Individually controlled motive fluid flows |
167 | Central and peripheral motive fluid supply |
168 | One motive fluid flow surrounds nozzle tube of another |
169 | Laterally spaced parallel motive fluid flows |
170 | In-line motive fluid flows |
171 | Tangential motive fluid supply (i.e., vortex type) |
172 | Concentric reverse flow motive fluid and discharge conduits |
173 | With cooling |
174 | Successive entrainment of pumped fluid |
175 | With priming or overflow removal jet |
176 | Parallel entrainments with separate combining tubes |
177 | Annular motive fluid stream entrains pumped fluid outside and inside |
178 | Selectively usable flow confining members (e.g., nozzles, combining tubes, etc.) |
179 | Plural motive fluid jets or sources for single entrainment |
181 | Faucet or flexible hose attached |
182 | Regulation |
182.5 | Liquid level responsive |
183 | By position of nozzle relative to combining tube |
185 | With main line downstream control |
186 | By bypassing motive fluid from nozzle |
187 | By controlling motive fluid |
190 | Pumped fluid inlet valve |
192 | Pressure controlled overflow |
194 | With means to whirl pumped fluid |
195 | Specific material |
196 | Expressed mathematically or dimensionally |
197 | Peripheral motive fluid supply |
198 | Specific motive fluid nozzle |
199.1 | DIVERSE PUMPS |
199.2 | Priming and venting |
200 | Priming with liquid level responsive control |
201 | Including rotary nonexpansible chamber type |
204 | Moving partition or cylinder of rotary pump forms or actuates reciprocating pump |
205 | Series |
207 | BY HEATING OF PUMPED FLUID |
210 | PUMP FLUID BIASED OVERCENTER LOAD EQUALIZER |
211 | INERTIA-TYPE PUMPING MEMBER OR DRIVE MEANS |
211.5 | LIQUID LEVEL RESPONSIVE CONTROL OF DISPLACEMENT, VOLUMETRIC CAPACITY, OR DRIVE TRANSMISSION |
212 | CONDITION RESPONSIVE CONTROL OF DRIVE TRANSMISSION OR PUMP DISPLACEMENT |
213 | Having condition responsive pumped fluid control |
214 | Having means to hold or resist movement of pumping element |
215 | By changing phasing of plural pistons in single chamber |
216 | Plural pumps with individual or relative control |
217 | Reversible flow pump |
218 | Adjustable cam or linkage |
223 | Disconnectable drive element (e.g., clutch, belt, shifter, etc.) |
225 | INTENSIFIER |
228 | WITH CONDITION RESPONSIVE CONTROL OF COOLANT OR LUBRICANT |
229 | OPERATED BY ART DEVICE |
234 | AMBULANT, BODY SUPPORTED, OR WITH CARRYING HANDLE |
236 | CONVERTIBLE TO APPARATUS OF A DIFFERENT CLASS |
238 | CHANGEABLE BY ASSEMBLY OR DISASSEMBLY |
240 | INERTIA LIQUID PISTON (E.G., MOMENTUM, ETC.) |
242 | POSITION RESPONSIVE BYPASS BETWEEN PLURAL PUMP CHAMBERS |
243 | WITH INTERCOOLER |
244 | SUCCESSIVE STAGES |
245 | Fluid motor for one stage supplied from another stage |
246 | Stages driven by relatively movable motor working members |
248 | Parallel stages to or from single stage |
249 | Prior stage delivers to atmospheric chamber |
250 | With interstage intake or additional inlet to latter stage |
251 | With interstage discharge or additional discharge from former stage |
253 | Condition responsive control of fluid |
254 | Reciprocating rigid stages |
255 | Crankcase forms stage or interstage flow path |
256 | Stages comprise oppositely moving valved pumping members |
258 | Reciprocating cylinder and piston |
259 | Including valved piston |
260 | Piston forms or carries inlet and outlet valve for one stage |
261 | Serial interstage distributors in piston |
262 | Valve in piston is first stage inlet valve |
263 | With additional pumping member in parallel flow path |
264 | Fluid motor driven |
265 | Relatively movable |
266 | Three or more |
267 | Series double acting |
268 | Unidirectionally acting rigidly connected pumping members |
269 | THREE OR MORE CYLINDERS ARRANGED IN PARALLEL, RADIAL, OR CONICAL RELATIONSHIP WITH ROTARY TRANSMISSION AXIS |
270 | Condition responsive fluid control |
271 | Motor driven |
272 | Continuous unidirectional fluid bias on reciprocating member |
273 | Radial cylinders |
274 | CONDITION RESPONSIVE VARIABLE VOLUMETRIC CAPACITY EXPANSIBLE CHAMBER PUMP (I.E., CLEARANCE CONTROL) |
278 | EXTERNAL CONDITION RESPONSIVE PUMPED FLUID CONTROL |
279 | WITH CONDITION RESPONSIVE PUMPED FLUID CONTROL |
280 | Responsive to pump created drive motor condition |
281 | Lubricant condition responsive |
282 | Plural separate sensing means for a single fluid controller |
283 | Bypass or relief valve controls venting by movable pump chamber part |
284 | Bypass or relief valve carried by movable pumping member |
285 | Valve passage directly connecting concurrently contracting and expanding nonrotary pump chambers |
286 | Plural pump units with individual or relative control |
289 | Variable cutoff or pumping member controlled port |
290 | Having timer or delay means for fluid controller |
291 | Reversibly driven pump having bypass active in either flow direction |
292 | Pumped fluid temperature responsive |
293 | Driven pump part speed responsive |
295 | Inlet throttle or stop valve |
296 | Bypass or relief valve part carried by or carries distributor part |
297 | Expansible chamber pump distributor operation modified |
299 | Normally open bypass or relief passage closed by increased pressure or flow |
300 | Fluid flow rate responsive |
301 | Inlet pressure increase opens bypass from pump inlet to discharge |
302 | Plural paths having individual condition responsive control means |
305 | Manual actuation of condition responsive valve |
306 | Pump inlet or pump chamber vented to ambient (e.g., vacuum breaker) |
307 | Pressure responsive relief or bypass valve |
312 | WITH MUFFLER ACTING ON PUMP FLUID |
313 | COMBINED |
314 | SINGLE ACTING CHANGEABLE TO OR FROM DOUBLE ACTING |
315 | REVERSE FLOW WITH UNIDIRECTIONAL DRIVE OR UNIDIRECTIONAL FLOW WITH REVERSE DRIVE |
316 | CORRELATED PUMP AND MOTOR OR CLUTCH CONTROL |
319 | INCLUDING DISENGAGEABLE ROTARY OR FRANGIBLE DRIVE CONNECTION |
320 | SERIALLY FORMED PUMPING CHAMBERS (E.G., ENDLESS) |
321 | MOTOR DRIVEN |
322 | Magnetostrictive chamber |
323 | Pump motor or starter driven by pump fluid |
324 | Pump operated as motor to start prime mover drive |
325 | Reversely rotated for starting |
326 | Including means for selectively varying motor speed or rotary motor direction |
327 | Reaction motor |
328 | Spring or weight motor |
330 | Tide or wave motor |
334 | Fluid current motor |
337 | Buoyant motor |
338 | Relatively movable pumping members driven by relatively movable working members |
339 | Nonrotary pumping and fluid motor working members |
340 | Common expansible chamber for oppositely movable working members |
342 | Including closed fluid interconnection between working members |
343 | Including mechanical interconnection to cause relative motion |
344 | Position of one working member controls motive fluid valve for another |
345 | Control by single member responsive to position of each of plural working members |
346 | Independently operated valve for each working member |
347 | Single member controls motive fluid for each working member |
348 | Common rotary pumping and fluid motor working member |
349 | Common pump and motor chamber |
350 | Motor rotor intermediate coaxial pump rotors |
351 | Pump rotor intermediate coaxial motor rotors |
352 | Motor within rotary pumping member |
355 | Pump within rotary working member |
357 | Pump fluid communicates with sealed chamber containing armature |
358 | Pump - motor unit raised in vertical conduit by pressure fluid applied below unit |
359 | Adjustable motor and pump rotor unit or relatively adjustable aligned pump and motor rotary shafts |
360 | Including means for facilitating assembly or disassembly of pump to or from motor or fixed support |
361 | Pump and motor unitarily adjustable relative to fixed support |
362 | Pump and motor interconnected by endless flexible transmission element |
363 | Resiliently mounted pump or motor |
364 | Internal-combustion engine |
365 | Axial thrust balancing means for rotary pump and motor |
366 | Including means utilizing pump fluid for augmenting cooling, lubricating, sealing, or cleaning of motor |
367 | Heat exchange means between pump fluid and secondary motor contacting fluid |
368 | Including additional means for motivating fluid flow to or from motor (e.g., auxiliary pump, pump fluid induced flow path, etc.) |
369 | Pump fluid directed to motor via downstream branched flow path |
371 | Pump fluid flows serially from motor through pump |
372 | Interrelated or common lubricating or cooling means for pump and motor |
373 | With means to prevent heat transfer between pump and motor |
374 | Including manual, mechanical, or diverse drive |
375 | Fluid motor |
376 | Steam motor discharge into pump fluid |
377 | Serial flow fluid from pumping chamber through motor working chamber |
379 | With motive fluid generator |
380 | Internal-combustion engine |
381 | Combustion products generator for motor |
382 | Plural pumping members; one additionally supplying motive fluid for second |
383 | Pulsator or fluid link |
390 | Fluid pump |
391 | Motor discharge into or upstream of pumping chamber |
392 | Common pumping and motor working member |
396 | Rectilinearly reciprocating motor working members coaxial with intermediate unitary pumping member |
397 | Rectilinearly reciprocating pumping members coaxial with intermediate unitary motor working member |
398 | Rectilinearly reciprocating cylinder and piston-type motor |
405 | Rotary motor |
410.1 | Electric or magnetic motor |
411 | Including electric power generating or storage means |
412 | Collapsible wall pump |
414 | Internal - external pressure balancer |
415 | Reciprocating rigid pumping member |
420 | Pump magnetically coupled to rotary drive |
421 | Trapped air motor seal (i.e., diving bell type) |
422 | Sealed service conduit |
423.1 | Rotary motor and rotary nonexpansible chamber pump |
423.2 | Vacuum cleaner |
423.3 | Submersible type |
423.4 | Turbomolecular pump |
423.5 | Plural units |
423.6 | Having nonflexible means to transmit power between motor shaft and pump shaft |
423.7 | With specific motor details |
423.8 | Having additional means to remove heat from pump or motor |
423.9 | Having means to prevent debris from entering pump |
423.15 | Having means to mount pump and motor in working position |
423.11 | Having means to prevent fluid leaking between pump and motor |
423.12 | Having bearing |
423.14 | With specific housing details |
424.1 | Supported for rotation on vertical axis |
410.2 | Having piezoelectric driven blade |
410.3 | Rotary expansible chamber pump |
425 | SEPARATE MANUAL AND POWER DRIVEN PUMPING MEMBERS |
426 | PLURAL PUMPS WITH INDIVIDUAL OR RELATIVE CONTROL |
430 | INCLUDING MEANS TO (1) AGITATE PUMP FLUID, OR (2) PREVENT FOREIGN MATERIAL SETTLING FROM PUMP FLUID |
432 | INCLUDING APPLICATION OF SEPARATE FLUID TO PUMP VALVE |
434 | INCLUDING SEPARATE PORT ON NONCYCLIC VALVE FOR DRAINING PUMP PORTION |
435 | INCLUDING SEPARATE PORT ON NONCYCLIC VALVE FOR VENTING OR FILLING PUMP PORTION |
436 | TRANSVERSELY MOVABLE IMPELLING MEMBER (E.G., PADDLE) |
437 | EXPANSIBLE CHAMBER TYPE |
438 | Liquid coolant introduced into gas pump chamber or inlet |
439 | Having additional chamber intake connection from nonpumping space |
440 | Having separate noncyclic valve (e.g., bypass, etc.) |
442 | Selectively usable plural inlet or outlet distributors for single chamber |
443 | Pressure responsive distributor opened responsive to pumping member position |
446 | Having means for holding pressure responsive distributor open |
447 | Pressure responsive distributor continuously biased open |
448 | Pump mounted in vertical tubular flow conduit removable as unit by driving rod manipulation |
449 | Removable unit having piston normally fixed in conduit |
450 | With latching or anchoring means released by rod movement |
451 | Valve element mounted in fixed chamber wall removable with pumping member |
454 | Including valve assembly, disassembly, or inspection facilitating means |
455 | Having valve parts relatively moved for nonvalving function |
456 | Relatively movable serial distributors |
457 | Including distributor formed by moving cylinder or liner |
458 | Plural pressure responsive distributors |
460 | Moving cylinder |
461 | Cylinder rotates or oscillates about longitudinal axis |
462 | Unidirectionally rotating cylinder |
464 | Cylinder oscillates about axis transverse to longitudinal axis |
466 | Inlet or discharge controlled by cooperating port in reciprocating cylinder and fixed member |
467 | Relatively movable cylinders |
468 | Having integral pump piston or external pumping face |
469 | Cylinder and piston reciprocate on common axis |
470 | Biasing means effects induction stroke of abutment driven, vacuum producing pumping member |
471 | Biasing means effects eduction stroke of abutment driven, pressure producing pumping member |
472 | Bellows-type chamber |
474 | Elongated flexible chamber wall progressively deformed |
475 | Plural chambers |
476 | Deformation by rolling or sliding engagement member |
477.1 | Plural spaced engagement members or member portions |
477.2 | Cassette |
477.3 | Specific rollers or slides structure |
477.4 | Helical slide |
477.5 | Roller axes or slide contact surfaces at significant angle with drive axis |
477.7 | Biased rollers or slides |
477.8 | Adjustable rollers or slides |
477.6 | Positively driven rollers |
477.9 | Specific backing member for flexible wall |
477.12 | Specific flexible wall or interposed flexible member |
477.13 | Flexible tube without backing member |
477.14 | Endless chain or belt |
478 | Inlet and discharge distributors at opposite ends of tubular flexible wall pumping chamber |
479 | Distributor formed from integral portion of flexible wall pumping member |
480 | Valve in collapsible wall pumping member |
481 | Oscillating pumping member |
485 | Delivery to different ports on successive strokes |
486 | Plural pumping members in single pump chamber |
489 | Control by withdrawal or tilting of pump piston relative to cylinder |
490 | Pumping member position controlled port |
491 | Common pumping member controls inlet or discharge for plural chambers |
493 | Including plural controlled inlet or outlet flow paths |
494 | Having means to selectively effect control at different positions of pumping member stroke |
495 | Pumping member comprises valved piston |
496 | Having serial control of inlet or discharge flow path |
497 | Pumping member controlled end wall port |
498 | Longitudinally spaced inlet and discharge sidewall ports |
499 | Having means to effect control at different positions of pumping member stroke |
500 | Control by movement of pumping member about axis |
501 | Having coextensive distributor opposite pumping member end face |
502 | Multiple cyclic outlet paths |
503 | Multiple cyclic inlet paths |
504 | Plural outlet paths to single discharge line acting under different conditions |
505 | Electrically or magnetically actuated distributor |
506 | Distributor movement adjustable |
507 | Distributor moved by separate fluid responsive surface |
509 | Distributor part forms traversed movable pump chamber wall portion |
510 | Mechanically actuated distributor |
511 | Piston carried distributor, one frictionally engages chamber wall, drive rod integral with other (e.g., piston driven by valve element through lost motion connection, etc.) |
512 | Unitary distributor element controls inlet or discharge for plural chambers |
513 | Conical engagement |
514 | Distributor in piston |
515 | Plural pumping chambers |
518 | Common element forms inlet and discharge distributor |
520 | Distributor abutted by or frictionally engaged with pumping member |
521 | Plural pumping chambers |
522 | Discharge conduit for first chamber communicates with nonpumping portion or second pumping member |
523 | Including valved piston |
524 | Unitary or interconnected elements form inlet or discharge distributors for plural chambers |
525 | Common piston includes valves for plural axially aligned chambers |
526 | Common inlet or discharge conduit mounted on piston |
527 | Fluid conduit for one chamber extends through portion of another |
528 | Fluid conduit for one chamber extends through portion of another |
529 | Parallel laterally spaced relatively movable pistons |
530 | Including nonvalved piston |
531 | Unitary or interconnected elements form inlet or discharge distributors for plural chambers |
533 | Common discharge conduit interposed between spaced parallel chambers |
534 | Chambers formed at opposite ends of rectilinearly moving pumping member |
538 | Inlet and discharge distributors at adjacent end of aligned chambers |
539 | Parallel laterally spaced relatively movable pumping members |
540 | Having pulsation dampening fluid receiving space |
541 | Space formed on pumping member |
542 | Inlet and discharge spaces |
543 | Direct contact with confined compressible fluid |
545 | Valved piston |
546 | Piston contains inlet and outlet valves |
547 | Fluid conduit fixed to piston |
548 | Having rigidly attached imperforate wall member |
549 | Having separate means biasing valve closed |
550 | Flexible |
551 | Hinged |
552 | Reciprocating |
555.1 | Fluid serially moved to opposite side of pumping member |
557 | Pump chamber in constant communication with inlet or discharge conduit |
558 | First distributor includes passage controlled by second distributor (i.e., inlet and outlet) |
559 | Having pumping chamber pressure responsive distributor |
560 | Single unitary element forms inlet and discharge distributor |
561 | Pumping member position responsive stop for distributor |
562 | Having means on pumping member for accommodating distributor portion |
563 | Similar inlet and discharge distributors of different size or material |
565 | Hinged inlet and discharge distributors in aligned conduits |
566 | Nonmetallic inlet or discharge distributor |
567 | Inlet and discharge distributors in coaxial ports |
569 | Distributor positioned opposite pumping member end face |
572 | MISCELLANEOUS |
CROSS-REFERENCE ART COLLECTIONS | ||
900 | SLURRY PUMPS (E.G., CONCRETE) |
901 | CRYOGENIC PUMPS |
902 | HERMETICALLY SEALED MOTOR PUMP UNIT |
903 | TREADLE OPERATED |
904 | WELL PUMP DRIVEN BY FLUID MOTOR MOUNTED ABOVE GROUND |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
DIGESTS | ||
DIG1 | MATERIALS DIGEST |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|