|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 415 | ROTARY KINETIC FLUID MOTORS OR PUMPS |
Click here for a printable version of this file |
1 | METHOD OF OPERATION |
2.1 | WITH MEANS FOR CONTROLLING CASING OR FLOW GUIDING MEANS IN RESPONSE TO NATURAL FLUID CURRENT FORCE OR DIRECTION |
3.1 | Having specific features for water current |
4.1 | Natural fluid current force responsive |
4.4 | Vertical runner axis |
4.5 | Axial flow runner |
5 | ENDLESS FLEXIBLE RUNNER (E.G., CHAIN, ETC.) |
6 | CYCLICALLY DIPPING, LIQUID RETAINING, ELEVATING AND DISCHARGING RECEPTACLE OR CONDUIT |
7 | FLOAT SUPPORTED OR BUOYANT RUNNER |
8 | DRIVEN, FLUID IMMERSED RUNNER WITH VANE IN UNCONFINED FLUID STREAM (E.G., TROLLING PLATE, ETC.) |
9 | INCLUDING DESTRUCTIBLE, FUSIBLE, OR DEFORMABLE NON-REUSABLE PART |
10 | WITH CONTROL MEANS RESPONSIVE TO MOTION DEVELOPED FLUID EDDY, ELECTRICAL, OR MAGNETIC EFFECT |
11 | WITH PUMP RECIRCULATION PASSAGE CONTROL RESPONSIVE TO WORKING FLUID CONDITION OR CHARACTERISTIC |
12 | WITH BIMETALLIC BLADE, VANE, OR ADJUSTMENT MEANS THEREFOR |
13 | WITH CONTROL MEANS RESPONSIVE TO NON-CYCLIC CONDITION SENSING, CENTRIFUGAL ACTUATION OR TORQUE |
14 | Casing, runner, or shaft position or extent of motion responsive |
15 | With input signal of independent condition |
16 | With testing means for speed control |
17 | Plural diverse condition responsive (e.g., temperature and pressure, speed and level, etc.) |
18 | Control of clutch or brake surface |
19 | Including control of starting motor or runner blade starting position |
20 | Control of working fluid and diverse apparatus part |
23 | Responsive to working fluid discharge angle from blade or vane |
24 | Responsive to liquid level or weight |
25 | Centrifugally initiated valve controlling fluid flow in shaft or runner |
26 | Responsive to moving member developed fluid force, current or pressure |
27 | Of relief valve in branched pump discharge line |
28 | Of valve bypassing runner stage |
29 | Motor and upstream working fluid flow control |
30 | By shaft speed or torque responsive means |
31 | Helix or screw runner |
32 | Including reset or manual adjustment |
33 | Of adjustable runner, blade, shaft or bearing |
35 | Of movable deflector intermediate jet discharge and runner |
36 | Of working fluid valve or vane |
47 | Temperature or fluid force responsive member |
51 | WITH INDEPENDENTLY OPERATED TIMER OR PROGRAMMER ACTUATOR FOR WORKING FLUID CONTROL |
52.1 | WITH MEANS FOR RE-ENTRY OF WORKING FLUID TO BLADE SET (E.G., RE-ENTRY TYPE DEVICE, PASSAGE, ETC.) |
53.1 | Cross flow runner |
53.2 | Having vane or deflector within runner blade set |
53.3 | Having selectively adjustable vane or working fluid control means |
54.1 | To opposite face of blade |
55.1 | Turbine regenerative pump |
55.2 | Having specific means to deflect working fluid in regenerative passage |
55.5 | Having plural, rigidly related blade sets |
56.1 | Pump priming means |
56.2 | Vertical runner shaft |
56.3 | Having plural and arcuately arranged vanes around runner |
56.4 | Re-entry through working fluid discharge passage for runner |
56.5 | Re-entry working fluid joins inlet working fluid upstream of runner |
56.6 | Walled pumping chamber positioned within liquid separation chamber |
57.1 | Plural, independent, serially acting re-entry means |
57.2 | Having additional blade set in re-entry path |
57.3 | Re-entry from opposite sides of blade face |
57.4 | Re-entry into blade in radial plane of blade |
58.1 | Having additional blade set in re-entry path |
58.2 | Radial flow runner portion guides re-entry working fluid (e.g., hub, back plate, etc.) |
58.4 | Re-entry working fluid joins inlet working fluid upstream of runner |
58.6 | Open recirculation from and to blade set |
58.7 | Axial flow runner |
59.1 | Plural blade sets |
60 | PLURAL RUNNERS SUPPORTED FOR RELATIVE MOTION OR ON SEPARATE SHAFTS |
61 | With means for selective runner operation or drive shaft connection |
62 | Diverse type runners, blade systems or working fluid paths in runners |
64 | Radial flow through concentric radially spaced blade rows |
65 | Interdigitated, oppositely extending, coaxial, axially spaced blade rows |
66 | Serially spaced in working fluid flow path |
70 | RUNNER HAS PLANETARY MOTION OR ROTATES AROUND OBLIQUE OR CONSTANTLY MOVING AXIS |
71 | RUNNER HAS SPIRALLY ARRANGED BLADE OR FLUID PASSAGE |
76 | FLUID FLOW BETWEEN PLURAL SINUOUS RUNNER SURFACES |
77 | AXIAL FLOW RUNNER WITH BLADES EXTENDING RADIALLY INWARD AND OUTWARD FROM COMMON ANNULUS |
78 | With means selecting only one blade row for working fluid flow |
79 | Serial flow through inward and outward extending blade rows |
80 | MOTOR RUNNER MOTIVATED BY REACTION TYPE JET DISCHARGE NOZZLE FROM INTERNAL WORKING FLUID CONDUIT |
83 | RUNNER WITH ANNULAR BLADE ROWS OR FLUID CHANNELS SPACED ON COMMON RADIAL PLANE |
84 | Including peripheral blade row |
85 | With means for reversing runner rotation |
86 | Blades projecting axially from plural transverse runner faces |
88 | PUMP HAVING ROTATING INLET END OR SCOOP IMMERSED IN LIQUID |
89 | CENTRIFUGAL BOWL PUMP |
90 | SMOOTH RUNNER SURFACE FOR WORKING FLUID FRICTIONAL CONTACT (E.G., UNBLADED RUNNER, ETC.) |
91 | ANNULAR RUNNER WITH INWARDLY PROJECTING BLADE |
92 | MOTOR RUNNER HAVING WORKING FLUID TRAPPING POCKET |
93 | AXIALLY OPPOSED WORKING FLUID PATHS TO OR FROM RUNNER (E.G., END BALANCE, ETC.) |
94 | With working fluid regulation or control means |
96 | With additional shaft connected end balancing fluid force reactor surface |
97 | Pump impeller means |
98 | Impeller blades extending from opposite sides of common central support |
99 | Plural axially spaced impellers |
101 | Plural, separate, parallel, simultaneous flow paths |
104 | WITH SHAFT CONNECTED FLUID FORCE SUBJECTED THRUST BALANCING SURFACE |
105 | In separate chamber having non-system fluid inlet |
106 | Fluid force on opposite face of blade or blade support member |
107 | Motor shaft |
108 | CASING AND SPACED HOUSING WITH SPACE VENTED TO WORKING FLUID |
109 | WITH SHAFT CONNECTED FLUID ABUTMENT MEMBER IN SEALING FLUID FILLED CHAMBER |
110 | WITH LUBRICATING, SEALING, PACKING OR BEARING MEANS HAVING INTERNAL WORKING FLUID CONNECTION (E.G., FLUID OR FLUID BIASED SEAL, ETC.) |
114 | WITH CHANGING STATE CONFINED HEAT EXCHANGE MASS |
115 | WITH PASSAGE IN BLADE, VANE, SHAFT OR ROTARY DISTRIBUTOR COMMUNICATING WITH WORKING FLUID |
116 | WITH DIVERSELY ORIENTED INLET OR ADDITIONAL INLET FOR DIVERSE FLUID (E.G., HEATING, COOLING OR MIXED WORKING FLUID, ETC.) |
118 | WITH INSPECTION, SIGNALING, INDICATING OR MEASURING MEANS |
119 | WITH SOUND OR VIBRATORY WAVE ABSORBING OR PREVENTING MEANS OR ARRANGEMENT |
120 | CENTRIPETAL PUMP |
121.1 | WITH CUTTER OR COMMINUTOR FOR DEBRIS IN WORKING FLUID |
121.2 | WITH SEPARATING MEANS OR GUARD FOR SOLID MATTER IN WORKING FLUID (E.G., DEBRIS, ETC.) |
121.3 | COMBINED |
122.1 | INCLUDING SHAFT TRANSMISSION TRAIN, BRAKE, CLUTCH, OR ATTENDANT ACTUATED DRIVE MEANS |
123 | Brake or clutch |
124 | Hand or foot operated crank, pedal or traction wheel |
124.1 | Runner supported portion engages shaft transmission train (e.g., peripheral gear drive, etc.) |
124.2 | Shaft transmission train having flexible means or coupling |
125 | INCLUDING MEANS TO CAUSE CYCLICAL MOVEMENT OF A PART (E.G., BLADE, VALVE, ETC.) |
126 | INCLUDING CASING PART SELECTIVELY MOVABLE RELATIVE TO FIXED SUPPORT |
129 | RUNNER OR BLADE SELECTIVELY ADJUSTABLE RELATIVE TO CASING |
130 | Relatively angularly adjustable plural blades or runners |
131 | Axially adjusted |
133 | Radially adjusted or centered shaft |
134 | INCLUDING THERMAL EXPANSION JOINT |
140 | RESILIENT OR MOVABLY MOUNTED BLADE PORTION OR AXIALLY MOVABLE RUNNER OR SHAFT |
142 | SHAFT BEARING COMBINED WITH OR RETAINED BY ARM OR VANE IN SURROUNDING WORKING FLUID SPACE |
143 | PLURAL RUNNERS HAVING DIFFERENT TYPE FLOW PATHS |
144 | WORKING FLUID BYPASS |
146 | INCLUDING WORKING FLUID FORCE RESPONSIVE VANE OR FLOW CONTROL |
148 | SELECTIVELY ADJUSTABLE VANE OR WORKING FLUID CONTROL MEANS |
149.1 | Separate means upstream and downstream of blade set |
150 | Runner, shaft, or separate motor operated |
151 | Upstream of runner |
152.1 | Motor runner with selective inlet paths for reversible rotation |
152.2 | Runner includes radial flow blade set |
153.1 | Separate runner blade set acted upon for reverse rotation |
154.1 | Plural inlets simultaneously discharging working fluid onto single blade set |
154.3 | Including axial flow blade set |
155 | Plural, independently adjustable |
156 | Deformable, resilient or resiliently biased |
157 | Single, axially movable cylinder or plate |
159 | Plural and arcuately or circularly arranged around runner axis |
160 | Individually pivoted vanes |
165 | On same radial plane with blade |
167 | Movable pipe or nozzle |
167.1 | Convertible series-parallel pump |
168.1 | INCLUDING MEANS FOR HANDLING WORKING FLUID LEAKAGE |
169.1 | INCLUDING MEANS FOR HANDLING PORTION SEPARATED FROM WORKING FLUID |
170.1 | BEARING, SEAL, OR LINER BETWEEN RUNNER PORTION AND STATIC PART |
171.1 | Dynamically created seal |
172.1 | Means to seal radial flow pump runner inlet from outlet |
173.1 | Between blade edge and static part |
173.2 | Selectively adjustable |
173.3 | Resilient, flexible, or resiliently biased |
173.4 | Erodable or permanently deformable |
173.5 | Labyrinth seal |
173.6 | Between blade supported radial tip ring and static part |
173.7 | Between axial flow runner and vane or vane diaphragm structure |
174.1 | Selectively adjustable |
174.2 | Resilient, flexible, or resiliently biased |
174.4 | Erodable or permanently deformable |
174.5 | Labyrinth seal |
175 | INCLUDING ADDITIONAL MEANS CAUSING OR CONTROLLING FLUID FLOW FOR HEAT EXCHANGING, LUBRICATING OR SEALING |
177 | INCLUDING HEAT INSULATION OR EXCHANGE MEANS (E.G., FINS, LAGGING, ETC.) |
178 | Working fluid on at least one side of heat exchange wall |
180 | Cooling fluid contacts shaft, seal or bearing |
181 | MEANS, DISPOSITION OR ARRANGEMENT FOR CAUSING SUPERSONIC WORKING FLUID VELOCITY |
182.1 | WORKING FLUID PASSAGE OR DISTRIBUTING MEANS ASSOCIATED WITH RUNNER (E.G., CASING, ETC.) |
183 | Plural distributing means immediately upstream of runner |
184 | Inlet scrolls, or distributors within inlet scroll |
185 | Arcuately or circularly arranged around runner axis |
196 | Passage or casing attached removable liner or wear member |
198.1 | Plural rigidly related blade sets |
199.1 | Including serial radial flow blade sets and intermediate stationary flow diverter(s) |
199.4 | Including an axial-flow blade set |
200 | Specific casing or vane material |
201 | Access opening through portion of casing or cover |
202 | Nozzle discharging onto motor runner |
203 | Casing having tangential inlet or outlet (i.e., centrifugal type) |
207 | Pump outlet or casing portion expands in downstream direction |
208.1 | Vane or deflector |
208.2 | Plural and arcuately or circularly arranged in radial plane around runner axis |
208.3 | Plane intersects with runner blade |
209.1 | Plural, axially spaced vane sets acting successively or having specific spacing means |
209.2 | Having means for mounting diaphragm or plural vane holder to casing |
209.3 | Having specific vane mounting means |
210.1 | Fixed between radially separate surfaces |
211.1 | In radial plane with runner blade |
211.2 | Downstream of runner |
212.1 | Scroll or helical type casing with specific exit nozzle |
213.1 | Casing with mounting means |
214.1 | Casing having multiple parts releasably clamped (e.g., casing seal, etc.) |
215.1 | Casing having multiple parts welded, cemented, or fused |
216.1 | With runner shaft of specific shape or material |
217.1 | With runner having corrosion resistant or nonmetallic portion |
218.1 | With runner having conical hub including small diameter facing upstream |
219.1 | Casing with axial, conical flow runner |
220 | Casing with axial flow runner |
221 | Having specific features for liquid flow |
222 | Pump with casing narrowing to runner |
223 | Having runner in orifice of radially extending partition or casing element |
224 | Casing with nonradial flow runner (e.g., circumferential flow, etc.) |
224.5 | Radial flow casing having vaneless annulus diffuser |
225 | Exit chamber in radial plane axially offset from runner (e.g., sludge pump, etc.) |
226 | Annular exit chamber outward of runner |
227 | Runner having flow confining continuous passage |
228 | Runner having full circular shroud for blades |
229 | BEARING, SEAL, OR LINER BETWEEN SHAFT OR SHAFT SLEEVE AND STATIC PART |
232 | MISCELLANEOUS |
CROSS-REFERENCE ART COLLECTIONS | ||
900 | ROTARY BLOOD PUMP |
901 | DRILLED WELL-TYPE PUMP |
902 | ROTARY PUMP TURBINE PUBLICATIONS |
903 | WELL BIT DRIVE TURBINE |
904 | TOOL DRIVE TURBINE (E.G., DENTAL DRILL, ETC.) |
905 | NATURAL FLUID CURRENT MOTOR |
909 | AIR STACK OR SHAFT HAVING NATURAL FLUID CURRENT MOTOR |
910 | REVERSIBLE BETWEEN PUMP AND MOTOR USE |
911 | PUMP HAVING REVERSIBLE RUNNER ROTATION AND SEPARATE OUTLETS FOR OPPOSING DIRECTIONS OF ROTATION |
912 | INTERCHANGEABLE PARTS TO VARY PUMPING CAPACITY OR SIZE OF PUMP |
913 | INLET AND OUTLET WITH CONCENTRIC PORTIONS |
914 | DEVICE TO CONTROL BOUNDARY LAYER |
915 | PUMP OR PORTION THEREOF BY CASTING OR MOLDING |
916 | PERPETUAL MOTION DEVICES |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|