|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 410 | FREIGHT ACCOMMODATION ON FREIGHT CARRIER |
Click here for a printable version of this file |
1 | INCLUDING TURNTABLE FOR LOAD, E.G., FOR SEMITRAILER |
2 | PARTICULAR ARTICLE ACCOMMODATION |
3 | Wheeled vehicle |
4 | Four-wheeled vehicle accommodation |
5 | Overturned or on-edge vehicle arrangement |
7 | Vehicle retainer* |
8 | Multipositionable; i.e., along array strip or track |
13 | In arrangement in which the vehicle end, at least, is raised to hood section height |
14 | Elevatable deck suspended from hoist line |
16 | Including wheel-straddling member which is a retainer* or retainer* adjunct |
17 | Including suspended retainer* member or prop |
18 | Retainer* arm or prop extending from freight carrier wall |
19 | For wheel, hub, or axle shaft |
23 | Tiedown* |
24 | Raised vehicle arrangement |
24.1 | Including above-cab stowage |
25 | Interrupted or recessed wheel support |
26 | Multilevel deck; i.e., four-wheel support |
30 | Wheel cradle, chock, or well |
31 | Grouped |
32 | Group of articles which are, predominantly, regularly contoured; i.e., are rodlike, panel shaped, blocks, or analogous forms |
33 | Articles with protuberance or flange |
34 | Grouped by load binder or press means |
35 | Grouped together with on-and-off base |
36 | Cylindrical article group |
38 | Press |
41 | Including angle overlay, e.g., corner guard |
42 | Cylindrical article group |
43 | Vehicle body part group |
44 | Accommodation of article which is massive relative to freight carrier |
46 | On supporting on-and-off base |
47 | Cylindrical article accommodation |
51 | DRAFT (INCLUDING PUSHED) FREIGHT CARRIER, E.G., WAGON, HAND TRUCK |
52 | LOAD BEARER ACCOMMODATION |
53 | Stowed as bridge between trucks |
54 | Diverse load accommodation, e.g., convertible between semitrailer and container accommodation |
56 | Semitrailer accommodation |
57 | Fore-and-aft accommodation |
58 | Collapsible and erectable stand |
59 | Tractor operated |
61 | Jack screw erected |
62 | (Fore-and-aft direction slide cushioning means)* |
63 | Cushioned cylinder strut |
64 | King pin latch |
65 | Accommodation means conforms to wheel sidewall during guidance or rest condition, e.g., rub rail or wheel well |
66 | Wheeled load bearer accommodation |
68 | Accommodation of rigid wall container for bulk material |
69 | Load bearer tripped retainer* |
71 | Corner pedestal |
72 | Vertically displaceable, e.g., on horizontal axis |
76 | Including male-female retainer* |
77 | Retainer |
78 | Multiunit retainer |
80 | Load bearer understructure retention, e.g., leg engaging |
82 | Twist lock |
84 | Load bearer mounts active retainer received by static freight carrier keeper |
85 | Load bearer (load lashing retainer)* |
86 | Including load bearer cushioning means |
87 | Cushioned accommodation |
89 | Wall-to-wall socket-entering load bearer |
90 | Load bearer accommodation by underside socketing |
92 | Rollerway |
93 | Drop side car, side converts to ramp |
94 | Load bearer abutment |
96 | LOAD LASHING RETAINER OR LOAD LASHING ADJUNCT |
97 | Wraparound |
98 | Method |
99 | Including angular surface guard, e.g., edge-around |
100 | Including tightener or tensioner |
101 | Anchor |
102 | Multipurpose, e.g., combined, convertible |
103 | Including winch or tensioner |
104 | Track-guided anchor |
106 | Mounted on exposed and bordering structural member |
111 | Project-retract (tie piece)* |
112 | Recessed in car facing |
115 | Array strip or formation |
116 | Including mounting means for facile assembly or removal of (tie piece)* |
117 | YIELDABLE BRACE |
120 | RIGID MEMBERS RETAINER, E.G., WRAPAROUND TYPE |
121 | LOAD BRACING MEANS |
122 | Bifacial brace |
127 | Brace panel with wall-to-lading adjustment means |
129 | Panel or frame, wall-to-wall |
130 | Track mounted |
131 | Wall-to-wall pair, oppositely swinging |
132 | Including pin-in-aperture latch |
140 | Deployed structure or comprising individually installed parts |
142 | Having aperture-entering latch pin |
143 | Brace bar, wall-to-wall |
144 | Aperture-entering wall-to-wall connection at the end |
150 | Track mounted, for slidable adjustment along the car wall |
151 | Wall-to-wall force fit; or having wall piercing end |
152 | Brace bar receiver |
153 | Brace post |
154 | Honeycomb |
155 | Edge-around dunnage brace |
156 | MISCELLANEOUS |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|