|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 405 | HYDRAULIC AND EARTH ENGINEERING |
Click here for a printable version of this file |
1 | MARINE VESSEL PORTAGE, LAUNCHING, OR REMOVING |
8 | PRESSURIZED CAISSON |
11 | MEANS TO EXPOSE A NORMALLY WETTED SURFACE,E.G., COFFERDAM, ETC. |
12 | Contoured to wetted surface, e.g., side hung ship caisson |
13 | Having transport, placement, or dislodgement means |
14 | Connectable sections |
15 | BANK, SHORE, OR BED PROTECTION |
16 | Revetment |
21 | Wave or flow dissipation |
36 | DRAINAGE OR IRRIGATION |
37 | Control means responsive to sensed condition |
38 | Including subsurface moisture barrier |
39 | Having regulation of flow through channel |
42 | End cap |
43 | Porous or apertured pipe, flume, or tileway |
44 | Uniform discharge |
45 | Porous |
46 | Earthen bottom |
47 | Flow through joint |
48 | Open seam or shielded outlet |
49 | Corrugated |
50 | Porous waterway, e.g., sand drain, etc. |
51 | Branched flow |
52 | FLUID CONTROL, TREATMENT, OR CONTAINMENT |
53 | Fluid storage in earthen cavity |
54 | With indicator or alarm means |
55 | Cavity construction |
59 | Supply or recovery of stored fluid by separate fluid |
60 | Floatable matter containment |
73 | Erosive scouring |
74 | Settling of suspended matter in a specific location (e.g., at a scoured pier) |
75 | Extracting power from moving fluid |
79 | Wave generation or enhancement |
80 | Flow control |
81 | Fishway |
84 | Navigable canal |
87 | Water gate or adjustable weir |
88 | Center flow |
89 | Uniform discharge |
90 | Removable |
92 | Condition responsive |
98 | Roller or flexible |
99 | Swinging |
103 | Sliding |
107 | Artificial water barrier (e.g., dam, levee, etc.) |
108 | Having spillway |
109 | Having impervious core |
110 | Hollow or buttressed |
113 | Tension stayed |
114 | Connectable sections |
115 | Flexible |
116 | In situ construction |
118 | Open channel |
124 | Culvert |
127 | Intake |
128.1 | SOIL REMEDIATION |
128.15 | In situ contaminant removal or stabilization |
128.7 | With treatment |
129.1 | SUBTERRANEAN WASTE DISPOSAL, CONTAINMENT, OR TREATMENT |
129.15 | Compacting |
129.2 | With treatment of waste |
129.35 | Earthen formation |
129.45 | Waste barrier, containment, or monitoring |
129.5 | Monitoring, detecting, or sensing |
129.55 | Complete containment structure |
129.6 | Floor, pit, or wall |
129.65 | With treatment |
129.7 | With drainage or collection |
129.75 | Flexible sheet or liner |
129.8 | Rigid sectional members |
129.85 | Drainage or collection |
129.9 | Daily cover |
129.95 | Landfill |
130 | TEMPERATURE MODIFICATION OR CONTROL OF EARTHEN FORMATION |
132 | UNDERGROUND PASSAGEWAY, E.G., TUNNEL |
133 | Vertical |
134 | Sectional |
136 | Subaqueous |
138 | Boring |
139 | With auxiliary tunnel |
140 | By axially overlapped members |
141 | Shield |
142 | With transverse force application feature |
143 | Direction control |
144 | Door or bulkhead |
145 | Discrete independently advanceable earth supporting segments |
146 | Lining installation |
147 | Seal |
148 | Work platform |
149 | Cut and cover |
150.1 | Lining |
154.1 | SUBTERRANEAN OR SUBMARINE PIPE OR CABLE LAYING, RETRIEVING, MANIPULATING, OR TREATING |
155 | Cast in situ |
156 | With forming or cutting of pipe or cable |
157 | With protection or indication of pipe or trench |
158 | Submerging, raising, or manipulating line of pipe or cable in or from marine environment |
159 | Entrenched or buried |
160 | Condition responsive |
161 | Entrenching or burying apparatus guided by pre-positioned pipe or cable |
164 | By towing submerged sled with attached plow and pipe or cable guide |
166 | Facilitated by extension from line-laying vessel |
168.1 | With causing or controlling the deformation of a line |
169 | With assembling of line structure |
171 | By control of buoyancy |
172 | With anchoring of line |
173 | With raising of line from marine floor |
174 | By means advancing along terrain and guiding pipe or cable into subterranean position |
175 | Condition responsive |
176 | Tape or strip |
177 | With positive feed or means to vary tension in pipe or cable |
178 | Simultaneous laying of plural parallel pipes or cables |
179 | With backfill or bedding material conveying or dispensing means |
180 | Including trench forming plow with pipe or cable guide |
183.5 | Moving cable within pipe |
184 | Advancing subterranean length of pipe or cable |
184.1 | Repair, replacement, or improvement |
184.4 | Supporting, anchoring, or positioning of pipe or cable |
184.5 | Plural pipe sections |
185 | DIVING |
186 | Suit or accessory therefor |
188 | Underwater docking or mooring |
190 | Remote control |
192 | With air lock |
193 | With pressure equalization |
194 | With continuous surface access |
195.1 | MARINE STRUCTURE OR FABRICATION THEREOF |
196 | With work deck vertically adjustable relative to floor |
197 | Sectional leg |
198 | Longitudinally extending projections or recesses |
199 | Frictional gripper |
200 | By buoyancy control |
201 | With horizontally movable work deck |
202 | With pivotal connection between work deck and base |
203 | Floatable to site and supported by marine floor |
204 | With assembly of sectional supporting structure at site |
205 | With ballasting means to sink or position structure at site |
209 | Separable transport means |
210 | Storage container |
211 | Structure protection |
217 | In or on frozen media |
218 | Dock |
222 | Cast in situ |
223.1 | Tension leg platform |
224 | With anchoring of structure to marine floor |
229 | FOUNDATION |
230 | Underpinning |
231 | Columnar structure (e.g., pier, pile) |
232 | Process or apparatus for installing |
233 | Casting in situ hardenable fluent material |
234 | With heating, cooling, or explosion |
235 | With subsequent moving |
236 | Subsurface dispensing of material for flow toward surface |
237 | Forming subsurface enlargement |
239 | Providing embedded metallic reinforcement |
240 | Dispensing fluent material while withdrawing dispenser |
243 | Withdrawing form structure |
244 | With anchoring of structure |
245 | Driving removable wall supporting core |
248 | With subsurfacr fluid discharge |
249 | Caisson or hollow shaft |
250 | Comprising series of connected longitudinal sections having diverse compositions |
251 | With joint or connection between sections of similar material |
252.1 | Pile having screw threads |
253 | With driving or cutting tip |
255 | With end cap |
256 | Concrete |
258.1 | EARTH TREATMENT OR CONTROL |
259.1 | Rock or earth bolt or anchor |
259.2 | Frangible bolt |
259.3 | Expandable tube |
259.4 | Bolt having wedge expander |
259.5 | With settable material feature |
262 | With retaining wall |
263 | Chemical |
270 | Impermeabilization |
271 | Compaction |
272 | Shoring, bracing, or cave-in prevention |
273 | Cribbing |
274 | Sheet piles |
282 | Trench shoring |
284 | Retaining wall |
287.1 | Cast in situ |
288 | Roof support |
302.4 | Ground stabilization or reinforcement |
303 | MISCELLANEOUS |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|