This page requires javascipt to function properly
1 ROAD SYSTEM (E.G., ELEVATED, INTERCHANGE)
3 . (1 indent ) With conduit support means
4 . (1 indent ) Street or curb inlet for surface drainage
5 .. (2 indent ) Separately attached curb box
6 TRAFFIC STEERING DEVICE OR BARRIER
8 .. (2 indent ) With rim or edge protector
10 . (1 indent ) Yielding
11 .. (2 indent ) Distinct biasing means recessed in roadway
12 . (1 indent ) Attenuated lane marker type
13 .. (2 indent ) Discrete interfitted element
14 .. (2 indent ) Impregnated with reflective material
15 . (1 indent ) Vibration inducing member (e.g., road stud, speed bump)
16 .. (2 indent ) Including reflector
18 . (1 indent ) Combined sheet and preformed module
19 . (1 indent ) Anti-slip surface
20 .. (2 indent ) Abrasive impregnated
21 .. (2 indent ) Including metal
22 . (1 indent ) Including light admitting means
23 .. (2 indent ) With removable lens
24 .. (2 indent ) Concrete frame
25 . (1 indent ) Vault cover-closure
26 .. (2 indent ) Elevation or level adjustment
27 . (1 indent ) Including bed
28 .. (2 indent ) Having preformed element layer
29 ... (3 indent ) Blocks
30 ... (3 indent ) Having irregular aggregate module
31 .. (2 indent ) Plural layers
32 . (1 indent ) Rubber or rubber-like
33 .. (2 indent ) Integral key to base
34 . (1 indent ) Modules or blocks (preformed)
35 .. (2 indent ) Portable mat type
36 ... (3 indent ) Foraminous traffic surface
37 .. (2 indent ) Including spacer means
38 ... (3 indent ) Integral
39 .... (4 indent ) Bevel or incline edge
40 .. (2 indent ) With separate interlocking member
41 .. (2 indent ) Interfitting
42 .. (2 indent ) Patterned
43 .. (2 indent ) Supported by footing or beam
44 .. (2 indent ) Composite or compound
45 .. (2 indent ) Reinforced
47 . (1 indent ) Including joint means
48 .. (2 indent ) With transitory core, cap, screed, or installation means (e.g., forms)
49 .. (2 indent ) With internal cavity for deformable filler
50 .. (2 indent ) With offset or keyed slab ends
51 ... (3 indent ) Plus bridge or dowel means
52 .. (2 indent ) With articulated dowel means
53 .. (2 indent ) With underlying bridge for adjacent slab ends
54 ... (3 indent ) And overlying bridge means
55 ... (3 indent ) Janus-faced angle member
56 .. (2 indent ) With mid-slab bridge means
57 ... (3 indent ) Sliding plate pair
58 .... (4 indent ) Horizontal slide plane
59 ... (3 indent ) End cushioned or lubricated dowel
60 ... (3 indent ) Sleeved or telescoped at joint
61 ... (3 indent ) Cantilevered dowel or only filler support
62 ... (3 indent ) Supported dowel end
63 .... (4 indent ) And supported dowel end
64 .. (2 indent ) Preformed non-metallic only
65 ... (3 indent ) Externally profiled
66 ... (3 indent ) Encased, laminated or composite
67 .. (2 indent ) Compound or composite
68 .. (2 indent ) Strip or filler plus supporting bracket
69 .. (2 indent ) Sealing cap or filler support
70 . (1 indent ) Reinforced structure
71 MISCELLANEOUS ROAD STRUCTURE (E.G., HEATED PAVEMENT)
73 . (1 indent ) Handling or treating preformed modular unit
74 . (1 indent ) Providing expansion joint
75 . (1 indent ) In situ treatment of earth or roadway
76 .. (2 indent ) Dust fixation or soil stabilization
77 .. (2 indent ) Heating
78 .. (2 indent ) Raising sunken pavement
80 .. (2 indent ) Including separate handling of different sized aggregate
81 . (1 indent ) Separate handling of different sized aggregate
82 . (1 indent ) Sequential construction of diverse layers
84.05 . (1 indent ) Automatic control
84.1 .. (2 indent ) Of material leveling means
84.2 ... (3 indent ) Adjusted to a predetermined path
84.5 ... (3 indent ) Adjusted to an acoustical or optical signal
84.8 ... (3 indent ) Specific to a sloped or curved application
85 . (1 indent ) With means for alternative ground support by tool or transport means
86 .. (2 indent ) Tool attachment type
87 . (1 indent ) Means to install or form joint
88 .. (2 indent ) And means to hold or position dowel
89 .. (2 indent ) Means to form groove in plastic or uncured roadway
90 . (1 indent ) With in situ means for both comminuting and treating, e.g., grading, oiling, stabilizing
91 .. (2 indent ) Including removal and redepositing means
92 . (1 indent ) With means for in situ material preparation, e.g., mixing
93 . (1 indent ) With surface marking (or grooving)
94 .. (2 indent ) Applied to existing hard surface
95 . (1 indent ) With means for heating a road base, surface, or material
96 . (1 indent ) With means for profile shaping, e.g., crown
97 .. (2 indent ) Manually propelled
98 .. (2 indent ) Curb or gutter
99 . (1 indent ) Block laying
100 . (1 indent ) Reinforcement material placing, laying or positioning
101 . (1 indent ) Material distribution means
102 .. (2 indent ) Including dynamic means to densify material
103 ... (3 indent ) Leveling or smoothing roller
104 .. (2 indent ) Shoulder paving or surface widening
105 .. (2 indent ) With material supply to self-contained side forms, e.g., slip-forms
106 .. (2 indent ) With material supply to unit-supporting rail type side forms
107 .. (2 indent ) Joint or crack filling
108 .. (2 indent ) Including material supply
109 ... (3 indent ) Boom and bucket type
110 ... (3 indent ) Portable spreader box
111 ... (3 indent ) Liquid supply
112 . (1 indent ) Tool rotating in horizontal plane
113 . (1 indent ) Means to agitate material
114 .. (2 indent ) Mounted on screed
115 .. (2 indent ) Material immersed agitating means
116 ... (3 indent ) Individual element, vertically oriented
117 .. (2 indent ) Compacting roller with vibrating means
118 . (1 indent ) Screed or drag
119 .. (2 indent ) Supported on rail type side forms
120 .. (2 indent ) Reciprocating
121 . (1 indent ) Sheep foot roller
122 . (1 indent ) Rotating drum, roller or tire
123 .. (2 indent ) Three tandem rollers
124 .. (2 indent ) Roller periphery characteristics
125 .. (2 indent ) Plural roll axes angularly shiftable
126 .. (2 indent ) Plural roll axes relatively shiftable
127 .. (2 indent ) Specific to slope, trench or shoulder application
128 .. (2 indent ) Attachment or combined
129 .. (2 indent ) With means to lubricate, scrape or clean roller surface
130 .. (2 indent ) Shiftable or variable ballast
131 .. (2 indent ) Manually propelled, e.g., lawn roller
132 .. (2 indent ) Plural rolls with common axes
133.1 .. (2 indent ) Manually guided
133.2 .. (2 indent ) Attached to a disparate device
134 REINFORCEMENT STRUCTURE PER SE
135 . (1 indent ) With road chair
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .