|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 374 | THERMAL MEASURING AND TESTING |
Click here for a printable version of this file |
1 | THERMAL CALIBRATION SYSTEM |
2 | By thermal radiation emitting device (e.g., blackbody cavity) |
3 | By immersion in liquid having controlled temperature |
4 | LEAK OR FLAW DETECTION |
6 | DISTANCE OR ANGLE |
8 | FLAMMABILITY TESTING |
9 | EMISSIVITY DETERMINATION |
10 | DIFFERENTIAL THERMAL ANALYSIS |
14 | THERMAL GRAVIMETRIC ANALYSIS |
15 | BY APPLYING KNOWN THERMAL GRADIENT (E.G., INDICATION OF RESPONSE BY LOCATION) |
16 | TRANSFORMATION POINT DETERMINATION (E.G., DEW POINT, BOILING POINT) |
17 | By change in optical property (e.g., transmission) |
21 | By electrical condition of specimen |
22 | By change in motion of movable element |
24 | By change in pressure of flow rate |
25 | By thermal arrest (e.g., time-temperature curve) |
27 | Between gaseous and liquid states |
29 | HEAT FLUX MEASUREMENT |
31 | CALORIMETRY |
32 | Total radiant energy or power measurement |
33 | With control of heat added to or lost from a sample container (e.g., isothermal calorimetry) |
35 | Heat absorbing heigh temperature gas probe (e.g., enthalpy or fluid cooled probe) |
36 | Heat value of combustion (e.g., 'calorific value') |
39 | Gain or loss of heat by heat utilizing load in path of heat exchange fluid |
42 | Throttling calorimeter (e.g., steam quality) |
43 | DETERMINATION OF INHERENT THERMAL PROPERTY (E.G., HEAT FLOW COEFFICIENT) |
45 | THERMAL TESTING OF A NONTHERMAL QUANTITY |
46 | With loading of specimen (e.g., stress or strain) |
53 | Of cure or hardenability |
54 | Of fluid volume |
55 | Expansion or contraction characteristics (e.g., dilatometry) |
57 | Of susceptibility to thermally induced deteriouration, flaw, or failure |
100 | TEMPERATURE MEASUREMENT (E.G., THERMOMETER) |
101 | Composite temperature-related paramenter |
102 | Time-temperature relationship (e.g., integral, deterioration, change) |
103 | Time-temperature integration performed by particular circuit arrangement |
104 | Peak (maximum or minimum) with respect to time |
105 | Indicating tube with sensing material return prevention |
106 | Permanent visual indication (i.e., irreversible) |
107 | Rate of change |
108 | Degree-days |
109 | Climate related (e.g., wind-chill factor, discomfort index) |
110 | Plural spaced temperature function |
117 | By a vibratory effect (e.g., resonant frequency, acoustical) |
120 | In spaced noncontact relationship to specimen |
121 | By thermally emitted radiation |
122 | By microwave arrangement |
123 | Transparent material measurement or compensation (e.g., spectral line, gas, particulate suspension |
124 | With scanning or temperature distribution display |
125 | With fluid flow purging device |
126 | Having emissivity compensating or specified radiating surface |
127 | Having significant frequency limitation or relationship (e.g., peak, ratio) |
128 | Having significant signal handling circuitry (e.g., linearizing, emissivity compensation) |
129 | Comparison with radiation reference standard |
130 | Optical system structure (e.g., lens) |
132 | Sensor or mounting temperature control |
133 | Ambient temperature compensated (e.g., dummy sensor) |
134 | Extrapolation (e.g., simulation, heat flow) |
135 | By fluid flow within or to sensor (e.g., convection, heat transfer, differential pressure) |
136 | Geophysical (e.g., well bore, underwater) |
137 | Temperature distribution or profile |
138 | With fluid flow deflector |
139 | Of molten metal |
141 | Combined with diverse art device |
142 | With other measuring device |
144 | With combustion engine |
147 | With fluid carrying conduit (e.g., shower pipe) |
149 | With cooking compartment or door thereof (e.g., oven) |
150 | With bottle (e.g., nursing) |
151 | With confection or infant pacifier |
152 | With electrical component (e.g., transformer) |
153 | With roll or rotary specimen or support |
155 | With percing element |
156 | With float |
157 | With sampling cup |
158 | With removable cover for sensor (e.g., disposable sheath) |
159 | Nonelectrical, nonmagnetic, or nonmechanical temperature responsive property |
163 | By electrical or magnetic heat sensor |
164 | With preheated sensing probe |
165 | With heat exchanger or conductor |
166 | At plural zones |
168 | With self-rebalancing arrangement (e.g., servo-potentiometer, thermal link) |
169 | With thermal lag compensation |
170 | Digital output |
172 | With compensation for sensor nonlinearity or lead impedance |
174 | By conductive fluid or work function within sensor (e.g., ionization) |
175 | Thermal noise generated in conductor |
176 | Including sensor having hysteresis or cryogenic property (e.g., ferromagnetism, superconductivity) |
178 | By barrier layer sensing element (e.g., semiconductor junction) |
179 | By thermoelectric potential generator (e.g., thermocouple) |
180 | Specimen is part of thermoelectric circuit |
181 | Reference junction compensation |
182 | Reference junction temperature control |
183 | By current modifying sensor |
186 | With specified recording arrangement |
187 | Mechanical (e.g., expansion or contraction of materials) |
188 | Having electrical indication |
189 | Plural zones (e.g., indoor-outdoor) |
190 | Indicating tube type |
191 | With optical element (e.g., magnifying) |
192 | With holder for shaking |
193 | Having specified cross section |
194 | With support or housing |
195 | With detail of motion transmitting mechanism |
196 | One sensing element within another |
197 | With compensation |
198 | With adjustment |
201 | Expanding fluid |
204 | Multiple distinct sensing elements |
205 | Compound sensing element (e.g., bimetallic) |
208 | HOUSING, SUPPORT, OR ADJUNCT |
210 | MISCELLANEOUS |
E-SUBCLASSES | ||
The following subclasses beginning with the letter E are E-subclasses. Each E-subclass corresponds in scope to a classification in a foreign classification system, for example, the European Classification system (ECLA). The foreign classification equivalent to an E-subclass is identified in the subclass definition. In addition to US documents classified in E-subclasses by US examiners, documents are regularly classified in E-subclasses according to the classification practices of any foreign Offices identified in parentheses at the end of the title. For example, "(EPO)" at the end of a title indicates both European and US patent documents, as classified by the EPO, are regularly added to the subclass. E-subclasses may contain subject matter outside the scope of this class.Consult their definitions, or the documents themselves to clarify or interpret titles. |
E19.001 | TESTING OR CALIBRATING CALORIMETERS (EPO) |
E17.001 | MEASURING QUANTITY OF HEAT (EPO) |
E17.002 | For measuring the power of light beams, e.g., laser beams, etc. (EPO) |
E17.003 | Microcalorimeters, e.g., using silicon microstructures, etc. (EPO) |
E17.004 | Calorimeters using transport of an indicating substances, e.g., evaporation calorimeters, etc. (EPO) |
E17.005 | Where evaporation, sublimation or condensation caused by heating or cooling, is measured (EPO) |
E17.006 | Calorimeters using compensation methods (EPO) |
E17.007 | Measuring quantity of heat conveyed by flowing mediums, e.g., in heating systems, etc. (EPO) |
E17.008 | Based upon measurement of temperature difference (EPO) |
E17.009 | Between an inlet and an outlet point, combined with measurement of rate of flow of the medium if such, by integration during a certain time-interval (EPO) |
E17.01 | Indicating product of flow and temperature difference directly (EPO) |
E17.015 | Across a radiating surface, combined with ascertainment of the heat transmission coefficient (EPO) |
E15.001 | TESTING OR CALIBRATING OF THERMOMETERS (EPO) |
E7.001 | MEASURING TEMPERATURE BASED ON THE USE OF ELECTRIC OR MAGNETIC ELEMENTS DIRECTLY SENSITIVE TO HEAT (EPO) |
E7.002 | Using pyroelectric elements (EPO) |
E7.003 | Using superconductive elements (EPO) |
E7.004 | Using thermoelectric elements, e.g., thermocouples, etc. (EPO) |
E7.005 | Provided with specially adapted connectors (EPO) |
E7.006 | Expendable thermocouples (EPO) |
E7.007 | Arrangements for signaling rupture or disconnection of the thermocouple (EPO) |
E7.008 | Using microstructures, e.g., made of silicon, etc. (EPO) |
E7.009 | The object to be measured not forming one of the thermo-electric materials (EPO) |
E7.01 | The thermo-electric materials being arranged one within the other with the junction at one end exposed to the object, e.g., sheathed type, etc. (EPO) |
E7.011 | The object to be measured forming one of the thermo-electric materials, e.g. pointed type, etc. (EPO) |
E7.012 | Arrangements for compensating for auxiliary variables, e.g., length of lead, etc. (EPO) |
E7.013 | Arrangements with respect to the cold junction, e.g., preventing influence of temperature of surrounding air, etc. (EPO) |
E7.015 | Arrangements for modifying the output characteristic, e.g., linearizing, etc. (EPO) |
E7.016 | Particular circuit arrangements (EPO) |
E7.018 | Using resistive elements (EPO) |
E7.019 | The element being an electrolyte (EPO) |
E7.021 | The element being a linear resistance, e.g., platinum resistance thermometer, etc. (EPO) |
E7.022 | Characterized by the use of the resistive element (EPO) |
E7.023 | Using microstructures (EPO) |
E7.024 | In a specially-adapted circuit, e.g., bridge circuit, etc. (EPO) |
E7.028 | The element being a non-linear resistance, e.g., thermistor, etc. (EPO) |
E7.034 | Using thermal noise of resistances or conductors (EPO) |
E7.035 | Using semiconducting elements having PN junctions (EPO) |
E7.037 | Using capacitative elements (EPO) |
E7.039 | Using magnetic elements, e.g., magnets, coils, etc. (EPO) |
E7.041 | Using ionization of gases (EPO) |
E7.042 | Circuits for reducing thermal inertia; Circuits for predicting the stationary value of temperature (EPO) |
E3.001 | THERMOMETERS GIVING RESULTS OTHER THAN MOMENTARY VALUE OF TEMPERATURE (EPO) |
E3.002 | Circuits arrangements for indicating a predetermined temperature (EPO) |
E3.003 | Giving means values; giving integrated values (EPO) |
E3.006 | Giving differences of values; giving differentiated values (EPO) |
E9.001 | MEASURING TEMPERATURE BASED ON MOVEMENTS CAUSED BY REDISTRIBUTION OF WEIGHT, E.G., TILTING THERMOMETER, ETC. (EPO) |
E5.001 | MEASURING TEMPERATURE BASED ON THE EXPANSION OR CONTRACTION OF A MATERIAL (EPO) |
E5.002 | The material being a liquid (EPO) |
E5.003 | Manufacturing of this particular type of thermometer (EPO) |
E5.004 | Details (EPO) |
E5.005 | Arrangements for driving back the liquid column (EPO) |
E5.006 | Capillary tubes (EPO) |
E5.007 | Containers for the liquid (EPO) |
E5.008 | Selection of liquid compositions (EPO) |
E5.009 | The liquid displacing a further liquid column or a solid body (EPO) |
E5.01 | With electric contacts (EPO) |
E5.011 | With electric conversion means for final indication (EPO) |
E5.012 | With provision for expansion indicating over not more than a few degrees, e.g., clinical thermometer, etc. (EPO) |
E5.014 | With means for indicating a maximum or a minimum or both (EPO) |
E5.015 | With provision for measuring the difference between two temperatures (EPO) |
E5.016 | With provision for adjusting zero point of scale, e.g., Beckmann thermometer, etc. (EPO) |
E5.017 | The material being a gas (EPO) |
E5.019 | The material being a fluid contained in a hollow body having parts which are deformable or displaceable under the pressure developed by the material (EPO) |
E5.02 | Selection of fluid compositions (EPO) |
E5.021 | Using a fluid container connected to the deformable body by means of a capillary tube (EPO) |
E5.022 | The body being a tubular spring, e.g., Bourdon tube, etc. (EPO) |
E5.025 | The body being a bellows (EPO) |
E5.026 | The body being a capsule (EPO) |
E5.027 | The body being a cylinder and piston (EPO) |
E5.028 | With electric conversion means for final indication (EPO) |
E5.03 | The material being a solid (EPO) |
E5.031 | Using materials with a configuration memory e.g., Ni-Ti alloys, etc. (EPO) |
E5.032 | Using microstructures, e.g., made of silicon, etc. (EPO) |
E5.033 | Arranged for free expansion or contraction (EPO) |
E5.035 | Consisting of pivotally-connected elements (EPO) |
E5.036 | Constrained so that expansion or contraction causes a deformation of the solid (EPO) |
E5.037 | The solid body being formed of compounded strips or plates, e.g., bimetallic strip, etc. (EPO) |
E5.038 | Details of the compounds system (EPO) |
E5.039 | Selection of composition of the components of the system (EPO) |
E5.04 | Shape of the system (EPO) |
E5.041 | Specially adapted for indicating or recording (EPO) |
E5.043 | The solid body being constrained at more than one point, e.g., rod, plate, diaphragm, etc. (EPO) |
E11.001 | MEASURING TEMPERATURE BASED UPON PHYSICAL OR CHEMICAL CHANGES NOT COVERED BY ANY OF THE PRECEDING SUBCLASSES (EPO) |
E11.002 | Using absorption or generation of gas, e.g., hydrogen, etc. (EPO) |
E11.003 | Using measurement of the effect of a material on microwaves or longer electromagnetic waves, e.g., measuring temperature via microwaves emitted by the object, etc. (EPO) |
E11.004 | Using evaporation or sublimation, e.g., by observing boiling, etc. (EPO) |
E11.005 | From material contained in a hollow body having parts which are deformable or displaceable under the pressure developed by the vapor (EPO) |
E11.006 | Using melting, freezing, or softening (EPO) |
E11.008 | Using sintering (EPO) |
E11.009 | Using measurement of acoustic effects (EPO) |
E11.013 | Using measurements of density (EPO) |
E11.014 | Using measurement of the effect of a material on X-radiation, gamma radiation or particle radiation (EPO) |
E11.015 | Using changes in transmission, scattering or fluorescence in optical fibers (EPO) |
E11.018 | Using change of color or translucency (EPO) |
E11.019 | Using change in reflectance (EPO) |
E11.02 | Of inorganic materials (EPO) |
E11.021 | Of organic materials (EPO) |
E11.023 | Of materials which change translucency (EPO) |
E11.024 | Using thermo-luminescent materials (EPO) |
E13.001 | ADAPTATIONS OF THERMOMETERS FOR SPECIFIC PURPOSES (EPO) |
E13.002 | For measuring body temperature (EPO) |
E13.004 | For cryogenic purposes (EPO) |
E13.006 | For measuring temperature of moving fluids or granular materials capable of flow (EPO) |
E13.008 | For measuring temperature of moving solid bodies (EPO) |
E13.011 | For measuring temperature within piled or stacked materials (EPO) |
E13.012 | Combined with sampling devices for measuring temperatures of samples of materials (EPO) |
E1.001 | DETAILS OF THERMOMETERS NOT SPECIALLY ADAPTED FOR PARTICULAR TYPES OF THERMOMETER (EPO) |
E1.002 | Special applications of indicating or recording means, e.g., for remote indications, etc. (EPO) |
E1.003 | Recording (EPO) |
E1.004 | For remote (EPO) |
E1.005 | Arrangements for monitoring a plurality of temperatures, e.g., by multiplexing, etc. (EPO) |
E1.006 | Arrangements for numerical indication (EPO) |
E1.007 | Scales (EPO) |
E1.011 | Protective devices, e.g., casings, etc. (EPO) |
E1.012 | For clinical thermometers, e.g., contamination preventing sleeves, etc. (EPO) |
E1.014 | For preventing chemical attack (EPO) |
E1.016 | For preventing damage due to heat overloading (EPO) |
E1.018 | Supports; Fastening devices; mounting thermometers in particular locations (EPO) |
E1.019 | For measuring surface temperatures, e.g., of pipe walls, etc. (EPO) |
E1.02 | Arrangements for moving thermometers to or from a measuring position (EPO) |
E1.021 | Special arrangements for conducting heat from the object to the sensitive element (EPO) |
E1.023 | Compensating for effects of temperature changes other than those to be measured, e.g., changes in ambient temperature, etc. (EPO) |
E1.024 | By means of fluid contained in a hollow body having parts which are deformable or displaceable under the pressure developed by the fluid (EPO) |
E1.025 | By means of compounded strips or plates, e.g., by bimetallic strips, etc. (EPO) |
E1.026 | Compensating for effects of pressure changes (EPO) |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|