|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 366 | AGITATING |
Click here for a printable version of this file |
1 | MORTAR MIXER TYPE |
2 | Methods |
9 | Gravity type |
10 | With gas incorporating; fluid mixing, delivering, or conveying |
14 | Plural mixing chambers |
16 | With ingredient proportioning |
17 | By condition sensing means |
18 | By weight |
19 | By volume |
20 | By screw conveyor charging means |
21 | By varying opening of charging means |
22 | With heating or drying |
26 | With elevating means |
27 | With dynamic charging and dynamic delivery |
30 | With dynamic charging |
40 | With liquid charge |
41 | Movable charge hopper or chute |
42 | With dynamic delivery |
43 | Including automatic control means |
44 | Rotatable mixing chamber reversible for delivery |
45 | Mixing chamber tiltable for delivery |
49 | Endless belt |
50 | Rotary screw |
51 | Pump |
52 | Scraper or deflector |
53 | Movable mixing chamber |
64 | Movable stirrer |
68 | Movable chute |
69 | RUBBER OR HEAVY PLASTIC WORKING |
70 | Candy puller type |
71 | Roll couple and scraper |
72 | Roll couple and work handler |
73 | Roll couple having adjustment means |
74 | Roll traveling within platen |
75 | With specified vent means |
76.1 | With specified feed means |
76.2 | Condition responsive |
76.3 | Screw feeder distinct from agitator |
76.5 | Roller feeder |
76.6 | Plural feed means |
76.7 | Piston feeder (e.g., ram) |
76.9 | Chute or hopper with gravity discharge |
76.93 | Including specific structure for controlling flow through the feed means |
77 | With specified discharge means |
78 | Rotating and reciprocating stirrer |
79 | Stirrer is through-pass screw conveyor |
80 | With deflector |
81 | With additional stirrer element on screw conveyor |
83 | Plural screw conveyors on separate shafts |
87 | And downstream breaker plate or screen |
88 | Including sections of different pitch |
89 | Varying diameter of shaft |
90 | Notched, apertured, or interrupted thread |
91 | Plural mixing chambers |
92 | With means to move mixing chamber |
96 | Stationary mixing chamber |
100 | Stirrer with specified drive means |
101 | BY INJECTING GAS INTO MIXING CHAMBER |
102 | With stirrer |
105 | Into rotating mixing chamber |
106 | Intermittent or pulsating feed |
107 | Plural gas feeders |
108 | BY VIBRATION |
109 | Including endless conveyor |
110 | Of holder for mixing chamber |
111 | Of platform or mixing chamber supported by vibrator |
113 | Vibrator mounted in aperture of mixing chamber bottom wall |
114 | Vibrator attached to mixing chamber wall or platform |
116 | With amplitude or frequency regulator |
117 | Of stirrer |
124 | Vibrator actuated by fluid under pressure |
127 | By electrostrictive or magnetostrictive transducer |
128 | By rotary movement of unbalanced-weight shaft |
129 | OPERATOR SUPPORTED |
131 | HAVING INTERRELATED FEED AND DISCHARGE MEANS |
132 | Including means to monitor or control operation |
133 | By single endless or screw conveyor |
134 | Plural feed or discharge means |
135 | Rotatable mixing chamber |
136 | Recirculating from and to mixing chamber |
137.1 | JET OR SPRAY IMPINGING FREE-FALLING STREAM |
138 | WITH FLUSHING OF MIXING CHAMBER |
139 | IN VACUUM CHAMBER |
140 | WITH SAMPLING |
141 | WITH WEIGHING |
142 | WITH TEST, SIGNAL, OR INDICATOR MEANS |
143 | WITH INSPECTION MEANS (E.G., WINDOW) |
144 | WITH HEATING OR COOLING |
145 | Including temperature control |
146 | Electrical heating |
147 | Medium in stirrer or mixing chamber |
148 | Of supply |
149 | Fluid-filled jacket |
150.1 | HAVING SPECIFIED FEED MEANS |
151.1 | Responsive to condition sensor |
151.2 | Responsive to location of mixing chamber |
152.1 | Proportioning plural material components |
152.5 | Responsive to viscosity |
152.6 | Responsive to level of material in feeder |
153.1 | Controlling level of material in mixing chamber |
153.2 | Layering |
153.3 | Endless conveyor |
154.1 | Agitation of material in feeder or supply reservoir |
154.2 | By vibration |
155.1 | Rotatable impeller |
158.5 | Stationary deflector |
159.1 | Returning material to supply |
160.1 | Adjustable mixing ratio control |
162.1 | Predetermined mixing ratio |
162.4 | Impinging jets |
163.1 | By suction |
165.1 | Material introduced so as to cause rotary motion in mixing chamber (e.g., cyclonic) |
165.2 | Including deflector in chamber (deflector may be part of chamber wall) |
165.3 | Rotating stirrer in chamber |
165.4 | Feed means having a flow regulator (e.g., valve or pump) |
165.5 | Manifold in feed means |
166.1 | Print washer type |
167.1 | Liquid injector within mixing chamber |
167.2 | Injector is rotatable body having internal material passage and peripheral outlet (e.g., slinger) |
168.1 | Including rotating stirrer |
168.2 | Driven by material feed |
169.1 | Fed through stirrer or stirrer drive shaft |
169.2 | Fed radially through side wall of shaft |
170.1 | Rotating mixing chamber |
170.2 | Plural coaxial rotating shafts |
170.3 | Passage through stirrer blade |
170.4 | Stationary feed conduit received within rotating stirrer or shaft |
171.1 | Including cooperating stationary element |
172.1 | Plural injectors |
172.2 | Injector directs material onto stirrer |
173.1 | Plural injectors |
174.1 | Deflector |
175.3 | Moving mixing chamber |
176.1 | Pump forces material through restriction (e.g., static emulsifier) |
177.1 | Plural related feeders having separate outlets to mixing chamber |
178.1 | Concentric |
178.2 | Feed means has plural identical outlets |
178.3 | Inner feeder passes through wall of outer feeder and extends along common axis at the wall |
179.1 | Intermittent feed |
180.1 | Rotating mixing chamber |
181.1 | Including chute or hopper with gravity discharge to mixing chamber |
181.4 | Rotating stirrer and cooperating stationary element |
181.5 | Stationary deflecting element in flow-through mixing chamber |
181.6 | Feed means has plural identical outlets |
181.7 | Feed to narrow space between stirrer and chamber wall |
181.8 | Fluid pump |
182.1 | Including specific structure for controlling flow through the feed means |
182.2 | Including pump |
182.3 | Including feed container having valved outlet |
182.4 | Including valve in feed conduit |
183.1 | Static conveyor with gravity discharge to mixing chamber |
184 | WITH SPECIFIED DISCHARGE MEANS |
185 | By tilting mixing chamber |
186 | By endless belt or screw conveyor |
187 | Rotatable or oscillatable mixing chamber |
189 | Batch discharge |
190 | By pump within mixing chamber |
191 | By suction or compressed air |
192 | Valve or gate |
194 | With rotatable or oscillatable stirrer |
197 | MIXING CHAMBER REMOVABLE FROM STIRRER AND SUPPORT |
198 | Plural supports |
199 | Removable power drive means |
200 | Support rotatable only |
202 | Support oscillatory only |
203 | Support rectilinearly reciprocable only |
204 | Mixing chamber mounted within container |
205 | Stirrer mounted through mixing chamber bottom wall |
206 | With motor control |
207 | Adjustable |
208 | BY MOVEMENT OF SUPPORT FOR REMOVABLE MIXING CHAMBER |
209 | Mixing chamber secured to support |
210 | Support oscillatory only |
212 | Support rectilinearly reciprocable only |
213 | Support rotatable only |
215 | Support pivotally mounted by plural linkage |
216 | Support oscillatory with additional motion |
217 | Support rotates about plural axes |
218 | Mixing chamber conveyed by support during agitation |
219 | BY MOVEMENT OF MIXING CHAMBER RELATIVE TO STATIONARY SUPPORT |
220 | Mixing chamber rotatable only |
221 | With scraper |
222 | Interrelated stirrer and mixing chamber drive |
224 | With rotatable stirrer |
225 | With deflector |
232 | Mixing chamber supported by shaft at one end only |
233 | Roller or suspended support for mixing chamber |
234 | Foraminous mixing chamber |
235 | Plural mixing chambers |
236 | Rectangular mixing chamber |
237 | Mixing chamber oscillating only |
239 | Mixing chamber rocking only |
240 | Mixing chamber rectilinearly reciprocating only |
241 | STIRRER WITHIN STATIONARY MIXING CHAMBER |
242 | Mounted in removable mixing chamber closure |
261 | With means to move stirrer and support |
262 | Pump type |
271 | Endless conveyor with paddles |
272 | Gear-type stirrer |
273 | Magnetic stirrer |
275 | Flexible diaphragm |
276 | Oscillatory stirrer |
279 | Rotatable stirrer |
280 | With movable element actuated by material |
281 | With support for attachment to mixing chamber rim |
285 | Adjustable |
287 | Planetary |
289 | Also axially reciprocable |
290 | In at least one of intercommunicating adjacent mixing chambers |
292 | Plural stirrers |
302 | Having cooperating stationary element |
303 | Interdigitating |
305 | Cylindrical or conical stirrer or element |
306 | Element mounted on mixing chamber end wall |
307 | Element mounted on cylindrical mixing chamber wall |
308 | Collapsible articulated stirrer |
309 | Including scraper, wiper, or brush |
310 | Helical type |
311 | Pivotally mounted on noncoincident axis |
312 | Plural distinct scraping edges or wiping surfaces |
314 | Mounted in mixing chamber bottom wall |
315 | Disk-type stirrer |
318 | Screw-type stirrer |
319 | With additional agitator elements on screw |
320 | Openwork helical ribbon |
321 | Opposite pitch |
322 | Discontinuous screw |
323 | Varying diameter of convolutions or shank or varying pitch |
324 | Apertured or notched |
325.1 | Relatively fixed plural elements |
325.2 | Pinlike radially projecting element |
325.3 | Spiral arrangement |
325.4 | Element mounted parallel to shaft, spaced therefrom, and having at least one free end |
325.6 | Looped wirelike element |
325.7 | Openwork having element supported by central shaft at opposite ends |
325.92 | Flat element having major surface lying in plane substantially including shaft axis (e.g., paddle type) |
325.94 | Openwork having substantially no central shaft |
326.1 | Adjustable or flexible |
327.1 | Of different pitch |
327.4 | Oppositely pitched element sections |
328.1 | Notched element |
328.2 | Apertured element |
329.1 | Diverse size or shape |
330.1 | Axially directing blade (e.g., propeller, helix section, etc.) |
331 | With specified mounting means |
332 | Rectilinearly reciprocable stirrer |
336 | STATIONARY DEFLECTOR (DIVIDING AND RECOMBINING TYPE) IN FLOW-THROUGH MIXING CHAMBER |
337 | Angularly related flat surfaces |
338 | Curved deflector surface |
340 | Plate or block being apertured, notched, or truncated in shape |
341 | STATIONARY MIXING CHAMBER |
342 | AGITATOR |
347 | COVER OR SHIELD FOR MIXING CHAMBER |
348 | METHOD |
349 | MISCELLANEOUS |
CROSS-REFERENCE ART COLLECTIONS | ||
600 | BODINE VIBRATOR |
601 | MOTOR CONTROL |
602 | AMALGAM MIXER, E.G., DENTAL FILLING |
603 | ANIMAL FOOD MIXER |
604 | LATHER MAKER |
605 | PAINT MIXER |
606 | TRACTOR-MOUNTED MORTAR MIXING CHAMBER |
607 | CHAIN-TYPE STIRRER |
608 | STIRRER IN MIXING CHAMBER SIDE WALL |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
DIGESTS | ||
DIG1 | MICROMIXERS: CONTINUOUS LAMINAR FLOW WITH LAMINAR BOUNDARY MIXING IN THE LINEAR DIRECTION PARALLEL TO THE FLUID PROPAGATION WITH OR WITHOUT CONDUIT GEOMETRY INFLUENCES FROM THE PATHWAY |
DIG2 | MICROMIXERS: SEGMENTED LAMINAR FLOW WITH BOUNDARY MIXING ORTHOGONAL TO THE DIRECTION OF FLUID PROPAGATION WITH OR WITHOUT GEOMETRY INFLUENCES FROM THE PATHWAY |
DIG3 | MICROMIXERS: VARIABLE GEOMETRY FROM THE PATHWAY INFLUENCES MIXING/AGITATION OF NON-LAMINAR FLUID FLOW |
DIG4 | MICROMIXERS: WITH APPLICATION OF ENERGY TO INFLUENCE MIXING/AGITATION (E.G., MAGNETIC, ELECTRICAL, E-M RADIATION, PARTICULATE RADIATION, OR ULTRASOUND) |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|