This page requires javascipt to function properly
1 SAFETY AND PROTECTION OF SYSTEMS AND DEVICES
2 . (1 indent ) Arc suppression at switching point (i.e., includes solid-state switch)
3 .. (2 indent ) Synchronized or sequential opening or closing
4 ... (3 indent ) Counter electromotive force
5 ... (3 indent ) With current sensitive control circuit
6 ... (3 indent ) With voltage sensitive control circuit
7 ... (3 indent ) With combined voltage and current sensitive control circuit
8 ... (3 indent ) Shunt bypass
9 .... (4 indent ) With sequentially inserted impedance
10 .. (2 indent ) By inserting series impedance
11 ... (3 indent ) Nonlinear impedance
12 ... (3 indent ) By arc stretching (e.g., horn gap)
13 .. (2 indent ) Shunt bypass of main switch
14 .. (2 indent ) Arc blowout for main breaker contact (e.g., electromagnet, gas, fluid, etc.)
15 . (1 indent ) Capacitor protection
16 .. (2 indent ) Series connected capacitors
17 .. (2 indent ) Shunt connected capacitors
18 . (1 indent ) Voltage regulator protective circuits
19 . (1 indent ) Superconductor protective circuits
20 . (1 indent ) Generator protective circuits
21 .. (2 indent ) Voltage responsive
22 . (1 indent ) Compressor protective circuits
23 . (1 indent ) Motor protective condition responsive circuits
24 .. (2 indent ) Current and temperature
25 .. (2 indent ) Motor temperature
26 ... (3 indent ) With bimetallic sensor
27 ... (3 indent ) With thermistor sensor
28 .. (2 indent ) With time delay
29 ... (3 indent ) During energization of motor
30 .. (2 indent ) Current and voltage
31 .. (2 indent ) Current
32 ... (3 indent ) Bimetallic element
33 .. (2 indent ) Voltage
34 ... (3 indent ) Bimetallic element
35 . (1 indent ) Transformer protection
36 .. (2 indent ) With differential sensing means
37 .. (2 indent ) With temperature or pressure sensing means
38 .. (2 indent ) Transformer with structurally combined protective device
39 ... (3 indent ) With lightning arrester and fuse
40 ... (3 indent ) With lightning arrester (e.g., spark gap)
41 ... (3 indent ) With fuse
42 . (1 indent ) Ground fault protection
43 .. (2 indent ) Fault suppression (e.g., Petersen coil)
44 .. (2 indent ) With differential sensing in a polyphase system
45 .. (2 indent ) With differential sensing in a single phase system
46 ... (3 indent ) With more than two wires
47 .. (2 indent ) In a polyphase system
48 ... (3 indent ) With more than three wires
49 .. (2 indent ) In a single phase system
50 ... (3 indent ) With more than two wires
51 . (1 indent ) Overspeed responsive
52 . (1 indent ) By regulating source or load (e.g., generator field killed)
53 .. (2 indent ) Prime mover control
54 . (1 indent ) Load shunting by fault responsive means (e.g., crowbar circuit)
55 .. (2 indent ) Disconnect after shunting
56 .. (2 indent ) Voltage responsive
57 .. (2 indent ) Current responsive
58 . (1 indent ) Impedance insertion
59 . (1 indent ) Circuit automatically reconnected only after the fault is cleared
60 .. (2 indent ) With differential voltage comparison across the circuit interrupting means
61 .. (2 indent ) Reclosing of the nonfaulty phases of a polyphase system
62 . (1 indent ) Feeder protection in distribution networks
63 .. (2 indent ) With current responsive fault sensor
64 ... (3 indent ) With communication between feeder disconnect points
65 .. (2 indent ) With current and voltage responsive fault sensors
66 ... (3 indent ) With communication between feeder disconnect points
67 . (1 indent ) Series connected sections with faulty section disconnect
68 .. (2 indent ) With communication between disconnect points
69 ... (3 indent ) Pilot wire communication
70 .. (2 indent ) Constant current system
71 . (1 indent ) Automatic reclosing
72 .. (2 indent ) With lockout means
73 ... (3 indent ) Including timer reset before lockout
74 .. (2 indent ) Continuous
75 ... (3 indent ) With time delay before reclosing
76 . (1 indent ) With phase sequence network analyzer
77 . (1 indent ) Reverse phase responsive
78 . (1 indent ) With specific quantity comparison means
79 .. (2 indent ) Voltage and current
80 ... (3 indent ) Distance relaying
81 .... (4 indent ) With communication means between disconnect points
82 ... (3 indent ) Reverse energy responsive (e.g., directional)
83 ... (3 indent ) With time delay protective means
84 .. (2 indent ) Reverse energy responsive (e.g., directional)
86 .. (2 indent ) Voltage
87 .. (2 indent ) Current
88 . (1 indent ) With specific voltage responsive fault sensor
89 .. (2 indent ) With time delay protective means
90 .. (2 indent ) Overvoltage and undervoltage
91.1 .. (2 indent ) Overvoltage
91.2 ... (3 indent ) With resistor sensor
91.3 ... (3 indent ) Including time delay
91.4 ... (3 indent ) Including photo-coupling (e.g., photo-receptors, photo-emitters, etc.)
91.5 ... (3 indent ) Including P-N junction (e.g., a diode, a zener diode, or transistor)
91.6 .... (4 indent ) With zener diode sensor
91.7 ... (3 indent ) Protection by snubber circuitry
91.8 ... (3 indent ) Protection for thyristor
92 .. (2 indent ) Undervoltage
93.1 . (1 indent ) With specific current responsive fault sensor
93.2 .. (2 indent ) Digital control
93.3 .. (2 indent ) Rating plug
93.4 .. (2 indent ) Automatic reset after trip
93.5 .. (2 indent ) Transformer and resistor sensors
93.6 .. (2 indent ) Transformer sensor (i.e., toroidal current sensor)
93.7 .. (2 indent ) Resistor sensor
93.8 .. (2 indent ) Thermal sensing
93.9 .. (2 indent ) Current limiting
94 .. (2 indent ) With time delay protective means
95 ... (3 indent ) With instantaneous override
96 .... (4 indent ) With multiple timing characteristics (e.g., short, long)
97 ... (3 indent ) With multiple timing characteristics
98 ... (3 indent ) Transistorized
99 ... (3 indent ) Combined thermal-electromagnetic relay
100 .. (2 indent ) With semiconductor circuit interrupter (e.g., SCR, Triac, Tunnel Diode, etc.)
101 ... (3 indent ) With transistor circuit interrupter
102 .. (2 indent ) With mechanical circuit breaker
103 . (1 indent ) Circuit interruption by thermal sensing
104 .. (2 indent ) With fuse
105 .. (2 indent ) With bimetallic element
106 .. (2 indent ) With thermistor
107 . (1 indent ) With specific transmission line (e.g., guarded)
108 .. (2 indent ) Plural conductors in single sheath (e.g., compound)
109 . (1 indent ) Too large fault makes breaker inoperative
110 . (1 indent ) Transient nonresponsive (e.g., ignores surge on transmission line)
111 . (1 indent ) Transient responsive
112 . (1 indent ) With space discharge means
113 . (1 indent ) With tuned circuit
114 . (1 indent ) With manual or automatic opening of breaker and manual reclose
115 . (1 indent ) With specific circuit breaker or control structure
116 .. (2 indent ) Pneumatically operated circuit breaker
117 . (1 indent ) High voltage dissipation (e.g., lightning arrester)
118 .. (2 indent ) Surge prevention (e.g., choke coil)
119 ... (3 indent ) In communication systems
120 .. (2 indent ) Vacuum or gas filled space discharge
121 .. (2 indent ) Fluid (e.g., mercury, quenching)
122 ... (3 indent ) Electrolytic
123 ... (3 indent ) Gas blast
124 .. (2 indent ) Thermal (e.g., fusible, bimetallic)
125 ... (3 indent ) With cutout (e.g., blowout type)
126 .. (2 indent ) Current limiting material in discharge path
127 ... (3 indent ) Nonlinear material (e.g., valve type)
128 .... (4 indent ) With plural gaps in discharge path
129 .. (2 indent ) Plural gaps with common electrode
130 .. (2 indent ) Plural gaps serially connected
131 .. (2 indent ) Combined (e.g., with disconnect switch)
132 ... (3 indent ) With line supporting insulator
133 .. (2 indent ) With magnetic means (e.g., electromagnet)
134 ... (3 indent ) Arc stretching (e.g., blowout)
135 .... (4 indent ) By separating contacts
136 ... (3 indent ) For grounding line
137 .. (2 indent ) Horn gap
138 ... (3 indent ) With resistance insertion
139 CONTROL CIRCUITS FOR ELECTROMAGNETIC DEVICES
140 . (1 indent ) Including compensation for thermal change of electromagnetic device
141 . (1 indent ) Including superconductivity
142 . (1 indent ) Including housing
143 . (1 indent ) Systems for magnetizing, demagnetizing, or controlling the magnetic field
144 .. (2 indent ) For lifting or holding
145 ... (3 indent ) Magnetic chuck-type
146 .. (2 indent ) Systems for magnetic field stabilization or compensation
147 .. (2 indent ) With permanent magnet
148 ... (3 indent ) Calibration or permanent magnet
149 .. (2 indent ) Demagnetizing
150 ... (3 indent ) Television degaussing
151 ... (3 indent ) Magnetic tape
152 .. (2 indent ) Including particular drive circuit
153 ... (3 indent ) Pulse initiated
154 ... (3 indent ) Including means to establish plural distinct current levels (e.g., high, low)
155 .... (4 indent ) With capacitor charging or discharging through coil
156 ... (3 indent ) With capacitor charging or discharging through coil
157 . (1 indent ) Including instrument (e.g., meter-relay)
158 .. (2 indent ) Temperature indicating instrument
159 . (1 indent ) Including means for using, or compensating for, the induced EMF of the electromagnetic device
160 . (1 indent ) For relays or solenoids
161 .. (2 indent ) Including thermal device
162 ... (3 indent ) Thermoelectric
163 ... (3 indent ) Bimetallic element
164 .... (4 indent ) Including heater
165 ... (3 indent ) Thermistor
166 .. (2 indent ) Plural relays or solenoids sequentially operated
167 ... (3 indent ) Alternately operated
168.1 ... (3 indent ) Pulse responsive
169.1 .... (4 indent ) Including electronic element
170 .. (2 indent ) Condition responsive (e.g., external circuit condition)
171 ... (3 indent ) Code responsive
172 .... (4 indent ) Including electronic element
173 ... (3 indent ) Light
174 .... (4 indent ) Light sensor controls its light path
175 .... (4 indent ) Including electronic element
176 .... • (5 indent ) Plural light sensors
177 .... (4 indent ) Plural light sensors
178 ... (3 indent ) Fluid (e.g., liquid level, humidity)
179 ... (3 indent ) Proximity or contact
180 .... (4 indent ) Metal presence or absence responsive
181 .... (4 indent ) Capacitance change-type
182 ... (3 indent ) Frequency (e.g., audio, radio)
183 .... (4 indent ) Plural relays or solenoids as loads
184 .... (4 indent ) Specific frequency responsive relay
185 ... (3 indent ) Phase
186 ... (3 indent ) Pulse
187 ... (3 indent ) Voltage or current level discriminators
188 ... (3 indent ) Variable impedance
189 .. (2 indent ) Plural switches in control circuit
190 ... (3 indent ) Including electronic switch
191 .. (2 indent ) Plural relay or solenoid load selectively operated
192 ... (3 indent ) Including interlock
193 .... (4 indent ) Electronic interlock
194 .. (2 indent ) Holding means
195 .. (2 indent ) Time delay
196 ... (3 indent ) Including semiconductor device connected to timing element
197 .... (4 indent ) Threshold device (e.g., zener, schockley diode)
198 .... • (5 indent ) Including three or more electrodes (e.g., unijunction)
199 ... (3 indent ) Including electric discharge device
200 .... (4 indent ) Threshold device (neon tube)
201 .... • (5 indent ) Including thyratron
202 ... (3 indent ) Electromechanical delay means
203 .. (2 indent ) With oscillator
204 .. (2 indent ) With magnetic amplifier or saturable reactor
205 .. (2 indent ) Threshold device (e.g., SCR, thyratron)
206 .. (2 indent ) Particular relay or solenoid
207 ... (3 indent ) Electrostatic
208 ... (3 indent ) Polarized
209 ... (3 indent ) Alternating current type
210 ... (3 indent ) Plural coils
211 CONTROL CIRCUITS FOR NONELECTROMAGNETIC TYPE RELAY (E.G., THERMAL RELAYS)
212 DISCHARGING OR PREVENTING ACCUMULATION OF ELECTRIC CHARGE (E.G., STATIC ELECTRICITY)
213 . (1 indent ) By charged gas irradiation
214 . (1 indent ) Of paper or paper handling machine
215 . (1 indent ) Of storage or hazardous area or fluid handling
216 . (1 indent ) Structurally combined with building or vehicle
217 .. (2 indent ) With external structure of vehicle
218 ... (3 indent ) Aircraft
219 ... (3 indent ) Chain-type grounding means
220 . (1 indent ) Specific conduction means or dissipator
221 .. (2 indent ) Brush- or roller-type structure
222 .. (2 indent ) Rod-type structure
223 .. (2 indent ) Shoe type
224 ... (3 indent ) Integral with shoe
225 ELECTRIC CHARGING OF OBJECTS OR MATERIALS
226 . (1 indent ) Particulate matter (e.g., liquids with suspended particles)
227 .. (2 indent ) For spray production
228 ... (3 indent ) Liquid type
229 . (1 indent ) By charged gas irradiation
230 ELECTRIC CHARGE GENERATING OR CONDUCTING MEANS (E.G., CHARGING OF GASES)
231 . (1 indent ) Modification of environmental electric charge
232 . (1 indent ) For application to living beings
233 . (1 indent ) Use of forces of electric charge or field
234 .. (2 indent ) Pinning
235 . (1 indent ) With specific power supply
236 ELECTRICAL SPEED SIGNAL PROCESSING SYSTEMS
237 . (1 indent ) With centrifugal weight means
238 . (1 indent ) Antislip detection and circuitry
239 . (1 indent ) With speed analog electrical signal
240 . (1 indent ) Including frequency generators
241 . (1 indent ) Two position (e.g., on-off)
242 . (1 indent ) With speed comparison
243 . (1 indent ) Synchronization of shafts
244 .. (2 indent ) Phase comparison
246 . (1 indent ) Automatic
248 . (1 indent ) For explosive devices
249 .. (2 indent ) With sequential firing by electronic switching
250 .. (2 indent ) With sequential firing by mechanical switching
251 .. (2 indent ) With capacitor discharging into explosive device
252 .. (2 indent ) With electromechanical power source
253 . (1 indent ) For electric spark ignition
254 .. (2 indent ) With electromagnet control means
255 ... (3 indent ) Including spark electrode make-break
256 .. (2 indent ) With capacitor discharging into sparking transformer
257 .. (2 indent ) With capacitor discharge into spark gap
258 .. (2 indent ) With electromechanical generator
259 ... (3 indent ) With permanent magnet
260 ... (3 indent ) With piezoelectric element
261 .. (2 indent ) With mechanical arrangement for spark electrode make-break
262 .. (2 indent ) With one spark electrode which is hand held
263 .. (2 indent ) With spark coil or transformer
264 . (1 indent ) For incandescent ignition
265 .. (2 indent ) With electromagnet control means
266 .. (2 indent ) With helical heating element
267 DEMAGNETIZING SYSTEMS AND PROCESSES
268 TRANSFORMERS AND INDUCTORS WITH INTEGRAL SWITCH, CAPACITOR, OR LOCK (E.G., IGNITION COIL)
269 . (1 indent ) With lock for preventing unauthorized use
270 . (1 indent ) With capacitor element
271 ELECTROSTATIC CAPACITORS
272 . (1 indent ) With protection or compensating means
273 .. (2 indent ) Self-healing
274.1 .. (2 indent ) Temperature
274.2 ... (3 indent ) With fluid cooling means
274.3 ... (3 indent ) With heat sink
275.1 .. (2 indent ) For electrical irregularities
275.2 ... (3 indent ) With over-pressure breakaway fuse
275.3 ... (3 indent ) With resistance element
275.4 ... (3 indent ) With thermal fuse
276 . (1 indent ) Cryogenic
277 . (1 indent ) Variable
278 .. (2 indent ) With significant electrode or terminal feature
279 .. (2 indent ) Gas or vacuum dielectric
280 .. (2 indent ) Responsive to external condition
281 ... (3 indent ) Electrical
282 ... (3 indent ) Thermal
283.1 ... (3 indent ) Pressure
283.2 .... (4 indent ) By displacement of stylus or lever
283.3 .... (4 indent ) By differential capacitor
283.4 .... (4 indent ) By diaphragm
284 ... (3 indent ) Liquid level
285 ... (3 indent ) Fluid flow
286 ... (3 indent ) Humidity
287 .. (2 indent ) Mechanically variable
288 ... (3 indent ) Push button
289 ... (3 indent ) Motor driven
290 ... (3 indent ) By varying distance between electrodes
291 .... (4 indent ) Compression type
292 ... (3 indent ) By varying effective area of electrode
293 .... (4 indent ) Disk trimmer
294 .... (4 indent ) Direct travel piston type
295 .... (4 indent ) Piston trimmer
296 .... (4 indent ) Sliding plates
297 .... (4 indent ) Spiral or helical plates
298.1 .... (4 indent ) Rotary plates
299.1 .... • (5 indent ) Plural capacitors
299.2 .... • . (6 indent ) Details of electrical connecting means (e.g., terminal or lead)
299.3 .... • . (6 indent ) Details of mounting means
299.4 .... • . (6 indent ) With adjustment means
299.5 .... • . (6 indent ) Details of insulator feature
298.2 .... • (5 indent ) Details of plate feature
298.3 .... • (5 indent ) Details of dielectric
298.4 .... • (5 indent ) Details of electrical connecting means (e.g., terminal or lead)
298.5 .... • (5 indent ) With adjustment means
300 ... (3 indent ) With controlling or indicating means
301.1 . (1 indent ) Fixed capacitor
301.2 .. (2 indent ) Special type (e.g., "bypass" type)
301.3 .. (2 indent ) Encapsulated
301.4 .. (2 indent ) Stack
301.5 .. (2 indent ) Wound
302 .. (2 indent ) Feed through
303 .. (2 indent ) Significant electrode feature
304 ... (3 indent ) Non-self-supporting electrodes
305 ... (3 indent ) Material
306.1 .. (2 indent ) Details of electrical connection means (e.g., terminal or lead)
306.2 ... (3 indent ) For decoupling type capacitor
306.3 ... (3 indent ) For multilayer capacitor
307 ... (3 indent ) Lead extends into body of capacitor
308.1 ... (3 indent ) Lead attached to edge of capacitor
308.2 .... (4 indent ) Cap
308.3 .... (4 indent ) Wire
309 .... (4 indent ) Metallized terminal
310 ... (3 indent ) Lead extends around at least a portion of capacitor
311 .. (2 indent ) Solid dielectric
312 ... (3 indent ) Plural dielectrics
313 .... (4 indent ) Layered
314 .... (4 indent ) Impregnated
315 .... • (5 indent ) With specific impregnant
316 .... • . (6 indent ) Including wax
317 .... • . (6 indent ) Including halogen (e.g., chlorinated)
318 .... • .. (7 indent ) With stabilizer or modifying substance
319 .... • (5 indent ) With stabilizer or modifying substance
320 .... (4 indent ) Ceramic and glass
321.1 ... (3 indent ) Ceramic, glass, or oxide particles
321.2 .... (4 indent ) With multilayer ceramic capacitor
321.3 .... • (5 indent ) Including metallization coating
321.4 .... • (5 indent ) Composition
321.5 .... (4 indent ) Composition
321.6 .... (4 indent ) With tubular capacitor
322 .... (4 indent ) Oxide film
323 ... (3 indent ) Plastic
324 ... (3 indent ) Fibrous or fabric (e.g., paper, etc.)
326 .. (2 indent ) Vacuum or gas dielectric
327 .. (2 indent ) Liquid dielectric
328 .. (2 indent ) Multiple capacitors
329 ... (3 indent ) Distinct physically
330 ... (3 indent ) Shared electrode
600 HOUSING OR MOUNTING ASSEMBLIES WITH DIVERSE ELECTRICAL COMPONENTS
601 . (1 indent ) For electrical power distribution systems and devices
602 .. (2 indent ) Distribution station (i.e., substation)
603 ... (3 indent ) Having transformer
604 ... (3 indent ) Gas insulated
605 .. (2 indent ) Electrical switchgear
606 ... (3 indent ) Truck type
607 .... (4 indent ) With interlock
608 ... (3 indent ) Drawer type
609 .... (4 indent ) With interlock
610 ... (3 indent ) Pivoted support means
611 ... (3 indent ) Busbar arrangements
612 .... (4 indent ) Gas insulated
613 .... (4 indent ) Liquid insulated
614 .... (4 indent ) With plural removable control units in housing
615 ... (3 indent ) With interlock
616 .... (4 indent ) Door or cover type
617 .... (4 indent ) Shutter type
618 ... (3 indent ) Gas insulated
619 ... (3 indent ) Having gas circuit breaker
620 ... (3 indent ) Having transformer
621 ... (3 indent ) Having isolating switch
622 .. (2 indent ) Distribution or control unit
623 ... (3 indent ) Having transformer
624 ... (3 indent ) Having busbar arrangement
625 ... (3 indent ) Portable
626 ... (3 indent ) Having fuse or relay
627 .. (2 indent ) Distribution or control panel board
628 ... (3 indent ) With switches and fuses
629 .... (4 indent ) Unit block
630 ... (3 indent ) With fuses
631 ... (3 indent ) With switches
632 .... (4 indent ) With switch actuating arrangements
633 ... (3 indent ) Plugboards
634 ... (3 indent ) With circuit breaker arrangements
635 .... (4 indent ) With discriminating means
636 .... (4 indent ) Plug-in or removable
637 ... (3 indent ) Busbar or conductor arrangements
638 .... (4 indent ) U-shaped member
639 .... (4 indent ) With horizontal busbar
640 .... (4 indent ) With removable or plug-in connection
641 .. (2 indent ) Electrical service distribution box
642 ... (3 indent ) With fuse
643 ... (3 indent ) With switch
644 ... (3 indent ) Including panel board
645 .... (4 indent ) Adjustable panel
646 .... (4 indent ) With fuse support means
647 .... (4 indent ) With switch support means
648 .... (4 indent ) Busbar arrangements
649 .... • (5 indent ) U-shaped member
650 .... • (5 indent ) Spaced parallel relationship
651 .... (4 indent ) Panel board corner mountings
652 .... (4 indent ) Circuit breaker supporting arrangements
653 .... • (5 indent ) With discriminating means
654 .... • (5 indent ) With tamper prevention means
655 .... • (5 indent ) Having two row arrangement
656 .... • (5 indent ) With plug-in circuit breakers
657 ... (3 indent ) With removable member
658 ... (3 indent ) With plastic enclosure or support
659 .. (2 indent ) For electricity service meter
660 ... (3 indent ) Plural
661 ... (3 indent ) With meter circuit controller
662 .... (4 indent ) Bypass arrangement
663 .... (4 indent ) With transformer or circuit breaker
664 ... (3 indent ) Meter mounting arrangements
665 .... (4 indent ) Adaptable meter supports
666 .... (4 indent ) Retractable or detachable meter support
667 .... (4 indent ) Removable cover
668 ... (3 indent ) Meter terminal and connector arrangements
669 .... (4 indent ) Terminal block
670 .... (4 indent ) Contact blade receiving structure
671 .... (4 indent ) Adjustable or adaptable contacts
672 ... (3 indent ) Tamper resistant
673 .. (2 indent ) Circuit breaker supporting means (i.e., attaching, mounting, etc.)
674 .. (2 indent ) For ballast elements
675 .. (2 indent ) Bus duct
676 .. (2 indent ) With cooling means
677 ... (3 indent ) Fluid
679.01 . (1 indent ) For electronic systems and devices
679.02 .. (2 indent ) Computer related housing or mounting assemblies
679.03 ... (3 indent ) Wearable computer structure
679.04 ... (3 indent ) Plural independently movable displays
679.05 ... (3 indent ) Telescoping display
679.06 ... (3 indent ) Display rotatable about plural axes
679.07 .... (4 indent ) About perpendicular axes
679.08 ... (3 indent ) For computer keyboard
679.09 .... (4 indent ) Portable computer type
679.1 .... • (5 indent ) Integrated pointing device; e.g., trackball, joystick
679.11 .... • (5 indent ) Adjustable keyboard
679.12 .... • . (6 indent ) Tiltable
679.13 .... • . (6 indent ) Collapsible key type
679.14 .... • . (6 indent ) Split keyboard
679.15 .... • . (6 indent ) Foldable keyboard
679.16 .... • .. (7 indent ) Plural foldable sections
679.17 .... • . (6 indent ) Detachable keyboard
679.18 .... (4 indent ) Integrated pointing device; e.g., trackball, joystick, etc.
679.19 .... (4 indent ) Hand, wrist or palm rest
679.2 .... (4 indent ) Adjustable
679.21 ... (3 indent ) For computer display
679.22 .... (4 indent ) Desktop type
679.23 .... • (5 indent ) With support for multimedia device; e.g., speaker, camera, microphone
679.24 .... • (5 indent ) With support for light protective shield
679.25 .... • (5 indent ) With document holder
679.26 .... (4 indent ) Portable computer type
679.27 .... • (5 indent ) Hinged or folding display; e.g., laptop computer display
679.28 .... • . (6 indent ) Electrically connected through hinge means
679.29 .... • . (6 indent ) Removable display
679.3 .... • (5 indent ) Handheld computer; e.g., personal digital assistant (PDA)
679.31 ... (3 indent ) For computer memory unit
679.32 .... (4 indent ) Expansion module type
679.33 .... (4 indent ) Disk drive type
679.34 .... • (5 indent ) External shock mounting/vibration damping
679.35 .... • . (6 indent ) Spring
679.36 .... • . (6 indent ) Elastomeric
679.37 .... • (5 indent ) Removable disk drive support
679.38 .... • (5 indent ) Ejectable
679.39 .... • (5 indent ) Slidable
679.4 ... (3 indent ) For input/output device
679.41 .... (4 indent ) Expansion/docking station
679.42 .... • (5 indent ) Motorized
679.43 .... • (5 indent ) Latching
679.44 .... • (5 indent ) Adjustable
679.45 .... (4 indent ) Port replicator
679.46 ... (3 indent ) With cooling means
679.47 .... (4 indent ) Plural diverse cooling means integrated into one system; e.g., fan with heat pipe or heat sink, etc.
679.49 .... • (5 indent ) With air flow enclosure; e.g., ducts, plenums, etc.
679.5 .... • . (6 indent ) Plurality of air streams
679.51 .... • (5 indent ) With baffle
679.52 .... (4 indent ) Heat pipe
679.53 .... (4 indent ) Liquid
679.54 .... (4 indent ) Thermal conduction; e.g., heat sink
679.55 ... (3 indent ) For portable computer
679.56 .... (4 indent ) Handheld; e.g., PDA
679.57 ... (3 indent ) With security means (i.e., locking structure)
679.58 ... (3 indent ) With latching mechanism
679.59 ... (3 indent ) Handle/foot support
679.6 ... (3 indent ) For desktop computer
679.61 .. (2 indent ) CRT type
688 .. (2 indent ) With cooling means
689 ... (3 indent ) Fluid
691 .... • (5 indent ) Pressurized or conditioned
692 .... • (5 indent ) Plural Openings
693 .... • . (6 indent ) Circular
694 .... • (5 indent ) With air circulating means
695 .... • . (6 indent ) Fan or blower
696 .... • .. (7 indent ) With heat exchanger unit
697 .... • .. (7 indent ) With heat sink or cooling fins
698 .... • (5 indent ) And liquid
699 .... (4 indent ) Liquid
700 .... • (5 indent ) Change of physical state
701 .... (4 indent ) With heat exchanger unit
702 .... (4 indent ) With cold plate or heat sink
703 .... (4 indent ) With cooling fins
704 ... (3 indent ) Thermal conduction
705 .... (4 indent ) By specific coating
706 .... • (5 indent ) Containing silicon or aluminum
707 .... (4 indent ) Through support means
708 .... • (5 indent ) Specific chemical compound or element
709 .... • (5 indent ) Heat sink
710 .... • . (6 indent ) Details
711 .... • . (6 indent ) Cooling plate or bar
712 .... • (5 indent ) Thermally and electrically conductive
713 .... • (5 indent ) Electrically insulating thermally conductive
714 .... (4 indent ) Through component housing
715 .... (4 indent ) For module
716 .... • (5 indent ) Plural
717 .... (4 indent ) For active solid state devices
718 .... • (5 indent ) For integrated circuit
719 .... • . (6 indent ) Circuit board mounted
720 .... (4 indent ) For printed circuit board
721 .... • (5 indent ) Plural
722 .... (4 indent ) For electronic circuit
723 .... (4 indent ) For lead frame
724 .. (2 indent ) Cabinet-type housing
725 ... (3 indent ) With retractable or readily detachable chassis
726 .... (4 indent ) With locking means or device
727 .... (4 indent ) Sliding component or commpartment
728 .. (2 indent ) Module
729 ... (3 indent ) Plural
730 .... (4 indent ) With housing
731 .... • (5 indent ) Interchangeable
732 .... • (5 indent ) Having lock or interlock
733 .... • (5 indent ) Selective connections
734 .... (4 indent ) With coupling or decoupling capacitor
735 .... (4 indent ) Stacked
736 ... (3 indent ) With printed circuit boards
737 .... (4 indent ) IC card or card member
738 .... (4 indent ) With resistor and capacitor
739 .... (4 indent ) With particular material
740 .... (4 indent ) With locking means or device
741 .... (4 indent ) Guiding means
742 .... (4 indent ) With spacer
743 .... (4 indent ) Solder connection
744 .... (4 indent ) Cordwood type
745 .... • (5 indent ) Welded connection
746 ... (3 indent ) With specific dielectric material or layer
747 ... (3 indent ) With locking means or device
748 .. (2 indent ) Printed circuit board
749 ... (3 indent ) Flexible board
750 .... (4 indent ) With specific dielectric material or layer
751 .... (4 indent ) With particular conductive material or coating
752 ... (3 indent ) With housing or chassis
753 .... (4 indent ) Specific chassis or ground
754 .... (4 indent ) With ejector means
755 .... (4 indent ) Rotatable
756 .... (4 indent ) Guiding means
757 .... (4 indent ) With particular material
758 .... (4 indent ) With spacer
759 .... (4 indent ) With lock or interlock
760 ... (3 indent ) Connection of components to board
761 .... (4 indent ) Component within printed circuit board
762 .... • (5 indent ) With specific dielectric material or layer
763 .... • (5 indent ) Capacitor and electrical component
764 .... • (5 indent ) Integrated circuit
765 .... (4 indent ) By direct coating of components on board
766 .... • (5 indent ) Capacitor and resistor
767 .... (4 indent ) With mounting pad
768 .... • (5 indent ) Having leadless component
769 .... • (5 indent ) Having spring member
770 .... • (5 indent ) Having spacer
771 .... • (5 indent ) Having particular material
772 .... (4 indent ) With specific lead configuration
773 .... • (5 indent ) Shaped lead on components
774 .... • (5 indent ) Shaped lead on board
775 .... • (5 indent ) Busbar
776 .... • (5 indent ) Flexible connecting lead
777 .... (4 indent ) By specific pattern on board
778 .... • (5 indent ) Cross-connected
779 .... • (5 indent ) With specific connection material
780 .... (4 indent ) Different voltage layers
781 .... (4 indent ) With switch
782 .... (4 indent ) Having passive component
783 .... (4 indent ) Having semiconductive device
784 ... (3 indent ) Plural
785 .... (4 indent ) With separable connector or socket means
786 .... • (5 indent ) Having key connection
787 .... • (5 indent ) Having spring member
788 .... • (5 indent ) Having backplane connection
789 .... • (5 indent ) Having flexible connector
790 .... • (5 indent ) Stacked
791 .... • (5 indent ) Multiple contact pins
792 .... (4 indent ) Plural contiguous boards
793 .... • (5 indent ) Thick film component or material
794 .... • (5 indent ) Power, voltage, or current layer
795 .... • (5 indent ) Plural dielectric layers
796 .... (4 indent ) With housing or chassis
797 .... • (5 indent ) Storage or file cabinet
798 .... • (5 indent ) With ejector or extractor
799 .... • (5 indent ) Grounding Construction or Detail
800 .... • (5 indent ) With Shielding Structure
801 .... • (5 indent ) Specific latching or retaining device
802 .... • (5 indent ) Specific alignment or guide means
803 .... (4 indent ) Interconnection details
804 .... (4 indent ) Spacer details
805 .. (2 indent ) Matrix assembly
806 ... (3 indent ) Diode
807 .. (2 indent ) Component mounting or support means
808 ... (3 indent ) Mounting pad
809 ... (3 indent ) With discrete structure or support
810 ... (3 indent ) Plural mounting or support
811 ... (3 indent ) With passive components
812 ... (3 indent ) With particular insulation
813 .. (2 indent ) Lead frame
814 .. (2 indent ) Radio type
815 ... (3 indent ) Tube mounting
816 .. (2 indent ) Shielding
817 ... (3 indent ) For electronic tube
819 .. (2 indent ) For relay
820 .. (2 indent ) For semiconductor device
821 .. (2 indent ) For capacitor and inductor
822 . (1 indent ) Contact banks
823 . (1 indent ) Terminal block
824 .. (2 indent ) With protective device or unit
825 . (1 indent ) Support brackets
826 . (1 indent ) Wire distribution (e.g., harness, rack, etc.)
827 .. (2 indent ) With interconnecting cable
828 .. (2 indent ) With switchboard or switch
830 .. (2 indent ) With plurality of capacitors
831 .. (2 indent ) With cooling means
832 .. (2 indent ) With switchboard or switch
833 . (1 indent ) Fuse block
834 .. (2 indent ) Plural
835 . (1 indent ) Fuse pullout device
836 . (1 indent ) For transformer
837 . (1 indent ) For switch or fuse
500 ELECTROLYTIC SYSTEMS OR DEVICES
501 . (1 indent ) Coulometer (i.e., electrochemical timer)
502 . (1 indent ) Double layer electrolytic capacitor
503 . (1 indent ) Liquid electrolytic capacitor
504 .. (2 indent ) With significant electrolyte
505 ... (3 indent ) Salt solute
506 ... (3 indent ) Ethylene glycol
507 ... (3 indent ) With depolarizer
508 .. (2 indent ) Anode type electrode
509 ... (3 indent ) Aluminum or tantalum
510 ... (3 indent ) Anode riser
511 ... (3 indent ) Wound
512 .... (4 indent ) With separator
513 .... (4 indent ) With mounting means (e.g., anchoring means or clamping)
514 .... (4 indent ) With heat conductor (e.g., heat sink)
515 .... (4 indent ) With common conductor (e.g., stripline)
516 .. (2 indent ) Cathode type electrode (e.g., cathode casing)
517 .. (2 indent ) Casing
518 ... (3 indent ) With hermetic seal
519 ... (3 indent ) With header, cover, or endseal
520 .... (4 indent ) Significant electrical connection means (e.g., terminals or leads)
521 ... (3 indent ) With vent means
522 .. (2 indent ) Multiple capacitors
523 . (1 indent ) Solid electrolytic capacitor (e.g., dry electrolytic capacitor)
524 .. (2 indent ) Dielectric
525 .. (2 indent ) With significant electrolyte or semiconductor
526 ... (3 indent ) Paste or gel
527 ... (3 indent ) Organic salt (e.g., TCNQ)
528 .. (2 indent ) Anode type electrode
529 ... (3 indent ) Aluminum or tantalum
530 ... (3 indent ) Wound
531 .... (4 indent ) With lead conductor
532 .. (2 indent ) Cathode type electrode
533 ... (3 indent ) With significant lead
534 .. (2 indent ) With protection means
535 .. (2 indent ) Casing
536 ... (3 indent ) With hermetic seal
537 ... (3 indent ) With header, cover, or endseal
538 .... (4 indent ) Significant electrical connection means (e.g., terminals or leads)
539 .... (4 indent ) With potting
540 .. (2 indent ) With terminal
541 .. (2 indent ) Multiple capacitors
434 . (1 indent ) Systems (e.g., plural cells, standby exciting voltage)
435 . (1 indent ) Current interruption type (e.g., circuit breaker, D.C.-to-pulse converters)
436 . (1 indent ) Rectifiers
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collections listed below. These Collections contain ONLY foreign patents or non-patent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived.
SAFETY AND PROTECTION OF SYSTEMS AND DEVICES (361/1)
. (1 indent ) With specific voltage responsive fault sensor (361/88)
FOR100 .. (2 indent ) Overvoltage (361/91)
SAFETY AND PROTECTION OF SYSTEMS AND DEVICES (361/1)
FOR101 . (1 indent ) With specific current responsive fault sensor (361/93)
HOUSING OR MOUNTING ASSEMBLIES WITH DIVERSE ELECTRICAL COMPONENTS (361/600)
FOR102 . (1 indent ) For electronic systems and devices (361/679)
FOR103 .. (2 indent ) Including keyboard support (361/680)
FOR104 .. (2 indent ) Including display support (361/681)
FOR105 ... (3 indent ) CRT support (361/682)
FOR106 .. (2 indent ) Computer related support (361/683)
FOR107 ... (3 indent ) Memory unit support (361/684)
FOR108 .... (4 indent ) Disk drive support (361/685)
FOR109 ... (3 indent ) Input/output device support (361/686)
FOR110 ... (3 indent ) With cooling means (361/687)
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Classification Support - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .