| Patents > Guidance, Tools, and Manuals > Classification > Class Schedule |
|
|
|
| Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
|
| You are viewing a USPC Schedule. |
|
| Class 310 | ELECTRICAL GENERATOR OR MOTOR STRUCTURE |
| Click here for a printable version of this file | |
![[List of Pre Grant Publications for class 310 subclass 1]](../as.gif) | ![[List of Patents for class 310 subclass 1]](../ps.gif) | 1 | EDUCATIONAL OR CONSTRUCTION UNITS OR KITS |
| | 300 | NON-DYNAMOELECTRIC |
| | 301 |  Nuclear reaction |
| | 302 |  Contact potential difference |
| | 303 | P-N semiconductor |
| | 304 | Secondary electron emission |
| | 305 | Direct charge particle emission |
| | 306 | Thermal or pyromagnetic |
| | 308 | Charge accumulating |
| | 311 | Piezoelectric elements and devices |
| | 312 | Adding or subtracting mass |
| | 313R | Surface acoustic wave devices |
| | 314 | Electrical systems |
| | 315 |  Temperature compensation circuits |
| | 316.01 | Input circuit for simultaneous electrical and mechanical output from piezoelectric element |
| | 317 | Input circuit for mechanical output from piezoelectric element |
| | 318 | Input circuit for electrical output from piezoelectric element |
| | 319 | Electrical output circuit |
| | 320 | Piezoelectric slab having different resonant frequencies at different areas |
| | 321 | Combined with resonant structure |
| | 322 | Acoustic wave type generator or receiver |
| | 323.01 | Direct mechanical coupling |
| | 323.02 |  Motor producing continual motion |
| | 323.03 |  Traveling wave motor |
| | 323.12 | Langevin or pencil type motor |
| | 323.16 | Eliptical motion at fixed point (i.e., walking) or Ratchet and Pawl motor |
| | 323.17 | Positions an object |
| | 323.18 | Device performs work on an object (e.g., welding, cutting) |
| | 323.19 | Horn or transmission line |
| | 323.21 | Detector (e.g., sensor) |
| | 324 | Diaphragm |
| | 325 | Sandwich or Langevin type |
| | 326 | Combined with damping structure |
| | 328 | With mechanical energy coupling means |
| | 329 | Including inertia type operator |
| | 330 | Bending type |
| | 333 | Shear or torsional type |
| | 334 | Acoustic wave type generator or receiver |
| | 338 | Force or pressure measuring type |
| | 339 | Voltage, spark or current generator |
| | 340 | Encapsulated or coated |
| | 341 | With temperature modifier and/or gas or vapor atmosphere control |
| | 345 | Supported by elastic material |
| | 346 | With temperature compensating structure |
| | 348 | With mounting or support means |
| | 357 | Orientation of piezoelectric polarization |
| | 360 | Rotation of crystal axis (e.g., cut angle) |
| | 363 | Electrode materials |
| | 365 | Electrode arrangement |
| | 367 | Piezoelectric element shape |
| | 10 | DYNAMOELECTRIC |
| | 11 | Conducting fluid |
| | 15 | Reciprocating |
| | 16 | With cooling or temperature modification |
| | 17 | With other elements |
| | 25 | Reed type |
| | 26 | Magnetostrictive |
| | 27 | Fixed and movable wound elements |
| | 28 | Direct-connected |
| | 31 | Self-actuated interrupter |
| | 36 | Oscillating |
| | 12.01 | Linear |
| | 12.02 | Having structure to facilitate assembly |
| | 12.03 | Micromachine (e.g., MEMS device, nanotechnology) |
| | 12.04 | Specific use device |
| | 12.05 | X-Y positioner |
| | 12.07 | Projector (e.g., rail gun) |
| | 12.08 | Disk drive head motor |
| | 12.09 | Rail vehicle (e.g., train, trolley) |
| | 12.11 | Conveyor or elevator motor |
| | 12.12 | Generator |
| | 12.13 | Plural dynamoelectric machines (e.g., motors, generators) |
| | 12.14 | Motor having both linear and rotary movement |
| | 12.15 | Plural stators or movable elements |
| | 13 | Fixed and movable wound element type |
| | 14 | Solenoid and core type |
| | 12.16 | Voice coil type |
| | 12.17 | Stepping or linear pulse type |
| | 12.18 | Synchronous type (e.g., variable reluctance) |
| | 12.19 | Having structure to facilitate control (e.g., position detector) |
| | 12.21 | Coil structure |
| | 12.24 | Magnet or pole structure |
| | 12.27 | Mechanical element |
| | 40R | Rotary |
| | 40.5 | Self-nutating or moving (e.g., oscillating fan, etc.) |
| | 41 | With mechanical starters |
| | 43 | Molded plastic |
| | 44 | Powdered metal |
| | 45 | Impregnated or coated |
| | 46 | Magnetic motors |
| | 47 | Portable or hand tool (e.g., dry shavers) |
| | 48 | With other elements |
| | 49.01 | Stepping |
| | 49.02 | Having a coil axially concentric to rotor axis (e.g., toroid coil) |
| | 49.03 | With bias magnet to position rotor (e.g., parking magnet, auxiliary flux) |
| | 49.05 | Axially adjacent to rotor end |
| | 49.08 | Having poles extending to opposite radial sides of rotor |
| | 49.09 | Having poles extending to opposite axial ends of rotor |
| | 49.11 | Having particular flux plate or yoke |
| | 49.13 | Having coil bobbin |
| | 49.15 | Having interfitting poles |
| | 49.18 | With rotary to linear conversion |
| | 49.19 | Having plural axially concentric coils |
| | 49.21 | Having a single axially concentric coil |
| | 49.22 | Axially thin type (e.g., disk-shaped motor, planer) |
| | 49.32 | Permanent magnet rotor with axially directed flux path |
| | 49.33 | Having stepping function related to a particular stator winding arrangement |
| | 49.34 | Having particular stator pole feature |
| | 49.37 | Having particular stator-pole to rotor-pole relationship |
| | 49.38 | Having plural rotor cores of different lengths |
| | 49.39 | Plural rotor sections (e.g., segmented rotor) |
| | 49.42 | Having dual axial air gaps |
| | 49.43 | Reluctance type |
| | 49.44 | Having a particular stator pole to rotor pole relationship |
| | 49.45 | Having a stepping function related to a particular stator winding arrangement |
| | 49.46 | Having stator with winding and permanent magnet |
| | 49.47 | Gearing defines stepping effect |
| | 49.51 | Plural stators define stepping effect |
| | 49.52 | Commutator defines stepping effect |
| | 49.53 | Permanent magnet defines stepping effect |
| | 49.54 | Windings define stepping effect |
| | 49.55 | Start or stop locating feature (e.g., parking magnet, detent) |
| | 50 | Portable or hand tool |
| | 51 | Vibration or noise suppression |
| | 52 | Cooling or fluid contact |
| | 53 | With control means |
| | 54 | Liquid coolant |
| | 55 | Nonatmospheric gas |
| | 56 | With gas purification or treating |
| | 57 | Intermediate confined coolant |
| | 58 | Circulation |
| | 66 | With other elements |
| | 67R | Inbuilt or incorporated unit |
| | 68R | Electric circuit elements |
| | 69 | Shaft-driven switch (e.g., blasting generators) |
| | 71 | Connectors, terminals or lead-ins |
| | 72 | Impedance devices |
| | 73 | Illuminating devices |
| | 68A | Manually operable (e.g., switches, rheostats, etc.) |
| | 68B | Condition responsive (e.g., position, torque, etc.) |
| | 68C | Temperature, current-responsive, i.e., protectors |
| | 68D | Conversion elements, (e.g., transformers, rectifiers, etc.) |
| | 68E | Motion responsive (e.g., centrifugal switches) |
| | 74 | Inertia or fly-wheel device |
| | 75R | Drive mechanism |
| | 76 | Brake and clutch |
| | 77 | Brake |
| | 78 | Clutch |
| | 79 | Shaft and armature timing or phasing connection |
| | 80 | Motion conversion |
| | 75A | Spring or gravity drive |
| | 75B | Hand- or foot-operated |
| | 75C | Rim drive (e.g., bicycle generator drive by wheel, rim, or tire) |
| | 75D | Flexible shaft or coupling and hollow shaft drive |
| | 85 | Mechanical shields or protectors |
| | 86 | Shield in air gap |
| | 87 | Submersible |
| | 88 | Dirt, moisture or explosion proof |
| | 89 | Housings, windows or covers |
| | 90 | Bearing or air-gap adjustment or bearing lubrication |
| | 91 | Supports |
| | 92 | Torque-transmitting clutches or brakes |
| | 93 | Brake type |
| | 94 | Automatic control |
| | 96 | With other drive mechanism |
| | 101 | Plural units |
| | 102R | Generator-motor type |
| | 103 | Magnetic field type |
| | 111 | Generated wave-form modification |
| | 112 | Plural units, structurally united |
| | 114 | Plural rotary elements |
| | 115 | Field and armature both rotate |
| | 124 | Plural short-circuited rotary elements |
| | 126 | Plural armatures in common field |
| | 127 | Plural collector-type machines |
| | 128 | Commutator and slip-ring type |
| | 129 | Synchronous or rotary converter |
| | 131 | Different armature circuits |
| | 133 | Common armature winding |
| | 135 | Commutator in field circuit |
| | 136 | Plural commutator type |
| | 143 | Plural slip-ring sets |
| | 148 | Plural sets of brushes |
| | 152 | Permanent magnet machines |
| | 153 | Inbuilt with flywheel (magneto) |
| | 154.01 | Permanent magnet stator |
| | 154.02 | Combined with generating coil |
| | 154.03 | Means for securing magnet |
| | 154.04 | Cantilevered |
| | 154.05 | Axial |
| | 154.07 | Adhesive |
| | 154.08 | Mounted to magnet yoke |
| | 154.11 | Embedded in core or pole |
| | 154.12 | Cylindrical sleeve holder |
| | 154.13 | Holder with pocket for magnet |
| | 154.14 | Spring clip |
| | 154.16 | Axially pressing on magnets |
| | 154.17 | Wedging between |
| | 154.21 | Permanent magnet characterized by the shape of the magnet |
| | 154.22 | With specific dimension |
| | 154.23 | Horseshoe |
| | 154.24 | Bar, square or rectangular |
| | 154.25 | Disk, ring, or cylinder |
| | 154.26 | With means to prevent or reduce demagnetization (i.e., auxiliary magnetic poles) |
| | 154.28 | Specific magnetization |
| | 154.31 | Single pole pair |
| | 154.32 | Permanent magnet extends along an axis |
| | 154.33 | Plural rotors |
| | 154.34 | With adjustable magnetic structure |
| | 154.35 | With specific pole pieces or pole shoes |
| | 154.36 |  Circumferentially spaced poles and magnets |
| | 154.37 | Poles extending axially from magnets |
| | 154.38 | Pole shoe shape |
| | 154.39 | Different size |
| | 154.41 | Laminated |
| | 154.42 | Induced flux return pole |
| | 154.43 | Additional permanent magnets |
| | 154.44 | Additional shield or coating (non-magnetic) |
| | 154.45 | Multiple pole pairs |
| | 154.46 | With specific pole shoe pieces |
| | 154.47 | Magnet extending between two poles |
| | 154.48 | Induce flux return pole |
| | 154.49 | Adjustable |
| | 155 | Inductor type |
| | 156.01 | Permanent magnet rotor |
| | 156.02 | Transverse flux |
| | 156.03 | With a hysteresis ring |
| | 156.04 | Separate portion of the rotor magnet used as a thrust bearing |
| | 156.05 | Separate portion of the rotor magnet used as a magnet for sensing (i.e., for position or frequency) |
| | 156.06 | Combined with flux for sensing |
| | 156.07 | Additional flux directing magnets |
| | 156.08 | Mounting (such as on a surface of a shaft) |
| | 156.09 | Keyed to shaft |
| | 156.11 | Magnets in shaft |
| | 156.12 | Mounted on a sleeve/hub |
| | 156.13 | Keyed to a sleeve/hub |
| | 156.14 | Knurl between the sleeve/hub and a shaft |
| | 156.15 | Induced flux pole on sleeve/hub |
| | 156.16 | Spring mounted |
| | 156.18 | With a threaded fastener |
| | 156.19 | With a wedge |
| | 156.21 | With an adhesive |
| | 156.22 | With an axial end clamp |
| | 156.23 | With casting material around the magnet |
| | 156.24 | Including a spring mount to adjust a flux |
| | 156.25 | Axially offset and radially magnetized magnets |
| | 156.26 | Mounted on a bell shape hub |
| | 156.27 | Including thermal compensation |
| | 156.28 | Sleeve covering magnet face |
| | 156.29 | Sleeve parallel to magnetic face |
| | 156.31 | Banding around magnet |
| | 156.32 | Including an axial air gap |
| | 156.33 | With pole shoes |
| | 156.34 | With a stator between a rotating flux return plate and rotor magnet |
| | 156.35 | With single rotor magnet and plural stators |
| | 156.36 | With plural sets of rotating magnets |
| | 156.38 | Specific shape |
| | 156.48 | Pole shoes/pole pieces |
| | 156.49 | Radial flux path and radially positioned pole shoes |
| | 156.51 | Laminated pole shoes with multiple pole pairs |
| | 156.52 | Laminated pole shoes with single pole pair |
| | 156.53 | Embedded in a core |
| | 156.54 | Induced flux return poles |
| | 156.55 | Circumferential flux path and circumferential pole shoes |
| | 156.56 | Embedded |
| | 156.57 | With slots or holes to guide flux |
| | 156.58 | Different size pole shoes |
| | 156.59 | Pole shoes fixed to hub or shaft |
| | 156.61 | Pole shoes fixed with end plates |
| | 156.62 | Axially magnetized with poles shoes at one end |
| | 156.64 | Axially magnetized with pole shoes at both ends |
| | 156.66 | Claw poles/interfitting poles/lundel |
| | 156.67 | Laminated pole shoes |
| | 156.68 | Poles formed by magnet |
| | 156.69 | Plural sets of claw poles |
| | 156.71 | Claw poles extend in the same axial direction |
| | 156.72 | Additional support for magnet |
| | 156.73 | Additional support for claw pole tips |
| | 156.74 | Damping features |
| | 156.78 | Squirrel cage |
| | 157 | Vertically disposed |
| | 158 | Universal (A.C. or D.C.) |
| | 159 | A.C. |
| | 160 | Frequency converters |
| | 161 | Phase-shifter type |
| | 162 | Synchronous |
| | 166 | Induction |
| | 167 | With repulsion-starting |
| | 168 | Inductor-type generators (variable reluctance) |
| | 171 | Induction generators |
| | 172 | Shifting field (e.g., shading pole) |
| | 173 | Commutated |
| | 177 | D.C. |
| | 179 | Windings and core structure |
| | 180 | Field or excitation windings or structure |
| | 181 | Combined permanent and electromagnet |
| | 182 | With short-circuited winding or conductor |
| | 184 | Plural field windings |
| | 185 | Plural sets of poles |
| | 186 | Interpole, compensating or neutralizing poles |
| | 187 | Slotted or divided pole |
| | 188 | Differentially related |
| | 189 | Variable length or tapped winding |
| | 190 | Magnetic shunts for shifting field flux |
| | 191 | Adjustable magnetic structure |
| | 192 | Nonmagnetic inserts or air gaps |
| | 193 | Nonuniform core cross section |
| | 194 | Coil supports and spools |
| | 195 | Armature or primary |
| | 196 | Corona-prevention |
| | 197 | With short-circuited winding or conductor |
| | 198 | Plural windings |
| | 200 | Variable length or tapped windings |
| | 201 | Bar windings |
| | 202 | Open windings |
| | 203 | Closed windings |
| | 208 | Coils |
| | 209 | Adjustable magnetic structure |
| | 210 | Secondary windings or conductors |
| | 213 | Antiparasitic conductors (imbricated) |
| | 214 | Coil retainers or slot closers |
| | 215 | Slot liners |
| | 216.001 | Core |
| | 216.002 | Pole-less core (i.e., slotless, toothless) |
| | 216.003 | Wire core |
| | 216.004 | Laminated core |
| | 216.005 | Having winding lead accommodation structure |
| | 216.006 | Having particular grain orientation |
| | 216.007 | Plural laminated segments radially united |
| | 216.008 | Plural axially laminated segments circumferentially united |
| | 216.011 | Circumferentially offset laminations |
| | 216.012 | Offset pole teeth |
| | 216.013 | Having axially extended spirally-laminated core |
| | 216.014 | Offset cooling fins |
| | 216.015 | Plural diverse elements |
| | 216.021 | E-shaped |
| | 216.023 | C- or U-shaped core |
| | 216.024 | Plural cores unified by magnetic coupling between poles, with a winding around the middle bend of each core |
| | 216.026 | Two cores unified by magnetic coupling between poles, with a winding on each side leg of each core |
| | 216.027 | Two cores unified by structurally coupled poles, with a winding around the middle bend of each core |
| | 216.028 | Having centrally-supported arcuate pole and a winding around each end of pole |
| | 216.029 | Plural unified cores having a pole winding |
| | 216.032 | Two cores unified by a joint spring coupling between poles |
| | 216.033 | Having winding around middle bend of core |
| | 216.036 | Having winding around core side leg |
| | 216.038 | Core side legs extend along rotor axis |
| | 216.039 | Core middle bend extends along rotor axis |
| | 216.041 | Having axially extended spiral lamination |
| | 216.042 | Having machined poles |
| | 216.043 | Having bending notch |
| | 216.044 | Having inter-layer mating projection and recess |
| | 216.045 | Radially stacked |
| | 216.048 | Having interlamina mating structure on lamina face |
| | 216.049 | Having a lamination including a radially extending mounting projection (e.g., mounting ear) |
| | 216.053 | Having integral spider (e.g., spokes) |
| | 216.054 | Non-planar lamination (e.g., wavy) |
| | 216.055 | Having a particular outer peripheral shape |
| | 216.057 | Laminated pole |
| | 216.058 | Securing means |
| | 216.059 | Alternating laminations |
| | 216.061 | Circumferentially stacked |
| | 216.062 | Radially stacked |
| | 216.063 | Wound lamination |
| | 216.064 | Laminated pole tip (e.g., shoe) |
| | 216.065 | Adhesively bonded laminations |
| | 216.066 | Homogeneous core or yoke (e.g., solid core) |
| | 216.069 | Having slot of particular shape |
| | 216.074 | Pole structure |
| | 216.075 | Particular to switch reluctant machine |
| | 216.076 | Having integral flux shunt |
| | 216.078 | Pivotally mounted (e.g., hinged) |
| | 216.079 | Removable pole |
| | 216.081 | Having intermediate spacer |
| | 216.082 | Having wedge between pole and core |
| | 216.083 | Having threaded fastener (e.g., screw) |
| | 216.084 |  With mating female threaded fastener element (e.g., bolt) |
| | 216.085 | Fastened through pole flange |
| | 216.086 | Dovetail connection |
| | 216.089 | Crimped connection |
| | 216.091 | Pole tip (e.g., shoe) |
| | 216.092 | Defining non-uniform air gap |
| | 216.096 | Asymmetrically shaped |
| | 216.097 | Having a particular dimension |
| | 216.098 | Removable tip |
| | 216.099 | Magnetic inter-pole bridging structure |
| | 216.101 | Cylindrical bridging structure |
| | 216.103 | Bridge defines distinct pole tip common to two adjacent poles |
| | 216.104 | With nonmagnetic inter-pole tip support |
| | 216.106 | Having flux guide |
| | 216.108 | Having flux shield |
| | 216.109 | Spaced-segment core |
| | 216.111 | Core having a particular dimension |
| | 216.113 | Having a particular binding or supporting means |
| | 216.114 | End ring or plate |
| | 216.115 | Insulated |
| | 216.116 | Secured to shaft |
| | 216.118 | Secured to frame |
| | 216.119 | Having a cooling channel |
| | 216.121 | Secured to shaft |
| | 216.125 | Secured by wedge |
| | 216.126 | Fastened wedge |
| | 216.127 | Secured by threaded fastener (e.g., screw) |
| | 216.128 | Insulated fastener |
| | 216.129 | Secured by axially extending bar |
| | 216.131 | Secured by axially directed clamping means (e.g., spring clip) |
| | 216.132 | Positioned in core slot |
| | 216.133 | Positioned in axial through hole |
| | 216.134 | Integral with supporting element |
| | 216.135 | Secured by circumferential clip |
| | 216.136 | Secured by weld |
| | 216.137 | Secured by bonding agent |
| | 219 | Current collectors |
| | 220 | Spark-reduction |
| | 227 | With cooling |
| | 228 | With cleaning, lubricating, resurfacing or repairing |
| | 229 | Brush-traversing |
| | 230 | Circumferential brush shifting on reversal |
| | 231 | Rotary structure |
| | 238 | Fixed structure |
| | 400 | End shield |
| | 401 | Having legs for supporting a bearing (e.g., spokes) |
| | 402 | Having particular frame- or core-mating feature (e.g., keyed, projection/recess) |
| | 405 | Recessed into frame or core |
| | 406 | Cup-shaped end shield connected to another end shield |
| | 410 | Having frame between two end shields |
| | 411 | Particularly adapted to be secured to a core end ring |
| | 412 | Particularly adapted for use with impregnated core |
| | 413 | Having particular mounting fastener detail |
| | 416 | Having coil lead retainer |
| | 417 | Having ventilation hole |
| | 418 | Frame |
| | 419 | Adjustable |
| | 420 | Shaft mounted spider (e.g., spokes) |
| | 425 | Base with bearing support |
| | 426 | Leg-supported from base |
| | 427 | Supported by axial bar |
| | 428 | Axially split frame |
| | 431 | Having resilient core attachment means |
| | 432 | Having axial tie bar for attaching core |
| | 254.1 | Miscellaneous stator structure |
| | 255 | For railway-type machines |
| | 256 | Stray field flux loss prevention |
| | 257 | Interfitting or claw-tooth stators |
| | 260 | End turn supports |
| | 261.1 | Miscellaneous rotor structure |
| | 262 | High-speed rotor type |
| | 263 | Interfitting or claw tooth rotors |
| | 264 | Armatures |
| | 270 | End turn supports |
| | 271 | Banding |
| | 272 | Elements |
| | 273 | Miscellaneous |
| | 40MM | Miniature motors |
| CROSS-REFERENCE ART COLLECTIONS | ||
| | 800 | PIEZOELECTRIC POLYMERS (E.G., PVDF) |
| FOREIGN ART COLLECTIONS | ||
| FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
| Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collections listed below. These Collections contain ONLY foreign patents or non-patent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived. | ||
| FOR100 | PERMANENT MAGNET STATOR (310/154) |
| FOR101 | PERMANENT MAGNET ROTOR (310/156) |
| FOR102 | Linear (310/12) |
| DIGESTS | ||
| | DIG2 | HYSTERESIS ROTORS AND MOTORS |
| | DIG3 | HALL EFFECT GENERATORS AND CONVERTERS |
| | DIG6 | PRINTED-CIRCUIT MOTORS AND COMPONENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|
|
=online
business system 
=fees 
=forms
=help 
=laws/regulations 
=definition
(glossary)