|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 285 | PIPE JOINTS OR COUPLINGS |
Click here for a printable version of this file |
1 | SAFETY RELEASE |
3 | FRANGIBLE ELEMENT |
5 | IRRIGATION TYPE (GUIDE AND SUPPORT) |
7 | VACUUM CLEANER TYPE |
8 | FAUCET TYPE (E.G., SLIP-ON) |
9.1 | WITH MAGNETIC ELEMENT |
9.2 | CONTACT ONLY |
10 | LIQUID SEAL |
12 | CONVERTIBLE |
13 | WITH LEAKAGE OR DRIP DISPOSAL |
15 | REPAIR |
18 | WITH ASSEMBLY MEANS OR FEATURE |
19 | Spaced plates |
21.1 | Molded joint facilitator |
23 | With holding means functioning only during transportation assembly or disassembly |
24 | Guide and support |
27 | Guide |
30 | Combined inlet and outlet |
31 | Inserted section |
33 | Quick release |
36 | Attached thread-jamming preventer |
37 | With winder for packing or clamp |
38 | Handle or handwheel for rotary engagement |
39 | Particular tool-engaging means or with tool |
40 | Thread-cutting means |
41 | WITH HEATING OR COOLING |
42 | ROOF OR FLOOR DRAIN FLASHING TYPE |
45 | WITH CASING, LINING OR PROTECTOR |
56 | WATER CLOSET TYPE, FLOOR-SUPPORTED |
61 | WITH SUPPORT |
65 | IDENTICAL HALVES (E.G., TRAIN LINE TYPE) |
80 | WITH LOCK OR SEAL |
81 | WITH MEANS BLOCKING RELEASE OF HOLDING MEANS |
82 | Auxiliary latch |
89 | Lock nut or washer |
90 | Set screw |
91 | Key or pin |
92 | Thread lock |
93 | WITH INDICATOR, ALARM OR INSPECTION MEANS |
94 | WITH LUBRICATION |
95 | WITH FLUID PRESSURE SEAL |
96 | With external pressure supply |
98 | Swivel with flange in socket |
99 | Coacting opposing duplicate |
100 | With expansible chamber means |
104 | With separate, encased pipe-gripping means |
106 | Independent supply passage |
107 | Expansible shank |
108 | Separate retainer or positioner |
109 | Expansible internal sleeve-type gasket |
110 | Flexible lip |
113 | Wedged gasket |
114 | WITH STRAIN RELIEF |
117 | WITH BROKEN PARTS RETAINER |
118 | KNUCKLE JOINT WITH ACTUATING MEANS |
119 | COMBINED |
120.1 | HAVING PLURAL INDEPENDENT PATHS |
121.1 | Allowing relative motion of pipes |
121.2 | Revolvable and telescoping |
121.3 | Revolvable |
121.4 | Having spring biasing for maintaining a leak-proof seal |
121.5 | Having specific bearing structure |
121.6 | Swiveling |
122.1 | And at least one path having branched flow |
123.1 | For concentric tubes or pipes (e.g., well casing or wellhead type) |
123.2 | Having plural parallel suspended inner tubes |
123.3 | Having single suspended inner tube |
123.4 | Split ring type suspension means |
123.5 | Having inner tube anchored by slip means |
123.6 | Including packing means |
123.7 | Having means engaging slip means and compressing packing means |
123.9 | Having radially applied orienting means |
123.11 | Having slip means actuator |
123.12 | Including a seal |
123.15 | Double-walled or duplex joint |
123.17 | Joint fabricated from material to compensate for movement |
124.1 | Parallel paths |
125.1 | FOR BRANCHED PATH |
126.1 | Having an access opening and removable cover |
127.1 | Including a swivel joint |
128.1 | Allowing for movement parallel to path (e.g., expansion joint) |
129.1 | And having additional, integral fitting, branch, or coupling for a means such as a vent |
130.1 | Intersecting paths (e.g., X- or cross-type) |
131.1 | Y-type, (symmetrical along the centerline) |
132.1 | (Y-type) having a straight portion and an angled leg |
133.11 | T-type |
134.1 | U-TYPE (E.G., RETURN BEND) |
136.1 | PIPE TO DISCREET NIPPLE OR SLEEVE TO PLATE (I.E., THREE SUCCESSIVE PIECES) |
137.11 | Pipe to nipple connection dependent on nipple to plate connection |
138.1 | Ball and socket |
139.1 | Plate clamped between flanged nipple and separate fastener |
140.1 | Expandable detent engages plate to hold nipple |
141.1 | Nipple sealed to plate |
142.1 | Nipple bolted to plate |
143.1 | Nipple threaded to plate |
144.1 | SERIAL,RELATIVELY MOVABLE PORTIONS |
145.1 | Having telescoping portion |
146.1 | Linked ball and socket portions |
147.1 | Plural swivels |
148.1 | Serial diverse single flow path or line |
148.3 | Flexible |
148.5 | Intermediate joint with expansible spigots |
148.6 | Compound coupling (e.g., leak-gland type) |
148.9 | Having bonded component |
148.11 | Diverse materials |
148.19 | Diverse coupling interfaces |
148.22 | Diverse size or shape |
148.28 | Having bolted or screwed flange or clamp |
148.2 | Quick connect or release |
148.4 | Having swivel |
149.1 | CONNECTOR FOR CONDUIT HOUSING ELECTROMAGNETIC LINE: |
150.1 | Underground |
151.1 | Water tight |
152.1 | Multiple passage |
153.1 | Including swivel |
154.1 | Having box and connector |
179 | ELBOW |
179.1 | With access opening |
180 | Cooperating saddle clamp |
181 | Serially connected, adjustable |
182 | Nesting parts |
183 | Sheet metal |
184 | ADJUSTABLE ANGLE |
187 | TEMPERATURE-RESPONSIVE |
188 | SIDE TO PIPE SIDE |
189 | END TO SIDE OR PLATE (E.G., REINFORCEMENT) |
190 | Swivel with lateral port to annular sleeve |
191 | Bolt or hook in flow (e.g., center bolt) |
192 | Penetrating (e.g., secant) |
196 | Expansible packing on spigot |
197 | Saddle-type clamp |
200 | Flexible or yielding plate |
201 | Sput |
211 | Countersunk packed |
213 | Gland |
219 | Screw |
222 | Expanded or swaged pipe |
222.1 | FOR PLURAL COMPONENT LINE (E.G., FLEXIBLE TYPE) |
222.2 | Metal, elastomeric (e.g., rubber), and fabric layers |
222.3 | Elastomeric and fabric layers |
222.4 | Metal and elastomeric layers |
222.5 | Distinct metal layers (e.g., wire cloth, etc.) |
223 | FLEXIBLE JOINT, RIGID MEMBERS |
224 | Radial and longitudinal expansion compensators |
225 | Diaphragm |
226 | Bellows |
230 | Concrete, clay, or masonry pipe |
231 | Socketed packing type |
235 | Resilient sleeve type |
238 | NONMETAL TO METAL |
239 | Internal member (e.g., sleeve or nipple) |
260 | BOTH MEMBERS PLIABLE AND NONMETAL |
261 | BALL AND SOCKET |
262 | With internal tie means |
263 | Radially spaced spherical surfaces |
264 | Oscillative |
266 | Composite ball |
267 | Spring-biased packing |
268 | Spring-biased ball |
270 | With separate packing actuator |
271 | With removable ball seat |
272 | SWIVEL |
272.1 | With access opening |
273 | Transverse cylinder in socket |
274 | With yoke |
275 | Pipe in socket type |
282 | With rotation limits |
283 | DETACHABLE HINGE |
284.1 | WITH ACCESS OPENING |
285.1 | MOLDED JOINT |
286.1 | Interlocked |
287.1 | With root repellent |
288.1 | Weld |
288.2 | Axially spaced |
288.3 | Cold weld |
288.4 | Flash weld |
288.5 | Having additional holding means |
288.7 | Having disassembly feature |
288.8 | Having crack arresting feature |
288.9 | Reinforced |
288.11 | Having pre-formed weld ring |
289.1 | Solder |
289.2 | Having additional holding means |
289.4 | Having disassembly feature |
289.5 | Having pre-placed solder |
290.1 | Composite pipe (ends) |
291.1 | Having screw interlock |
292.1 | With lug and slot interlock |
293.1 | Lining or cover molded to pipe end |
294.1 | Sleeve |
295.1 | With packing filler |
296.1 | Sprue |
298 | VARIABLE LENGTH |
304 | FRICTION DETENT (E.G., BREAKAWAY TYPE) |
305 | ESSENTIAL CATCH |
306 | Line pressure-responsive |
307 | Operated by conduit motion |
308 | With manipulator |
309 | With means to increase contact pressure (e.g., tightener) |
313 | Restrainer for manipulator |
314 | Cam sleeve |
317 | Spring-biased catch |
318 | Coil spring |
319 | Leaf spring |
320 | Pivoted |
321 | Resilient ring |
322 | MOVABLE JAW (E.G., CONTRACTIBLE SOCKET) |
325 | SIDE SLIDE |
328 | PARTICULAR INTERFACE |
335 | PACKED |
336 | With cooperating opposed packing grooves |
337 | Externally with clamp |
338 | Radially expansible, spigot-carried |
339 | Wedge |
344 | "Rolled-in" gasket |
345 | Frictional retention upon insertion |
347 | Carried on cylindrical shank |
348 | With separable follower |
349 | Supplemental packing socket |
351 | Plural seals |
353 | Screw thimble-gland |
354 | Screw thimble |
355 | Screw |
356 | Gland |
358 | Cam |
363 | Flanged pipe |
369 | Sleeve |
374 | Socket |
378 | Diverse metal seat |
379 | Gasket retainer |
381.1 | TEMPERATURE RESPONSIVE JOINT ELEMENT; E.G., SHRUNK FIT |
382 | DEFORMED |
383 | DISTINCT SPACED SERIAL |
384 | SCREW THIMBLE-GLAND |
386 | SCREW THIMBLE |
390 | SCREW |
394 | CAM |
397 | INTERNAL SLEEVE |
399 | SOCKET |
405 | FLANGE |
417 | SLEEVE |
420 | CLAMP |
422 | MATERIALS |
425 | MISCELLANEOUS |
CROSS-REFERENCE ART COLLECTIONS | ||
900 | BALANCED PRESSURE |
901 | CAP CLOSURES |
902 | CANTED RING |
903 | CORRUGATED |
904 | CRYOGENIC |
905 | DIFFERENT COEFFICIENTS OF EXPANSION |
906 | EQUIVALENTS |
907 | ELECTRICAL FIXTURES |
908 | EXTRUSION HOLES |
909 | FLUOROCARBONS AND MEMORY PLASTICS |
910 | GASKETS |
911 | GLASS |
912 | GEAR |
913 | INTERDIGITATING |
914 | IRREVERSIBLE |
915 | MASTIC |
916 | MOLECULAR CHANGE |
917 | METALLIC SEALS |
918 | O-RING |
919 | RESINOUS |
920 | REMOTELY CONTROLLED |
921 | SNAP-FIT |
922 | SAFETY AND QUICK RELEASE FOR DRILL PIPES |
923 | SPECIFIC MATERIAL |
924 | VENTED |
925 | SWELLS WHEN WET |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collections listed below. These Collections contain ONLY foreign patents or non-patent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived. | ||
FOR100 | SYSTEMS (285/120) |
FOR101 | With access opening (285/121) |
FOR108 | Pipe or cable and box (285/128) |
FOR110 | Receptacle inlet and outlet in unitary mounting (285/130) |
FOR111 | Plural noncommunicating paths (285/131) |
FOR112 | With branched flow (285/132) |
FOR113 | Concentric (285/133.1) |
FOR114 | Having suspension means (e.g., oil well head type, etc.) (285/133.2) |
FOR115 | With relative motion (e.g., drier drum type) (285/134) |
FOR117 | With relative motion (285/136) |
FOR118 | Parallel (285/137.1) |
FOR120 | Inner to spaced outer tube coupling (285/138) |
FOR121 | Radially compressed packing (285/139) |
FOR122 | Suspended (e.g., oil well casing type) (285/140) |
FOR131 | Plural layer pipe (285/149) |
FOR132 | Branched (285/150) |
FOR133 | With relative motion (285/151) |
FOR135 | With vent (285/153) |
FOR137 | Y-type (285/155) |
FOR138 | T-type (285/156) |
FOR139 | U-type (285/157) |
FOR140 | Pipe or rod-to-pipe-to-plate (285/158) |
FOR141 | Dependent coupling (285/159) |
FOR142 | Ball and socket (285/160) |
FOR143 | Plate clamped between internal nut and shoulder or flange (285/161) |
FOR144 | Expanding spigot engages plate (285/162) |
FOR145 | Serial relatively movable joints (285/163) |
FOR151 | Serial diverse single flow or line (285/169) |
FOR161 | MOLDED JOINT (285/284) |
FOR162 | With root repellent (285/285) |
FOR163 | Weld (285/286) |
FOR164 | Solder (285/287) |
FOR165 | Composite pipe (ends) (285/288) |
FOR166 | With screw interlock (285/289) |
FOR167 | With lug and slot interlock (285/290) |
FOR168 | Lining molded to pipe end (285/291) |
FOR169 | Sleeve (285/292) |
FOR172 | With packing filler (285/295) |
FOR174 | Sprue (285/297) |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|