This page requires javascipt to function properly
2 . (1 indent ) With frangible or deformable element
4 . (1 indent ) Score line or groove
5 IRRIGATION TYPE (GUIDE AND SUPPORT)
6 . (1 indent ) Released by conduit motion
8 FAUCET TYPE (E.G., SLIP-ON)
9.1 WITH MAGNETIC ELEMENT
11 . (1 indent ) With relative motion
13 WITH LEAKAGE OR DRIP DISPOSAL
14 . (1 indent ) Weep holes
16 . (1 indent ) Removable wear element
17 .. (2 indent ) Alternate wear parts
18 WITH ASSEMBLY MEANS OR FEATURE
19 . (1 indent ) Spaced plates
20 .. (2 indent ) Penetrating
21.1 . (1 indent ) Molded joint facilitator
21.2 .. (2 indent ) Having embedded facilitator
21.3 .. (2 indent ) Having solvent facilitator
22 .. (2 indent ) Spacing means (e.g., lugs)
23 . (1 indent ) With holding means functioning only during transportation assembly or disassembly
24 . (1 indent ) Guide and support
25 .. (2 indent ) Plural noncommunicating (e.g., train pipe type)
26 ... (3 indent ) With latch or lock
28 .. (2 indent ) Plural noncommunicating
29 ... (3 indent ) With latch or lock
30 . (1 indent ) Combined inlet and outlet
31 . (1 indent ) Inserted section
32 .. (2 indent ) Threaded telescopic
33 . (1 indent ) Quick release
34 .. (2 indent ) Radially moved segmented threads (e.g., chuck type)
35 ... (3 indent ) Pivoted segments
36 . (1 indent ) Attached thread-jamming preventer
37 . (1 indent ) With winder for packing or clamp
38 . (1 indent ) Handle or handwheel for rotary engagement
39 . (1 indent ) Particular tool-engaging means or with tool
40 . (1 indent ) Thread-cutting means
41 WITH HEATING OR COOLING
42 ROOF OR FLOOR DRAIN FLASHING TYPE
44 .. (2 indent ) Adjustable pitch
45 WITH CASING, LINING OR PROTECTOR
46 . (1 indent ) Escutcheon type
47 . (1 indent ) Insulated
48 .. (2 indent ) Between serially connected parts
49 ... (3 indent ) Intermediate resilient conduit (noise-dampener)
50 ... (3 indent ) By intermediate joint
51 .... (4 indent ) Ball and socket
52 .... (4 indent ) Screw thimble
53 ... (3 indent ) Sleeve
54 ... (3 indent ) Socket
56 WATER CLOSET TYPE, FLOOR-SUPPORTED
57 . (1 indent ) Flexible diaphragm or bellows
58 . (1 indent ) Intermediate coupling
59 .. (2 indent ) Tapered spigot
60 . (1 indent ) Tapered spigot
63 .. (2 indent ) Railway
64 . (1 indent ) Static building construction
65 IDENTICAL HALVES (E.G., TRAIN LINE TYPE)
66 . (1 indent ) With intermediate sleeve
67 . (1 indent ) Side slide
68 . (1 indent ) Transverse port
69 .. (2 indent ) Auxiliary detent
70 . (1 indent ) Longitudinal port
71 .. (2 indent ) Pivoted hook or loop
72 ... (3 indent ) Auxiliary detent
73 .. (2 indent ) Integral hook
74 ... (3 indent ) Oscillating engagement
75 .... (4 indent ) Reciprocating conduit
76 .... (4 indent ) Auxiliary detent
77 .... • (5 indent ) Reciprocating
78 .... • . (6 indent ) Key or wedge
79 ... (3 indent ) Auxiliary detent
81 WITH MEANS BLOCKING RELEASE OF HOLDING MEANS
82 . (1 indent ) Auxiliary latch
83 .. (2 indent ) Line pressure-responsive
84 .. (2 indent ) Reciprocating
85 ... (3 indent ) With manipulator
86 ... (3 indent ) Locking sleeve
87 .. (2 indent ) Pivoted
88 ... (3 indent ) With manipulator
89 . (1 indent ) Lock nut or washer
90 . (1 indent ) Set screw
91 . (1 indent ) Key or pin
92 . (1 indent ) Thread lock
93 WITH INDICATOR, ALARM OR INSPECTION MEANS
95 WITH FLUID PRESSURE SEAL
96 . (1 indent ) With external pressure supply
97 .. (2 indent ) Inflated member
98 . (1 indent ) Swivel with flange in socket
99 . (1 indent ) Coacting opposing duplicate
100 . (1 indent ) With expansible chamber means
101 .. (2 indent ) Piston-type reactor
102 ... (3 indent ) With line pressure-responsive catch
103 ... (3 indent ) Side slide
104 . (1 indent ) With separate, encased pipe-gripping means
105 .. (2 indent ) Packing-actuated
106 . (1 indent ) Independent supply passage
107 . (1 indent ) Expansible shank
108 . (1 indent ) Separate retainer or positioner
109 . (1 indent ) Expansible internal sleeve-type gasket
110 . (1 indent ) Flexible lip
111 .. (2 indent ) C-shaped section
112 ... (3 indent ) Longitudinal web
113 . (1 indent ) Wedged gasket
115 . (1 indent ) Extension of socket or sleeve
116 .. (2 indent ) Separable
117 WITH BROKEN PARTS RETAINER
118 KNUCKLE JOINT WITH ACTUATING MEANS
120.1 HAVING PLURAL INDEPENDENT PATHS
121.1 . (1 indent ) Allowing relative motion of pipes
121.2 .. (2 indent ) Revolvable and telescoping
121.3 .. (2 indent ) Revolvable
121.4 ... (3 indent ) Having spring biasing for maintaining a leak-proof seal
121.5 ... (3 indent ) Having specific bearing structure
121.6 .. (2 indent ) Swiveling
121.7 ... (3 indent ) Ball and socket type
122.1 . (1 indent ) And at least one path having branched flow
123.1 . (1 indent ) For concentric tubes or pipes (e.g., well casing or wellhead type)
123.2 .. (2 indent ) Having plural parallel suspended inner tubes
123.3 .. (2 indent ) Having single suspended inner tube
123.4 ... (3 indent ) Split ring type suspension means
123.5 ... (3 indent ) Having inner tube anchored by slip means
123.6 .... (4 indent ) Including packing means
123.7 .... • (5 indent ) Having means engaging slip means and compressing packing means
123.8 .... • . (6 indent ) By bolt directly connecting slip means to packing means
123.9 .... • (5 indent ) Having radially applied orienting means
123.11 .... (4 indent ) Having slip means actuator
123.12 ... (3 indent ) Including a seal
123.13 .... (4 indent ) Held by a means applied radially (e.g., set crew)
123.14 .... (4 indent ) Compressed by tightening a bolt coaxial to tubing
123.15 .. (2 indent ) Double-walled or duplex joint
123.16 ... (3 indent ) Wall configured as mating complementary type (e.g., hot air ducts)
123.17 .. (2 indent ) Joint fabricated from material to compensate for movement
124.1 . (1 indent ) Parallel paths
124.2 .. (2 indent ) Having spacer means for pipes or tubes
124.3 ... (3 indent ) Apertured plate type
124.4 ... (3 indent ) Including a fitting, boss, or nipple means
124.5 .. (2 indent ) Located within block type connector for ducts
126.1 . (1 indent ) Having an access opening and removable cover
127.1 . (1 indent ) Including a swivel joint
127.2 .. (2 indent ) Double Y-type
128.1 . (1 indent ) Allowing for movement parallel to path (e.g., expansion joint)
129.1 . (1 indent ) And having additional, integral fitting, branch, or coupling for a means such as a vent
129.2 .. (2 indent ) Plus a bend, flange, pocket, or chamber for antisiphon
130.1 . (1 indent ) Intersecting paths (e.g., X- or cross-type)
131.1 . (1 indent ) Y-type, (symmetrical along the centerline)
132.1 . (1 indent ) (Y-type) having a straight portion and an angled leg
133.21 .. (2 indent ) Having a seal, gasket, O-ring, or packing
133.3 .. (2 indent ) Having a pipe-receiving bell, socket or mouth
133.4 .. (2 indent ) Having threaded portions
133.5 .. (2 indent ) Having reinforcement
133.6 .. (2 indent ) For thin-walled material (e.g., sheet-metal)
134.1 U-TYPE (E.G., RETURN BEND)
135.1 . (1 indent ) Detachable
135.2 .. (2 indent ) Having yoke-type clamp
135.3 ... (3 indent ) Having a removable bushing
135.4 .. (2 indent ) Having coupling sleeve
135.5 ... (3 indent ) Secured by bolt
136.1 PIPE TO DISCREET NIPPLE OR SLEEVE TO PLATE (I.E., THREE SUCCESSIVE PIECES)
137.11 . (1 indent ) Pipe to nipple connection dependent on nipple to plate connection
138.1 . (1 indent ) Ball and socket
139.1 . (1 indent ) Plate clamped between flanged nipple and separate fastener
139.2 .. (2 indent ) Nipple includes seal
139.3 .. (2 indent ) Nipple includes securing means
140.1 . (1 indent ) Expandable detent engages plate to hold nipple
141.1 . (1 indent ) Nipple sealed to plate
142.1 . (1 indent ) Nipple bolted to plate
143.1 . (1 indent ) Nipple threaded to plate
144.1 SERIAL,RELATIVELY MOVABLE PORTIONS
145.1 . (1 indent ) Having telescoping portion
145.2 .. (2 indent ) Pivot or swivel
145.3 .. (2 indent ) Ball connector
145.4 .. (2 indent ) Sleeve
145.5 ... (3 indent ) Bellows-type
146.1 . (1 indent ) Linked ball and socket portions
146.2 .. (2 indent ) Having multiplex socket
146.3 .. (2 indent ) Having ball between opposed sockets
147.1 . (1 indent ) Plural swivels
147.2 .. (2 indent ) Having spring
147.3 .. (2 indent ) Having nozzle
148.1 . (1 indent ) Serial diverse single flow path or line
148.3 .. (2 indent ) Flexible
148.5 .. (2 indent ) Intermediate joint with expansible spigots
148.6 .. (2 indent ) Compound coupling (e.g., leak-gland type)
148.7 ... (3 indent ) Having molded or bonded joint
148.8 .... (4 indent ) Having bolted or screwed flange or clamp
148.9 .. (2 indent ) Having bonded component
148.11 .. (2 indent ) Diverse materials
148.12 ... (3 indent ) Having bonded component
148.13 ... (3 indent ) Nonmetal to metal
148.14 .... (4 indent ) Quick connect or release
148.15 .... (4 indent ) Having swivel
148.16 .... (4 indent ) Having serrated nipple
148.17 .... (4 indent ) Having clamp
148.18 .... (4 indent ) Reducer
148.19 .. (2 indent ) Diverse coupling interfaces
148.21 ... (3 indent ) Quick connect or release
148.22 .. (2 indent ) Diverse size or shape
148.23 ... (3 indent ) Reducer
148.24 .... (4 indent ) Sheet-metal (e.g., stove duct, etc.)
148.25 .... (4 indent ) Having bolted flange
148.26 .... (4 indent ) Having clamp
148.27 ... (3 indent ) Eccentric
148.28 .. (2 indent ) Having bolted or screwed flange or clamp
148.2 .. (2 indent ) Quick connect or release
148.4 .. (2 indent ) Having swivel
149.1 CONNECTOR FOR CONDUIT HOUSING ELECTROMAGNETIC LINE:
150.1 . (1 indent ) Underground
151.1 . (1 indent ) Water tight
152.1 . (1 indent ) Multiple passage
153.1 . (1 indent ) Including swivel
153.2 .. (2 indent ) Having plural swivels
153.3 .. (2 indent ) Having swivel and spring
154.1 . (1 indent ) Having box and connector
154.2 .. (2 indent ) Including flexible armored sheath
154.3 ... (3 indent ) Including screw operated clamp
154.4 .. (2 indent ) Including screw operated clamp
179.1 . (1 indent ) With access opening
179.2 .. (2 indent ) Sheet-metal
180 . (1 indent ) Cooperating saddle clamp
181 . (1 indent ) Serially connected, adjustable
182 . (1 indent ) Nesting parts
183 . (1 indent ) Sheet metal
185 . (1 indent ) With center bolt
187 TEMPERATURE-RESPONSIVE
189 END TO SIDE OR PLATE (E.G., REINFORCEMENT)
190 . (1 indent ) Swivel with lateral port to annular sleeve
191 . (1 indent ) Bolt or hook in flow (e.g., center bolt)
192 . (1 indent ) Penetrating (e.g., secant)
193 .. (2 indent ) Fixture
194 .. (2 indent ) Hole edge clamp
195 ... (3 indent ) Transverse screw
196 . (1 indent ) Expansible packing on spigot
197 . (1 indent ) Saddle-type clamp
198 .. (2 indent ) Yoke with radial screw at bight
199 .. (2 indent ) Yoke with thread on free ends
200 . (1 indent ) Flexible or yielding plate
202 .. (2 indent ) Interlocked
203 ... (3 indent ) Plate edge locks sput
204 ... (3 indent ) Packed
205 .. (2 indent ) Clamped plate
206 ... (3 indent ) Screw clamp
207 .... (4 indent ) With conduit clamping means
208 .... (4 indent ) Attachable from one side of plate
209 .... • (5 indent ) Lugged nipple
210 .... • . (6 indent ) Movable lug
211 . (1 indent ) Countersunk packed
212 .. (2 indent ) Screw-compressed
214 .. (2 indent ) Internal with expanding means
215 .. (2 indent ) External of conduit
216 ... (3 indent ) Expansible
217 .... (4 indent ) With conduit clamping means
218 .... • (5 indent ) Transverse screw
220 .. (2 indent ) With packing
221 .. (2 indent ) Necked plate
222 . (1 indent ) Expanded or swaged pipe
222.1 FOR PLURAL COMPONENT LINE (E.G., FLEXIBLE TYPE)
222.2 . (1 indent ) Metal, elastomeric (e.g., rubber), and fabric layers
222.3 . (1 indent ) Elastomeric and fabric layers
222.4 . (1 indent ) Metal and elastomeric layers
222.5 . (1 indent ) Distinct metal layers (e.g., wire cloth, etc.)
223 FLEXIBLE JOINT, RIGID MEMBERS
224 . (1 indent ) Radial and longitudinal expansion compensators
225 . (1 indent ) Diaphragm
226 . (1 indent ) Bellows
227 .. (2 indent ) Multiple
228 ... (3 indent ) Balanced
229 .. (2 indent ) Single fold type
230 . (1 indent ) Concrete, clay, or masonry pipe
231 . (1 indent ) Socketed packing type
232 .. (2 indent ) With conduit gripping means (e.g., wedge ring)
233 .. (2 indent ) Beaded conduit
234 .. (2 indent ) Flared conduit
235 . (1 indent ) Resilient sleeve type
236 .. (2 indent ) Clamped
237 .. (2 indent ) With spigot and socket ends
239 . (1 indent ) Internal member (e.g., sleeve or nipple)
240 .. (2 indent ) Flexible tip pipe
241 ... (3 indent ) External clamp
242 .. (2 indent ) External clamp or holder
243 ... (3 indent ) Movable jaw
244 ... (3 indent ) Spring
245 ... (3 indent ) Screw-compressed
246 .... (4 indent ) Thimble gland
247 .... (4 indent ) Thimble
248 .... • (5 indent ) Separable means between hose and clamp
249 .... • . (6 indent ) Wedge ring
250 .... (4 indent ) Gland
251 .... (4 indent ) Screw-fed hose
252 ... (3 indent ) Band clamp with tightener
253 .... (4 indent ) Bolted
254 ... (3 indent ) Wrapped band
255 ... (3 indent ) Wedge
256 ... (3 indent ) Deformation
257 .... (4 indent ) Bendable spur fingers
258 .... (4 indent ) Expanding internal member
259 ... (3 indent ) Particular surface
260 BOTH MEMBERS PLIABLE AND NONMETAL
262 . (1 indent ) With internal tie means
263 . (1 indent ) Radially spaced spherical surfaces
264 . (1 indent ) Oscillative
265 .. (2 indent ) With gimbal ring
266 . (1 indent ) Composite ball
267 . (1 indent ) Spring-biased packing
268 . (1 indent ) Spring-biased ball
269 .. (2 indent ) Socketed spring
270 . (1 indent ) With separate packing actuator
271 . (1 indent ) With removable ball seat
272.1 . (1 indent ) With access opening
273 . (1 indent ) Transverse cylinder in socket
274 . (1 indent ) With yoke
275 . (1 indent ) Pipe in socket type
276 .. (2 indent ) With ball, ring or pin detent
277 ... (3 indent ) With manipulator
278 .. (2 indent ) With flange in socket
279 ... (3 indent ) Spring-pressed flange
280 ... (3 indent ) Flange locked axially
281 .... (4 indent ) Packed
282 . (1 indent ) With rotation limits
284.1 WITH ACCESS OPENING
286.1 . (1 indent ) Interlocked
286.2 .. (2 indent ) Deformed or having additional holding means
287.1 . (1 indent ) With root repellent
288.2 .. (2 indent ) Axially spaced
288.3 .. (2 indent ) Cold weld
288.4 .. (2 indent ) Flash weld
288.5 .. (2 indent ) Having additional holding means
288.6 ... (3 indent ) Interlocked
288.7 .. (2 indent ) Having disassembly feature
288.8 .. (2 indent ) Having crack arresting feature
288.9 .. (2 indent ) Reinforced
288.11 .. (2 indent ) Having pre-formed weld ring
289.1 . (1 indent ) Solder
289.2 .. (2 indent ) Having additional holding means
289.3 ... (3 indent ) Interlocked
289.4 .. (2 indent ) Having disassembly feature
289.5 .. (2 indent ) Having pre-placed solder
290.1 . (1 indent ) Composite pipe (ends)
290.2 .. (2 indent ) Locked reinforcement
290.3 .. (2 indent ) Interlocked with pipe end
290.4 ... (3 indent ) Having additional holding means
290.5 .. (2 indent ) Expansion/contraction
291.1 . (1 indent ) Having screw interlock
291.2 .. (2 indent ) Having interrupted thread
292.1 . (1 indent ) With lug and slot interlock
293.1 . (1 indent ) Lining or cover molded to pipe end
294.1 . (1 indent ) Sleeve
294.2 .. (2 indent ) Wrapped
294.3 .. (2 indent ) Sprue
294.4 ... (3 indent ) Having additional holding means
295.1 . (1 indent ) With packing filler
295.2 .. (2 indent ) Wedge ring type
295.3 .. (2 indent ) Elastomeric
296.1 . (1 indent ) Sprue
299 . (1 indent ) With bellows seal
300 .. (2 indent ) Internal sleeve
301 .. (2 indent ) With limit means
302 . (1 indent ) Telescopic with relative motion
303 . (1 indent ) Step adjustment
304 FRICTION DETENT (E.G., BREAKAWAY TYPE)
306 . (1 indent ) Line pressure-responsive
307 . (1 indent ) Operated by conduit motion
308 . (1 indent ) With manipulator
309 .. (2 indent ) With means to increase contact pressure (e.g., tightener)
310 ... (3 indent ) Separate actuator
311 ... (3 indent ) Dead center lever systems (self-locking)
312 ... (3 indent ) Cam lever
313 .. (2 indent ) Restrainer for manipulator
314 .. (2 indent ) Cam sleeve
315 ... (3 indent ) Reciprocating sleeve
316 .... (4 indent ) Spring-biased sleeve
317 .. (2 indent ) Spring-biased catch
318 . (1 indent ) Coil spring
319 . (1 indent ) Leaf spring
320 . (1 indent ) Pivoted
321 . (1 indent ) Resilient ring
322 MOVABLE JAW (E.G., CONTRACTIBLE SOCKET)
323 . (1 indent ) Wedge bushing
324 . (1 indent ) Reducing bushing
326 . (1 indent ) Clamping lever
327 . (1 indent ) Screw-thimble tightener
329 . (1 indent ) Diverse metal
330 . (1 indent ) Interlocked or overlapped
331 . (1 indent ) Annular socket
332 . (1 indent ) Tapered
332.1 .. (2 indent ) Conoidal
332.2 .. (2 indent ) Packed
332.3 ... (3 indent ) Interface
332.4 .. (2 indent ) Discontinuous interface surface
333 ... (3 indent ) Threaded (e.g., drill pipe type)
334 .... (4 indent ) Flat crest
334.1 .. (2 indent ) Adapter seat
334.2 ... (3 indent ) Double-tapered internal sleeve
334.3 ... (3 indent ) Elastomeric
334.4 .. (2 indent ) Dissimilar
334.5 .. (2 indent ) Flared
336 . (1 indent ) With cooperating opposed packing grooves
337 . (1 indent ) Externally with clamp
338 . (1 indent ) Radially expansible, spigot-carried
340 .. (2 indent ) Toggle ring type
341 .. (2 indent ) Double wedge surfaces
342 .. (2 indent ) Pushed
343 .. (2 indent ) Compressed
344 . (1 indent ) "Rolled-in" gasket
345 . (1 indent ) Frictional retention upon insertion
346 .. (2 indent ) With packing-expanding means
347 . (1 indent ) Carried on cylindrical shank
348 . (1 indent ) With separable follower
349 . (1 indent ) Supplemental packing socket
350 .. (2 indent ) Extrusion recess
351 . (1 indent ) Plural seals
352 .. (2 indent ) Coacting opposed duplicates
353 . (1 indent ) Screw thimble-gland
354 . (1 indent ) Screw thimble
357 .. (2 indent ) Threaded
359 .. (2 indent ) Thimble
360 .. (2 indent ) Lugged pipe, rotary engagement
361 ... (3 indent ) Bayonet slot
362 ... (3 indent ) With manipulating ring
363 . (1 indent ) Flanged pipe
364 .. (2 indent ) Clamped
365 ... (3 indent ) Band type
366 .... (4 indent ) Screw
367 .... • (5 indent ) Tangential
368 ... (3 indent ) Axially bolted
370 .. (2 indent ) Internal
371 ... (3 indent ) With external
372 .. (2 indent ) Dependent
373 ... (3 indent ) Longitudinally divided
375 .. (2 indent ) Internal reciprocating packer
376 .. (2 indent ) Lugged pipe, rotary engagement
377 ... (3 indent ) With manipulating ring
378 . (1 indent ) Diverse metal seat
379 . (1 indent ) Gasket retainer
380 .. (2 indent ) Resilient stud
381.1 TEMPERATURE RESPONSIVE JOINT ELEMENT; E.G., SHRUNK FIT
381.2 . (1 indent ) Memory metal element
381.3 .. (2 indent ) Having intermediate member
381.4 . (1 indent ) Memory plastic element
381.5 .. (2 indent ) Having intermediate member
382.1 . (1 indent ) Both members
382.2 .. (2 indent ) Simultaneous
382.4 . (1 indent ) Outwardly expanded
382.5 .. (2 indent ) Bulged
382.7 . (1 indent ) By separate deformable element
383 DISTINCT SPACED SERIAL
387 . (1 indent ) Removable
388 .. (2 indent ) Detachable flange
391 . (1 indent ) Interrupted thread
392 . (1 indent ) Attached thread bushing
395 . (1 indent ) Thimble
396 . (1 indent ) Bayonet type
398 . (1 indent ) With external
400 . (1 indent ) Detachable ring
401 . (1 indent ) Lugged pipe, rotary engagement
402 .. (2 indent ) Bayonet slot
403 . (1 indent ) With separable fastener
404 .. (2 indent ) Set screw or pin
406 . (1 indent ) Clamped
407 .. (2 indent ) Band type
408 ... (3 indent ) With intermediate flange engaging member
409 ... (3 indent ) Lever
410 ... (3 indent ) Screw
411 .... (4 indent ) Segmented ring
412 .. (2 indent ) Axially bolted
414 . (1 indent ) Detachable
415 .. (2 indent ) Split ring
418 . (1 indent ) Dependent
419 .. (2 indent ) Longitudinally divided
423 . (1 indent ) Nonmetallic
905 DIFFERENT COEFFICIENTS OF EXPANSION
909 FLUOROCARBONS AND MEMORY PLASTICS
922 SAFETY AND QUICK RELEASE FOR DRILL PIPES
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collections listed below. These Collections contain ONLY foreign patents or non-patent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived.
FOR101 . (1 indent ) With access opening (285/121)
FOR102 .. (2 indent ) Swivel (285/122)
FOR103 ... (3 indent ) With hollow center bolt (285/123)
FOR104 .. (2 indent ) Detachable return band (285/124)
FOR105 ... (3 indent ) With yoke clamp (285/125)
FOR106 .... (4 indent ) Removable bushing (285/126)
FOR107 .. (2 indent ) Elbow (285/127)
FOR108 . (1 indent ) Pipe or cable and box (285/128)
FOR109 .. (2 indent ) With attached closure flange (285/129)
FOR110 . (1 indent ) Receptacle inlet and outlet in unitary mounting (285/130)
FOR111 . (1 indent ) Plural noncommunicating paths (285/131)
FOR112 .. (2 indent ) With branched flow (285/132)
FOR113 .. (2 indent ) Concentric (285/133.1)
FOR114 ... (3 indent ) Having suspension means (e.g., oil well head type, etc.) (285/133.2)
FOR115 ... (3 indent ) With relative motion (e.g., drier drum type) (285/134)
FOR116 .... (4 indent ) Ball and socket (285/135)
FOR117 .. (2 indent ) With relative motion (285/136)
FOR118 .. (2 indent ) Parallel (285/137.1)
FOR119 ... (3 indent ) Having suspension means (e.g., oil well head type, etc.) (285/137.2)
FOR120 . (1 indent ) Inner to spaced outer tube coupling (285/138)
FOR121 .. (2 indent ) Radially compressed packing (285/139)
FOR122 .. (2 indent ) Suspended (e.g., oil well casing type) (285/140)
FOR123 ... (3 indent ) Radially movable support ring (split ring type) (285/141)
FOR124 ... (3 indent ) Inner tube coupling with integral support (285/142)
FOR125 .... (4 indent ) With intermediate member (285/143)
FOR126 ... (3 indent ) Slip anchored inner tube (285/144)
FOR127 .... (4 indent ) With slip actuator (285/145)
FOR128 .... (4 indent ) With unitary slip and packing assembly (285/146)
FOR129 .... (4 indent ) With slip-compressed packing (285/147)
FOR130 .... (4 indent ) With packing seat on slip (285/148)
FOR131 . (1 indent ) Plural layer pipe (285/149)
FOR132 . (1 indent ) Branched (285/150)
FOR133 .. (2 indent ) With relative motion (285/151)
FOR134 ... (3 indent ) Double Y-type (285/152)
FOR135 .. (2 indent ) With vent (285/153)
FOR136 ... (3 indent ) Antisiphon (285/154)
FOR137 .. (2 indent ) Y-type (285/155)
FOR138 .. (2 indent ) T-type (285/156)
FOR139 . (1 indent ) U-type (285/157)
FOR140 . (1 indent ) Pipe or rod-to-pipe-to-plate (285/158)
FOR141 .. (2 indent ) Dependent coupling (285/159)
FOR142 .. (2 indent ) Ball and socket (285/160)
FOR143 .. (2 indent ) Plate clamped between internal nut and shoulder or flange (285/161)
FOR144 .. (2 indent ) Expanding spigot engages plate (285/162)
FOR145 . (1 indent ) Serial relatively movable joints (285/163)
FOR146 .. (2 indent ) Diverse (285/164)
FOR147 ... (3 indent ) With telescopic type (285/165)
FOR148 .. (2 indent ) Plural ball and socket (285/166)
FOR149 ... (3 indent ) With sphere intermediate two sockets (285/167)
FOR150 .. (2 indent ) Plural swivel (285/168)
FOR151 . (1 indent ) Serial diverse single flow or line (285/169)
FOR152 .. (2 indent ) Intermediate joint with expansible spigots (285/170)
FOR153 .. (2 indent ) Compound (e.g., leak-gland type) (285/171)
FOR154 ... (3 indent ) With molded joint (285/172)
FOR155 .. (2 indent ) Diverse materials (285/173)
FOR156 ... (3 indent ) Nonmetal to metal (285/174)
FOR157 .. (2 indent ) Diverse coupling interfaces (285/175)
FOR158 .. (2 indent ) Diverse size or shape (285/176)
FOR159 ... (3 indent ) Reducer (285/177)
FOR160 ... (3 indent ) Eccentric (285/178)
FOR162 . (1 indent ) With root repellent (285/285)
FOR163 . (1 indent ) Weld (285/286)
FOR164 . (1 indent ) Solder (285/287)
FOR165 . (1 indent ) Composite pipe (ends) (285/288)
FOR166 . (1 indent ) With screw interlock (285/289)
FOR167 . (1 indent ) With lug and slot interlock (285/290)
FOR168 . (1 indent ) Lining molded to pipe end (285/291)
FOR169 . (1 indent ) Sleeve (285/292)
FOR170 .. (2 indent ) Wrapped (285/293)
FOR171 .. (2 indent ) Sprue (285/294)
FOR172 . (1 indent ) With packing filler (285/295)
FOR173 .. (2 indent ) Wedge ring type (285/296)
FOR174 . (1 indent ) Sprue (285/297)
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .