|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 279 | CHUCKS OR SOCKETS |
Click here for a printable version of this file |
2.01 | EXPANDING |
2.02 | Collet type |
2.05 | Jaws mounted on flexible member; i.e., diaphragm |
2.06 | Fluid-pressure actuator |
2.1 | Axially moving actuator |
2.11 | Wedge |
2.12 | Internal cone |
2.13 | With jaw positively interlocked with wedge; e.g., dovetail or T-slot |
2.14 | With resilient means contacting nonresilient jaw |
2.16 | Toggle |
2.17 | Axially compressible element expands radially |
2.18 | Lever |
2.19 | Rotary actuator |
2.21 | Jaw structure |
3 | VACUUM |
4.01 | WITH FLUID-PRESSURE ACTUATOR |
4.02 | With measuring, indicating or control means |
4.03 | Jaw is expansible chamber; i.e., bladder type |
4.04 | Pneumatic type |
4.05 | Jaws mounted on flexible member; i.e., diaphragm |
4.06 | Socket type |
4.1 | Radially reciprocating jaws |
5 | ANGULARLY ADJUSTABLE OR INDEXING |
6 | ECCENTRIC |
7 | THREADED GRIP |
8 | LONGITUDINAL SCREW CLAMP |
9.1 | SOCKET TYPE |
14 | Multiple alternative |
16 | Self-centering of floating |
19 | Lost motion |
19.1 | Swinging external yoke or detent |
19.3 | Rotary socket |
19.4 | Spreading elements |
19.5 | Key retainer |
19.6 | Sleeve type retainer |
20 | Fluid-conduit drill holding |
20.1 | Feed type |
Self-grasping |
32 | Conical clamp threaded in socket |
33 | Transversely oscillating jaws |
35 | Pivoted jaws |
Moving-cam actuator |
38 | Fixed cam and moving jaws |
Resilient split socket |
42 | Threaded cam sleeve |
43 | Reciprocating cam sleeve |
43.1 | Unitary |
43.7 | Nonresilient member biased by a resilient member |
43.8 | Resilient member reinforced by another resilient member |
43.9 | With means to exclude contaminants; e.g., seal, shield |
44 | One movable side |
46.1 | Spring biased jaws |
46.2 | Unitary |
46.3 | Split at one end only |
46.4 | Split at both ends |
46.5 | Split end to end |
46.6 | With jaw pads or insert |
46.7 | Nonresilient member biased by a resilient member |
46.8 | Resilient member reinforced by another resilient member |
46.9 | With means to exclude contaminants; e.g., seal, shield |
Moving-cam actuator |
51 | Fixed cam and moving jaws |
54 | Loose jaws |
55 | Loose jaws |
Moving-cam actuator |
58 | Fixed cam and moving jaws |
60 | Obliquely guided reciprocating jaws |
61 | Threaded sleeve and jaw |
63 | Threaded central cone and jaw |
64 | Threaded sleeve and body |
65 | Reciprocating jaw advancing sleeve |
66 | Radially reciprocating jaws |
67 | Transverse-screw actuated |
Moving-cam actuator |
76 | Side detent |
77 | Pivoted or rotary |
79 | Spring |
81 | Rotary cam sleeve |
82 | Reciprocating sleeve |
83 | Set screw |
84 | U-clamp |
85 | Plural bolt |
86 | Single transverse bolt |
87 | Longitudinal clamping wedge |
89 | Shouldered-tang holding |
93 | Tang offset within socket |
94 | Tang offset without socket |
95 | Bottomless |
97 | Transverse pin |
99 | Screw threaded |
102 | Friction grip |
104 | Barbed or pronged tang |
105 | Molded or cast-in tang |
105.1 | Adjustable length or size |
106 | PIVOTED JAW |
110 | RADIALLY RECIPROCATING JAWS |
111 | With indicator |
112 | Transverse-screw actuated |
114 | Spiral cam or scroll actuated |
117 | Rack-and-pinion actuated |
118 | Toggle actuated |
119 | Lever actuated |
121 | Wedge actuated |
122 | External-cone actuated |
123 | Jaws |
125 | WITH SAFETY FEATURE |
126 | WITH MEASURING, INDICATING OR CONTROL MEANS |
127 | DOUBLE ACTING |
128 | WITH MAGNETIC OR ELECTROSTATIC MEANS |
129 | BY CENTRIFUGAL FORCE |
132 | COMPENSATION FOR ECCENTRICITY |
133 | WITH CENTERING MEANS |
134 | SEPARATE CHUCK-ACTUATING POWER SOURCE |
136 | FOR GEAR OR SPLINE MOLDING |
137 | MORE THAN ONE SET OF GRIPPING MEANS |
138 | TORSION MANDREL |
139 | JAWS MOUNTED ON FLEXIBLE MEMBER; I.E., DIAPHRAGM |
140 | MEANS TO PREVENT JAW LOOSENING |
141 | MEMBER APPLIES AXIAL FORCE COMPONENT |
142 | ACCESSORY OR COMPONENT |
143 | Adapter |
146 | Sliding cam chuck actuator |
147 | Chuck key |
148 | Safety feature; e.g., ejector, interlock |
149 | Key holding or attaching means |
150 | Nonseparable or built-in |
151 | Padded or cushioned jaw |
152 | Jaw insert |
155 | Tool or workpiece ejector |
156 | Tool or work stop or locator |
157 | Protection means; e.g., cover, seal, overstress prevention, air blast |
158 | MISCELLANEOUS |
CROSS-REFERENCE ART COLLECTIONS | ||
900 | ADAPTED FOR AUTOMATIC TOOL CHANGER |
901 | CHUCK OR CHUCK JAW CHANGING MEANS |
902 | KEYLESS TYPE SOCKET |
903 | NEEDLE ROLLER TYPE SOCKET |
904 | QUICK CHANGE SOCKET |
906 | SELF GRASPING SOCKET |
907 | WASHER TYPE JAW OR ACTUATOR |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|