This page requires javascipt to function properly
1.1 BLOW-OUT PREVENTERS (I.E., COOPERATING SEGMENTS OF ANNULUS)
1.2 . (1 indent ) Deformable annulus
1.3 . (1 indent ) Radial reciprocating ram
3 PATTERN TRACER CONTROLLED ACTUATOR
5 . (1 indent ) Fluid pressure actuated
6 . (1 indent ) Roller tube contacting element
7 . (1 indent ) Perpendicularly reciprocating tube contacting element
8 .. (2 indent ) Screw actuated
9 . (1 indent ) Pivoting tube contacting element
10 .. (2 indent ) U-shaped resilient bar or rod
11 HEAT OR BUOYANCY MOTOR ACTUATED
12 FLUID ACTUATED OR RETARDED
14 . (1 indent ) Fluid and non-fluid actuators
15 . (1 indent ) Compulsory cut-off after flow period
16 .. (2 indent ) Serial main line cut-off and manual valves (e.g., hydraulic "fuses")
17 ... (3 indent ) Interconnected motion
18 .... (4 indent ) Manual and pilot valves
19 .. (2 indent ) Auxiliary pilot valve overrides a first pilot valve
20 .. (2 indent ) Forced return of actuator to cut-off position
21 .. (2 indent ) Actuator connection released on opening of cut-off valve
22 .. (2 indent ) Control fluid released into closed build-up chamber
23 .. (2 indent ) Dashpot interconnects actuator and valve
24 . (1 indent ) Venturi or line flow effect assisted
25 . (1 indent ) Pilot or servo type motor
26 .. (2 indent ) Alternative pressure sources or pilot valve
27 .. (2 indent ) Servo failure responsive control of main valve
28 .. (2 indent ) Fluid actuated pilot valve
29 ... (3 indent ) With additional pilot valve control
30.01 .. (2 indent ) Electrically actuated pilot valve
30.02 ... (3 indent ) Main valve biased closed by fluid pressure
30.03 .... (4 indent ) Venting passage within movable main valve
30.04 .... • (5 indent ) Pilot valve movably mounted within or around main valve
30.05 .... (4 indent ) Fluid pressure sole means for biasing valve closed
31 .. (2 indent ) Double or oppositely acting motor units
32 .. (2 indent ) Latched pilot valve
33 .. (2 indent ) Choked pressure type servo motor
34 ... (3 indent ) With reverse flow prevenging (nonsiphoning)
35 ... (3 indent ) Variable choke passage according to valve position
36 ... (3 indent ) With separate dashpot or choked fluid retarding chamber
37 ... (3 indent ) With choke or restrictor in main line
38 ... (3 indent ) Pilot valve seated in motor or valve element
39 .... (4 indent ) Controls inlet to choke chamber
40 .... (4 indent ) Tilting pilot valve
41 ... (3 indent ) Remote pilot valve actuation
42 ... (3 indent ) Adjustable opening limit for main valve
43 ... (3 indent ) Main valve biased open by line pressure
44 .... (4 indent ) Differential reaction surface for line pressure
45 .... • (5 indent ) Diaphragm or bellows surface
46 .... (4 indent ) Diaphragm or bellows motor element
47 .. (2 indent ) With separate dashpot or choked fluid retarder
48 . (1 indent ) Dashpot or fluid controlled retarder or timer
49 .. (2 indent ) Latch or trip releasing
50 .. (2 indent ) Line pressure connected dashpot or choke chamber
51 ... (3 indent ) With choke by-pass or relief means
52 ... (3 indent ) Chamber fills on closing of main valve
53 .. (2 indent ) Line connected open accumulating chamber
54 .. (2 indent ) Closed fluid circuit dashpot or choke chamber
55 .. (2 indent ) With choke by-pass or relief means
56 . (1 indent ) Plural operations (e.g., lifting and rotating rotary valve)
57 . (1 indent ) Fluid link or column actuator
58 . (1 indent ) With mechanical movement between actuator and valve
59 . (1 indent ) Rotary or oscillatory motor
60 . (1 indent ) With adjustable limit stop for actuator
61 . (1 indent ) Flexible wall expansible chamber reciprocating valve actuator
61.1 .. (2 indent ) Flexible wall valves fluid
61.2 .. (2 indent ) Coaxial actuator, seat and valve
61.3 ... (3 indent ) Valve between coaxial spring biasing means and actuator
61.4 ... (3 indent ) Coaxial spring biasing means between valve and actuator
61.5 ... (3 indent ) Actuator wall between valve and coaxial spring biasing means
62 . (1 indent ) Piston type expansible chamber reciprocating valve actuator
63 .. (2 indent ) Unitary piston and valve
63.4 .. (2 indent ) Lost motion, abutment or resilient connection between actuator and valve
63.5 .. (2 indent ) Coaxial actuator, seat and valve
63.6 ... (3 indent ) Coaxial spring biasing means between valve and actuator
64 WITH NON-FLUID RETARDER
65 PERMANENT OR CONSTANTLY ENERGIZED MAGNET ACTUATOR
67 . (1 indent ) With second diverse control
68 . (1 indent ) Electrical trip actuation
69 .. (2 indent ) Trip operated on failure of electric power
70 .. (2 indent ) With electrical resetting means
71 ... (3 indent ) Rotary electric motor
72 . (1 indent ) Weight biased trip
73 . (1 indent ) Fluid pressure trip actuation
74 . (1 indent ) Mechanical movement trip actuation
77 LOST MOTION BETWEEN ACTUATOR AND VALVE
79 . (1 indent ) Overload release
80 .. (2 indent ) Elastic
81 .. (2 indent ) Slip coupling between actuator and valve
82 . (1 indent ) Check valve with external opening and closing means
84 VALVE HEAD MOVABLY CONNECTED FOR ACCOMMODATION TO SEAT
85 . (1 indent ) With yieldable connection
86 . (1 indent ) With universal connection
87 . (1 indent ) With single plane swing pivoted connection
88 . (1 indent ) Rotatable only
89 WITH MEANS FOR BLOCKING OR DISABLING ACTUATOR
89.5 . (1 indent ) Actuator, or blocking means, includes flow path joint
90 . (1 indent ) Attachments
91 .. (2 indent ) Requiring modification of valve
92 .. (2 indent ) Acting on valve limit stop
93 ... (3 indent ) Mounted on valve actuator
94 . (1 indent ) Fluid pressure biased latch
95 . (1 indent ) Released by non-valving actuator motion
96 .. (2 indent ) Linear reciprocation of rotary handle
97 ... (3 indent ) Latch connects actuator to body through head
98 .. (2 indent ) Pivoted handle
99 ... (3 indent ) With spring
100 .. (2 indent ) Rotation of reciprocating handle
101 . (1 indent ) Latch manipulator mounted on handle or stem
102 .. (2 indent ) Constrained linear motion
103 ... (3 indent ) With pivoted latch
104 ... (3 indent ) With latch rigidly associated with manipulator
105 .... (4 indent ) Latch lug extends transversely to axis of manipulator
106 ... (3 indent ) With transversely movable latch
107 .. (2 indent ) With pivoted latch
108 ... (3 indent ) Resilient latch and manipulator
109 ... (3 indent ) With spring
110 .. (2 indent ) With reciprocating latch
111 . (1 indent ) Latch manipulator mounted on valve body
112 .. (2 indent ) Set screw
113 .. (2 indent ) Constrained linear motion of latch with rigidly associated manipulator
114 .. (2 indent ) With pivoted latch
115 ... (3 indent ) Resilient latch and manipulator
116 ... (3 indent ) With spring
117 WITH RESTRICTOR IN PARALLEL TO MAIN VALVE
118 WITH MATERIAL GUIDE OR RESTRICTOR
119 . (1 indent ) Aspirated stem drain
120 . (1 indent ) Movable or resilient guide or restrictor
121 .. (2 indent ) Adjustable guide or restrictor
122 ... (3 indent ) Tapered metering plug
123 . (1 indent ) Valve at point of greatest restriction
124 .. (2 indent ) Venturi restrictor
125 . (1 indent ) Drop forming restrictor
126 . (1 indent ) Spiral guide or spiral restrictor
127 . (1 indent ) Baffle or zigzag flow restrictor
128 WITH DETACHABLE ACTUATOR AND MEANS TO PREVENT LEAKAGE WHEN ACTUATOR IS DETACHED
129.01 ELECTRICALLY ACTUATED VALVE
129.02 . (1 indent ) With means to bias valve open
129.03 . (1 indent ) With nonelectrical actuator
129.04 . (1 indent ) Remote or follow-up control system for electrical actuator
129.05 . (1 indent ) Having means to produce digital pulses
129.06 . (1 indent ) Having element dimensionally responsive to field
129.07 . (1 indent ) Balanced valve
129.08 . (1 indent ) Having means to produce proportional flow
129.09 . (1 indent ) Solenoid having plural coils
129.1 .. (2 indent ) Coils have common axis
129.11 . (1 indent ) Rotary electric actuator
129.12 .. (2 indent ) With limit control
129.13 .. (2 indent ) With speed or braking control
129.14 . (1 indent ) Freely rotatable ball valve
129.15 . (1 indent ) Including solenoid
129.16 .. (2 indent ) Having plate-shaped armature
129.17 .. (2 indent ) Having diaphragm between coil and opening controlled
129.18 .. (2 indent ) With means to adjust stroke of armature
129.19 .. (2 indent ) Lost motion between valve and valve actuator
129.2 .. (2 indent ) Mechanical movement between valve and solenoid
129.21 .. (2 indent ) Coil surrounds valve port or flow line
129.22 .. (2 indent ) Solenoid within flow line
142 WITH CORRELATED FLOW PATH
149 . (1 indent ) Valve operated by joining flow path sections
149.1 .. (2 indent ) Joining motion includes linear valve operating component
149.2 ... (3 indent ) Valve rotatably or hingedly mounted
149.3 ... (3 indent ) Valve motion is transverse to, or opposed to, the linear component
149.4 ... (3 indent ) Joint includes screw thimble
149.5 ... (3 indent ) Of rotatable flow path section
149.6 ... (3 indent ) Motion opposed by valve spring
149.7 .... (4 indent ) Contact only, or friction, joint
149.8 . (1 indent ) Valve operated by motion of flow path
149.9 . (1 indent ) Flow path joint interlocked with valve or actuator
145 . (1 indent ) Pipe side
146 .. (2 indent ) Clamp type coupling
147 . (1 indent ) Pipe end (terminal valve)
148 . (1 indent ) Pipe coupling or union
150 .. (2 indent ) Flexible or expansible
151 .. (2 indent ) Non-rotatable conduit coupling
152 .. (2 indent ) Valve seat and coupling element removable as a unit
143 . (1 indent ) With mounting or support
153 . (1 indent ) With particular outlet or inlet
154 .. (2 indent ) Fluid deflecting means at outlet
155 .. (2 indent ) Nozzle or spout
156 ... (3 indent ) With receptacle accommodating feature
157 WITH MEANS TO INCREASE HEAD AND SEAT CONTACT PRESSURE
158 . (1 indent ) With positive reduction
159 .. (2 indent ) Seat pressed to valve
160 .. (2 indent ) Rotary valve
161 ... (3 indent ) Independent actuation
162 ... (3 indent ) Cam or wedge
163 .... (4 indent ) Encased
164 ... (3 indent ) Screw
165 .... (4 indent ) Non-reciprocating
166 .... • (5 indent ) With slip coupling
167 .. (2 indent ) Bifaced
168 ... (3 indent ) Screw
169 ... (3 indent ) Toggle
170 . (1 indent ) Seat pressed to valve
171 .. (2 indent ) Packing presed by gland
172 .. (2 indent ) Fluid pressure
173 ... (3 indent ) Butterfly valve
174 .. (2 indent ) Spring
175 . (1 indent ) Fluid pressure
177 .. (2 indent ) Pivoted valve
178 ... (3 indent ) Bifaced
179 ... (3 indent ) Terminal
180 .. (2 indent ) Rotary valve
182 .... (4 indent ) Expanding
183 .... (4 indent ) Encased
184 .... • (5 indent ) At actuator end
185 ... (3 indent ) Spring in fluid
186 .. (2 indent ) Piston
187 . (1 indent ) Separate actuators or actuator motion
188 .. (2 indent ) Rotary valve
189 .. (2 indent ) Piston with expansible packing
191 .. (2 indent ) Packing expands with closing
192 . (1 indent ) Rotary valve
193 . (1 indent ) Gate valve
194 .. (2 indent ) Screw sole actuator of expander and valve
195 .. (2 indent ) Bifaced
196 ... (3 indent ) In both closed and open positions
197 ... (3 indent ) Faces pressed by subsequently movable expander
198 .... (4 indent ) With second expander
199 .... (4 indent ) Face element directly contacts casing
200 ... (3 indent ) Carried expander contacts valve casing
201 .... (4 indent ) Pivoting expander
202 ... (3 indent ) Faces or carrier contact stationary expander
203 .. (2 indent ) Cam or wedge
204 ... (3 indent ) Moves with respect to head and seat
205 WITH SELECTIVE FLOW REGULATION
206 . (1 indent ) Different sized bores in valve head
207 .. (2 indent ) Rotary plug
210 SEQUENTIAL OPENING OR CLOSING OF SERIAL PORTS IN SINGLE FLOW LINE (E.G., ANTI-SCORING)
211 SERIAL ALTERNATELY CLOSED PORTS
212 RELATIVELY MOVABLE VALVE ELEMENTS FORM SINGLE PORT CLOSURE (E.G., IRIS DIAPHRAGM)
213 MECHANICAL MOVEMENT ACTUATOR
214 . (1 indent ) Particularly packed or sealed
215 . (1 indent ) Plural motions of valve
216 .. (2 indent ) Screw threads in flow path
217 .. (2 indent ) Valve head between actuator and screw
218 .. (2 indent ) Encased
219 ... (3 indent ) Threadlessly coupled to screw
220 .... (4 indent ) Coupling socket in screw
221 ... (3 indent ) Threads in removable sleeve
222 .... (4 indent ) Sleeve removably in bonnet
223 .... (4 indent ) Sleeve is bonnet
224 .... (4 indent ) Sleeve flange mounted between body and bonnet
225 .. (2 indent ) Threads in removable sleeve
226 .. (2 indent ) Biased
227 ... (3 indent ) Spring
228 . (1 indent ) With pivoted valves
229 . (1 indent ) Plural dissimilar mechanical movements
230 . (1 indent ) Ratchet
232 .. (2 indent ) Train (plural serial)
233 .. (2 indent ) Leverage variable during operation
234 .. (2 indent ) Adjustable leverage
235 .. (2 indent ) Swiveled
236 .. (2 indent ) Biased
237 ... (3 indent ) Sliding contact
238 .... (4 indent ) Spring
239 .... • (5 indent ) Spring co-axial with valve arm
240 .... • . (6 indent ) Spring stop on valve stem
241 .... • . (6 indent ) Spring abuts valve stem guide
242 ... (3 indent ) Spring
243 .... (4 indent ) Co-acts with lever
244 .... (4 indent ) Co-axial with valve stem
245 .... • (5 indent ) Spring stop on valve stem
246 .... • (5 indent ) Spring abuts valve stem guide
247 ... (3 indent ) Weight
249 .. (2 indent ) Mutilated or Geneva gearing
249.5 .. (2 indent ) Worm type
250 .. (2 indent ) Rectilinear rack
250.5 .. (2 indent ) Mating segments
252 .. (2 indent ) Co-axial or parallel axes
253 ... (3 indent ) Biased
254 .... (4 indent ) Bi-directional
255 .... • (5 indent ) Non-reciprocating
256 .... (4 indent ) Encased
257 .. (2 indent ) Encased with seal
258 ... (3 indent ) Bi-directional
259 ... (3 indent ) Cam is finger-like extension
260 ... (3 indent ) Overhung crank type
261 ... (3 indent ) Center crank type
262 .. (2 indent ) Biased
263 ... (3 indent ) Spring
265 .. (2 indent ) Plural thread
266 .. (2 indent ) Non-reciprocating actuator
267 ... (3 indent ) Internal thread
268 .... (4 indent ) Inverted cup-shape
269 .... • (5 indent ) Separable actuator bushing
270 ... (3 indent ) Removable guide
271 .... (4 indent ) Resiliently mounted actuator
272 ... (3 indent ) Biased
273 .. (2 indent ) Internal thread
274 .. (2 indent ) Encased
275 ... (3 indent ) Biased
276 .... (4 indent ) Spring
277 .. (2 indent ) Biased
278 ... (3 indent ) Spring
279 . (1 indent ) Linkage
280 .. (2 indent ) Toggle
282 . (1 indent ) Reciprocating
285 . (1 indent ) Adjustable
286 . (1 indent ) Rotary valve
287 .. (2 indent ) Stop element on head
288 .. (2 indent ) Stop element on actuator
289 VALVE ACTUABLE FROM PLURAL POSITIONS
290 PLURAL SELECTIVE NEUTRAL POSITIONS FOR VALVE OR ACTUATOR
292 . (1 indent ) Rotary valve
293 EXTENSION FOR ACTUATOR
294 FLEXIBLE ACTUATOR (E.G., BOWDEN WIRE; CHAIN)
296 PLURAL MOTIONS OF ACTUATOR
299 . (1 indent ) Terminal
302 .. (2 indent ) Bifaced
305 . (1 indent ) Butterfly
306 .. (2 indent ) Head and/or seat packing
307 ... (3 indent ) Adjustable
308 .. (2 indent ) Head and stem connections
310 .. (2 indent ) Axial and radial bore
311 ... (3 indent ) Lateral inlet and outlet
312 .. (2 indent ) Retainer at actuator end
315.01 . (1 indent ) Ball valve
315.02 .. (2 indent ) Having a particular hardness (i.e., durometric property)
315.03 .. (2 indent ) Of specific material
315.04 ... (3 indent ) Ceramic (e.g., glass or fired clay)
315.05 ... (3 indent ) Nonmetallic
315.06 .. (2 indent ) Having a swinging actuator
315.07 .. (2 indent ) Eccentric seating
315.08 .. (2 indent ) Including trunnion opposite axially extending actuating means
315.09 ... (3 indent ) With removable trunnion cover
315.1 .. (2 indent ) Housing construction
315.11 ... (3 indent ) Head removable perpendicular to flow passage
315.12 .... (4 indent ) At the actuator side (i.e., top entry)
315.13 ... (3 indent ) Assembled around the head
315.14 ... (3 indent ) Head removable along one side of flow passage
315.15 ... (3 indent ) Having inseparable head
315.16 .. (2 indent ) Ball construction
314 . (1 indent ) Seat or interface seal
316 .. (2 indent ) Replaceable
317 ... (3 indent ) Deformable material
317.01 ... (3 indent ) Carried by head
319 . (1 indent ) Push or pull operator
320 .. (2 indent ) Biased
321 ... (3 indent ) Spring
322 .... (4 indent ) Spring stop on valve stem
323 .... (4 indent ) Spring abuts valve stem guide
325 .. (2 indent ) With internal flow passage
327 .. (2 indent ) Bifaced
329 .. (2 indent ) Bodies
330 . (1 indent ) Actuator controlled stem seal
331 . (1 indent ) Diaphragm
332 . (1 indent ) Diverse material seal at valve interface
333 . (1 indent ) Particular head and seat cooperation
334 .. (2 indent ) Elastic deformation
335.1 HERMETIC FLEXIBLE WALL SEAL FOR ACTUATOR
335.2 . (1 indent ) Diaphragm
335.3 . (1 indent ) Bellows
337 . (1 indent ) Springs and spring retainers
338 . (1 indent ) Weight biased
339 VALVE ACTUATOR EXTENDING THROUGH FLUID INLET OR OUTLET
340 VALVE ACTUATOR SURROUNDING PIPE, INLET OR OUTLET
341 VALVE ACTUATOR IS VALVE CASING OR EXTENSION THEREOF
342 . (1 indent ) Jointed or flexible wall
343 . (1 indent ) Sleeve valve
344 .. (2 indent ) Flow passage in sleeve
345 .. (2 indent ) Rotary
346 . (1 indent ) Plural motions of valve
347 . (1 indent ) Reciprocating valve
348 . (1 indent ) Biased valve
349 VALVE ACTUATOR IS INLET OR OUTLET
350 . (1 indent ) Detachable tip
351 . (1 indent ) Plural motions of valve
353 . (1 indent ) Reciprocating spout
354 . (1 indent ) Biased valve
355 WITH ACTUATION LUBRICATING MEANS
357 . (1 indent ) Removable seat engaging element
358 . (1 indent ) Reinforced flexible material
360 .. (2 indent ) Removable
361 ... (3 indent ) Mounted between casing sections
362 ... (3 indent ) Compression or tension retained
363 ... (3 indent ) With seal
364 .. (2 indent ) Head engaging gasket
365 .. (2 indent ) Retained by seat deformation
367 .. (2 indent ) Sectional
368 . (1 indent ) Materials
902 SPRINGS EMPLOYED AS VALVES
905 MOVABLE COIL ELECTRICAL ACTUATOR (E.G., VOICE COIL)
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .