This page requires javascipt to function properly
1 MEANS MAINTAINING STEP LEVER ON HORIZONTALLY PIVOTED LADDER
2.1 MEANS MAINTAINING PLATFORM LEVEL ON ANGULARLY MOVABLE SUPPORT
2.2 . (1 indent ) Adjustable to plural operating positions
2.3 . (1 indent ) Swingable support
2.4 .. (2 indent ) Of dielectric material
2.5 .. (2 indent ) Ladder associated
2.6 .. (2 indent ) Providing access to underside of elevated surface
2.7 .. (2 indent ) Parallelogram linkage
2.8 .. (2 indent ) Foldable hinged support
2.9 ... (3 indent ) Hydraulically operated
2.11 .. (2 indent ) Telescopic support
4 . (1 indent ) Window washer type
231 . (1 indent ) Attached to strand wound on reel, and means for retarding unwinding of strand
232 .. (2 indent ) Including spring for rewinding strand
233 .. (2 indent ) Fluid resistance brake
234 .. (2 indent ) Movable, friction brake element applied by centrifugal force
235 .. (2 indent ) Friction brake and occupant-operated mechanism for applying brake during descent
5 . (1 indent ) Strand-engaging, with descent retarder
6 .. (2 indent ) Leg or loop type
7 .. (2 indent ) With seat
8 . (1 indent ) Ladder-associated
9 . (1 indent ) With pole encircling or grasping means
10 INCLINED CABLE SUPPORTING CARRIER TRAVELING THEREALONG
11 . (1 indent ) Occupant-controlled
12 HORIZONTAL TRAVERSING - ACTUATION, CONTROL, OR RESPONSE
13 . (1 indent ) Occupant actuation or control
14 .. (2 indent ) Occupant-controlled ascent or descent
15 .. (2 indent ) Holding means
16 . (1 indent ) With handle or steering means
17 . (1 indent ) Holding means
18 WITH INDICATOR, SIGNAL OR ALARM
22 .. (2 indent ) Ladder of different type
23 ... (3 indent ) Stepladder prop pivoted to inverted position
24 .... (4 indent ) Stile and prop end abutting
25 .... (4 indent ) With spreader or tie
26 ... (3 indent ) Stepladder type with variable prop and ladder connection
27 .. (2 indent ) Scaffold
29 ... (3 indent ) Ironing board
30 .... (4 indent ) Board as pivoted ladder prop
31 .... • (5 indent ) Crossed leg board support
32 ... (3 indent ) Wash stand
33 .. (2 indent ) Chair or stool
33.2 ... (3 indent ) Bottom and legs invert to unveil ladder
33.3 ... (3 indent ) Steps on chair back
33.4 .... (4 indent ) Fixed steps
33.5 ... (3 indent ) Step withdraws from beneath seat
33.6 .... (4 indent ) End-for-end turnout
35 . (1 indent ) Furniture
36 TRAVERSING, TRACK-MOUNTED
37 . (1 indent ) With occupant elevating or lowering means
38 . (1 indent ) With vertically spaced second track
39 . (1 indent ) Ground- or floor-engaging
40 UPWARDLY EXTENSIBLE FLEXIBLE LADDER OR ESCAPE
41 . (1 indent ) Self-rigidifying
42 ENDLESS CONVEYER ESCAPE
43 . (1 indent ) Top and bottom support
44 .. (2 indent ) With pivoted or folding attached carrier
45 PITCHED ROOF CONFORMING SCAFFOLD
47 . (1 indent ) Fire or heat shield
48 CHUTE OR ESCAPE TOWER FOR PERSONNEL
49 . (1 indent ) With ladder
50 WITH PROJECTOR OR PROJECTILE
52 . (1 indent ) Conduit is support
53 DETACHABLE WINDOW SEAT TYPE
54 . (1 indent ) With step or additional platform
55 . (1 indent ) Platform below window
56 . (1 indent ) Extensible platform
57 . (1 indent ) Interior wall-engaging means
58 .. (2 indent ) Depending
59 ... (3 indent ) Saddle
60 .... (4 indent ) Wall-clamping means
61 .... (4 indent ) Exterior strut
62 .. (2 indent ) With outside strut or brace
62.5 WITH EXTENSIBLE VERTICAL AND NONVERTICAL SECTIONS
63.1 HAVING TRANSPOSITIONING BASE AND ERECTING MEANS
64.1 . (1 indent ) Ladder pivotably mounted on transpositioning base (e.g., on vehicle)
65.1 .. (2 indent ) About vertical axis
66.1 ... (3 indent ) Extension ladder (i.e., ladder having sliding section)
66.2 .... (4 indent ) Motor operated
67.1 .... (4 indent ) Manually operated
67.2 .... • (5 indent ) By use of screw
67.3 .... • (5 indent ) By use of gear
67.4 ... (3 indent ) Folding ladder
67.5 ... (3 indent ) Having screw rod for erecting ladder about horizontal pivot
68.1 .. (2 indent ) Extension ladder pivotally mounted to be erected about a horizontal axis
68.2 ... (3 indent ) Having winch means for erecting ladder
68.3 ... (3 indent ) Having gear means for erecting ladder
69.1 ... (3 indent ) Having lazy tong extending means
69.2 .... (4 indent ) And winch to actuate lazy tong
69.3 .... (4 indent ) And gear to actuate lazy tong
69.4 . (1 indent ) Telescopic erecting means
69.5 . (1 indent ) Erecting means actuated by lazy tong
69.6 . (1 indent ) And platform elevatable relative to its support
70 WITH STORAGE DEVICE FOR SUPPLE ESCAPE
74 .. (2 indent ) Escape of ladder type lowers upon release of latch
75 ... (3 indent ) With retarder or brake on reel
236 .. (2 indent ) With means for retarding unwinding of strand type escape
237 ... (3 indent ) Including spring for rewinding strand
238 ... (3 indent ) Fluid resistance brake
239 ... (3 indent ) Movable, friction brake element applied by centrifugal force
240 ... (3 indent ) Friction brake and occupant-operated mechanism for applying brake during descent
71 . (1 indent ) Occupant weight-actuated descent device
72 . (1 indent ) Occupant-controlled descent retarder
76 . (1 indent ) Wall-embedded
78 . (1 indent ) Door operates ladder
79 .. (2 indent ) Guided rigid ladder
80 ... (3 indent ) Guide on wall or frame
81 .. (2 indent ) Door and ladder on opposite sides of wall
82 WALL- OR FLOOR-ATTACHED
83 . (1 indent ) Wall-mounted platform, with ladder
84 .. (2 indent ) Movable platform with movable ladder
85 .. (2 indent ) Movable ladder
86 ... (3 indent ) Pivoted
87 . (1 indent ) Embedded scaffold support member
88 . (1 indent ) Retractable or collapsible beneath floor, track-mounted
89 . (1 indent ) Spring-biased pivoted step or ladder
90 . (1 indent ) Independent rung or step
91 .. (2 indent ) Pivoted
92 .. (2 indent ) Readily detachable
94 .. (2 indent ) Wall penetrating operating means
95 .. (2 indent ) Folding, rigid components
96 ... (3 indent ) Parallelogram type
97 .. (2 indent ) Pivoted
98 ... (3 indent ) Normally counterbalanced to inoperative position
99 .. (2 indent ) With portion overhanging roof
100 . (1 indent ) Single pole or strand
101 LADDER WITH VERTICALLY MOVING PLATFORM OR ESCAPE
102 . (1 indent ) Ladder supports platform
103 .. (2 indent ) Stile or prop-guided carriage
104 PIVOTALLY CONNECTED LADDERS, MUTUALLY SUSTAINING
105 . (1 indent ) Central upright ladder section supported therebetween
106 WITH HANDRAIL OR GUARD FOR LADDER
107 SAFETY DEVICE FOR GROUND-SUPPORTED LADDER
108 . (1 indent ) Terminal foot or shoe
109 .. (2 indent ) Diverse ground-engaging means
110 .. (2 indent ) Suction cup
111 .. (2 indent ) Pivotal component
112 SAFETY DEVICE, PLATFORM ASSOCIATED
113 . (1 indent ) Railing
114 WITH SUCKER ROD SUPPORT
116 . (1 indent ) Platform with ladder as support
117 .. (2 indent ) Between spaced ladders
118 ... (3 indent ) Facing ladders
119 .... (4 indent ) Readily detachable platform
120 .. (2 indent ) Detachable step, single ladder
121 ... (3 indent ) Plural rung-engaging
122 .... (4 indent ) Stile-contacting
123 .. (2 indent ) Plural platforms
124 .. (2 indent ) Ladder with pivoted ladder prop and pivoted platform
125 .. (2 indent ) Platform positioned by ladder and prop divergence
126 .. (2 indent ) Prop-pivoted platform
127 LADDER WITH LAND VEHICLE
128 SCAFFOLD SUPPORTED INTERNALLY ON SHAFT
130 PLURAL PLATFORMS, COMMON SUPPORT
131 . (1 indent ) Mounted for relative motion
132 . (1 indent ) Stepped
133 POLE OR STRAND GRASPING-TYPE CLIMBER
134 . (1 indent ) Foot- or leg-attachable
135 .. (2 indent ) With diverse holding means for occupant
136 . (1 indent ) Alternate grasping
138 . (1 indent ) Sheet or net type
139 .. (2 indent ) Tensioned peripherally
140 .. (2 indent ) Folding base
141 PLATFORM WITH ELEVATING OR LOWERING MEANS
142 . (1 indent ) Suspended
143 .. (2 indent ) Simultaneously operable suspension means
144 ... (3 indent ) Platform continuously level
145 .. (2 indent ) Separate (i.e., nonwork) support for suspension means
146 ... (3 indent ) Platform holding detent coacts with support
147 .. (2 indent ) Plural distinct elevating means
148 . (1 indent ) Operating means on platform
149 . (1 indent ) Trestle-type support, beam-elevating
151 KIT OR SEPARABLE PARTS
152 UNITARY FOLDABLE, RIGID SCAFFOLD OR LADDER
153 . (1 indent ) Trestle
154 .. (2 indent ) Crossed leg
155 .. (2 indent ) Legs foldable parallel to beam axis in all planes
156 . (1 indent ) Collapsible ladder
157 .. (2 indent ) Lazy tong type
158 ... (3 indent ) Mechanical or power-extending means
159 .. (2 indent ) Parallel moving side, pivoted rung or step
160 ... (3 indent ) Storage providing component
161 ... (3 indent ) Plural element stile
162 ... (3 indent ) With collapsible prop
163 .. (2 indent ) Folding stile
164 ... (3 indent ) Rung-to-rung stile sections
165 LADDER WITH PIVOTED PROP
166 . (1 indent ) Section extensible below prop pivot
167 .. (2 indent ) With step registration
168 . (1 indent ) Coplanar extension with prop pivoted to lower section
169 . (1 indent ) Single rear prop, pole type
170 . (1 indent ) Rear prop, laterally moving
171 . (1 indent ) Converging and contacting stiles or props
172 . (1 indent ) Lateral prop
173 . (1 indent ) Hinged to top-step rear flange
174 . (1 indent ) Pivoted to top-step cleat
175 .. (2 indent ) With cleat spaced spreader or tie
176 ... (3 indent ) Multiple link folding spreader
177 . (1 indent ) Overlapping stile and prop
178.2 . (1 indent ) Ladder section
178.3 .. (2 indent ) Male and female connecting means
178.4 .. (2 indent ) Overlapping sections
178.5 . (1 indent ) Male and female connecting means
178.6 .. (2 indent ) Double-ended pin
180.1 . (1 indent ) Ladder
180.2 .. (2 indent ) Having supporting base
180.3 ... (3 indent ) Vertically pivoted to supporting base
181.1 . (1 indent ) Scaffold horse (e.g., trestle)
182.1 .. (2 indent ) Having height adjustable beam
182.2 ... (3 indent ) By extensible leg brace
182.3 .... (4 indent ) Step-by-step adjustment
182.4 ... (3 indent ) By slidable leg
182.5 ... (3 indent ) By extensible leg
183.1 .. (2 indent ) Having longitudinally extensible beam
185.1 .. (2 indent ) Having unitary leg to beam coupler and brace
186.1 .. (2 indent ) Beam clamped by leg actuation
186.2 ... (3 indent ) Pivotally connected legs
186.3 .. (2 indent ) Having leg to beam attaching bracket
186.4 .. (2 indent ) Leg coupled directly to beam
186.5 .. (2 indent ) Knockdown
186.6 . (1 indent ) Having height adjustable platform
186.7 . (1 indent ) Connector for horizontal or diagonal brace
186.8 .. (2 indent ) Releasable connector
186.9 . (1 indent ) Having cantilivered auxillary platform
187 SCAFFOLD EXTERNAL OF SHAFT
188 . (1 indent ) Horizontally adjustable
189 SINGLE STILE, STRAND OR POLE
190 . (1 indent ) Flexible
191 .. (2 indent ) With sliding carrier
192 ... (3 indent ) Load-responsive brake
193 ... (3 indent ) Occupant-actuated brake
195 . (1 indent ) Slidable nested single rung units
196 . (1 indent ) Flexible
197 .. (2 indent ) With spacer
198 ... (3 indent ) Rung-attached
199 .. (2 indent ) Plural spaced strand stile member
200 . (1 indent ) Supporting surface compensating means
201 .. (2 indent ) Stile extension
202 ... (3 indent ) Equalizing extensions
203 ... (3 indent ) Rung-engaging means
204 ... (3 indent ) Increment adjustment
205 .... (4 indent ) Ratchet type
206 . (1 indent ) With hook or grab
207 . (1 indent ) Extension
208 .. (2 indent ) Mechanical or power-extending
209 .. (2 indent ) With latch
210 ... (3 indent ) Section movement actuated
211 .... (4 indent ) Spring-biased latch
212 ... (3 indent ) With remote control of latch
213 .... (4 indent ) Elevating cable actuated
214 . (1 indent ) With spacer means
215 . (1 indent ) Rung sandwiched between elements of composite stile
216 . (1 indent ) Tie rod assembled
217 . (1 indent ) With reinforcing means
218 .. (2 indent ) Bow string type
219 .. (2 indent ) For side rail
220 . (1 indent ) Independent support for rung
221 LEG OR SHOE ATTACHABLE POLE CLIMBER
223 . (1 indent ) Relatively movable sections
224 SCAFFOLD HORSE BEAM OR LEG
225 . (1 indent ) Relatively movable
226 .. (2 indent ) Beam clamped by pivoting leg
227 .. (2 indent ) With intermediate staff
228.1 RUNG OR RUNG-TO-STILE CONNECTION
228.2 . (1 indent ) Rung having anti-skid surface
228.3 . (1 indent ) Bracket-type connection
228.4 . (1 indent ) Sleeve-type connection
228.5 . (1 indent ) Rung for a motor vehicle
228.6 . (1 indent ) Hollow rung
241 MOVABLE STRAND ESCAPE AND MEANS FOR RETARDING TRAVEL OF STRAND
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .