This page requires javascipt to function properly
3 .. (2 indent ) Compacting and binding
4 . (1 indent ) With automatic or material-triggered control
5 . (1 indent ) With material winding or folding
6 . (1 indent ) With material severing
7 . (1 indent ) With material depositing or discharging
8 . (1 indent ) Binder applying
9 .. (2 indent ) Preformed continuous annular binder
10 .. (2 indent ) With precutting of binder to length
11 .. (2 indent ) Plural flexible section binder
12 .. (2 indent ) Through annular material
13 .. (2 indent ) Helically along material
14 .. (2 indent ) Indexing material between successive placements
15 .. (2 indent ) By rotation of material
16 .. (2 indent ) By swing of material gripping jaw
17 .. (2 indent ) Binder supported across passageway for material
18 ... (3 indent ) With material conveyer
19R .... (4 indent ) With threader crossing material path
20 .... • (5 indent ) Delivering binder to end gripper
21 .... • . (6 indent ) Concurrently delivering to joiner
22 .... • .. (7 indent ) Indexing gripper
23 .... • . (6 indent ) Shifting gripper delivers binder to joiner
24 .... • (5 indent ) Threaders
19A .... • (5 indent ) Needle brake
25 .. (2 indent ) Curved guide channel for pushed binder
26 ... (3 indent ) Material receiving loop channel
27 .. (2 indent ) Orbit traveling binder placer
28 ... (3 indent ) Reversing for successive placements
29 . (1 indent ) Binder tighteners and joiners
30 .. (2 indent ) Sleeve or clamp joining
31 .. (2 indent ) Twisters
32 . (1 indent ) Binder tighteners
33R . (1 indent ) Joiners
33PB .. (2 indent ) Plastic band
34 . (1 indent ) Binder retaining material holders
36 . (1 indent ) With pre-enclosing in textile
37 . (1 indent ) With separation from material of liquid expressed
38 . (1 indent ) With heating or cooling
39 . (1 indent ) With cutting or comminuting
40 . (1 indent ) With winding or folding
41 . (1 indent ) Forcing through constricted passage
42 . (1 indent ) Successive compressions from different directions
43 AUTOMATIC OR MATERIAL TRIGGERED CONTROL
44 . (1 indent ) Of insertion of separator between successive material charges
45 . (1 indent ) of material addition, deposition, or discharging
46 . (1 indent ) Of parallelism of platens
47 . (1 indent ) Of roll separation or speed
48 . (1 indent ) Of actuating means
49 .. (2 indent ) Material presence or position starting
50 .. (2 indent ) By pressure applied to material
51 ... (3 indent ) With dwell time control
52 ... (3 indent ) Reversing
342 . (1 indent ) Means to disable or to forestall power to the press
343 .. (2 indent ) Multiple triggers to start
344 ... (3 indent ) Requires the use of both hands
345 .. (2 indent ) Associated with door or cover
346 .. (2 indent ) Overload protection
347 .. (2 indent ) Hydraulic or pneumatic safety system
348 .. (2 indent ) Optical condition sensor
349 . (1 indent ) Barrier type (e.g., guard, shield, screen, hood, etc.)
350 .. (2 indent ) Blocking mechanism between press surfaces
351 .. (2 indent ) Convoluted or elongated feed chute
352 .. (2 indent ) Debris shield attached to moving press member
54 PORTABLE RECEPTACLE LID APPLYING
55 . (1 indent ) With receptacle transfer means
56 . (1 indent ) With lid fastening
57 . (1 indent ) With gathering of contents
58 . (1 indent ) With lid locating means
59 . (1 indent ) Receptacle mountable
60 . (1 indent ) Upwardly displaced receptacle
61 . (1 indent ) Concurrently pressing spaced areas of lid
62 .. (2 indent ) Loops or bails receiving receptacle
63 .. (2 indent ) Approaching arms embracing receptacle
64 .. (2 indent ) Translating projecting arms
65 COMPACTING ENSILAGE WITHIN SILO
66 . (1 indent ) With depositing or distributing
67 . (1 indent ) Silo wall guide rollers
68 . (1 indent ) Vertical center post guided rollers
69 . (1 indent ) Tamper suspended within silo
70R WITH ADDITIONAL TREATMENT OF MATERIAL
71 . (1 indent ) Adding materials
72 .. (2 indent ) Recycling
73 .. (2 indent ) Liquid and/or steam
74 ... (3 indent ) To material being fed or conveyed
75 .... (4 indent ) Interstage
76 . (1 indent ) Winding or folding sheet, web or strand
77 .. (2 indent ) With subsequent transfer to repressing press
78 .. (2 indent ) With shape retaining means
79 .. (2 indent ) With winding mandrel stripper
80 .. (2 indent ) Folding zigzag
81 ... (3 indent ) Pivoted receiver
82 .. (2 indent ) Circularly deposited through eccentric opening
83 ... (3 indent ) With presser roll along opening
84 ... (3 indent ) With pusher moving to opening
85 ... (3 indent ) Receding receiver
86 .. (2 indent ) Mandrel and opposed presser roll
87 .. (2 indent ) Apron type (embracing belt loop)
88 .. (2 indent ) Between opposed belts
89 .. (2 indent ) Within group of three or more rolls
90 . (1 indent ) Separating materials (vacuumizing here)
91 .. (2 indent ) Plural solids
92 . (1 indent ) Heating, cooling, or drying
300 .. (2 indent ) Press for a brake lining
301 ... (3 indent ) Electric heater
302 .. (2 indent ) Plural diverse presses
303 .. (2 indent ) In press material handling train
304 ... (3 indent ) In feed train
305 .. (2 indent ) In press
306 ... (3 indent ) Endless conveyor-type press
307 .... (4 indent ) Plural endless conveyor presses
308 .... (4 indent ) Means to control temperature
309 .... (4 indent ) Multiple temperature treating zones
310 .... • (5 indent ) Having cooling
311 .... (4 indent ) Platen in thermal contact with endless conveyor
312 .... • (5 indent ) Having cooling
313 .... (4 indent ) Drum in thermal contact with endless conveyor
314 .... • (5 indent ) Having cooling
315 ... (3 indent ) Reciprocating platen-type press
316 .... (4 indent ) Piston and box type
317 .... • (5 indent ) Heating or cooling element in box wall
318 .... • . (6 indent ) Electric heater
319 .... (4 indent ) Means to control temperature
320 .... (4 indent ) Electric heater
321 .... (4 indent ) Platen having particular thermally conductive feature
322 .... (4 indent ) Temperature modulating insert
323 .... (4 indent ) Press apparatus thermally insulated from heating/cooling means
324 .... (4 indent ) Plural reciprocating platens
325 .... • (5 indent ) Heating or cooling element in platen
326 .... (4 indent ) Heating or cooling element in platen
327 ... (3 indent ) Roll-type press
328 .... (4 indent ) Electric heater
329 .... (4 indent ) Means to independently heat or cool different sections of roll
330 .... (4 indent ) Roll surface has particular thermally conductive feature
331 .... (4 indent ) Plural stage or pass
332 .... (4 indent ) Roll temperature conditioning means is external of roll, but in direct temperature conditioning contact with roll
333 .... • (5 indent ) Gas (e.g., steam)
334 .... (4 indent ) Roll heated or cooled internally
335 .... • (5 indent ) Temperature conditioning fluid flow passage in roll surface
336 .... • (5 indent ) Roll core has a temperature conditioning fluid flow passage
337 ... (3 indent ) Helix-type press
338 .... (4 indent ) Plural helices
339 .... (4 indent ) Temperature conditioning means in chamber wall or jacket
340 .... (4 indent ) Temperature conditioning means within helix
94 . (1 indent ) Cutting, breaking, piercing, or comminuting
95 .. (2 indent ) In press material handling train
96 ... (3 indent ) In feed train
97 .... (4 indent ) Cutter
98R .. (2 indent ) In press
98A ... (3 indent ) Hay bale hole puncher
70A . (1 indent ) Crop crushing
99 WITH ALARM, SIGNAL, INDICATOR, OR TEST MEANS
100 WITH GROUND-TRAVERSING WHEELS OR GUIDES
101 WITH CLOTH ABOUT CAKE ENFOLDER
104 WITH DRAIN MEANS FOR EXPRESSED LIQUID
105 . (1 indent ) Plural liquids (peel oil)
106 . (1 indent ) Liquid impelling means
107 . (1 indent ) Drain tube inbedded in material
108 .. (2 indent ) With piercing point or edge
109 .. (2 indent ) Stacked boxes or plates
110 . (1 indent ) Drainage through or along pressure surface
111 .. (2 indent ) With valve or adjustable flow regulator
112 .. (2 indent ) With clearer or cleaner
113 .. (2 indent ) Stacked boxes or plates
114 ... (3 indent ) Flexibly connected
115 ... (3 indent ) Boxes or plates
116 .. (2 indent ) Movable surface
117 ... (3 indent ) Helix
118 ... (3 indent ) Endless conveyer
119 .... (4 indent ) Trough forming
120 .... • (5 indent ) Material enclosing
122 .. (2 indent ) Textile containing pressure surface
123 ... (3 indent ) Pendant bag type
124 ... (3 indent ) Textile sustaining hoops
125 .. (2 indent ) Fixed abutment or end wall surface
126 . (1 indent ) Drainage through or along surface spanning pressure surfaces
127 .. (2 indent ) Box, frame, cage, or annular wall
128 ... (3 indent ) Assembled rings or hoops
129 ... (3 indent ) Assembled slats or staves
130 . (1 indent ) External strainer
131 . (1 indent ) Expressed liquid collector or receptor
132 .. (2 indent ) Demountably supporting press
133 ... (3 indent ) Drinking receptacle type
134 .. (2 indent ) With dispenser
135 ... (3 indent ) Pouring spout
136 . (1 indent ) Guards or shields
137 PLURAL DIVERSE PRESSES
138 . (1 indent ) With subsequent press conveying while pressing
139 .. (2 indent ) Successive diverse presses each conveying
140 .. (2 indent ) Loaded from other type press by transfer
141 .. (2 indent ) Loaded by transversely moving platen or packer
142 ... (3 indent ) Moving through inlet
143 ... (3 indent ) Plural transversely moving platens
144 CONCURRENT PRESSING AND CONVEYING
145 . (1 indent ) Helix-type compressor
146 .. (2 indent ) Right and left helices
147 .. (2 indent ) Overload release (yieldable choke)
148 .. (2 indent ) With valve or choke adjustment
149 .. (2 indent ) Detachable choke
150 .. (2 indent ) Helix interengaging abutment
151 . (1 indent ) Endless conveyer type
152 .. (2 indent ) With conveyer charging or discharging means
153 .. (2 indent ) Co-acting presser roll
154 .. (2 indent ) With intermediate backup device
155R . (1 indent ) Roll type
156 .. (2 indent ) Non-rotary co-acting press element
157 .. (2 indent ) External and internal rolls
158R .. (2 indent ) Intersecting or inclined roll axes
158C ... (3 indent ) Opposed discs
159 .. (2 indent ) Vertical roll axes
160 .. (2 indent ) With backing roll
161 .. (2 indent ) Plural stage or pass
162R ... (3 indent ) Common roll
163R .... (4 indent ) Yieldable
164 .... • (5 indent ) Adjustable line of force
165 .... • (5 indent ) Differentially
163A .... • (5 indent ) Calendar pressure regulation
166 .... (4 indent ) With turn plate or roll
162B .... (4 indent ) Roll crown control
167 ... (3 indent ) Chute or conveyer between stages
168 .. (2 indent ) Roll adjustment
169 ... (3 indent ) Yieldable
170 .... (4 indent ) Fluid pressure
171 .... (4 indent ) Spring
172 .. (2 indent ) Roll drive
173 .. (2 indent ) With material handling or guiding
174 ... (3 indent ) Roll strippers
175 ... (3 indent ) Roll bearing guards
176 .. (2 indent ) Roll pairs
155G .. (2 indent ) Glass making
177 . (1 indent ) Moving compression chamber
178 .. (2 indent ) Platen or piston type
179 . (1 indent ) Plunger and casing type
180 .. (2 indent ) With successive charge separating means
181 ... (3 indent ) Plunger carried separator supply
182 ... (3 indent ) Separator series on endless belt
183 ... (3 indent ) Pusher inserted
184 ... (3 indent ) Separator structure
185 .. (2 indent ) Plural compression chambers
186 ... (3 indent ) Aligned oppositely conveying
187 .. (2 indent ) With material rebound restrainer or tucker
188R .. (2 indent ) With feeding or discharge handling
189 ... (3 indent ) Conveying to or through inlet
188BT ... (3 indent ) Bale thrower
190 .. (2 indent ) With inlet closure
191 .. (2 indent ) Adjustable choke
192 ... (3 indent ) Overload relieving (yieldable)
194 . (1 indent ) Stacked boxes or plates
195 .. (2 indent ) Plural stacks
196 .. (2 indent ) With charging and/or discharging
197 ... (3 indent ) Fluent supply
198 ... (3 indent ) Cake loosening or ejecting
199 .. (2 indent ) With positioning or supporting means
202 .. (2 indent ) Hinged plates
203 .. (2 indent ) Box or pot type
204 ... (3 indent ) With compression lock
205 ... (3 indent ) With openings (e.g., for removing or loosening cake)
206 ... (3 indent ) Separable sections
207 . (1 indent ) With material transfer from press to press
208 . (1 indent ) Concurrently actuated
209 .. (2 indent ) Alternately compressing
211 WITH FLEXIBLE OR DEFORMABLE PRESSURE SURFACE
212 . (1 indent ) Circumferentially tightened loop
213 INTERFITTING CUPS - FRUIT JUICER TYPE
214 RECIPROCATING PRESS CONSTRUCTION
215 . (1 indent ) With material depositing means
216 .. (2 indent ) Feeder controlled plunger actuation
217 .. (2 indent ) Box traversing spreader
218 . (1 indent ) With material displacing means (e.g., ejector)
219 . (1 indent ) With platen position or compression lock
220 . (1 indent ) With material rebound restrainer
221 . (1 indent ) Plural or indexing material supports or receptacles
223 .. (2 indent ) Rotary
224 .. (2 indent ) Slidable
225 .. (2 indent ) Partitioned or compartmented box
226 . (1 indent ) With transversely displaceable piston or movable platen
227 .. (2 indent ) Portable receptacle mountable
228 .. (2 indent ) Pivoted or detachable beam
229R . (1 indent ) With transversely displaceable box, receptacle, or stationary platen
229A .. (2 indent ) Compressing in separable container
230 . (1 indent ) Central strain rod type
231 . (1 indent ) C-frame type
232 . (1 indent ) Plural movable platens on intersecting paths
233 . (1 indent ) Oscillatory or hinged platen or piston
234 .. (2 indent ) Plier type
235 ... (3 indent ) With impaling support for material
236 .. (2 indent ) Parallel spaced pairs
237 . (1 indent ) Plural movable platens on side-by-side paths
238 . (1 indent ) Combined reciprocating and rotating piston or platen
239 .. (2 indent ) Piston advanced by box rotation
240 . (1 indent ) Box and piston type
241 .. (2 indent ) Piston carried box frame scrapers
242 .. (2 indent ) Adjustable size
243 .. (2 indent ) Plier type (i.e., plural handles)
244 .. (2 indent ) Plural opposing pistons
245 .. (2 indent ) Box guided piston
246 .. (2 indent ) Movable or removable box section
247 ... (3 indent ) Separable box head and box frame
248 .... (4 indent ) Insert of false head
249 .... (4 indent ) With guided motion
250 .... • (5 indent ) Pivoted
251 .... • (5 indent ) Axially slidable
252 ... (3 indent ) Separable box frame sections
253 .... (4 indent ) Piston operator actuated frame section
254 .... (4 indent ) Counterbalanced
255 .... (4 indent ) Hinged
256 . (1 indent ) Platen tripped stop or reverse
257 . (1 indent ) Range of movement adjustment
258R . (1 indent ) Platen level compensating
258A .. (2 indent ) Parallel pressure surfaces
259 . (1 indent ) With plunger return cushioning
260 . (1 indent ) With actuation releasing for rebounding or biased return
261 .. (2 indent ) Over center releasing
262 .. (2 indent ) Disengaging rack and pinion
263 .. (2 indent ) Interruption in rotated camming surface
264 . (1 indent ) Opposed platens both actuated
265 . (1 indent ) Spring or weight
266 .. (2 indent ) Return bias
267 ... (3 indent ) Opposing flexible element actuator
268 .. (2 indent ) Interposed in actuating mechanism
269.01 . (1 indent ) Fluid pressure actuation
270 .. (2 indent ) Combined with mechanical actuation
271 ... (3 indent ) Mechanical force mutiplier
272 .... (4 indent ) Toggle
269.02 .. (2 indent ) Platen moved by elastically deformable pressure member
269.03 ... (3 indent ) Plural pressure members
269.04 ... (3 indent ) Inflatable bag
269.05 .. (2 indent ) Pressure intensifier
269.06 .. (2 indent ) Multiple or staged driving means
269.07 ... (3 indent ) Displacement additive
269.08 ... (3 indent ) Pressure additive
269.09 .... (4 indent ) Axially aligned pistons
269.1 .... (4 indent ) Independently actuated
269.11 .... (4 indent ) Pull-down press
269.12 .. (2 indent ) Platen positioning means
269.13 .. (2 indent ) Pull-down press
269.14 .. (2 indent ) Fluid supply system detail
269.15 ... (3 indent ) Manually operable fluid system
269.16 ... (3 indent ) Particular valve feature
269.17 .. (2 indent ) Frame assembly detail
269.18 .. (2 indent ) Rod, piston, or cylinder detail
269.19 ... (3 indent ) Cylinder position adjustment
269.2 ... (3 indent ) Platen pivotally connected to piston or rod
269.21 ... (3 indent ) Gasket or packing around piston
273 . (1 indent ) Speed or power variable by power path selection
274 . (1 indent ) Intermittent actuator
275 .. (2 indent ) Plural
276 ... (3 indent ) Acting at opposite ends of cross bar on movable platen
277 ... (3 indent ) Cross connected alternately acting
278 . (1 indent ) Flexible element actuator
279 .. (2 indent ) Varying radius windlass
280 . (1 indent ) With mechanical force multiplier
281 .. (2 indent ) Transversely forced linkage joint (single toggles here)
282 ... (3 indent ) Shaft turned cam or crank and pitman
283 ... (3 indent ) Lever in linkage
284 .... (4 indent ) Lever carried toothed sector
285 .... (4 indent ) Plural
286 ... (3 indent ) Plural toggle joints
287 .... (4 indent ) Screw and nut between joints
288 .. (2 indent ) Rack and pinion
289 .. (2 indent ) Screw and nut
290 ... (3 indent ) Plural screws
291 .. (2 indent ) Cam or tapering wedge
292 ... (3 indent ) Rotary or swinging
293 .. (2 indent ) Fixed fulcrum lever
294 .. (2 indent ) Plural oppositely moving struts
295 PLATENS OR PRESSURE SURFACES
296 . (1 indent ) Flexibly connected opposed
297 . (1 indent ) Porous mats
298 CLOTHS FROM CAKE STRIPPERS
901 SCRAP AUTO BODY CRUSHERS
905 . (1 indent ) Inner roll
906 . (1 indent ) Reciprocating
908 . (1 indent ) Series rolls
909 . (1 indent ) Adjustable die openings
915 FIXED UPPER RAM, LOWER MOVABLE RECEPTACLE
916 COIL TIGHTENER AND BINDER
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
WITH ADDITIONAL TREATMENT OF MATERIAL (100/70 R)
. (1 indent ) Heating, cooling, or drying (100/92)
FOR100 .. (2 indent ) In press (100/93R)
FOR101 ... (3 indent ) Platen press (100/93P)
FOR102 .... (4 indent ) Brake lining (100/93PB)
FOR103 ... (3 indent ) Roll press (100/93RP)
FOR104 ... (3 indent ) Screw press (100/93S)
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .