This page requires javascipt to function properly
600 . (1 indent ) Electrical musical tone generation
601 .. (2 indent ) Data storage
602 ... (3 indent ) Digital memory circuit (e.g., RAM, ROM, etc.)
603 .... (4 indent ) Sampling (e.g., with A/D conversion)
604 .... (4 indent ) Waveform memory
605 .... • (5 indent ) Read out at different rates
606 .... • (5 indent ) Read out at fixed rate
607 .... • (5 indent ) Recursive algorithm
608 .... (4 indent ) Fourier coefficient memory
609 .... (4 indent ) Note sequence
610 .... • (5 indent ) Accompaniment
611 .... • . (6 indent ) Rhythm
612 .... • .. (7 indent ) Tempo control
613 .... • . (6 indent ) Chords
614 .... • . (6 indent ) Reiteration
615 .... (4 indent ) Selecting circuits
616 .... • (5 indent ) Fundamental tone detection or extraction
617 .... • (5 indent ) Multiplexing or scanning
618 .... • (5 indent ) Priority or preference circuits
619 .... • (5 indent ) Transposition
620 .... • (5 indent ) Stops
621 .... (4 indent ) Noise reduction (e.g., error prevention, etc.)
622 .... (4 indent ) Tone synthesis or timbre control
623 .... • (5 indent ) Time varying or dynamic Fourier components
624 .... • (5 indent ) Modulation
625 .... • (5 indent ) Mixing
626 .... (4 indent ) Expression or special effects (e.g., force or velocity responsive, etc.)
627 .... • (5 indent ) Envelope shaping (i.e., attack, decay, sustain, or release)
628 .... • (5 indent ) Portamento or glissando
629 .... • (5 indent ) Vibrato or tremolo
630 .... • (5 indent ) Reverberation
631 .... • (5 indent ) Chorus, ensemble, or celeste
632 .... • (5 indent ) Chiff or percussive transients
633 .... • (5 indent ) Loudness control
634 .... (4 indent ) Accompaniment
635 .... • (5 indent ) Rhythm
636 .... • . (6 indent ) Tempo control
637 .... • (5 indent ) Chords
638 .... • (5 indent ) Arpeggio
639 ... (3 indent ) Photoelectric
640 .... (4 indent ) Variable speed
641 ... (3 indent ) Magnetic
642 .... (4 indent ) Tape
643 ... (3 indent ) Capacitive
644 ... (3 indent ) Constructional details
645 ... (3 indent ) MIDI (musical instrument digital interface)
646 .. (2 indent ) Fret control
647 .. (2 indent ) Digital combinational circuit
648 ... (3 indent ) With frequency multiplication or division
649 ... (3 indent ) Note sequence
650 .... (4 indent ) Accompaniment (e.g., chords, etc.)
651 .... • (5 indent ) Rhythm
652 .... • . (6 indent ) Tempo control
653 ... (3 indent ) Selecting circuits
654 .... (4 indent ) Fundamental tone detection or extraction
655 .... (4 indent ) Multiplexing or scanning
656 .... (4 indent ) Priority or preference circuits
657 .... (4 indent ) Transposition
658 .... (4 indent ) Force or velocity responsive
659 ... (3 indent ) Tone synthesis or timbre control
660 .... (4 indent ) Mixing
661 .... (4 indent ) Filtering
662 ... (3 indent ) Expression or special effects
663 .... (4 indent ) Envelope shaping (i.e., attack, decay, sustain, or release)
664 .... (4 indent ) Chorus, ensemble, or celeste
665 .... (4 indent ) Loudness control
666 ... (3 indent ) Accompaniment
667 .... (4 indent ) Rhythm
668 .... • (5 indent ) Tempo control
669 .... (4 indent ) Chords
670 ... (3 indent ) Constructional details
671 .. (2 indent ) Electric analog oscillators
672 ... (3 indent ) Variable frequency
673 .... (4 indent ) With variable filtering
674 .... (4 indent ) With space discharging means
675 ... (3 indent ) With frequency multiplication or division
676 .... (4 indent ) With transistor
677 .... (4 indent ) With space discharging means
678 ... (3 indent ) Selecting circuits
679 .... (4 indent ) With transistor
680 .... (4 indent ) With space discharging means
681 .... (4 indent ) Fundamental tone detection or extraction
682 .... (4 indent ) Multiplexing or scanning
683 .... (4 indent ) Noise reduction (e.g., error prevention, etc.)
684 .... (4 indent ) Priority or preference circuits
685 .... (4 indent ) Transposition
686 .... (4 indent ) Stops
687 .... (4 indent ) Force or velocity responsive
688 .... • (5 indent ) With magnetic selector
689 .... • (5 indent ) With capacitive selector
690 .... • (5 indent ) With variable resistance selector
691 ... (3 indent ) Noise reduction (e.g., error prevention, etc.)
692 ... (3 indent ) Tone synthesis or timbre control
693 .... (4 indent ) Time varying or dynamic Fourier components
694 .... (4 indent ) Modulation
695 .... • (5 indent ) Amplitude
696 .... • (5 indent ) Angle (i.e., frequency or phase)
697 .... (4 indent ) Mixing
698 .... • (5 indent ) Partials (i.e., harmonics)
699 .... (4 indent ) Filtering
700 .... • (5 indent ) Variable
701 ... (3 indent ) Expression or special effects
702 .... (4 indent ) Envelope shaping (e.g., attack, decay, sustain, or release, etc.)
703 .... • (5 indent ) Attack and decay
704 .... (4 indent ) Portamento or glissando
705 .... (4 indent ) Tremolo
706 .... (4 indent ) Vibrato
707 .... (4 indent ) Reverberation
708 .... (4 indent ) Chorus, ensemble, or celeste
709 .... (4 indent ) Trill
710 .... (4 indent ) Chiff or percussive transients
711 .... (4 indent ) Loudness control
712 ... (3 indent ) Accompaniment
713 .... (4 indent ) Rhythm
714 .... • (5 indent ) Tempo control
715 .... (4 indent ) Chords
716 .... (4 indent ) Arpeggio
717 .... (4 indent ) Reiteration
718 ... (3 indent ) Constructional details
719 .... (4 indent ) Keyboard
720 .... (4 indent ) Keyswitch structure
721 .... (4 indent ) Foot control
722 ... (3 indent ) Fret control
723 .. (2 indent ) Transducers
724 ... (3 indent ) Photoelectric
725 ... (3 indent ) Electromagnetic
726 .... (4 indent ) String
727 .... • (5 indent ) With adjustable means
728 .... • (5 indent ) Noise reduction (e.g., error prevention, etc.)
729 .... (4 indent ) Reed
730 ... (3 indent ) Piezoelectric
731 .... (4 indent ) String
732 .... (4 indent ) Reed
733 ... (3 indent ) Capacitive
734 ... (3 indent ) Strain gauge
735 ... (3 indent ) Tone synthesis or timbre control
736 .... (4 indent ) Filtering
737 ... (3 indent ) Expression or special effects
738 .... (4 indent ) Envelope shaping (e.g., attack, decay, sustain, or release, etc.)
739 .... (4 indent ) Tremolo
740 .... (4 indent ) Vibrato
741 .... (4 indent ) Loudness control
742 ... (3 indent ) Selecting circuits
743 ... (3 indent ) Constructional details
744 .... (4 indent ) Keyboard
745 .... (4 indent ) Keyswitch structure
746 .... (4 indent ) Foot control
2 .. (2 indent ) Combined
3 .. (2 indent ) Electric
4 ... (3 indent ) With phonograph
5 .... (4 indent ) Electrical connections
6 ... (3 indent ) Pneumatic
7 .. (2 indent ) Stringed
8 ... (3 indent ) With picking devices
9 .... (4 indent ) Electric
10 ... (3 indent ) With bowing devices
11 .... (4 indent ) Electric
12 ... (3 indent ) With striking devices
13 ... (3 indent ) Pianos
14 .... (4 indent ) Without keys
15 .... • (5 indent ) Half width
16 .... (4 indent ) Constant power
17 .... • (5 indent ) Electric control
18 .... • . (6 indent ) Key actuators
19 .... (4 indent ) Electric power
20 .... • (5 indent ) Key actuators
21 .... • . (6 indent ) With expression
22 .... • .. (7 indent ) By voltage change
23 .... • (5 indent ) With expression
24 .... (4 indent ) Pneumatic type
25 .... • (5 indent ) Key actuators
26 .... • (5 indent ) Grands
27 .... • . (6 indent ) Connections to piano action
28 .... • (5 indent ) Action above keyboard
29 .... • (5 indent ) Action below keyboard
30 .... • (5 indent ) Location of parts
31 .... • (5 indent ) With double tracker
32 .... • . (6 indent ) Double length
33 .... • (5 indent ) Expression mechanism
34 .... • . (6 indent ) Parts of piano moved
35 .... • .. (7 indent ) Rest rail shifted
36 .... • ... (8 indent ) Normally in short stroke position
37 .... • ... (8 indent ) Position controlled from reservoir
38 .... • ... (8 indent ) Graduated shift
39 .... • . (6 indent ) Wind pressure varied
40 .... • .. (7 indent ) By pumping
41 .... • .. (7 indent ) By throttling
42 .... • .. (7 indent ) By regulating chamber
43 .... • .. (7 indent ) By use of two pressures
44 .... • . (6 indent ) Two cooperating pneumatics to each note
45 .... • . (6 indent ) Two opposing pneumatics to each note
46 .... • . (6 indent ) Transmission varied
47 .... • . (6 indent ) Systematic variations
48 .... • . (6 indent ) Pneumatic details
49 .... • . (6 indent ) Hand controllers
50 .... • (5 indent ) Pneumatic construction
51 .... • . (6 indent ) Both primaries and secondaries
52 .... • .. (7 indent ) Lower leaf moved
53 .... • . (6 indent ) Lower leaf moved
54 .... • . (6 indent ) Striker pneumatics in wind chest
55 .... • . (6 indent ) Units
56 .... • .. (7 indent ) Metal
57 .... • . (6 indent ) Tubes and junctions
58 .... • . (6 indent ) Bleeds
59 .... • .. (7 indent ) With valve
60 .... • . (6 indent ) Valves and seats
61 .... • .. (7 indent ) Inside
62 .... • .. (7 indent ) Outside
63 .... • ... (8 indent ) Adjustable
64 .... • . (6 indent ) Screening and cleaning
65 .... • (5 indent ) Power pneumatics
66 .... • . (6 indent ) Connections to hammers
67 .... • .. (7 indent ) To key
68 .... • .. (7 indent ) To abstract
69 .... • .. (7 indent ) To wippen
70 .... • (5 indent ) Wind-supply devices
71 .... • . (6 indent ) In grands
72 .... • . (6 indent ) Pedals
73 .... • .. (7 indent ) Folding
74 .... • .. (7 indent ) With keylock
75 .... • .. (7 indent ) With doors
76 .... • ... (8 indent ) Operating together
77 .... • .... (9 indent ) Door-carried pedal
78 .... • .... (9 indent ) Upper panel moved
79 .... • . (6 indent ) Distribution
80 .... • (5 indent ) Key slips
81 .... • (5 indent ) Upper panel
82 .... • (5 indent ) Lower panel
84 ... (3 indent ) Organs
85 .... (4 indent ) Stop actions
86 .... (4 indent ) Cylinder
88 .... (4 indent ) Electropneumatic action
89 .... (4 indent ) Pneumatic action
90 .... • (5 indent ) With keys
91 .... • (5 indent ) Pipe organ
92 ... (3 indent ) Organettes
93 ... (3 indent ) Mouth blown
94.1 .. (2 indent ) Combs
94.2 ... (3 indent ) Combined
95.1 ... (3 indent ) Cylinder type
95.2 .... (4 indent ) Combined
96 .... (4 indent ) Cylinder construction
97 ... (3 indent ) Disk type
98 .... (4 indent ) With star wheels
99 .... (4 indent ) Multiple disks
100 .... (4 indent ) With phonograph spindle
101 ... (3 indent ) Note-sheet type
105 .. (2 indent ) Outside players
106 ... (3 indent ) Cylinder or disk
107 ... (3 indent ) Electric or electropneumatic
108 ... (3 indent ) Cabinet type
109 .... (4 indent ) Case connectors
110 .... (4 indent ) Pneumatic
111 ... (3 indent ) Striker details
112 ... (3 indent ) Constant power
113 .... (4 indent ) Electric control
114 .... (4 indent ) Pneumatic control
115 .. (2 indent ) Selectors
116 ... (3 indent ) Tracker-box location
117 ... (3 indent ) Mechanical fingers
118 ... (3 indent ) Plurality of sheets
119 .... (4 indent ) Synchronized
120 .... (4 indent ) Single tracker
121 ... (3 indent ) Sheet not rolled
122 ... (3 indent ) Winding and rewinding
123 .... (4 indent ) With electric features
124 .... (4 indent ) For two types of rolls
125 .... (4 indent ) Shifting gear and clutch
126 .... (4 indent ) Two clutches
127 .... (4 indent ) Gears
128 .... (4 indent ) Speed control
129 .... • (5 indent ) Roller and disk or cone
130 .... • (5 indent ) By wind supply
131 .... • (5 indent ) Compensation for diameter
132 .... (4 indent ) Feeding
133 .... (4 indent ) Rewinding
134 .... (4 indent ) Brakes
135 .... (4 indent ) Sheet pressers
136 .... (4 indent ) Registration
137 .... • (5 indent ) Movable detector at edge
138 .... • . (6 indent ) Controlling shifter bellows
139 .... • .. (7 indent ) Single detector
140 .... (4 indent ) Extra end holes
141 .... • (5 indent ) Single end hole
142 .... (4 indent ) Extra center holes
143 .... (4 indent ) Flange shifted
144 .... (4 indent ) Hand operated
145 .... (4 indent ) Transposition only
146 ... (3 indent ) Trackers and sheets
147 .... (4 indent ) Electric
148 .... (4 indent ) For organs
149 .... (4 indent ) Vertical
150 .... (4 indent ) Playing on wind and rewind
151 ... (3 indent ) Trackers
152 .... (4 indent ) Double scale
153 .... • (5 indent ) Trackers rigidly connected
154 .... • . (6 indent ) Pivotally mounted
155 .... • . (6 indent ) With slide valves
156 .... (4 indent ) Duct closers
157 .... (4 indent ) Modified for expression
158 .... (4 indent ) Metal
159 .... (4 indent ) Extensible
160 .... (4 indent ) Pneumato-electric
161 ... (3 indent ) Note sheets
162 .... (4 indent ) Ends and joints
163 .... (4 indent ) Overlapping holes
164 .... (4 indent ) With expression and tempo marks
165 .... (4 indent ) With marks for voice
166 .... (4 indent ) With projections
167 .. (2 indent ) Key locks
168 .. (2 indent ) Couplers
169 .. (2 indent ) Indicators
170 . (1 indent ) Combined
171 .. (2 indent ) Electric
172 .. (2 indent ) Piano and organ
173 . (1 indent ) Stringed
174 .. (2 indent ) Pianos
175 ... (3 indent ) Duplex
176 ... (3 indent ) Separable
177 ... (3 indent ) Cases
178 .... (4 indent ) Fall boards and desks
179 .... (4 indent ) Fall boards
180 .... (4 indent ) Music desks or racks
181 .... (4 indent ) Music receptacles
182 .... (4 indent ) Swells
183 .... (4 indent ) Protectors
184 ... (3 indent ) Frames, string plate and sounding boards
185 ... (3 indent ) Frames and string plates
186.1 ... (3 indent ) Frames
186.2 .... (4 indent ) Wrest planks
187 ... (3 indent ) String plates and sounding boards
188 ... (3 indent ) String plates
189 ... (3 indent ) Resonance devices
190 .... (4 indent ) Supports or platforms
191 .... (4 indent ) Insulators
192 .... (4 indent ) Sounding boards
193 .... • (5 indent ) Materials
194 .... • (5 indent ) Multiple
195 .... • (5 indent ) Ribbing
196 .... • (5 indent ) Crowning devices
197 ... (3 indent ) Stringing
198 .... (4 indent ) Auxiliary strings
199 ... (3 indent ) Strings
200 ... (3 indent ) Tuning devices
201 .... (4 indent ) Simple pin
202 .... (4 indent ) Locking devices
203 .... • (5 indent ) Involving two pins
204 .... (4 indent ) Worm gear
205 .... (4 indent ) Direct pull
206 .... (4 indent ) With push piece
207 .... (4 indent ) With lever
208 .... (4 indent ) Transverse pressure
209 ... (3 indent ) Bridges
210 .... (4 indent ) Inverted
211 .... (4 indent ) Agraffes
212 .... (4 indent ) On sounding board
213 .... • (5 indent ) With string holders
214 .... (4 indent ) String clamps or holders
215 .... (4 indent ) Depressing bars
216 ... (3 indent ) Expression devices
217 .... (4 indent ) Dampers lifted
218 .... (4 indent ) Dampers held
219 .... (4 indent ) Pianissimo devices
220 .... • (5 indent ) Curtain type
221 .... • (5 indent ) Hammer stroke shortened
222 .... • . (6 indent ) Lost-motion preventers
223 .... • .. (7 indent ) In grand actions
224 .... (4 indent ) Auxiliary strikers
225 .... (4 indent ) Pedal mechanism
226 .... • (5 indent ) Locks
227 .... • (5 indent ) Spring fulcrum
228 .... • (5 indent ) Bearings
229 .... • (5 indent ) Pedals
230 .... • . (6 indent ) Auxiliary
231 .... • .. (7 indent ) Pedal carried
232 .... • .. (7 indent ) With footrest
233 .... • (5 indent ) Mouse guards
234 ... (3 indent ) Harmonic dampers
235 ... (3 indent ) Couplers
236 ... (3 indent ) Hammers actions
237 .... (4 indent ) Horizontal
238 .... • (5 indent ) Down striking
239 .... • (5 indent ) Grand
240 .... (4 indent ) Upright
241 .... • (5 indent ) Jack serving as retractor
242 .... • (5 indent ) Standard type
243 .... (4 indent ) Details
244 .... • (5 indent ) Power-operated hammers
245 .... • . (6 indent ) Sostenuto
246 .... • . (6 indent ) Electric striker
247 .... • (5 indent ) Jack constantly controlled
248 .... • (5 indent ) Inverted jack
249 .... • (5 indent ) Jointed jack
250 .... • (5 indent ) Action frames
251 .... • (5 indent ) Flanges and joints
252 .... • . (6 indent ) Continuous
253 .... • (5 indent ) Checks
254 .... • (5 indent ) Hammer heads
255 .... • (5 indent ) Damper heads and stems
256 ... (3 indent ) Bowed or violin pianos
257 .... (4 indent ) With belt bow
258 ... (3 indent ) Plectrum
263 .. (2 indent ) Combined
265 ... (3 indent ) Bodies
266 ... (3 indent ) Erard action
267 .. (2 indent ) Guitars
268 .. (2 indent ) Mandolins
269 .. (2 indent ) Banjos
270 ... (3 indent ) Resonance devices
271 .... (4 indent ) Closed back
272 .... (4 indent ) Two rings
273 .... (4 indent ) Mutes
274 .. (2 indent ) Violins
275 ... (3 indent ) Bodies
276 .... (4 indent ) Bass bars
277 .... (4 indent ) Sound posts
278 ... (3 indent ) Combined chin rest and support
279 ... (3 indent ) Chin rests
280 ... (3 indent ) Supports
281 ... (3 indent ) Positioning devices
283 ... (3 indent ) Bow guides
284 .. (2 indent ) Dulcimers
285 .. (2 indent ) Zithers
286 ... (3 indent ) Chord selectors
287 .... (4 indent ) Damper-bar type
288 .... • (5 indent ) Dampers independent
289 .... (4 indent ) Guard-plate type
290 .. (2 indent ) Details
291 ... (3 indent ) Bodies
292 .... (4 indent ) Metal
293 ... (3 indent ) Necks
294 ... (3 indent ) Resonance devices
295 .... (4 indent ) Auxiliary strings
296 .... (4 indent ) With diaphragm
297R ... (3 indent ) Strings and fastenings
298 .... (4 indent ) Guitar bridges
299 .... (4 indent ) Guitar bridges with tailpieces
300 .... (4 indent ) Banjo tailpieces
301 .... (4 indent ) Mandolin tailpieces
302 .... (4 indent ) Violin tailpieces
303 .... (4 indent ) Spools
304 .... (4 indent ) Tuning pegs
305 .... • (5 indent ) Friction increasers
306 .... (4 indent ) Worm gear
297S .... (4 indent ) Strings
307 ... (3 indent ) Bridges
308 .... (4 indent ) Banjo
309 .... (4 indent ) Violin
310 .... (4 indent ) Violin mutes
311 .... • (5 indent ) Attached
312R ... (3 indent ) Tunings
312P .... (4 indent ) Pedal operated steel guitars
313 ... (3 indent ) Tremolo devices
314R ... (3 indent ) Finger boards and frets
314N .... (4 indent ) Nuts
315 ... (3 indent ) Fingering devices
316 .... (4 indent ) For semitone
317 .... (4 indent ) For chords
318 .... • (5 indent ) Capo tastos
319 .... (4 indent ) Stopping fingers or blocks
320 ... (3 indent ) Picking devices
321 .... (4 indent ) Picks on reciprocating carriage
322 .... (4 indent ) Hand or finger picks
323 ... (3 indent ) Hammer mechanism
324 .... (4 indent ) Spring-shank hammer
325 ... (3 indent ) Bowing mechanism
326 .... (4 indent ) With keyboard
327 ... (3 indent ) Instrument supports
328 ... (3 indent ) Arm, hand, or finger rests
329 ... (3 indent ) Article holders
331 .. (2 indent ) Pipe organs
332 ... (3 indent ) Actions
333 .... (4 indent ) Stop chambers
334 .... (4 indent ) Single chamber
335 .... (4 indent ) Pneumatic details
336 .... • (5 indent ) Membrane valve
337 .... (4 indent ) Electric
338 .... (4 indent ) Electropneumatic
339 .... • (5 indent ) Details
.... (4 indent ) Couplers
340 .... • (5 indent ) Pneumatic
341 .... • (5 indent ) Electric
342 .... (4 indent ) Key valves
343 .... (4 indent ) Stop actions
344 .... • (5 indent ) Combination
345 .... • . (6 indent ) Adjustable
346 ... (3 indent ) Swells
347 .... (4 indent ) Electropneumatic
348 ... (3 indent ) Valve tremolos
349 ... (3 indent ) Pipes
350 .... (4 indent ) Reed
351 .. (2 indent ) Reed organs
352 ... (3 indent ) Cases
353 .... (4 indent ) Pedals
354 ... (3 indent ) Folding
355 ... (3 indent ) Wind-supply devices
356 .... (4 indent ) Pressure and exhaust
357 .... (4 indent ) Pedals
358 .... • (5 indent ) Auxiliary
359 .... (4 indent ) Distribution
360 ... (3 indent ) Reed boards
361 .... (4 indent ) With qualifying tubes
362 .... (4 indent ) With resonance chamber
363 ... (3 indent ) Reeds
364 .... (4 indent ) With tuning means
365 ... (3 indent ) Key actions
366 .... (4 indent ) Pedal
367 .... (4 indent ) Pneumatic
368 .... (4 indent ) Pallets
369 ... (3 indent ) Stop actions
370 .... (4 indent ) Combination
371 .... (4 indent ) Celeste
372 ... (3 indent ) Swells
373 ... (3 indent ) Couplers
374 ... (3 indent ) Fan tremolos
375 .. (2 indent ) Minor reed
376R ... (3 indent ) Accordions
376A .... (4 indent ) Attachments, supports and locks
376EA .... (4 indent ) Electronically amplified
376K .... (4 indent ) Keys and keyboards
376SM .... (4 indent ) Shift mechanisms
377 ... (3 indent ) Harmonicas
378 .... (4 indent ) With resonance chambers
379 .... (4 indent ) Supports
380R .. (2 indent ) Wood winds
381 ... (3 indent ) Duplex
382 ... (3 indent ) Clarinets
383R .... (4 indent ) Mouthpieces
383A .... • (5 indent ) Reeds
384 ... (3 indent ) Flutes
385R ... (3 indent ) Saxophones
385A .... (4 indent ) Woodwind supports
385P .... (4 indent ) Pads
386 ... (3 indent ) Pitch-changing devices
380A ... (3 indent ) Double reed
380B ... (3 indent ) Bagpipes
380C ... (3 indent ) Edge tone
387R .. (2 indent ) Brasses
388 ... (3 indent ) Valve type
389 .... (4 indent ) With four valves
390 .... (4 indent ) Rotary movement
391 .... (4 indent ) Helical or sliding movement
392 .... (4 indent ) Piston details
393 .... (4 indent ) With substitute tubes
394 .... (4 indent ) Tuning devices
395 ... (3 indent ) Trombones
396 .... (4 indent ) Tuning devices
397 ... (3 indent ) Drainage
398 ... (3 indent ) Mouthpieces
399 .... (4 indent ) Adjustable
400 ... (3 indent ) Mutes
401 ... (3 indent ) Tremolos
387A ... (3 indent ) Supports
402 . (1 indent ) Rigid vibrators
403 .. (2 indent ) Bars and supports
404 ... (3 indent ) With strikers
405 ... (3 indent ) With electric action
407 ... (3 indent ) With electric action
408 .. (2 indent ) Tongues
410 .. (2 indent ) Resonators
412 .. (2 indent ) Collapsible
413 .. (2 indent ) Cord tighteners
414 .. (2 indent ) Head material
415 .. (2 indent ) Snares
416 ... (3 indent ) Material
417 ... (3 indent ) Inside
418 .. (2 indent ) Tambourines
419 .. (2 indent ) Tympani
421 .. (2 indent ) Supports
411A .. (2 indent ) Unitension
411M .. (2 indent ) Mutes
411P .. (2 indent ) Practice Pads
422.1 . (1 indent ) Drum and cymbal beaters
422.2 .. (2 indent ) Combined
422.3 .. (2 indent ) Hi-hat
422.4 .. (2 indent ) Drumsticks
. (1 indent ) General features
423R .. (2 indent ) Keyboards
424 ... (3 indent ) Plurality of manuals
425 ... (3 indent ) Auxiliary
426 .... (4 indent ) Pedal
427 ... (3 indent ) Plurality of touch plates
428 .... (4 indent ) Whole-tone scale
429 ... (3 indent ) Curved front
430 ... (3 indent ) Key bottoms
431 .... (4 indent ) Folding
432 ... (3 indent ) Key frames adjustable
434 .... (4 indent ) Fulcrums and guides
435 .... (4 indent ) Fulcrums
436 .... (4 indent ) Guides
437 .... (4 indent ) Plating
438 ... (3 indent ) Manufacturing processes
439 ... (3 indent ) Touch regulators
440 .... (4 indent ) Resistance
441 ... (3 indent ) Key holders
423A ... (3 indent ) Uniform
423B ... (3 indent ) Button type
442 .. (2 indent ) Key selectors
443 .. (2 indent ) Chord players
444 ... (3 indent ) Pedal operated
445 .. (2 indent ) Transposers
446 ... (3 indent ) Auxiliary keyboard
447 ... (3 indent ) Keyboard shifted
448 ... (3 indent ) Intermediate parts shifted
449 ... (3 indent ) Sounders shifted
450 .. (2 indent ) Solo attachments
451 .. (2 indent ) Special or enharmonic scales
452R .. (2 indent ) Materials
452P ... (3 indent ) Plastic material
454 . (1 indent ) Tuning devices
455 .. (2 indent ) Strings
456 .. (2 indent ) Pipes and reeds
458 .. (2 indent ) Tools and machines
459 ... (3 indent ) Tuning hammers
460 ... (3 indent ) Felt pickers
461 . (1 indent ) Recording devices
462 .. (2 indent ) Electric
463 .. (2 indent ) Applying expression lines
464R . (1 indent ) Producing color or light effects
464A .. (2 indent ) Lights in Instrument
465 . (1 indent ) Exercising devices
466 .. (2 indent ) For singers
467 .. (2 indent ) For pianists
468 ... (3 indent ) Attached to performer
469 ... (3 indent ) Armrest rail
470R . (1 indent ) Teaching devices
471R .. (2 indent ) Charts or boards
472 ... (3 indent ) Easel type
473 ... (3 indent ) With transposing slide
474 ... (3 indent ) With transposing dial
475 ... (3 indent ) For transcribing
471SR ... (3 indent ) Slide rules
476 .. (2 indent ) Blocks
477R .. (2 indent ) Indicators
478 ... (3 indent ) For keyboard
479R .... (4 indent ) Single position
480 .... • (5 indent ) With transposing slide
481 .... • (5 indent ) Plurality of cards
479A .... • (5 indent ) On keyboard
482 .... (4 indent ) Shiftable
483.1 ... (3 indent ) Tune Sheets
483.2 .... (4 indent ) Notation systems
484 ... (3 indent ) For tempo
485R ... (3 indent ) For fingering
485SR .... (4 indent ) Slide rules
477B ... (3 indent ) Twirling and conducting batons
470P .. (2 indent ) Phonograph recorders
486 . (1 indent ) Leaf turners
487 .. (2 indent ) Motor operated
488 .. (2 indent ) Gravity operated
489 .. (2 indent ) Hand and spring operated arms
.. (2 indent ) Spring-operated arms
490 ... (3 indent ) Plurality of latches
491 .... (4 indent ) Fixed latches
492 .... (4 indent ) Plurality of releasers
493 .... • (5 indent ) Latches and releasers pivoted
494 .... • . (6 indent ) Integral
495 ... (3 indent ) Single latch
496 .... (4 indent ) Fixed latch
497 .... (4 indent ) Sliding latch
498 .... (4 indent ) Escapement
499 .... • (5 indent ) Air operated
500 .. (2 indent ) Single spring arm
501 ... (3 indent ) Latch and releaser integral
502 .. (2 indent ) Player-operated arms
503 ... (3 indent ) Plurality of actuators
504 .... (4 indent ) Plurality of finger pieces
505 .... • (5 indent ) Actuators pivoted
506 .... • (5 indent ) Actuators and finger pieces integral
507 .... (4 indent ) Single finger piece
... (3 indent ) Single actuator
508 .... (4 indent ) Progressive action
509 .... • (5 indent ) Arms and actuator on different axes
510 .... • . (6 indent ) With segmental gear
511 .... (4 indent ) Sliding actuator
512 .... • (5 indent ) With segmental rack
513 .... (4 indent ) Repeating action
514 .... • (5 indent ) Arms and actuator on different axes
515 .... • (5 indent ) Sliding actuator
516 .. (2 indent ) Single arm
517 .. (2 indent ) Single transfer bar
518 ... (3 indent ) With buckling devices
519 ... (3 indent ) With suction devices
520 ... (3 indent ) Leaves prepared
521 .... (4 indent ) With magnetic disks
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
DIG3 FOLDABLE; DETACHABLE; COLLAPSIBLE
DIG4 CHORUS; ENSEMBLE; CELESTE
DIG7 ELECTRIC KEY SWITCH STRUCTURE
DIG12 SIDE; RHYTHM AND PERCUSSION DEVICES
DIG19 LIGHT SENSITIVE RESISTOR
DIG21 MECHANICAL RESONATOR
DIG23 ELECTRONIC GATES FOR TONES
DIG24 PIEZOELECTRICAL TRANSDUCERS
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .