|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 82 | TURNING |
Click here for a printable version of this file |
1.11 | PROCESS OF TURNING |
1.12 | TALKING MACHINE TABLET |
1.2 | RADIALLY MOVING ROTATING TOOL INSIDE BORE |
18 | PATTERN SECTION |
11 | AXIAL PATTERN |
11.1 | Having transverse tool and templet guide |
12 | Pivoted tool rest |
13 | Profiled cutter |
TAPERS |
46 | SEVERING OR CUT-OFF |
47 | Processes |
48 | Automatic and/or triggered control |
49 | Combined with means to sharpen tool(s) |
50 | Combined with means to apply fluid |
51 | Combined with means to heat tool and/or work |
52 | With dust or chip handling |
53 | Including scrap cutting means |
53.1 | Flying cutter type |
54 | Cutting couple straddling work |
55 | With pattern, guide or cam means (noncircular product) |
56 | Plural cutting means (pairs, or pair, plus single) |
57 | Rotary shear pair |
59 | Interrelated means for tool infeed and circumrotation |
60 | Dependent upon reaction to work |
61 | Infeed cam disk rotation geared to tool holder rotation |
65 | Infeed cam plate braked with respect to tool(s) carrier plate |
66 | Orbital cogwheel and fixed detent |
67 | Common gear means |
70 | With means to feed work |
70.1 | Infeed means |
70.2 | With means to circumrotate tool(s) about work |
71 | Fluid means for relative tool actuation |
72 | Gear means for tool actuation |
75 | Bell crank linkage for tool(s) holder |
76 | Resilient means for tool actuation |
78 | Hand crank for tool holder |
79 | Power driven eccentric |
82 | Tool within work |
83 | With means to rotate tool(s) |
84 | Including rotatable cutters supporting work |
85 | Planetating work mandrels |
86 | Pivoted tool carriage |
88 | Eccentric periphery rotary tool |
89 | Means to feed work axially |
90 | Translatable work support carriage |
91 | With tool groove in support roll(s) |
92 | Rotatable tool(s) driven by contact with work |
93 | Axially movable tool support |
97 | Including resilient means urging work against rotary support |
98 | Separate means for plural tools |
99.1 | Spring urged |
100 | Tool adjustment and/or stop |
101 | With means to support and/or rotate work |
102 | With means to feed work |
103 | LATHE FOR PULLEY |
104 | LATHE FOR WHEEL OR AXLE |
106 | LATHE FOR CRANK OR CRANK PIN |
110 | LATHE FOR SCREW CUTTING |
112 | PORTABLE LATHE FOR BRAKE DRUM, DISC, OR SHOE |
113 | PORTABLE LATHE FOR PIPE TURNING |
114 | PORTABLE LATHE FOR PISTON GROOVING |
115 | BENCH LATHE |
117 | LATHE |
118 | With program control |
121 | With tool turret |
122 | Vertical |
123 | Having facing tool fed transverse to work |
124 | With work feeder or remover |
128 | Portable |
129 | Multiple |
130 | Having hollow cutter head |
131 | Revolvable cutter heads |
132 | Carriage feed |
142 | Headstock |
148 | Tailstock |
149 | Bed |
150 | Center |
152 | Attachment |
157 | Tool and work rest |
158 | Tool rest |
159 | Turret type holder (e.g., multiple tools, etc.) |
160 | Quick release tool or holder clamp |
161 | Tool post |
162 | Work rest |
165 | WORK DRIVER |
170 | CENTERER |
171 | DRILL PRESS ATTACHMENT FOR TURNING |
172 | ATTACHMENT FOR CUTTING A VALVE |
173 | MISCELLANEOUS |
CROSS-REFERENCE ART COLLECTIONS | ||
900 | LATHE THERMAL REGULATION |
901 | CHIP REMOVAL |
902 | OIL GROOVING DEVICE |
903 | BALANCING AND CENTERING |
904 | VIBRATING METHOD OR TOOL |
905 | TRANSMISSION ACCESSORY OR CONTROL |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|