This page requires javascipt to function properly
1.12 TALKING MACHINE TABLET
1.2 RADIALLY MOVING ROTATING TOOL INSIDE BORE
1.3 . (1 indent ) Forming non-circular bore
1.4 . (1 indent ) Tool simultaneously moving axially
1.5 .. (2 indent ) Pivoted to tool-carrier
19 . (1 indent ) Cam-controlled cutter
11.1 . (1 indent ) Having transverse tool and templet guide
11.2 .. (2 indent ) With workpiece gauge
11.3 .. (2 indent ) Having electrical actuator
11.4 ... (3 indent ) And hydraulic actuator
11.5 .. (2 indent ) Having hydraulic actuator
12 . (1 indent ) Pivoted tool rest
13 . (1 indent ) Profiled cutter
15 . (1 indent ) Offset work axis
. (1 indent ) Transversely shifted cutter
17 .. (2 indent ) Templet controlled
16 .. (2 indent ) Gear controlled
47 . (1 indent ) Processes
48 . (1 indent ) Automatic and/or triggered control
49 . (1 indent ) Combined with means to sharpen tool(s)
50 . (1 indent ) Combined with means to apply fluid
51 . (1 indent ) Combined with means to heat tool and/or work
52 . (1 indent ) With dust or chip handling
53 . (1 indent ) Including scrap cutting means
53.1 . (1 indent ) Flying cutter type
54 . (1 indent ) Cutting couple straddling work
55 .. (2 indent ) With pattern, guide or cam means (noncircular product)
56 .. (2 indent ) Plural cutting means (pairs, or pair, plus single)
57 .. (2 indent ) Rotary shear pair
58 ... (3 indent ) Tool axes parallel to axis of work rotation
59 . (1 indent ) Interrelated means for tool infeed and circumrotation
60 .. (2 indent ) Dependent upon reaction to work
61 .. (2 indent ) Infeed cam disk rotation geared to tool holder rotation
62 ... (3 indent ) Axial infeed cam
63 ... (3 indent ) Including centrifugal balancing means
64 ... (3 indent ) Scroll plate infeed cam
65 .. (2 indent ) Infeed cam plate braked with respect to tool(s) carrier plate
66 .. (2 indent ) Orbital cogwheel and fixed detent
67 .. (2 indent ) Common gear means
68 ... (3 indent ) Including adjustable means to vary gear speed
69 ... (3 indent ) With manual disconnect lever
70 .. (2 indent ) With means to feed work
70.1 . (1 indent ) Infeed means
70.2 .. (2 indent ) With means to circumrotate tool(s) about work
71 ... (3 indent ) Fluid means for relative tool actuation
72 ... (3 indent ) Gear means for tool actuation
73 .... (4 indent ) Including axial cam
74 .... • (5 indent ) With indicator
75 ... (3 indent ) Bell crank linkage for tool(s) holder
76 ... (3 indent ) Resilient means for tool actuation
77 .... (4 indent ) With means for manual retraction
78 .. (2 indent ) Hand crank for tool holder
79 .. (2 indent ) Power driven eccentric
80 ... (3 indent ) Fluid motor
81 ... (3 indent ) Plural tools
82 .. (2 indent ) Tool within work
83 .. (2 indent ) With means to rotate tool(s)
84 ... (3 indent ) Including rotatable cutters supporting work
85 ... (3 indent ) Planetating work mandrels
86 ... (3 indent ) Pivoted tool carriage
87 .... (4 indent ) With adjustable work stops
88 ... (3 indent ) Eccentric periphery rotary tool
89 ... (3 indent ) Means to feed work axially
90 ... (3 indent ) Translatable work support carriage
91 ... (3 indent ) With tool groove in support roll(s)
92 .. (2 indent ) Rotatable tool(s) driven by contact with work
93 ... (3 indent ) Axially movable tool support
94 .... (4 indent ) Freely floating parallel to axis
95 .... • (5 indent ) With supplemental nonrotative tool
96 .... (4 indent ) Including clutch control for work rotation
97 ... (3 indent ) Including resilient means urging work against rotary support
98 .. (2 indent ) Separate means for plural tools
99.1 .. (2 indent ) Spring urged
99.2 ... (3 indent ) For window shade
100 .. (2 indent ) Tool adjustment and/or stop
101 .. (2 indent ) With means to support and/or rotate work
102 .. (2 indent ) With means to feed work
104 LATHE FOR WHEEL OR AXLE
105 . (1 indent ) In situ lathe for railroad wheel
106 LATHE FOR CRANK OR CRANK PIN
107 . (1 indent ) Portable lathe for crank pin
108 . (1 indent ) Having work oscillator
109 .. (2 indent ) Having work driver
110 LATHE FOR SCREW CUTTING
111 . (1 indent ) Having swinging feed nut and tool bar
112 PORTABLE LATHE FOR BRAKE DRUM, DISC, OR SHOE
113 PORTABLE LATHE FOR PIPE TURNING
114 PORTABLE LATHE FOR PISTON GROOVING
116 . (1 indent ) Watchmaker's lathe
118 . (1 indent ) With program control
119 .. (2 indent ) And transmission
120 .. (2 indent ) And tool turret
121 . (1 indent ) With tool turret
122 . (1 indent ) Vertical
123 . (1 indent ) Having facing tool fed transverse to work
124 . (1 indent ) With work feeder or remover
125 .. (2 indent ) Magazine type
126 ... (3 indent ) Bar feeder
127 .. (2 indent ) Bar feeder
128 . (1 indent ) Portable
129 . (1 indent ) Multiple
130 . (1 indent ) Having hollow cutter head
131 . (1 indent ) Revolvable cutter heads
132 . (1 indent ) Carriage feed
133 .. (2 indent ) Control
134 ... (3 indent ) Electrical type
135 .. (2 indent ) Apron mechanism
136 ... (3 indent ) Feednut control
137 .. (2 indent ) Slide rest
138 ... (3 indent ) Multiple tool support
139 ... (3 indent ) Tool relief
140 .. (2 indent ) Change gears
141 .. (2 indent ) Feedscrews and rods
142 . (1 indent ) Headstock
143 .. (2 indent ) Speed changing gear
144 ... (3 indent ) Speed change gears for maintaining constant cutting speed
145 .. (2 indent ) Spindle reverser
146 .. (2 indent ) Spindle or work angler
147 .. (2 indent ) Spindle and bearings
148 . (1 indent ) Tailstock
151 .. (2 indent ) Alignment adjuster
152 . (1 indent ) Attachment
153 .. (2 indent ) Stop (e.g., carriage, tool, work, etc.)
154 ... (3 indent ) Tool slide
155 ... (3 indent ) Collet or spindle
156 ... (3 indent ) Indexible (e.g., roll type, etc.)
157 . (1 indent ) Tool and work rest
158 . (1 indent ) Tool rest
159 .. (2 indent ) Turret type holder (e.g., multiple tools, etc.)
160 .. (2 indent ) Quick release tool or holder clamp
161 .. (2 indent ) Tool post
162 . (1 indent ) Work rest
163 .. (2 indent ) With noise or vibration dampener
164 .. (2 indent ) Center rest
166 . (1 indent ) Lathe dog
167 .. (2 indent ) Cam grip
168 . (1 indent ) Mandrel
169 .. (2 indent ) Expansible
171 DRILL PRESS ATTACHMENT FOR TURNING
172 ATTACHMENT FOR CUTTING A VALVE
900 LATHE THERMAL REGULATION
903 BALANCING AND CENTERING
904 VIBRATING METHOD OR TOOL
905 TRANSMISSION ACCESSORY OR CONTROL
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .