Class   81	TOOLS
	Click here to view a PDF version of this file

2

COMBINED WRENCHES AND PUMPS OR OILERS

3.05

SHELL, PROJECTILE, OR WAD EXTRACTORS

3.07

RECEPTACLE CLOSURE REMOVER

3.08

. (1 indent ) Having discrete retainer or receptacle for removed closure

3.09

. (1 indent ) Combined or plural

3.15

.. (2 indent ) Attached to receptacle or closure

3.2

. (1 indent ) Power-, vacuum-, or fluid pressure-operated

3.25

. (1 indent ) Wall or surface mounted or supported

3.31

.. (2 indent ) With receptacle supporting or grasping means

3.32

... (3 indent ) With bottom support

3.33

.. (2 indent ) Rotary remover device, gear or lever actuated

3.27

.. (2 indent ) Lever or prying type

3.35

. (1 indent ) Movable into or over handle

3.36

. (1 indent ) With additional receptacle-engaging means

3.37

.. (2 indent ) Lever- or gear-translated closure remover

3.29

.. (2 indent ) For engaging receptacle about closure (e.g., socket type)

3.39

.. (2 indent ) Bottom support

3.4

. (1 indent ) Gripping type

3.41

.. (2 indent ) Finger grapple type

3.42

.. (2 indent ) With reciprocating closure-engaging

3.43

.. (2 indent ) With deformable strip-tightening means

3.44

.. (2 indent ) With pivoted closure-engaging parts

3.45

. (1 indent ) Screw type

3.55

. (1 indent ) Levering or prying type

3.47

.. (2 indent ) With impaling or inserting remover

3.56

.. (2 indent ) Having discrete relatively movable portions

3.57

.. (2 indent ) Having handle, intermediate hook, and end fulcrum

3.48

. (1 indent ) Impaling or inserting type

3.49

.. (2 indent ) With lateral projection or abutment

3.5

SPECTACLE

3.6

. (1 indent ) Plier

3.7

LEAF-SPRING SPREADERS

3.8

FUSE PULLERS

4

ENGRAVERS' CLAMPS

6

WATCHMAKERS'

7

. (1 indent ) Jewel setters'

7.5

. (1 indent ) Mainspring winders

8

. (1 indent ) Ruby pin setters

8.1

PACKING

9.2

STYLUS

9.21

STAMP SCARIFIER

9.22

PERFORATOR AND INKER

9.24

TAPPET ADJUSTER

9.26

PLOWSHARE HOLDER

9.3

HOSE-CLAMP APPLIERS

9.4

WIRE STRIPPER

9.51

. (1 indent ) Bench tools

9.41

. (1 indent ) Having relatively movable clamp and blade

9.42

.. (2 indent ) Clamp and blade move relative to supporting structure

9.43

.. (2 indent ) Blade moves relative to handle to remove insulation

9.44

. (1 indent ) Pivoted blade

10

NUT LOCK

13

BOLT HOLDERS

15.2

REPAIR TOOLS FOR RESILIENT TIRES

15.3

. (1 indent ) Holders for spread tire casings

15.4

. (1 indent ) Deflating tools

15.5

. (1 indent ) Combined cement injectors and plug or patch inserters

15.6

. (1 indent ) Cement injectors

15.7

. (1 indent ) Plug or patch inserters

15.8

SKID CHAIN APPLYING TOOLS

15.9

FOR LOCK OR LATCH

16

CHUCK KEY

44

HOLDER, PUSHER, OR SETTER FOR DRIVEN-TYPE FASTENERS

45

SHINGLE TOOL

46

WOODEN FLOORING TOOL

300

TOOL JAW(S) POSITIONED BY RELATIVELY MOVABLE PLURAL HANDLES (E.G., PLIERS)

301

. (1 indent ) Including hydraulic features

302

. (1 indent ) Antipodal jaw surfaces move apart as handles approach (e.g., outwardly expanding jaws)

303

. (1 indent ) With three or more jaws

304

.. (2 indent ) With single pair of handles

305

... (3 indent ) Double pair Janus-jawed

306

.... (4 indent ) With jaws fixed to handle(s)

307

... (3 indent ) With intermediate jaw(s) in line with and between outer jaws

308

... (3 indent ) With three jaws only

309

.... (4 indent ) Two pivoted jaws and one sliding jaw

310

.... (4 indent ) Three coacting pivoted jaws

311

... (3 indent ) With separate jaw pairs

312

.... (4 indent ) Parallel jaws perpendicularly spaced

313

. (1 indent ) With means requiring a completion of travel of jaw movement

314

. (1 indent ) With means for step-by-step jaw movement

315

. (1 indent ) With means to immobilize handles against relative angular movement and means to move jaw(s) thereafter

316

.. (2 indent ) With plural selective handle positions

317

.. (2 indent ) With means for relative longitudinal handle movement

318

. (1 indent ) With means to immobilize jaws

319

.. (2 indent ) With lock-release means

320

.. (2 indent ) With lock-disabling means

321

.. (2 indent ) Including spring-urged handles or jaws

322

... (3 indent ) And spring-urged latch

323

.. (2 indent ) Spring-urged latch element(s)

324

.. (2 indent ) Positive lock means

325

... (3 indent ) With plural selective jaw positions

326

.... (4 indent ) Threaded lock means

327

....• (5 indent ) With threaded jaw adjustment means

328

.... (4 indent ) Interdigitated lock means

329

. (1 indent ) With means (nontoggle) to hold jaws against only retrograde movement

330

.. (2 indent ) With plural preselective jaw positions

331

.. (2 indent ) Manipulated lock member

332

... (3 indent ) Pivoted bail

333

... (3 indent ) Sliding yoke

334

... (3 indent ) Threaded member

335

.... (4 indent ) Nut

336

... (3 indent ) Pivoted rack

337

... (3 indent ) Pivoted pawl

338

.. (2 indent ) Rack and pawl means

339

.. (2 indent ) Coacting friction means

340

... (3 indent ) Serrated surfaces

341

. (1 indent ) With means to vary range limit(s) of jaw movement

342

. (1 indent ) Jaw-actuating means (handle-manipulation conversion)

343

.. (2 indent ) With means to choose one of a plurality of actuator leverages

344

... (3 indent ) Predetermined and discrete member of leverage selections

345

.. (2 indent ) Axial motion of handle-attached actuators(s)

346

.. (2 indent ) Pivotal motion about axis of parallel actuator rod(s)

347

.. (2 indent ) With means to articulate and/or slide both jaws

348

... (3 indent ) With means for arcuate motion of both jaws

349

.... (4 indent ) Cam actuator

350

.... (4 indent ) Dual pivoted actuator levers

351

....• (5 indent ) With jaws pivoted together

352

... (3 indent ) With means for parallel movement of work-engaging surfaces

353

.... (4 indent ) Longitudinal guide means

354

.... (4 indent ) Lateral guide means

355

.. (2 indent ) With means for sliding jaw actuation

356

... (3 indent ) With adjustment means

357

.... (4 indent ) Pivoted pawl type

358

... (3 indent ) Pinion and rack

359

... (3 indent ) Claw lever and rack or notch

360

.... (4 indent ) Plural teeth on claw

361

... (3 indent ) Grip lever and cam

362

... (3 indent ) Grip lever and link

363

.... (4 indent ) Toggle link

364

.. (2 indent ) Including claw lever and rack or notch means

365

... (3 indent ) With adjustment means

366

... (3 indent ) Plural teeth on claw

367

.. (2 indent ) Including toggle means

368

... (3 indent ) With toggle release

369

.... (4 indent ) By means acting on intermediate pivot

370

....• (5 indent ) Release means carried by grip lever

371

....•. (6 indent ) Mounted on intermediate pivot

372

... (3 indent ) With means to limit movement of intermediate pivot

373

... (3 indent ) With means for relative parallel movement of jaws

374

... (3 indent ) With pitman between grip lever and intermediate pivot

375

... (3 indent ) With toggle linkage and actuated jaw mounted on carrier

376

... (3 indent ) With connecting rod between grip lever and actuated jaw

377

... (3 indent ) With connecting rod between grip lever and handle member

378

.... (4 indent ) With actuated jaw pivoted on handle member

379

....• (5 indent ) With means for resiliently biasing jaw and/or toggle

380

....•. (6 indent ) Extension coil spring between jaw and handle member

381

.. (2 indent ) Including grip lever actuator and pivoted jaw (e.g., tandem levers)

382

... (3 indent ) With adjustment means

383

... (3 indent ) With link connecting jaw and grip lever

383.5

.. (2 indent ) Including cam actuator and pivoted jaw

384

.. (2 indent ) With adjustment means

385

. (1 indent ) Adjustable relationship between jaw(s) and/or handle(s)

386

.. (2 indent ) By relative positioning of jaw(s) only

387

... (3 indent ) Both jaws adjustable

388

... (3 indent ) By threaded elements

389

.... (4 indent ) Rotatable screw type

390

.... (4 indent ) Rotatable nut type

391

... (3 indent ) Maintained by detent and rack

392

... (3 indent ) Maintained by locked interdigitated members

393

.. (2 indent ) By angular orientation of one handle portion relative to other

394

.. (2 indent ) By selection of pivot hole(s) in each handle

395

.. (2 indent ) By threaded adjustment means

396

... (3 indent ) Worm and rack type

397

... (3 indent ) Peripherally threaded handle manipulated for travel relative to other handle

398

... (3 indent ) Threaded element travels relative to both handles

399

... (3 indent ) Rotatable screw in nut

400

.... (4 indent ) Screw attached to joint

401

.... (4 indent ) Nut attached to joint

402

... (3 indent ) Rotatable nut on screw

403

.... (4 indent ) Screw attached to joint

404

.... (4 indent ) Nut attached to joint

405

.. (2 indent ) By manipulation of pivot-carrying member

406

... (3 indent ) With angular orientation of eccentric pivots joining handles

407

.. (2 indent ) By relative sliding or slipping of handles

408

... (3 indent ) With fulcrum-carrying member

409

.... (4 indent ) With positive lock for member

409.5

.... (4 indent ) With spring urged lock for member

411

... (3 indent ) With pivot pin fulcrum in notched slot

412

.... (4 indent ) With flattened cross section pin

413

... (3 indent ) With toothed-member fulcrum on notched handle

414

... (3 indent ) With opposed interdigitated concentric segmental annular portions

415

. (1 indent ) Crossed handles

416

.. (2 indent ) Joint detail

417

.. (2 indent ) Resiliently urged

418

. (1 indent ) Jaw features

419

.. (2 indent ) Tined or digitated jaws

420

.. (2 indent ) Jaws extend laterally beyond side edge plane of handle(s)

421

.. (2 indent ) Jaw attachment and/or inserts

422

... (3 indent ) Selective

423

.... (4 indent ) By detachment

424

... (3 indent ) Articulated

424.5

.. (2 indent ) Nonplanar jaw face

426

... (3 indent ) And diversely shaped face

426.5

... (3 indent ) Work conforming face

427

. (1 indent ) Resiliently urged

427.5

. (1 indent ) Handle

463

INCLUDING TOOL DRIVING BY IMPACT DELIVERING COMPONENT OR COOPERATING ANVIL

464

. (1 indent ) Motor or gear driven

465

. (1 indent ) Structurally constrained to arcuate movement

466

.. (2 indent ) About turning axis of work engaging portion

52

WRENCH, SCREWDRIVER, OR DRIVER THEREFOR

53.1

. (1 indent ) With elongated hot line stick

53.11

.. (2 indent ) Globe manipulator

53.12

... (3 indent ) Rotatable grasper

53.2

. (1 indent ) Stud-removal and implacement

429

. (1 indent ) Responsive to movement of work

467

. (1 indent ) Responsive to torque on work

468

.. (2 indent ) With marking mechanism

469

.. (2 indent ) Means for regulating motor

470

... (3 indent ) Fluid motor

471

.. (2 indent ) Permanently deformable component

472

.. (2 indent ) Relatively movable work contacting components

473

.. (2 indent ) Rotatable, coaxial, clutching components

474

... (3 indent ) Having intermediate, disparate, interlock element

475

... (3 indent ) Having complementary formations

476

... (3 indent ) Having friction type contact surfaces

477

.. (2 indent ) Work engaging portion attached to and turned by resilient member

478

.. (2 indent ) Work engaging portion pivotally or rotatably connected to handle

479

... (3 indent ) With electric signal device

480

... (3 indent ) Axis of connection coaxial to rotational axis of work

481

.... (4 indent ) With arm extending from portion

482

.... (4 indent ) With pivoted locking pawl

483

... (3 indent ) With arm extending from portion and through connection

54

. (1 indent ) Machine

55

.. (2 indent ) Bolt-holding

56

... (3 indent ) Gear-operated

57

.. (2 indent ) Gear-operated

57.11

... (3 indent ) With motor

57.12

.... (4 indent ) Oblique angle drive

57.13

.... (4 indent ) Right angle drive

57.14

.... (4 indent ) Parallel axis drive

57.15

... (3 indent ) Round work

57.16

.... (4 indent ) With additional work-engaging means

57.17

.... (4 indent ) Flexible jaw

57.18

.... (4 indent ) Cam-operated jaw

57.19

.... (4 indent ) Fluid-operated jaw

57.2

.... (4 indent ) Pivoted jaw

57.21

.... (4 indent ) Sliding jaw

57.22

... (3 indent ) Multiple drive or driven means

57.23

.... (4 indent ) With magazine

57.24

... (3 indent ) With support

57.25

.... (4 indent ) Vehicular

57.26

... (3 indent ) Adjustable angle drive

57.27

.... (4 indent ) Flexible shaft

57.28

... (3 indent ) Oblique angle drive

57.29

... (3 indent ) Right angle drive

57.3

... (3 indent ) Parallel axis drive

57.31

... (3 indent ) Common axis drive

57.32

.. (2 indent ) Double or duplex

57.33

.. (2 indent ) Round work

57.34

... (3 indent ) With additional work-engaging means

57.35

... (3 indent ) With support

57.36

.. (2 indent ) Multiple work-engaging means

57.37

.. (2 indent ) With feed or magazine means

430

... (3 indent ) Utilizing fluid to convey work

431

... (3 indent ) Including chute having longitudinal axis collinear with rotational axis of work turning portion

432

... (3 indent ) Including vibratory work supporting member

433

... (3 indent ) Including revolvably driven work contacting member

434

... (3 indent ) Including driven, flexible, work supporting strip

435

... (3 indent ) Including driven, reciprocating, conveying member

57.38

.. (2 indent ) With tensioning means

57.39

.. (2 indent ) Step by step

57.4

.. (2 indent ) With support

57.41

... (3 indent ) Vehicular

57.42

.. (2 indent ) Direct drive

57.43

... (3 indent ) Flexible

57.44

... (3 indent ) Fluid

57.45

... (3 indent ) Oblique angle

57.46

... (3 indent ) Tangential engagement

57.5

. (1 indent ) Turret head

74

. (1 indent ) Wheel or endless track operated

75

.. (2 indent ) Hub-rim grasp

76

... (3 indent ) Internal

58

. (1 indent ) Handle clutched to head

58.1

.. (2 indent ) With additional head-turning means

58.2

.. (2 indent ) Radially slotted or open end head

58.3

.. (2 indent ) Axially movable clutching parts

58.4

.. (2 indent ) Positive two-way drive (e.g., dog clutch)

58.5

.. (2 indent ) Radially extending eccentrically movable handle

59.1

.. (2 indent ) Ball or roller wedge

60

.. (2 indent ) One-way detent drive, e.g., ratchet

61

... (3 indent ) Pivoted pawl

62

.... (4 indent ) Reversing

63

....• (5 indent ) Single

63.1

... (3 indent ) Reversing

63.2

.... (4 indent ) Single pawl

436

. (1 indent ) Having work engaging and force exerting portion inserted into cavity (e.g., allen wrench, screwdriver)

437

.. (2 indent ) Combined with or usable as diverse-type wrench

438

.. (2 indent ) Having structure adapting portion or tool for separation

439

.. (2 indent ) Including discrete, separately usable inserted portions

440

... (3 indent ) Pivotally or rotatably mounted

441

.. (2 indent ) Inserted portion cuts into or deforms cavity

442

.. (2 indent ) Inserted portion having relatively movable components

443

... (3 indent ) Having camming or wedging element for moving components

444

.... (4 indent ) Axially shiftable element located between and wedging against components

445

....• (5 indent ) With threaded surface for cooperating with mating tool structure

446

.... (4 indent ) Rotatable element located between and camming against components

447

... (3 indent ) Having cooperating threaded element type actuating means

448

... (3 indent ) Having resilient or spring biased component

449

.... (4 indent ) Biased component rotated about axis collinear to rotational axis of tool

450

.. (2 indent ) Inserted portion mounted to pivot or swivel relative to longitudinal axis of handle

451

.. (2 indent ) With separate means for guiding or gripping work

452

... (3 indent ) Having resilient, relatively movable, work gripping members

453

.... (4 indent ) With camming or wedging element for moving members

454

... (3 indent ) Having pivoted, relatively movable, work gripping members

455

.... (4 indent ) With camming or wedging element for moving members

456

... (3 indent ) Having member with work underlying portion

457

.... (4 indent ) Member spring biased for axial movement

458

.... (4 indent ) Resilient member

459

.. (2 indent ) Inserted portion having threaded periphery

460

.. (2 indent ) Inserted portion having plural, noncollinear blades (e.g., Phillips)

461

.. (2 indent ) Inserted portion having plural, separate, work-engaging projections

64

. (1 indent ) Flexible

65

.. (2 indent ) Threaded adjustment

65.2

.. (2 indent ) Link

68

... (3 indent ) Handle jaw

69

.... (4 indent ) Pivoted

70

.... (4 indent ) Duplex

65.4

... (3 indent ) Toothed adjustment

73

. (1 indent ) U-crank arm

77

. (1 indent ) Double-ended, simultaneous adjustment

90.1

. (1 indent ) Plural pivoted jaws and handle-lever

90.2

.. (2 indent ) Cam or gear operated

90.3

.. (2 indent ) Jaws enclose work

90.4

... (3 indent ) Including latch to connect jaw to handle-lever

90.5

.... (4 indent ) At least three jaws enclose work

90.6

... (3 indent ) Including latch to connect pivoted jaws

90.7

.... (4 indent ) At least three jaws enclose work

90.8

....• (5 indent ) Two jaw pairs connected by latch

90.9

.. (2 indent ) Including means to adjust or to secure jaw in adjusted position

91.1

.. (2 indent ) Slidable pivot

91.2

.. (2 indent ) First jaw pivoted directly to handle and to second jaw

91.3

.. (2 indent ) Two jaws pivoted directly to intermediate member

92

. (1 indent ) Pivoted inner jaw

93

.. (2 indent ) Nut or screw fulcrum

94

.. (2 indent ) Pin fulcrum

95

... (3 indent ) Roller jaw

96

.... (4 indent ) Pinion

97

... (3 indent ) Spring-pressed

. (1 indent ) Pivoted outer jaw

.. (2 indent ) Fixed fulcrum

98

... (3 indent ) Nontraveling jaw

99

.... (4 indent ) Spring-pressed

100

... (3 indent ) Traveling jaw

101

.... (4 indent ) Nut fulcrum

102

.... (4 indent ) Rocking sleeve

103

....• (5 indent ) Spring-pressed

104

....•. (6 indent ) Fulcrum washer

105

....•. (6 indent ) Sleeve-enclosed nut

106

.. (2 indent ) Traveling fulcrum

107

... (3 indent ) Threaded handlebar

108

.... (4 indent ) Axillary rotating

109

... (3 indent ) Slotted guide

110

... (3 indent ) Fulcrum tooth and rack

111

. (1 indent ) Pivoted side jaw

112

.. (2 indent ) Bevel-closing

113

... (3 indent ) Cammed into socket by axial nut or screw

114

.... (4 indent ) Sleeve socket nut

115

... (3 indent ) Rotating ring

116

... (3 indent ) Wedge

117

.. (2 indent ) Rocking link

118

.. (2 indent ) Transverse screw clamp

126

. (1 indent ) Sliding jaw, handle-lever grip

127

.. (2 indent ) Claw

128

. (1 indent ) Sliding jaw, cam-closing

129

. (1 indent ) Slidable jaw adjustments

129.5

.. (2 indent ) Rack

131

... (3 indent ) Interlocking jaw handles

132

... (3 indent ) Locking set screw or nut

133

... (3 indent ) Pinion lock

134

... (3 indent ) Pivoted rack catch

135

.... (4 indent ) Nontraveling

136

....• (5 indent ) Intermediate fulcrum

137

.... (4 indent ) Transverse

138

.... (4 indent ) Cam-seated

139

.... (4 indent ) Indirectly operated

140

.... (4 indent ) Intermediate fulcrum

141

... (3 indent ) Shank-engaged cam

142

... (3 indent ) Sliding rack catch

143

.... (4 indent ) Cam-seated

144

.... (4 indent ) Screw- or nut-seated

145

.... (4 indent ) Spring-seated

146

... (3 indent ) Spring-seated jaw frame

147

.... (4 indent ) Integral frame and teeth

148

... (3 indent ) Wedge lock

149

.... (4 indent ) Wedge pusher

150

.. (2 indent ) Shank grip

151

... (3 indent ) Side jaw

152

... (3 indent ) Clutch yoke

153

... (3 indent ) Roller clutch

154

... (3 indent ) Locking incline

155

.. (2 indent ) Thread

156

... (3 indent ) Displaceable half nut

157

... (3 indent ) Displaceable nut or screw

158

.... (4 indent ) Traveling screw, shank rack

159

... (3 indent ) Interrupted

160

.... (4 indent ) Nut set

161

....• (5 indent ) Traveling nut

162

.... (4 indent ) Traveling screw, shank rack

163

... (3 indent ) Right and left threads

164

... (3 indent ) Rotatable threaded handle shank

165

... (3 indent ) Sliding side jaw

... (3 indent ) Nontraveling rotatable nut

166

.... (4 indent ) Intermediate

167

....• (5 indent ) Causing outer jaw to slide

168

.... (4 indent ) Terminal

169

....• (5 indent ) Causing outer jaw to slide

170

... (3 indent ) Nontraveling rotatable screw

171

.... (4 indent ) Bracket-bearing

172

.... (4 indent ) Spiral groove engaged by slidable actuator

173

... (3 indent ) Traveling and rotating nut

174

.... (4 indent ) Threaded handlebar

175

... (3 indent ) Traveling and rotating screw

176

.... (4 indent ) Shank rack

176.1

. (1 indent ) Spanner

176.15

.. (2 indent ) Having means to engage work axially

176.2

... (3 indent ) And means to engage peripheral face of work

176.3

.. (2 indent ) Having relatively movable jaws

119

. (1 indent ) Rigid jaws

120

.. (2 indent ) Round work

121.1

.. (2 indent ) Enclosed (e.g., socket)

122

... (3 indent ) Watch and clock keys

123

.... (4 indent ) Dust protectors

124.1

... (3 indent ) With nut ejectors

125

... (3 indent ) Work-holding

124.2

... (3 indent ) Slotted socket

124.3

... (3 indent ) Through socket and perpendicular handle

124.4

... (3 indent ) Plural sockets

124.5

.... (4 indent ) Slidably or pivotally connected to handle or each other

124.6

... (3 indent ) Having axial opening for removable handle

124.7

... (3 indent ) Having perpendicular handle

125.1

.. (2 indent ) Double-ended

177.1

. (1 indent ) Handle or shank

177.8

.. (2 indent ) Angularly adjustable handle

177.9

... (3 indent ) With yieldable one-way detent

177.2

.. (2 indent ) Extensible handle or handle extension

177.3

.. (2 indent ) Having finger opening

177.4

.. (2 indent ) Having means to store parts

177.5

.. (2 indent ) Having terminal cross arm

177.6

.. (2 indent ) Foldable or flexible

177.7

.. (2 indent ) Having pivoted handle section

177.75

... (3 indent ) Universal joint

177.85

.. (2 indent ) Including socket and boss type connecting means

178

. (1 indent ) Reversible jaws

179

. (1 indent ) Sliding jaw face

462

. (1 indent ) Having stationary structure for supporting wrench or screwdriver

180.1

. (1 indent ) Attachment, or including adjunct or replaceable portion

181

.. (2 indent ) Cutters

182

... (3 indent ) Rotary

183

.. (2 indent ) Roller clutch

184

.. (2 indent ) Shank-embracing

185

.. (2 indent ) Socket reducers

185.1

.. (2 indent ) Removable jaw face

185.2

.. (2 indent ) Movably mounted

186

. (1 indent ) Jaw faces

19

DEFORMABLE HEAD MALLET

20

HAMMER

21

. (1 indent ) Having work protector surrounding face

22

. (1 indent ) Having shock absorbing means

23

. (1 indent ) Having nail placer

24

.. (2 indent ) Magnetic

25

. (1 indent ) Having replaceable striking face

26

. (1 indent ) Having plural striking faces

27

. (1 indent ) Rod encircling type

28

BIT STOCK HAVING MANUAL DRIVE MEANS (E.G.,BRACE)

29

. (1 indent ) Having ratchet mechanism

30

.. (2 indent ) Straight crank arm

31

.. (2 indent ) Adjustable pawl

32

.. (2 indent ) Pivoted pawl

33

.. (2 indent ) Sliding pawl

34

. (1 indent ) Straight stock having side driving gear

35

. (1 indent ) Having U-shaped crank arm

36

.. (2 indent ) Speeding gear

37

.. (2 indent ) Bit shaft inclined relative to crank

484

FOR ADJUSTING VARIABLE POSITIONED PARTS

485

SPREADER

486

RESILIENT ARTICLE TENSIONER OR COMPRESSOR

489

HANDLE FOR TOOL

490

. (1 indent ) Having storage compartment

491

. (1 indent ) Having discrete relatively movable tool clamp

492

. (1 indent ) Having cap or reinforcing means

487

HAND HELD HOLDER OR HAVING CLAMP

488

MISCELLANEOUS

	CROSS-REFERENCE ART COLLECTIONS

900

WRENCH OR SCREWDRIVER CONSTRUCTED FROM SPECIFIC MATERIAL

901

WRENCH OR SCREWDRIVER ADAPTED TO TURN EYE SCREW

	FOREIGN ART COLLECTIONS

FOR000

CLASS-RELATED FOREIGN DOCUMENTS

	DIGESTS

DIG1

TOOL-SUPPORT ADJUNCTS

DIG2

SPIRAL DRIVE FOR WRENCHES

DIG3

WRENCHES, THREAD-ADJUSTMENT LOCK

DIG4

DOUBLE ADJUSTMENTS, SLIDING JAW

DIG5

WRENCH SCALES AND INDICIA

DIG6

SPRING MEANS BIASING WRENCH JAWS

DIG7

BICYCLE SPOKE OR NIPPLE WRENCH

DIG8

CROWFOOT-TYPE WRENCHES

DIG9

PIVOTED JAW LATCH MEANS

DIG10

IRIS-TYPE WRENCH HEAD

DIG11

ADAPTERS FOR DIFFERENT-SIZED FASTENERS

DIG12

POWER HAMMER

   Note: Some content linked to on this page may require a plug-in for Adobe Acrobat Reader.

This file produced by USPTO - SIRA - Office of Patent Automation - ReferenceTools Project. Questions or comments relating to this file should be directed to Patent Automation Feedback.