This page requires javascipt to function properly
1 WASTE RECLAIMING APPARATUS
4 . (1 indent ) Convertible
5R . (1 indent ) With gas, steam or mist treating
6 .. (2 indent ) Static devices
7 ... (3 indent ) With fabric carrying cylinder
8 .. (2 indent ) Textile on cylinder
5A .. (2 indent ) Limited area application
5B .. (2 indent ) Relative movement of applicator and textile
5C .. (2 indent ) In chamber
5D .. (2 indent ) Continuous textile feed and discharge
5E .. (2 indent ) With chamber seal
9 . (1 indent ) With successive fluids and plural tubs
10 .. (2 indent ) Relatively transferable textile holder
11 . (1 indent ) Plural tubs and relatively transferable textile worker
12.01 . (1 indent ) Single tub and automatic sequential operation mechanism
12.02 .. (2 indent ) Sequence control means responsive to a sensed condition
12.03 ... (3 indent ) Temperature of the load
12.04 ... (3 indent ) Weight of the load
12.05 ... (3 indent ) Liquid level
12.06 ... (3 indent ) Unbalanced load
12.07 .. (2 indent ) Dyer
12.08 .. (2 indent ) Dry cleaner
12.09 ... (3 indent ) With cooling means
12.11 .. (2 indent ) Pneumatically actuated
12.12 .. (2 indent ) Special cycle specified (e.g., prewash cycle, permanent press cycle, etc.)
12.13 .. (2 indent ) With treating liquid filtering or reclaiming means
12.14 .. (2 indent ) Dewatering detail
12.15 ... (3 indent ) With heating means
12.16 .. (2 indent ) Motor control circuitry detail
12.17 ... (3 indent ) Relay
12.18 .. (2 indent ) With additive dispensing
12.19 .. (2 indent ) Liquid handling
12.21 ... (3 indent ) Level or temperature responsive
12.22 .... (4 indent ) With temperature modification
12.23 .. (2 indent ) Sequence controller detail
12.24 .. (2 indent ) Clutch detail or transmission detail
12.25 ... (3 indent ) With delay detail
12.26 .. (2 indent ) Door safety latch detail
12.27 .. (2 indent ) Indicator or sensor detail
13R . (1 indent ) Combined
14 .. (2 indent ) With scrub-board
15 .. (2 indent ) With tank heater
16 ... (3 indent ) Tumbler drum
17R .. (2 indent ) With soap supply
17A ... (3 indent ) Dispenser on agitator
18R .. (2 indent ) With solvent recovery
18C ... (3 indent ) Using condenser
18D ... (3 indent ) Using decanter
18F ... (3 indent ) Using filter
18FA .... (4 indent ) Filter on agitator
19 .. (2 indent ) With liquid extractor
19.1 ... (3 indent ) Disparate extractors
19.2 .... (4 indent ) Centrifugal extractor and gaseous drier
20 ... (3 indent ) Gaseous drier
21 ... (3 indent ) Squeezer extractor
22R .... (4 indent ) Roller
22A .... • (5 indent ) Domestic with wringer
22B .... • (5 indent ) Roller serves as reservoir
23R ... (3 indent ) Centrifugal extractor (e.g., centrifuge)
23.1 .... (4 indent ) With means to control or isolate vibration
23.2 .... • (5 indent ) Including counterbalance
23.3 .... • (5 indent ) Vertical axis centrifuge
23.4 .... (4 indent ) Including additional fluid handling means actuated by rotation of centrifuge
23.5 .... (4 indent ) Including fluid supply means
23.6 .... (4 indent ) Including impulsing means (e.g., agitator) within and independent of centrifuge
23.7 .... • (5 indent ) Oscillating type
24 .... (4 indent ) Horizontal or nonvertical axis tumbler and centrifuge
25 .... (4 indent ) Shiftable to vertical axis centrifuge
26 .... (4 indent ) Independent vat and centrifuge
23A .... (4 indent ) Guard ring on basket
13A .. (2 indent ) With water softener
27 . (1 indent ) Plural fluid treating machines
28 . (1 indent ) Combined operations
29 .. (2 indent ) With free element
30 .. (2 indent ) Tumbling, scrubbing and squeezing
31 .. (2 indent ) Scrubbing and squeezing
32 ... (3 indent ) One work element reciprocable longitudinally of a roll axis
33 ... (3 indent ) Cooperating movable work element
34 .... (4 indent ) One movable with tub
35 ... (3 indent ) Single movable work element
36 .... (4 indent ) Pivotally movable
37 .... (4 indent ) Rectilinearly movable
38 .. (2 indent ) Scrubbing and liquid flowing
39 ... (3 indent ) Endless apron and scrubber
40 .... (4 indent ) Scrubber reciprocable longitudinally of apron
41 ... (3 indent ) Horizontal axis pivoted carrier scrubber
42 ... (3 indent ) Carrier roll and platen
43 .. (2 indent ) Squeezing and liquid flowing
44 ... (3 indent ) Squeezer and endless belt
45 .... (4 indent ) Single endless belt
46 ... (3 indent ) Roll and carrier roll
47 ... (3 indent ) Roller bed and carrier roll
48 ... (3 indent ) Movable tub, tray or cage
49 .... (4 indent ) With shuttle squeezer
50 .... (4 indent ) Vertically movable
51 ... (3 indent ) Mechanical liquid pump
52 .. (2 indent ) Squeezing and dragging
53 .. (2 indent ) Impulsing and liquid flowing
54 .. (2 indent ) Impulsing and scrubbing
55 .. (2 indent ) Dragging and liquid flowing
56 .. (2 indent ) Dragging and scrubbing
57 ... (3 indent ) Drag on vertical axis
58 .. (2 indent ) Tumbling and liquid flowing
59 ... (3 indent ) Spurting nozzle, thermal flow
60 .. (2 indent ) Tumbling and scrubbing
61 .. (2 indent ) Tumbling and squeezing
62 .. (2 indent ) Liquid flowing and liquid applying
63 . (1 indent ) Scrubbing
64 .. (2 indent ) Scrubber and bed, reciprocatory
65 ... (3 indent ) Bed reciprocable about a roll periphery
66 ... (3 indent ) Both movable
67 .... (4 indent ) On horizontal axis
68 .... • (5 indent ) Vertical scrubbers
69 .... • (5 indent ) Unitary tub and bed
70 .... (4 indent ) On vertical axis
71 .... • (5 indent ) Tub movable with scrubber
72 .... (4 indent ) Rectilinearly
73 .... • (5 indent ) In vertical plane
74 ... (3 indent ) Scrubber, only, movable
75 .... (4 indent ) On horizontal axis
76 .... • (5 indent ) Plate scrubber transverse to axis
77 .... • (5 indent ) Plural scrubbers
78 .... • . (6 indent ) Individually pivoted scrubbers
79 .... (4 indent ) On vertical axis
80 .... • (5 indent ) Downwardly directed scrubbing face
81 .... (4 indent ) Rectilinearly
82 ... (3 indent ) Bed, only, movable
83 .... (4 indent ) On vertical axis
85 ... (3 indent ) Brush roller and roll
86 ... (3 indent ) Roll and platen
87 .... (4 indent ) Brush roll or brush platen
88 .... (4 indent ) Resiliently mounted platen
89 ... (3 indent ) Vertical axis scrubber
90 ... (3 indent ) Horizontal axis scrubber
91 .. (2 indent ) Fixed scrubber and bed, movable carrier
92 .. (2 indent ) Scrubbers
93 .. (2 indent ) Scrubber bed or cage
94 . (1 indent ) Squeezing
95 .. (2 indent ) Squeezer and textile cover
96 .. (2 indent ) Deformable receptacle
97 .. (2 indent ) Roll type
98 ... (3 indent ) Planetary
99 ... (3 indent ) Roll and roll
100 ... (3 indent ) Roll and roller bed
101 .... (4 indent ) Resiliently mounted roller bed
102 ... (3 indent ) Rectilinearly reciprocable roll and bed
103 .... (4 indent ) Fixed bed
104 .... • (5 indent ) Single roll
105 ... (3 indent ) Fixed axis roll and reciprocable bed
106 ... (3 indent ) Oscillating roll and bed
107 .... (4 indent ) Single roll
108 .. (2 indent ) Chasers
109 ... (3 indent ) Nonrotatable bed
110 .. (2 indent ) Squeezer and bed, both movable
111 ... (3 indent ) Vertically reciprocable squeezer and vertically pivoted bed
112 ... (3 indent ) Opposed receding and approaching squeezers
113 .. (2 indent ) Squeezer, only, movable
114 ... (3 indent ) Cradled
115 ... (3 indent ) Plural horizontally pivoted squeezers
116 .... (4 indent ) Bilateral squeezing faces
117 ... (3 indent ) Single horizontally pivoted squeezer
118 .... (4 indent ) Bilateral squeezing faces
119 .... (4 indent ) Edge pivoted horizontal plate
120 ... (3 indent ) Rectilinearly movable squeezer
121 .... (4 indent ) Bilateral squeezing faces
122 .... (4 indent ) Vertically
123 .... • (5 indent ) With squeezer displacement
124 .... • (5 indent ) Successively acting squeezers
125 .. (2 indent ) Mountings
126 ... (3 indent ) For roll squeezers
128 .. (2 indent ) Squeezer roll strippers
129 .. (2 indent ) Nonrotary squeezers
130 ... (3 indent ) With plungers or valves
131 . (1 indent ) Impulsing
132 .. (2 indent ) Oscillatory or rotary on vertical axis
133 ... (3 indent ) Bottom drive
134 .. (2 indent ) Impellers
135 . (1 indent ) Dragging
136 .. (2 indent ) Oscillatory or rotary on vertical axis
137 ... (3 indent ) Top drive
138 .. (2 indent ) Dollies
139 . (1 indent ) Tumbling
140 .. (2 indent ) Cage type tumbler supports, bearings or drive
141 .. (2 indent ) Wobbly cage
142 .. (2 indent ) Cage construction
143 ... (3 indent ) Compartmented
144 .. (2 indent ) Imperforate receptacle type
145 ... (3 indent ) Compartmented
146 ... (3 indent ) Fixed inclined axis
147 . (1 indent ) Liquid flowing
148 .. (2 indent ) Liquid displacement and movable cage or carrier
149 ... (3 indent ) Rotatable skein-supporting sticks
150 ... (3 indent ) Wound package, central liquid flow
151 ... (3 indent ) Vertically pivoted cage-pump or carrier-pump
152 .. (2 indent ) Movable cage or perforate tray
153 ... (3 indent ) Oscillatable cage or tray
154 .... (4 indent ) Vertical axis
155 ... (3 indent ) Rectilinearly reciprocable cage or tray
156 .... (4 indent ) Vertically reciprocable
157 .. (2 indent ) Movable carrier in vat
158 ... (3 indent ) Continuous textile feed and discharge
159 ... (3 indent ) Skein carrying stick or frame in liquid receptacle
160 .... (4 indent ) Rotatable skein stick
161 .... • (5 indent ) With skein stretching means
162 .... (4 indent ) Rotatable carrier for sticks or frames
163 .... • (5 indent ) Rotatable skein stick
164 .... • . (6 indent ) With skein stretching means
165 .... (4 indent ) Reciprocable carrier for sticks or frames
166 .... • (5 indent ) Rotatable skein stick
167 .... (4 indent ) Traversing skein stick
168 .... • (5 indent ) Endless belt stick carrier
169 .... • . (6 indent ) With skein stretching means
170 ... (3 indent ) Vertically reciprocable carrier
171 .. (2 indent ) Movable liquid receptacle
172 ... (3 indent ) Rockable or oscillatable liquid receptacle
173 .... (4 indent ) Fixed axis
174 .... • (5 indent ) Vertical axis
175 .. (2 indent ) Fixed liquid receptacle
176 ... (3 indent ) Helical textile course
177 ... (3 indent ) Web or rope pleating in receptacle
178 .... (4 indent ) Conditioning chutes
179 ... (3 indent ) Conditioning chutes
180 ... (3 indent ) Jiggers
181R ... (3 indent ) With liquid supply and efflux
182 .... (4 indent ) Rotating stock strainer
181D .... (4 indent ) Diaper washer
183 ... (3 indent ) With gas supply to liquid
184 ... (3 indent ) With liquid pump
185 .... (4 indent ) And interconnecting sampler
186 .... • (5 indent ) And textile holddown
187 .... (4 indent ) And textile holddown
188 .... (4 indent ) Skein supporting sticks
189 .... (4 indent ) Wound package, central liquid flow
190 .... (4 indent ) Surgers
191 .... (4 indent ) Thermal flow
192 .... • (5 indent ) Surgers
193 .... • (5 indent ) Tubular conductors
194 ... (3 indent ) Textile holddowns
195 ... (3 indent ) False bottoms
196 ... (3 indent ) Covers
197 ... (3 indent ) Elevatable textile supports
198 ... (3 indent ) Hollow wound package holders
199 ... (3 indent ) Carriers
200 . (1 indent ) Liquid applying
201 .. (2 indent ) Needle injectors
202 .. (2 indent ) Roller
203 ... (3 indent ) Intermittent liquid applicator
204 .. (2 indent ) Endless belts
205R .. (2 indent ) Tricklers and sprinklers
206 ... (3 indent ) With skein supporting sticks
205D ... (3 indent ) Diaper washer
205E ... (3 indent ) Reel type
207 . (1 indent ) Liquid supply or vapor supply to liquid
208 . (1 indent ) Drains and overflows
209 . (1 indent ) Fire or explosion preventers or fume removers
210 . (1 indent ) Loaders, unloaders, or dumpers
211 . (1 indent ) Limited area clamps
212 . (1 indent ) Elements
3SS . (1 indent ) Supersonic vibrator
214 . (1 indent ) Combined
215 . (1 indent ) Pounders
216 .. (2 indent ) With plunger
217 ... (3 indent ) And valve
218 .. (2 indent ) Valved
219 .. (2 indent ) With material receptacle
220 . (1 indent ) Scrubbers
222 . (1 indent ) Steamers
223 . (1 indent ) Washboards
224 .. (2 indent ) Brandboards, soap holders, and soap supply
225 .. (2 indent ) Splash guards and breast boards
226 .. (2 indent ) Rubbing surfaces
227 ... (3 indent ) Brush type
228 ... (3 indent ) Sheet or slab
229 .... (4 indent ) Surface design or elevation
230 ... (3 indent ) Of slats, bars, or tubes
231 ... (3 indent ) Of rollers
233 .. (2 indent ) With scrub surfaces
236 . (1 indent ) Combined wash bench and wringer support
237 . (1 indent ) Washtub or wash boiler attachments
238 .. (2 indent ) Wringer supports
239 . (1 indent ) Wringer supports
240 . (1 indent ) Clothes supporting or spotting boards
241 . (1 indent ) Wringers
242 .. (2 indent ) Flexible diaphragm squeezers
243 .. (2 indent ) Twisters
244 .. (2 indent ) Roller type
245 ... (3 indent ) Combined
247 ... (3 indent ) Enclosable
248 ... (3 indent ) Rolls in horizontal plane
249 ... (3 indent ) Interconnected functional units
250 .... (4 indent ) Guide, roll pressure, and clamp
251 .... (4 indent ) Roll pressure and clamp
252 .... (4 indent ) Guide and clamp
253R .... (4 indent ) Roll pressure and drive
253A .... • (5 indent ) Main frame release type
253B .... • (5 indent ) Electrical interconnection
253C .... • (5 indent ) Roll or bearing interconnection
254 .... (4 indent ) Drive and drain
255 .... (4 indent ) Drive and wringer rotation lock
256 ... (3 indent ) Pressure applying or release mechanisms
257 .... (4 indent ) Roll separation against spring pressure
258 .... (4 indent ) Power mechanisms
259 .... (4 indent ) Release through abnormal roll separation
260 .... (4 indent ) Plural manipulative pressure adjustors
261 .... • (5 indent ) And auxiliary release
262R .... (4 indent ) Single manipulative pressure adjustor
263R .... • (5 indent ) And auxiliary release
263A .... • . (6 indent ) Toggle
263B .... • . (6 indent ) Main frame release type
262A .... • (5 indent ) Toggle
262B .... • (5 indent ) Slow adjusting
264 ... (3 indent ) Guards, guides and feeds
265 .... (4 indent ) Movable guide or feed
266 .... • (5 indent ) Feed or idler roll
267 .... • (5 indent ) Apron between rolls
268 .... • (5 indent ) Apron to or from rolls
269R ... (3 indent ) Gearing and bearings
269B .... (4 indent ) Bearing structure
269C .... (4 indent ) Stop or reversal control
269CA .... • (5 indent ) Main frame release type
270 ... (3 indent ) Strippers
271 ... (3 indent ) Drains
272 ... (3 indent ) Mountings
273 .... (4 indent ) On horizontal axis
274 .... (4 indent ) On vertical axis
275 .... (4 indent ) On horizontal track
276 .. (2 indent ) Clamps
235D . (1 indent ) Diaper washer
901 HIGH FREQUENCY TREATMENT
902 DEVICES FOR STORAGE AND REUSE OF SOAP SUDS
903 PERFORATED DRUM AND CONTINUOUS TEXTILE FEED AND DISCHARGE
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
Note: Some content
linked to on this page may require a plug-in for Adobe
Acrobat Reader .
This file produced by USPTO - SIRA -
Office of Patent Automation - ReferenceTools Project.
Questions or comments relating to this file should be
directed to Patent
Automation Feedback .