Subclass |
| Title |
ClassTitle
|
| ===>
ELECTRICAL CONNECTORS
|
| | |
1 | | INTERRELATED CONNECTORS RELATIVELY MOVABLE DURING USE |
2 | | . And antivibration mounting |
3 | | . With means to apply lubricant or coolant |
4 | | . With storage means for flaccid conductor |
5 | | . Having liquid contact |
6 | | . Universal movement |
7 | | . . Having "nonsolid" contact, e.g., fibrous or pelletized bed |
8 | | . . Parts comprisng ball and socket |
9 | | . . One part having flexible contact fingers |
10 | | . Compound movement, e.g., rotary + linear |
11 | | . Movement about axis |
12 | | . . Including stacked plates used as conductor |
13 | | . . Rotary movement |
14 | | . . . Between cable and screw-type contact shell |
15 | | . . . Part comprising hand wheel, e.g., steering wheel |
16 | | . . . Part comprising vehicle wheel |
17 | | . . . Including ball or roller bearing used as conductor |
18 | | . . . Including annular contact |
19 | | . . . . Rolling contact |
20 | | . . . . Coaxial annular contacts |
21 | | . . . . . Concentric |
22 | | . . . . . Having axially facing contact surface |
23 | | . . . . . Having radially outwardly facing contact surface |
24 | | . . . . . . Three or more such contacts |
25 | | . . . . . . . Engaged by resiliently biased contact |
26 | | . . . . . . . . Laterally biased finger contact |
27 | | . . . . Having axially facing contact surface |
28 | | . . . . Having radially outwardly facing contact surface |
29 | | . . . Including resiliently biased contact |
30 | | . . . . Contact having resilient shank |
31 | | . . Hinge |
32 | | . Linear movement |
33 | | . . Expansion joint |
34 | | WITH VEHICLE STRUCTURE |
35 | | . Connection to towed vehicle |
36 | | . Connection to lamp |
37 | | WITH WEARING APPAREL |
38 | | WITH MAGNET |
39 | | . To urge mating connectors together |
40 | | . To urge connector to supporting surface |
41 | | WITH VACUUM APPLYING MEANS. E.G., SUCTION CUP |
42 | | . To urge mating connectors or contacts together |
43 | | WITH SELECTABLE CIRCUIT, E.G., PLUG BOARD |
44 | | . Planar circuit overlying a second planar circuit, both adapted to be electrically connected |
45 | | . . Connected by transversely inserted pin |
46 | | . . . Pin having selection feature |
47 | | . . . Panel member having planar surface for supporting circuit and parallel surface for supporting second circuit |
48 | | . . . Linear conductors of first surface; linear, normally disposed, conductors in second circuit |
49 | | . Including three or more contacts adapted to be selectively interconnected |
50 | | . . Panel having planar contact array with mating panel having mating planar contact array |
51 | | . . . Mounted for controlled movement with respect thereto |
52 | | . Coupling part including repositionable contact |
53 | | . Coupling part with selectably oriented mating part |
54 | | . Test panel |
55 | | PREFORMED PANEL CIRCUIT ARRANGEMENT, E.G., PCB, ICM, DIP, CHIP, WAFER, ETC. |
56 | | . Connection to lamp or electron tube |
57 | | . . Movable about its axis |
58 | | . . Electron tube moved perpendicularly to panel circuit |
59 | | . With mating connector which receives panel circuit edge |
60 | | . . Contacts at different distances from lead panel circuit edge |
61 | | . . Receives plural panel circuit edges |
62 | | . . Panel mounted connector which receives edge of panel circuit |
63 | | . For receiving coaxial connector |
64 | | . With guide for directing panel circuit movement |
65 | | . With provision to conduct electricity from panel circuit to another panel circuit |
66 | | . . Conductor is compressible and to be sandwiched between panel circuits |
67 | | . . Flexible panel |
68 | | . . Micro panel circuit arrangement, e.g., ICM, DIP, chip, wafer, etc. |
69 | | . . . Overlying second, coextensive micro panel circuit arrangement |
70 | | . . . Dual inline package (DIP) |
71 | | . . . . Leadless |
72 | | . . . . Contacts extending parallel with DIP at contact surface |
73 | | . . . . With external, contact enhancing clamp |
74 | | . . Overlying second preformed panel circuit, both adapted to be electrically connected |
75 | | . . . Connected by transversely inserted pin |
76.1 | | . Within distinct housing spaced from panel circuit arrangement |
76.2 | | . . Automotive junction box |
77 | | . Flexible panel |
78 | | . Distinct contact secured to panel circuit |
79 | | . . Panel circuit adapted to move along panel plane relative to coupling part for insertion of male contact |
80 | | . . . Resilient contact or to receive resilient contact |
81 | | . . Resilient contact or to receive resilient contact |
82 | | . . . In or for use in panel circuit aperture |
83 | | . . Contact soldered to panel circuit |
84 | | . . Contact secured to panel circuit by deformation |
85 | | . Of layers of insulation |
86 | | INCLUDING ELASTOMERIC OR NONMETALLIC CONDUCTIVE PORTION |
87 | | . Rigid carbon conductive member |
88 | | . Inductive shielding or arc suppressing means |
89 | | . . Sealing with coupled connector |
90 | | . . Between parallel conductors |
91 | | . Adapted to be sandwiched between preformed panel circuit arrangements |
92 | | WITH CIRCUIT CONDUCTORS AND SAFETY GROUNDING PROVISION |
93 | | . And means to block access to power contact surface |
94 | | . Uninterrupted support rail or contact, or for interfitting with uninterrupted support rail or contact |
95 | | . Grounding to connector container or housing |
96 | | . . Pliable conductor for making grounding connection of connector to container |
97 | | . . By means of connector mounting screw |
98 | | . Grounding to conductive sheath of cable |
99 | | . . Portion of connector beneath conductive sheath |
100 | | . Grounding to pipe, rod or conduit |
101 | | . Direct grounding of coupling part member passing into aperture |
102 | | . . Prong having locking provision, e.g., bayonet |
103 | | . . Movable or removable ground prong |
104 | | . . . Pivotable or rotatable about transverse axis |
105 | | . . Adapter |
106 | | . . Three-prong coupling part including ground prong, or receptacle |
107 | | . . . Duplex receptacle |
108 | | . Grounding of coupling part |
109 | | INTERMEDIATE MEMBER BETWEEN PRONG AND ENCOMPASSING PLANAR GROUND |
110 | | UNINTERRUPTED SUPPORT RAIL OR UNINTERRUPTED CONTACT |
111 | | . Arcuate, bendable or pliant rail or contact |
112 | | . . Circular rail or contact |
113 | | . With access restricting cover |
114 | | . . Bus duct |
115 | | . With means to join tandem rails or tandem contacts |
116 | | . With coupling movement-actuating means or retaining means in addition to contact of coupling part |
117 | | . . Uninterrupted contact accessible by mating contact moving in a first, then a lateral direction |
118 | | . . . Bayonet coupling part movable about axis |
119 | | . With mating part having mating connector portion and another connector portion electrically connected thereto, e.g., adapter |
120 | | . Molding type; e.g., baseboard |
121 | | FOR INTERFITTING WITH UNINTERRUPTED SUPPORT RAIL OR UNINTERRUPTED CONTACT |
122 | | . Coupling part with actuating means urging contact surface to move with respect to rest of connector and toward mating contact |
123 | | CANDLE SIMULATION TYPE |
124 | | . Adapter |
125 | | HAVING SPARK OR GLOW PLUG COVER |
126 | | . Inductive shielding; e.g., radio disturbance |
127 | | . With distinct securing means |
128 | | . Having removable closure |
129 | | MAGNETO POST TYPE |
130 | | MULTICONTACT INTERNAL COMBUSTION ENGINE DISTRIBUTOR CAP OR MULTICONTACT MATING PART |
131 | | CONNECTOR MOVABLE BETWEEN ACCESSIBLE AND INACCESSIBLE POSITIONS |
132 | | . With fluid pressure operating or control means |
133 | | WITH UNAUTHORIZED CONNECTION PREVENTER, E.G., KEY OR COMBINATION LOCK |
134 | | . Prong cover |
135 | | WITH CONTACT PREVENTER OR RETRACTABLE COVER PART |
136 | | . Movably mounted |
137 | | . . Moved by mating connector |
138 | | . . . Moved about an axis |
139 | | . . . . Connector moved rectilinearly for engagement, preventer or cover moved about axis parallel to direction of connector movement |
140 | | . . . Connector moved rectilinearly for engagement, preventer or cover moved rectilinearly and parallel thereto |
141 | | . . . . Retractable sheath |
142 | | . . Movable about axis |
143 | | . . . To misalign aperture with contact |
144 | | . . . With connector retaining means in addition to contact of connector |
145 | | . . Movable to misalign aperture with contact |
146 | | . Adapted to fit between contacts of first and second coupled connectors (e.g., power measuring meter) |
147 | | . With connector retaining means in addition to contact of connector |
148 | | . Dummy connector |
149 | | . Prong cover |
150 | | . . Protector for electron tube pin |
151 | | COUPLING PART COMBINED WITH MEANS TO ALLOW REPOSITIONING OF MATING PART FOR ENGAGEMENT WITH DIFFERENT CONTACTS ON MATING PART; E.G., FLASH CUBE |
152 | | WITH COUPLING SEPARATOR |
153 | | . Including retainer or joiner |
154 | | . . Destructible retainer |
155 | | . . Distinct from separator |
156 | | . . . Coaxial contacts, center one comprising separator, e.g., photo flash |
157 | | . . Integral retainer and cam separator |
158 | | . Means to utilize direct fluid action |
159 | | . Nonconducting pusher |
160 | | . . Including handle for direct manual urge to separate |
161 | | HEAT RESPONSIVE CONTACT PRESSURE CONTROL |
162 | | WITH RELATIVELY GUIDED MEMBERS AND INTERMEDIATE PLIABLE CONDUCTOR |
163 | | . Frangible pliable conductor; e.g., umbilical break-away |
164 | | . Relatively movable about axis |
165 | | . . Hinge |
166 | | CONVERTIBLE BY INTERNAL CHANGE TO SELECTIVELY COOPERATE WITH A DIFFERENT CONTACT |
167 | | . Connector for power measuring meter |
168 | | . Lamp or electron tube socket or base |
169 | | . Test probe |
170 | | . Coupling part |
171 | | . . Including repositionable contact |
172 | | . . . To nonuse or distinct use (e.g., male/female) position |
173 | | . . . To fit differently oriented contact |
174 | | . Including repositionable contact |
175 | | . . To fit different size contact |
176 | | FEMALE COUPLING PART CONVERTIBLE TO MALE COUPLING PART BY ADDITION OF PRONG |
177 | | COUPLING PART CONVERTIBLE TO DISTINCT SHAPE BY ADDITION OF NONREMOVABLE ELEMENT OR BY REMOVAL OF NONREUSABLE ELEMENT |
178 | | FLUENT CONDUCTING MATERIAL |
179 | | . Liquid |
180 | | CONTACT SEPARATION BY SNAP OR QUICK-BREAK ACTION |
181 | | INCLUDING ARC SUPPRESSING OR EXTINGUISHING MEANS |
182 | | . Lamp or electron tube socket |
183 | | . By arc suppressing or extinguishing environment |
184 | | . . Gas |
185 | | . . . Gas accomodation by relatively moving parts |
186 | | . Contact encasing chamber |
187 | | . . Movable relative to contact |
188 | | HAVING CIRCUIT INTERRUPTING PROVISION EFFECTED BY MATING OR HAVING "DEAD" CONTACT ACTIVATED AFTER MATING |
189 | | WITH OR COMPRISING REMOVABLE CIRCUIT MODIFYING ARRANGEMENT |
190 | | HAVING RETAINER OR PASSAGEWAY FOR FLUENT MATERIAL |
191 | | . Fluent material transmission line |
192 | | . . Connector electrically joined to line |
193 | | . . For use with line heater |
194 | | . . Electrical connection within line |
195 | | . . Connector/line assembly coupled to mating connector/line assembly by movement about an axis less than 360 degrees |
196 | | . Liquid material to dissipate, remove, or block the flow of heat |
197 | | . For urging contact toward or away from mating contact |
198 | | . Gas retainer |
199 | | . Liquid retainer |
200 | | . . Impregnated material |
201 | | . . Coupling part having contact encompassed by liquid storage chamber |
202 | | . . . Contact comprising tapered post or mating part (e.g., battery post) |
203 | | . . Crimped end terminal |
204 | | . . Encompassing wire |
205 | | . Passageway allowing escape of fluent material during mating |
206 | | . Vent |
207 | | WITH CONDUIT OR DUCT |
208 | | . Enclosed conductor electrically connected thereto |
209 | | . Molding type (e.g., baseboard) |
210 | | . Means to join conduit, duct or conductor sections |
211 | | . Including receptacle |
212 | | BUS DUCT |
213 | | . Means to join bus ducts |
214 | | COMPRISING COUPLING PART OF INDETERMINATE LENGTH LATERALLY OF CONNECTION |
215 | | . Included in prefabricated building panel (e.g., floor, ceiling, wall) |
216 | | . Molding type (e.g., baseboard) |
217 | | ALTERNATIVELY CONNECTED |
218 | | . Coupling part |
219 | | . . Test probe |
220 | | . . Lamp or electron tube socket or base |
221 | | . . Contact comprising prong |
222 | | . . Receptacle having distinct openings for distinct prongs |
223 | | . . Receptacle for prong of first lateral dimension or for prong of second lateral dimension |
224 | | . To receive contact from first direction or from second axially distinct direction |
225 | | CONTACT TAP BETWEEN NORMALLY ENGAGED COUPLING PARTS |
226 | | COUPLING PART TO RECEIVE FLUORESCENT OR NEON LAMP |
227 | | . Having curved tubular envelope |
228 | | . . Plural lamps |
229 | | . . Circular lamp |
230 | | . With sealing element or material for cooperation with coupled lamp |
231 | | . With contact for starting switch |
232 | | . With additional retaining or locking means for coupled connector and lamp |
233 | | . . Removable |
234 | | . Adjustably mounted |
235 | | . Plural lamps |
236 | | . Adapter |
237 | | . Separately biased connector |
238 | | . . Pivotable connector |
239 | | . With provision for transverse receipt of lamp contact |
240 | | . . By rotation of lamp about axis |
241 | | . . . Contact comprising laterally resilient spring finger |
242 | | . With provision for axial receipt of lamp contact |
243 | | . . Axially biased contact |
244 | | . . . Coil spring with provision to utilize conductivity thereof |
245 | | COUPLING PART HAVING HELICALLY DISPOSED STRANDLIKE CONTACT |
246 | | SELF ALIGNING CONTACT |
247 | | . Contact mounted in floating nonconductive holder |
248 | | . . Connector including housing or panel to support holder |
249 | | . Receptacle having two directly opposed contact arms and open sides between arms |
250 | | . . To receive fuse |
251 | | . . To receive rigid bar type connector, e.g.,busbar |
252 | | . Tubular socket |
253 | | SCREW COUPLING PART ENGAGED OR DISENGAGED WITHOUT ROTARY MOTION |
254 | | . Having radially movable thread means |
255 | | . . By axially moving wedge or cam |
256 | | . . Biased toward mating thread |
257 | | . . . Socket |
258 | | COUPLING PART WITH LATCHING MEANS AND TETHER OR EXPLOSIVE TO UNLATCH FROM MATING PART |
259 | | COUPLING PART WITH ACTUATING MEANS URGING CONTACT TO MOVE LATERALLY WITH RESPECT TO REST OF COUPLING PART AND TOWARD MATING PART |
260 | | . Having open slot for receiving preformed panel circuit arrangement or tape cable |
261 | | . Pivotable means, one portion actuating contact surface, another portion retaining coupling part |
262 | | . Urging stacked contacts to move with respect to rest of coupling part |
263 | | . Contractile receptacle |
264 | | . . For dual inline coupling part, e.g., DIP |
265 | | . Expandable contact or spreadable contacts |
266 | | COUPLING PART HAVING HANDLE OR MEANS TO MOVE CONTACT LATERALLY TO PERMIT UNCOUPLING |
267 | | . Having open slot for receiving panel circuit arrangement |
268 | | . Expandable, prong receiving socket |
269.1 | | . To move contact with respect to similar contact |
269.2 | | . . Comprising laterally movable prong or socket attached to flaccid conductor |
270 | | . Movable latching prong or latch on prong |
271 | | WITH SEALING ELEMENT OR MATERIAL FOR COOPERATION WITH COUPLED CONNECTOR, E.G., GASKET |
272 | | . Sealing element having cross section that is neither circular nor rectangular |
273 | | . . Tapered cross-section |
274 | | . . Combined with distinct cable sheath sealing element or material |
275 | | . Combined with distinct cable sheath sealing element or material |
276 | | . Including chamber for contact potting |
277 | | . With helically threaded coupling movement-actuating means or retaining means in addition to contact of coupling part |
278 | | HAVING RESILIENT HOUSING FOR SEALING WITH COUPLED CONNECTOR |
279 | | . Combined with distinct cable sheath sealing element or material |
280 | | . Connector comprising lamp or electron tube socket or base |
281 | | . Having interengageable sealing extension |
282 | | . Housing comprising resilient latching means |
283 | | COUPLED CONNECTOR TO SEALINGLY FIT WITH FIRST CONNECTOR |
284 | | ADAPTED TO COOPERATE WITH DUPLICATE CONNECTOR |
285 | | . Sequentially connected contacts, e.g., zipper type |
286 | | . Engaged by axial and pivotal movements (e.g., bayonet) |
287 | | . Engaged by lateral movement |
288 | | . . Pivotal |
289 | | . Butt coupling |
290 | | . Contact intermeshable with duplicate mating contact |
291 | | . . Plural, electrically distinct contacts |
292 | | . With coupling movement retaining means in addition to contact of coupling part |
293 | | . . Resilient |
294 | | . . With relatively rotatable movement-actuating or retaining ring |
295 | | . Resiliently biased contact |
296 | | WITH COUPLING MOVEMENT-ACTUATING MEANS OR RETAINING MEANS IN ADDITION TO CONTACT OF COUPLING PART |
297 | | . With guiding means for removable automobile radio or record player |
298 | | . . Including resilient latching retaining means |
299 | | . With coupling part retained in connection with mating part by presence of distinct coupling part |
300 | | . . Adapter |
301 | | . Retaining means requiring destruction of element before separation |
302 | | . . Threaded coupling part |
303 | | . . . Requiring destruction of lamp envelope |
304 | | . Including lock for retaining means (e.g., key or combination lock or requiring "special" tool) |
305 | | . . Magnetically operated latch |
306 | | . . Threaded coupling part |
307 | | . . . Having freely rotatable component to prevent unthreading |
308 | | . . . Retaining means entirely exterior of coupling part |
309 | | . . . Retaining means comprising part of female coupling part |
310 | | . Retaining means with distinct movement-actuating means to move coupling part axially |
311 | | . . For bayonet (breech) type locking ring |
312 | | . Coupling part with relatively pivotable concentric movement-actuating or retaining ring |
313 | | . . Coupling part having appurtenant means for supporting other structure |
314 | | . . Retaining bayonet |
315 | | . . . Having coupling indicating indicia or signal |
316 | | . . . Bayonet lug on axially extending finger |
317 | | . . . With means to move ring |
318 | | . . . With means to prevent bayonet release |
319 | | . . . With spring to longitudinally bias movement-actuating or retaining ring |
320 | | . . Threaded ring or ring adapted to engage threaded mating part |
321 | | . . . With means to prevent unthreading |
322 | | . . . Coupling part having concentric contacts |
323 | | . . . Adapter |
324 | | . Male contact pin with blockable retaining means at tip, e.g., Modrey |
325 | | . Coupling part for receiving edge of planar board moving parallel to plane |
326 | | . . With angular mating |
327 | | . . Retaining means exterior of slot |
328 | | . . . Fingerlike grasping means comprising portion of coupling part |
329 | | . For direct connection to a flexible tape or printed circuit board |
330 | | . For dual inline package (DIP) |
331 | | . . Movement-actuating or retaining means comprises cover press |
332 | | . Bayonet coupling part movable about its axis |
333 | | . . With distinct means to secure movement-actuating or retaining means against movement |
334 | | . . Coupling part including appurtenant means for supporting other structure |
335 | | . . Comprising cylindrical shell having lug receiving slot |
336 | | . . . Lamp or electron tube socket |
337 | | . . Having axially extending bayonet contact |
338 | | . Including movement of coupling part about axis |
339 | | . . Threaded coupling part |
340 | | . . . With socket contact transversely engaging male threaded part |
341 | | . . Pivotal movement |
342 | | . Including compound movement of coupling part |
343 | | . . Including appurtenant means for supporting other structure |
344 | | . Having push-pull contacts spaced along only one planar side wall transverse to longitudinal engagement axis (e.g., telephone jack or plug) |
345 | | . Retaining means |
346 | | . . Adapted to engage contact of mating part |
347 | | . . Laterally moving slide |
348 | | . . Laterally moving roller or ball |
349 | | . . Toroidal band urged radially of connection or adapted to be compressed for retention, e.g., O-ring |
350 | | . . Finger or stretchable sleeve resiliently urged laterally of connection |
351 | | . . . Coupling part having appurtenant means for supporting other structure |
352 | | . . . With additional means to cause or prevent unlatching |
353 | | . . . Finger inwardly biased during coupling or uncoupling |
354 | | . . . . Rearwardly extending finger |
355 | | . . . Plural independent coupling parts |
356 | | . . . Coupling part comprising lamp or electron tube socket |
357 | | . . . Resilient finger |
358 | | . . . . With graspable portion |
359 | | . . Retaining means comprising helically threaded member |
360 | | . . . For lamp or electron tube |
361 | | . . . Including appurtenant means for supporting other structure |
362 | | . . . Parallel to connection |
363 | | . . . . For retaining tubular conductor in electrical contact |
364 | | . . . . Passing centrally through coupling part |
365 | | . . . . Adapter |
366 | | . . Retaining functioning electrical component (e.g., tube, lamp, fuse, battery, etc.) |
367 | | . . Protective enclosure |
368 | | . . Single means retaining plural distinct coupling parts and mating parts together |
369 | | . . For unsupported coupling part and unsupported mating part, (e.g., connecting extension cords) |
370 | | . . Resiliently urging coupling part and mating part together |
371 | | . . Pliable band, conductor sheath engaging means, or adhesive |
372 | | . . Rotatable retaining means, pivotable retaining means, or actuated gripping retaining means |
373 | | . . Wall or outlet mounted |
374 | | WITH GUIDING MEANS FOR MATING OF COUPLING PART |
375 | | . Lamp or electron tube socket or base |
376 | | . For constrained pivotal or plural movement coupling |
377 | | . For guiding side of movable panel, e.g., circuit board |
378 | | . Rodlike guide member extending in coupling direction or tubular passage for receiving rodlike guide member |
379 | | . . With plural contacts circularly disposed about guide opening or rodlike member, e.g., electron tube base |
380 | | . . Tubular passage receives contact |
381 | | . . . Bare contact |
382 | | INCLUDING VIBRATION CUSHIONING OR ABSORBING MEANS |
383 | | . Adapted to fit between opposing faces of mated connectors |
384 | | . For supporting connector |
385 | | . . By gripping mating connector |
386 | | WITH COMMONING MEANS FOR RETURN GROUND |
387 | | CONTACT COMPRISING CUTTER (SEVERING, PIERCING, ABRADING, SCRAPING, BREAKING OR TEARING) |
388 | | . Adapted to engage tapered post (e.g., storage battery terminal) |
389 | | . Insulation cutter |
390 | | . . Adapted to engage liquid, granular or metallic wool conductor |
391 | | . . Conductor sheath piercing |
392 | | . . . With means to cut off excess end of conductor |
393 | | . . . Cutter piercing insulation parallel to conductor axis |
394 | | . . . Coaxial cable |
395 | | . . . Having slot edge for cutting insulation |
396 | | . . . . With additional diverse sharp cutting edge |
397 | | . . . . Contact engages conductor in at least two locations spaced along conductor axis |
398 | | . . . . . Conductor engaging slot extends through bight of contact |
399 | | . . . . . With stress relieving means for conductor to terminal joint |
400 | | . . . . . With distinct surface holding conductor in slot |
401 | | . . . . Contact engages conductor at axial location and engages insulation at second axial location to relieve stress at conductor to terminal joint |
402 | | . . . . Single conductive member having plural slots formed by three or more fingers for connecting plural conductors |
403 | | . . . . . From different margins of contact |
404 | | . . . . Plural contacts, each formed by slot between pair of fingers |
405 | | . . . . . Longitudinally and laterally staggered contacts |
406 | | . . . . Contact is portion of elongated channel |
407 | | . . . . . With stress relieving means for conductor to terminal joint |
408 | | . . . . More than one conductor in same slot |
409 | | . . . Pivoting cutter, pivoting means to operate cutter, or pivoting means to move conductor against cutter |
410 | | . . . . Pivoting cutter |
411 | | . . . Comprising screw, screw operated cutter, or screw means to move conductor against cutter |
412 | | . . . . Screw means to move conductor against cutter |
413 | | . . . . . Single element cutting and connecting plural conductors |
414 | | . . . . . Lamp or electron tube socket or base |
415 | | . . . . Screw threads pierce insulation |
416 | | . . . . Piercing means comprising end of screw |
417 | | . . . Rectilinearly moving operator |
418 | | . . . Contact member cutting to contact first conductor and contacting second conductor |
419 | | . . . . Lamp or electron tube socket or base |
420 | | . . . Flexibly tensioned strap |
421 | | . . . Crimped |
422 | | . . . . For use with tape cable |
423 | | . . . . Cutting by peripheral end of sheath encircling crimped contact |
424 | | . . . . Cutting by stamped out tooth of sheath encircling crimped contact |
425 | | . . . Nail like cutter |
426 | | . . Passing through insulation to make contact |
427 | | . Axially penetrating the elongated conductor |
428 | | . . Comprising screw or screw operated means |
429 | | . . . Screw threads engage conductor |
430 | | . . Contact permanently secured to a conductor, e.g., crimped, soldered, etc. |
431 | | . Comprising screw, screw operated cutter, or screw means to move conductor against cutter |
432 | | . . Screw operated pivoted cutter |
433 | | . . Annular cutter |
434 | | . Annular cutter |
435 | | . U-shaped clamp |
436 | | . Resiliently biased |
437 | | . . Finger |
438 | | . . . Resilient finger |
439 | | . . . . Plural fingers |
440 | | . . . . Spaced along longitudinal axis of engagement |
441 | | . . . . Adapted to grip upon withdrawal of mating part |
442 | | . Crimped |
443 | | . Having slot edge for cutting |
444 | | . Piercing into support structure |
445 | | WITH OR HAVING FLEXIBLE GUARD OR SUPPORT FOR CABLE OR CONDUCTOR |
446 | | . Pivotal |
447 | | . Resilient |
448 | | . . Coil spring concentric with cable or conductor |
449 | | WITH STRESS RELIEVING MEANS FOR CONDUCTOR TO TERMINAL JOINT |
450 | | . Drop cord attaching means, e.g., block or rosette |
451 | | . Including provision to attach tether |
452 | | . Including provision to attach to stress bearing portion of conductor |
453 | | . Enlargement engaging means |
454 | | . . Including longitudinally threaded connector part to effect gripping of enlargement |
455 | | . . Distinct cable attached enlargement means |
456 | | . Curved conductor path |
457 | | . . Means comprising notched or apertured body |
458 | | . . . Plate-like body |
459 | | . . Conductor clamping and shaping |
460 | | . Conductor gripped by or entirely within connector housing |
461 | | . . Including longitudinally threaded connector part to effect gripping of conductor |
462 | | . . . Distinct clamp actuated by threaded connector part |
463 | | . . Eccentric gripping means |
464 | | . . By pliant, conductor encircling strap |
465 | | . . Longitudinally divided connector housing grips conductor |
466 | | . . . With additional contacts comprising coupling part mating along axis normal to conductor |
467 | | . . . Hinged connector housing parts |
468 | | . . With additional contacts comprising coupling part mating along axis normal to conductor |
469 | | . . Transverse conductor gripping screw, or with means to transversely move conductor gripping means |
470 | | . Conductor gripped outside connector housing by distinct clamp |
471 | | . . By pliant conductor encircling strap |
472 | | . . With means to transversely move conductor gripping means |
473 | | . . . With additional contacts comprising coupling part mating along axis normal to conductor |
474 | | INCLUDING OVERSTRESS PREVENTING MEANS |
475 | | . Frangible element |
476.1 | | INCLUDING HANDLE OR DISTINCT MANIPULATING MEANS |
477 | | . For attachment of connector to overhead conductor |
478 | | . . With conductor inside handle or manipulating means |
479 | | . . Including handle operated screw to effect gripping of overhead conductor |
480 | | . Distinct manipulating means; e.g., hot stick |
481 | | . Randomly manipulated implement |
482 | | . . Test probe |
483 | | . Coupling part |
484 | | . . Including bale or loop |
485 | | WITH PROVISION TO DISSIPATE, REMOVE, OR BLOCK THE FLOW OF HEAT |
486 | | . Tube clamp |
487 | | . Distinct heat sink |
488 | | WITH INDICATING OR IDENTIFYING PROVISION |
489 | | . Connection indicating provision |
490 | | . . Indicator light |
491 | | . Distinct indicia bearing member |
492 | | INCLUDING OR FOR USE WITH TAPE CABLE |
493 | | . For connection to rigid preformed panel circuit arrangement, e.g., PCB |
494 | | . Single cable end into dual rows of contacts |
495 | | . With mating connection region formed by bared cable |
496 | | . . Bared cable wrapped into U-shape about insertion projection |
497 | | . With shield, ground conductor or ground commoning means |
498 | | . Plural cables to multicontact connector or single cable branching to plural connectors |
499 | | . Including connector housing surrounding cable |
500 | | ENERGY CELL SUBSTITUTION DEVICE INCLUDING PLURAL CONTACTS (E.G., JUMPER) OR WITH SUPPORT MEANS FOR ENERGY CELL |
501 | | WITH STORAGE MEANS FOR FLACCID CONDUCTOR |
502 | | WITH FLACCID CONDUCTOR AND WITH ADDITIONAL CONNECTOR SPACED THEREALONG |
503 | | . Adapted to interconnect vehicles |
504 | | . Adapted to connect to a battery |
505 | | . And with third connector spaced therealong |
506 | | . Connector comprising pivoted spring biased clamp |
507 | | JUMPER (OR SHORT CIRCUITING COUPLING PART) |
508 | | . Adapted to be used with power measuring meter |
509 | | . Coupling part comprising short circuiting cover or manipulatable supporting means |
510 | | . To bridge post-type contacts |
511 | | . Including plural prongs |
512 | | . Including plural female contacts |
513 | | . Having spring biased contact |
514 | | . Parallel or supplemental nonshielded path |
515 | | PARALLEL OR SUPPLEMENTAL NONSHIELDED PATH |
516 | | WITH PROVISION TO ISOLATE CIRCUITRY BY SEVERANCE OF BRIDGING ELEMENT |
517 | | POWER MEASURING METER COUPLING PART |
518 | | COUPLING PART CONVERTIBLE TO DIFFERENT FORMAT BY SUBSTITUTION OF DIFFERENT CONTACT |
519 | | WITH PROVISION TO RESTRICT ENVIRONMENT EFFECTS |
520 | | . Sacrificial material |
521 | | . Including contact cover or case |
522 | | . . Connector comprising or mating with tapered post, e.g., storage battery terminal |
523 | | . . Having elastic or heat shrunk cable grip |
524 | | CORROSION RESISTANT CONDUCTING MATERIAL OTHER THAN LEAD |
525 | | FOR DUAL INLINE PACKAGE (DIP) |
526 | | ALIGNING MEANS FOR DUAL INLINE PACKAGE (DIP) |
527 | | WITH SUPPORTING MEANS FOR COUPLING PART |
528 | | . Nonuse covering means, e.g., connector storage means |
529 | | . And including appurtenant means for supporting other structure |
530 | | . . And including electrical contact for load bearing |
531 | | . Flexible suspension means, e.g., chain or strand |
532 | | . Interfitting with channel or double rail |
533 | | . Also supporting mating part |
534 | | . Universally or pivotally adjustable supporting elements |
535 | | . Outlet box |
536 | | . Supporting means comprising face plate or closure member for outlet box |
537 | | . . For ceiling box |
538 | | . Outlet receptacle mounting flange |
539 | | . . Yoke |
540.1 | | . Supporting plural, independent coupling parts |
541 | | . . Plural lamp or electron tube sockets |
541.5 | | . . Stacked right-angle connector for use on printed circuit board (i.e., PCB) |
542 | | . Elongated member supporting connector at its extremity or member for interfitting with such an elongated member |
543 | | . . Threaded shaft or tube |
544 | | . Coupling part or mating part extending into panel opening |
545 | | . . With securing by movement of coupling part in plane of panel |
546 | | . . . Movement about connective axis; e.g., bayonet |
547 | | . . . . To preformed panel circuit arrangement |
548 | | . . . . With sealing to panel |
549 | | . . . . Resilient gripping of panel |
550 | | . . With opening encircling retaining collar |
551 | | . . . Concentrically screw threaded collar |
552 | | . . Including resilient securing |
553 | | . . . By resilient member on panel |
554 | | . . . Panel circuit arrangement |
555 | | . . . With means to deform or lock resilient means |
556 | | . . . With sealing to panel |
557 | | . . . Laterally flexed finger on coupling part |
558 | | . . . . Including lamp or electron tube socket |
559 | | . . With sealing to panel |
560 | | . . Coupling part secured to panel by stressing beyond elastic limit |
561 | | . . . By stressing panel beyond elastic limit |
562 | | . . Coupling part including panel engaging shoulder |
563 | | . . . Comprising detachable or adjustable flange |
564 | | . . . Directly attached to panel by elongated fastener in tension (e.g., rivet, bolt or screw) |
565 | | . . . With opposed, cooperating panel engaging member |
566 | | . . . For permanent attachment to panel, e.g., by welding |
567 | | . Having resilient means engaging panel opening |
568 | | . Coupling part supported by randomly manipulated appliance (e.g., electric iron) |
569 | | . Flange on coupling part |
570 | | . . Plural detachable flanges |
571 | | . Comprising or for use with supporting panel |
572 | | . . Conductor extending into panel opening |
573 | | . . Directly attached to panel by elongated fastener in tension (e.g., rivet, bolt or screw) |
574 | | . Means to clamp |
575 | | . . Resilient clamp |
576 | | . To be engaged by suspension means |
577 | | COMBINED WITH NONELECTRICAL FEATURE |
578 | | INCLUDING OR FOR USE WITH COAXIAL CABLE |
579 | | . Having means for interconnecting outer conductors of three or more cables |
580 | | . For cable having three or more coaxial conductors |
581 | | . Adapted to join cable conductors to different type conductors (e.g., to PCB conductors) |
582 | | . Adapted to secure cables perpendicular to one another or a cable perpendicular to coupling axis |
583 | | . Having screw-threaded or screw-thread operated cable grip |
584 | | . . With radially compressible cable grip |
585 | | . Having crimpable metallic cable conductor grip |
586 | | COUPLING PART INCLUDING FLEXING INSULATION |
587 | | . Sealing |
588 | | . . Resilient, coupling part encircling jacket |
589 | | . . Within rigid coupling part shell |
590 | | . Storage strip for a plurality of coupling parts |
591 | | . Coupling part for use between duplicate coupling parts (e.g., sandwiched between printed circuit boards) |
592 | | . Insulation distorted by or to effect coupling action |
593 | | . . Receptacle adapted to bias contact and cause indirect gripping of mating contact |
594 | | . Resiliently interlocking coupling part with adjacent modular coupling part |
595 | | . Hinged or flexed detent on insulation engaging to secure contact within coupling part housing |
596 | | . Coupling part housing hinged for coupling part assembly |
597 | | . Having plural, laterally spaced, prongs or prong sockets |
598 | | . . Coupling part including shell and assembly of contact and contact supporting insulator |
599 | | . . And multiple insulating components |
600 | | . . Having laterally spaced prongs |
601 | | . . . Folded prongs |
602 | | . Lamp or electron tube socket or base |
603 | | . Retaining contact within distinct coupling part housing |
604 | | WITH EXTERNAL CONDUCTOR OR CABLE EMBEDDED IN INSULATIVE SEALING MATERIAL |
605 | | . Lamp or electron tube socket or base |
606 | | . Molded connector body |
607 | | HAVING OR PROVIDING INDUCTIVE OR CAPACITIVE SHIELD |
608 | | . Conductive shielding material individually surrounding or interposed between mutually insulated contacts |
609 | | . Resilient conductive means providing additional electrical path between mating outer shield members |
610 | | . Having means for electrically connecting shield of shielded cable to connector shield member |
611 | | WITH VITREOUS-TYPE ENVELOPE (E.G., BASE OF LAMP OR VACUUM TUBE) |
612 | | . Connector or contact secured to each end of double-ended envelope |
613 | | . Connector of the type having only concentric annular contacts or annular contact disposed concentrically about an axial contact |
614 | | . . Having three or more contacts (e.g., for three-way lamp) |
615 | | . . Having screw-thread-coupling contact |
616 | | . Having bayonet-coupling contact |
617 | | . Plug having spaced, longitudinally engaging, prong-like contacts |
618 | | . . Having three or more circularly arranged contacts (e.g., base of vacuum tube) |
619 | | . Having only two duplicate contacts arranged bilaterally symmetric about longitudinal axis of engagement |
620 | | WITH CIRCUIT COMPONENT OR COMPRISING CONNECTOR WHICH FULLY ENCLOSES CIRCUIT COMPONENT |
621 | | . With or for fuse |
622 | | . . Comprising coupling part housing for enclosing fuse |
623 | | CABLE COMPOSED OF MUTUALLY INSULATED CONDUCTORS HAVING SEPARATELY CARRIED CONDUCTOR END TERMINALS |
624 | | PLURAL CONTACTS DISPOSED INTERMEDIATE ENDS OF CABLE HAVING SHEATH ENCLOSING MUTUALLY INSULATED CONDUCTORS (E.G., SEISMIC TYPE CABLE) |
625 | | WITH INSULATION OTHER THAN CONDUCTOR SHEATH |
626 | | . Plural-contact coupling part |
627 | | . . For direct simultaneous contact with plural battery or cell terminals |
628 | | . . Single-contact connector for interposition between two plural-contact coupling parts (e.g., adaptor) |
629 | | . . For coupling to edge of printed circuit board or to coupling part secured to such edge |
630 | | . . . Having elongated slot for receiving edge of printed circuit board |
631 | | . . . . Plural slots for electrically interconnecting plural printed circuit boards |
632 | | . . . . Providing direct contact between contacts of printed circuit board and different type conductors |
633 | | . . . . Having polarizing means |
634 | | . . . . Having multipart insulating body |
635 | | . . . . . Relative movement of insulating parts alters contact pressure |
636 | | . . . . Contacts within slot engage opposite sides of printed circuit board |
637 | | . . . . . Separate mutually insulated contacts on opposite longitudinal sides of slot |
638 | | . . Two or more plural-contact coupling parts combined in one integral unit |
639 | | . . . Unit includes three or more diverse types of coupling parts |
640 | | . . . One coupling part of unit repositionable relative to another thereof |
641 | | . . . Unit includes coupling part having screw-thread-coupling contact |
642 | | . . . . Plug having surrounding screw-thread-coupling contact |
643 | | . . . . . Combined with plural receptacles with each having internal screw-thread coupling contact |
644 | | . . . . . Combined with receptacle having internal bayonet-coupling contact |
645 | | . . . . . Combined with push-pull-coupling receptacle |
646 | | . . . . . . Wherein the receptacle is adapted to receive plug having spaced prong-like contacts |
647 | | . . . . Receptacle having internal screw-thread-coupling contact combined with plug having spaced, longitudinally engaging, prong-like contacts |
648 | | . . . . Plural receptacles with each having screw-thread-coupling contact |
649 | | . . . Unit includes plural receptacles with each having bayonet-coupling contact |
650 | | . . . Unit includes receptacle for receiving plug having spaced, longitudinally engaging, prong-like contacts |
651 | | . . . . Combined with plug having spaced, longitudinally engaging, prong-like contacts |
652 | | . . . . . Wherein the plug is combined with a plurality of the receptacles adapted to receive spaced-prong plug |
653 | | . . . . Combined with diverse type of coupling part |
654 | | . . . . Having receptacle at each of parallel opposed surfaces or sides |
655 | | . . . Unit includes plug having spaced, longitudinally engaging, prong-like contacts |
656 | | . . With common means securing plural conductors to separate contacts |
657 | | . . . Screw-thread operated |
658 | | . . Having separate through-passageways for enabling securement of intermediate portion of conductors thereto |
659 | | . . . Coupling part comprises receptacle having internal screw-thread-coupling contact |
660 | | . . Plural-contact coupling part comprises receptacle or plug |
661 | | . . . Having screw-thread-coupling contact |
662 | | . . . . Screw threads formed on cylindrical or annular contact |
663 | | . . . . . Screw-threaded center-contact type |
664 | | . . . . . Plug having screw-thread-coupling contact and also having resilient or spring-biased center contact |
665 | | . . . . . Having mutilated, irregular, interrupted, or discontinuous contact thread |
666 | | . . . . . Receptacle having internal screw-thread-coupling contact |
667 | | . . . . . . And also having resilient or spring-biased center contact |
668 | | . . . Having only push-pull-engaging contacts spaced along longitudinal axis of engagement (e.g., jack-type receptacle or plug) |
669 | | . . . . Plug having cylindrical or annular contacts of substantially the same diameter (e.g., jack-type plug) |
670 | | . . . Having coupling contact requiring successive relative motions in different directions to complete the coupling |
671 | | . . . . Having bayonet-coupling contact |
672 | | . . . . . Bayonet-coupling contact comprises cylindrically-shaped ring or shell |
673 | | . . . . . Having plural bayonet-coupling contacts |
674 | | . . . . . . Polarized |
675 | | . . . Having annular, push-pull-engaging contact concentrically disposed about longitudinal axis of engagement |
676 | | . . . Having push-pull-engaging contacts spaced along planar side wall transverse to longitudinal engagement axis (e.g., telephone jack or plug) |
677 | | . . . Polarized |
678 | | . . . . By asymmetric disposition or asymmetric shape of duplicate contacts |
679 | | . . . . By having or receiving contacts of similar type which are unequal in size or shape |
680 | | . . . . By key or guideway |
681 | | . . . . . User adjustable key or guideway |
682 | | . . . Receptacle for receiving plug having spaced, longitudinally engaging, prong-like contacts |
683 | | . . . . Adapted to receive base connector of electron tube |
684 | | . . . . . Receptacle body formed of thin, superposed plates or discs of insulation |
685 | | . . . . Having only three prong-receiving recesses arranged to define apices of a triangle |
686 | | . . . . Having multipart insulating body or casing |
687 | | . . . . . Divided parallel to longitudinal engagement axis (e.g., formed of two casing halves) |
688 | | . . . . . Formed of superposed planar sheets or plates of insulation |
689 | | . . . . . Planar insulating cover overlying insulating body or casing |
690 | | . . . . . Insulating parts secured together by screw-threaded means |
691 | | . . . . Having additional resilient member cooperating with contact to increase grip on contact of mating plug |
692 | | . . . Plug having spaced, longitudinally engaging, prong-like contacts |
693 | | . . . . With insulative covering about part of protruding portion of each contact |
694 | | . . . . Having wire conductor receiving passageway extending perpendicular to longitudinal axes of contacts |
695 | | . . . . Having multipart insulating body |
696 | | . . . . . Divided parallel to longitudinal engagement axis (e.g., formed of two casing halves) |
697 | | . . . . Having means other than screw-threaded means for securing wire-type conductor to contact |
698 | | . . . Receptacle for transversely receiving elongated fuselike component having contact at each end thereof |
699.1 | | . . . Having only two duplicate contacts arranged bilaterally symmetric about longitudinal axis of engagement |
699.2 | | . . . . Lamp-receiving socket |
700 | | . . . Having spring-biased, plunger-type contact movable along line parallel to longitudinal axis of engagement |
701 | | . . . Having modular or multipart insulating body |
702 | | . Insulating body comprising or for use with cylindrical cap and shell type lamp receptacle casing |
703 | | . . Insulating lining or contact support within separable, metallic cap and shell casing |
704 | | . . Insulating lining or contact support within metallic cap casing |
705 | | . . Insulating lining or contact support within metallic shell casing |
706 | | . . Insulating lining for interior of metallic cap or shell casing |
707 | | . . Separable insulating cap and shell casing |
708 | | . Insulating body providing direct contact or engagement of duplicate terminals or conductors |
709 | | . Insulating body having plural mutually insulated terminals or contacts (e.g., terminal block) |
710 | | . . Duplicate insulating blocks or boards interconnected by frangible or severable part |
711 | | . . With common operator for simultaneously securing separate contacts thereof to separate external contacts or conductors |
712 | | . . Modular or multipart insulating body |
713 | | . . . Relatively movable insulating body parts |
714 | | . . . Formed of three or more thin, flat, superposed layers, plates, or sheets of insulation |
715 | | . . . Modular insulating block or board |
716 | | . . . . With support track for receiving plural insulating blocks or boards |
717 | | . . . . Having integral means to interlock or interfit with a duplicate insulating block or board |
718 | | . . . Having protective cover formed from insulating material |
719 | | . . With conductor fanning means |
720 | | . . Terminals or contacts secured by permanently bending or deforming metallic part onto insulation |
721 | | . . Having three or more spaced, electrically interconnected, duplicate terminals or contacts |
722 | | . . Terminals or contacts embedded in insulating body |
723 | | . Insulating body with spaced, electrically interconnected, duplicate terminals or contacts |
724 | | . . Modular or multipart insulating body |
725 | | . Having movable insulated part for securing conductor or mating connector thereto |
726 | | . . Clamp-type connector for storage battery post |
727 | | . . Screw-thread-operated securing part |
728 | | . . . With spring operating on conductive clamp portion of securing part |
729 | | . . Spring-operated or resilient securing part |
730 | | . Terminal connector having insulating tube or sleeve adapted to be crimped or heat-shrunk onto wire conductor |
731 | | . Insulating body divided parallel to longitudinal axis of engagement (e.g., formed of two casing halves) |
732 | | . Interfitting or abutting insulating bodies carried by separate mating connectors |
733.1 | | . Metallic connector or contact secured to insulation |
734 | | . . Annular or center contact secured to lamp-type insulating receptacle or base |
735 | | . . . Screw-threaded contact having mutilated, irregular, interrupted, or discontinuous screw thread |
736 | | . . Secured by heat-molding or cold-deforming insulation or by casting, welding, or cementing |
737 | | . . Secured to insulation by screw-threaded means |
738 | | . . . Insulating tube, sleeve, or cap concentrically surrounding part of connector |
739 | | . . . Including resilient or spring-biased part for securing wire-conductor or mating connector thereto |
740 | | . . Secured to insulation by bayonet engagement |
741 | | . . Secured by permanently bending, deforming, or crimping metallic part |
742 | | . . . Having separate bendable or deformable securing part (e.g., rivet) |
743 | | . . . Resilient or spring-biased socket contact or connector |
744 | | . . Secured by resiliently biased part latching behind shoulder or into recess |
745 | | . . . Separate latching part secured to contact prior to engagement with insulation |
746 | | . . . Latching part unitary with metallic connector or contact |
747 | | . . . . Coupling part type contact inserted into insulation from coupling end |
748 | | . . . . Resilient socket contact for surrounding or engaging opposed surfaces of mating plug contact |
749 | | . . . . . Adapted to have secured wire conductor extending transverse to longitudinal coupling axis |
750 | | . . Insulating tube, sleeve, or cap concentrically surrounding part of connector |
751 | | . . Secured by part resiliently gripping insulation |
752 | | . . Secured by superposition of insulating body parts |
752.5 | | . . With guiding means for inserted contact |
753 | | CYLINDRICAL METALLIC CAP AND SHELL TYPE LAMP RECEPTACLE CASING |
754 | | METALLIC CLAMP-TYPE CONNECTOR FOR STORAGE BATTERY TERMINAL |
755 | | . For threaded-receptacle type terminal flush with battery wall (e.g., for side terminal type battery) |
756 | | . Common securing means for post and conductor |
757 | | . With clamp-to-post joint separator |
758 | | . . Clamp secured to and separated from post by same screw-threaded member |
759 | | . Spring-actuated or resilient clamp |
760 | | . With reinforcing insert |
761 | | . Deformable C- or U-clamp |
762 | | . . Screw-thread operated |
763 | | . . . With plural conductor terminals |
764 | | . . . With means for removably securing conductor thereto |
765 | | . Screw-thread operated |
766 | | . . Screw or nut coaxial with post |
767 | | . . Post between and transverse of plural screws |
768 | | . . Eye bolt type |
769 | | . . Clamping lever |
770 | | . . Clamping cam or wedge |
771 | | . . Screw axis intersects post axis (e.g., set screw) |
772 | | . Clamping lever, cam, or wedge |
773 | | . . Rotary or swinging cam |
774 | | . . Sliding wedge |
775 | | METALLIC CONNECTOR OR CONTACT HAVING MOVABLE OR RESILIENT SECURING PART |
776 | | . Stirrup type for simultaneously securing two spaced-apart locations along the length of a conductor thereto |
777 | | . Adjustable angular joint between separate connectors or conductor securing means |
778 | | . Externally threaded, bifurcated bolt for joining conductors having like cross-sectional shape |
779 | | . . With nut retainer |
780 | | . . With slidable conductive element between conductors |
781 | | . Bolt or screw between and transverse of parallel conductors |
782 | | . . With means to maintain assembly of clamp part and bolt or screw |
783 | | . Cam or wedge between conductors |
784 | | . Screw-threaded securing means coaxial with elongated conductors joined in axially aligned relationship |
785 | | . Parallel elongated conductors between and transverse of plural screws (e.g., U-bolt) |
786 | | . Resilient or spring-operated securing means joining plural conductors |
787 | | . . Conductors secured in duplicate receiving means |
788 | | . . . With helical spring |
789 | | . Hinged jaw type having alignable conductor receiving bores |
790 | | . Single operator for securing and joining plural conductors |
791 | | . . Single screw-threaded operator |
792 | | . . . Conductors secured in direct contact with one another |
793 | | . . . . Screw axis intersects axes of conductors joined parallel to one another |
794 | | . . . Conductors secured in duplicate receiving means |
795 | | . . . Screw-threaded operator circumferentially tensions flexible strap or band |
796 | | . Duplicate receiving means having independently operated securing means for joining plural conductors |
797 | | . . Screw-thread operated securing means for each receiving means |
798 | | . . . For joining three or more conductors |
799 | | . Circumferentially tensioned flexible strap or band |
800 | | . . Tensioning screw intersects longitudinal axis of encircled conductor |
801 | | . Screw-thread operated securing part |
802 | | . . Screw-threaded lamp-shell type contact having resilient or spring biased securing part |
803 | | . . C-clamp type |
804 | | . . Single conductor between and transverse of plural screws (e.g., U-bolt) |
805 | | . . Nut, bolt, or screw coaxial with elongated conductor |
806 | | . . Clamping lever |
807 | | . . With screw-thread operated cam or wedge |
808 | | . . With strand coiling or loop forming means |
809 | | . . With means confining strand or wire loop about screw |
810 | | . . Screw axis intersects conductor axis (e.g., set screw) |
811 | | . . . With movable clamp jaw between conductor and screw or nut (e.g., slidable follower) |
812 | | . . . . Clamp jaw movably secured to screw or nut |
813 | | . . . Captive screw or nut |
814 | | . . . Set screw type |
815 | | . . Screw or nut moves resilient or resiliently biased securing part |
816 | | . Spring actuated or resilient securing part |
817 | | . . Compression spring axis transverse of and intersecting conductor axis |
818 | | . . . Spring biases detent member to form snap-latch type securing part |
819 | | . . Separate spring means moves rigid nonresilent clamping part into securing condition |
820 | | . . . Spring biases slidable wedge-shaped or wedge-operated jaw |
821 | | . . . Socket connector having three or more annularly arranged duplicate grip elements |
822 | | . . . Hinged clamping part (i.e., clamping lever) |
823 | | . . . Socket or pin connector having small radially biased clamping or detenting element |
824 | | . . . Spring-biased butt contact |
825 | | . . Plug having means for resiliently engaging opposed interior surfaces of mating socket connector (e.g., banana plug) |
826 | | . . . Also having means for resiliently engaging exterior surfaces of the socket connector |
827 | | . . . Having separate resilent means extending externally around or outwardly through rigid plug body |
828 | | . . Having resilient clamping finger crossing plane of opposed clamping member while in clamping condition |
829 | | . . . Hand-grip type |
830 | | . . For receiving end contact of elongated fuselike component inserted transverse to longitudinal axis of component (e.g., fuse clip) |
831 | | . . . With contact rejection feature or adaptor |
832 | | . . . With movably attached user manipulated locking, contact retaining, or spring spreading means |
833 | | . . . With separate means to increase clamping pressure of spring clip |
834 | | . . Clamping pressure provided by cantilevered finger resiliently urged away from opposed clamping member |
835 | | . . With movably attached user manipulated means or having user grippable means for manually distorting resilient part |
836 | | . . . Slidably mounted cam or wedge locks or places resilient securing part into securing condition |
837 | | . . . . With additional spring means to operate slidable cam or wedge |
838 | | . . . Pivotally or rotatably mounted member locks or places securing part into securing condition |
839 | | . . With additional reinforcing spring means |
840 | | . . Helically coiled spring forms securing part |
841 | | . . . Adapted to receive elongated contact or conductor by insertion along axis passing through spring coils |
842 | | . . Socket adapted to receive push-pull-engaging elongated contact by insertion along longitudinal axis of contact |
843 | | . . . Having separate gripping spring means located within or extending into rigid socket body |
844 | | . . . . Adapted to be mounted to flat panel with longitudinal axis of socket perpendicular to plane of panel |
845 | | . . . . Adapted to receive thin blade contact (e.g., spade receiving) |
846 | | . . . . Separate spring means forms snap-latching detent |
847 | | . . . . Spring means mounted on exterior of and extends into rigid socket body |
848 | | . . . Having latching detent or means operated by mating contact to lock or manipulate resilient part |
849 | | . . . . Adapted to receive thin blade contact (e.g., spade receiving) |
850 | | . . . Resilient channel-like socket for receiving thin blade contact (e.g., spade receiving) |
851 | | . . . Socket comprises tubular body having resilient means for gripping inserted elongated contact (includes split or slotted tube) |
852 | | . . . . Having resilient cantilevered clamping finger located within tubular body |
853 | | . . . . . With means for mounting to flat panel |
854 | | . . . . Tubular socket perpendicular to wire-securing barrel (e.g., right-angle connector) |
855 | | . . . Socket perpendicular to wire-securing barrel (e.g., right-angle connector) |
856 | | . . . Having opposed cantilevered clamping fingers resiliently urged toward one another |
857 | | . . . . Allochiral cantilevered clamping fingers |
858 | | . . . Having cantilevered clamping finger resiliently urged toward rigid clamping jaw |
859 | | . . Adapted to resiliently engage end face and inner annular shoulder of headed terminal |
860 | | . . Comprising conductor-encircling resilient wire loop or comprising slotted or apertured resilient plate |
861 | | . . Having cantilevered clamping finger resiliently urged toward opposed clamping jaw |
862 | | . . Having cantilevered spring contact finger |
863 | | . Clamping cam or wedge |
864 | | . . Rotary or swinging |
865 | | METALLIC CONDUCTOR TERMINAL HAVING CONDUCTOR SHEATH ENGAGING MEANS |
866 | | . Pin or plug type terminal |
867 | | . Resilient or spring-biased socket or clip type terminal |
868 | | . Slotted or apertured disc or plate type terminal (e.g., ring terminal) |
869 | | METALLIC CONNECTOR OR CONTACT HAVING MEANS FOR SECURING TO INSULATION OTHER THAN CONDUCTOR SHEATH |
870 | | . Adapted to be secured by permanently bending or deforming metallic part |
871 | | . Adapted to be secured by resiliently biased part latching behind shoulder |
872 | | . . Latching part unitary with metallic connector or contact |
873 | | . Adapted to be secured by part resiliently gripping insulation |
874 | | METALLIC CONNECTOR OR CONTACT HAVING PART PERMANENTLY SECURED TO CONDUCTOR USING FUSED OR MOLDED MATERIAL |
875 | | . Having duplicate locations for permanently securing individual conductors thereto |
876 | | . Adapted to be secured to conductor formed on printed circuit board |
877 | | METALLIC CONNECTOR OR CONTACT ALSO HAVING SECURING PART ADAPTED TO BE CRIMPED, DEFORMED, OR BENT ONTO CONDUCTOR |
878 | | . Securing part crimped or bent onto looped end of wire conductor |
879 | | . Multipart assembly |
880 | | . Having duplicate receiving means for permanently securing individual conductors thereto |
881 | | . Wire conductor secured transverse to contact portion (e.g., right-angle connector) |
882 | | . Wire conductor secured within ferrule having series of preformed wire gripping means therein |
883 | | METALLIC CONNECTOR OR CONTACT COMPRISING A SLOTTED OR APERTURED DISC OR PLATE |
884 | | CONTACT TERMINAL |
885 | | . Strip of detachable contacts |
886 | | . Having treated (e.g., coated) surface or distinct contact surface layer |
887 | | . Of particular metal or alloy |
888 | | . Having provision for retaining to mating wire (e.g., wire wrap) |
889 | | . Having provision for retaining to mating contact |
890 | | . For functioning electrical component, (e.g., tube, lamp, fuse, spark plug, etc.) |
891 | | . Multipart contact prong |
892 | | DISTINCT COVERING MEANS |
893 | | . Covering functioning electrical component (e.g., tube, lamp, fuse, spark plug, etc.) |
894 | | MISCELLANEOUS |
| | ****************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ****************************** |
901 | | CONNECTOR HOOD OR SHELL |
902 | | . Angularly disposed contact and conductor |
903 | | . Special latch for insert |
904 | | . Multipart shell |
905 | | . . Axially joined sections |
906 | | . . Longitudinally divided |
907 | | CONTACT HAVING THREE CONTACT SURFACES, INCLUDING DIVERSE SURFACE |
908 | | CONTACT HAVING TWO CONTACT SURFACES FOR ELECTRICAL CONNECTION ON OPPOSITE SIDES OF INSULATIVE BODY |
909 | | MEDICAL USE OR ATTACHED TO HUMAN BODY |
910 | | OBSERVATION AIDE, E.G., TRANSPARENT MATERIAL, WINDOW IN HOUSING |
911 | | SAFETY, E.G., ELECTRICAL DISCONNECTION REQUIRED BEFORE OPENING HOUSING |
912 | | WITH TESTING MEANS |
913 | | CONDITION DETERMINING DEVICE, E.G., OXYGEN SENSOR, ACCELEROMETER, IONIZER CHAMBER, THERMOCOUPLE |
914 | | FOR FLASHBULB OR CAMERA (INCLUDING FLASH CUBE) |
915 | | AUXILIARY DEVICE FOR EXISTING PLUG |
916 | | ANTENNA |
917 | | ALARM CIRCUIT, E.G., WINDOW AFFIXED FOIL |
918 | | MULTILAMP VEHICLE PANEL |
919 | | FOR TREATMENT BY ELECTRICAL CURRENT, E.G., MAGNET OR BATTERY CHARGER, HEATER, WELDER, ETC. |
920 | | FOR INTERCONNECTING RIGID PIPELIKE BODIES, E.G., WAVE GUIDES |
921 | | TRANSFORMER BUSHING TYPE OR HIGH VOLTAGE UNDERGROUND CONNECTOR |
922 | | TELEPHONE SWITCHBOARD PROTECTOR |
923 | | SEPARATION OR DISCONNECTION AID |
924.1 | | CONTACTS ARRANGED FOR SEQUENTIAL CONNECTION |
924.2 | | . With contact preventer to require joining in a given sequence |
925 | | FLOOR MOUNTED, E.G., UNDER CARPET |
926 | | WITHIN MACHINE CASING OR MOTOR HOUSING (CONNECTOR WITHIN CASING WALL) |
927 | | CONDUCTIVE GASKET |
928 | | MODULAR ELECTRICALLY INTERENGAGING PARTS, E.G., STOVE WITH REPLACEABLE HEATING ELEMENTS FORMED ON COUPLING PARTS |
928.1 | | . Plug-in carrier or adapter for removable component (e.g., "hard drive" for computer) |
929 | | CONNECTING BASE PLATE OR SHELF TYPE HOLDER |
930 | | COUPLING PART WHEREIN CONTACT IS COMPRISED OF A WIRE OR BRUSH |
931 | | CONDUCTIVE COATING |
932 | | HEAT SHRINK MATERIAL |
933 | | SPECIAL INSULATION |
934 | | . High voltage barrier (e.g., surface arcing or corona preventing insulator) |
935 | | . Glass or ceramic contact pin holder |
936 | | . Potting material or coating (e.g., grease, insulative coating, sealant or, adhesive) |
937 | | . Plural insulators in strip form |
938.1 | | CATHODIC PROTECTION OF STRUCTURE (E.G., SHIP HULL) |
939 | | WITH GROUNDING TO METAL MOUNTING PANEL |
940 | | INCLUDING PROVISION FOR MECHANICAL LIFTING OR MANIPULATION (E.G., FOR VACUUM LIFTING) |
941 | | CROSSTALK SUPPRESSION |
942 | | COMBLIKE RETAINER FOR CONDUCTOR |
943 | | INCLUDING PROVISION FOR PRESSING CONTACT INTO PCB HOLE |
944 | | COAXIAL CONNECTOR HAVING CIRCUIT-INTERRUPTING PROVISION EFFECTED BY MATING OR HAVING "DEAD" CONTACT ACTIVATED AFTER MATING |
945 | | ADAPTER FOR PCB OR CARTRIDGE |
946 | | MEMORY CARD CARTRIDGE |
947 | | PCB MOUNTED CONNECTOR WITH GROUND TERMINAL |
948 | | CONTACT OR CONNECTOR WITH INSERTION DEPTH LIMITER |
949 | | JUNCTION BOX WITH BUSBAR FOR PLUG-SOCKET TYPE INTERCONNECTION WITH RECEPTACLE |
950 | | ELECTRICAL CONNECTOR ADAPTED TO TRANSMIT ELECTRICITY TO MATING CONNECTOR WITHOUT PHYSICAL CONTACT (E.G., BY INDUCTION, MAGNETISM, OR ELECTROSTATIC FIELD) |
951 | | PCB HAVING DETAILED LEADING EDGE |
952 | | JUMPER FOR USE WITH SPECIFIC APPARATUS |
953 | | WITH LATCH ROD TO BE RETAININGLY RECEIVED BY OPENING OF MATING CONNECTOR |
954 | | SPECIAL ORIENTATION OF ELECTRICAL CONNECTOR |
955 | | INCLUDING ELECTRONIC IDENTIFIER OR CODING MEANS |
956 | | WITH MEANS TO ALLOW SELECTION OF DIVERSE VOLTAGE OR POLARITY |
957 | | AUXILIARY CONTACT PART FOR CIRCUIT ADAPTATION |