Subclass |
| Title |
ClassTitle
|
| ===>
DYNAMIC MAGNETIC INFORMATION STORAGE OR RETRIEVAL
|
| | |
| | This Class 360 is considered to be an integral part of Class 369 (see the Class 369 schedule for the position of this Class in schedule hierarchy). This Class retains all pertinent definitions and class lines of Class 369. |
1 | | RECORDING ON OR REPRODUCING FROM AN ELEMENT OF DIVERSE UTILITY |
2 | | . Card |
3 | | . Motion picture film |
4 | | MANUAL INPUT RECORDING |
5 | | RECORDING FOR SELECTIVE RETENTION OF A SPECIAL OCCURRENCE |
6 | | RECORDING COMBINED WITH METERING OR SENSING |
7 | | RECORDING FOR MONETARY DELAY OF AN ANALOG SIGNAL |
8 | | RECORDING FOR CHANGING DURATION, FREQUENCY OR REDUNDANT CONTENT OF AN ANALOG SIGNAL |
12 | | RECORDING OR REPRODUCING FOR AUTOMATIC ANNOUNCING |
13 | | RECORD EDITING |
15 | | RECORD COPYING |
16 | | . Contact transfer |
17 | | . . With magnetic bias |
18 | | RECORDING OR REPRODUCING PLURAL INFORMATION SIGNALS ON THE SAME TRACK |
20 | | . Frequency multiplex |
21 | | . Head gap azimuth multiplex |
22 | | SPLITTING ONE INFORMATION SIGNAL FOR RECORDING ON PLURAL DISTINCT TRACKS OR REPRODUCING SUCH SIGNAL |
23 | | . Time division |
24 | | SPLITTING, PROCESSING AND RECOMBINING ONE INFORMATION SIGNAL FOR RECORDING OR REPRODUCING ON THE SAME TRACK |
25 | | CHECKING RECORD CHARACTERISTICS OR MODIFYING RECORDING SIGNAL FOR CHARACTERISTIC COMPENSATION |
26 | | ELECTRONICALLY CORRECTING PHASING ERRORS BETWEEN RELATED INFORMATION SIGNALS |
27 | | RECORDING OR REPRODUCING AN INFORMATION SIGNAL AND A CONTROL SIGNAL FOR CONTROLLING ELECTRONICS OF REPRODUCER |
28 | | . Reference carrier to control demodulator |
29 | | MODULATING OR DEMODULATING |
30 | | . Frequency |
31 | | MONITORING OR TESTING THE PROGRESS OF RECORDING |
32 | | CONVERTING AN ANALOG SIGNAL TO DIGITAL FORM FOR RECORDING; REPRODUCING AND RECONVERTING |
39 | | GENERAL PROCESSING OF A DIGITAL SIGNAL |
40 | | . In specific code or form |
41 | | . . Nonreturn to zero |
42 | | . . Phase code |
43 | | . . Multi-frequency |
44 | | . . Intra-cell transition |
45 | | . Pulse crowding correction |
46 | | . Head amplifier circuit |
47 | | . Redundant or complimentary tracks |
48 | | . Data in specific format |
49 | | . Address coding |
50 | | . Inter-record gap processing |
51 | | . Data clocking |
52 | | . . With incremental movement between record and head |
53 | | . Data verification |
54 | | . Data recirculation |
55 | | GENERAL RECORDING OR REPRODUCING |
57 | | . Selective erase recording |
58 | | . Boundary displacement recording or transducers |
59 | | . Thermomagnetic recording or transducers |
60 | | . Recording-or erasing-prevention |
61 | | . Signal switching |
62 | | . . Record-reproduce |
63 | | . . Between plural stationary heads |
64 | | . . Between heads in alternate engagement with medium |
65 | | . Specifics of equalizing |
66 | | . Specifics of biasing or erasing |
67 | | . Specifics of the amplifier |
68 | | . . Recording amplifier |
69 | | AUTOMATIC CONTROL OF A RECORDER MECHANISM |
70 | | . Synchronizing moving-head moving-record recorders |
71 | | . Controlling the record |
72.1 | | . . Locating specific areas |
72.2 | | . . . Responsive to recorded address |
72.3 | | . . . Responsive to tape transport |
73.01 | | . . Speed |
73.02 | | . . . Control of relative speed between carriers |
73.03 | | . . . Rotary carrier |
73.04 | | . . . Linear carrier |
73.05 | | . . . . Plural speed transport |
73.06 | | . . . . . Automatic change between fixed speeds |
73.07 | | . . . . . Automatic selection of carrier or track speed |
73.08 | | . . . . . Variable speed |
73.09 | | . . . . Constant speed |
73.11 | | . . . . . By reproduced control signal and transport derived signal |
73.12 | | . . . . . By reproduced control signal |
73.13 | | . . . . . . From separate track |
73.14 | | . . . . . By signal derived from transport |
74.1 | | . . Stopping or reversing |
74.2 | | . . . Responsive to reel rotation |
74.3 | | . . . Responsive to tape tension |
74.4 | | . . . Responsive to magnetic recorded signals |
74.5 | | . . . Responsive to physical property of record |
74.6 | | . . . . Photoelectric |
74.7 | | . . . . Conductive |
75 | | . Controlling the head |
76 | | . . Azimuth or skew |
77.01 | | . . Track centering |
77.02 | | . . . Rotary carrier |
77.03 | | . . . . By nonmagnetic sensing (e.g., optical, capacitive) |
77.04 | | . . . . By memory storage of repeatable error or correction |
77.05 | | . . . . By servo signal component from carrier surface separate from information signal bearing surface |
77.06 | | . . . . Reproduced data signal used for tracking |
77.07 | | . . . . By tracking signal recorded on or immediately beneath surface |
77.08 | | . . . . . Distinct servo sector |
77.11 | | . . . . . Continuous servo signal |
77.12 | | . . . Elongated web carrier (i.e., tape) |
77.13 | | . . . . Transverse scan path |
77.14 | | . . . . . By pilot signal |
77.15 | | . . . . . . Plural pilot signals along single transverse path |
77.16 | | . . . . . Having head deflection drive (e.g., piezoelectric bimorph) |
77.17 | | . . . . . . Dithering |
78.01 | | . . Track changing |
78.02 | | . . . Tape |
78.03 | | . . . . Plural tapes |
78.04 | | . . . For rotary carrier (e.g., disc) |
78.05 | | . . . . Coarse and fine head drive motors |
78.06 | | . . . . Specified velocity pattern during access |
78.07 | | . . . . . Controlled by memory device |
78.08 | | . . . . Specified spatial pattern during access |
78.09 | | . . . . Including model of servo system or element |
78.11 | | . . . . Including nonmagnetic position sensing |
78.12 | | . . . . Including particular head actuator |
78.13 | | . . . . . Stepping motor |
78.14 | | . . . . By recorded servo reference or address signal |
78.15 | | . . . . Drum |
79 | | RECORDER CONTROL OF AN EXTERNAL DEVICE |
80 | | . Slide or movie projectors |
81 | | RECORD TRANSPORT WITH HEAD MOVING DURING TRANSDUCING |
82 | | . Belt record |
83 | | . Tape record |
84 | | . . Rotating head |
85 | | . . . Tape in container |
86 | | . Disk record |
87 | | . Drum record |
88 | | RECORD TRANSPORT WITH HEAD STATIONARY DURING TRANSDUCING |
89 | | . Wire record |
90 | | . Tape record |
91 | | . . Plural tapes |
92 | | . . . Tape in container |
93 | | . . Tape in container |
94 | | . . . Transport accommodates different types |
95 | | . . . With tape extraction |
96.1 | | . . . Plural reels |
96.2 | | . . . . With dual capstan drive |
96.3 | | . . . . Reel drive details |
96.4 | | . . . . . With common capstan drive |
96.5 | | . . . . Container mounting details |
96.6 | | . . . . . With pivotal holder |
97.01 | | . Disk record |
97.02 | | . . Environmental control (e.g., air filter, temperature control) |
97.03 | | . . . Plural disks |
97.04 | | . . . Flexible disk |
98.01 | | . . Plural disks |
98.02 | | . . . Axially fixed flexible disks |
98.03 | | . . . . With pneumatic partioning of disks |
98.04 | | . . . Changer |
98.05 | | . . . . Control detail |
98.06 | | . . . . Mechanical detail |
98.07 | | . . . Rotational drive detail |
98.08 | | . . . Seating of disks |
99.01 | | . . Flexible disk |
99.02 | | . . . Loading or ejecting mechanism |
99.03 | | . . . . Motorized |
99.04 | | . . . Rotational drive detail |
99.05 | | . . . Disk seating |
99.06 | | . . Loading or ejecting mechanism |
99.07 | | . . . Motorized |
99.08 | | . . Rotational drive detail |
99.09 | | . . . Movable drive |
99.11 | | . . . Stationary drive |
99.12 | | . . Disk seating |
100.1 | | . Drum record |
101 | | HEAD TRANSPORT WITH RECORD STATIONARY DURING TRANSDUCING |
220 | | FLUID BEARING RECORD SUPPORT |
221 | | . Tape record |
221.1 | | . . Liquid bearing |
224 | | . Disk record |
230 | | FLUID BEARING HEAD SUPPORT |
231 | | . Tape record |
234 | | . Disk record |
234.1 | | . . Liquid bearing |
234.2 | | . . Flexible disk |
234.3 | | . . Air bearing slider detail |
234.4 | | . . . IC/circuit component on slider |
234.5 | | . . . Electrical attachment of slider/head |
234.6 | | . . . Mechanical attachment of slider to its support |
234.7 | | . . . Head attachment to slider |
234.8 | | . . . . On/in side of slider |
234.9 | | . . . . In slot of rail |
235 | | . . . . Signal winding mount/access detail |
235.1 | | . . . Slider material |
235.2 | | . . . . Rail material |
235.3 | | . . . . Body material |
235.4 | | . . . Air bearing surface detail |
235.5 | | . . . . Negative pressure type |
235.6 | | . . . . . Leading end detail |
235.7 | | . . . . . Trailing end detail |
235.8 | | . . . . . Rail surface detail |
235.9 | | . . . . . Rail side edge detail |
236 | | . . . . . Cross rail detail |
236.1 | | . . . . . Varying width rail |
236.2 | | . . . . . Asymmetrical rail arrangement |
236.3 | | . . . . . Three or more rails/pads |
236.4 | | . . . . Leading end detail |
236.5 | | . . . . Trailing end detail |
236.6 | | . . . . Rail surface detail |
236.7 | | . . . . Rail side edge detail |
236.8 | | . . . . Varying width rail |
236.9 | | . . . . Asymmetrical rail arrangement |
237 | | . . . . Three or more rails/pads |
237.1 | | . . . . Partial contact |
240 | | HEAD MOUNTING |
250 | | . For moving head into/out of transducing position |
251 | | . . Tape record having arcuate head retraction movement |
251.1 | | . . Tape record having linear head retraction movement |
251.2 | | . . . Driven by tape driver |
251.3 | | . . . Cam type |
251.4 | | . . . Solenoid type |
251.5 | | . . . Rotary head type |
254 | | . . Disk record |
254.1 | | . . . Flexible disk |
254.2 | | . . . Arcuate track change type |
254.3 | | . . . . Moving lifter |
254.4 | | . . . . . Lifter surface detail |
254.5 | | . . . . . Adjustment detail |
254.6 | | . . . . . Actuator side detail |
254.7 | | . . . . Fixed lifter |
254.8 | | . . . . . Lifter surface detail |
254.9 | | . . . . . Adjustment detail |
255 | | . . . . . Actuator side detail |
255.1 | | . . . Linear track change type |
255.2 | | . . . . Moving lifter |
255.3 | | . . . . . Lifter surface detail |
255.4 | | . . . . . Adjustment detail |
255.5 | | . . . . . Actuator side detail |
255.6 | | . . . . Fixed lifter |
255.7 | | . . . . . Lifter surface detail |
255.8 | | . . . . . Adjustment detail |
255.9 | | . . . . . Actuator side detail |
256 | | . . . Latch |
256.1 | | . . . . Air vane |
256.2 | | . . . . Magnetic |
256.3 | | . . . . Electrically driven |
256.4 | | . . . . Inertial |
256.5 | | . . . . Plural latches |
256.6 | | . . . . Adjustment detail |
260 | | . For shifting head between tracks |
261 | | . . Tape record having rotary head movement |
261.1 | | . . Tape record having linear head movement |
261.2 | | . . . Cam |
261.3 | | . . . Screw |
264 | | . . Disk record |
264.1 | | . . . Arcuate head movement |
264.2 | | . . . . Electrical connection detail onto actuator arm |
264.3 | | . . . . Driver detail |
264.4 | | . . . . . Independent head movement |
264.5 | | . . . . . Plural drivers for each head |
264.6 | | . . . . . Band |
264.7 | | . . . . . Voice coil |
264.8 | | . . . . . . Core detail |
264.9 | | . . . . . . Magnet detail |
265 | | . . . . . . Winding detail |
265.1 | | . . . . Limiter/stop |
265.2 | | . . . . Bearing |
265.3 | | . . . . . Seal |
265.4 | | . . . . . Radial |
265.5 | | . . . . . Thrust |
265.6 | | . . . . . Mounting detail |
265.7 | | . . . . E block detail |
265.8 | | . . . . . Detail of coil support |
265.9 | | . . . . . Detail of actuator arm supporting head suspension |
266 | | . . . . . . Arm shape |
266.1 | | . . . . . . Arm mounting |
266.2 | | . . . Linear head movement |
266.3 | | . . . . Electrical connection detail onto actuator arm |
266.4 | | . . . . Voice coil |
266.5 | | . . . . . Carriage detail |
266.6 | | . . . . . . Guide detail |
266.7 | | . . . . . Core detail |
266.8 | | . . . . . Magnet detail |
266.9 | | . . . . . Winding detail |
267 | | . . . . Band |
267.1 | | . . . . Cam |
267.2 | | . . . . Rack |
267.3 | | . . . . Screw |
267.4 | | . . . . . Screw/follower detail |
267.5 | | . . . . . Carriage detail |
267.6 | | . . . . . . Guide detail |
267.7 | | . . . . . Screw mount detail |
267.8 | | . . . . . . Adjustable |
267.9 | | . . . Including shifting head to different disks |
270 | | . For moving head during transducing |
271 | | . . Tape record having rotary head |
271.1 | | . . . Rotating drum |
271.2 | | . . . . Axle bearing |
271.3 | | . . . . . Hydrodynamic |
271.4 | | . . . . Axle seal |
271.5 | | . . . . Head mount to drum |
271.6 | | . . . . Drum mounting |
271.7 | | . . . . Drum motor |
271.8 | | . . . Stationary drum |
271.9 | | . . . . Electrical connection detail |
272 | | . . . Power supply |
281 | | . . . Signal transfer to/from head |
281.1 | | . . . . Transformer mounting detail |
281.2 | | . . . . Transformer axis parallel to axis of head rotation |
281.3 | | . . . . Transformer axis perpendicular to axis of head rotation |
281.4 | | . . . . Coil/winding detail |
281.5 | | . . . . Core detail |
281.6 | | . . . . Electrical or magnetic shielding |
281.7 | | . . . . Electrical connection between head and rotary part of transformer |
281.8 | | . . . . Plural transformers |
281.9 | | . . . . Photoelectric |
282 | | . . . . Contact type transformer |
274 | | . . Disk record |
290 | | . For adjusting head position |
291 | | . . Tape record |
291.1 | | . . . Cam adjuster |
291.2 | | . . . Screw adjuster |
291.3 | | . . . . Plural screws |
291.4 | | . . . Rotary head |
291.5 | | . . . . Adjustment of drum axis |
291.6 | | . . . . Adjustable head mount |
291.7 | | . . . . . Adjuster core detail |
291.8 | | . . . . . Adjuster coil detail |
291.9 | | . . . . . Piezoelectric adjuster |
292 | | . . . . . . Plural piezoelectric adjusters |
294 | | . . Disk record |
294.1 | | . . . Adjustment parallel to disk plane |
294.2 | | . . . . Linear adjustment |
294.3 | | . . . . Driver detail |
294.4 | | . . . . . Piezoelectric adjuster |
294.5 | | . . . . . Voice coil adjuster |
294.6 | | . . . . Pivot structure detail |
294.7 | | . . . Adjustment along rotational axis of disk |
241 | | . Tape record |
241.1 | | . . Plural head mounting on only one tape side |
241.2 | | . . Plural head mounting on opposite tape sides |
241.3 | | . . Head urging detail |
244 | | . Disk record |
244.1 | | . . IC/circuit component on suspension element |
244.2 | | . . Load beam detail |
244.3 | | . . . Laminated beam |
244.4 | | . . . Nonmetallic beam |
244.5 | | . . . Actuator mount region detail |
244.6 | | . . . . Ball staking |
244.7 | | . . . . Adhesive |
244.8 | | . . . Spring region detail |
244.9 | | . . . Rigid intermediate section detail |
245 | | . . . Gimbal mounting region detail |
245.1 | | . . . . Pivot/load button detail |
245.2 | | . . . Assembly feature |
245.3 | | . . Gimbal detail |
245.4 | | . . . Attachment detail |
245.5 | | . . . Integral with load beam |
245.6 | | . . . Plural axis components |
245.7 | | . . . Motion limiter detail |
245.8 | | . . Electrical connection detail |
245.9 | | . . . Flexible printed circuit type |
246 | | . . . Noise reduction |
246.1 | | . . Full contact suspension |
246.2 | | . . . Slider detail |
246.3 | | . . . Pivot detail |
246.4 | | . . . Gimbal detail |
246.5 | | . . . Single head |
246.6 | | . . Plural heads for each disk side |
246.7 | | . . . Plural actuators |
246.8 | | . . Offset heads on opposite sides of disk |
110 | | HEAD |
111 | | . Flux gate |
112 | | . Hall effect |
313 | | . Magnetoresistive (MR) reproducing head |
314 | | . . Having multiple interconnected multiple film MR sensors (e.g., dual spin valve magnetoresistive sensor) |
315 | | . . Having multiple interconnected single film MR sensors (e.g., dual magnetoresistive sensor) |
316 | | . . Having multiple independent MR sensors |
317 | | . . Combined with inductive write head in piggyback/merged configuration |
318 | | . . Combined with inductive write head and having MR inside of inductive head |
318.1 | | . . . In horizontal head configuration |
319 | | . . Detail of magnetic shielding |
320 | | . . Detail of head insulation |
321 | | . . Having flux guide detail |
322 | | . . Detail of sense conductor |
323 | | . . Electrostatic Discharge (ESD) protection |
324 | | . . Having Giant Magnetoresistive (GMR) or Colossal Magnetoresistive (CMR) sensor formed of multiple thin films |
324.1 | | . . . Having one film pinned (e.g., spin valve) |
324.11 | | . . . . Detail of pinned film or additional film for affecting or biasing the pinned film |
324.12 | | . . . . Detail of free layer or additional film for affecting or biasing the free layer |
324.2 | | . . . Having tunnel junction effect |
325 | | . . Having Anisotropic Magnetoresistive (AMR) sensor formed of multiple thin films |
326 | | . . Having Giant Magnetoresistive (GMR) or Colossal Magnetoresistive (CMR) sensor formed of a single thin film |
327 | | . . Having Anisotropic Magnetoresistive (AMR) sensor formed of a single thin film |
327.1 | | . . . Detail of transverse and longitudinal biasing |
327.11 | | . . . . In barber-pole configuration |
327.2 | | . . . Detail of transverse biasing |
327.21 | | . . . . Using a shunt |
327.22 | | . . . . Using a soft adjacent layer |
327.23 | | . . . . Using a permanent magnet |
327.24 | | . . . . Using conductor |
327.3 | | . . . Detail of longitudinal biasing |
327.31 | | . . . . Using a permanent magnet |
327.32 | | . . . . Using exchange couple biasing |
327.33 | | . . . . Using conductor |
328 | | . Magnetostrictive head |
114 | | . Magneto-optic |
115 | | . Flux scanning |
116 | | . Cathode ray |
117 | | . Hand-held |
118 | | . Erase |
119 | | . Gap structure details |
120 | | . . Spacer material |
121 | | . . Plural gaps |
122 | | . Head surface structure |
123 | | . Head winding |
124 | | . . For cross-talk prevention |
125 | | . Head core |
126 | | . . Laminated |
127 | | . . Nonmetallic |
128 | | . Head accessory |
129 | | . . Housing |
130.1 | | . . Record separator |
130.2 | | . . Record guide |
130.21 | | . . . Tape record |
130.22 | | . . . . Rotating head |
130.23 | | . . . . . Helical scan |
130.24 | | . . . . . . Head drum details |
130.3 | | . . Pressure element |
130.31 | | . . . Tape record |
130.32 | | . . . . Element mounting details |
130.33 | | . . . . Element in tape container |
130.34 | | . . . Disc record |
131 | | RECORD MEDIUM |
132 | | . In container |
133 | | . . For disk |
134 | | . Tape |
135 | | . Disk |
136 | | . Drum |
137 | | MISCELLANEOUS |
| | ******************************* |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ******************************* |
900 | | DISK DRIVE PACKAGING |
901 | | . Access time |
902 | | . Storage density (e.g., bpi, tpi) |
903 | | . Physical parameter (e.g., form factor) |
904 | | . . Weight |
| | ********************************* |
| | FOREIGN ART COLLECTIONS |
| | ********************************* |
| | Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collection listed below. These collections contain ONLY foreign patents or nonpatent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived. |
FOR 202 | | FLUID BEARING HEAD (360/102) |
FOR 203 | | . Flying head (360/103) |
FOR 204 | | HEAD MOUNTING (360/104) |
FOR 205 | | . For moving head into and out of transducing position (360/105) |
FOR 206 | | . For shifting head between tracks (360/106) |
FOR 207 | | . For moving head during transducing (360/107) |
FOR 208 | | . . Signal transfer to and from head (360/108) |
FOR 209 | | . For adjusting head position (360/109) |
FOR 213 | | MAGNETORESISTIVE OR MAGNETOSTRICTIVE HEAD (360/113) |