Subclass |
| Title |
ClassTitle
|
| ===>
CHUCKS OR SOCKETS
|
| | |
2.01 | | EXPANDING |
2.02 | | . Collet type |
2.03 | | . . Fixed jaws and moving cam |
2.04 | | . . Fixed cam and moving jaws |
2.05 | | . Jaws mounted on flexible member; i.e., diaphragm |
2.06 | | . Fluid-pressure actuator |
2.07 | | . . Directly expanding jaws |
2.08 | | . . . Jaw is expansible chamber; i.e., bladder type |
2.09 | | . . Expanding jaws via mechanical connection |
2.1 | | . Axially moving actuator |
2.11 | | . . Wedge |
2.12 | | . . . Internal cone |
2.13 | | . . . With jaw positively interlocked with wedge; e.g., dovetail or T-slot |
2.14 | | . . . With resilient means contacting nonresilient jaw |
2.15 | | . . . . Constricting band, annulus, or clip |
2.16 | | . . Toggle |
2.17 | | . . Axially compressible element expands radially |
2.18 | | . . Lever |
2.19 | | . Rotary actuator |
2.2 | | . . Clutch or self-actuating type |
2.21 | | . Jaw structure |
2.22 | | . . Resilient |
2.23 | | . . Ball or roller |
2.24 | | . . Pivoted |
3 | | VACUUM |
4.01 | | WITH FLUID-PRESSURE ACTUATOR |
4.02 | | . With measuring, indicating or control means |
4.03 | | . Jaw is expansible chamber; i.e., bladder type |
4.04 | | . Pneumatic type |
4.05 | | . Jaws mounted on flexible member; i.e., diaphragm |
4.06 | | . Socket type |
4.07 | | . . Collet |
4.08 | | . . . Fixed cam and moving jaws |
4.09 | | . . . Moving cam and fixed jaws |
4.1 | | . Radially reciprocating jaws |
4.11 | | . . Fluid pressure directly moves jaws |
4.12 | | . . Fluid pressure moves jaws via mechanical connection |
5 | | ANGULARLY ADJUSTABLE OR INDEXING |
6 | | ECCENTRIC |
7 | | THREADED GRIP |
8 | | LONGITUDINAL SCREW CLAMP |
9.1 | | SOCKET TYPE |
14 | | . Multiple alternative |
16 | | . Self-centering of floating |
17 | | . . Radially reciprocating jaws |
18 | | . . Transverse holder and setscrew |
19 | | . Lost motion |
19.1 | | . . Swinging external yoke or detent |
19.2 | | . . . Rotary socket |
19.3 | | . . Rotary socket |
19.4 | | . . Spreading elements |
19.5 | | . . Key retainer |
19.6 | | . . Sleeve type retainer |
19.7 | | . . . Sleeve in socket |
20 | | . Fluid-conduit drill holding |
20.1 | | . Feed type |
| | . Self-grasping |
| | . . Yielding grasping jaws |
22 | | . . . Ball or roller |
23.1 | | . . . Spring jaws |
24 | | . . Yielding detent |
| | . . One-way-clutch type |
28 | | . . . Wedge |
29 | | . . . Side detent |
30 | | . . . . Ball or roller |
32 | | . Conical clamp threaded in socket |
33 | | . Transversely oscillating jaws |
34 | | . . Screw actuated |
35 | | . Pivoted jaws |
| | . . Moving-cam actuator |
36 | | . . . Threaded cam sleeve |
37 | | . . . Reciprocating cam sleeve |
38 | | . . Fixed cam and moving jaws |
39 | | . . . Axial screw actuator |
40 | | . . . Threaded-sleeve actuator |
| | . Resilient split socket |
42 | | . . Threaded cam sleeve |
43 | | . . Reciprocating cam sleeve |
43.1 | | . . Unitary |
43.2 | | . . . Split at one end only |
43.3 | | . . . . Transverse screw actuator |
43.4 | | . . . . Cam actuator |
43.5 | | . . . Split end to end |
43.6 | | . . . With jaw pads or insert |
43.7 | | . . Nonresilient member biased by a resilient member |
43.8 | | . . Resilient member reinforced by another resilient member |
43.9 | | . With means to exclude contaminants; e.g., seal, shield |
44 | | . One movable side |
45 | | . . Sleeved |
46.1 | | . Spring biased jaws |
46.2 | | . . Unitary |
46.3 | | . . . Split at one end only |
46.4 | | . . . Split at both ends |
46.5 | | . . . Split end to end |
46.6 | | . . . With jaw pads or insert |
46.7 | | . . Nonresilient member biased by a resilient member |
46.8 | | . . Resilient member reinforced by another resilient member |
46.9 | | . . With means to exclude contaminants; e.g., seal, shield |
| | . . Moving-cam actuator |
47 | | . . . Threaded sleeve and wedge |
48 | | . . . Threaded cam sleeve |
49 | | . . . . Loose jaws |
50 | | . . . Reciprocating cam sleeve |
51 | | . . Fixed cam and moving jaws |
52 | | . . . Threaded-sleeve actuator |
53 | | . . . Axial screw actuator |
54 | | . . Loose jaws |
55 | | . Loose jaws |
| | . . Moving-cam actuator |
56 | | . . . Threaded cam sleeve |
57 | | . . . Reciprocating cam sleeve |
58 | | . . Fixed cam and moving jaws |
59 | | . . . Threaded sleeve and body |
60 | | . Obliquely guided reciprocating jaws |
61 | | . . Threaded sleeve and jaw |
62 | | . . . Conical sleeve |
63 | | . . Threaded central cone and jaw |
64 | | . . Threaded sleeve and body |
65 | | . . Reciprocating jaw advancing sleeve |
66 | | . Radially reciprocating jaws |
67 | | . . Transverse-screw actuated |
68 | | . . . Interlaced jaws |
| | . . Moving-cam actuator |
69 | | . . . Threaded cam sleeve |
70 | | . . . Threaded sleeve and wedge |
71 | | . . . Rotary eccentric-cam sleeve |
72 | | . . . . Roller and rocking jaw |
73 | | . . . . Worm actuated |
74 | | . . . Reciprocating cam sleeve |
75 | | . . . . Ball or roller jaws |
76 | | . Side detent |
77 | | . . Pivoted or rotary |
78 | | . . . Sleeved |
79 | | . . Spring |
80 | | . . . Sleeved |
81 | | . . Rotary cam sleeve |
82 | | . . Reciprocating sleeve |
83 | | . . Set screw |
84 | | . . U-clamp |
85 | | . . Plural bolt |
86 | | . . Single transverse bolt |
87 | | . . Longitudinal clamping wedge |
89 | | . Shouldered-tang holding |
90 | | . . Cap |
91 | | . . . Screw |
93 | | . Tang offset within socket |
94 | | . Tang offset without socket |
95 | | . Bottomless |
96 | | . . Friction grip |
97 | | . Transverse pin |
99 | | . Screw threaded |
100 | | . . Nut lock |
101 | | . . . Threaded sleeve |
102 | | . Friction grip |
103 | | . . Drill type |
104 | | . Barbed or pronged tang |
105 | | . Molded or cast-in tang |
105.1 | | . Adjustable length or size |
106 | | PIVOTED JAW |
107 | | . Cam-sleeve actuated |
108 | | . Internal-cone actuated |
109 | | . Toggle actuated |
110 | | RADIALLY RECIPROCATING JAWS |
111 | | . With indicator |
112 | | . Transverse-screw actuated |
113 | | . . Annular rack |
114 | | . Spiral cam or scroll actuated |
115 | | . . Worm |
116 | | . . Bevel pinion |
117 | | . Rack-and-pinion actuated |
118 | | . Toggle actuated |
119 | | . Lever actuated |
120 | | . . Internal cone |
121 | | . Wedge actuated |
122 | | . External-cone actuated |
123 | | . Jaws |
124 | | . . With means to facilitate jaw removal |
125 | | WITH SAFETY FEATURE |
126 | | WITH MEASURING, INDICATING OR CONTROL MEANS |
127 | | DOUBLE ACTING |
128 | | WITH MAGNETIC OR ELECTROSTATIC MEANS |
129 | | BY CENTRIFUGAL FORCE |
130 | | . To counterbalance jaws |
131 | | . To grip tool or workpiece |
132 | | COMPENSATION FOR ECCENTRICITY |
133 | | WITH CENTERING MEANS |
134 | | SEPARATE CHUCK-ACTUATING POWER SOURCE |
135 | | . Self-contained |
136 | | FOR GEAR OR SPLINE MOLDING |
137 | | MORE THAN ONE SET OF GRIPPING MEANS |
138 | | TORSION MANDREL |
139 | | JAWS MOUNTED ON FLEXIBLE MEMBER; I.E., DIAPHRAGM |
140 | | MEANS TO PREVENT JAW LOOSENING |
141 | | MEMBER APPLIES AXIAL FORCE COMPONENT |
142 | | ACCESSORY OR COMPONENT |
143 | | . Adapter |
144 | | . . Drive conversion |
145 | | . . For particular tool or workpiece |
146 | | . Sliding cam chuck actuator |
147 | | . Chuck key |
148 | | . . Safety feature; e.g., ejector, interlock |
149 | | . . Key holding or attaching means |
150 | | . . Nonseparable or built-in |
151 | | . Padded or cushioned jaw |
152 | | . Jaw insert |
153 | | . . Machinable jaw |
154 | | . . . Locking or positioning means |
155 | | . Tool or workpiece ejector |
156 | | . Tool or work stop or locator |
157 | | . Protection means; e.g., cover, seal, overstress prevention, air blast |
158 | | MISCELLANEOUS |
| | ****************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ****************************** |
900 | | ADAPTED FOR AUTOMATIC TOOL CHANGER |
901 | | CHUCK OR CHUCK JAW CHANGING MEANS |
902 | | KEYLESS TYPE SOCKET |
903 | | NEEDLE ROLLER TYPE SOCKET |
904 | | QUICK CHANGE SOCKET |
905 | | . With ball detent |
906 | | SELF GRASPING SOCKET |
907 | | WASHER TYPE JAW OR ACTUATOR |