Subclass |
| Title |
ClassTitle
|
| ===>
RECEPTACLES
|
| | |
560 | | FLOATING CONTAINER |
560.01 | | PUNCTURE OR FIRE RESISTANT CONTAINER |
560.02 | | . Container made of puncture healing material |
560.03 | | INCLUDING MEANS FOR LIMITING THE DISCHARGE OR SPREAD OF CONTENTS THROUGH AN UNLIMITED OPENING IN THE CONTAINER STRUCTURE (E.G., DOUBLE WALL, CATCH BASIN) |
560.04 | | FOR CRYOGENIC CONTENT (E.G., LIQUEFIED GAS) |
560.05 | | . Including means for withstanding or dissipating thermally induced stress (e.g., expansion joint) |
560.06 | | . . Expansible pleat, fold, corrugation, etc. |
560.07 | | . . For use with a transport vehicle (e.g., cargo ship, airplane, space vehicle) |
560.08 | | . Membrane-type container |
560.09 | | . Spherical or oblate container |
560.1 | | . Spaced, self-sustaining, inner and outer containers |
560.11 | | . Combined with, or modified for shipment in, a transport vehicle (e.g., cargo ship, airplane, space vehicle) |
560.12 | | . Including thermal insulation |
560.13 | | . . Including means for reflecting heat |
560.14 | | . . Including means for facilitating the formation of an insulating layer from gas vapors emitted by the cryogenic content |
560.15 | | . . Foam insulation |
561 | | CONTAINER HAVING RECONDITIONED OR RECONDITIONABLE END WALL |
562 | | VEHICLE MOUNTABLE TANK |
563 | | . With baffle |
564 | | . Compartmented |
565 | | STATIONARY TANK |
566 | | . Toroidal (i.e., doughnut shaped) |
567 | | . Elevated (e.g., municipal water tank) |
567.1 | | . Underground |
567.2 | | . For petroleum or a petroleum product (e.g., oil, gasoline) |
567.3 | | . For hot water heater or boiler |
568 | | COCKTAIL SHAKER |
569 | | MILK CAN |
570 | | PAINT TRAY |
571 | | DRAIN PAN OR DRIP PAN |
571.1 | | . With means to attach pan to bucket or paint can |
572 | | . With article drying support (e.g., dish-rack pan) |
573 | | . For a vehicle |
573.1 | | COOKWARE (E.G., POT, BAKING PAN) |
573.2 | | . Nonstick inner surface |
573.3 | | . With heat-resistant support for protecting an underlying supporting surface |
573.4 | | . Having removable inner container (e.g., double boiler) |
573.5 | | . . Two or more removable inner containers |
574 | | TABLE DISH (E.G., PLATE, BOWL, PLATTER, ETC.) |
574.1 | | . With eating aid |
574.2 | | . Including means for receiving a heat exchange medium (e.g., hot water, ice) |
574.3 | | . With liner |
575 | | . Compartmented table dish |
576 | | SMOKING STAND |
577 | | RIGID HEAT TRANSFER CONTAINER (I.E., HEAT IS CONDUCTED THROUGH CONTAINER WALL) |
1.5 | | FREIGHT CONTAINERS |
1.6 | | . Including inner bag liner |
2 | | COAL RECEPTACLES |
2.1R | | ENVELOPE FOR ELECTRIC LAMP OR SIMILAR DEVICE |
2.2 | | . With evacuating stem or valve |
2.3R | | . Partly of conducting material |
2.3A | | . . TV tube |
2.1A | | . TV tube |
578 | | INTERNAL CLOSURE-LIKE MEMBER WHICH RESTS ON THE UNUSED CONTENTS OF A CONTAINER |
579 | | . Foldable for insertion into a container |
580 | | . Vent means through closure-like member |
581 | | HIGH-PRESSURE-GAS TANK |
582 | | . With removable closure |
583 | | . With pierceable member |
584 | | . Having interconnected semi-spherical portions |
585 | | . Sequential container wall structure provides plural pressure differentials |
586 | | . Multilayer container |
587 | | . . With weep hole in outer layer |
588 | | . . Wound layer |
589 | | . . . Filament layer |
590 | | . . . . With bonding material |
591 | | . . . Tape layer |
592 | | . With separate reinforcing element |
592.01 | | RECEPTACLE HAVING MEANS TO FACILITATE MAINTAINING CONTENTS ABOVE OR BELOW AMBIENT TEMPERATURE (E.G., COMPARTMENT FOR HOLDING A HEAT EXCHANGE MEDIUM) |
592.02 | | . Ice-box, refrigerator, or freezer cabinet |
592.03 | | . . Portable cabinet |
592.04 | | . . For use in a commercial establishment (e.g., ice cream parlor) |
592.05 | | . . Spaced walls separated by a plurality of individual spacer elements |
592.06 | | . . Including a heat breaker strip |
592.07 | | . . . Separate fastening element for breaker strip |
592.08 | | . . . . Including a resilient fastening element (e.g., clip) |
592.09 | | . . Including thermal insulation |
592.1 | | . . . Foam insulation |
592.11 | | . . . Including means for reflecting heat |
592.12 | | . For a dairy product (e.g., for holding whole milk during a cooling and separating process) |
592.13 | | . . For holding cream during freezing process (i.e., in an ice cream freezer) |
592.14 | | . . Ice cream container |
592.15 | | . . Including a removable inner container |
592.16 | | . For a beverage |
592.17 | | . . Drinking vessel |
592.18 | | . . For use as, or as part of, a stationary beverage dispenser (e.g., water cooler, soda fountain) |
592.19 | | . . . Keg or barrel (e.g., for beer) |
592.2 | | . Thermally insulated receptacle |
592.21 | | . . Including means for reflecting heat |
592.22 | | . . For heated contents (e.g., fireless cooker) |
592.23 | | . . . Including a removable inner container |
592.24 | | . . Insulation forms removable outer jacket |
592.25 | | . . Foam insulation |
592.26 | | . . Multiple insulation layers |
592.27 | | . . Vacuum insulation |
592.28 | | . For use with a heated fluent medium (e.g., hot air, hot water, steam) |
3.2 | | OUTLET OR JUNCTION BOX TYPE |
3.3 | | . Wall, floor, or panel mounted |
3.4 | | . . Concrete, lath or plaster engaging means |
3.5 | | . . In opening |
3.6 | | . . . Opposed engaging means |
3.7 | | . With adjustable parts |
3.8 | | . With closure |
3.9 | | . With support |
3.92 | | . . Sectional receptacle |
3.94 | | . Sectional receptacle |
4.01 | | SECTIONAL |
4.02 | | . Electrical housing |
4.03 | | . Extension |
4.04 | | . Barrel-shaped container |
4.05 | | . . Formed of thermoplastic material |
4.06 | | . . Comprising only two similar cup-shaped sections |
4.07 | | . . . Separable sections |
4.08 | | . . Knockdown |
4.09 | | . . . Separable sidewall and end walls |
4.11 | | . . . . Sidewall formed of separable stave-like parts |
4.12 | | . Tank for fluids |
4.13 | | . . Formed of thermoplastic material |
4.14 | | . . Vehicular fuel tank |
4.15 | | . . . Removable aircraft fuel tank |
4.16 | | . . Knockdown |
4.17 | | . . . Bolted construction |
4.21 | | . Container formed of only two similar sections |
4.22 | | . . Sections hinged together |
4.23 | | . . . Hinge integral with sections |
4.24 | | . . Identical halves |
4.25 | | . . . Hemispherical sections |
4.26 | | . Stacked or aligned similar sections |
4.27 | | . . Sections are container units |
4.28 | | . Knockdown |
4.29 | | . . Sidewalls vertically hinged to each other |
4.31 | | . . Sidewalls slide vertically to engage each other |
4.32 | | . . Sidewall slides horizontally to engage the base |
4.33 | | . . Removable fastening element |
4.34 | | . . . Retaining pin extends through aligned openings in knuckle-like elements |
6 | | . Folding |
7 | | . . Fastening members |
8 | | . Telescoping |
9.1 | | FLACCID WALL MATERIAL PERMANENTLY UNITED WITH A SKELETAL FRAMEWORK |
9.2 | | . Collapsible or foldable framework |
9.3 | | . . Laterally collapsible or foldable |
9.4 | | FLACCID WALL MATERIAL REMOVABLY ATTACHED TO SKELETAL FRAMEWORK |
17.1 | | LEG OR LAP SUPPORTED |
17.2 | | . Bail ear engaging or integral therewith |
17.3 | | . With pail encircling band or ring |
475 | | POLE OR ROD SUPPORTED CONTAINER |
476 | | WALL SUPPORTED CONTAINER |
477 | | . Recessed wall mounting |
478 | | . Container pivotally attached |
479 | | . . Container pivots through or over the wall |
480 | | . Detachably supported container |
481 | | . . Separate support means secured to wall |
482 | | . . Container has hook means engaging wall upper edge |
483 | | . . Suction cup or magnetic support structure |
484 | | IN GROUND, NONTANK CONTAINER (E.G., METER BOX, GARBAGE CAN, ETC.) |
485 | | WIRE CONTAINER |
486 | | . Compartmented |
487 | | . . Dish holding (e.g., dish rack) |
488 | | . . . Dishwasher rack |
489 | | . Adjustable or contortable wall provides multiple configurations of use (i.e., alternative shapes) |
490 | | . Spiral sidewall |
491 | | . Rigid wire bent to form portion of bottom wall and sidewall |
492 | | . . Blank |
493 | | . Wall formed of flexible wire cloth (e.g., screen wire) |
494 | | . End wall structure |
495 | | . . Nonwire bottom (e.g., sheet metal, wood, plastic, etc.) |
495.01 | | RECEPTACLE HAVING FLEXIBLE, REMOVABLE INNER LINER |
495.02 | | . Paint receptacle |
495.03 | | . Receptacle for food or beverage |
495.04 | | . Means for venting air trapped between the liner and its receptacle |
495.05 | | . Liner interior accessible through an aperture in a receptacle wall or closure |
495.06 | | . Removable bag liner |
495.07 | | . . Plural bag liners for sequential use |
495.08 | | . . Means for holding the bag liner open |
495.09 | | . . . Means for simultaneously holding two or more bag liners open |
495.1 | | . . . Holding means extends through preformed bag aperture |
495.11 | | . . . Upper bag portion folded over top edge of its receptacle |
23.2 | | HORIZONTALLY ATTACHED RECEPTACLE SETS |
23.4 | | . Detachable |
23.6 | | . With stacking feature |
23.8 | | . Integral |
23.83 | | ARRANGEMENTS OF PLURAL RECEPTACLES |
23.86 | | . At least one combined or convertible |
23.87 | | . Receptacle having rigid, removable inner container |
23.88 | | . . Plural inner containers |
23.89 | | . . Releaseable securing or stabilizing means for inner container |
23.9 | | RECEPTACLE HAVING RIGID, REMOVABLE, NONRECEPTACLE INNER LINER |
23.91 | | RECEPTACLE HAVING RIGID, REMOVABLE EXTERNAL JACKET OR CASING |
500 | | COMPARTMENTED CONTAINER |
501 | | . Intercommunicable compartments |
502 | | . . With externally operable means for establishing and blocking communication |
503 | | . Compartments accessible from different planes |
504 | | . . Accessible from parallel, opposing planes |
505 | | . Compartments of differing vertical extent |
506 | | . Substantially concentric compartments |
507 | | . Cells (i.e., identical or similar compartments each intended to hold a single item) |
508 | | . . Egg carrier |
509 | | . . Bottle case |
510 | | . . . Removable partition |
511 | | . . . Wire partition |
512 | | . . . Cells formed by apertures in a horizontal plate |
513 | | . . . Cells formed by upwardly opening cup-like or cylindrical members |
514 | | . . . Cell bottom includes structure intended to engage inverted bottle mouth |
515 | | . . . Case includes structure to receive bottles individually or packaged (e.g., six packs, etc.) |
516 | | . . . Molded in one piece |
517 | | . . . . Blow molded |
518 | | . . . . Cells have bottle locating finger-like members |
519 | | . . . . Case bottom configured to stack on top of bottle in underlying case |
520 | | . Compartments fold together |
521 | | . Compartment in closure |
522 | | . . Closure compartment only accessible when closure is in its open configuration |
523 | | . Closure for compartment |
524 | | . . Separate closure for each compartment |
525 | | . . Closure permits access to one compartment while blocking access to another |
526 | | . . Closure has means to engage compartment forming elements (e.g., forms seal between closure and compartment) |
527 | | . Compartment forming element includes a bottom wall |
528 | | . Compartment insert |
529 | | . Compartment partition is movable or removable |
530 | | . . Flexible partition provides a variable volume |
531 | | . . Hinged partition |
532 | | . . Vertical partition received in groove or notch in the container |
533 | | . . . Plural partition-receiving grooves or notches |
534 | | . . Vertical partition horizontally slidable |
535 | | . . . Horizontal rod extends through opening in partition |
536 | | . . . . Including spring means biasing the partition |
537 | | . . . . Including screw threaded interengaging means on rod and partition |
538 | | . . . . Including locking means engaging the rod |
539 | | . . . . . Frictional locking means |
540 | | . . . . Including locking means engaging the container |
541 | | . . . Partition has reciprocating locking member acting between partition and sidewall |
542 | | . . . . Locking member received by means on or in container sidewall |
543 | | . . . Partition includes means to slidably engage the upper edge of container sidewall |
544 | | . . . Partition slides along guide means (e.g., groove, track, etc.) on or in container sidewall |
545 | | . . . . Partition includes releasable means locking it in position |
546 | | . . . . . Guide means has spaced apertures or ribs to receive the locking means |
547 | | . . . . . . Locking means includes a gear-like member which engages the spaced apertures or ribs |
548 | | . . . . . Partition locking means is engaged with the guide means by rotation |
549 | | . . . Partition slides along guide means (e.g., groove, track, etc.) on or in container bottom wall |
550 | | . . . . Partition includes releasable means locking it in position |
551 | | . . Extendable partition |
552 | | . . Intersecting partitions |
553 | | . Compartment partition is stiff and fixed in position |
554 | | . . Horizontal partition |
555 | | . . Partition and walls molded or cast together |
556 | | . . . Configured for use as a food service tray |
557 | | . . Partition one-piece with and folded from a container wall |
558 | | TILTABLE FRONT PANEL FOR DRAWER OR TRAY (E.G., FILE DRAWER HAVING HINGED FRONT PANEL) |
559 | | COMPRESSOR OR FOLLOWER PLATE FOR DRAWER OR TRAY |
200 | | CLOSURES |
201 | | . Thermal releaser or actuator |
202 | | . With condition responsive vent or valve |
203.01 | | . . Responsive to pressure |
203.02 | | . . . In each of plural, isolated passages |
203.03 | | . . . Liquid trap |
203.04 | | . . . Manually adjustable |
203.05 | | . . . . Having rotatably adjustable closure which places vent or valve in operative position |
203.06 | | . . . . . Rotation of closure causes actuation of vent or valve |
203.07 | | . . . . Valve operated by distinct actuator or closure |
203.08 | | . . . Rupturable |
203.09 | | . . . Relatively movable closure and receptacle rim parts |
203.1 | | . . . . Closure is spring-biased |
203.11 | | . . . Flexible, resilient vent closing member |
203.12 | | . . . . Flexible, ringlike vent closing member (e.g., O-ring) |
203.13 | | . . . . Stopper-type vent closure |
203.14 | | . . . . . Flexible opening in stopper |
203.15 | | . . . . Resilient sheetlike member retains separate vent closure |
203.16 | | . . . . Resilient sheetlike member closes vent opening |
203.17 | | . . . . . Self-closing aperture in member |
203.18 | | . . . . . Diaphragm-type member |
203.19 | | . . . Specified valve structure provides a diverse function (e.g., leakage preventing, lock releasing) |
203.2 | | . . . . Float or gravity valve |
203.21 | | . . . . Ball valve |
203.22 | | . . . . Locking feature |
203.23 | | . . . Spring-biased, axially translating member |
203.24 | | . . . . Two-way pressure relief valve |
203.25 | | . . . . . Annular sealing member deflects along axis perpendicular to surface |
203.26 | | . . . . . Plural springs bias individual members |
203.27 | | . . . . One-way, outwardly venting pressure relief valve |
203.28 | | . . . Two-way pressure relief valve |
203.29 | | . . . One-way, outwardly venting pressure relief valve |
210 | | . Key controlled |
211 | | . Motor driven |
212 | | . Combined or convertible |
212.5 | | . . With handle |
213 | | . Convex or concave closure conforms to curvature of opening to be closed |
214 | | . With separately applied sealing means for indicating unauthorized closure movement |
215 | | . With heat insulating insert or captive air space |
216 | | . Floating closure |
217 | | . . With liquid gasket |
218 | | . . Sectional, relatively moveable |
219 | | . . With surface water receiver (e.g., drain) |
220 | | . . With support for aground closure |
221 | | . . With gasket means intermediate closure rim and receptacle |
222 | | . . . Attached to closure |
223 | | . . . . Magnetic means urges gasket towards receptacle |
224 | | . . . . Mechanical means urges gasket towards receptacle |
225 | | . . . . Fluid filled gasket |
226 | | . . . . Resilient foam or stuffed gasket |
227 | | . . With vent means |
228 | | . Having liquid or semi-liquid gasket |
229 | | . Closure penetrated through intersecting slits |
230 | | . Magnetic |
231 | | . With vacuum breaker or manually operable vent |
232 | | . Having inflatable gasket or packing |
233 | | . Externally adjustable plug or gasket |
234 | | . . Closure carried gasket and expander means |
235 | | . . . Screw actuated |
236 | | . . . . With retainer |
237 | | . . . . With wedging expander |
238 | | . . . Cam actuated |
239 | | . . Fluid pressure |
240 | | . With seal means biased by internal pressure |
241 | | . Face plate type |
242 | | . . With closure for face plate opening |
243 | | . External and internal bar or closure |
244 | | . . Closure mounted for swinging (e.g., hinged) |
245 | | . . Plural operators |
246 | | . . Spring biased operator |
247 | | . . Eccentric operator |
248 | | . . Sectional bar |
249 | | . . Bar tethered to closure support |
250 | | . . Integral bar and operator |
251 | | . . Bar and operator removable with closure as a unit |
252 | | . Pivotally or slidably mounted semispherical hood-type closure |
253 | | . Closure members having alignable openings |
254 | | . Secondary closure within parameter of primary closure |
255 | | . Closures interconnected for common opening movement |
256 | | . Superposed closures for common opening |
257 | | . . Destructible outer closure |
258 | | . . Destructible inner closure |
259 | | . . Hinged |
260 | | . With closure opening arrangements for means (e.g., opening devices) |
261 | | . . Opening means comprises explosive charge |
262 | | . . Operator actuates closure in its opening or closing movement (e.g., foot pedal) |
263 | | . . . Hinged closure |
264 | | . . . . Biasing means |
265 | | . . Frangible member or portion |
266 | | . . . About line or point of weakness |
267 | | . . . . With cutting device |
268 | | . . . . Non-removable member or portion |
269 | | . . . . . Gripping means attached to or integral with member or portion (e.g., pull tab) |
270 | | . . . . With gripping means (e.g., pull tab) |
271 | | . . . . . Provided with vent |
272 | | . . . . . Rivet connection between pull tab and removable portion integral with pull tab |
273 | | . . . . . Rivet connection between pull tab and removable portion integral with removable portion |
274 | | . . . . . Adapted for engagement with special tool (e.g., slotted key) |
275 | | . . . . . . With strip or tool guide |
276 | | . . . . Line of weakness extends circumferentially of receptacle mouth |
277 | | . . . With cutting, punching, or cutter accommodating means |
278 | | . . . . Puncturing tool serves as closure |
279 | | . . . . Wire, string, or like (e.g., rip cord) |
280 | | . . . . . About seam |
281 | | . . Released by axial or radial pressure |
282 | | . . . Closure tilts on fulcra portions or rocker points |
283 | | . . . . Hinged closure |
284 | | . . Special tool or tool engaging means |
285 | | . . . Attached raising or pry-off means |
286 | | . . . . Repositionable about closure periphery |
287 | | . Closure adaptable for various sizes or openings |
288 | | . Removable closure guided in rotary movement (e.g., screw) |
289 | | . . Threads formed or altered upon application of closure |
290 | | . . With means to hold closure in a full or partially open position |
291 | | . . Swinging and rotary |
292 | | . . . Biased |
293 | | . . Quick removal (e.g., bayonet) |
294 | | . . . Elliptical closure flange or passage mouth |
295 | | . . . With biased gasket or packing |
296 | | . . . Interrupted threads |
297 | | . . . Keyhole slot |
298 | | . . . Radially inwardly and outwardly extending interlocking lugs |
299 | | . . . . With anti-friction means |
300 | | . . . Locking lug engages "L" or cresent-shaped keeper slots |
301 | | . . . Lugs engage cammed keeper |
302 | | . . . . Biased or resilient lugs |
303 | | . . With valve or vent means |
304 | | . . With packing or gasket |
305 | | . Warped cover flexed into operative position |
780 | | . Removable closure situated by resilient distortion and retained by preformed configuration (e.g., detent) |
781 | | . . Having structure to stack or nest when not in use |
782 | | . . Closure reinforced |
783 | | . . Closure interlocked by upward opening trough at passage mouth |
784 | | . . Noncontinuous interlock along perimeter of closure, closure support juncture |
785 | | . . . Vented at interlock |
786 | | . . . Apertured interlock |
787 | | . . . Interlock internal to passage mouth (e.g., stopper type closure) |
788 | | . . . Both closure and closure support modified for noncontinuous interlock |
789 | | . . Interlock internal to passage mouth (e.g., stopper type closure) |
790 | | . . . Closure flange interlocks closure support outer wall |
791 | | . . . Closure includes integral lifting tab |
792 | | . . Closure flange has noninterlocking contact internal to passage mouth |
793 | | . . Closure includes integral lifting tab |
794 | | . . Interlock surface on closure is bent or impressed |
795 | | . . With gasket or packing |
309.1 | | . Removable closure retained by ductile in situ deformation (e.g., crimp) |
309.2 | | . . Noncontinuous interlock along perimeter of closure, closure support juncture |
310.1 | | . . With gasket or packing |
314 | | . Crossbar carries closure and serves as closure fastener |
315 | | . Having means for securing or retaining closure in its closed position (e.g., fastening devices) |
316 | | . . With internal pressure-condition release |
317 | | . . Tilting handle fastens while pouring |
318 | | . . Handle attached |
319 | | . . Ring type |
320 | | . . . For applying radial pressure (e.g., contractable bands encircling member) |
321 | | . . . . Lever operated |
322 | | . . Comprising "U" shaped or bifurcated members (e.g., pivoted bails) |
323 | | . . Elongated members (e.g., leaf spring, radiating arms) acting between face of closure and opposed abutments or walls of the container |
324 | | . . Clamps, clips, hooks, or latches |
325 | | . . . Screw actuated |
326 | | . . . Biased |
327 | | . . Threaded member (e.g., stud, bolt, or screw) |
328 | | . . . With retainer |
810 | | . Pivotable, (e.g., hinged) |
811 | | . . Pivotable and slidable |
812 | | . . . Slidable along parallel guides (e.g., slots or rails) |
813 | | . . . . Slidable axially then pivotable to open position |
814 | | . . . . . Closure mounted on container carrying bail |
815 | | . . . . Each guide comprises a nonlinear slot or channel |
816 | | . . . Pivotable about axis at right angle to plane of closure |
817 | | . . About multiple axes |
818 | | . . . Multiple plane swing |
819 | | . . . Plural connected pivotable closure sections |
820 | | . . About axis at right angle to plane of closure |
821 | | . . . Pivotable about centrally located axis |
822 | | . . . Plural pivotable closure sections |
823 | | . . . Biased |
824 | | . . . Including means to limit pivoting movement |
825 | | . . Into container |
826 | | . . Plural pivotable closure sections |
827 | | . . Biased by distinct member |
828 | | . . . Counterweight |
829 | | . . . Leaf spring |
830 | | . . . Coil spring |
831 | | . . Including abutment or retaining means to hold closure in open position |
832 | | . . . Closure fixedly retained in open position |
833 | | . . Including integrally formed structure to retain closure in closed position |
834 | | . . . Closure situated by resilient distortion and retained by preformed configuration (e.g., detent) |
835 | | . . . . Noncontinuous interlock around perimeter of closure, closure junction |
836 | | . . Hinge members formed integrally with closure and closure support |
837 | | . . . Flexible hinge |
838 | | . . . . Particular biasing structure |
839 | | . . . . One piece container and closure |
840 | | . . . Hinge elements interlocked by elastic deformation |
841 | | . . . Hinge formed by overlapping reentrant flanges on closure and closure support |
842 | | . . . Hinge elements deformed in situ |
843 | | . . . Hinge elements joined by separate member |
844 | | . . . . Pintle |
845 | | . . Separately formed hinge including particular mounting means |
846 | | . . . Handle attached |
847 | | . . Separately formed flexible hinge |
848 | | . . Separately formed hinge members with pintle |
849 | | . . With gasket or packing |
345.1 | | . Closure guided in reciprocating movement |
345.2 | | . . Including means securing closure against movement |
345.3 | | . . . Resiliently biased (e.g., detent) |
348 | | . . Spring biased |
349 | | . . Having antifriction means |
350 | | . . Flexible closure |
351 | | . . Closure encompasses passage mouth |
345.4 | | . . Including means to limit reciprocating movement |
345.5 | | . . Plural reciprocating closures |
345.6 | | . . With gasket or packing |
796 | | . Removable closure retained by friction |
797 | | . . Closure embraced by upwardly opening trough at passage mouth |
798 | | . . . And includes juncture internal of passage mouth |
799 | | . . Noncontinuous overlap along perimeter of closure, closure support |
800 | | . . . Juncture internal of passage mouth (e.g., stopper type closure) |
801 | | . . Juncture internal of passage mouth (e.g., stopper type closure) |
802 | | . . . And includes closure flange embracing closure support outer wall |
803 | | . . . . With gasket or packing |
804 | | . . . With gasket or packing |
805 | | . . Closure includes integral lifting tab |
806 | | . . With gasket or packing |
359.1 | | . Removable closure retained by adhesive or fusion means |
359.2 | | . . Including gripping means for removing closure (e.g., pull tab) |
359.3 | | . . Multilayer |
359.4 | | . . Including heat sealed retaining means |
359.5 | | . . . Soldered |
360 | | . Closure controls vent in receptacle |
361 | | . Sealing or closing means for vent or filling opening |
362 | | . . By crimping |
363 | | . . Nonmetallic |
364 | | . . By application of hardenable material |
365 | | . . . With contents shield |
366.1 | | . Vent at closure, closure support juncture |
367.1 | | . Vent in closure |
368 | | . . With reservoir for vent discharge |
369 | | . . Antispattering cover |
370 | | . . . Screen |
371 | | . . With filter |
372 | | . . . Screen |
373 | | . . With means to prevent escape of contents through vent |
374 | | . . . Tortuous passage |
375 | | . Tethered closure |
376 | | . Ornamental |
377 | | . Transparent |
377.1 | | . . Percolator top type |
378 | | . Having gasket or packing |
379 | | . With disparate support for displaced closure |
380 | | . Having structure to stack or nest when not in use |
62 | | BLANK |
62.1 | | . Corner fold |
62.11 | | RECEPTACLE SIDE WALL MADE OF TWO OR MORE LAYERS OF MATERIAL PERMANENTLY ATTACHED TOGETHER |
62.12 | | . Beverage receptacle |
62.13 | | . Solid food receptacle |
62.14 | | . Decorative layer |
62.15 | | . Including a layer which comprises an inorganic, nonmetallic material (e.g., porcelain, glass, brick, concrete, earthenware) |
62.16 | | . Copper layer |
62.17 | | . Two different metallic layers |
62.18 | | . Hollow side wall |
62.19 | | . Layer of fibrous or filamentary material |
62.2 | | . . Wood or wood product layer (e.g., paper, paperboard) |
62.21 | | . Bag liner |
62.22 | | . Thermoplastic layer |
600 | | END WALL STRUCTURE |
601 | | . Having an outlet or inlet opening (e.g., bunghole, etc.) |
602 | | . Transparent |
603 | | . With weight or counterweight |
604 | | . One-piece side and end wall |
605 | | . . With support structure |
606 | | . . . One-piece with container |
607 | | . . End wall formed as a one-piece grid or mesh structure |
608 | | . . Contoured end wall (e.g., curved, corrugated, ribbed, etc.) |
609 | | . . . Pressure responsive contour |
610 | | . Joint or seam between sidewall and end wall |
611 | | . . End wall and sidewall of dissimilar materials |
612 | | . . Adhered (e.g., welded, cemented, soldered, bonded, etc.) |
613 | | . . . Plastic end wall or sidewall |
614 | | . . Including a packing element (e.g., gasket) |
615 | | . . Interlocked joint |
616 | | . . . Joint includes separate reinforcing element |
617 | | . . . Sidewall received in a channel in the end wall |
618 | | . . . Sidewall includes both a ledge-like area receiving the end wall and means engaging the outer surface of the end wall |
619 | | . . . Joint bent or rolled outwardly |
620 | | . . . Joint bent or rolled inwardly |
621 | | . . . Sidewall and end wall have interlocking grooves |
622 | | . . Joint includes separate fastener (e.g., rivet, nail, screw, etc.) |
623 | | . . Contoured end wall (e.g., curved, corrugated, ribbed, variable thickness, etc.) |
624 | | . . . Pressure responsive contour |
625 | | . Removable bottom wall (i.e., not a closure) |
626 | | . Multi-layer end wall structure |
627 | | . . Spaced layers |
628 | | . Support structure |
629 | | . . Movable on container (e.g., adjustable) |
630 | | . . Removable support structure |
631 | | . . Fixed support structure provides alternate container orientations (e.g., angled bottom support areas) |
632 | | . . Cushioned support structure |
633 | | . . Support formed by downward extension of sidewall |
634 | | . . Chime (i.e., supporting ring circumferentially attached to sidewall) |
635 | | . . Support and bottom wall are of one-piece construction and attached to sidewall |
636 | | . . Support attached to bottom wall |
637 | | . . Support formed by rod or wire encased in bead folded under bottom wall |
638 | | . . Sidewall, bottom wall and support are separate elements and attached at a common joint |
639 | | SEPARATE REINFORCING ELEMENT |
640 | | . Open end edge reinforcing means |
641 | | . . Edge (e.g., rim, lip, brim, etc.) bent or rolled around a reinforcing element |
642 | | . . Edge encompassed by U-shaped reinforcing element |
643 | | . . Molded container including separate edge reinforcing element |
644 | | . . . Embedded element |
645 | | . Molded container with embedded reinforcing element |
646 | | . Externally attached sidewall reinforcing element |
647 | | . . Spaced element supports container (e.g., cradle, end frame, etc.) |
648 | | . . Circumferential band or belt |
649 | | . . . Handling ring or collar |
650 | | . . Longitudinal element |
651 | | . Internally attached reinforcing element |
652 | | . . Extending between adjacent walls |
653 | | . . Attached to and extending between opposite walls across the container |
654 | | . . Circumferential |
655 | | OPEN END EDGE CUSHIONING MEANS |
656 | | ONE-PIECE, REINFORCED OPEN END EDGE |
657 | | . Flange |
658 | | . Bead |
659 | | . Molded |
660 | | SIDEWALL STRUCTURE |
661 | | . Having an outlet or inlet opening (e.g., bunghole, etc.) |
662 | | . Transparent wall or portion |
663 | | . . Sight glass |
664 | | . . Instrument casing (e.g., for a meter, etc.) |
665 | | . . Two or more walls |
666 | | . Collapsible wall feature |
667 | | . . Wall permanently deformed when collapsed |
668 | | . Skeleton framework |
669 | | . Contoured sidewall (e.g., curved, corrugated, ribbed, variable thickness, etc.) |
670 | | . . Corrugated |
671 | | . . . Axially extending only |
672 | | . . . Circumferentially extending only |
673 | | . . . Circumferentially and axially extending |
674 | | . . Embossed |
675 | | . . Molded container |
676 | | . Apertured sidewall (e.g., hole, slot, etc.) |
677 | | . Sidewall seam or joint |
678 | | . . Adhered (e.g., welded, cemented, soldered, bonded, etc.) |
679 | | . . . Butt welded joint |
680 | | . . . Overlapped |
681 | | . . Including packing element (e.g., gasket) |
682 | | . . Interlocked joint |
683 | | . . . Separate strip-like element |
684 | | . . . . Slide connector (e.g., "C" shaped rigid strip) |
685 | | . . . . H-shaped connector |
686 | | . . . . Exterior circumferential clamping band |
687 | | . . . . . With interior circumferential backup band |
688 | | . . . . Exterior strip and interior strip secured together by transverse connector: |
689 | | . . . Joint bent or rolled |
690 | | . . . Including tab on one edge which passes through slot on other edge and is bent |
691 | | . . . Snap-type (i.e., secured by resilient distortion) |
692 | | . . Joint includes separate fastener (e.g., rivet, bolt, screw, etc.) |
693 | | . . . Removable fastener |
694 | | CONTAINER ATTACHMENT OR ADJUNCT |
694.1 | | . External covering for a hot water heater or boiler |
695 | | . Includes edge for removing excess material (i.e., scraper) |
696 | | . . With handle structure for lifting container |
697 | | . . With tool or brush holder |
698 | | . . Annular scraping edge |
699 | | . . With specific mounting structure |
700 | | . . . Rim mounted |
701 | | . . . . Mounting structure coacts with rim groove |
702 | | . . . Internally mounted |
703 | | . Drinking device |
704 | | . . Mustache guard |
705 | | . . With straw or sucking tube |
706 | | . . . Internal straw includes float means |
707 | | . . . Internal straw attached to movable closure |
708 | | . . . Straw stored within closure |
709 | | . . . Straw extends through removable closure |
710 | | . . . Attached to or within sidewall of container |
710.5 | | . . With handle |
711 | | . . Removable closure having specific drinking means |
712 | | . . . With tear-out portion |
713 | | . . . Having aperture |
714 | | . . . With valve means |
715 | | . . . . Finger operated |
716 | | . . Sanitary lip guard |
717 | | . . . With outwardly extending mouthpiece |
718 | | . . . Annular |
719 | | . . Internal anti-splash or anti-spill device |
720 | | . Expanding or contracting portion or component |
721 | | . . Pressure or temperature compensating |
722 | | . . . In holder separate from container |
723 | | . . Internal bladder-like bag for contents |
724 | | . Valve protector |
725 | | . . With provision for locking device |
726 | | . . Rotatably mounted |
727 | | . . Removably attached by rotary motion (e.g., screw, bayonet, etc.) |
728 | | . . Pivotable portion permits access to valve |
729 | | . End wall attachment |
730 | | . Protective guard (e.g., animal deterrent) |
731 | | . Splatter shield or deflector |
732 | | . Sidewall cushioning means |
733 | | . Annular groove guard (e.g., paint can shield) |
734 | | . Loose fill anti-slosh means |
735 | | . With tool or implement holder |
736 | | . . Brush |
737 | | . Container holder |
738 | | . . Disposable cup holder |
739 | | . . Insulated |
740 | | . . Holder has lid for closing container |
741 | | . . Spaced upper and lower elements connected by a handle structure |
742 | | . . . Upper element secures container |
743 | | . . Wire |
744 | | . Removable support for displaced closure |
745 | | . Container vent means |
746 | | . . Automotive type |
747 | | . . Tortuous path |
748 | | . . . Liquid trap |
749 | | . . Vapor reservoir |
750 | | . . . For multiple containers |
751 | | . Container hanging means (i.e., for hanging from an inanimate support device) |
752 | | . Handle, handle component, or handle adjunct |
753 | | . . Insulated handle |
754 | | . . Flexible handle (e.g., rope, cord, chain, web, etc.) |
755 | | . . Specified gripping structure (i.e., the handle portion that is contacted by the hand) |
756 | | . . Handle having secondary function (e.g., as a support) |
757 | | . . Handle having variable size or configuration (i.e., handle has relatively movable components) |
758 | | . . Handle or handle attaching means for encircling a container |
759 | | . . Means for detachably securing a handle to a container |
760 | | . . . Bail handle (i.e., inverted U-shaped handle) |
761 | | . . Container having a handle and a handle storage recess |
762 | | . . Means for retaining a movable handle in at least one fixed position |
763 | | . . . Non-use position |
764 | | . . . Including means for retaining the handle in at least two fixed positions |
765 | | . . Means for limiting the range of swinging movement of a pivotable handle (e.g., a stop to prevent contact of a bail-type handle with a container wall) |
766 | | . . Swinging handle which doesn`t straddle container mouth during use (or means for attaching said handle) |
767 | | . . Handle or handle attaching means secured within a container seam |
768 | | . . Handle or handle attaching means attached to a container top wall |
769 | | . . Handle or handle attaching means attached to the top edge of a container sidewall (e.g., rim, bead, flange, etc.) |
770 | | . . Handle extends through an aperture, or into a recess, in container material |
771 | | . . Handle is of one-piece construction with a container |
772 | | . . Plural handles or means for attaching plural handles to a container |
773 | | . . Bail handle (i.e., inverted U-shaped handle) which straddles container mouth during use (or means for receiving a bail handle) |
774 | | . . . Handle receiving means extends above the container rim |
775 | | . . . Handle receiving means, which is not of one-piece construction with the container, extends through an aperture, or into a recess, in the container material |
776 | | . . . Handle receiving means, which is not of one-piece construction with the container, includes an aperture or recess for receiving a handle end |
86.1 | | . Filling member |
86.2 | | . . Automotive type |
86.3 | | . . . With anti-siphon means |
86.4 | | . . Nonrefillable |
87.1 | | . Disinfectant device |
87.2 | | . . Spray |
88.1 | | . Fire prevention |
88.2 | | . . Screen (flame arrester) |
88.3 | | . . By inert gas |
89.1 | | . Pressure relief means |
89.2 | | . . Frangible pressure relief means |
89.3 | | . . . With cutting means |
89.4 | | . . Fusible pressure relief means |
890 | | MISCELLANEOUS |
| | ****************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ****************************** |
900 | | RUPTURE PROOF |
901 | | LIQUIFIED GAS CONTENT (CRYOGENIC) |
902 | | FOAM |
903 | | INSULATING JACKET FOR BEVERAGE CONTAINER |
904 | | PAIL OR BUCKET OF FLEXIBLE OR FLACCID MATERIAL (E.G., FABRIC, RUBBER, ETC.) |
905 | | FLEXIBLE FUEL TANK FOR A VEHICLE |
906 | | BEVERAGE CAN (I.E., BEER, SODA, ETC.) |
907 | | . Collapsible |
908 | | TRASH CONTAINER |
908.1 | | . With liner |
908.2 | | . . Including deodorizer, animal repellent, or insecticide |
908.3 | | . . Including guiding means for directing trash into the container (e.g., funnel) |
909 | | . Segregated |
910 | | . Table-top type |
911 | | . . Can converted to ash container |
912 | | COOKWARE (I.E., POTS AND PANS) |
913 | | VENTILATED CONTAINER |
914 | | CONTAINER CONTOURED TO FIT A BODY PART |
915 | | AEROSOL VALVE CAP OR PROTECTOR |
915.1 | | HAND-CARRIED CONTAINER FOR TRANSPORTING A BEVERAGE OR PREPARED FOOD (E.G., LUNCH BOX, DINNER PAIL, PICNIC COOLER) |
915.2 | | . Insulated cooler (e.g., for use on a picnic, at the beach) |
916 | | CONTAINER INCLUDING AXIALLY OPPOSED REMOVABLE CLOSURES |
917 | | CORROSION RESISTANT CONTAINER |
918 | | SPACING ELEMENT FOR SEPARATING THE WALLS OF A SPACED-WALL CONTAINER |
919 | | . Removable or separable spacing element |
920 | | . Shock absorbing spacing element (e.g., spring) |
921 | | . Spacing element of unitary construction with one wall |
| | ****************************** |
| | DIGESTS |
| | ****************************** |
DIG 1 | | Beer barrels |
DIG 2 | | Bottle crates |
DIG 3 | | Breaker strips and sealing strips |
DIG 4 | | Bushings |
DIG 5 | | Antidrip |
DIG 6 | | Drains |
DIG 7 | | Flexible tubes |
DIG 8 | | Ice cream cabinets |
DIG 9 | | Insulating materials |
DIG 10 | | Lunch kits |
DIG 11 | | Materials |
DIG 12 | | Molded |
DIG 13 | | Odd-shaped |
DIG 14 | | Plastic |
DIG 15 | | Plastic bottle crates |
DIG 16 | | Pressure indicators |
DIG 17 | | Pressure and temperature locks |
DIG 18 | | Refrigerator linings |
DIG 19 | | Rubber plugs and caps |
DIG 20 | | Safety locking devices |
DIG 21 | | Shields |
DIG 22 | | Seamless |
DIG 23 | | Fiberglass |
DIG 24 | | Tank trucks |
DIG 25 | | U-shaped, sectional |
DIG 26 | | Vanity |
DIG 27 | | Vents |
DIG 28 | | Washtubs |
DIG 29 | | Welded seam |
DIG 30 | | Biodegradable |
DIG 31 | | Sonic seal |
DIG 32 | | Radiator cap |
DIG 33 | | Gasoline tank cap |
DIG 34 | | Anti-tamper pharmaceutical capsules (e.g. tamper indicating or resistant) |
| | ********************************* |
| | FOREIGN ART COLLECTIONS |
| | ********************************* |
| | Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collection listed below. These collections contain ONLY foreign patents or nonpatent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived. |
FOR 100 | | . Removable closure retained by resilient distortion of preformed configuration, e.g., detent (220/306) |
FOR 101 | | . . Interlocking means internal of passage mouth, e.g., stopper-type closure (220/307) |
FOR 102 | | . . With gasket or packing (220/308) |
FOR 103 | | . Removable closure retained by ductile type in situ deformation, e.g., crimp (220/309) |
FOR 104 | | . . With gasket or packing (220/310) |
FOR 105 | | . Removable closure retained by friction (220/352) |
FOR 106 | | . . With closure guiding means (220/353) |
FOR 107 | | . . Closure received by upwardly opening trough at passage mouth (220/354) |
FOR 108 | | . . Passage mouth received by downwardly opening channel in closure (220/355) |
FOR 109 | | . . Closure flange embraces passage mouth (220/356) |
FOR 110 | | . . . With gasket or packing (220/357) |
FOR 111 | | . . With gasket or packing (220/358) |
FOR 112 | | WITH SEPARABLE LINER OR ENCASEMENT (220/400) |
FOR 113 | | . Skeleton encasement (i.e., outer lattice work) (220/401) |
FOR 114 | | . Including shield for liner (220/402) |
FOR 115 | | . "Flexible" or "flaccid" liner (220/403) |
FOR 116 | | . . Supported at open terminus (e.g., bag, sack) (220/404) |
FOR 117 | | . . Plate or tray-type (e.g., foil ashtray, paper dish) (220/405) |
FOR 118 | | . . . Plural stack or nest (220/406) |
FOR 119 | | . . With liner supply (220/407) |
FOR 120 | | . Erected liner for erected container (220/408) |
FOR 121 | | . . With liner lifter mechanism (220/409) |
FOR 122 | | . . Nonmetallic liner (220/410) |
FOR 123 | | . . Prefilled "can" type (220/411) |
FOR 124 | | . . . "Hot", "cold", "insulated" chest-type (220/412) |
FOR 125 | | . . . . With specified liner retainer (220/413) |
FOR 126 | | FILAMENTARY WOUND BARRIER STRUCTURE (220/414) |
FOR 127 | | MULTILAYER BARRIER STRUCTURE (220/415) |
FOR 128 | | . Folded single blank-type 220/416) |
FOR 129 | | . . Including coated layer (220/417) |
FOR 130 | | . . Plural lamina blank (400/418) |
FOR 131 | | . . Metallic blank (220/419) |
FOR 132 | | . Evacuated space between layers (220/420) |
FOR 133 | | . . With intermediate insulating means (220/421) |
FOR 134 | | . . . Fluent material (220/422) |
FOR 135 | | . . . Plus distinct reflector means (220/423) |
FOR 136 | | . . With intermediate reflector means (220/424) |
FOR 137 | | . . Layer-space-layer only (220/425) |
FOR 138 | | . Fluid-filled space between layers (fluid other than "dead" air) (220/426) |
FOR 139 | | . . Compartmented dish or tray (e.g., baby server) (220/427) |
FOR 140 | | . . Water or steam (220/428) |
FOR 141 | | . Intermediate fluent mass layer (e.g., powder, loose hair, particles, etc.) (220/429) |
FOR 142 | | . Separate edge-bridge (e.g., "breaker-strip") (220/430) |
FOR 143 | | . . Spaced wall-contacting (220/431) |
FOR 144 | | . . . With fastener means (220/432) |
FOR 145 | | . . . . Pronged bridge (220/433) |
FOR 146 | | . Separate resilient fastener (220/434) |
FOR 147 | | . Specified structure for relative layer movement (220/435) |
FOR 148 | | . . Articulated layer members (220/436) |
FOR 149 | | . . Distinct nonlayer member (220/437) |
FOR 150 | | . . . With corrugated layer (220/438) |
FOR 151 | | . . . Plural slip elements (220/439) |
FOR 152 | | . . Corrugated layer (220/440) |
FOR 153 | | . Including a corrugated layer (220/441) |
FOR 154 | | . . Metallic corrugated (220/442) |
FOR 155 | | . . Coextensively bonded (220/443) |
FOR 156 | | . Intermediate foamed-in-situ layer (220/444) |
FOR 157 | | . Specified spacer means (nonlayer) (220/445) |
FOR 158 | | . . Adjacent an open and/or neck-like portion (220/446) |
FOR 159 | | . . . And a closed-end spacer (220/447) |
FOR 160 | | . . Resilient (220/448) |
FOR 161 | | . Pilant wrapper supported by content (220/449) |
FOR 162 | | . Including a foil layer (220/450) |
FOR 163 | | . Including asbestos filler (220/451) |
FOR 164 | | . Including a batt layer (220/452) |
FOR 165 | | . Coextensively bonded self-sustaining layers (220/453) |
FOR 166 | | . Specified coated or impregnated layer (e.g., dipped, sprayed) (220/454) |
FOR 167 | | . . External (220/455) |
FOR 168 | | . . Specified plural coatings (220/456) |
FOR 169 | | . . Specified nonmetal coating (220/457) |
FOR 170 | | . . . Compatible with food content (220/458) |
FOR 171 | | . . . Hot water boiler-type (220/459) |
FOR 172 | | . Including flaccid veneer-like layer (e.g., cloth, paper) (220/460) |
FOR 173 | | . . "Plastic" (e.g., polyethylene, rubber, latex, etc.) (220/461) |
FOR 174 | | . . . Within erected blank (220/462) |
FOR 175 | | . . Within erected blank (220/463) |
FOR 176 | | . Intermediate self-sustaining panel (220/464) |
FOR 177 | | . Including specified barrier aperture fitting (e.g., flange, bung) (220/465) |
FOR 178 | | . Double-walled barrel or drum-type (220/466) |
FOR 179 | | . Refrigerator cabinet-type (220/467) |
FOR 180 | | . Plural self-sustaining layers (220/468) |
FOR 181 | | . Spaced walls (220/469) |
FOR 182 | | LINING, PER SE (220/470) |
| | CLOSURES |
FOR 183 | | . Closure guided in reciprocating movement (220/345) |
FOR 184 | | . . Having means securing closure against movement (220/346) |
FOR 185 | | . . . Cammed keeper (220/347) |
FOR 186 | | . Removable closure retained by adhesive or fusion means (220/359) |
FOR 187 | | . Mounted for compount movememnt (329) |
FOR 188 | | . . About container carrying bail (330) |
FOR 189 | | . . Swinging and sliding (331) |
FOR 190 | | . . Multiple plane swing (332) |
FOR 191 | | . . Swings about multiple pivots (333) |
FOR 192 | | . Mounted for swinging (e.g., hinged) (334) |
FOR 193 | | . . With means holding closure in open position (335) |
FOR 194 | | . . About pivot at right angle to plane of closure (336) |
FOR 195 | | . . Hinge members formed integrally with closure and closure support (337) |
FOR 196 | | . . Complementary hinge elements frictionally interlocked (338) |
FOR 197 | | . . . Flexible hinge (339) |
FOR 198 | | . . . Hinged formed by overlapping reentrant flanges on closure and closure support (340) |
FOR 199 | | . . . Hinge element deformed in situ (341) |
FOR 200 | | . . . Complementary hinge elements interlocked by separate member (342) |
FOR 201 | | . . . . Pintle (343) |
FOR 202 | | . . With gasket or packing (344) |