Subclass |
| Title |
ClassTitle
|
| ===>
BOTTLES AND JARS
|
| | |
2 | | BOTTOM FILLED |
3 | | EJECTING |
4 | | . Siphon type |
5 | | . . Spring controlled |
6 | | COMPARTMENT |
365 | | CONTENT INDICATING |
366 | | . Interior of receptacle |
367 | | . Poison |
10 | | NESTING |
11.1 | | NURSING BOTTLES AND NIPPLES |
11.2 | | . With temperature responsve indicator |
11.3 | | . Collapsible liner or wall |
11.4 | | . With valve for liquid |
11.5 | | . With vent or valve for air |
11.6 | | . With cover |
12.1 | | MULTILAYER BARRIER STRUCTURE |
12.2 | | . Coating or lamination |
13.1 | | . Insulating material between spaced wall panels |
14 | | NONREFILLABLE |
15 | | . Air trap |
16 | | . Ejecting |
17 | | . Guard or valve type |
18 | | . . Valves |
19 | | . . . Single type spring controlled |
20 | | . . . Single type float controlled |
21 | | . . . Single type gravity controlled |
22 | | . . . . Separate disconnected weight |
23 | | . . . . Pendant weight |
24 | | . . . . Pivoted |
25 | | . . . Multiple type |
26 | | . . Guards |
27 | | . . . Integral with the container |
28 | | . . . Cap |
29 | | . . . Fasteners |
30 | | . . Separate neck |
40 | | NECK |
41 | | . Drip-preventing means |
42 | | . Reinforcing structure |
43 | | . Structure to receive a particular closure |
44 | | . . Structure includes threads |
45 | | . . Structure includes a seal |
46 | | . Means to aid in removing closure |
47 | | . Frangible neck |
48 | | . . Broken by manipulation of closure |
49 | | . . Nonreclosable container |
50 | | . . Stopper |
51 | | . . . Multiple stoppers |
52 | | . . . . Spring retainer |
53 | | . . . . Seal |
54 | | . . . Stopper fastener |
55 | | . . . . Spring |
200 | | CLOSURES |
201 | | . Having warning means or means impeding closure removal (e.g., child proof) |
202 | | . . Barbed |
203 | | . . With exhibitive feature |
204 | | . . Receptacle opening sealed by each of plural closures |
205 | | . . Closure at or forms receptacle base |
206 | | . . Having registerable indicia to facilitate closure removal |
207 | | . . With key-actuated lock |
208 | | . . Multidirectional turn or twist type |
209 | | . . Closure removal includes receptacle deformation |
210 | | . . Closure removal includes receptacle tilting |
211 | | . . Closure or closure portion engagingly enters receptacle opening |
212 | | . . . Expandable |
213 | | . . . With movable closure removal obstacle |
214 | | . . . Closure guided in simultaneous turning and reciprocating movement (e.g., threaded) |
215 | | . . With provision for opening tool |
216 | | . . Flexible locking member integral with or attached to closure |
217 | | . . Closure guided in simultaneous turning and reciprocating movememnt (e.g., screw threaded) |
218 | | . . . Closure threaded to receptacle and/or rotatable closure removal obstruction |
219 | | . . . Encompassing closure removal obstacle and closure engaging for concurrent movement |
220 | | . . . . Axially movable closure removal obstacle or obstacle portion |
221 | | . . . Closure removal obstacle movable to unobstructive position |
222 | | . . . Quick removal (e.g., bayonet) |
223 | | . . Closure guided in sequential turning and reciprocating movement |
224 | | . . Snap-type closure |
225 | | . . . With movable closure removal obstacle |
226 | | . Substitute closure having means to remove original closure |
227 | | . With structure for removably holding an article or material |
228 | | . Combined or convertible |
229 | | . . With straw |
230 | | . Including visual indicia |
231 | | . Provided with means to purposely depress or contact receptacle contents |
232 | | . Retained by bonding or adhesive means |
233 | | . With hardenable liquid or plastic seal |
234 | | . With liquid seal at closure seat on receptacle |
235 | | . Closure pivoted about receptacle opening |
236 | | . . Pivoted at right angle to plane of closure |
237 | | . . With fastening means |
238 | | . . . Cam type |
239 | | . . . Closure mounted on lever-actuated yoke |
240 | | . . . . With specific closure structure |
241 | | . . . . . Yoke-receiving slot or hole |
242 | | . . . . Lever bears directly on closure |
243 | | . . . Screw-type clamp or threaded |
244 | | . . . Spring type |
245 | | . . . . Catch or hook type |
246 | | . Shrinkable closure, fastener, or seal |
247 | | . Self-sealing, piercable-type closure |
248 | | . . With vent and air filter means |
249 | | . . With frangible cover portion |
250 | | . Frangible member or portion |
251 | | . . Outer closure breaks or tears away to expose second closure |
252 | | . . Twist-off motion frees reusable closure |
253 | | . . About line or point of weakness |
254 | | . . . Tear strip |
255 | | . . . . With nonintegral actuator (e.g., attached pull ring) |
256 | | . . . . Line of weakness extends circumferentially of receptacle mouth opening |
257 | | . . With cutting or tearing means (e.g., wire or string rip cord) |
258 | | . Closure removal causes portion thereof to remain with receptacle |
259 | | . Gas passes through a liquid |
260 | | . With pressure-responsive valve |
261 | | . Barrier permeable to gas and impermeable to liquid |
262 | | . With vacuum breaker |
263 | | . Nonresealable, nonremovable closure |
264 | | . Applied from within receptacle |
265 | | . . Plural closures |
266 | | . . Ball type |
267 | | . . With manipulator |
268 | | . . . Wire |
269 | | . Having an inflatable member |
270 | | . With pressure-responsive seal |
271 | | . Closure expands responsive to internal receptacle pressure |
272 | | . Cap type with manually actuated means to contract depending skirt part |
273 | | . With separate applied fastener to hold closure in closed portion |
274 | | . . Ring type |
275 | | . . . Contracting |
276 | | . . . Screw |
277 | | . . Cap-type fastener |
278 | | . . . Bound or tied |
279 | | . . Expanding fastener |
280 | | . . Clamping fastener |
281 | | . . . Inclines to interrupted threads |
282 | | . . . . Spring-type clamp |
283 | | . . . Screw actuated |
284 | | . . . Lever actuated |
285 | | . . . . Bail |
286 | | . . . Bail type |
287 | | . . . Spring |
288 | | . . . . Coil |
289 | | . . . . Closure engaging spring arm hinged to receptacle or support thereon |
290 | | . . . . Spring clip traverses closure, with depending ends thereof diametrically gripping receptacle exterior |
291 | | . . . Flexible tie |
292 | | . . Disk exerts radial force against cup-shaped closure within receptacle mouth or neck |
293 | | . With attached nonintegral spring-type clamping fastener engaging exterior receptacle surface |
294 | | . Stopper with attached, nonintegral clamp means engaging interior receptacle surface |
295 | | . With means to facilitate closure removal |
296 | | . . Stopper-type closure |
297 | | . . . Piercing-type closure extractor |
298 | | . . . Disk-type closure with finger-engageable projection |
299 | | . . . Permanently secured in stopper cavity |
300 | | . . . . Cavity extends circumferentially of stopper surface |
301 | | . . Actuated by downwardly applied force |
302 | | . . Tool engaging means or closure or receptacle |
303 | | . . Separate opening means associated with closure |
304 | | . . . Lever-type, pry-off means |
305 | | . . Hand or finger engageable projection |
306 | | . Retainer (e.g., closure tethered to receptacle) |
307 | | . Receptacle interior communicable with exterior with closure in applied position (e.g., vented) |
308 | | . . Communicating through a filter |
309 | | . . With separate inlet and outlet passages |
310 | | . . Communicable through small, openable aperture in disk-type closure |
311 | | . . With valve |
312 | | . . . Ball type |
313 | | . . . Rotary type |
314 | | . . . Screw actuated |
315 | | . . . Spring actuated |
316 | | . Cap type |
317 | | . . Resilient distortion of closure skirt holds it in closed position |
318 | | . . . Push on, twist off |
319 | | . . . Specifically designed to accommodate plural sizes |
320 | | . . . Combined with stopper structure |
321 | | . . . Closure and receptacle having preformed, coacting configurations |
322 | | . . Slidable transverse to receptacle opening axis |
323 | | . . Skirt made of separate strip bent into cylinder |
324 | | . . Crimped flange or skirt portion |
325 | | . . . Closure portion engagingly enters receptacle mouth |
326 | | . . . Flexible material (e.g., paper or foil) |
327 | | . . . Crimp deforms seal against receptacle |
328 | | . . . With vertical corrugation (e.g., crown cap) |
329 | | . . Removably attached to receptacle by relative rotation between keepers (e.g., screw threads or lugs) |
330 | | . . . With means to prevent unintentional rotation in closure releasing direction |
331 | | . . . Projection engages keeper to stop rotation in closure applying direction |
332 | | . . . Keeper has vertically and horizontally extending slots (e.g., bayonet) |
333 | | . . . Keeper formed by bend in bead encircling lower edge of cap skirt |
334 | | . . . Keeper formed only on inner wall of double-wall cap or consists of separate member on cap |
335 | | . . . Keeper consists of separate member on receptacle |
336 | | . . . Keeper consists of tab or strip struck from cap skirt |
337 | | . . . Cap skirt impressed with circumferential inclined keeper indent, or with circumferentially spaced keeper indents |
338 | | . . . Keeper shaved from inner surface of cap skirt |
339 | | . . . Keeper formed by inward facing beads spaced along lower edge of cap skirt |
340 | | . . . Keeper formed by horizontal flange projecting inward from lower edge of cap skirt |
341 | | . . With identifiable, integral, or separate gasket, seal, or liner |
342 | | . . . Spring biased |
343 | | . . . Depending sealing rib engages receptacle top |
344 | | . . . . Integral with closure |
345 | | . . . . Rib on seal ring |
346 | | . . . Seal locks closure to receptacle |
347 | | . . . Distinct layers |
348 | | . . . Foam |
349 | | . . . Disk |
350 | | . . . . Closure structure retains disk |
351 | | . . . . Annular depending deformation on closure engages disk |
352 | | . . . Ring |
353 | | . . Having flaired skirt |
354 | | . . Closure portion engagingly enters receptacle mouth |
355 | | . Stopper type |
356 | | . . Removably attached to receptacle by rotation (e.g., screw threaded or lugged) |
357 | | . . . Interrupted threads |
358 | | . . Expanding type |
359 | | . . . Cam or lever actuated |
360 | | . . . Screw actuated |
361 | | . . . Stem operated |
362 | | . . . Permanently deformed |
363 | | . . Disk type |
364 | | . . Composite |
370 | | END WALL STRUCTURE |
371 | | . One-piece side and end wall |
372 | | . . Support structure permanently affixed |
373 | | . . . One-piece with the container |
374 | | . . . . Footed support |
375 | | . . . . . Plurality of feet |
376 | | . Support structure |
377 | | . . Footed support |
378 | | . Apertured end wall |
379 | | SIDEWALL STRUCTURE |
380 | | . Having an inlet or outlet opening |
381 | | . Pressure-responsive structure |
382 | | . Contoured sidewall (e.g., curved, corrugated, ribbed, variable thickness, etc.) |
383 | | . . Recess in sidewall |
384 | | . . . Specified gripping structure |
385 | | . Apertured sidewall |
386 | | ATTACHMENT OR ADJUNCT |
387 | | . Drinking device |
388 | | . . With straw or drinking tube |
389 | | . . . Integral or nonseparable |
390 | | . Tool or implement holder or attachment |
391 | | . . For withdrawing contents from the container |
392 | | . Drip-catching attachment |
393 | | . . Container base support |
394 | | . . . Absorbent layer |
395 | | . Container support |
396 | | . . Handle |
397 | | . . . Bail-type |
398 | | . . . Permanent |
399 | | . . Hanger |
400 | | MISCELLANEOUS |
| | ****************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ****************************** |
900 | | COLLAPSIBLE WALL STRUCTURE |
901 | | TAMPER-RESISTANT STRUCTURE |
902 | | VENT |
| | ****************************** |
| | DIGESTS |
| | ****************************** |
DIG 1 | | Fins |
DIG 2 | | Coatings and laminations for making of bottle caps |
DIG 3 | | Medical |
DIG 4 | | Capping materials |
DIG 5 | | Spoons |
DIG 6 | | Resin-coated bottles |
DIG 7 | | With drinking cup |
DIG 8 | | Mixing |