| Subclass |
| Title |
|---|
|
ClassTitle
|
| ===>
COATING APPARATUS
|
| | | |
| 663 | ![[Patents]](../gifs/ps.gif) | CONTROL MEANS RESPONSIVE TO A RANDOMLY OCCURRING SENSED CONDITION |
| 664 | | . Sampling of associated base |
| 665 | | . Condition of coated material |
| 666 | | . Temperature responsive |
| 667 | | . . Of coating material or applicator |
| 668 | | . Responsive to attribute, absence or presence of work |
| 669 | | . . Selective application at a specific position |
| 670 | | . . Defect in the workpiece sensed |
| 671 | | . . Proximity of work to electrically charged applicator sensed |
| 672 | | . . Running length work |
| 673 | | . . . Edge of running length of web material sensed |
| 674 | | . . . Having means to sense speed of running length of work |
| 675 | | . . Removal of article sensed |
| 676 | | . . Presence of work at or passage of work through coating station sensed |
| 677 | | . . . With means to remove or to prevent depositing of excess coating material |
| 678 | | . . . . By means to interpose barrier |
| 679 | | . . . Having means to control coating application |
| 680 | | . . . . By means to initiate movement of applicator or applicator adjunct |
| 681 | | . . . . . By means to move applicator or applicator adjunct from inoperative position to operative position |
| 682 | | . . . . By means controlling the operation of a timing means |
| 683 | | . . . . Of a pump |
| 684 | | . . . . Of a valve |
| 685 | | . . . . . Fluid motor actuated |
| 686 | | . . . By means to control conveyor operation |
| 687 | | . . . . By means to intermittently advance conveyor |
| 688 | | . Responsive to condition of coating material |
| 689 | | . . Concentration of coating material in carrier medium |
| 690 | | . . . During application |
| 691 | | . . . Photoelectric sensor |
| 692 | | . . Pressure responsive |
| 693 | | . . Means to raise coating material to a predetermined level inside an enclosed container |
| 694 | | . . Level of supply |
| 695 | | INTERFACING CONTROL OF PLURAL OPERATIONS |
| 696 | | PROGRAM, CYCLIC, OR TIME CONTROL |
| 697 | | . Having prerecorded program medium |
| 698 | | . Having selection means for alternate operational sequences |
| 699 | | . Having timer |
| 700 | | . . Timing motor with cam or disk |
| 701 | | . . . Notched rotating disk |
| 702 | | . . Sequential timing of plural operations |
| 703 | | . . Time delay means |
| 704 | | . Sequential energization of plural operations |
| 705 | | . Having means to reverse operation at end of travel path |
| 706 | | . Cyclic operation of singular element |
| 707 | | INTERCONTROL OR SAFETY INTERLOCK |
| 708 | | CONDITION RESPONSIVE CONTROL |
| 709 | | . Responsive to diameter of wound material spool |
| 710 | | . Valve actuator |
| 711 | | . . Integral actuator extends through or is formed on valve seat |
| 712 | | WITH INDICATING, TESTING, INSPECTING, OR MEASURING MEANS |
| 713 | | . With means for visual observation |
| 714 | | . With means to return indicator to zero point |
| 13 | | EDIBLE BASE OR COATING TYPE |
| 14 | | . Stringing or decorating of coating |
| 15 | | . With cutting of work |
| 16 | | . Plural coating devices |
| 17 | | . With apparatus cleaning or conditioning |
| 18 | | . Solid means acting on coating after application |
| 19 | | . Tumbling particulate work (i.e., rumble) |
| 20 | | . With work drying, cooling, heating or noncoating gas contact |
| 21 | | . . To remove or spread applied coating by gas blast |
| 22 | | . With vibration of work |
| 23 | | . Combined |
| 24 | | . Projected of forced flow of coating material |
| 25 | | . . Intermittent |
| 26 | | . Immersion |
| 27 | | . . Superposed hopper or liquid column |
| 28 | | . . Moving coating container or tank |
| 29 | | . . Liquid coating supply and/or discharge to or from coating container |
| 30 | | . . Means for moving work into, through or out of coating |
| 31 | | . Drain troughs or implements |
| 31.5 | | BODY MEMBER PRINTING TYPE (E.G., FINGER PRINTING) |
| 32 | | WITH FOLDING, UNLFOLDING OR FESTOONING |
| 33 | | WITH STRETCHING OR TENSIONING |
| 34 | | . Transverse |
| 35 | | WITH CUTTING, PUNCHING OR TEARING OF WORK |
| 36 | | . Strand form work |
| 37 | | . Web or sheet work |
| 38 | | . . Slitting |
| 39 | | . . . And cut off |
| 40 | | . . Cut off |
| 41 | | . . . Pivoted cutter |
| 42 | | . . . Reciprocating cutter |
| 43 | | . . . By tearing |
| 44 | | WITH MEANS TO DEFORM WORK |
| 45 | | COATED SURFACE PROTECTING MEANS, E.G., SLIP SHEETS |
| 46 | | WITH PRINTING |
| 47 | | CARBONIZING, FLAME CONTACT OR BURNING OFF OF COATING INGREDIENT |
| 715 | | GAS OR VAPOR DEPOSITION |
| 716 | | . Means to coat or impregnate particulate matter |
| 717 | | . Object embedded in particulate mass |
| 718 | | . Running length work |
| 719 | | . Multizone chamber |
| 720 | | . Having means to expose a portion of a substrate to coating medium |
| 721 | | . . Substrate contacting mask |
| 722 | | . With treating means (e.g., jarring) |
| 723R | | . . By creating electric field (e.g., gas activation, plasma, etc.) |
| 723VE | | . . . Vacuum evaporation means within deposition chamber (e.g., activated reactive evaporation, etc.) |
| 723CB | | . . . . Ion cluster beam |
| 723EB | | . . . . Electron beam evaporator |
| 723MP | | . . . Multiple gas energizing means associated with one deposition site (i.e., excluding substrate heater as an energizing means) |
| 723FE | | . . . Focused electron beam gas energizing means |
| 723FI | | . . . Focusing means for ion beam coating material or focused ion beam gas energizing means (i.e., excluding ion plating or ion implanting) |
| 723MW | | . . . Microwave gas energizing means (e.g., 2.45 gigahertz, microwave plasma, etc.) |
| 723ME | | . . . . Producing energized gas remotely located from substrate |
| 723MR | | . . . . . With magnet (e.g., electron cyclotron resonance, etc.) |
| 723MA | | . . . . with magnet (e.g., electron cyclotron resonance, etc.) |
| 723AN | | . . . . Having antenna |
| 723HC | | . . . Hot cathode means for thermionic emission of electrons (e.g., tungsten filament, etc.) |
| 723DC | | . . . . With nozzle-shaped anode (i.e., DC spray gun) |
| 723E | | . . . Having glow discharge electrodes (e.g., DC, AC, RF, etc.) |
| 723ER | | . . . . Producing energized gas remotely located from substrate |
| 723I | | . . . Radio frequency antenna or radio frequency inductive coil discharge means |
| 723IR | | . . . . Producing energized gas remotely located from substrate |
| 724 | | . . By means to heat or cool |
| 725 | | . . . Substrate heater |
| 726 | | . Crucible or evaporator structure |
| 727 | | . . Movable crucible |
| 728 | | . Work support |
| 729 | | . . Moving work support |
| 730 | | . . . Rotary |
| 731 | | . . . . Inverting |
| 732 | | . . . Porous |
| 733 | | . Chamber seal |
| 50 | | WITH VACUUM OR FLUID PRESSURE CHAMBER |
| 50.1 | | . With means to apply electrical and/or radiant energy to work and/or coating material |
| 620 | | WITH MEANS TO APPLY ELECTRICAL AND/OR RADIANT ENERGY TO WORK AND/OR COATING MATERIAL |
| 621 | | . Electrostatic and/or electromagnetic attraction or projection of coating material to work |
| 622 | | . . Hollow or reentrant work surface interiorly coated |
| 623 | | . . Including electromagnetic field |
| 624 | | . . Control of deposition of coating material or selective area, e.g., pattern or edge effect |
| 625 | | . . . Plural electrodes selectively energized |
| 626 | | . . Projection from edge, e.g., electrostatic atomization |
| 627 | | . . With assisting projection or spray of coating material through free space |
| 628 | | . . . With electrode for collecting fugitive or off-target coating material |
| 629 | | . . . Fluid current projector, e.g., spray type |
| 630 | | . . . . With means to transport work |
| 631 | | . . . . . With movable coating projector |
| 632 | | . . . . . Transport lines with loop return |
| 633 | | . . . . . Plural transport lines |
| 634 | | . . . . . Through vapor-confining chamber |
| 635 | | . . . . . Shielded or insulated hangers or supports |
| 636 | | . . . Gravity flow of coating material |
| 638 | | . . Work passes between spaced electrodes |
| 639 | | . With electromagnetic and/or electrostatic removal of excessive deposit, e.g., detearing |
| 640 | | . With means to orient coating particles |
| 641 | | . Radiant heating |
| 642 | | . . Radiant drying of coated work |
| 643 | | . . . With additional diverse drying means |
| 52 | | WITH MEANS TO CENTRIFUGE WORK |
| 53 | | . Plural axes of rotation of work |
| 54 | | . Reciprocating centrifuge |
| 55 | | . Coating inside of hollow work |
| 56 | | WITH MANIPULATION OF WORK AFTER COATING TO DISTRIBUTE OR REMOVE COATING |
| 57 | | . Vibrating or jarring |
| 58 | | WITH HEAT EXCHANGE, DRYING, OR NON-COATING GAS OR VAPOR TREATMENT OF WORK |
| 59 | | . With solid heat exchange means contacting work |
| 60 | | . . Heated roll type |
| 61 | | . With treatment of waste gases, e.g., solvent recovery |
| 62 | | . To manipulate work by gas blast |
| 63 | | . To remove or spread applied coating by gas blast |
| 64 | | . With housing surrounding or engaging coating means |
| 65 | | . . Running length work |
| 66 | | . Plural treatments |
| 67 | | . . Running length work |
| 68 | | . Running length work |
| 69 | | . Cooling |
| 70 | | WITH CLEANING OR RECONDITIONING WORK SUPPORT OR CONVEYER |
| 71 | | WITH SUPPORT FOR EXTRANEOUS ARTICLE OF MATERIAL |
| 72 | | WITH MEANS TO PREPARE WORK SURFACE FOR COATING |
| 73 | | . Liquid treatment |
| 74 | | . . Fluxing |
| 600 | | WITH TREATMENT OF COATING MATERIAL |
| 602 | | . Of recirculated coating material |
| 603 | | . . By separation |
| 606 | | . By fiber preparation |
| 608 | | . By milling or comminution |
| 610 | | . By separation |
| 612 | | . By agitation |
| 75 | | COMBINED |
| 76 | | RUBBING TRANSFER OF SOLID COATING MATERIAL ONTO WORK |
| 77 | | . Running length work |
| 78 | | . . Strands or cords |
| 79 | | HALF TONE PRINTING FILM HOLDERS |
| 100 | | SOLID MEMBER OR MATERIAL ACTING ON COATING AFTER APPLICATION |
| 101 | | . Heated or cooled member |
| 102 | | . Nonuniform treatment (over treated area of work) |
| 103 | | . Diverse members |
| 104 | | . With means to clean or recondition members |
| 105 | | . Inside of hollow work |
| 106 | | . Web or belt member |
| 107 | | . Rotating work |
| 108 | | . Work-supported and guided carriage |
| 109 | | . Absorbent or porous mass or pad member |
| 110 | | . Rotary member |
| 111 | | . . Axis of rotation perpendicular to plane of coated surface |
| 112 | | . . Axis of rotation coincident or parallel to line of motion of work |
| 113 | | . . With reciprocation along axis of rotation |
| 114 | | . . Opposed rotary members |
| 115 | | . . . Axes of both in same horizontal plane |
| 116 | | . . . Flexible work |
| 117 | | . . . . Running length work |
| 118 | | . . Running length work |
| 119 | | . . . Member opposed to work back-up |
| 120 | | . Reciprocating member |
| 121 | | . Opposed members |
| 122 | | . . Running length work |
| 123 | | . Running length work |
| 124 | | . . Zigzag or jogged work path |
| 125 | | . . Die passage |
| 126 | | . . Member opposed to work back-up |
| 200 | | SOLID APPLICATOR CONTACTING WORK |
| 201 | | . With means to support applicator on body or clothing |
| 202 | | . Heater or cooler for applicator or for film-transfer feed member |
| 203 | | . With cleaner or conditioner for applicator |
| 204 | | . With nonuniform removal of coating material from applicator |
| 205 | | . Expansible or contractible to effect work contract |
| 206 | | . Combined with other type coating applier |
| 207 | | . Work-supported and guided carriage |
| 208 | | . . Strand, rod or bar traversing |
| 209 | | . With work-handling or work-supporting |
| 210 | | . . With means to alter relative rates of work and applicator motions |
| 211 | | . . Pattern or definite circumscribed area of application |
| 212 | | . . . Relief or intaglio applicator |
| 213 | | . . . Mask or stencil |
| 214 | | . . Coating inside of hollow work |
| 215 | | . . . Inside only |
| 216 | | . . Plural applicators or plural-applying surfaces on single applicator |
| 217 | | . . . Diverse applicator types |
| 218 | | . . . Rotating work |
| 219 | | . . . . Parallel, spaced or overlapping applications |
| 220 | | . . . Plural applicators and separate work for each |
| 221 | | . . . Parallel, spaced or overlapping applications |
| 222 | | . . . . Adjustable spacing or overlap |
| 223 | | . . . Work moving past sequentially arranged applicators |
| 224 | | . . . . Rotary applicator opposite rotary applicator or rotary back-up |
| 225 | | . . . Simultaneously operating on work |
| 226 | | . . . . Opposed applicators |
| 227 | | . . . . . Rotary |
| 228 | | . . . . . . Open side applicator support |
| 229 | | . . Yarn wound drum indexed for stripping |
| 230 | | . . Rotating turret, wheel, or drum work conveyer |
| 231 | | . . . Sheet form work |
| 232 | | . . Rotating work during coating application |
| 233 | | . . . Work rotated by applicator |
| 234 | | . . Strand form work |
| 235 | | . . With winding or unwinding of work for supply or removal |
| 236 | | . . Sheet stacking, unstacking or handling |
| 237 | | . . . Coating applicator supported by stack |
| 238 | | . . Reciprocating work holder |
| 239 | | . . Endless belt-type work conveyers |
| 240 | | . . Compound motion of applicator during application |
| 241 | | . . Reciprocating or oscillating applicator |
| 242 | | . . . Along surface of work |
| 243 | | . . . To and from coating material supply |
| 244 | | . . Rotary applicator |
| 245 | | . . . With means to strip work from applicator |
| 246 | | . . . With means to guide work to follow perimeter of applicator |
| 247 | | . . . Intermittently acting work back-up |
| 248 | | . . . Opposed back-up and rotary applicator |
| 249 | | . . . . Rotary back-up |
| 250 | | . . . . . Open side applicator and back-up support |
| 251 | | . . . . Open side applicator and back-up support |
| 252 | | . . . With guide or gauge for edge or face of work |
| 253 | | . . Movable back-up presses work against fixed applicator |
| 254 | | . Coating inside of hollow work |
| 255 | | . Plural applicators and/or plural sources of coating material |
| 256 | | . Movably mounted applicator |
| 257 | | . . Web or belt applicator |
| 258 | | . . Rotary applicator |
| 259 | | . . . Force or fountain feed |
| 260 | | . . . Wick feed |
| 261 | | . . . With doctor or film distributing feeder engaging applicator |
| 262 | | . . . . Rotary |
| 263 | | . . Applicator movable to coating material supply |
| 264 | | . Pads or absorbent or porous applicators |
| 265 | | . . Deformable to contact supply |
| 266 | | . . Forced feed or movable transporter from coating material supply to applicator |
| 267 | | . . Gravity feed from separate coating material supply to applicator |
| 268 | | . . Wick feed to applicator |
| 269 | | . . Reversible pad and/or plural removable pad sheets |
| 270 | | . . Sponge cup type |
| 271 | | . . Heat-liquefied coating material |
| 300 | | PROJECTION OR SPRAY TYPE |
| 301 | | . With mask or stencil |
| 302 | | . With projector heating, cleaning or conditioning |
| 303 | | . Coating moving mass of solid particulate work |
| 304 | | . Projector combined with nonprojecting coater |
| 305 | | . Work-supported and guided carriage |
| 306 | | . . Inside of hollow work |
| 307 | | . . Strand, rod or bar form work |
| 308 | | . Applying solid particulate material |
| 309 | | . . Dust chamber type |
| 310 | | . . Plural supplies of particulate material |
| 311 | | . . . With common projector |
| 312 | | . . Recirculation or nonradiant heating of supply of particulate material |
| 313 | | . Plural projectors |
| 314 | | . . Work moving past sequentially arranged projectors |
| 315 | | . . Simultaneously acting on work |
| 316 | | . . . Opposed |
| 317 | | . Inside of hollow work |
| 318 | | . . Rotating work |
| 319 | | . Rotating turret work support |
| 320 | | . Rotating work |
| 321 | | . . Moving projector |
| 322 | | . . Endless conveyer for work |
| 323 | | . Moving projector |
| 324 | | . Endless conveyer for work |
| 325 | | . Flexible web or strand work |
| 326 | | . With hood or offtake for waste material |
| 400 | | IMMERSION OR WORK-CONFINED POOL TYPE |
| 401 | | . Capillary passages or barometric column feed |
| 402 | | . Floating film or layer of coating material |
| 403 | | . . Plural superposed layers of coating material in pool |
| 404 | | . Work extending through pool-confining wall area |
| 405 | | . . Running length work |
| 406 | | . Mask or stencil |
| 407 | | . Work-confined pool |
| 408 | | . . Inside separate hollow work |
| 409 | | . . Rotating work about an axis through itself during coating |
| 410 | | . . With pump or nongravity discharge against work |
| 411 | | . . . Plural pools |
| 412 | | . . Plural pools |
| 413 | | . . Movable or adjustable doctoring edge |
| 414 | | . . . Rolling doctor |
| 415 | | . . Superposed pool |
| 416 | | . Rotating work about an axis through itself during coating |
| 417 | | . Tumbling particulate work |
| 418 | | . . Rotary drums or receptacles |
| 419 | | . Running length work, longitudinally traveling |
| 420 | | . . Strand form work |
| 421 | | . With means to move tank or pool |
| 422 | | . With pool surface skimming or conditioning |
| 423 | | . With means for moving work through, into or out of pool |
| 424 | | . . Pinch rolls |
| 425 | | . . Reciprocating or oscillating conveyer |
| 426 | | . . Rotating conveyer for work |
| 427 | | . With opposed relatively movable members acting on immersed work |
| 428 | | . With work supports or guides |
| 429 | | . With tank structure, liquid supply, control, and/or nonradiant heating means |
| 500 | | WORK HOLDERS, OR HANDLING DEVICES |
| 501 | | . Combined with drip pans or surplus collection |
| 502 | | . Impaling type |
| 503 | | . Gripper or clamped work type |
| 504 | | WORK SURFACE SHIELDS, MASKS OR PROTECTORS |
| 505 | | . Work-attached |
| 506 | | MISCELLANEOUS |
| | | ****************************** |
| | | CROSS-REFERENCE ART COLLECTION |
| | | ****************************** |
| 900 | | SEMICONDUCTOR VAPOR DOPING |
| | | ****************************** |
| | | DIGESTS |
| | | ****************************** |
| DIG 1 | | Anti-offset |
| DIG 2 | | Bead coater |
| DIG 3 | | Container-related coater |
| DIG 4 | | Curtain coater |
| DIG 5 | | Fluidized bed |
| DIG 6 | | Fruit coater |
| DIG 7 | | Hoods |
| DIG 8 | | Pan greaser |
| DIG 9 | | Plank and molding coater |
| DIG 10 | | Pipe and tube (inside) |
| DIG 11 | | Pipe and tube (outside) |
| DIG 12 | | Pipe and tube (immersion) |
| DIG 13 | | Pipe and tube (misc.) |
| DIG 14 | | Roller, conical |
| DIG 15 | | Roller structure |
| DIG 16 | | Slinger type |
| DIG 17 | | Wallpaper coater |
| DIG 18 | | Wire and cord (die) |
| DIG 19 | | Wire and cord (immersion) |
| DIG 20 | | Wire and cord (roller) |
| DIG 21 | | Wire and cord (striper) |
| DIG 22 | | Wire and cord (misc.) |
![[Manual of Classification, Class Listing]](../gifs/moc.gif)
![[Classification Index]](../gifs/c_index.gif)
![[USPTO Home Page]](../gifs/home.gif)
![[Top]](../gifs/top.gif)