Subclass |
| Title |
ClassTitle
|
| ===>
CUTTING
|
| | |
861 | | OTHER THAN COMPLETELY THROUGH WORK THICKNESS OR THROUGH WORK PRESENTED |
862 | | . Combined types of cutting |
863 | | . . Including use of rotary scoring blade |
864 | | . . . Plural independent rotary scoring blades |
865 | | . . With infeeding of work |
866 | | . Pricking |
867 | | . . Including use of orbiting tool carrier |
868 | | . . With infeeding of tool |
869 | | . Edge trimming (e.g., chamfering, etc.) |
870 | | . Splitting |
871 | | . . By use of endless band or chain knife |
872 | | . . By use of rotary blade |
873 | | . . . Plural independent rotary blades |
874 | | . . With infeeding of work |
875 | | . Grooving |
876 | | . . By use of plural independent rotary blades |
877 | | . . . Forming common groove |
878 | | . . . Blades turning about perpendicular axes |
879 | | . Scoring |
880 | | . . Processes |
881 | | . . Active means to control depth of score |
882 | | . . Serially |
883 | | . . Plural independent scoring blades |
884 | | . . . Rotary scoring blades |
885 | | . . . . On opposite sides of work |
886 | | . . Rotary scoring blade |
887 | | . . . With means to rotate blade |
13 | | PROCESSES |
14 | | . With preparatory or simultaneous ancillary treatment of work |
15 | | . . By heating or cooling |
16 | | . . . At localized area (e.g., line of separation) |
17 | | . . By distorting within elastic limit |
18 | | . . . By stretching |
19 | | . . . By compressing |
20 | | . . . By flexing around or by tool |
21 | | . . . . To conform to shape of tool |
22 | | . . By fluid application |
23 | | . With subsequent handling (i.e., of product) |
24 | | . . By fluid application |
25 | | . . By retaining or reinserting product in workpiece |
26 | | . . By accelerating travel |
27 | | . . By separating products from each other |
28 | | . . By moving work support to which a tacky product is adhered |
29 | | . Including stacking of plural workpieces |
30 | | . Puncturing |
31 | | . With manipulation of tool protective strip (e.g., backing strip) |
32 | | . Cutting of interdigitating products |
33 | | . Making and using a registration cut |
34 | | . With reorientation of tool between cuts |
35 | | . With reorientation of work between cuts |
36 | | . . Relative to same tool |
37 | | . During movement of work past flying cutter |
38 | | . . Cyclically varying rate of tool or work movement |
39 | | . Plural cutting steps |
40 | | . . Blanking and cutting |
41 | | . . . Cutting to join blanked holes |
42 | | . . Repetitive transverse severing from leading edge of work |
43 | | . . . Alternately forming products of less than total width of work |
44 | | . . . With longitudinal severing |
45 | | . . . . Effected by plural steps |
46 | | . . . . Along zigzag or undulant line or cut |
47 | | . . . . Prior to transverse severing |
48 | | . . . Nonrectilinear cutting |
49 | | . . Plural cutting steps effect progressive cut |
50 | | . . Repetitive blanking |
51 | | . Cutting part way through from opposite sides of work |
52 | | . Effecting diverse or sequential cuts in same cutting step |
53 | | . Cutting by direct application of fluent pressure to work |
54 | | . Cutting wall of hollow work |
55 | | . Blanking |
56 | | . Cut advances across work surface |
57 | | WITH MANUALLY ACTUATED MEANS TO DISTURB CYCLIC OPERATION |
58 | | WITH RANDOMLY ACTUATED STOPPING MEANS |
59 | | . With means to permit subsequent hand operation |
60 | | . With stop-signal-responsive means to actuate auxiliary cutter |
61 | | . With sensing of product or product handling means |
62 | | . Responsive to tool detector or work-feed-means detector |
62.1 | | . . Responsive to tool characteristic |
63 | | . Responsive to work sensing means |
64 | | . . Of buckled work |
65 | | . . . Running loop |
66 | | . . Detector supported on or urged against work |
67 | | . . . Resiliently biased |
68 | | . Manually operated |
69 | | WITH STOPPING MEANS EFFECTIVE ON COMPLETION OF PREDETERMINED NUMBER OF TOOL CYCLES |
70 | | WITH MEANS TO ACCOMPLISH DELAYED STOPPING AFTER CESSATION OF CYCLIC OPERATION |
72 | | WITH MEANS TO MONITOR AND CONTROL OPERATION (E.G., SELF-REGULATING MEANS) |
73 | | . Including means to monitor product |
74 | | . Including means to correct the sensed operation |
75 | | . . And modify another operation |
75.5 | | . . Optimizing product from unique workpiece |
76 | | . Including means to compensate tool speed for work-feed variations |
76.1 | | WITH CONTROL MEANS RESPONSIVE TO REPLACEABLE OR SELECTABLE INFORMATION PROGRAM |
76.2 | | . For cutting component of animal; e.g., hair clipper |
76.3 | | . Removable element carries program |
76.4 | | . . Indeterminate length, web or strand |
76.5 | | . . . Magnetic |
76.6 | | . Arithmetically determined program |
76.7 | | . . With condition sensor |
76.8 | | . . . Responsive to work |
76.9 | | . . With operator input means |
77 | | WITH MEANS TO WEIGH PRODUCT |
78 | | WITH PRODUCT HANDLING MEANS |
79 | | . Initiated by means responsive to product or work |
80 | | . . Responsive to work |
81 | | . Initiated by means directly responsive to tool movement |
82 | | . . In return motion of tool |
83 | | . Including means to drape the product |
84 | | . Including means to form or hold pile of product pieces |
85 | | . . In nested relation |
86 | | . . In stacked or packed relation |
87 | | . . . Stacker sweeps along product support |
88 | | . . . Including cut pieces overlapped on delivery means |
89 | | . . . And means to separate product portions |
90 | | . . . Including means to move stack bodily |
91 | | . . . . By movement of stack holder |
92 | | . . . . . By timed relocation of holder along path of stack growth |
92.1 | | . . . . . . Interrelated adjustment of holder movement and work-feeder |
93 | | . . . And means to resist stack movement |
94 | | . . . Including means to deliver individual pieces to a stack holder |
95 | | . . . . With spindle to enter a hole or to make hole in product |
96 | | . . . . By face-engaging means to push product broadside into stacked relation |
97 | | . . . Upon emergence from hollow cutter |
98 | | . By fluid current |
99 | | . . Plural blasts directed against plural product pieces |
100 | | . . By suction means |
101 | | . By brush means |
102 | | . Including means to divert one portion of product from another |
102.1 | | . . By kerf entering guide |
103 | | . . Remaining or re-inserted product portion from base material |
104 | | . . Gravity type |
105 | | . . Deflecting guide |
106 | | . . . Positionable gate in product flow path |
107 | | . . Diverging product movers |
108 | | . Including means to replace product in base material after cutting |
109 | | . Means to move, guide, or permit free fall or flight of product |
110 | | . . Means to move product at speed different from work speed |
111 | | . . Means to move product out of contact with tool |
112 | | . . . With means to effect subsequent conveying or guiding |
113 | | . . . Out of contact with a rotary tool |
114 | | . . . . Mover surrounds axis of tool rotation |
115 | | . . . . Mover mounted on rotary tool |
116 | | . . . . . For radial movement of product |
117 | | . . . . . . Resiliently mounted |
118 | | . . . . Mover is resiliently mounted |
119 | | . . . . Pivoted mover |
120 | | . . . . . And plural rotating tools |
121 | | . . . . Stationary mover |
122 | | . . . . . And plural rotating tools |
123 | | . . . By ejector within a hollow cutter |
124 | | . . . . And means to strip the outer surface of a cutter |
125 | | . . . . Ejector operated with return stroke of cutter |
126 | | . . . . By means carried by cooperating cutter |
127 | | . . . . By cam-operated ejector |
128 | | . . . . By resiliently biased ejector |
129 | | . . . Moving stripper timed with tool stroke |
130 | | . . . . And alternatively movable to or from operating position |
131 | | . . . . Latched stripper released by tool return |
132 | | . . . . Plural strippers operative upon plural tools |
133 | | . . . . Single stripper operative upon plural tools |
134 | | . . . . Spring arm stripper |
135 | | . . . . Linkage actuated |
136 | | . . . . Carried by moving tool element or its support |
137 | | . . . . . Fluid pressure actuated stripper |
138 | | . . . . . Stripper biased against product |
139 | | . . . . . . Elastomeric stripper contacting product |
140 | | . . . . . . By spring means |
141 | | . . . . . . By free weight of stripper |
142 | | . . . . Stripper biased against product |
143 | | . . . . . Spring biased stripper |
144 | | . . . Manually operated stripper |
145 | | . . . Stationary stripper |
146 | | . . . . Stripper encircles moving tool |
147 | | . . Blockable exit port |
148 | | . . Tool conforming member interposed between tool and work |
149 | | . . Including means to move, or resist movement of, cut pieces along delivery chute |
150 | | . . Active delivery means mounted on tool support |
151 | | . . Product mover including gripper means |
152 | | . . . Suction gripper |
153 | | . . . Reciprocating product handler |
154 | | . . . Rotating or oscillating product handler |
155 | | . . Endless conveyor |
155.1 | | . . . And means to remove product therefrom |
156 | | . . Roller(s) |
157 | | . . Tiltable or withdrawable support |
158 | | . . Means to move product laterally |
159 | | . . . Oscillating means |
160 | | . . . Reciprocating means |
161 | | . . Means to move product in a nonrectilinear path |
162 | | . . Guide |
163 | | . . . Abutment in path of product being moved by work feeder |
164 | | . . . Product-diverting conduit in or from hollow tool |
165 | | . . . Inclined conduit, chute or plane |
166 | | . . . Abutment interposed in path of free fall or flight of product |
167 | | WITH RECEPTACLE OR SUPPORT FOR CUT PRODUCT |
168 | | WITH MEANS TO CLEAN WORK OR TOOL |
169 | | WITH MEANS TO APPLY TRANSIENT NONPROPELLANT FLUENT MATERIAL TO TOOL OR WORK |
170 | | WITH MEANS TO CONTROL OR MODIFY TEMPERATURE OF APPARATUS OR WORK |
171 | | . Of tool |
174 | | WITH TOOL SHARPENER OR SMOOTHER |
174.1 | | . Spatially fixed tool |
175 | | WITH MEANS TO STRETCH WORK TEMPORARILY |
176 | | WITH MEANS TO DEFORM WORK TEMPORARILY |
177 | | BY FLUID BLAST AND/OR SUCTION |
178 | | BY TOOL INSIDE HOLLOW WORK |
179 | | . Work pre-packed with internal tool(s) |
180 | | . With expanding mandrel |
181 | | . Interrelated tool feed means and means to actuate work immobilizer |
182 | | . . Actuated clamp element and work holder coact to position work |
183 | | . Synchronized tool and work feeding means |
184 | | . With means to position tool(s) for cutting |
185 | | . One tool (either internal or external) having compound motion |
186 | | . . Annulus and disc-type tool pair |
187 | | . One tool having unidirectional rotary motion |
188 | | . One tool having only rectilinear motion(s) |
189 | | . . Annulus and disc-type tool pair |
190 | | . . . A tool has a sequence of motion in plural paths |
191 | | . . Internal tool is an active cutter |
192 | | . . Multiple external active tools |
193 | | . . . Tools operate in a substantially common transverse plane of cut |
194 | | . . . . With tool actuating cams on a common support |
195 | | . With manually actuated means to position or facilitate positioning of work |
196 | | BY MEANS TO MISALIGN ALIGNED APERTURED TOOLS |
197 | | . Combined with another type tool of the class |
198 | | . Rectilinear relative movement only |
199 | | . Rotary relative movement solely about a single pivot |
200 | | . . With plural apertures in one or both carriers |
200.1 | | BY INCREASED TENSIONING OF WORK-ENCLOSING WIRE |
202 | | TOOL ENGAGES WORK DURING DWELL OF INTERMITTENT WORKFEED |
203 | | . Unicyclic |
204 | | . . Convertible to and from unicyclic |
205 | | . . Controlled by mechanical means |
206 | | . With work-moving clamp jaw |
207 | | . Work moved solely by movable abutment |
208 | | . Operation initiated by work-driven detector means to measure work length |
209 | | . Work-sensing means to control work-moving or work-stopping means |
210 | | . . With means to initiate tool feed by same control impulse |
211 | | . Work-sensing means to initiate tool feed |
212 | | . . With work-stopping abutment in sensing means |
212.1 | | . Plural tools at same station, one positioned for continuous engagement with work |
213 | | . Plural tools successively actuated at same station |
214 | | . . During one dwell period |
215 | | . Tool has motion additional to cutting stroke during tool cycle |
216 | | . . Tool has additional motion during work dwell |
217 | | . . . Included in plural cutting cycles |
218 | | . . Tool has work-feeding motion |
219 | | . With variable direction of work-feed from cycle to cycle |
220 | | . . In one of certain selected directions |
221 | | . Interlock between tool actuating and work feed means |
222 | | . Tool motion initiates work feed and vice versa |
223 | | . Stored energy means for moving work or tool, loaded by tool or work |
224 | | . . Work feed means actuates energy storage device for tool |
225 | | . Work feed means controlled by means mounted on tool or tool support |
226 | | . . Such means drives the work feed means |
227 | | . . . Work feed means carried by tool or tool support |
228 | | . . . With supplemental work feed means |
229 | | . . . On return stroke of tool |
230 | | . . Work feed means halted by means on tool or tool support |
231 | | . Work-feed mechanism in nonfeed motion effects or initiates tool actuation |
232 | | . . By striking tool actuator |
233 | | . . . Nonfeed motion is reverse to feed motion |
234 | | . With means to vary number of work-feed increments between tool strokes |
235 | | . Dwell caused by imposing reverse motion on portion of flexible moving work |
236 | | . With uninterrupted flow of work from supply source |
237 | | . Work feed increment shorter than longitudinal tool field |
238 | | . Unequal work feed increments in recurring series |
239 | | . . Work carriage carries ratchet means to determine increments |
240 | | . Means to change tool position, or length or datum position of work- or tool-feed increment |
241 | | . . With means to vary magnitude of work-feed increment |
242 | | . . . Multi-increment type (e.g., ticket issuing) |
243 | | . . . . Length selector initiates machine operation |
244 | | . . . By change in length of one member of feed-driving linkage |
245 | | . . . . Rotating member |
246 | | . . . By change of effective shape of driving or driven surface of element of work-feed mechanism |
247 | | . . . By adjustment of fixed stop |
248 | | . . With means to vary magnitude or base position of tool stroke |
249 | | . With means to facilitate manual repositioning (shift) of work |
250 | | . With means to produce plurality of work-feed increments per tool cycle |
251 | | . . Including supplemental work-feed means |
252 | | . . . Manual |
253 | | . . . With stop adapted to engage abutment surface on work |
254 | | . . . . Plurality of work stops successively effective |
255 | | . Work fed successively to plural tools |
256 | | . . With change of direction between tools |
257 | | . Work advance occurs during return stroke of tool |
258 | | . Dwell defined only by "dead-center" of rotating crank |
259 | | . Dwell initiated by disengagement of surface of moving frictional feed means from work |
260 | | . . Feed means has interrupted frictional surface |
261 | | . . Feed means has rotary motion |
262 | | . Dwell caused by clamping or blocking work during continuous operation of feed means |
263 | | . With means to control magnitude of work-feed increment or work acceleration |
264 | | . . Means to prevent random or excessive work feeds |
265 | | . . Full stroke required of feed means |
266 | | . Work feed functions as tool support |
267 | | . With rotary work-carrier |
268 | | . With abutment to position work being fed with respect to cutter |
269 | | . . With slip between positioned work and feed means |
270 | | . Work guide and feed means have open side |
271 | | . Work feed means modified to maintain clearance from tool |
272 | | . Plurality of work feed means in separate paths |
273 | | . Intermittent drive type of gearing for work-feed means |
274 | | . . Gearing modified to lock the work-feed means |
275 | | . . Mutilated gear in mesh with gear driving work-feed means |
276 | | . Work-feed element contacts and moves with work |
277 | | . . Comprises a work-moving gripper |
278 | | . . Comprises element entering aperture in, or engaging abutment surface on, work |
279 | | . With means to guide, position, or present work to work-feed means |
280 | | . . Means to transport work to work-feed means |
281 | | . . . Including means to pick articles from pack or stack |
282 | | . With means to clamp work during dwell |
283 | | . One-revolution clutch in tool drive |
284 | | CUTTING MOTION OF TOOL HAS COMPONENT IN DIRECTION OF MOVING WORK |
285 | | . With means to initiate intermittent tool action |
286 | | . . Tool moved in response to work-sensing means |
287 | | . . . With means to vary "length" of product |
288 | | . . . . To vary an end-product "length" (e.g., "crop cut") |
289 | | . . . With photo-electric work-sensing means |
290 | | . . . With trip-switch work-sensing means |
291 | | . . . . To initiate feed movement of tool |
292 | | . . . . . And to initiate flying movement of tool |
293 | | . . . With work-responsive means to initiate flying movement of tool |
294 | | . . . . With flying work-gripper means related to tool carrier |
295 | | . . . . With means controlling flying speed dependent on work speed |
296 | | . . With means to vary frequency of initiation |
297 | | . . . By orbitally traveling trigger pin(s) |
298 | | . Interrelated control of tool and work-feed drives |
299 | | . With means to concurrently adjust flying frequency and retain flying speed of tool |
300 | | . Plural diverse flying cutters |
301 | | . Combined with other type cutter |
302 | | . . With slitter |
303 | | . Plural separately mounted flying cutters |
304 | | . With means to render cutter pass(es) ineffective |
305 | | . . With means to produce "mis-cut" |
306 | | . Oscillating work shifter adjacent cutter |
307 | | . . Work actuated senser initiates shifter |
307.1 | | . Wire tool |
307.2 | | . . On tool support having reciprocation parallel to direction of work-feed |
307.3 | | . . . And rotation about axis parallel to direction of work-feed |
308 | | . Tool flies by engagement with the work |
309 | | . . Tool merely flexes with moving work |
310 | | . Flying support or guide for work |
311 | | . With tool speed regulator |
312 | | . With work feed speed regulator |
313 | | . . With means to vary cyclically speed of work |
314 | | . Spring return of tool in counterfly direction |
315 | | . Tool mounted on oscillating standard |
316 | | . . Both tools of couple on single standard |
317 | | . . . One tool swings out of work path on return stroke |
318 | | . Tool carrier shuttles rectilinearly parallel to direction of work feed |
319 | | . . Including means to secure work to carrier |
320 | | . . Both members of cutting pair on same carrier |
321 | | . Orbital motion of cutting blade |
322 | | . . Work feeder mounted on tool support |
323 | | . . . Gripper-type feeder |
324 | | . . Tool speed varied within each orbital cycle |
325 | | . . Work feed gripper carried on endless belt |
326 | | . . Endless belt or chain tool carrier |
327 | | . . Constantly oriented tool with arcuate cutting path |
328 | | . . . Cutting couple type |
329 | | . . Rotatable disc-type tool on orbiting axis |
330 | | . . . Idling disc |
331 | | . . Rotary tool |
332 | | . . . Segmented disc slitting or slotting tool |
333 | | . . . With undulant cutting edge (e.g., "pinking" tool) |
334 | | . . . Single tool action drive |
335 | | . . . . With one-revolution drive |
336 | | . . . With loop former preceding tool |
337 | | . . . Compound movement of tool during tool cycle |
338 | | . . . . Axial reciprocation of tool |
339 | | . . . Interconnected work feeder and tool driver |
340 | | . . . Side cutting helical blade |
341 | | . . . With means to cause progressive transverse cutting |
342 | | . . . . With helical cutter blade |
343 | | . . . With cooperating rotary cutter or backup |
344 | | . . . . Cooperating tool axes adjustable relative to each other |
345 | | . . . . With radial overlap of the cutting members |
346 | | . . . . With anvil backup |
347 | | . . . . . With resilient anvil surface |
348 | | . . . . Resiliently urged cutter or anvil member |
349 | | . . . With cooperating stationary tool |
350 | | CUTTER WITH TIMED STROKE RELATIVE TO MOVING WORK |
351 | | . Work swings about progressively cutting tool during tool stroke |
352 | | . Tool actuated by movable work support |
353 | | . Traveling cutter |
354 | | . With means to vary timing of tool feed |
355 | | . Uniform periodic tool actuation |
356 | | . . With periodic lateral feed of tool or work |
356.1 | | . . With plural tool stations |
356.2 | | . . Reciprocating tool |
356.3 | | . . With plural tools on a single tool support |
357 | | . With plural tool stations |
358 | | OPERATION CONTROLLED BY MEANS RESPONSIVE TO PRODUCT |
359 | | . Actuation of tool controlled |
360 | | OPERATION CONTROLLED BY DETECTOR MEANS RESPONSIVE TO WORK |
361 | | . With means to control work-responsive signal system |
362 | | . . To delay response to work-senser |
363 | | . . To change length of product |
364 | | . With plural work-sensing means |
365 | | . With photo-electric work-sensing means |
366 | | . Release of interlock controlled |
367 | | . Movement of work controlled |
368 | | . Positioning of tool controlled |
369 | | . Actuation of tool controlled by work-driven means to measure work length |
370 | | . Actuation of tool controlled in response to work-sensing means |
371 | | . . Sensing means responsive to work indicium or irregularity |
372 | | . . With trip-switch in work-sensing mechanism |
373 | | INTERRELATED TOOL ACTUATING AND WORK GUIDE MOVING MEANS |
374 | | INTERRELATED TOOL ACTUATING MEANS AND MEANS TO ACTUATE WORK IMMOBILIZER |
375 | | . Work clamp |
376 | | . . Tool deflected by guide on tightened clamp |
377 | | . . . With means to control clamping force |
378 | | . . Clamp driven by reaction from tool force |
379 | | . . With means providing for plural steps in clamping stroke |
380 | | . . With sequencing means |
381 | | . . With provision for manual control of clamp |
382 | | . . Tool or tool support on movable clamp jaw |
383 | | . . Clamp moved by direct impact of tool or tool support |
384 | | . . . Clamp retracted by impact of tool or tool support |
385 | | . . Clamp actuating means driven by tool or tool support |
386 | | . . . Clamp yieldably driven by tool or tool support |
387 | | . . . . With resilient drive element |
388 | | . . Clamp driven by yieldable means |
389 | | . . . Drive means is resilient |
390 | | . . . Fluid pressure yieldable drive means |
391 | | . Work-stop abutment |
392 | | . . Oppositely effective abutments |
393 | | . . With cyclic means to alter work-stopping position |
394 | | . . Stop partakes of tool motion |
395 | | . . . Carried by tool or tool support |
396 | | INTERRELATED TOOL ACTUATING MEANS AND MEANS TO ACTUATE WORK-MOVER STOP |
397 | | INTERRELATED TOOL ACTUATING MEANS AND GUARD MEANS |
397.1 | | . Work guard |
398 | | . Cutter guide slot closer |
399 | | OPERATION OF MEMBER CONTROLLED BY MEANS RESPONSIVE TO POSITION OF ELEMENT REMOTE FROM MEMBER (E.G., INTERLOCK) |
400 | | . With means to initiate operation of member |
401 | | WITH MEANS TO CONVEY WORK RELATIVE TO TOOL STATION |
402 | | . By fluid current |
403 | | . Centrifugal feed to tangential tool (e.g., "Beria" type) |
403.1 | | . With means to regulate work-feed speed |
404 | | . Including means to move work from one tool station to another |
404.1 | | . . Tool stations angularly related |
404.2 | | . . . Work manipulated between tool stations |
404.3 | | . . . With static tool |
404.4 | | . . Tool stations staggered relative to one another |
405 | | . . Punch or die station |
406 | | . . Notcher or pinker station |
406.1 | | . . Work reciprocated past double-edged knife |
407 | | . . Slitter station |
408 | | . . . And transverse cutter station |
703 | | . Plural passes of diminishing work piece through tool station |
704 | | . . Work alternately, angularly re-oriented relative to tool station |
705 | | . . . By additional means to engage work and orient it relative to tool station |
706 | | . . . By roller or roll-like element |
707 | | . . Work rectilinearly reciprocated through tool station |
708 | | . . . With means to cause or permit angular re-orientation of work about axis parallel to plane of cut |
709 | | . . . . By endless member having work-engaging teeth |
710 | | . . . . By member having work-engaging tooth |
711 | | . . . . . Including plural work-engaging teeth |
712 | | . . . . . . Fluid operated |
713 | | . . . With means to cause movement of work transversely toward plane of cut |
714 | | . . . . By means to cause movement toward and away from plane of cut |
715 | | . . . . . Actuated by movement of a member on reciprocating means |
716 | | . . . . . Actuated by passive means which is external to reciprocating means |
717 | | . . . . By means to define increment of movement toward plane of cut |
718 | | . . . . . Interrelated with movement of reciprocating means |
719 | | . . . . . By pusher mechanism |
720 | | . . . . . . With additional work holding or positioning means |
721 | | . . . . . . . Work holding means includes actuator |
722 | | . . . . . . Including plural, simultaneously acting pusher elements |
723 | | . . . . . . . Independently adjustable |
724 | | . . . . . . . With additional means to retract elements |
725 | | . . . . . . . Power derived from movement of reciprocating means |
726 | | . . . . . . . Power derived from fluid pressure means |
727 | | . . . . . . . Movement by screw means |
728 | | . . . . . . . Movement by rack and pinion or pawl |
729 | | . . . . . . With handle |
730 | | . . . . . By carriage |
731 | | . . . By cable or belt drive |
732 | | . With means for transverse positioning of work on a moving conveyor |
409 | | . With work-constraining means on work conveyer (i.e., "work-carrier") |
409.1 | | . . Plural means to constrain plural work pieces |
409.2 | | . . . End of work protrudes through aperture in carrier |
410 | | . . With means to guide work-carrier in nonrectilinear path |
410.7 | | . . . About axis fixed relative to tool station |
410.8 | | . . . . Infeed |
410.9 | | . . . . . About vertical axis |
411.1 | | . . . . . . Cut normal to axis |
411.2 | | . . . . . . . Work-guide tube |
411.3 | | . . . . . Cut normal to axis |
411.4 | | . . . . . . Oscillating work-carrier |
411.5 | | . . . . . . Multiple cutters |
411.6 | | . . . . . . . Coaxial rotary cutters |
411.7 | | . . . . Work stationary during cut |
412 | | . . With means to orient or position work carrier relative to tool station |
413 | | . . . By pattern or templet |
414 | | . . . By indexing means |
415 | | . . With additional work-locating means on work-carrier |
416 | | . With means to stop work conveyor |
417 | | . With means to store work articles |
418 | | . With additional mans to engage work and orient it relative to tool station |
419 | | . . By work-stopping abutment |
420 | | . . By opposed lateral guide means |
421 | | . . With means to adjust additional means |
422 | | . With means to press work to work-carrier |
423 | | . With projections on work-carrier (e.g., pin wheel) |
424 | | . Tool between tandem arranged work carrying means |
425 | | . Cut made parallel to direction of and during work movement |
425.1 | | . . Including nonconcurrently acting tool |
425.2 | | . . Including plural, laterally spaced tools |
425.3 | | . . . Tools mounted on common tool support |
425.4 | | . . . . Tools axially shiftable on support |
426 | | . . Interrelated work-conveying and tool-moving means |
427 | | . . . With reciprocating tool (e.g., "jigsaw" type) |
428 | | . . . With means to move tool laterally of feed direction during cutting |
429 | | . . . With means to effect difference between work speed and tool speed |
430 | | . . . Tool co-axial with work-conveying means |
431 | | . . With means to press work to tool |
432 | | . . Bevel cutting tool |
433 | | . . Tool shiftable relative to work-conveying means |
434 | | . . Tool in contact with surface of work-conveying means |
435 | | . . Tool between laterally spaced work-conveying means |
435.11 | | . . By rectilinearly moving work carriage |
435.12 | | . . . Angularly adjustable |
435.13 | | . . . . Having positive adjustment stop; e.g., link |
435.14 | | . . . . Having position indicating means |
435.15 | | . . . Pusher engaging rear surface of work |
435.16 | | . . . . Having means to actuate pusher |
435.17 | | . . . . . Hydraulic or pneumatic means |
435.18 | | . . . . . Gear or pulley actuated pusher |
435.19 | | . . . . . Lever, cam, or link actuated pusher |
435.21 | | . . . Having means to actuate carriage |
435.22 | | . . . . Hydraulic or pneumatic means |
435.23 | | . . . . Gear or pulley |
435.24 | | . . . . . Adapted to place tension on flacid member |
435.25 | | . . . . Lever, cam, or link means |
435.26 | | . . . On or attached to vehicle |
435.27 | | . . . Supported for movement at one side of tool only |
435.2 | | . . By work moving flexible chain or conveyor |
436.1 | | . . By feed roller |
436.15 | | . . . Pinch rollers |
436.2 | | . . Unattached manual work pusher |
436.3 | | . Roller |
436.4 | | . . Plural independent rollers for feed of plural distinct work |
436.45 | | . . Shaped to conform to work |
436.5 | | . . With work-supplying reel |
436.55 | | . . . And provision for selecting feed length |
436.6 | | . . Continuous conveying during , cutting; e.g., straw cutting |
436.7 | | . . Supporting work at cutting station |
436.75 | | . . . Comprising part of cutting station |
436.8 | | . . Tool and feed roller actuated by common handle |
436.9 | | . . Tool and roller on common movable support |
437.1 | | . Rectilinear movement only |
437.2 | | . . Tool opposing pusher |
437.3 | | . . . Hydraulically or pneumatically actuated |
437.4 | | . . . Screw actuated |
437.5 | | . . . Gear or pulley actuated |
437.6 | | . . . Lever, cam, or link actuated |
437.7 | | . . . Spring or gravity urged |
733 | | . Work carrier rotates about axis fixed relative to tool station |
734 | | . Interrelated work-feeding means and tool-moving means |
743 | | TOOL CARRIER OR GUIDE AFFIXED TO WORK DURING CUTTING |
744 | | . By flexible work-engaging member |
745 | | . Entirely work supported |
746 | | BY TOOL RECIPROCABLE ALONG ELONGATED EDGE |
747 | | . With means permitting tool to be rotatably adjusted about its cutting edge during cutting |
748 | | . With dynamic balancing or shock absorbing means |
749 | | . With tool of another type |
750 | | . With means to change to other type tool |
751 | | . Plural reciprocable tools |
752 | | . Stored energy furnishes drive in one direction |
753 | | . With tool in-feed |
754 | | . . And auxiliary means for promoting or retarding tool in-feed |
755 | | . . . By yieldable means |
756 | | . . . And means to vary tool in-feed speed |
757 | | . . . With interrelated tool actuating and in-feed means |
758 | | . . Of rectilinearly reciprocating tool |
759 | | . . . With in-feed by pivoting carrier |
760 | | . . And means to prevent tool in-feed |
761 | | . . With passive means to guide tool directly |
762 | | . . . By plural opposed guide surfaces |
763 | | . . . . Having relative adjustment between guide surfaces |
764 | | . . . . With relative adjustment between guide and work or work-support |
765 | | . . . . . By or with additional movable work-support portion |
766 | | . . . . . By rotation about an axis parallel to the work-support surface |
767 | | . . . . . By rotation about an axis perpendicular to the work-support surface |
768 | | . . Including means to cause nonrectilinear tool infeed |
769 | | . . Of arcuately oscillating tool |
771 | | . . Of tool carrier on single moving pivot |
772 | | . . . Pivot moves in closed loop |
773 | | . . . Pivot moves to and fro in arcuate path |
774 | | . . . . Axis of arcuate path moves during cutting |
775 | | . . . Pivot moves to and fro in rectilinear path |
776 | | . Having uniplanar compound motion |
777 | | . . By plural arcuately oscillating carrier |
778 | | . . Constantly oriented tool travelling in orbit |
779 | | . . Tool rocks cutting reciprocations |
780 | | . . . One tool reciprocates along fixed guide element |
781 | | . With work-support and means to vary relationship between tool and work support |
782 | | . Arcuately oscillating tool carried on single pivot |
783 | | . With means to support tool at opposite ends |
784 | | . . And apply drive force to both ends of tool |
785 | | . . . By flexible drive means |
786 | | . . . By reciprocating rigid support |
788 | | BY ENDLESS BAND OR CHAIN KNIFE |
789 | | . With programming means |
790 | | . With cutter other than endlessly orbiting type |
792 | | . Including contiguous oppositely moving knife portions |
793 | | . With means to change to non-endlessly orbiting cutter |
794 | | . With tool in-feed |
795 | | . . Including ground-traversing vehicle |
796 | | . . Including means to permit arcuate in-feed motion |
797 | | . . . Including means to relocate path of in-feed motion |
798 | | . . . . Angular relative previous path |
799 | | . . By gravity |
800 | | . . . With fluid in-feed regulating means |
801 | | . . By motor-driven mechanism |
802 | | . With scale or indicator |
803 | | . Including plural cutting zones |
804 | | . . With adjustment of separation between zones |
805 | | . . . By lever means |
806 | | . . . By screw-threaded means |
807 | | . . Including "figure-8" band |
808 | | . . Comprising plural bands |
809 | | . Including means to adjust relationship between band and work-support surface |
810 | | . . By varying angle between band and work-support surface |
811 | | . . . By tilting band carrier |
812 | | . . . . About point of intersection of cutting span and work-support surface |
813 | | . . By varying distance between band and work-support surface |
814 | | . With means to guard the tension |
815 | | . . Including means to retard undriven pulley or sprocket |
816 | | . . With means to vary distance between pulley or sprocket axes |
817 | | . . . And angular relationship of axes |
818 | | . . . Including means to yieldably bias pulley |
819 | | . . . . By fluid means |
820 | | . With special blade guide means |
438 | | WITH MEANS TO GUIDE MOVING WORK |
439 | | . In pivotal or arcuate movement |
440 | | . Guide fixed to or integral with stationary tool element |
440.1 | | . . Tool element cooperates with a second tool |
440.2 | | . With guard |
441 | | . With attachment or operative connection to tool carrier |
441.1 | | . With attachment or operative connection to passive tool guide |
442 | | . Guide cooperates with template or straight edge secured to work |
443 | | . Curved or deflecting guide |
444 | | . Positively confines or otherwise determines path of work |
445 | | . Adapted to permit maneuvering of work at tool zone |
446 | | . With movable or yieldable guide element |
447 | | . . Opposed to work-supporting surface |
448 | | . Plural guide elements |
449 | | . . Opposed |
450 | | . Opposed to work-supporting surface |
451 | | WITH WORK IMMOBILIZER |
452 | | . Means to clamp work |
453 | | . . Combined with, peculiarly related to, other element |
454 | | . . . With or to tool guide |
455 | | . . . Guide for traveling cutter |
456 | | . . . Tool or tool support on movable clamp jaw |
457 | | . . With means providing for plural steps in clamping stroke |
458 | | . . With equalizer or self-aligning jaw |
459 | | . . With biasing or counterbalancing means |
460 | | . . Clamp driven by yieldable means |
461 | | . . Liquid pressure actuating means |
462 | | . . Including means to retain clamp jaw in position |
463 | | . . Self-locking drive means |
464 | | . . Manually actuated drive means |
465 | | . . Including clamping face of specific structure |
466 | | . . With means to adjust clamp position or stroke |
466.1 | | . Gapped work-constrainer |
467.1 | | . Work-stop abutment |
468 | | . . With scale or indicator |
468.1 | | . . Normal to plane of cut |
468.2 | | . . . Adjustable |
468.3 | | . . . . Angularly relative to plane of cut; e.g., miter |
468.4 | | . . . With traversing cutter guide; e.g., cut-off saw |
468.5 | | . . Collapsible |
468.6 | | . . Retractable |
468.7 | | . . Adjustable |
468.8 | | . . . Having curved cutting edge to make arcuate cut, plural nonaligned intersecting cutting edges, or spaced punches |
468.9 | | . . . . Spaced edges |
468.93 | | . . Having curved cutting edge to make arcuate cut, plural nonaligned intersecting cutting edges, or spaced punches |
468.94 | | . . . Spaced edges |
469 | | ROTATABLE DISC TOOL PAIR OR TOOL AND CARRIER |
471 | | . With means to support work relative to tool(s) |
471.1 | | . . Plural tool elements successively actuated at same station |
471.2 | | . . Tool moved relative to work-support during cutting |
471.3 | | . . . Tool angularly adjustable relative to work-support |
472 | | . . Supporting surface and tool axis angularly related |
473 | | . . . Adjustable angular relationship |
474 | | . . Unidirectionally movable work support |
475 | | . . . With opposed work-presser |
476 | | . . . . Presser co-axial with tool |
477 | | . . Support and tool relatively adjustable |
477.1 | | . . . By movement of the tool |
477.2 | | . . Work-support includes passageway for tool (e.g., slotted table) |
478 | | . With guard for tool |
479 | | . Optional tool pairs alternatively operative |
480 | | . . One element of tool pairs common to all pairs |
481 | | . With means to permit replacement of tool |
482 | | . Means to separate elements of tool pair |
483 | | . Carrier for rotatable tool movable during cutting |
484 | | . . Unicyclic movement |
485 | | . . Tool carrier reciprocable rectilinearly |
486 | | . . . With means to adjust path of reciprocation |
486.1 | | . . . . Angular relative to previous path |
487 | | . . . With means to reciprocate carrier |
488 | | . . . . And means to rotate tool |
489 | | . . . With means to rotate tool |
490 | | . . Tool carrier oscillated or rotated |
491 | | . Means to rotate or oscillate tool |
492 | | . . Including means to rotate both elements of tool pair |
493 | | . . . Including means to rotate both elements at different speeds |
494 | | . . . And means to change speed of rotation |
495 | | . Tool pair comprises rotatable tools |
496 | | . . Tool pair elements angularly related |
497 | | . . . Elements of tool pair angularly adjustable relative to each other |
498 | | . . Tool pair axially shiftable |
499 | | . . . With shifting mechanism for at least one element of tool pair |
500 | | . . Tool pair comprises contacting overlapped discs |
501 | | . . . With means to effect axial pressure on pair |
502 | | . . . . With means to change axial pressure |
503 | | . . . With means to change overlap of discs |
504 | | . . Tool element axially shiftable |
505 | | . . Tool pair comprises disc and cylindrical anvil |
506 | | . . . With adjustable means to urge tool elements together |
507 | | . . Elements of tool pair adjustably spaced |
508 | | . Tool pair comprises rotatable tool and nonrotatable tool |
508.1 | | . Tool element selectively operative |
508.2 | | . Tool element mounted for adjustment |
508.3 | | . . Plural, axially spaced tool elements |
509 | | TOOL PAIR COMPRISES ROTATABLE ANVIL AND FIXED-TYPE TOOL |
510 | | . Anvil has motion in addition to rotation (i.e., traveling anvil) |
511 | | . . Additional motion is along fixed arcuate path |
512 | | . . With plural anvils |
513 | | TWO TOOL PAIRS, DRIVER FOR ONE PAIR MOVES RELATIVE TO DRIVER FOR OTHER PAIR |
514 | | . One tool support acts as driver for other |
515 | | . . Punch and shear |
516 | | . With variable spacing between tool pairs |
517 | | . . With intermediate work support |
518 | | . Punch and shear |
519 | | . Successively acting |
520 | | WITH ILLUMINATING OR VIEWING MEANS FOR WORK |
521 | | . Mirror or lens |
522.11 | | WITH SIGNAL, SCALE, OR INDICATOR |
522.12 | | . Signal; e.g., alarm |
522.13 | | . Indicator comprising work or product |
522.14 | | . Responsive to force |
522.15 | | . Indicates tool position |
522.16 | | . . Relative to another element |
522.17 | | . . . To work-engaging member |
522.18 | | . . . . Calibrated scale or indicator |
522.19 | | . . . . . Indicates dimension of work being cut |
522.21 | | . . . . . . Dynamic indicator |
522.22 | | . . . To another tool assembly |
522.23 | | . . . To cooperating tool |
522.24 | | . . . To another component of tool assembly |
522.25 | | . . . Adjustable guide for traversing tool; e.g., radial saw guide or miter saw guide |
522.26 | | . Indicates work characteristic |
522.27 | | . Indicates wear |
522.28 | | . Bubble level |
522.29 | | . Counter |
523 | | MEANS TO DRIVE OR TO GUIDE TOOL |
524 | | . Unicyclic |
525 | | . . With adjustable stopping point or tool |
526 | | . . With brake or blocking means |
527 | | . Means to change datum plane of tool or tool presser stroke |
528 | | . . For disabling of continuously actuated cutter |
529 | | . . With adjustable stop |
530 | | . . By varying length of tool stroke |
531 | | . Clicker die press |
532 | | . . With die handling attachment |
533 | | . . With reciprocating presser |
534 | | . . . Laterally movable to selective operative positions |
535 | | . . . . Pivotal or revolving only |
536 | | . . . . . With means to impart, limit, or control pivotal motion of presser |
537 | | . . . . . . Interrelated with presser reciprocating means |
538 | | . . . . . With means to mount presser for oscillation about column |
539 | | . . . With adjustable bed block |
540 | | . . . Including presser member reinforcing, or flexure compensating, means |
541 | | . . . With manually actuated control apparatus for reciprocation of presser member |
542 | | . By deforming resilient tool or tool support |
543 | | . With transmission yieldable on overload |
544 | | . With guard means |
545 | | . . Static |
546 | | . . . Adjustable |
547 | | . Including movable, tool protecting, cushioning sheet |
548 | | . Single tool with plural selective driving means |
549 | | . Plural tools selectively engageable with single drive |
550 | | . . Predetermined sequence of selection |
551 | | . . . Of paired tools |
552 | | . . Turret of tools |
553 | | . Tool movable to cooperate selectively with one of a plurality of mating tools |
554 | | . With means providing for plural steps in tool stroke |
555 | | . Sequential cutting motions |
556 | | . With tool positioning means synchronized with cutting stroke |
557 | | . . Anvil moves into and out of operative position |
558 | | . . Straight line positioning |
559 | | . Tool pair positionable as a unit |
560 | | . . Straight line positioning |
561 | | . Tool and anvil relatively positionable |
562 | | . . Straight line |
563 | | . Tool displaceable to inactive position (e.g., for work loading) |
564 | | . . By pivotal motion |
565 | | . With templet surface following tool |
566 | | . Tool moves work to and against cooperating tool |
567 | | . . With means to clamp or bind work to moving tool |
568 | | . . One tool resiliently mounted or biased |
569 | | . . Work forced through tool aperture or between spaced cooperating tools |
570 | | . . Manually actuated work-moving tool |
571 | | . With means to connect or disconnect tool and its drive |
572 | | . . Continuously moving drive means (e.g., "gag") |
573 | | . . . Hand actuated connecting means |
574 | | . Convertible from tool path to another or from implement to machine |
575 | | . Magnet- or solenoid-actuated tool |
576 | | . . Tool movement modifies actuating circuit |
577 | | . . Solenoid core is tool or tool support |
578 | | . Cutting tool operative in opposite directions of travel |
579 | | . Motion direction of tool influenced by resistance of work |
580 | | . One tool edge of tool pair encompasses work (e.g., wire cutter) |
581 | | . Bevel or miter cut |
581.1 | | . With tool tensioning means |
582 | | . Constantly urged tool or tool support (e.g., spring biased) |
583 | | . . Ledger blade |
584 | | . . Oscillating tool urged axially |
585 | | . . . And urged about pivotal axis |
586 | | . . Stored energy furnishes cutting force |
587 | | . . . With reset |
588 | | . . Through return (noncutting) stroke |
589 | | . . . Oscillating tool |
590 | | . Tool return mechanism separate from tool advance mechanism |
591 | | . With simple revolving motion only |
592 | | . . Tool mounted on radial face of rotor |
593 | | . . Variable speed during one revolution (e.g., intermittent) |
594 | | . . Revolving tool moves through recess in work holder or cooperating tool |
595 | | . . . Progressively cutting |
596 | | . . Progressively cutting |
597 | | . With simple oscillating motion only |
598 | | . . Plural tool pairs |
599 | | . . . Plural tools on single oscillating arm (i.e., tool holder) |
600 | | . . And means to move cooperating cutter member |
601 | | . . Tool driver movable relative to tool support |
602 | | . . . Cam or eccentric revolving about fixed axis |
603 | | . . . Gear or ratchet pawl drives toothed tool support |
604 | | . . . Toggle links, one link pivoted to tool support |
605 | | . . . Fixed axis lever |
606 | | . . . . Adjustable mechanical advantage |
607 | | . . Cutting edge in radial plane |
608 | | . . . Adjustable |
609 | | . . . With guide means for the cutting member |
610 | | . . Axially entending cutting edge |
611 | | . . . Axially progressing cut |
612 | | . . . Adjustable |
613 | | . With simple rectilinear reciprocating motion only |
614 | | . . Edge-to-edge of sheet or web (e.g., traveling cutter) |
615 | | . . With provision for dynamic balance |
616 | | . . With lost motion in tool drive |
617 | | . . Means to vary force on, or speed of, tool during stroke |
618 | | . . Plural tools with same drive means |
619 | | . . . Tools positioned by template |
620 | | . . . Plural distinct cutting edges on same support |
621 | | . . . . Concentrically mounted |
622 | | . . . . Successively acting |
623 | | . . And means to move cooperating cutting member |
624 | | . . With application of force to opposite ends of tool supporting crosshead |
625 | | . . . By relatively movable fixed axis levers |
626 | | . . . By connecting rod articulated with tool support |
627 | | . . Tool driver movable relative to tool support |
628 | | . . . Cam or eccentric revolving about fixed axis |
629 | | . . . Gear actuated tool support |
630 | | . . . Toggle links, one link pivoted to tool support |
631 | | . . . Screw actuated tool support |
632 | | . . . Connecting rod articulated with tool support |
633 | | . . . Fixed axis lever |
634 | | . . . . Adjustable mechanical advantage |
635 | | . . . Including details of guide for tool or tool support |
636 | | . . Progressively cutting |
637 | | . . With spaced guide pins (e.g., die set leader pins) |
638 | | . . With inclined guides |
639.1 | | . . Fluid pressure actuated |
639.2 | | . . . Utilizing fluid amplifier |
639.3 | | . . . Diaphragm |
639.4 | | . . . Explosive fluid |
639.5 | | . . . Plural cylinders |
639.7 | | . . . Offset cutter |
640 | | . . With means to adjust tool position on tool holder |
641 | | . . . Adjustably mounted cooperating tool |
642 | | . Parallel draw-cut (e.g., translatory) |
643 | | . . Link suspension |
644 | | . Straight line motion combined with tilting in plane of stroke |
646 | | . Uniplanar compound motion |
647 | | . . Reciprocating plus work approach (e.g., saw type) |
647.5 | | . . With gyratory drive |
821 | | . Guide |
823 | | . . With nonrigidly positioned member |
824 | | . . With anti-friction means |
825 | | . . . Roller with peripheral flange or groove |
826 | | . . . Disc |
827 | | . . With means to vary space between opposed members |
828 | | . . . By rectilinear movement of member |
829 | | . . With means to adjust position |
648 | | TOOL WITH EITHER WORK HOLDER OR MEANS TO HOLD WORK SUPPLY |
649 | | . Rotatable wound package supply |
650 | | . . Plural supply sources |
830 | | CUTTER ASSEMBLAGE OR CUTTER ELEMENT THEREFOR (E.G., CHAIN SAW CHAIN) |
831 | | . With means permitting removal of cutter element |
832 | | . Having diverse cutting elements |
833 | | . . And noncutting depth gauge |
834 | | . Having noncutting depth gauge |
651 | | TOOL OR TOOL WITH SUPPORT |
651.1 | | . Wire tool |
652 | | . Work supported tool (e.g., clicker die) |
653 | | . . With product ejection facilitator |
654 | | . . With tool manipulating portion |
655 | | . . With tool positioning abutment |
656 | | . . To sever article from work and cut within article |
657 | | . . With tool contour adjusting means |
658 | | . Anvil |
659 | | . . Rotatable type |
660 | | . Pointed perforators |
661 | | . Endless band or belt type |
835 | | . Toothed blade or tooth therefor |
836 | | . . With means to vary tooth position |
837 | | . . With additional cutting means |
838 | | . . Plural separable sections |
839 | | . . . Tooth separable from blade |
840 | | . . . . By independent connecting element |
841 | | . . . . . Transversely movable |
842 | | . . . . . Arcuately movable |
843 | | . . . . . . With additional element to prevent movement of connecting element |
844 | | . . . . . Rectilinearly movable |
845 | | . . . . By deformation |
846 | | . . Uniformly varying teeth or tooth spacing |
847 | | . . Undulating tooth arrangement |
848 | | . . Plural tooth groups |
849 | | . . . Including raker tooth group |
850 | | . . . Including intermediate raker tooth |
851 | | . . Series of dissimilar teeth |
852 | | . . Series of allochiral teeth |
853 | | . . Teeth having transversely curved cutting edge |
854 | | . . Teeth having cutting edge parallel to blade surface |
855 | | . . Teeth having cutting edge perpendicular to blade surface |
662 | | . Tool mounted by and between spaced arms |
663 | | . Rotatable type |
664 | | . . With spacer interposed between shaft-mounted tools |
665 | | . . Mounting of tool about rod-type shaft |
666 | | . . . At end of shaft |
667 | | . . Punching plus nonpunching tool |
668 | | . . Notching plus nonnotching tool |
669 | | . . Punching tool |
670 | | . . . Shear type |
671 | | . . Notching tool |
672 | | . . Helical tool |
673 | | . . Shear type |
674 | | . . . Cutting edge wholly parallel to axis of rotation |
675 | | . . . Cutting edge wholly normal to axis of rotation |
676 | | . . Disc type |
677 | | . . Radially adjustable tool |
678 | | . . Spaced cut forming tool |
679 | | . Cutting couple type |
680 | | . . Spiral type cutter |
681 | | . . To punch and cut punched article |
682 | | . . Punching plus nonpunching tool |
683 | | . . Notching plus nonnotching tool |
684 | | . . Punching tool |
685 | | . . . Tool pair |
686 | | . . . Shear-type male tool |
687 | | . . . . Multiple punchings |
688 | | . . . . Plural spaced successively operative shearing portions |
689 | | . . . . Progressive cutting |
690 | | . . . Shear-type female tool |
691 | | . . . Multiple punchings |
692 | | . . Notching tool |
693 | | . . . Shear type |
694 | | . . Shear type |
695 | | . . Spaced cut forming tool |
696 | | . . With tool contour adjusting means |
697 | | . Reciprocable type |
698.11 | | . Joint or connection |
698.21 | | . . Magnetic connection |
698.31 | | . . Resiliently biased connection |
698.41 | | . . For rotary tool |
698.42 | | . . . Flexible sleevelike tool |
698.51 | | . . . Adjustable |
698.61 | | . . . . Rectilinearly |
698.71 | | . . For rectilinearly reciprocating tool |
698.91 | | . . . Tool is single element with continuous cutting edge (e.g., punch, etc.) |
699.11 | | . . . Tool is single element reciprocable generally perpendicularly to elongate cutting edge (e.g., shear, etc.) |
699.21 | | . . . Tool is single element reciprocable along elongate cutting edge (e.g., saw blade, etc.) |
699.31 | | . . . Adjustable |
699.41 | | . . . . Rectilinearly |
699.51 | | . . Adjustable |
699.61 | | . . . Rectilinearly |
856 | | . Stationary cutter |
857 | | . . Nonparallel cutting edges |
858 | | . . Parallel cutting edges |
859 | | MACHINE FRAME |
860 | | . Guard |
701 | | MISCELLANEOUS |
| | ****************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ****************************** |
901 | | APPAREL COLLAR MAKING |
902 | | ATTACHMENTS FOR OTHER TYPES OF MACHINE |
903 | | BATTERY GRID TRIMMING |
904 | | BOOK INDEX CUTTING |
905 | | BUTTONHOLE MAKING |
906 | | CHIP MAKING |
907 | | COILED WIRE CUTTING |
908 | | COMB, RAKE, OR OTHER TOOTHED ARTICLE MAKING |
909 | | CUTTING STRAND EXTENDING FROM OR LYING ON STRAND OR PACKAGE SUPPORT |
910 | | EMBROIDERY TRIMMING OR CUTTING |
911 | | ENVELOPE BLANK FORMING |
912 | | ENVELOPE OPENERS |
913 | | FILAMENT TO STAPLE FIBER CUTTING |
914 | | FLASH TRIMMING |
915 | | FUR CUTTING |
915.3 | | ICE CUTTING MACHINES |
915.5 | | MICROTOME |
916 | | NIBBLING |
917 | | NOTCHING |
918 | | PINKING |
919 | | SAMPLE TAKING |
920 | | SHINGLE MAKING |
921 | | SLIDE FASTENER CUTTING |
922 | | TACKY WEB CUTTING |
923 | | WASTE PRODUCT CUTTING |
924 | | WORK WRAPPED OR COATED AROUND A CORE (NOT PART OF THE MACHINE) |
927 | | PRINTER'S RULE CUTTING |
928 | | VEHICLE-MOUNTED TOOL |
929 | | PARTICULAR NATURE OF WORK OR PRODUCT |
929.1 | | . Printed circuit board |
929.2 | | . Electrical component lead trimming |
930 | | . Radioactive |
931 | | . Tobacco |
932 | | . Edible |
933 | | . Book, being destroyed; e.g., cover being cut away |
934 | | . Book, being made; e.g., trimming a signature |
935 | | . Endless band |
936 | | . Cloth or leather |
937 | | . . From continuous or wound supply |
938 | | . . Moving cloth or leather |
939 | | . . With work support |
940 | | . . . Cutter moves along bar, bar moves perpendicularly |
941 | | . . . . Work support comprising penetratable bed |
942 | | . Contact pin of electrical component |
943 | | . Pallet |
944 | | . Syringe needle |
945 | | . Separating connected articles |
946 | | . Container |
947 | | . Insulation about wire |
948 | | . Having "memory"; e.g., photographic or magnetic film |
949 | | . Continuous or wound supply |
950 | | . . Strandlike |
951 | | . Rubber tire |
952 | | . Moving work |
953 | | . With work support |
954 | | KNIFE CHANGING |
955 | | CUTTER EDGE SHIFTABLE TO PRESENT DIFFERENT PORTION OF EDGE |
956 | | ULTRASONIC |
| | ********************************* |
| | FOREIGN ART COLLECTIONS |
| | ********************************* |
| | Any foreign patents or non-patent literature from subclasses that have been reclassified have been transferred directly to FOR Collection listed below. These collections contain ONLY foreign patents or nonpatent literature. The parenthetical references in the Collection titles refer to the abolished subclasses from which these Collections were derived |
| | WITH MEANS TO CONVEY WORK RELATIVE TO TOOL STATION (83/401) |
| | . Cut made parallel to direction of and during work movement (83/425) |
FOR 100 | | . . By work moving carriage (83/435.1) |
| | WITH MEANS TO CONVEY WORK RELATIVE TO TOOL STATION (83/401) |
FOR 101 | | . By feed roller (83/436) |
FOR 102 | | . Rectilinear movement only (83/437) |
| | ****************************** |
| | DIGESTS |
| | ****************************** |
DIG 1 | | Safety devices |
DIG 2 | | I-shaped beam cutter |
DIG 3 | | Inflatable tube |