Subclass |
| Title |
ClassTitle
|
| ===>
TURNING
|
| | |
1.11 | | PROCESS OF TURNING |
1.12 | | TALKING MACHINE TABLET |
1.2 | | RADIALLY MOVING ROTATING TOOL INSIDE BORE |
1.3 | | . Forming non-circular bore |
1.4 | | . Tool simultaneously moving axially |
1.5 | | . . Pivoted to tool-carrier |
18 | | PATTERN SECTION |
19 | | . Cam-controlled cutter |
11 | | AXIAL PATTERN |
11.1 | | . Having transverse tool and templet guide |
11.2 | | . . With workpiece guage |
11.3 | | . . Having electrical actuator |
11.4 | | . . . And hydraulic actuator |
11.5 | | . . Having hydraulic actuator |
12 | | . Pivoted tool rest |
13 | | . Profiled cutter |
| | TAPERS |
15 | | . Offset work axis |
| | . Transversely shifted cutter |
17 | | . . Templet controlled |
16 | | . . Gear controlled |
46 | | SEVERING OR CUT-OFF |
47 | | . Processes |
48 | | . Automatic and/or triggered control |
49 | | . Combined with means to sharpen tool(s) |
50 | | . Combined with means to apply fluid |
51 | | . Combined with means to heat tool and/or work |
52 | | . With dust or chip handling |
53 | | . Including scrap cutting means |
53.1 | | . Flying cutter type |
54 | | . Cutting couple straddling work |
55 | | . . With pattern, guide or cam means (noncircular product) |
56 | | . . Plural cutting means (pairs, or pair, plus single) |
57 | | . . Rotary shear pair |
58 | | . . . Tool axes parallel to axis of work rotation |
59 | | . Interrelated means for tool infeed and circumrotation |
60 | | . . Dependent upon reaction to work |
61 | | . . Infeed cam disk rotation geared to tool holder rotation |
62 | | . . . Axial infeed cam |
63 | | . . . Including centrifugal balancing means |
64 | | . . . Scroll plate infeed cam |
65 | | . . Infeed cam plate braked with respect to tool(s) carrier plate |
66 | | . . Orbital cogwheel and fixed detent |
67 | | . . Common gear means |
68 | | . . . Including adjustable means to vary gear speed |
69 | | . . . With manual disconnect lever |
70 | | . . With means to feed work |
70.1 | | . Infeed means |
70.2 | | . . With means to circumrotate tool(s) about work |
71 | | . . . Fluid means for relative tool actuation |
72 | | . . . Gear means for tool actuation |
73 | | . . . . Including axial cam |
74 | | . . . . . With indicator |
75 | | . . . Bell crank linkage for tool(s) holder |
76 | | . . . Resilient means for tool actuation |
77 | | . . . . With means for manual retraction |
78 | | . . Hand crank for tool holder |
79 | | . . Power driven eccentric |
80 | | . . . Fluid motor |
81 | | . . . Plural tools |
82 | | . . Tool within work |
83 | | . . With means to rotate tool(s) |
84 | | . . . Including rotatable cutters supporting work |
85 | | . . . Planetating work mandrels |
86 | | . . . Pivoted tool carriage |
87 | | . . . . With adjustable work stops |
88 | | . . . Eccentric periphery rotary tool |
89 | | . . . Means to feed work axially |
90 | | . . . Translatable work support carriage |
91 | | . . . With tool groove in support roll(s) |
92 | | . . Rotatable tool(s) driven by contact with work |
93 | | . . . Axially movable tool support |
94 | | . . . . Freely floating parallel to axis |
95 | | . . . . . With supplemental nonrotative tool |
96 | | . . . . Including clutch control for work rotation |
97 | | . . . Including resilient means urging work against rotary support |
98 | | . . Separate means for plural tools |
99.1 | | . . Spring urged |
99.2 | | . . . For window shade |
100 | | . . Tool adjustment and/or stop |
101 | | . . With means to support and/or rotate work |
102 | | . . With means to feed work |
103 | | LATHE FOR PULLEY |
104 | | LATHE FOR WHEEL OR AXLE |
105 | | . In situ lathe for railroad wheel |
106 | | LATHE FOR CRANK OR CRANK PIN |
107 | | . Portable lathe for crank pin |
108 | | . Having work oscillator |
109 | | . . Having work driver |
110 | | LATHE FOR SCREW CUTTING |
111 | | . Having swinging feed nut and tool bar |
112 | | PORTABLE LATHE FOR BRAKE DRUM, DISC, OR SHOE |
113 | | PORTABLE LATHE FOR PIPE TURNING |
114 | | PORTABLE LATHE FOR PISTON GROOVING |
115 | | BENCH LATHE |
116 | | . Watchmaker's lathe |
117 | | LATHE |
118 | | . With program control |
119 | | . . And transmission |
120 | | . . And tool turret |
121 | | . With tool turret |
122 | | . Vertical |
123 | | . Having facing tool fed transverse to work |
124 | | . With work feeder or remover |
125 | | . . Magazine type |
126 | | . . . Bar feeder |
127 | | . . Bar feeder |
128 | | . Portable |
129 | | . Multiple |
130 | | . Having hollow cutter head |
131 | | . Revolvable cutter heads |
132 | | . Carriage feed |
133 | | . . Control |
134 | | . . . Electrical type |
135 | | . . Apron mechanism |
136 | | . . . Feednut control |
137 | | . . Slide rest |
138 | | . . . Multiple tool support |
139 | | . . . Tool relief |
140 | | . . Change gears |
141 | | . . Feedscrews and rods |
142 | | . Headstock |
143 | | . . Speed changing gear |
144 | | . . . Speed change gears for maintaining constant cutting speed |
145 | | . . Spindle reverser |
146 | | . . Spindle or work angler |
147 | | . . Spindle and bearings |
148 | | . Tailstock |
149 | | . Bed |
150 | | . Center |
151 | | . . Alignment adjuster |
152 | | . Attachment |
153 | | . . Stop (e.g., carriage, tool, work, etc.) |
154 | | . . . Tool slide |
155 | | . . . Collet or spindle |
156 | | . . . Indexible (e.g., roll type, etc.) |
157 | | . Tool and work rest |
158 | | . Tool rest |
159 | | . . Turret type holder (e.g., multiple tools, etc.) |
160 | | . . Quick release tool or holder clamp |
161 | | . . Tool post |
162 | | . Work rest |
163 | | . . With noise or vibration dampener |
164 | | . . Center rest |
165 | | WORK DRIVER |
166 | | . Lathe dog |
167 | | . . Cam grip |
168 | | . Mandrel |
169 | | . . Expansible |
170 | | CENTERER |
171 | | DRILL PRESS ATTACHMENT FOR TURNING |
172 | | ATTACHMENT FOR CUTTING A VALVE |
173 | | MISCELLANEOUS |
| | ***************************** |
| | CROSS-REFERENCE ART COLLECTIONS |
| | ***************************** |
900 | | LATHE THERMAL REGULATION |
901 | | CHIP REMOVAL |
902 | | OIL GROOVING DEVICE |
903 | | BALANCING AND CENTERING |
904 | | VIBRATING METHOD OR TOOL |
905 | | TRANSMISSION ACCESSORY OR CONTROL |