Subclass |
| Title |
ClassTitle
|
| ===>
STATIC STRUCTURES (E.G., BUILDINGS)
|
| | |
1 | | CONTROLLED BY CONDITION RESPONSIVE MEANS |
2.11 | | SHAPED OR STRENGTHENED BY FLUID PRESSURE |
2.12 | | . Loading dock doorway seal |
2.13 | | . Confined tubular element exerts force |
2.14 | | . . For sealing a closure panel |
2.15 | | . Form for hardenable material |
2.16 | | . Fluid pressure is subatmospheric |
2.17 | | . Including ingress/egress provision |
2.18 | | . Intersecting tubular elements form framework |
2.19 | | . Supported on rigid-walled structure |
2.21 | | . Upstanding column (e.g., mast, tower) |
2.22 | | . Comprising spaced, sheetlike members and fluid chamber therebetween |
2.23 | | . . Including subdividing elements |
2.24 | | . Sheetlike member comprising plural, edge-joined sections |
2.25 | | . Including hold down means |
2.26 | | . . Comprising strandlike element |
3 | | ARTICLE OR MATERIAL SUPPORTED COVER |
4 | | . With article or ground penetrating retainer |
5 | | . Flexibly connected strips or slats |
6 | | WITH STADIUM OR AUDITORIUM FEATURE |
7 | | . Movable stage |
8 | | . Seating arrangement |
9 | | . . Shiftable seating section |
10 | | . . . Power means |
11 | | COVER WITH SURFACE WATER RECEIVER AT EAVE OR VALLEY |
12 | | . With separator; e.g., strainer |
13 | | . Between oppositely sloping sections |
14 | | . . With additional subsurface liquid receiver |
15 | | . Inwardly of edge |
16 | | . With downspout |
17 | | INSULATED RAILWAY CAR-TYPE ROOF |
18 | | CLERESTORY OR SAW-TOOTH ROOF |
19 | | WITH ENTRANCE FOR PERSONS OR OBJECTS IN HORIZONTAL OR INCLINED COVER |
20 | | . With additional enclosure structure; e.g., manhole |
21 | | . Masonry or concrete |
22 | | SPECIFIED ROOF SPACED FROM CEILING |
23 | | COVER WITH EXTERIOR HOLDDOWN |
24 | | COVER WITH PROJECTING RESTRAINER; E.G., SNOW STOP |
25 | | . Rod-type with plural supports |
26 | | . Restrainer having integral penetrator |
27 | | INCLUDING COMPONENT (E.G., WALL) DESIGNED TO RECEIVE A DISPARATE ARTICLE HAVING DISPARATE ARTICLE MOUNTED THERETO |
27.5 | | . With a telephone (e.g., booth or stand) |
28 | | . Artificial illumination means |
29 | | . Mounted for movement |
30 | | . . Elevator in multistory |
31 | | . . Revolving or endless-type conveyor |
32 | | . . Swinging |
33 | | . Articles form traffic path arrangement |
34 | | . Lavatory fixture |
35 | | . . Wall juncture (e.g., bathtub surround kit) |
36.1 | | . Task-area type repositionable component (e.g., modular booth, workstation, or concession stand) |
36.2 | | . . With top covering |
36.3 | | . Fireplace mantel |
36.4 | | . Component having specific attachment for an article comprising a horizontal, planar surface (e.g., shelf, bed) |
36.5 | | . . Connecting feature for modular-type panels having article (e.g., cabinet, shelf bracket) attachment |
36.6 | | . . . Including a slotted tubular portion |
37 | | . On or adjacent portal frame; e.g., window cleaner`s hook |
38 | | . Sign; e.g., nameplate or ornament |
39 | | . Supported from ceiling |
40 | | . On shaft or tower |
41 | | ROOF RUNNING BOARD OR SADDLE |
42 | | . Shaped to accommodate seam |
43 | | . . Also ridge cap |
44 | | . Attached to seam |
45 | | RAILROAD CAR ROOF CONSTRUCTION |
46 | | . Continuous carline; e.g., discrete coextensive rafter |
47 | | . . And longitudinal ridge |
48 | | . . Purlin or cross-bracing |
49 | | . . Superjacent covering strip |
50 | | . . Laterally verging sections |
51 | | . . Separate end fastener or support |
52 | | . . Over juncture of covering sheets |
53 | | . Transverse sustaining rib integral with covering |
54 | | . Central discrete ridge member |
55 | | . . Relatively movable covering sections |
56 | | . Covering sheet with overhanging continuing edge section |
57 | | ROOF FINIAL OR CRESTING |
58 | | EXTERIOR-TYPE FLASHING |
59 | | . Raggle block |
60 | | . Interfitting parts |
61 | | . . Within wall |
62 | | . Extending into wall |
63 | | ENCLOSURE INCLUDING FLACCID NONMETALLIC OR FORAMINOUS SURFACING |
64 | | BARRIER OR MAJOR SECTION MOUNTED FOR IN SITU REPOSITIONING; E.G., REARRANGEABLE OR ROTATABLE |
65 | | . Rotatable about vertical axis |
66 | | . Roof movable as entity relative to its substructure |
67 | | . Telescoping sub and main enclosures |
68 | | . Wall extension convertible to roof |
69 | | . Hinged to swing from vertical to nonvertical |
70 | | . Three walls hinged at their intersections |
71 | | . Barrier of hingedly connected sections |
72 | | . Movable cupola or section thereof |
73 | | RIGID BARRIER CANTILEVERED FROM VERTICAL SUPPORT |
74 | | . Awning type |
75 | | . . Longitudinal axis of slats inclined |
76 | | . . . With side panel |
77 | | . . . . Diverse side and top panels |
78 | | . . Horizontal slatlike surfacing |
79.1 | | PREASSEMBLED SUBENCLOSURE OR SUBSTRUCTURE SECTION(S) OF UNIT OR BUILDING |
79.2 | | . Vertically staggered |
79.3 | | . Angularly stacked |
79.4 | | . Nonrectangular substructure |
79.5 | | . Collapsible for ease of transport |
79.6 | | . Porch or vestibule |
79.7 | | . Opening between subenclosures |
79.8 | | . . Portal to portal |
79.9 | | . With retaining or attaching means |
79.11 | | . . Cast in situ |
79.12 | | . . Separate frame |
79.13 | | . . Distinct vertical tie |
79.14 | | . Continuous cementitious barrier |
80.1 | | COMPOUND CURVE STRUCTURE |
80.2 | | . Hyperbolic parabloid shape |
81.1 | | . Geodesic shape |
81.2 | | . . Having an underlying grid frame |
81.3 | | . . . Frame connection detail |
81.4 | | . . Comprised entirely of a single self-supporting basic geometrical shaped panel |
81.5 | | . . . Trapezoidal or rectangular design |
81.6 | | . Monolithic construction |
82 | | CONICAL OR RADIALLY RIBBED COVER |
83 | | COVER OR ENCLOSURE SUSPENDED BY FLEXIBLE MEANS |
84 | | STREAMLINE CROSS-SECTION; I.E., AIRFOIL |
85 | | CURVILINEAR PORTAL WITH SETTABLE MATERIAL BACKER |
86 | | VERTICALLY CURVED ARCH WITH TERMINAL SUPPORT |
87 | | . With deck structure |
88 | | . Monolithic arch |
89 | | . Stonelike modules form arch |
90.1 | | INCLINED TOP COVER (E.G., ROOF, A-FRAME) |
90.2 | | . On existing roof |
91.1 | | . Self-supporting cover (i.e., without distinct rafters) |
91.2 | | . . Eave fixed by masonry or settable material |
91.3 | | . . Connection for abutting cover sections |
92.1 | | . Rafter tie-in at horizontal-type support (e.g., wall plate) |
92.2 | | . . Distinct connector fixing rafter to wall plate |
92.3 | | . . Rafter end terminating at wall exterior face |
93.1 | | . Rafter to vertical support (e.g., stud, column, post) connection |
93.2 | | . . Rafter overhangs vertical support outside surface |
94 | | GABLE OR EAVE TERMINAL CONSTRUCTION |
95 | | . With conduit or passage means (e.g., eave vent, insulation shield for eave vent) |
96 | | . Covering continuation overlaps edge |
97 | | EXTERNALLY PROJECTING LIQUID DEFLECTOR |
98 | | FRANGIBLE SECTION OR MEANS |
99 | | . In dissimilar material member |
100 | | . Removable corner or internal section |
101 | | ANIMAL BLOCKING LATERAL PROJECTION, TRAP, OR SCARER |
102 | | EARTH-SUPPORTED COPING OR EDGING |
103 | | LAND MARKER OR MONUMENT |
104 | | . With translucent feature |
105 | | WITH INDICIA |
106 | | JAIL-TYPE STRUCTURE |
107 | | AREAWAY; E.G., WINDOW WELL |
108 | | STRIPLIKE UNIT, REVERSIBLY FLEXIBLE AND RIGID |
109 | | LAZY TONG EXTENSION UNIT |
110 | | SHAFT, VEHICLE SHELL ATTACHED; E.G., ANTENNA |
111 | | MECHANISM OPERATED RELATIVELY MOVABLE SHAFT ASSEMBLY |
112 | | . Opposed barrier-engaging; e.g., rock drill column |
113 | | . With spring-actuated return |
114 | | . Moves about vertical axis |
115 | | . Fluid pressure actuated |
116 | | . Tilts relative to base |
117 | | . . Relatively moving sections |
118 | | . . . Telescoping |
119 | | . . . Lifting arm directly engages tower |
120 | | . . . Gin pole hoist |
121 | | . Longitudinally extensible by flexible drive or hoist |
122.1 | | WITH LIFTING OR HANDLING MEANS FOR PRIMARY COMPONENT OR ASSEMBLY |
123.1 | | . Mast or enclosure section elevated to superimposed position |
124.1 | | . Vault component |
124.2 | | . . Having hand, hoist, or tackle engaging means embedded in settable material |
125.1 | | . Lift slab |
125.2 | | . Construction or component having means to engage hand or cable-type lifting means |
125.3 | | . . Unitary engaging means in monolithic or single contruction or component |
125.4 | | . . Embedded in settable material |
125.5 | | . . . Embedded socket element |
125.6 | | . . Engaging means cooperates with rigid, intermediate device which distributes load or lifts multiple components |
126.1 | | . Position adjusting means; e.g., leveling |
126.2 | | . . For service duct or outlet |
126.3 | | . . For vertical barrier only |
126.4 | | . . . Threaded element engages support surface |
126.5 | | . . For horizontal barrier only |
126.6 | | . . . Adjustable pedestal |
126.7 | | . . Threaded element engages support surface |
127.1 | | WITH ADJUNCTIVE MEANS FOR ASSEMBLY OR DISASSEMBLY |
127.2 | | . Removable prop or brace combined with structure component |
127.3 | | . Having component positioning means or control means for flowable material |
127.4 | | . . Opening or passageway for flowable material |
127.5 | | . Specific hand or tool engaging surface on structure component |
127.6 | | . . Panel and frame connection |
127.7 | | . Structure includes tool or opening to provide access for a tool used in operating a locking, latching, attaching, or adjusting means |
127.8 | | . . Panel joined to or released from peripheral frame |
127.9 | | . . Tool operates swinging arm latch |
127.11 | | . . Cam surface |
127.12 | | . . Threaded engagement means |
128 | | BURIAL VAULT |
129 | | . With corpse, or corpse product, treating feature |
130 | | . . Disinfectant means |
131 | | . With fluid guiding port from ambient |
132 | | . . With internal air director |
133 | | . Combined |
134 | | . Mausoleum type |
135 | | . Concentric barrier sections with dissimilar sealing lamina therebetween |
136 | | . Compartmented |
137 | | . . Plural covers defining a compartment therebetween |
138 | | . Hood type |
139 | | . With separately placeable closure in abutting relation to wall edges |
140 | | . . With sealing material retaining construction |
141 | | . . . Tongue and groove type |
142 | | . . Sectional side walls and floor construction |
143 | | WITH TRANSPORTING FEATURE |
144 | | WITH EXPOSED CONFIGURATION HAVING ACOUSTICAL FUNCTION |
145 | | . Absorbing material behind foraminous facing sheet |
146 | | VERTICAL STRUCTURE WITH BRACE, OR GUY, EXTENDING DIAGONALLY TO A BASE |
147 | | . Attached discrete guard |
148 | | . Flexible guy type |
149 | | . With adjustable means |
150 | | . . At brace and shaft intersection |
151 | | . . For tie between shaft and brace |
152 | | . Spaced or angularly related braces |
153 | | SHAFT WITH EMBEDDING WING-TYPE BRACE |
154 | | . Wings in different planes |
155 | | PIERCING OR EXPANDING EARTH ANCHOR |
156 | | . Disparate subterranean anchor components |
157 | | . Auger-type penetrator |
158 | | . Laterally held, translating driven piercer |
159 | | . Guided in plane normal to shaft |
160 | | . Spreader cam or plate |
161 | | . . Screw operated |
162 | | . Pivot means connecting separate fluke or hook |
163 | | . . Fluke or hook pivoted intermediate their ends |
164 | | . . Connected by pivoted brace or tie |
165 | | . Supporting separate axially aligned shaft |
166 | | DEADMAN-TYPE ANCHOR |
167.1 | | MEANS COMPENSATING EARTH-TRANSMITTED FORCE (E.G., EARTHQUAKE) |
167.2 | | . Dynamic force generator |
167.3 | | . Cross bracing |
167.4 | | . Relative motion means between a structure and its foundation |
167.5 | | . . Rolling support |
167.6 | | . . . With damping or limiting means |
167.7 | | . . Elastomeric support |
167.8 | | . . . With damping or limiting means |
167.9 | | . . Polymeric support structure (e.g., Teflon@) |
168 | | WITH PROTECTIVE LIQUID SUPPLY |
169.1 | | SPECIFIED TERRANEAN RELATIONSHIP |
169.2 | | . Geographic |
169.3 | | . . Divided terrane |
169.4 | | . Inclined terrane |
169.5 | | . With drain or vent exterior to foundation perimeter |
169.6 | | . Subterranean enclosure with portal opening; e.g., storm or root cellar, bomb shelter |
169.7 | | . Open top, embedded container, tank, or reservoir |
169.8 | | . . With laterally spaced foundation element |
169.9 | | . Discrete, spaced foundation elements (e.g., post, column) |
169.11 | | . Means to control heat transfer; e.g., insulation or frostline positioning |
169.12 | | . Mobile home skirt |
169.13 | | . Shaft; i.e., elongated rigid structure |
169.14 | | . With waterproofing means; e.g., covering, coating, or lamina |
170 | | . Shaft reinforcement adjacent earth's surface |
171.1 | | VIEWING PORT FOR SPECIFIC ENVIRONMENT |
171.2 | | VEHICLE-TYPE WINDSHIELD DEFOGGER OR DEICER |
171.3 | | TRANSPARENT PANEL HAVING ACTIVE TREATMENT WITH GAS OR LIQUID |
172 | | . Hygroscopic material; e.g., internal drier |
173.1 | | COMBINED |
173.2 | | . With a loading dock seal |
173.3 | | . With a sunlight activated device (e.g., passive solar or photoelectric) |
174 | | WITH TRAFFIC-GUIDING FEATURE |
175 | | . Multilevel building with ramp |
176 | | . . Central ramp group |
177 | | SPECIFIED WEAR OR FRICTION-TYPE TRAFFIC-CARRYING SURFACE |
179 | | . Tread-nosing; e.g., shaped stair pad |
180 | | . Perforate structure having twisted element or particular surface |
181 | | . Exposed embedded element or inserted filler |
182 | | STEPPED; E.G., STAIR |
183 | | . Interconnected relatively movable components |
184 | | . With additional building feature |
185 | | . . Multilevel building |
186 | | . . Closure |
187 | | . Helical type |
188 | | . Tread unit on horizontal tread member connected to riser |
189 | | . Precast stonelike component |
190 | | . . Integral tread and riser |
191 | | . Risers connected to common stringer |
192 | | FLUENT MATERIAL HOPPER OR STORAGE CONTAINER WITH MATERIAL PORT |
193 | | . Rod crossing port |
194 | | . Elevated container, leg-supported |
195 | | . With chute |
196 | | . Framed port in wall |
197 | | . Bottom outlet port; e.g., hopper bottom |
198 | | ENCLOSURE OR COVER, WITH SUPPLEMENTAL FLUID-GUIDING PORT BETWEEN AMBIENT AND ENCLOSED USABLE SPACE (E.G., ROOF RIDGE VENT) |
199 | | . Attic vent |
200 | | CUPOLA OR SKYLIGHT |
201 | | BAY WINDOW |
202 | | AUXILIARY IMPERFORATE PANEL-LIKE SHIELD ATTACHED TO MAIN PANEL, BARRIER, OR FRAME |
203 | | . Auxiliary pane attached to main pane |
204.1 | | FRAMING TO RECEIVE DOOR, DOORJAMB, OR WINDOW SASH |
204.2 | | . Lintel |
205 | | . Access portal in interior partition; e.g., into office or storage space |
206 | | . Wall with plural portals |
207 | | . With one movable door section and at least one fixed section (e.g., sliding doors) |
210 | | . Specific studding arrangement for door, doorjamb, or window sash |
211 | | . Architrave; i.e., finish strip on floor, ceiling, or wall opening |
212 | | . . Separable and lapped sections |
213 | | . Retaining feature between frame and reveal |
215 | | . . Buck |
216 | | . . Foraminous section of frame embedded |
217 | | . . For size-adjustment |
204.5 | | WINDOW OR WINDOW SASH, SILL, MULLION, OR GLAZING |
204.51 | | . Having a fixed pane and a movable pane |
208 | | . Panel or panel edging, directly clamped or adhered to wall |
209 | | . Having a drain or vent |
204.52 | | . . With a plug |
204.53 | | . Architrave; i.e., molding or finish strip touching pane face |
204.54 | | . . Separable and lapped sections |
204.55 | | . Sash having integral securing means (e.g., nailing strip) |
214 | | . . Catch or resilient strip |
204.56 | | . . For size adjustment |
204.57 | | . Intersection of panes having coextensive exposed sustainer (i.e., corner) |
204.58 | | . Finite tie for intersection of panes (i.e., corner) |
204.59 | | . Ornamental type; e.g., stained glass or mosaic type |
204.591 | | . Spacing pane from disparate edging |
204.593 | | . . At least two spaced panes |
204.595 | | . . . Spaced by unitary or contacting U-channels |
204.597 | | . . Overlapping edge and face of pane |
204.599 | | . . Metallic spring (e.g., strip separator) |
204.6 | | . Multiple panes within a sash |
204.61 | | . Decorative grill attached to sash |
204.62 | | . Attaching means securing a pane to a sash member or to another pane |
204.63 | | . . Sash piercing element (e.g., glazing points) |
204.64 | | . . Including cam or wedge |
204.65 | | . . . Clamped against pane by turning cam engaging screw |
204.66 | | . . Pivots or includes pivoting actuating means |
204.67 | | . . Contacting pane front and back then fastens to sash |
204.68 | | . . . Interconnected by intermediate member and fastener |
204.69 | | . . Pane to sash attaching means resiliently biased |
204.7 | | . . With attaching means element received in channel or aperture in sash |
204.705 | | . . Solid three-sided glazing strip |
204.71 | | . U-shaped channel formed of separate strips overlapping pane edge, front, and back |
204.72 | | . . With mechanical fastener for securing strips |
218 | | FLUE WITH GASEOUS FLUID-DIRECTING FEATURE |
219 | | FLUE CONNECTION TO BUILDING STRUCTURE |
220.1 | | WALL, CEILING, OR FLOOR DESIGNED FOR UTILITIES |
220.2 | | . Load-bearing, prefabricated, abutting units with aligned utility passages |
220.3 | | . Multiple passageway or multicellular load-bearing units (e.g., grid or two parallel pipes in a slab) |
220.4 | | . . Corrugated type |
220.5 | | . Completed accessible continous trench duct type |
220.6 | | . Suspended ceiling |
220.7 | | . Partition type (e.g., raceway arrangement) |
220.8 | | . Having a passageway through the entire wall, ceiling, or floor thickness (e.g., poke-through) |
222 | | TENSIONED OR FLEXED SHEET FACING |
223.1 | | WITH COMPONENT HAVING DISCRETE PRESTRESSING MEANS |
223.2 | | . Pressure vessel |
223.3 | | . Tubular shaped tank, silo, cooling tower, etc. |
223.4 | | . Axially loaded vertical structure (e.g., column, derrick) |
223.5 | | . . Composed of stacked sections |
223.6 | | . Slab or panel construction |
223.7 | | . . Composed of abutting modular panels or blocks |
223.8 | | . Beam, girder, or truss construction |
223.9 | | . . Composed of abutting sections |
223.11 | | . . Connecting adjacent ends of monolithic beam or girder |
223.12 | | . . Homogenous design (e.g., all metal) |
223.13 | | . Anchorage (e.g., end) |
223.14 | | . Specific prestressing means |
231 | | MONOLITH WITH SUSTAINER AND MEANS TENSIONING ADDITIONAL REINFORCEMENT |
232 | | IRREVERSIBLY REACTIVE COMPONENT |
233 | | LOG WALL-TYPE CONSTRUCTION |
234 | | MULTIROOM OR LEVEL |
235 | | . Curtain-wall; i.e., panel attached outside floor or beam |
236.1 | | . Nonrectangular |
236.2 | | . . Curvilinear |
236.3 | | . Multilevel |
236.4 | | . . Staggered levels |
236.5 | | . . Continuous cementitious barrier |
236.6 | | . . Floor intermediate wall ends |
236.7 | | . . Superimposed vertical structure with spacing horizontal structure |
236.8 | | . . . Horizontal structure includes component of settable material |
236.9 | | . . Abutting vertical structure at horizontal structure juncture |
238.1 | | . Partition secured to and crossed by preconstructed barrier |
239 | | . . Cubicle type; i.e., spaced from floor or ceiling |
240 | | . . With tensioning means |
241 | | . . Elongated terminal member |
242 | | . . . Interfitted trim plate |
243 | | . . Spaced sustainers individually connected to barriers |
243.1 | | . . Movable element on partition engages overhead barrier; i.e., ceiling, to secure partition in place |
244 | | TUBULAR STRUCTURE WITH EXPOSED TERMINUS EDGE PROTECTOR |
245 | | CURVILINEAR BARRIER |
246 | | . Supports transverse structure |
247 | | . Anchored to disparate base |
248 | | . Dissimilar material hoop tie |
249 | | . Transversely layered |
250 | | INTERSECTION OF A CAST STONELIKE COMPONENT (E.G., CONCRETE FLOOR OR WALL) TO ANOTHER COMPONENT (E.G., WALL) |
251 | | . Cast reinforced vertical and horizontal members |
252 | | . . Distinct horizontal sustainers between columns |
253 | | . . Rods engage rings or plates at supports |
258 | | . Laterally related modules with concealed cast-sustainer |
259 | | . Cast in situ material at module juncture |
260 | | . Cast in situ column with radiating-type reinforcement |
261 | | THREE-WAY CORNER CONSTRUCTION (E.G., TWO WALLS AND A FLOOR) |
262 | | . Barrier resting on top of vertical structures; e.g., walls |
263 | | . . On column (e.g., elevated floor) |
264 | | . Floor supports walls |
265 | | . . Layered barrier |
266 | | . Vertically superposed wall sections |
267 | | . Wall of contacting layers |
268 | | . . Disparate material lamina between layers |
269 | | . . Dissimilar material sheet-form facing |
270 | | . Walls of modular construction |
271 | | . . Joint key between superimposed modules |
272 | | INTERSECTION OF WALL TO FLOOR, CEILING, ROOF, OR ANOTHER WALL (I.E., TWO-WAY CORNER CONSTRUCTION) |
273 | | . Flexible barrier covering: shaped or edge-attached |
274 | | . With footing; e.g., foundation |
275 | | . Laterally related modules; e.g., spaced surfacing forms corner |
276 | | . . Multiplane overlapping angle and barrier sections |
277 | | . . . Arcuate angle section |
278 | | . . . Means attaching angle section to substructure |
279 | | . . Abutting inner modules with outer L-type module |
280 | | . Trihedral shafts-type corner |
281 | | . Sustainer coextensive with junction of panels or modules |
282.1 | | . . Exposed sustainer |
282.2 | | . . . With three or more identical panel or module connection points |
282.3 | | . . . Wall, ceiling, or floor section designed to receive corner connector |
282.4 | | . . . With fastener |
282.5 | | . . . . Compressing a clamping means |
283 | | . Barrier or module seated on projecting means on vertical structure |
284 | | . Block type or modular panel type |
285.1 | | . . Finite (i.e., not coextensive), disparate material tie |
285.2 | | . . . Including threaded tie member |
285.3 | | . . . Clip-type tie |
285.4 | | . . . Lockpin-type tie |
286 | | . . Block type having vertical and horizontal keys |
254 | | . With revealed embedded protector |
255 | | . . Cast in situ facings (e.g., corner bead) |
256 | | . . . With separate anchor portions |
257 | | . . . Longitudinally spaced discrete anchor portions |
287.1 | | CONDUIT, TRIM, OR SHIELD MEMBER AT CORNER |
288.1 | | . With mechanical fastener |
289 | | COPLANAR SUSTAINERS; E.G., JOIST TO WALL (see 52/702) |
290 | | OPPOSED STRIP SECTIONS (BASEBOARDS) AND OUTWARDLY EXTENDING SUSTAINER |
291 | | ADJUSTABLE STRESSING MEANS; E.G., WARP CORRECTION |
292 | | FOOTING OR FOUNDATION TYPE |
293.1 | | . For a wall |
293.2 | | . . Of block (e.g., masonry) type |
293.3 | | . . With wall-securing means between wall bottom and footing (e.g., sill or sill plate) |
294 | | . Concrete type |
295 | | . . Embedded projecting tie |
296 | | . . Supporting shaft |
297 | | . . . Shaft encompassed by base |
298 | | . Socket |
299 | | . Framework spans footings |
300 | | VERTICAL STRUCTURE WITH UPPER TERMINAL BEARING PLATE OR CAP |
301 | | . Shaft |
302.1 | | WALL, CEILING, FLOOR, OR ROOF DESIGNED FOR VENTILATION OR DRAINAGE |
302.2 | | . For a grain bin |
302.3 | | . With the vent or drain entirely along at least one substantial dimension (e.g., length, not thickness) |
302.4 | | . . Composed of interfitting blocks |
302.5 | | . For a pole or post |
302.6 | | . Embedded flashing |
302.7 | | . Including a plug for drain or vent |
306 | | VISIBLE TRANSLUCENT BLOCK OR EMBEDDED COMPONENT |
307 | | . With preform of nontranslucent material |
308 | | . . Forming edging for translucent panel |
309.1 | | WITH SYNTHETIC RESINOUS COMPONENT |
309.2 | | . Locally reinforced to receive a fastener |
309.3 | | . Nonfoam adhesive |
309.4 | | . Foam |
309.5 | | . . Adhesive |
309.6 | | . . Open cell |
309.7 | | . . With an embedded, elongated component |
309.8 | | . . Adjacent nonporous layer |
309.9 | | . . . Nonporous exterior faces |
309.11 | | . . . . Tie between exterior faces |
309.12 | | . . . Cementitious material |
309.13 | | . With nonresinous component |
309.14 | | . . Exterior faces |
309.15 | | . . Core |
309.16 | | . . Embedded, elongated component |
309.17 | | . . Cementitious material |
310 | | MEANS REMOVING EXCESS MOISTURE FROM CAST IN SITU MASS |
311.1 | | ORNAMENTAL: COLOR, THICKNESS VARIATION, OR DISSIMILAR ELEMENTS FORMING PATTERN |
311.2 | | . Elements interfit or abut to create design |
311.3 | | . Decorative feature on a grille-type support |
312 | | . Trim strip with filler strip |
313 | | . Wood grain pattern arrangement |
314 | | . Facer formed to simulate multiple units |
315 | | . Visible discrete elements in cast material |
316 | | . Integral relief of face |
317 | | DRAFT STOP BETWEEN STUDS; E.G., FIRE STOP |
318 | | MONOLITHIC BARRIER WITH REVEALED INTERSECTING STIFFENERS; E.G., TERRAZO |
319 | | CAST IN SITU CONCRETE BARRIER WITH LATERALLY PROJECTING RIB-TYPE SUSTAINER |
320 | | . Block-type filler between sustainers |
321 | | . . Transverse retainer-engaging sustainers |
322 | | . . Preformed, settable material sustainer |
323 | | . . Filler of cooperating, void-forming sections |
324 | | . . With means underlying sustainer |
325 | | . . Hollow, nonrectangular filler |
326 | | . Means suspending backer or stiffener from sustainer |
327 | | . Additional distinct coextensive section fixed to barrier or sustainer |
328 | | . . Section on face of barrier opposite sustainer |
329 | | . . Arched backer between sustainers |
330 | | . . . With flange web-type reinforcement |
331 | | . . Distinct means between base of sustainer and section |
332 | | . . Discrete panels forming section |
333 | | . . Sustainer anchored within section |
334 | | . Shear-resisting means between sustainer and barrier |
335 | | . Sheet-form backer supported on upper terminal of sustainer |
336 | | . . Ridges on corrugated backing crossing sustainer |
337 | | . Intersecting sustainers of barrier material; e.g., lattice type |
338 | | . With backer supported on internal surface of flange web-type sustainer |
339 | | . . Arched backer |
340 | | . Sustainer enclosed by embedding material |
341 | | . . Reinforcement modified at sustainer crossing |
342 | | OPENLY SPACED SLAT-TYPE LATH |
343 | | . Woven or filament connected |
344 | | SETTABLE MATERIAL RECEIVING BACKER FIXED TO FURRING, JOIST, OR STUD |
345 | | . With adjustable spacer |
346 | | . Means accommodating movement of backer |
347 | | . With isolating means on supported side of backer |
348 | | . Intersecting or crossing members forming backer frame |
349 | | . . Terminal engaging flange or flanged member |
350 | | . . Member supported by flange of crossing member |
351 | | . With tie anchored in load-bearing barrier |
352 | | . Integral backer and elongated support |
353 | | . With tie crossing laterally related backers |
354 | | . Integral part of support between edges of coplanar backers |
355 | | . . With discrete separable fastener for backer |
356 | | . Support structurally modified to retain backer |
357 | | . Discrete clip engaging back of support and in front of backer |
358 | | . . Elongated wire-type clip |
359 | | . . Engaging flange, adjacent backer, of flange web-type support |
360 | | . . . Single clip engaging oppositely extending flanges |
361 | | . Impaling-type fastener |
362 | | . . Support penetrated |
363 | | . . . Backer penetrated |
364 | | INSTALLED SCREED OR UNIT WITH SPECIFIED FEATURE RETAINING PENETRATING FASTENER |
365 | | . Position adjusting means |
366 | | . Adhesively secured |
367 | | . Stonelike material base type; e.g., concrete set |
368 | | . . Composite shaft: pierceable component |
369 | | . . Integral means on holder penetrates ground member |
370 | | . . Holder engages opposite sides of ground member |
371 | | . . Screed of striplike material |
372 | | . . Locked together base and receiver |
373 | | . . . Shell with fastener-retaining feature |
374 | | . . . . Filler |
375 | | . . . Base is preformed module or panel |
376 | | . Composite, including pierceable nonmetal component |
377 | | . Fastener deflecting |
378 | | CAST IN SITU LOADING BEARING MONOLITH WITH COEXTENSIVE SECTION AND TIE |
379 | | . Tie between block-type units |
380 | | CAST IN SITU BARRIER CONSTRUCTION DEFINING ISOLATED SPACE |
381 | | . Lined cavity formed within monolithic barrier material |
382 | | . . Closed curvilinear cavity liner |
383 | | . Spaced barrier sections with dissimilar material tie |
384 | | VENEER TILES HELD BY NONLOAD-BEARING GRID |
385 | | . Attached to additional substructure |
386 | | . Integral projections on backer |
387 | | . . Engaging edges of tile |
388 | | . Mesh-type backer; e.g., woven fabric |
389 | | . Tiles embedded in settable material |
390 | | ADHERED COPLANAR VENEER TILE-TYPE FACER; E.G., PARQUET |
391 | | . With additional discrete securing means |
392 | | . Integral edge engaging spacing feature on tile |
393 | | RELATIVELY YIELDABLE PREFORMED SEPARATOR (I.E., EXPANSION JOINT) |
394 | | . Between overlapping edges of surfacing sections |
395 | | . Separating bridger strip from juncture of panels |
396.01 | | . Fire or heat resistive type (e.g., for furnace wall) |
396.02 | | . Separator inserted prior to or during pouring of two adjacent concrete sections |
396.03 | | . . Including a collapsible cell (e.g., hollow), bight, or accordion-shaped portion |
396.04 | | . Exposed separator between (1) set or cured concrete, (2) metal, wood, plastic, etc., or (3) prefabricated components |
396.05 | | . . With embedded anchor means |
396.06 | | . . Composed of at least one collapsible cell (e.g., hollow) |
396.07 | | . . Having a bight portion |
396.08 | | . . Between (1) brick or block courses, or (2) individual adjacent bricks or blocks |
396.09 | | . . . Bricks or blocks designed to receive separator |
396.1 | | . . Between tile-type components |
402 | | . Held by separate spacer |
403.1 | | UNDERLYING COMPRESSIBLE LAYER OR PAD (E.G., FLOOR SYSTEMS) |
404.1 | | INSULATING INSERT; E.G., FILLER IN CAVITY IN PRECONSTRUCTED OR CAST STRUCTURE |
405.1 | | . Stonelike type (e.g., concrete, masonry) shell |
405.2 | | . . Shell having end interfitting means |
405.3 | | . . Having reinforcement in shell or insert |
405.4 | | . . Insert having aligning feature |
406.1 | | . Enveloped-type filler |
406.2 | | . . Self-contained insulating unit |
406.3 | | . . Insert containing chamber |
407.1 | | . Filler spaced from inside face of cavity |
407.2 | | . . Filler suspended by supporting means surrounding at least four sides thereof |
407.3 | | . . Filler pieces within barrier frame (e.g., rafter, joist) |
407.4 | | . . Means (e.g., fastener) to position insulation via supporting means for the barrier |
407.5 | | . . Insulation defines air enclosing cell or compartment |
404.2 | | . With retaining means penetrating insulating layer |
404.3 | | . With divider between and holding insulating layer |
404.4 | | . Composed of modules having complementary abutting edges |
404.5 | | . Insulation suspended from discrete member (e.g., rod) within cavity |
408 | | DISPARATE SHEET LAMINA BETWEEN EXPOSED SURFACES OF WALL, FLOOR, OR ROOF (E.G., VAPOR BARRIER, WATERPROOFING MEMBRANE) |
409 | | . Lapped multiplanar components |
410 | | . Tie crossing dividing lamina |
411 | | . Additional material forming bond |
412 | | . . Extending into intersecting joints |
413 | | . . Integral projections on planar face |
414 | | CAST IN SITU COMPOSITE SLAB (E.G., STEEL-CONCRETE) |
415 | | FACERS; E.G., MODULES, MUTUALLY BONDED BY INTERNAL SETTABLE MATERIAL SECTION |
416 | | . Lapped or bridger strip juncture-type surfacing |
417 | | . . Dissimilar strip at juncture of facers |
418 | | . . Embedded fastener |
419 | | . . Material between superposed facers |
420 | | . . . Partial section; e.g., adhesive edge strip |
421 | | . Hollow module and discrete dam for cast section |
422 | | . Retaining feature on module exterior |
423 | | . Shaft with dissimilar shell |
424 | | . Laterally related modules; e.g., back-to-back |
425 | | . . Continuous section filling space between modules |
426 | | . . . With transverse tie |
427 | | . . Transverse, disparate material form member |
428 | | . . Separable, bonded tie between modules |
429 | | . . Flanges on modules enclosing section |
430 | | . . Integral overlapping bonded projections |
431 | | . . Module reinforcement anchored in section |
432 | | . Facer reinforcement anchored in section |
433 | | . Beam or girder type with feature resisting transverse loading |
434 | | . Modules fixed to preformed sustainer |
435 | | . . Flange web-type sustainer embedded in section |
436 | | . Section between integral interfitting means on modules |
437 | | . Section filling opposed channels in adjacent modules |
438 | | . . Dissimilar material member in section |
439 | | . Section filling hollow or channel module |
440 | | . Means covering section surface |
441 | | . . Distinct means separate from module |
442 | | . Dissimilar material member in section |
443 | | WITH MEANS (E.G., APERTURES, PROJECTIONS) FOR RECEIVING SETTABLE MATERIAL FACING (E.G., PLASTER) |
444 | | . Block-type backer with integral facing receiving feature |
445 | | . Discrete particles adhered to backer |
446 | | . Disparate coating material on backer |
447 | | . Separate sections with connecting feature |
448 | | . . Interengaging edge joint |
449 | | . Cementitious material covered by adhered apertured sheet |
450 | | . Corrugated |
451 | | . . Laminated on planar sheet |
452 | | . . With transverse filament |
453 | | . Grooved backer |
454 | | . Attached filament or mesh |
455 | | SECTIONED IMPERFORATE FACING WITHIN PERPHERAL FRAME; E.G., PLURAL PANEL DOOR |
456 | | . Intersecting separators within frame |
457 | | . Edge-abutted panels |
458 | | . . Panel edge flanges connected |
459 | | BRIDGER STRIP HIDING JUNCTURE OF PANELS |
460 | | . Panels attached to substructure arrangement |
461 | | . Bridger strip and coextensive elongated member at juncture |
462 | | . . Lapped panel sections |
463 | | . . With separable fastening element |
464 | | . . . Portion of bridger strip between panels |
465 | | . Cap |
466 | | . . With separate anchor element |
467 | | . . . Traversing cap |
468 | | . . Extending between spaced coplanar edges of panels |
469 | | . . Completely exterior |
470 | | . Interfitted with surfacing section |
471 | | . . In recess of section |
472 | | . . . Deformed section |
473 | | LOUVERED PANEL |
474 | | FACER HELD BY STIFFENER-TYPE FRAME |
475.1 | | . Self-supporting section (e.g., facing) attached to nonload bearing framing |
476 | | . . With releasable frame section retaining facer |
477 | | . . Stonelike load bearing-type component |
478 | | . Lapped multiplanar surfacing attached to substructure arrangement |
479 | | . Back-to-back facers spaced by concealed framing |
480 | | . . With spacing sleeper or subflooring |
481.1 | | . . With vertical support (e.g., stud) between facers |
481.2 | | . . . Demountable type (e.g., partition) |
482 | | . Frame with ductile-type deformable grip |
483.1 | | . Facer back abuts and conceals frame |
489.1 | | . . Including clip-type fastener |
489.2 | | . . . Having a prong-type portion |
762 | | . Facer between exposed frame members having unitary flanges or integral retainer for attachment to frame |
763 | | . Interkeyed edge configurations of adjacent facers cooperate with shaft |
764 | | . Facer attached between exposed frame members |
765 | | . . Attaching device with piercing means |
766 | | . . Attaching means includes cam or wedge |
767 | | . . . Clamped against section by turning cam engaging screw |
768 | | . . Attaching means pivots or includes pivoting actuating means |
769 | | . . Attaching means held in position by a spring-type member |
770 | | . . Attaching means contacts facer front and back faces then fastened to frame |
771 | | . . . Interconnected by intermediate member and fastener |
772 | | . . Exposed attaching element holds two spaced facers to frame |
773 | | . . Facer to frame attaching means resiliently biased |
774 | | . . . Attaching means in joint between adjacent facers |
775 | | . . Attaching element received in channel or aperture in frame |
777 | | . . Facer aligned to frame in two planes (e.g., notched facer) |
778 | | . . . Facer rabbeted to receive frame |
779 | | . . . Facer grooved to receive frame |
780 | | . . Frame recessed to receive facer |
781 | | . . Frame member fabricated from thin walled material |
781.3 | | . Additional stiffener between facer and frame |
781.5 | | . Preformed concrete frame |
761 | | . Frame member substantially cylindrical in cross-section |
503 | | HOLLOW BLOCKS ARRANGED TO FORM PASSAGEWAY |
504 | | . Facing of solid block-type modules |
505 | | . Horizontal and vertical communication |
506.01 | | SHEETLIKE ELEMENT ASSEMBLED PARALLEL TO EXISTING WALL, CEILING, OR FLOOR (E.G., INSULATING PANEL, SHEATHING) |
506.02 | | . For furnace or refrigeration |
506.03 | | . . Mounted on frame |
506.04 | | . . . Double wall, ceiling, or floor |
506.05 | | . Assembled with fastening device |
506.06 | | . Element spaced from wall, ceiling, or floor and held by discrete retaining means (e.g., suspended ceiling or wall) |
506.07 | | . . Inverted T-bar type |
506.08 | | . . Section designed (e.g., groove, integral hanger) to fasten to retaining means |
506.09 | | . . . Having abutting edges to conceal retaining means |
506.1 | | . . . . Edges interfit |
507 | | . Grille panel facer |
508 | | . Facially opposed barrier sections form cavity |
509 | | . With separate fastener extending beyond margin |
510 | | . Integral rear-seating ledge on facer |
511 | | . Mounting means attached to facer; e.g., upholstery panel |
512 | | . Separate fastener held by penetrating fastener |
513 | | . Discrete dissimilar tie between stonelike components |
514 | | WITH MEANS FOR SPLIT-PREVENTION OR DAMAGED PART REPAIR |
514.5 | | . Using settable material (e.g., grout) |
515 | | WITH DISPARATE PROTECTIVE COATING |
516 | | . In situ applied layer coextensive with lapped sections |
517 | | . Repellant treated |
518 | | LAPPED MULTIPLANAR SURFACING; E.G., SHINGLE TYPE |
519 | | . Interfitted sections |
520 | | . . Fastener or anchor at juncture |
521 | | . . . Traversing surfacing |
522 | | . . Resilient detent |
523 | | . . Edge and slit |
524 | | . . . Interfitting slits |
525 | | . . . With tab |
526 | | . . Tab and aperture |
527 | | . . Coplanar tab on margin |
528 | | . . Folded, rolled, or indented in situ |
529 | | . . Reentrant |
530 | | . . . Plural oppositely opening |
531 | | . . . . With terminal flange extending beyond joint |
532 | | . . . At corner of section |
533 | | . . Joint with fluid-handling feature |
534 | | . . . Formed by deformation of base material |
535 | | . . Plural offset portions |
536 | | . . Face-to-face tongue and groove; e.g., dado |
537 | | . . . Meshing corrugated sheet type |
538 | | . . . Plural opposed flanges |
539 | | . . Tongue and groove |
540 | | . . With laminated lap section |
541 | | . . Rabbet |
542 | | . . Perpendicularly directed flange |
543 | | . With fastener or anchor |
544 | | . . Interengaging connectable fastener parts |
545 | | . . Engaging folded section of strip or facing |
546 | | . . Fitted within edge slot or notch |
547 | | . . Edge-embracing |
548 | | . . . With integral piercing point |
549 | | . . Facing clamped to substructure by discrete external member |
550 | | . . Embracing or interfitted with substructure |
551 | | . . Subjacent fastener strip |
552 | | . . Secured to or integral with cover section |
553 | | . With spacing or space-forming feature |
554 | | . With pattern-forming feature |
555 | | . . Facing simulating plural elements |
556 | | . Metal face end covering |
557 | | . Plural tabs or facing elements simulator |
558 | | . . Formed embossment or groove |
559 | | . . Formed by slot |
560 | | . Tapered |
561 | | LATERALLY RELATED, INDIVIDUALLY ASSEMBLED COURSES |
562 | | . Utilizing discrete dissimilar material tie |
563 | | . . Engaging lateral integral projection on module |
564 | | . . Engaging opposed deformations in course modules |
565 | | . . Embedded in course module |
566 | | . Header unit traverses course |
567 | | . . Internal lock-head on header unit |
568 | | . Connected by transverse hidden joining member |
569 | | . Opposed lateral monolithic projections on modules |
570 | | . . Locking type; i.e., against lateral separation |
571 | | . . . Additional lock means between projections |
572 | | . . Opposed projections abutting |
573.1 | | INCLUDING DESIGN FEATURE (E.G., INTEGRAL CORRUGATION, TENSIONERS) ACCOMMODATING DIMENSIONAL VARIATION RESPONSIVE TO CHANGING CONDITIONS |
574 | | IDENTICAL BLOCKS OR MODULAR PANELS FITTED TO REVERSED BLOCKS OR PANELS (E.G., T-SHAPE ATTACHED TO INVERTED T-SHAPE) |
575 | | TRAPEZOID-SHAPED BLOCK (E.G., KEYSTONE) |
576 | | HAVING MEANS (E.G., HOLLOW FORM OR CORE) FORMING CAVITY, CORE, OR CELL IN SLAB |
577 | | . Thin-walled type (e.g., can) |
578 | | MODULE OR PANEL HAVING DISCRETE EDGEWISE OR FACE-TO-FACE CONNECTING FEATURE |
579 | | . Z- or U-strips, aligned flanges forming major faces |
580 | | . Opposed discrete edger-spacers; e.g., hollow panels |
581 | | . Edge-to-edge openwork panels |
588.1 | | . Interfitted integral flange |
582.1 | | . With joining means of dissimilar material and separate from unit |
582.2 | | . . Includes lock or latch mechanism |
583.1 | | . . Connecting protruding ends of units` reinforcement (e.g., rebar) |
584.1 | | . . Clamp type |
587.1 | | . . Protruding tying means (hook or eyebolt) embedded in unit at other end |
586.1 | | . . Tie along and within edge or face groove; e.g., spline |
586.2 | | . . . Spline having particular shape (bone, arrow, dovetail, etc.) |
585.1 | | . . Tie (e.g., dowel) placed in preformed opposed openings |
589.1 | | . Having integral key |
590.1 | | . . Dovetail-type key |
590.2 | | . . . Keys, mortises, or key and mortise on opposed faces or edges |
590.3 | | . . . Having mortise with internal space |
591.1 | | . . Key on angularly related edges or faces |
591.2 | | . . . Multiple, finite keys (e.g, perpendicular sawtooth) |
591.3 | | . . . Key designed for four direction lock |
591.4 | | . . . Rabbet on two perpendicular faces or edge and face (e.g., ship lap) for key |
591.5 | | . . . . With additional locking feature (e.g., fastener) |
592.1 | | . . Keys, mortises, or key and mortise on opposed edges or faces |
592.2 | | . . . Key designed for four direction lock |
592.3 | | . . . . In a vertical arrangement |
592.4 | | . . . Having mortise with internal space |
592.5 | | . . . . And provided for stacking |
592.6 | | . . . Designed for stacking (e.g., key on top surface, mortise on bottom) |
596 | | OPAQUE STONELIKE MODULE |
597 | | . Discrete clip-gripping facing sheet |
598 | | . Lateral retaining feature on facing sheet |
599 | | . . Terminal flanges |
600 | | . Elongated reinforcing |
601 | | . . Dissimilar material edging |
602 | | . . Slab type with integral ribs |
603 | | . With integral spacing projections |
604 | | . Particularly related to adjacent module |
605 | | . Grooves on juncture face |
606 | | . With traversing passage |
607 | | . . Additional intersecting, transversing passage, or groove |
608 | | . Nonrectangular cross-section |
609 | | . . Faces with offset edges |
610 | | . . . L-shaped |
611 | | . . . T-shaped |
612 | | . With layered stonelike components |
782.1 | | COMPOSITE PREFABRICATED PANEL INCLUDING ADJUNCTIVE MEANS |
782.11 | | . Railroad car door |
782.2 | | . Rimmed furniture top formed of face-to-face sheets |
782.21 | | . . Game tabletop |
782.22 | | . . Including flexible top sheet |
782.23 | | . . . With mechanical fastener for securing the rim |
782.24 | | . . With mechanical fastener for securing the rim |
783.1 | | . Sandwich or hollow with sheet-like facing members |
783.11 | | . . Corrugated component |
783.12 | | . . . For door or door shutter |
783.13 | | . . . . Fire resistant |
783.14 | | . . . Juxtaposed corrugated sheets |
783.15 | | . . . . Abutting trough to crest |
783.16 | | . . . . . Angled abutting corrugations |
783.17 | | . . . Corrugated intermediate sheet |
783.18 | | . . . Core of elongated, corrugated spacers |
783.19 | | . . . Corrugated sheet and flat sheet juxtaposed |
784.1 | | . . For door or door shutter |
784.11 | | . . . Fire resistant |
784.12 | | . . . . In-turned opposed flanges form edge of door panel |
784.13 | | . . . In-turned opposed flanges form edge of door |
784.14 | | . . . Multicellular core |
784.15 | | . . . Insulating core |
784.16 | | . . . Having a single hollow cavity |
785.1 | | . . Mirror |
785.11 | | . . . Portable (e.g., hand-held) |
785.12 | | . . . For vehicle |
786.1 | | . . Parallel, transparent panes (e.g., double glass window panel, etc.) |
786.11 | | . . . Intermediate non-glass sheet-like component |
786.12 | | . . . . For vehicle |
786.13 | | . . . Internal spacer |
787.1 | | . . Having internal receiver for elongated lateral fastener |
787.11 | | . . . Sound or heat resistant |
787.12 | | . . . For vehicle |
788.1 | | . . Hermetically sealed, opaque or transparent panel |
789.1 | | . . Dimpled or embossed sheet |
790.1 | | . . Internal, diagonal, elongated stiffener |
791.1 | | . . Perforate or woven sheet |
792.1 | | . . In-turned opposed flanges form panel edge |
792.11 | | . . . Flanges interfit |
793.1 | | . . Multicellular core |
793.11 | | . . . Elongated strip-like laterally spaced elements form core |
794.1 | | . . Insulating core |
795.1 | | . . Having a single hollow cavity |
796.1 | | . Face-to-face sheets in substantially continuous contact |
796.11 | | . . For furniture top |
796.12 | | . . . Having separate attached, elongated edging or stiffener |
797.1 | | . . Having separate attached, elongated edging or stiffener |
798.1 | | . Corrugated or embossed panel having separate attached, elongated edging or stiffener |
799.1 | | . Perforate panel having separate attached, elongated edging or stiffener |
799.11 | | . . Elongated, laterally spaced strips or strands |
799.12 | | . . . Intersecting strips or strands |
799.13 | | . . . . Strip having orifice encompassing intersecting strip |
799.14 | | . . . . Strip interfits edge slot of intersecting strip |
800.1 | | . Having separate attached, elongated edging or stiffener |
800.11 | | . . Overlaps panel edge face and panel major face |
800.12 | | . . . U-shaped channel overlaps panel edge and major faces |
800.13 | | . . . . Closure |
800.14 | | . . . . . Having transparent or transluscent panel |
800.15 | | . . . . . . Separate strips form U-shaped channel |
800.16 | | . . . . . . . Having mechanical fastener (e.g., nail, bolt, screw, etc.) for securing channel |
800.17 | | . . . . . Separate strips form U-shaped channel |
800.18 | | . . . . Having mechanical fastener (e.g., nail, bolt, screw, etc.) for securing channel |
801.1 | | . . Overlaps major face only |
801.11 | | . . . Spaced inwardly of edge face |
801.12 | | . . . . Closure |
802.1 | | . . Overlaps edge face only |
802.11 | | . . . Extends laterally of edge |
630 | | IMPERFORATE PANEL WITH INTEGRAL REINFORCING |
631 | | CORNER FORMED BY LAMINATE WITH BENT FACING SECTION |
632 | | SHAFT OR OPENWORK, AXIALLY EXTENSIBLE |
633 | | OPENWORK; E.G., TRUSS, TRELLIS, GRILLE, SCREEN, FRAME, OR REBAR CHAIR |
634 | | . Truss with unitary chord and web; e.g., sheet metal |
635 | | . . Expanded metal |
636 | | . . Web portions connected between chords |
637 | | . Superimposed three-dimensional units |
638 | | . . Diagonal and horizontal bracing extend from juncture of sections |
639 | | . Curvilinear or peaked truss |
640 | | . . With means to vary camber |
641 | | . . Collapsible or demountable |
642 | | . . Laminated |
643 | | . . Structurally related trusses |
644 | | . . Arcuate chord |
645 | | . Components adjustably or collapsibly connected |
646 | | . . Three-dimensional space-defining |
647 | | . Wire connected to flange of I- or T-type member |
648.1 | | . Three-dimensional space-defining |
649.1 | | . . Reinforcement for settable material |
649.2 | | . . . For beam, column, etc. |
649.3 | | . . . . Having perimeter-surrounding element |
649.4 | | . . . . . Helical |
649.5 | | . . . . . . Collapsible |
649.6 | | . . . . Additional laterally projecting means |
649.7 | | . . . . . Spacer-positioner |
649.8 | | . . . Spacer-positioner |
650.1 | | . . Beam (e.g., girder, joist, etc.) |
650.2 | | . . . Inclined struts or ties meeting at intermediate runner |
650.3 | | . . Openwork deck, walkway, ceiling, etc. |
651.01 | | . . Vertically oriented (e.g., tower, etc.) |
651.02 | | . . . For electrical conductor (e.g., line-pole, line-tower, etc.) |
651.03 | | . . . . Internal transverse spacer for runners |
651.04 | | . . . . Having perimeter-surrounding element (e.g., helical, etc.) |
651.05 | | . . . For supporting hoisting or boring equipment (e.g., derrick, gantry) |
651.06 | | . . . . Inclined struts or ties meeting at intermediate runner |
651.07 | | . . . Column, mast, etc. |
651.08 | | . . . . Internal transverse spacer for runners |
651.09 | | . . . . Inclined struts or ties meeting at intermediate runner |
651.1 | | . . . Scaffolding |
651.11 | | . . Having perimeter-surrounding element |
652.1 | | . . Triangular lattice |
653.1 | | . . Framework |
653.2 | | . . . Having tubular member |
654.1 | | . . Parallel trellises or sheets held by disparate connector |
655.1 | | . . Having specific connector, etc. |
655.2 | | . . . Spheroidal |
656.1 | | . Outside corner or peripherally bordered (i.e., framing, etc.) |
656.2 | | . . Portal frame or closure frame |
656.3 | | . . . Fireproof |
656.7 | | . . . For screen or storm door or window or shutter, etc. |
656.4 | | . . . For door |
656.5 | | . . . For window |
656.6 | | . . . . Metal sash or frame |
656.8 | | . . Grille-type insert |
656.9 | | . . Joint, connector |
657 | | . . "X" or corner brace |
658 | | . . Integral corner; e.g., bent shaft |
659 | | . Embedded-type free, discrete elements; e.g., set or rings |
660 | | . Fabric or lattice; e.g., indeterminate grating |
661 | | . . Perforated with attached filaments |
662 | | . . Plural facially contacting layers |
663 | | . . Discrete component; wholly internal; e.g., architectural grille |
664 | | . . Intersecting strips or strands |
665 | | . . . Separate connector at crossing |
666 | | . . . Face-to-face slats, edges coplanar |
667 | | . . . . Slat orifice encompasses slat |
668 | | . . . . Interfitted edge slot |
669 | | . . . Dissimilar cross-section between crossings |
670 | | . . Expanded metal |
671 | | . . . Laterally displaced sections; e.g., corrugated |
672 | | . . . . Nonexpanded, channel-shaped ribs |
673 | | . . Perforated |
674 | | . . . Corrugated |
675 | | . . . Material laterally displaced |
676 | | . . Mesh type with attached discrete bodies |
677 | | . Spacer-positioner; e.g., rebar chair |
678 | | . . Adjustable support |
679 | | . . Penetrator with limiting stop |
680 | | . . . Hook-type head integral with penetrating leg |
681 | | . . . Penetrating leg traversing separate stop |
682 | | . . . . Cup, bulb, or U-shaped stop |
683 | | . . . . Block-type stop |
684 | | . . Support member retaining means movable or deformable to final position |
685 | | . . . Crossed supported member type |
686 | | . . Crossed supported member type |
687 | | . . Plural feet or seat |
688 | | . . . Units attached to separate connector |
689 | | . . . Single seat |
690 | | . Side-by-side terminus shafts; e.g., truss |
691 | | . . Truss with inclined lower chord |
692 | | . . Truss with compound chord |
693 | | . . Diagonal bracing |
694 | | . . . Continuous serpentine; e.g., Warren truss |
695 | | . . . X-braced; i.e., connectors crossing |
696 | | . . Sheet metal-type spacer-connector |
697 | | . Shaft with truss-braced cross-arm |
698 | | ASSEMBLED IN SITU-TYPE ANCHOR OR TIE |
699 | | . With feature engaging form |
700 | | . . Integral penetrating means |
701 | | . . Separate forms fastener within socket member |
702 | | . Depending cantilevered seat portion; e.g., joist anchor |
703 | | . Traversing-type anchor |
704 | | . Socket type |
705 | | . . Helical anchoring feature |
706 | | . . Traversing rod spaced internally of socket base |
707 | | . . With discrete attached embedded member |
708 | | . . Separate base and wall members forming socket |
709 | | . . Selective stops for element held |
710 | | . . Elongated supported track type |
711 | | . . Internal stop for head of element held |
712 | | . Sheet or wire tie |
713 | | . . Separably connected sections |
714 | | . . Integrally connected different form-fastening feature |
715 | | . . Sheet form with tabs oppositely extending from base sheet |
716.1 | | IN SITU ATTACHED-TYPE CHANNEL OR TRIM STRIP (E.G., EDGING) |
716.2 | | . Water-guard |
716.3 | | . Upholstery trim |
716.4 | | . . With separate means attaching to substructure |
716.5 | | . Vehicle trim |
716.6 | | . . Interengaging fastener and strip edges or flanges (e.g., snap-on type) |
716.7 | | . . . Having resilient-type anchor (e.g., spring clip) |
716.8 | | . Panel gripping channel |
717.01 | | . Portal or closure trim |
717.02 | | . . Thermal break |
718.01 | | . With separate means attaching to substructure |
718.04 | | . . Interengaging fastener and strip edges or flanges (e.g., snap-on type) |
718.05 | | . . . Having rigid shank-type anchor |
718.06 | | . . . Having resilient-type anchor |
718.07 | | . . . . Wire type |
718.02 | | . . Having rigid shank-type anchor |
718.03 | | . . Having resilient-type anchor |
717.03 | | . Flexible strip |
717.04 | | . Multilayer composite |
717.05 | | . Polymeric |
717.06 | | . Metallic |
719 | | CROSSED REINFORCING RODS WITH CONNECTOR |
720.1 | | SHAFT (I.E., ELONGATED RIGID STRUCTURE) |
720.2 | | . Baluster type (e.g., newel post, spindle, etc.) |
720.3 | | . Security bar |
721.1 | | . Stone-like component (e.g., concrete, etc.) |
721.2 | | . . Upright |
721.3 | | . . . Sustainer |
721.4 | | . . . . Having outer layer or shell |
721.5 | | . . . . . Partial sleeve or collar |
722.1 | | . . . Conduit |
723.1 | | . . . Having shell-like outer layer |
723.2 | | . . . . Partial sleeve (e.g., collar, etc.) |
724.1 | | . . Having feature resisting transverse loading (e.g., beam) |
724.2 | | . . . Tension member having attached projection |
724.3 | | . . . Lattice-type structure |
724.4 | | . . . Having arch feature |
724.5 | | . . . Having outer layer or shell |
726.1 | | . End-to-end connected sections |
726.2 | | . . Beam |
726.3 | | . . Upright |
726.4 | | . . . Utility pole |
726.5 | | . . . Chimney, flue, etc. |
729.1 | | . I-beam |
729.2 | | . . Compound construction |
729.3 | | . . . Corrugated web |
729.4 | | . . . Wooden component |
729.5 | | . . Folded sheet material |
730.1 | | . Longitudinally related striplike sections |
730.2 | | . . Reinforcement for settable material |
730.3 | | . . Closure related (e.g., stile, sash bar, mullion, etc.) |
730.4 | | . . . Forms hollow enclosure (e.g., tubular) |
730.5 | | . . . . Having interlocking feature |
730.6 | | . . . Having angular component (e.g., having L, T, Z cross-section) |
730.7 | | . . Wood |
731.1 | | . . Structural support |
731.2 | | . . . Forms hollow enclosure (e.g., box beam) |
731.3 | | . . . . Having interlocking feature |
731.4 | | . . . . Upright |
731.5 | | . . . . . Partition support (e.g., stud, furring, etc.) |
731.6 | | . . . . For vehicle |
731.7 | | . . . Having angular component (e.g., having L, T, Z cross-section) |
731.8 | | . . . . Upright |
731.9 | | . . . . Partition support (e.g., stud, furring, etc.) |
732.1 | | . . Forms hollow enclosure |
732.2 | | . . . Having interlocking feature |
732.3 | | . . . Upright |
733.1 | | . Ceiling hanger |
733.2 | | . Stud, furring-strip, lath-strip, etc. |
733.3 | | . . Having projection which is one piece with shaft |
733.4 | | . . Curtain wall joint |
734.1 | | . For closure or closure portal |
734.2 | | . . Window came, glazing bar, etc. |
735.1 | | . For vehicle |
736.1 | | . Upright (e.g., post, pole, etc.) |
736.2 | | . . Having attached intersecting member (e.g., cross-arm) |
736.3 | | . . Having shell-like outer layer |
736.4 | | . . . Partial sleeve (e.g., collar, etc.) |
737.1 | | . Girder, column, etc. |
737.2 | | . . Plural or composite having attached intersecting member |
737.3 | | . . Wood/metal composite |
737.4 | | . . Having shell-like outer layer |
737.5 | | . . . Partial sleeve (e.g., collar, etc.) |
737.6 | | . . Box-type, channel, or angle, cross-section |
738.1 | | . Having shell-like outer layer |
739.1 | | . Strut |
740.1 | | . Tension member (e.g., re-bar) |
740.2 | | . . Embossed or dimpled |
740.3 | | . . Ribbed |
740.4 | | . . . Longitudinal |
740.5 | | . . . Spiral |
740.6 | | . . Having projection which is one piece with shaft |
740.7 | | . . . Mechanically attached or bonded |
740.8 | | . . Sinuous curve type |
740.9 | | . . Axially twisted |
741.1 | | PROCESSES |
741.11 | | . Requiring soil work |
741.12 | | . . Container |
741.13 | | . . Wall |
741.14 | | . . Upright erection |
741.15 | | . . Support |
741.2 | | . Stair |
741.3 | | . Protection |
741.4 | | . Sealing |
741.41 | | . . Cementitious surfacing |
742.1 | | . Filling preformed cavity |
742.11 | | . . For appliance |
742.12 | | . . Filler is sheet material |
742.13 | | . . Filler material is flowable |
742.14 | | . . . Filler is cementitious (e.g., concrete, etc.) |
742.15 | | . . . . Fastening |
742.16 | | . . Grouting or pointing |
745.01 | | . Storage facility construction |
745.02 | | . Using prefabricated subenclosure |
745.03 | | . . Stacked |
745.04 | | . . Tower support |
745.05 | | . Barrier construction |
745.06 | | . . Cover |
745.07 | | . . . Arcuate |
745.08 | | . . . . Using prefabricated unit |
745.09 | | . . Vertical |
745.1 | | . . . Using prefabricated unit |
745.11 | | . . . . Pivoted unit |
745.12 | | . . . Support |
745.13 | | . . Using prefabricated unit |
745.14 | | . . . Hinged unit |
745.15 | | . Portal or closure construction |
745.16 | | . . Using prefabricated unit |
745.17 | | . Column, mast, etc., construction |
745.18 | | . . Using prefabricated unit |
745.19 | | . Fabrication of member, module, etc. |
745.2 | | . . And moving into position |
745.21 | | . Anchor, bond, etc. |
746.1 | | . Adhering preformed sheet-form member |
746.11 | | . . For roofing |
746.12 | | . . Mosaic veneer |
747.1 | | . Assembling exposed modules |
747.11 | | . . Tiling |
747.12 | | . . Stone-like module |
747.13 | | . . . Refactory |
748.1 | | . . Overlapping or interfolding edges (e.g., shingling, etc.) |
748.11 | | . . . Sheathing |
749.1 | | MACHINE OR IMPLEMENT |
749.11 | | . Tiling |
749.12 | | . Roofing |
749.13 | | . Masonry |
749.14 | | . . Bricklaying machine |
749.15 | | . . Lining |
750 | | MISCELLANEOUS |
| | ***************************** |
| | CROSS-REFERENCE ART COLLECTION |
| | ***************************** |
900 | | HAZARDOUS MATERIAL PERMEATION PREVENTION (E.G., RADON) |
| | ****************************** |
| | DIGESTS |
| | ****************************** |
DIG 1 | | Hand tools for assembling building components |
DIG 2 | | Masonry lattice or openwork |
DIG 3 | | Trailer or mobile home skirt |
DIG 4 | | Magnetic connecting means for building components |
DIG 5 | | Designed for thermal distortion |
DIG 6 | | Toothed connecting means |
DIG 7 | | Synthetic building materials, reinforcements and equivalents (e.g., Rubinstein pats.) |
DIG 8 | | Imitation beams |
DIG 9 | | Structure including reclaimed component (e.g., trash) |
DIG 10 | | Polyhedron |
DIG 11 | | Mobile-structure stabilizing anchor |
DIG 12 | | Temporary protective expedient |
DIG 13 | | Velcro |
DIG 14 | | Shelter shaped to article configuration |
DIG 15 | | Seal for corrugated sheets |
DIG 16 | | Roofing with pressure sensitive adhesive (e.g., shingle from 52/173) |
DIG 17 | | With transparent walls or roof (e.g., sunroom) |