| Subclass |
| Title |
|---|
|
ClassTitle
|
| ===>
TOOLS
|
| | | |
| 2 | ![[Patents]](../gifs/ps.gif) | COMBINED WRENCHES AND PUMPS OR OILERS |
| 3.05 | | SHELL, PROJECTILE, OR WAD EXTRACTORS |
| 3.07 | | RECEPTACLE CLOSURE REMOVER |
| 3.08 | | . Having discrete retainer or receptacle for removed closure |
| 3.09 | | . Combined or plural |
| 3.15 | | . . Attached to receptacle or closure |
| 3.2 | | . Power-, vacuum-, or fluid pressure-operated |
| 3.25 | | . Wall or surface mounted or supported |
| 3.31 | | . . With receptacle supporting or grasping means |
| 3.32 | | . . . With bottom support |
| 3.33 | | . . Rotary remover device, gear or lever actuated |
| 3.27 | | . . Lever or prying type |
| 3.35 | | . Movable into or over handle |
| 3.36 | | . With additional receptacle-engaging means |
| 3.37 | | . . Lever- or gear-translated closure remover |
| 3.29 | | . . For engaging receptacle about closure (e.g., socket type) |
| 3.39 | | . . Bottom support |
| 3.4 | | . Gripping type |
| 3.41 | | . . Finger grapple type |
| 3.42 | | . . With reciprocating closure-engaging |
| 3.43 | | . . With deformable strip-tightening means |
| 3.44 | | . . With pivoted closure-engaging parts |
| 3.45 | | . Screw type |
| 3.55 | | . Levering or prying type |
| 3.47 | | . . With impaling or inserting remover |
| 3.56 | | . . Having discrete relatively movable portions |
| 3.57 | | . . Having handle, intermediate hook, and end fulcrum |
| 3.48 | | . Impaling or inserting type |
| 3.49 | | . . With lateral projection or abutment |
| 3.5 | | SPECTACLE |
| 3.6 | | . Plier |
| 3.7 | | LEAF-SPRING SPREADERS |
| 3.8 | | FUSE PULLERS |
| 4 | | ENGRAVERS' CLAMPS |
| 6 | | WATCHMAKERS' |
| 7 | | . Jewel setters' |
| 7.5 | | . Mainspring winders |
| 8 | | . Ruby pin setters |
| 8.1 | | PACKING |
| 9.2 | | STYLUS |
| 9.21 | | STAMP SCARIFIER |
| 9.22 | | PERFORATOR AND INKER |
| 9.24 | | TAPPET ADJUSTER |
| 9.26 | | PLOWSHARE HOLDER |
| 9.3 | | HOSE-CLAMP APPLIERS |
| 9.4 | | WIRE STRIPPER |
| 9.51 | | . Bench tools |
| 9.41 | | . Having relatively movable clamp and blade |
| 9.42 | | . . Clamp and blade move relative to supporting structure |
| 9.43 | | . . Blade moves relative to handle to remove insulation |
| 9.44 | | . Pivoted blade |
| 10 | | NUT LOCK |
| 13 | | BOLT HOLDERS |
| 15.2 | | REPAIR TOOLS FOR RESILIENT TIRES |
| 15.3 | | . Holders for spread tire casings |
| 15.4 | | . Deflating tools |
| 15.5 | | . Combined cement injectors and plug or patch inserters |
| 15.6 | | . Cement injectors |
| 15.7 | | . Plug or patch inserters |
| 15.8 | | SKID CHAIN APPLYING TOOLS |
| 15.9 | | FOR LOCK OR LATCH |
| 16 | | CHUCK KEY |
| 44 | | HOLDER, PUSHER, OR SETTER FOR DRIVEN-TYPE FASTENERS |
| 45 | | SHINGLE TOOL |
| 46 | | WOODEN FLOORING TOOL |
| 300 | | TOOL JAW(S) POSITIONED BY RELATIVELY MOVABLE PLURAL HANDLES (E.G., PLIERS) |
| 301 | | . Including hydraulic features |
| 302 | | . Antipodal jaw surfaces move apart as handles approach (e.g., outwardly expanding jaws) |
| 303 | | . With three or more jaws |
| 304 | | . . With single pair of handles |
| 305 | | . . . Double pair Janus-jawed |
| 306 | | . . . . With jaws fixed to handle(s) |
| 307 | | . . . With intermediate jaw(s) in line with and between outer jaws |
| 308 | | . . . With three jaws only |
| 309 | | . . . . Two pivoted jaws and one sliding jaw |
| 310 | | . . . . Three coacting pivoted jaws |
| 311 | | . . . With separate jaw pairs |
| 312 | | . . . . Parallel jaws perpendicularly spaced |
| 313 | | . With means requiring a completion of travel of jaw movement |
| 314 | | . With means for step-by-step jaw movement |
| 315 | | . With means to immobilize handles against relative angular movement and means to move jaw(s) thereafter |
| 316 | | . . With plural selective handle positions |
| 317 | | . . With means for relative longitudinal handle movement |
| 318 | | . With means to immobilize jaws |
| 319 | | . . With lock-release means |
| 320 | | . . With lock-disabling means |
| 321 | | . . Including spring-urged handles or jaws |
| 322 | | . . . And spring-urged latch |
| 323 | | . . Spring-urged latch element(s) |
| 324 | | . . Positive lock means |
| 325 | | . . . With plural selective jaw positions |
| 326 | | . . . . Threaded lock means |
| 327 | | . . . . . With threaded jaw adjustment means |
| 328 | | . . . . Interdigitated lock means |
| 329 | | . With means (nontoggle) to hold jaws against only retrograde movement |
| 330 | | . . With plural preselective jaw positions |
| 331 | | . . Manipulated lock member |
| 332 | | . . . Pivoted bail |
| 333 | | . . . Sliding yoke |
| 334 | | . . . Threaded member |
| 335 | | . . . . Nut |
| 336 | | . . . Pivoted rack |
| 337 | | . . . Pivoted pawl |
| 338 | | . . Rack and pawl means |
| 339 | | . . Coacting friction means |
| 340 | | . . . Serrated surfaces |
| 341 | | . With means to vary range limit(s) of jaw movement |
| 342 | | . Jaw-actuating means (handle-manipulation conversion) |
| 343 | | . . With means to choose one of a plurality of actuator leverages |
| 344 | | . . . Predetermined and discrete member of leverage selections |
| 345 | | . . Axial motion of handle-attached actuators(s) |
| 346 | | . . Pivotal motion about axis of parallel actuator rod(s) |
| 347 | | . . With means to articulate and/or slide both jaws |
| 348 | | . . . With means for arcuate motion of both jaws |
| 349 | | . . . . Cam actuator |
| 350 | | . . . . Dual pivoted actuator levers |
| 351 | | . . . . . With jaws pivoted together |
| 352 | | . . . With means for parallel movement of work-engaging surfaces |
| 353 | | . . . . Longitudinal guide means |
| 354 | | . . . . Lateral guide means |
| 355 | | . . With means for sliding jaw actuation |
| 356 | | . . . With adjustment means |
| 357 | | . . . . Pivoted pawl type |
| 358 | | . . . Pinion and rack |
| 359 | | . . . Claw lever and rack or notch |
| 360 | | . . . . Plural teeth on claw |
| 361 | | . . . Grip lever and cam |
| 362 | | . . . Grip lever and link |
| 363 | | . . . . Toggle link |
| 364 | | . . Including claw lever and rack or notch means |
| 365 | | . . . With adjustment means |
| 366 | | . . . Plural teeth on claw |
| 367 | | . . Including toggle means |
| 368 | | . . . With toggle release |
| 369 | | . . . . By means acting on intermediate pivot |
| 370 | | . . . . . Release means carried by grip lever |
| 371 | | . . . . . . Mounted on intermediate pivot |
| 372 | | . . . With means to limit movement of intermediate pivot |
| 373 | | . . . With means for relative parallel movement of jaws |
| 374 | | . . . With pitman between grip lever and intermediate pivot |
| 375 | | . . . With toggle linkage and actuated jaw mounted on carrier |
| 376 | | . . . With connecting rod between grip lever and actuated jaw |
| 377 | | . . . With connecting rod between grip lever and handle member |
| 378 | | . . . . With actuated jaw pivoted on handle member |
| 379 | | . . . . . With means for resiliently biasing jaw and/or toggle |
| 380 | | . . . . . . Extension coil spring between jaw and handle member |
| 381 | | . . Including grip lever actuator and pivoted jaw (e.g., tandem levers) |
| 382 | | . . . With adjustment means |
| 383 | | . . . With link connecting jaw and grip lever |
| 383.5 | | . . Including cam actuator and pivoted jaw |
| 384 | | . . With adjustment means |
| 385 | | . Adjustable relationship between jaw(s) and/or handle(s) |
| 386 | | . . By relative positioning of jaw(s) only |
| 387 | | . . . Both jaws adjustable |
| 388 | | . . . By threaded elements |
| 389 | | . . . . Rotatable screw type |
| 390 | | . . . . Rotatable nut type |
| 391 | | . . . Maintained by detent and rack |
| 392 | | . . . Maintained by locked interdigitated members |
| 393 | | . . By angular orientation of one handle portion relative to other |
| 394 | | . . By selection of pivot hole(s) in each handle |
| 395 | | . . By threaded adjustment means |
| 396 | | . . . Worm and rack type |
| 397 | | . . . Peripherally threaded handle manipulated for travel relative to other handle |
| 398 | | . . . Threaded element travels relative to both handles |
| 399 | | . . . Rotatable screw in nut |
| 400 | | . . . . Screw attached to joint |
| 401 | | . . . . Nut attached to joint |
| 402 | | . . . Rotatable nut on screw |
| 403 | | . . . . Screw attached to joint |
| 404 | | . . . . Nut attached to joint |
| 405 | | . . By manipulation of pivot-carrying member |
| 406 | | . . . With angular orientation of eccentric pivots joining handles |
| 407 | | . . By relative sliding or slipping of handles |
| 408 | | . . . With fulcrum-carrying member |
| 409 | | . . . . With positive lock for member |
| 409.5 | | . . . . With spring urged lock for member |
| 411 | | . . . With pivot pin fulcrum in notched slot |
| 412 | | . . . . With flattened cross section pin |
| 413 | | . . . With toothed-member fulcrum on notched handle |
| 414 | | . . . With opposed interdigitated concentric segmental annular portions |
| 415 | | . Crossed handles |
| 416 | | . . Joint detail |
| 417 | | . . Resiliently urged |
| 418 | | . Jaw features |
| 419 | | . . Tined or digitated jaws |
| 420 | | . . Jaws extend laterally beyond side edge plane of handle(s) |
| 421 | | . . Jaw attachment and/or inserts |
| 422 | | . . . Selective |
| 423 | | . . . . By detachment |
| 424 | | . . . Articulated |
| 424.5 | | . . Nonplanar jaw face |
| 426 | | . . . And diversely shaped face |
| 426.5 | | . . . Work conforming face |
| 427 | | . Resiliently urged |
| 427.5 | | . Handle |
| 463 | | INCLUDING TOOL DRIVING BY IMPACT DELIVERING COMPONENT OR COOPERATING ANVIL |
| 464 | | . Motor or gear driven |
| 465 | | . Structurally constrained to arcuate movement |
| 466 | | . . About turning axis of work engaging portion |
| 52 | | WRENCH, SCREWDRIVER, OR DRIVER THEREFOR |
| 53.1 | | . With elongated hot line stick |
| 53.11 | | . . Globe manipulator |
| 53.12 | | . . . Rotatable grasper |
| 53.2 | | . Stud-removal and implacement |
| 429 | | . Responsive to movement of work |
| 467 | | . Responsive to torque on work |
| 468 | | . . With marking mechanism |
| 469 | | . . Means for regulating motor |
| 470 | | . . . Fluid motor |
| 471 | | . . Permanently deformable component |
| 472 | | . . Relatively movable work contacting components |
| 473 | | . . Rotatable, coaxial, clutching components |
| 474 | | . . . Having intermediate, disparate, interlock element |
| 475 | | . . . Having complementary formations |
| 476 | | . . . Having friction type contact surfaces |
| 477 | | . . Work engaging portion attached to and turned by resilient member |
| 478 | | . . Work engaging portion pivotally or rotatably connected to handle |
| 479 | | . . . With electric signal device |
| 480 | | . . . Axis of connection coaxial to rotational axis of work |
| 481 | | . . . . With arm extending from portion |
| 482 | | . . . . With pivoted locking pawl |
| 483 | | . . . With arm extending from portion and through connection |
| 54 | | . Machine |
| 55 | | . . Bolt-holding |
| 56 | | . . . Gear-operated |
| 57 | | . . Gear-operated |
| 57.11 | | . . . With motor |
| 57.12 | | . . . . Oblique angle drive |
| 57.13 | | . . . . Right angle drive |
| 57.14 | | . . . . Parallel axis drive |
| 57.15 | | . . . Round work |
| 57.16 | | . . . . With additional work-engaging means |
| 57.17 | | . . . . Flexible jaw |
| 57.18 | | . . . . Cam-operated jaw |
| 57.19 | | . . . . Fluid-operated jaw |
| 57.2 | | . . . . Pivoted jaw |
| 57.21 | | . . . . Sliding jaw |
| 57.22 | | . . . Multiple drive or driven means |
| 57.23 | | . . . . With magazine |
| 57.24 | | . . . With support |
| 57.25 | | . . . . Vehicular |
| 57.26 | | . . . Adjustable angle drive |
| 57.27 | | . . . . Flexible shaft |
| 57.28 | | . . . Oblique angle drive |
| 57.29 | | . . . Right angle drive |
| 57.3 | | . . . Parallel axis drive |
| 57.31 | | . . . Common axis drive |
| 57.32 | | . . Double or duplex |
| 57.33 | | . . Round work |
| 57.34 | | . . . With additional work-engaging means |
| 57.35 | | . . . With support |
| 57.36 | | . . Multiple work-engaging means |
| 57.37 | | . . With feed or magazine means |
| 430 | | . . . Utilizing fluid to convey work |
| 431 | | . . . Including chute having longitudinal axis collinear with rotational axis of work turning portion |
| 432 | | . . . Including vibratory work supporting member |
| 433 | | . . . Including revolvably driven work contacting member |
| 434 | | . . . Including driven, flexible, work supporting strip |
| 435 | | . . . Including driven, reciprocating, conveying member |
| 57.38 | | . . With tensioning means |
| 57.39 | | . . Step by step |
| 57.4 | | . . With support |
| 57.41 | | . . . Vehicular |
| 57.42 | | . . Direct drive |
| 57.43 | | . . . Flexible |
| 57.44 | | . . . Fluid |
| 57.45 | | . . . Oblique angle |
| 57.46 | | . . . Tangential engagement |
| 57.5 | | . Turret head |
| 74 | | . Wheel or endless track operated |
| 75 | | . . Hub-rim grasp |
| 76 | | . . . Internal |
| 58 | | . Handle clutched to head |
| 58.1 | | . . With additional head-turning means |
| 58.2 | | . . Radially slotted or open end head |
| 58.3 | | . . Axially movable clutching parts |
| 58.4 | | . . Positive two-way drive (e.g., dog clutch) |
| 58.5 | | . . Radially extending eccentrically movable handle |
| 59.1 | | . . Ball or roller wedge |
| 60 | | . . One-way detent drive, e.g., ratchet |
| 61 | | . . . Pivoted pawl |
| 62 | | . . . . Reversing |
| 63 | | . . . . . Single |
| 63.1 | | . . . Reversing |
| 63.2 | | . . . . Single pawl |
| 436 | | . Having work engaging and force exerting portion inserted into cavity (e.g., allen wrench, screwdriver) |
| 437 | | . . Combined with or usable as diverse-type wrench |
| 438 | | . . Having structure adapting portion or tool for separation |
| 439 | | . . Including discrete, separately usable inserted portions |
| 440 | | . . . Pivotally or rotatably mounted |
| 441 | | . . Inserted portion cuts into or deforms cavity |
| 442 | | . . Inserted portion having relatively movable components |
| 443 | | . . . Having camming or wedging element for moving components |
| 444 | | . . . . Axially shiftable element located between and wedging against components |
| 445 | | . . . . . With threaded surface for cooperating with mating tool structure |
| 446 | | . . . . Rotatable element located between and camming against components |
| 447 | | . . . Having cooperating threaded element type actuating means |
| 448 | | . . . Having resilient or spring biased component |
| 449 | | . . . . Biased component rotated about axis collinear to rotational axis of tool |
| 450 | | . . Inserted portion mounted to pivot or swivel relative to longitudinal axis of handle |
| 451 | | . . With separate means for guiding or gripping work |
| 452 | | . . . Having resilient, relatively movable, work gripping members |
| 453 | | . . . . With camming or wedging element for moving members |
| 454 | | . . . Having pivoted, relatively movable, work gripping members |
| 455 | | . . . . With camming or wedging element for moving members |
| 456 | | . . . Having member with work underlying portion |
| 457 | | . . . . Member spring biased for axial movement |
| 458 | | . . . . Resilient member |
| 459 | | . . Inserted portion having threaded periphery |
| 460 | | . . Inserted portion having plural, noncollinear blades (e.g., Phillips) |
| 461 | | . . Inserted portion having plural, separate, work-engaging projections |
| 64 | | . Flexible |
| 65 | | . . Threaded adjustment |
| 65.2 | | . . Link |
| 68 | | . . . Handle jaw |
| 69 | | . . . . Pivoted |
| 70 | | . . . . Duplex |
| 65.4 | | . . . Toothed adjustment |
| 73 | | . U-crank arm |
| 77 | | . Double-ended, simultaneous adjustment |
| 90.1 | | . Plural pivoted jaws and handle-lever |
| 90.2 | | . . Cam or gear operated |
| 90.3 | | . . Jaws enclose work |
| 90.4 | | . . . Including latch to connect jaw to handle-lever |
| 90.5 | | . . . . At least three jaws enclose work |
| 90.6 | | . . . Including latch to connect pivoted jaws |
| 90.7 | | . . . . At least three jaws enclose work |
| 90.8 | | . . . . . Two jaw pairs connected by latch |
| 90.9 | | . . Including means to adjust or to secure jaw in adjusted position |
| 91.1 | | . . Slidable pivot |
| 91.2 | | . . First jaw pivoted directly to handle and to second jaw |
| 91.3 | | . . Two jaws pivoted directly to intermediate member |
| 92 | | . Pivoted inner jaw |
| 93 | | . . Nut or screw fulcrum |
| 94 | | . . Pin fulcrum |
| 95 | | . . . Roller jaw |
| 96 | | . . . . Pinion |
| 97 | | . . . Spring-pressed |
| | | . Pivoted outer jaw |
| | | . . Fixed fulcrum |
| 98 | | . . . Nontraveling jaw |
| 99 | | . . . . Spring-pressed |
| 100 | | . . . Traveling jaw |
| 101 | | . . . . Nut fulcrum |
| 102 | | . . . . Rocking sleeve |
| 103 | | . . . . . Spring-pressed |
| 104 | | . . . . . . Fulcrum washer |
| 105 | | . . . . . . Sleeve-enclosed nut |
| 106 | | . . Traveling fulcrum |
| 107 | | . . . Threaded handlebar |
| 108 | | . . . . Axillary rotating |
| 109 | | . . . Slotted guide |
| 110 | | . . . Fulcrum tooth and rack |
| 111 | | . Pivoted side jaw |
| 112 | | . . Bevel-closing |
| 113 | | . . . Cammed into socket by axial nut or screw |
| 114 | | . . . . Sleeve socket nut |
| 115 | | . . . Rotating ring |
| 116 | | . . . Wedge |
| 117 | | . . Rocking link |
| 118 | | . . Transverse screw clamp |
| 126 | | . Sliding jaw, handle-lever grip |
| 127 | | . . Claw |
| 128 | | . Sliding jaw, cam-closing |
| 129 | | . Slidable jaw adjustments |
| 129.5 | | . . Rack |
| 131 | | . . . Interlocking jaw handles |
| 132 | | . . . Locking set screw or nut |
| 133 | | . . . Pinion lock |
| 134 | | . . . Pivoted rack catch |
| 135 | | . . . . Nontraveling |
| 136 | | . . . . . Intermediate fulcrum |
| 137 | | . . . . Transverse |
| 138 | | . . . . Cam-seated |
| 139 | | . . . . Indirectly operated |
| 140 | | . . . . Intermediate fulcrum |
| 141 | | . . . Shank-engaged cam |
| 142 | | . . . Sliding rack catch |
| 143 | | . . . . Cam-seated |
| 144 | | . . . . Screw- or nut-seated |
| 145 | | . . . . Spring-seated |
| 146 | | . . . Spring-seated jaw frame |
| 147 | | . . . . Integral frame and teeth |
| 148 | | . . . Wedge lock |
| 149 | | . . . . Wedge pusher |
| 150 | | . . Shank grip |
| 151 | | . . . Side jaw |
| 152 | | . . . Clutch yoke |
| 153 | | . . . Roller clutch |
| 154 | | . . . Locking incline |
| 155 | | . . Thread |
| 156 | | . . . Displaceable half nut |
| 157 | | . . . Displaceable nut or screw |
| 158 | | . . . . Traveling screw, shank rack |
| 159 | | . . . Interrupted |
| 160 | | . . . . Nut set |
| 161 | | . . . . . Traveling nut |
| 162 | | . . . . Traveling screw, shank rack |
| 163 | | . . . Right and left threads |
| 164 | | . . . Rotatable threaded handle shank |
| 165 | | . . . Sliding side jaw |
| | | . . . Nontraveling rotatable nut |
| 166 | | . . . . Intermediate |
| 167 | | . . . . . Causing outer jaw to slide |
| 168 | | . . . . Terminal |
| 169 | | . . . . . Causing outer jaw to slide |
| 170 | | . . . Nontraveling rotatable screw |
| 171 | | . . . . Bracket-bearing |
| 172 | | . . . . Spiral groove engaged by slidable actuator |
| 173 | | . . . Traveling and rotating nut |
| 174 | | . . . . Threaded handlebar |
| 175 | | . . . Traveling and rotating screw |
| 176 | | . . . . Shank rack |
| 176.1 | | . Spanner |
| 176.15 | | . . Having means to engage work axially |
| 176.2 | | . . . And means to engage peripheral face of work |
| 176.3 | | . . Having relatively movable jaws |
| 119 | | . Rigid jaws |
| 120 | | . . Round work |
| 121.1 | | . . Enclosed (e.g., socket) |
| 122 | | . . . Watch and clock keys |
| 123 | | . . . . Dust protectors |
| 124.1 | | . . . With nut ejectors |
| 125 | | . . . Work-holding |
| 124.2 | | . . . Slotted socket |
| 124.3 | | . . . Through socket and perpendicular handle |
| 124.4 | | . . . Plural sockets |
| 124.5 | | . . . . Slidably or pivotally connected to handle or each other |
| 124.6 | | . . . Having axial opening for removable handle |
| 124.7 | | . . . Having perpendicular handle |
| 125.1 | | . . Double-ended |
| 177.1 | | . Handle or shank |
| 177.8 | | . . Angularly adjustable handle |
| 177.9 | | . . . With yieldable one-way detent |
| 177.2 | | . . Extensible handle or handle extension |
| 177.3 | | . . Having finger opening |
| 177.4 | | . . Having means to store parts |
| 177.5 | | . . Having terminal cross arm |
| 177.6 | | . . Foldable or flexible |
| 177.7 | | . . Having pivoted handle section |
| 177.75 | | . . . Universal joint |
| 177.85 | | . . Including socket and boss type connecting means |
| 178 | | . Reversible jaws |
| 179 | | . Sliding jaw face |
| 462 | | . Having stationary structure for supporting wrench or screwdriver |
| 180.1 | | . Attachment, or including adjunct or replaceable portion |
| 181 | | . . Cutters |
| 182 | | . . . Rotary |
| 183 | | . . Roller clutch |
| 184 | | . . Shank-embracing |
| 185 | | . . Socket reducers |
| 185.1 | | . . Removable jaw face |
| 185.2 | | . . Movably mounted |
| 186 | | . Jaw faces |
| 19 | | DEFORMABLE HEAD MALLET |
| 20 | | HAMMER |
| 21 | | . Having work protector surrounding face |
| 22 | | . Having shock absorbing means |
| 23 | | . Having nail placer |
| 24 | | . . Magnetic |
| 25 | | . Having replaceable striking face |
| 26 | | . Having plural striking faces |
| 27 | | . Rod encircling type |
| 28 | | BIT STOCK HAVING MANUAL DRIVE MEANS (E.G.,BRACE) |
| 29 | | . Having ratchet mechanism |
| 30 | | . . Straight crank arm |
| 31 | | . . Adjustable pawl |
| 32 | | . . Pivoted pawl |
| 33 | | . . Sliding pawl |
| 34 | | . Straight stock having side driving gear |
| 35 | | . Having U-shaped crank arm |
| 36 | | . . Speeding gear |
| 37 | | . . Bit shaft inclined relative to crank |
| 484 | | FOR ADJUSTING VARIABLE POSITIONED PARTS |
| 485 | | SPREADER |
| 486 | | RESILIENT ARTICLE TENSIONER OR COMPRESSOR |
| 489 | | HANDLE FOR TOOL |
| 490 | | . Having storage compartment |
| 491 | | . Having discrete relatively movable tool clamp |
| 492 | | . Having cap or reinforcing means |
| 487 | | HAND HELD HOLDER OR HAVING CLAMP |
| 488 | | MISCELLANEOUS |
| | | ****************************** |
| | | CROSS-REFERENCE ART COLLECTIONS |
| | | ****************************** |
| 900 | | WRENCH OR SCREWDRIVER CONSTRUCTED FROM SPECIFIC MATERIAL |
| 901 | | WRENCH OR SCREWDRIVER ADAPTED TO TURN EYE SCREW |
| | | ****************************** |
| | | DIGESTS |
| | | ****************************** |
| DIG 1 | | Tool-support adjuncts |
| DIG 2 | | Spiral drive for wrenches |
| DIG 3 | | Wrenches, thread-adjustment lock |
| DIG 4 | | Double adjustments, sliding jaw |
| DIG 5 | | Wrench scales and indicia |
| DIG 6 | | Spring means biasing wrench jaws |
| DIG 7 | | Bicycle spoke or nipple wrench |
| DIG 8 | | Crowfoot-type wrenches |
| DIG 9 | | Pivoted jaw latch means |
| DIG 10 | | Iris-type wrench head |
| DIG 11 | | Adapters for different-sized fasteners |
| DIG 12 | | Power hammer |
![[Manual of Classification, Class Listing]](../gifs/moc.gif)
![[Classification Index]](../gifs/c_index.gif)
![[USPTO Home Page]](../gifs/home.gif)
![[Top]](../gifs/top.gif)