| Patents > Guidance, Tools, and Manuals > Classification > Class Schedule |
|
|
|
| Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
|
| You are viewing a USPC Schedule. |
|
| Class 408 | CUTTING BY USE OF ROTATING AXIALLY MOVING TOOL |
| Click here for a printable version of this file | |
![[List of Pre Grant Publications for class 408 subclass 1R]](../as.gif) | ![[List of Patents for class 408 subclass 1R]](../ps.gif) | 1R | PROCESSES |
| | 2 | WITH MEANS TO WEIGH OR TEST WORK OR PRODUCT |
| | 3 | WITH MEANS TO REGULATE OPERATION BY USE OF TEMPLET, TAPE, CARD, OR OTHER REPLACEABLE INFORMATION SUPPLY |
| | 4 | WITH INTERLOCK BETWEEN MACHINE ELEMENTS |
| | 5 | WITH RANDOMLY-ACTUATED STOPPING MEANS |
| | 8 | WITH CONTROL MEANS ENERGIZED IN RESPONSE TO ACTIVATOR STIMULATED BY CONDITION SENSOR |
| | 14 | WITH STOPPING UPON COMPLETION OF PRESCRIBED OPERATION |
| | 16 | WITH SIGNAL, INDICATOR, ILLUMINATOR OR OPTICAL MEANS |
| | 17 | INCLUDING MEANS TO CAUSE TOOL TO PROGRESSIVELY VIBRATE TOWARD WORK |
| | 18 | WITH MEANS TO CONDITION TOOL |
| | 19 | WITH MEANS TO DEFORM WORK TEMPORARILY |
| | 20 | CONVERTIBLE CUTTING MEANS |
| | 22 | COMBINED CUTTING MEANS |
| | 23 |  Including tool operating on rotating work |
| | 24 | Plural other type cutting means |
| | 26 | Including rotating cutter other than rotating, axially moving tool |
| | 30 | Including plunging (single stroke) cutter |
| | 31 | MACHINE INCLUDING PLURAL TOOLS |
| | 32 | Axes of tools moving with work during operation |
| | 33 |  Including means to infeed tool and means to infeed work or including coaxial tools |
| | 34 | Plural work stations |
| | 35 | Turret of tools |
| | 36 | Coaxial tools |
| | 42 | Plural, simultaneously operational tools |
| | 43 | With plural simultaneously operational work stations |
| | 46 | With provision for adjustment of relationship of axes |
| | 47 | At least one tool driven by orbiting wrist plate |
| | 48 | At least one tool including flexible drive connection |
| | 49 | With work-infeed |
| | 50 | With means to advance work relative to tool |
| | 51 | With presser-foot |
| | 52 | With tool-opposing, work-engaging surface |
| | 53 | Rotatable about parallel axes |
| | 54 | WITH RADIALLY OUTER LIMIT OF CUTTING EDGE MOVING TO DEFINE CYLINDER PARTIALLY, BUT NOT ENTIRELY ENCIRCLED BY WORK |
| | 55 | AXIS OF TOOL MOVING WITH WORK DURING OPERATION |
| | 56 | WITH MEANS TO APPLY TRANSIENT, FLUENT MEDIUM TO WORK OR PRODUCT |
| | 57 | Including tool with duct |
| | 58 | And means to move gaseous fluid by application of vacuum |
| | 59 | Conducting channel extending to end of tool |
| | 60 | Including nozzle |
| | 61 | Including nozzle |
| | 62 | WITH WORK-INFEED MEANS |
| | 63 | Driven by fluid motor |
| | 64 | Driven by means having sliding engagement therewith |
| | 65 | Driven by lever or connecting link |
| | 66 | And gear to drive infeed means |
| | 67 | WITH PRODUCT HANDLING OR RECEIVING MEANS |
| | 69 | WITH WORK ADVANCING OR GUIDING MEANS |
| | 72R | WITH WORK-ENGAGING STRUCTURE OTHER THAN TOOL OR TOOL-SUPPORT |
| | 73 | With means actuated by work to release tool from fixed position in tool support |
| | 75 | Centering means adapted to be replaced by tool |
| | 76 | Magnetic or suction means |
| | 77 | Tool supporting wheel |
| | 79 | Frictionally engaging sides of opening in work |
| | 84 | Funnel like work-engaging surface cooperating with protuberance on work |
| | 85 | Adapted to "form" recession in work |
| | 87 | Having tool-opposing, work-engaging surface |
| | 88 | Tool having shiftable tool-axis |
| | 89 | Angularly adjustable surface |
| | 91 | Laterally adjustable surface |
| | 92 | Flexible or concatenated member |
| | 93 | Connected to tool through opening being enlarged by tool |
| | 95 | With presser foot |
| | 99 | With means to move tool relative to other work-engaging structure along tool-axis |
| | 102 | Tool having screw-thread engaging frame to cause infeed |
| | 103 | Work-gripping clamp |
| | 104 | Adapted to coaxially grip round work |
| | 108 | Oppositely moving lateral clamps |
| | 109 | Adjustable relative to tool-axis |
| | 110 | Movable relative to tool along tool-axis |
| | 113 | Axially fixed to tool |
| | 115R | Adjustable, tool-guiding jig |
| | 72B | Bushing |
| | 116 | TOOL-SUPPORT WITH MEANS TO RECEIVE TOOL-POSITION INDICATOR |
| | 117 | PLURAL TOOL-ASSEMBLAGES |
