| Patents > Guidance, Tools, and Manuals > Classification > Class Schedule |
|
|
|
| Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
|
| You are viewing a USPC Schedule. |
|
| Class 269 | WORK HOLDERS |
| Click here for a printable version of this file | |
![[List of Pre Grant Publications for class 269 subclass 1]](../as.gif) | ![[List of Patents for class 269 subclass 1]](../ps.gif) | 1 | HAND MANEUVERED OR WORK SUPPORTED TOOL GUIDES |
| | 3 | OPERATOR SUPPORTED |
| | 4 |  Convertible to bench supported |
| | 5 | With opening through handle for work supply |
| | 6 | Handle manipulation for jaw actuation |
| | 7 | SOLIDIFICATION OF WORK CONTACTING MEDIUM |
| | 8 | MAGNETIC HOLDER |
| | 9 | PLURAL SELECTIVELY USED HOLDERS |
| | 11 | WITH HOLDER ILLUMINATING MEANS |
| | 12 | WITH DRY RUN WORK DRIVING MEANS |
| | 13 | WITH PRODUCT DISCHARGE FACILITATOR |
| | 15 | WITH CATCH PAN |
| | 16 | WITH PART OR TOOL HOLDING RECEPTACLE |
| | 17 | WITH GROUND TRAVERSING MEANS |
| | 19 | WITH PLUMB INDICATOR |
| | 20 | WITH FLUID MEANS |
| | 21 | Vacuum-type holding means |
| | 22 | With movable diaphragm |
| | 23 | With safety means |
| | 24 | Plural positioning means sequentially operated |
| | 25 | Cylinder-piston means directly moves jaw(s) |
| | 27 | Cylinder-piston means in series with additional positioning means |
| | 28 |  With separate air means in series with liquid means |
| | 29 | Including self-contained manual pump means |
| | 30 | With common fluid means for holding and releasing |
| | 32 | Mechanical means between fluid means and jaw |
| | 35 | With guide means |
| | 36 | FENCE BOARD HOLDER AND GAUGE |
| | 37 | PLURAL HOLDERS TO HOLD WORKPIECES RELATIVE TO EACH OTHER |
| | 38 | Fletching jig (i.e., arrow feathering holder) |
| | 40 | Fixed work-contacting portions for each holder |
| | 41 | Workpieces normal to each other (e.g., miter clamps) |
| | 43 | Workpieces parallel to each other (e.g., box-shook clamp) |
| | 45 | With means to relatively array or arrange holders |
| | 46 | SUSPENDED HOLDER |
| | 47 | HOLDER INSERTED WITHIN WORK APERTURE |
| | 48 | With tool couple element |
| | 48.1 | Expandable mandrel |
| | 49 | Inserted holder movable relative to work backup |
| | 50 | Holder mounted for movement |
| | 52 | Within concentric opening |
| | 53 | PIN-TYPE HOLDER |
| | 54 | With work-overlying clamp |
| | 54.1 | With means to drive pin into work |
| | 54.4 | With work-underlying support |
| | 55 | HOLDER MOUNTED FOR MOVEMENT |
| | 56 | Relative to a station |
| | 58 | Including means to shift holder position |
| | 63 | With indexing steps |
| | 71 | With plural means for changing holder positions |
| | 74 | Means for position lock |
| | 86 | RELATIVELY MOVABLE JAWS |
| | 87 | With tool couple element |
| | 88 | Convertible to other type or form of holder |
| | 89 | Jaw actuation locks holder position relative to base |
| | 90 | With separate means to lock jaw(s) after actuation |
| | 91 | Clamp couple element with fastening means |
| | 95 | With means to fasten holder to support (e.g., portable) |
| | 96 | Wrench or plier type of work holder |
| | 97 | Clamp type fastening means |
| | 99 | Socket type fastening means |
| | 101 | Threaded fastening means |
| | 102 | Nail or spur fastening means |
| | 103 | For cable about thimble (e.g., rigger's vise) |
| | 104 | Plural jaw pairs, angularly oriented, for common work |
