Patents > Guidance, Tools, and Manuals >> Classification >>> Class Definition

Class Numbers & Titles   | Class Numbers Only   | USPC Index   | International   | HELP

You are viewing a Class definition.

CLASS 216,	ETCHING A SUBSTRATE: PROCESSES
Click here for a printable version of this file

SECTION I - CLASS DEFINITION

Class 216 is an integral part of Class 156. It incorporates all the definitions, rules, and hierarchy pertaining to subject matter of Class 156.

GENERAL STATEMENT OF CLASS 216 SUBJECT MATTER:

This is the Generic class for chemical etching processes for treating articles of commerce or intermediate articles not otherwise provided for in which one of the manufacturing steps includes a chemical etching step (use of an etchant) and wherein the material treated is not completely removed.

SECTION II - LINES WITH OTHER CLASSES AND WITHIN THIS CLASS

Class 216 is an integral part of Class 156. It incorporates all the definitions, rules, and hierarchy pertaining to subject matter of Class 156.

Etching compositions are in Class 252, subclasses 79.1-79.4 (see the class line below in regards to Class 252 and nominal etching processes) and etching apparatus is classifiable in Class 156, subclasses 345.1-345.55. Compounds dis as useful in etching are classified in the respec compound classes and articles which are produced as the result of an etching process are classified in the appropriate article class or stock material class.

A. SPECIAL CLASS LINES

1. CLASS 29, METAL WORKING

Class 216 has several important relationships with this Class 29. Both classes take designated single-step processes, and both are locations for multistep processes for manufacturing designated products or using certain combinations of steps.

Single-step processes to produce a Class 29 special product, include shaping particulate metal by pressure alone. In addition Class 29 provides, for example, for processes of burnishing, filing, or the mechanical joining of parts to manufacture the special article. Where only an etching step is claimed, the process is assigned to Class 216, even though a product designated for Class 29 is manufactured.

Multistep processes for Class 29 are of two types: (a) Those for making specified articles, enumerated in that part of Class 29 schedule which precedes subclass 400.1.; (b) Multistep manufacturing processes not provided for elsewhere.

Insofar as processes of type (a) are concerned, these are assigned to Class 29, even when an etching step is claimed as part of the multistep process, except for processes classifiable in subclasses 825+, which follows the category (b) rule given in the next paragraph.

Processes of type (b) are provided for in Class 216 when they claim: (1) Etching combined with the shaping of a nonmetal; (2) Etching either nominal or specific combined with broad or nominally claimed metal shaping steps; (3) Specific etching including steps for assembling parts that have been etched or are to be etched;

Processes of type (b) are classified in Class 29 when they claim: (1) Nominal etching combined with specific metal shaping steps; (2) Nominal etching combined with mechanical joining, either broad or specific.

2. CLASS 438 SEMICONDUCTOR DEVICE MANUFACTURING: PROCESS.

Classification is proper for Class 438:

(1) When the specification contains only disclosure of semiconductive material, precursor, substrate, or device and the claims are generic in nature the classification is proper for Class 438.

(2). When the specification contains disclosure to species of semiconductive material, precursor, substrate, or device and nonsemiconductive species and the claims are directed to the semiconductive material species only classification is proper for Class 438.

(3) When the specification contains disclosure to species of semiconductive material, precursor, substrate, or device only and the claims are directed to semiconductive material species only classification is proper for Class 438.

Classification is proper for Class 216:

(1) When the specification contains disclosure to species of semiconductive material, precursor, substrate, or device and nonsemiconductive species and the claims are generic in nature the classification is proper for Class 216 Etching.

(2) When the specification contains disclosure to species of semiconductive material, precursor, substrate, or device and nonsemiconductive species and the claims contain semiconductive species and nonsemiconductive species classification is proper for Class 216 Etching.

(3) When the specification contains disclosure to semiconductive material used in a nonelectrical function and the claims contain semiconductive material used in nonelectrical function classification is proper for Class 216 Etching.

B. GENERAL LINE WITH OTHER CLASSES

1. CLASS 134 CLEANING AND LIQUID CONTACT WITH SOLIDS

Class 134 is noted for cleaning processes wherein a surface is treated to remove or separate unwanted adherent material, e.g., dirt, scale, coatings, etc. Class 134, subclasses 1.1 through 1.3 provide for processes of cleaning using a plasma and for cleaning of semiconductive material. Subclasses 2 and 3 are noted for chemical bleaching, oxidation, or reduction of a metallic siliceous or calcareous base.

2. CLASS 204 CHEMISTRY: ELECTRICAL AND WAVE ENERGY and CLASS 205 ELECTROLYSIS: PROCESSES, COMPOSITIONS USED THEREIN AND METHODS OF PREPARING THE COMPOSITIONS

Chemical etching performed on a composition, product, or article made by a Class 204 process (e.g., an entire article previously etched by electrolysis, a product portion modified by electrolytic material treatment, etc.) is considered to provide a significant modification of the composition, product, or article made by the Class 204 process, therefore placing the combination of a Class 204 process followed by Class 216 chemical etching in Class 216. However, the combination of a Class 205 electrolytic coating step followed by Class 216 chemical etching performed (1) to allow at least a portion of the electrolytic coating to remain and (2) to only significantly modify the electrolytic coating, per se, is considered to be an electrolytic coating process followed by a mere perfecting step for the electrolytic coating, therefore placing the combination in Class 205. The significant modification of only the electrolytic coating allows for mere incidental alterations to other portions of a coated article such as the substrate provided that such changes are clearly unintentional (e.g., chemical etching through an electrolytic coating which may also progress into the substrate in some areas to allow complete penetration through all desired other areas of the electrolytic coating, etc.). Class 216 also provides for the original classification when the claims are alternative (claims to a Class 216 process and claims to a Class 205 electrolytic etching, or when a generic claim is present and no species is specifically claimed). When, however, a generic claim is present (disclosure includes both Class 216 and Class 204 or Class 205 subject matter) and a Class 204 or Class 205 species is specifically claimed, and there is no specific claim to a Class 216 etching process, the original classification is in Class 204 or Class 205 and a mandatory cross-reference is placed into Class 216 based on the generic claim.

Other combinations of Class 204 step(s) with Class 216 step(s) will follow the general class line for the combination of Class 204 step(s) with those from other classes as stated at the beginning of Class 204. In particular, see Class 205, subclasses 123+, for electrolytic coating of or with semiconductor material, subclasses 125+ for electrolytic coating to produce a circuit board or a printed circuit, subclasses 206+ for contacting a substrate with a solid member or material (e.g., polishing, rolling, etc.) combined with a subsequent step of electrolytic coating, subclasses 210+ for treating a substrate with a liquid other than tap water (e.g., chemical etching, etc.) combined with a subsequent step of electrolytic coating, subclasses 640+ for electrolytic erosion of a workpiece to change the shape or surface configuration thereof, and subclasses 687+ for electrolytic material treatment, in general (e.g., electrolytic stripping of an entire coated layer from a substrate, etc.).

3. CLASS 219 ELECTRIC HEATING

See Class 219, subclasses 121.36+ for removing or altering material by the use of a high temperature thermal plasma. Class 216 provides for the use of a cold plasma which is a chemical etching process involving reactive ions and a substrate whereas the high temperature thermal plasma proper for Class 219 alters the substrate solely by thermal means. Class 219 subclasses 68+ provide for processes of cutting or disintegrating metal by metal heating, subclasses 121.19+ for processes of using an electron beam or etching or trimming metal, subclasses 121.36+ for processes of using a high temperature thermal plasma to etch metal, and subclasses 121.6+ for processes of using a laser to etch metal.

4. CLASS 264 PLASTIC AND NONMETALLIC ARTICLE SHAPING OR TREATING: PROCESSES

Combinations of shaping a plastic material and etching the shaped product, or combinations of shaping, laminating, and etching are proper for Class 216. Laser ablation of a Class 264 material in the absence of an added reactive chemical is proper for Class 264, however, when a reactive chemical is used in the laser ablation process the process is classifiable in Class 216. Subclasses 22+ for the shaping of an article by removing a portion by electrical or wave energy, e.g., laser ablation wherein no chemical etchant is employed, etc., subclass 49 for forming pores in situ by treating an occluded solid, subclasses 82+ for reactive gas or vapor treatment of an article, subclasses 211.12+ for processing or treating after extruding, subclasses 219+ for processes of preparing a mold which includes an etching step in the mold manufacture followed by a shaping operation, and subclass 341 for the solvent polishing of a shaped or solid article.

5. CLASS 427 COATING PROCESSES

Subclasses 307+ for processes limited to etching for making a base more compatible with or adherent to the coating wherein the base is the substrate (work) onto which a coating is to applied.

6. CLASS 430 RADIATION IMAGERY CHEMISTRY: PROCESS, COMPOSITION, OR PRODUCT THEREOF

For processes of radiation imagery including claimed exposing and finishing by a post imaging process, e.g., developing, etching, etc. or finishing an image, e.g., developing, etching, etc. where the claim is silent as to an exposure step.

Subclass 5 for producing a radiation mask, subclasses 313+ for a post imaging process of treating a resist to remove a portion of the same.

SECTION III - REFERENCES TO OTHER CLASSES

SEE OR SEARCH CLASS:

SECTION IV - GLOSSARY

Terms used throughout the schedule and definitions are to have the meaning ascribed below.

Generally accepted or commonly used art terms retain their meaning found in their everyday usage and are not found in this glossary. Certain specialized terms are employed in these subclasses and they have been given definitions altered to meet the needs of this class. Some or all of the terms may be broader or more restricted as well as different in meaning compared to normal usage.

ACID

A chemical compound which yields hydrogen ions when dissolved in water, whose hydrogen can be replaced by metals or basic radicals, or which reacts with bases to form salts and water (neutralization).

GAS

Matter of very low density and viscosity, and relatively great expansion and contraction with changes in pressure and temperature, that is readily diffusive, with a tendency to expand indefinitely, with molecules or atoms in free movement. The term gas includes vapor.

GLASS

Must have all of the attributes described in 1-5 below:

(1) An inorganic product the constituents of which generally include a glass former (e.g., As2O3, B2O3, GeO2, P2O5, SiO2, V2O5) which has an essential characteristic of creating or maintaining, singularly, or in a mixture that type of structural disorder characteristic of a glassy condition, other oxides which approach glass forming properties (e.g., Al2O3, BeO, PbO, Sb2O3, TiO2, ZnO, and ZrO2), as well as oxides that are practically devoid of glass forming tendencies (e.g. BaO, CaO, K2O, Li2O, MgO, Na2O, and SrO). Pure and modified silica, silicon, and slag are also included.

(2) Formed by fusion and cooled to a rigid condition generally without crystallization.

(3) Having no definite melting point, whereby the mass has the characteristic of passing through a plastic state before reaching a liquid state when heated.

(4) Incapable in the solid state of permanent deformation.

(5) Fractures when subject to deformation tension.

INORGANIC

Pertaining to compounds that do not generally contain carbon and to elements in their free form. It relates to any of the compounds not encompassed under the term Organic defined below in this Glossary.

METAL

As found in the periodic table of the elements, is any element not named in the following listing, all group VIII, VIIB, VIB elements except polonium, nitrogen, phosphorus, carbon, silicon, and boron.

ORGANIC

Is a compound containing carbon, which is further characterized by the presence in the molecule of two carbon atoms bonded together; or one atom of carbon bonded to at least one atom of hydrogen or halogen; or one atom of carbon bonded to at least one atom of nitrogen by a single or double bond. The following compounds are specifically excluded as being Organic for classification purposes, to-wit: hydrocyanic acid, cyanogen, isocyanic acid, cyanamide, cyanogen halides, isothiocyanic acid, fulminic acid, and metal carbides.

PLASMA

A gas that is sufficiently ionized for its properties to depend on the ionization. It contains approximately equal numbers of positive ions and electrons, so the mixture is electrically neutral, highly conductive, and affected by magnetic fields. A thermal plasma is produced by temperatures above 20,000 degrees centigrade.

RADIATION

The propagation of energy through space or through a material. It may be in the form of electromagnetic waves, corpuscular emissions or sound waves. The format is usually categorized according to frequency, e.g., Hertzian, infrared, visible light, ultraviolet, X-ray, gamma ray, etc. Corpuscular emissions are categorized as alpha, beta, or cosmic rays.

SUBSTRATE

The entire article or workpiece contacted by the chemical reagent, except for materials which have been applied to an article or workpiece for the sole expressed purpose of protecting at least a portion thereof from the action of the chemical material, i.e., a resist.

SUBCLASSES

2	ETCHING OF SEMICONDUCTOR MATERIAL TO PRODUCE AN ARTICLE HAVING A NONELECTRICAL FUNCTION:
	This subclass is indented under the class definition.  Process of etching a semiconductive precursor, substrate, or device to produce an article whose function is not related to the conduction of electricity. (1) Note. This subclass is directed to the manufacture of a semiconductor containing article which has a stated function which is nonelectrical in nature, e.g., pressure diaphragm, spring, or coil, etc. SEE OR SEARCH CLASS: 438,  Semiconductor Device Manufacturing: Process,   for (a) combined processes and (b) unit operation not elsewhere provided for manufacturing a semiconductive electrical substrate or device.

3	FORMING OR TREATING JOSEPHSON JUNCTION ARTICLE:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of a superconductive material which is joined in a Josephson Junction containing a pair of superconductive electrodes which are separated by a thin, less conductive portion through which superconductor tunneling may occur. SEE OR SEARCH CLASS: 257,  Active Solid-State Devices (e.g., Transistors, Solid-State Diodes),   subclasses 31+ for a Josephson Junction device. 505,  Superconductor Technology: Apparatus, Material, Process,   subclass 329 and subclasses 410+ for the use of high temperature superconductor material in applications, apparatus, and the materials, per se, not provided for elsewhere.

4	FORMING OR TREATING A SIGN OR MATERIAL USEFUL IN A SIGN:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of a sign for the display of intelligence by way of symbols or for material useful in preparing a sign. SEE OR SEARCH THIS CLASS, SUBCLASS: 8, for forming or treating a cylindrical or tubular article having pattern or design on its surface. SEE OR SEARCH CLASS: 40,  Card, Picture, or Sign Exhibiting,   subclasses 541+ for an illuminated sign.

5	Sign or material is electroluminescent:
	This subclass is indented under subclass 4.  Process wherein the sign or material adiabatically emits light in an electric field.

6	FORMING OR TREATING MATERIAL USEFUL IN A CAPACITOR:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of materials that may be used in a device composed of two conductors separated by a dielectric capable of storing electrical energy blocking the flow of direct current to a degree dependent upon the capacitance and the frequency. SEE OR SEARCH CLASS: 29,  Metal Working,   for making special articles as defined in the etching class definition, note subclass 25.03 for electrolytic device making, e.g., capacitor, etc., and subclasses 25.41+ for electric condenser making. 174,  Electricity: Conductors and Insulators,   subclass 143 for bushing-type condenser. 361,  Electricity: Electrical Systems and Devices,   subclasses 268+ for induction apparatus combined with electrical capacitors, subclasses 271+ for electrostatic capacitors, subclasses 277+ for variable-type electrical capacitors, and subclasses 500+ for electrolytic-type condensers.

7	FORMING OR TREATING FIBROUS ARTICLE OR FIBER REINFORCED COMPOSITE STRUCTURE:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an article or structure containing fibers.

8	FORMING OR TREATING CYLINDRICAL OR TUBULAR ARTICLE HAVING PATTERN OR DESIGN ON ITS SURFACE:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of a cylindrical or tubular article having a pattern or design on the article surface, e.g., pattern roll, etc. SEE OR SEARCH CLASS: 205,  Electrolysis: Processes, Compositions Used Therein, and Methods of Preparing the Compositions,   subclass 118 for electrolytic coating of selected areas. 427,  Coating Processes,   subclasses 256+ for nonuniform coating.

9	Forming or treating an embossing cylinder or tubular article:
	This subclass is indented under subclass 8.  Process wherein the cylinder or tubular article has a design or pattern raised in relief above its surface and which is intended to impress the design or pattern on other work.

10	Forming or treating liquid transfer cylinder or tubular article (e.g. printing roll, etc.):
	This subclass is indented under subclass 8.  Process wherein the cylinder or tubular article is intended to transfer liquid. SEE OR SEARCH CLASS: 101,  Printing,   subclasses 212+ for rolling contact printing machines.

11	FORMING OR TREATING AN ARTICLE WHOSE FINAL CONFIGURATION HAS A PROJECTION:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an article whose final shape has at least one raised area above the normal planar surface, e.g.; pointer, sound needle, etc. SEE OR SEARCH CLASS: 438,  Semiconductor Device Manufacturing: Process,   subclass 20 for manufacturing an electron emissive device utilizing a semiconductive substrate. 445,  Electric Lamp or Space Discharge Component or Device Manufacturing,   subclasses 46+ for making an electrode having a projection. 604,  Surgery,   subclasses 187+ for an aspirator syringe or injector.

12	FORMING OR TREATING MASK USED FOR ITS NONETCHING FUNCTION (E.G., SHADOW MASK, X-RAY MASK, ETC.):
	This subclass is indented under the class definition.  Process wherein etching is used in forming or treating a mask whose function is other than as an etch mask or etch resist, e.g., shadow mask, X-ray mask, etc. SEE OR SEARCH THIS CLASS, SUBCLASS: 41+, for the masking of a substrate using an etch resist. 56, for making a porous or perforated article not used for masking. SEE OR SEARCH CLASS: 378,  X-Ray or Gamma Ray Systems or Devices,   subclass 35 for mask used in a nonetching function. 430,  Radiation Imagery Chemistry: Process, Composition, or Product Thereof,   subclass 5 for a radiation mask produced by a photos:graphic step.

13	FORMING OR TREATING ELECTRICAL CONDUCTOR ARTICLE (E.G., CIRCUIT, ETC.):
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an electrical conductor. (1) Note. The conductor maybe either a self sustaining conductor or a conductor on a supporting substrate, e.g., a printed circuit, etc. SEE OR SEARCH CLASS: 205,  Electrolysis: Processes, Compositions Used Therein, and Methods of Preparing the Compositions,   subclass 125 where the product is a circuit board or printed circuit. 427,  Coating Processes,   subclasses 96.1 through 99.5for a process of coating a substrate to produce an integrated or printed circuit or circuit board. 428,  Stock Material or Miscellaneous Articles,   cross-reference art collection 901 for a printed circuit.

14	Forming or treating lead frame or beam lead:
	This subclass is indented under subclass 13.  Process directed to the forming or treating of (a) a group of metal leads held together in the proper relationship to permit connection to a semiconductor die (integrated circuit), or (b) an intermediate article of manufacture utilized to produce electrical connecting structure for circuits consisting of a generally flat electrically conductive strap or band section which has been stamped, cut or otherwise deformed, to produce an open encasing structure provided with a plurality of generally rectangular cross-sectional inwardly facing bodies designed to be attached to the circuit in a cantilever fashion. SEE OR SEARCH CLASS: 29,  Metal Working,   subclass 827 for beam lead frame or beam lead device manufacturing including a metal working step.

15	Forming or treating a crossover:
	This subclass is indented under subclass 13.  Process directed to the forming or treating of a circuit where one conductor crosses over another without electrical contact due to the presence of an insulator therebetween.

16	Forming or treating resistive material:
	This subclass is indented under subclass 13.  Process directed to the forming or treating of material which is generally used in a circuit containing a conductor, and which material is intended to impede the flow of a steady or fluctuating electrical current passing through the mass by conversion of electrical energy to heat. SEE OR SEARCH CLASS: 29,  Metal Working,   subclass 610.1 for resistor making and subclass 621.1 for electrical strain gauge making. 252,  Compositions,   subclasses 500+ for an electrically conductive or emissive composition. 257,  Active Solid-State Devices (e.g., Transistors, Solid-State Diodes),   which include resistive materials in their construction. 338,  Electrical Resistors,   for electrical resistor structure.

17	Forming or treating of groove or through hole:
	This subclass is indented under subclass 13.  Process directed to forming or treating (a) a depression of relatively small area which is formed partially or completely through an electrical conductor or a substrate supporting an electrical circuit, or (b) an elongated relatively narrow trench which is partially or completely through an electrical conductor or substrate.

18	Filling or coating of groove or through hole with a conductor to form an electrical interconnection:
	This subclass is indented under subclass 17.  Process directed to filling or coating of groove or through hole with an electrically conductive material so as to provide an electrical interconnection in a circuit.

19	Filling or coating of groove or through hole in a conductor with an insulator:
	This subclass is indented under subclass 17.  Process directed to filling or coating of groove or through hole with an insulator to thus form an insulated region in or on a conductor.

20	Adhesive or autogenous bonding of self-sustaining preforms (e.g., prefabricated base, etc.):
	This subclass is indented under subclass 13.  Process including a step of adhesively or autogeneously bonding two or more self-sustaining preforms and wherein the final product contains the two or more adhered layers. (1) Note. A preformed etching mask or resist is not considered as being a preform proper for this subclass if it ultimately to be removed. See subclasses 41+ for etching processes involving a preformed etch mask or resist.

21	Repairing circuit:
	This subclass is indented under subclass 13.  Process directed to the refurbishing, repairing, or recovery of a circuit as to its electrical function.

22	FORMING OR TREATING ARTICLE CONTAINING MAGNETICALLY RESPONSIVE MATERIAL:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an article which contains material therein which is responsive to magnetism. SEE OR SEARCH CLASS: 29,  Metal Working,   subclasses 607+ for the making of permanent magnets and electromagnets.

23	FORMING OR TREATING ARTICLE CONTAINING A LIQUID CRYSTAL MATERIAL:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an article which contains an ordered liquid, i.e., liquid crystal. SEE OR SEARCH CLASS: 252,  Compositions,   subclasses 299.01+ for liquid crystal compositions. 428,  Stock Material or Miscellaneous Articles,   subclass 1 for liquid crystal containing stock material. 438,  Semiconductor Device Manufacturing: Process,   subclass 30 for manufacturing a liquid crystal display device utilizing a semiconductive substrate having an electrical device formed therein or thereon.

24	FORMING OR TREATING OPTICAL ARTICLE:
	This subclass is indented under the class definition.  Process wherein etching is used in forming or treating of an article which is either responsive to light, e.g., visible, UV, etc. or which is intended to transmit, modify, or otherwise alter light, e.g., visible, UV, etc. SEE OR SEARCH CLASS: 65,  Glass Manufacturing,   subclasses 37+ for lens making. 264,  Plastic and Nonmetallic Article Shaping or Treating: Processes,   subclasses 1.1+ for optical article shaping or treating. 430,  Radiation Imagery Chemistry: Process, Composition, or Product Thereof,   subclass 321 for optical device manufacturing using an imaging technique.

25	Phosphor screen:
	This subclass is indented under subclass 24.  Process wherein the optical article is a screen containing phosphor elements, these elements phosphorescing (continuous emission of light) when stimulated by an external energy source which is usually radiation. SEE OR SEARCH CLASS: 250,  Radiant Energy,   subclasses 458.1+ for luminophor irradiation, and subclasses 483.1+ for luminescent device. 252,  Compositions,   subclass 301.16 for an organic luminescent material containing composition, subclass 301.4 for an inorganic luminescent composition. 313,  Electric Lamp and Discharge Devices,   subclasses 525+ for a device containing a phosphor screen.

26	Lens:
	This subclass is indented under subclass 24.  Process wherein the optical article contains transparent material which converges or diverges light by refraction.

27	FORMING OR TREATING THERMAL INK JET ARTICLE (E.G., PRINT HEAD, LIQUID JET RECORDING HEAD, ETC.):
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an article whose ultimate use is to expel an ink droplet, and in which the ink droplet is produced by the action of thermal energy to form a propelling vapor. SEE OR SEARCH CLASS: 346,  Recorders,   subclass 1.1 for processes of using thermal ink jet devices, subclass 75 for the use of a gas blast against a receiver in printing. 438,  Semiconductor Device Manufacturing: Process,   subclass 21 for manufacturing an electrical device controlled printhead utilizing a semiconductive substrate having an electrical device formed therein or thereon.

28	FORMING OR TREATING AN ORNAMENTED ARTICLE:
	This subclass is indented under the class definition.  Process wherein etching is used in the forming or treating of an article, which article possesses an effect which is intended to be decorative in nature, and which effect possess little or no utilitarian function or character, and wherein the article itself may or may not possess some form of utility. SEE OR SEARCH CLASS: 63,  Jewelry,   for ornamented jewelry.

29	Wood surface treated or wood grain produced:
	This subclass is indented under subclass 28.  Process wherein the treating is performed on the surface of a wood product to produce a decorative wood product, or wherein a nonwood product is treated to produce a wood grain appearance.

30	Treating stone (e.g., marble, etc.):
	This subclass is indented under subclass 28.  Process wherein stone is treated, to produce a decorative effect thereon, e.g., marble, etc.

31	Treating glass (e.g., mirror, etc.):
	This subclass is indented under subclass 28.  Process wherein glass is treated to produce a decorative effect thereon, e.g., mirror, etc. SEE OR SEARCH THIS CLASS, SUBCLASS: 80, for etching of a silicon containing glass by a gas phase etchant. 97, for etching of glass by nonliquid phase etchant. 99, for etching of a silicon containing substrate by a nonliquid phase etchant. SEE OR SEARCH CLASS: 65,  Glass Manufacturing,   subclass 31 for etching or leaching of glass preform in combination with a glass manufacturing step.

32	Treating elemental metal or alloy thereof:
	This subclass is indented under subclass 28.  Process wherein metal or an thereof is treated to produce a decorative effect thereon.

33	ADHESIVE OR AUTOGENOUS BONDING OF TWO OR MORE SELF-SUSTAINING PREFORMS WHEREIN AT LEAST TWO OF THE PREFORMS ARE NOT INTENDED TO BE REMOVED (E.G., PREFABRICATED BASE, ETC.):
	This subclass is indented under the class definition.  Process s including the step of adhesively or autogenously bonding two or more self sustaining preforms. (1) Note. A preformed etching mask or resist is not considered as being a preform proper for this subclass if it is ultimately to be removed. See subclasses 41+ for etching processes involving a preformed etch mask or resist. (2) Note. Processes appropriate for this subclass require the forming of intended composite materials having two or more layers and wherein the final intended material is a composite having two or more layers. A multilayered substrate as a preform without the claimed forming of the multilayers by adhesive or autogenous bonding is not appropriate herein unless a self-sustaining preform is bonded thereto and remains with the multilayered substrate. Removing the self-sustaining preform (etch mask or resist) after the etching process results in a product which does not meet the required parameters for this subclass. SEE OR SEARCH CLASS: 29,  Metal Working,   for mechanical assembly combined with etching of special articles. 156,  Adhesive Bonding and Miscellaneous Chemical Manufacture,   for adhesive bonding or laminating without etching.

34	Etching improves or promotes adherence of preforms being bonded:
	This subclass is indented under subclass 33.  Process wherein etching is used to improve or promote adherence or bonding between two or more preforms. (1) Note. Included herein is the use of etching to improve or promote the adherence of an adhesive and a preform.

35	Bonding of preform of metal or an alloy thereof to a preform of a nonmetal:
	This subclass is indented under subclass 34.  Process of improving or promoting the adherence or bonding of a preform of metal or an alloy thereof to a nonmetal preform.

36	Removing at least one of the self-sustaining preforms or a portion thereof:
	This subclass is indented under subclass 33.  Process wherein a delamination occurs between any two or more laminated preforms. (1) Note. The preform or portion delaminated may be the same or different from the preform bonded initially. An example of a different preform is one which has been chemically treated after it has been united and then removed.

37	ETCHING AND COATING OCCUR IN THE SAME PROCESSING CHAMBER:
	This subclass is indented under the class definition.  Process wherein etching and coating occur in the same vessel. SEE OR SEARCH CLASS: 427,  Coating Processes,   for etching used to perfect a coating operation.

38	PLANARIZING A NONPLANAR SURFACE:
	This subclass is indented under the class definition.  Process directed to the smoothing or leveling of a surface. (1) Note. The planarizing may include the use of a planarizing coating layer.

39	FORMING GROOVE OR HOLE IN A SUBSTRATE WHICH IS SUBSEQUENTLY FILLED OR COATED:
	This subclass is indented under the class definition.  Process directed to the filling or coating of a groove or hole in a substrate after the groove or hole is formed.

40	FORMING PATTERN USING LIFT OFF TECHNIQUE:
	This subclass is indented under the class definition.  Process directed to placing a mask on a substrate, coating, or depositing material over the mask and substrate, then removing the mask to remove the deposited layer on the mask, thus leaving the deposited layer in a pattern where the mask was not present, and etching using the pattern as a mask. (1) Note. Any means of removal may be used to include dissolution.

41	MASKING OF A SUBSTRATE USING MATERIAL RESISTANT TO AN ETCHANT (I.E., ETCH RESIST):
	This subclass is indented under the class definition.  Process directed to using a patterned material which is resistant to the etchant. (1) Note. This subclass rather than subclass 49 and subclass 51 specifically provides for etch resistant material where the disclosure of the patent is silent as to whether the material is organic or inorganic in nature. SEE OR SEARCH THIS CLASS, SUBCLASS: 56, for making a porous or perforated article having a nonmasking function. SEE OR SEARCH CLASS: 430,  Radiation Imagery Chemistry: Process, Composition, or Product Thereof,   subclass 5 for a radiation mask.

42	Resist material applied in particulate form or spray:
	This subclass is indented under subclass 41.  Process wherein the masking is applied by a coating process involving the application of particulate material or by a spray coating procedure.

43	Adhesively bonding resist to substrate:
	This subclass is indented under subclass 41.  Process wherein the masking is applied by adhesively bonding a self-sustaining patterned resist to a substrate. SEE OR SEARCH CLASS: 156,  Adhesive Bonding and Miscellaneous Chemical Manufacture,   for production of bonded materials.

44	Mechanically forming pattern into a resist:
	This subclass is indented under subclass 41.  Process directed to the forming of